memcg, kmem: fix reference count handling on the error path

commit f37a96914d1aea10fed8d9af10251f0b9caea31b upstream.

mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails.
This is not correct because only memcg_propagate_kmem takes an
additional reference while mem_cgroup_sockets_init is allowed to fail as
well (although no current implementation fails) but it doesn't take any
reference.  This all suggests that it should be memcg_propagate_kmem
that should clean up after itself so this patch moves mem_cgroup_put
over there.

Unfortunately this is not that easy (as pointed out by Li Zefan) because
memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is
marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if
memcg_propagate_kmem fails so the additional reference is dropped in
that case in kmem_cgroup_destroy which means that the reference would be
dropped two times.

The easiest way then would be to simply remove mem_cgrroup_put from
mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right
thing.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()

commit da331ba8e9c5de72a27e50f71105395bba6eebe0 upstream.

tasklet_kill() may sleep so call it before taking pch->lock.

Fixes following lockup:

  BUG: scheduling while atomic: cat/2383/0x00000002
  Modules linked in:
    unwind_backtrace+0x0/0xfc
    __schedule_bug+0x4c/0x58
    __schedule+0x690/0x6e0
    sys_sched_yield+0x70/0x78
    tasklet_kill+0x34/0x8c
    pl330_free_chan_resources+0x24/0x88
    dma_chan_put+0x4c/0x50
  [...]
  BUG: spinlock lockup suspected on CPU#0, swapper/0/0
   lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1
    unwind_backtrace+0x0/0xfc
    do_raw_spin_lock+0x194/0x204
    _raw_spin_lock_irqsave+0x20/0x28
    pl330_tasklet+0x2c/0x5a8
    tasklet_action+0xfc/0x114
    __do_softirq+0xe4/0x19c
    irq_exit+0x98/0x9c
    handle_IPI+0x124/0x16c
    gic_handle_irq+0x64/0x68
    __irq_svc+0x40/0x70
    cpuidle_wrap_enter+0x4c/0xa0
    cpuidle_enter_state+0x18/0x68
    cpuidle_idle_call+0xac/0xe0
    cpu_idle+0xac/0xf0

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: mm: fix boot on SA1110 Assabet

commit 319e0b4f02f73983c03a2ca38595fc6367929edf upstream.

Commit 83db0384 (mm/ARM: use common help functions to free reserved
pages) broke booting on the Assabet by trying to convert a PFN to
a virtual address using the __va() macro.  This macro takes the
physical address, not a PFN.  Fix this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: shmobile: emev2 GIO3 resource fix

commit 1eb14ea1e6bcd11d6d0ba937fc39808bb4d3453e upstream.

Fix GIO3 base addresses for EMEV2.

This bug was introduced by 088efd9273b5076a0aead479aa31f1066d182b3e
("mach-shmobile: Emma Mobile EV2 GPIO support V3") which was included in v3.5.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: shmobile: r8a73a4: Fix resources for SCIFB0

commit f820b60582f75e73e83b8505d7e48fe59770f558 upstream.

Fix base address and IRQ resources associated with SCIFB0.

This bug was introduced by e481a528901d0cd18b5b5fcbdc55207ea3b6ef68
("ARM: shmobile: r8a73a4 SCIF support V3") which was included in v3.10.

Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms+renesas@verge.net.au: Add information about commit and version
  this bug was added in ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx: cpus/cpu nodes dts updates

commit 7925e89f54fc49bcd1e73f0a65c4a3eb35b9cfb1 upstream.

This patch updates the in-kernel dts files according to the latest cpus
and cpu bindings updates for ARM.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs

commit cbbe6f82b489e7ceba4ad7c833bd3a76cd0084cb upstream.

When the local timer freq changed, the twd_update_frequency function
should be run all the CPUs include itself, otherwise, the twd freq will
not get updated and the local timer will not run correcttly.

smp_call_function will run functions on all other CPUs, but not include
himself, this is not correct,use on_each_cpu instead to fix this issue.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation

commit 0d0752bca1f9a91fb646647aa4abbb21156f316c upstream.

Looking into the active_asids array is not enough, as we also need
to look into the reserved_asids array (they both represent processes
that are currently running).

Also, not holding the ASID allocator lock is racy, as another CPU
could schedule that process and trigger a rollover, making the erratum
workaround miss an IPI.

Exposing this outside of context.c is a little ugly on the side, so
let's define a new entry point that the erratum workaround can call
to obtain the cpumask.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator

commit b8e4a4740fa2b17c0a447b3ab783b3dc10702e27 upstream.

On a CPU that never ran anything, both the active and reserved ASID
fields are set to zero. In this case the ASID_TO_IDX() macro will
return -1, which is not a very useful value to index a bitmap.

Instead of trying to offset the ASID so that ASID #1 is actually
bit 0 in the asid_map bitmap, just always ignore bit 0 and start
the search from bit 1. This makes the code a bit more readable,
and without risk of OoB access.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7767/1: let the ASID allocator handle suspended animation

commit ae120d9edfe96628f03d87634acda0bfa7110632 upstream.

When a CPU is running a process, the ASID for that process is
held in a per-CPU variable (the "active ASIDs" array). When
the ASID allocator handles a rollover, it copies the active
ASIDs into a "reserved ASIDs" array to ensure that a process
currently running on another CPU will continue to run unaffected.
The active array is zero-ed to indicate that a rollover occurred.

Because of this mechanism, a reserved ASID is only remembered for
a single rollover. A subsequent rollover will completely refill
the reserved ASIDs array.

In a severely oversubscribed environment where a CPU can be
prevented from running for extended periods of time (think virtual
machines), the above has a horrible side effect:

[P{a} denotes process P running with ASID a]

CPU-0 CPU-1

A{x} [active = <x 0>]

[suspended] runs B{y} [active = <x y>]

[rollover:
 active = <0 0>
 reserved = <x y>]

runs B{y} [active = <0 y>
 reserved = <x y>]

[rollover:
 active = <0 0>
 reserved = <0 y>]

runs C{x} [active = <0 x>]

[resumes]

runs A{x}

At that stage, both A and C have the same ASID, with deadly
consequences.

The fix is to preserve reserved ASIDs across rollovers if
the CPU doesn't have an active ASID when the rollover occurs.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Carinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 7765/1: perf: Record the user-mode PC in the call chain.

commit c5f927a6f62196226915f12194c9d0df4e2210d7 upstream.

With this change, we no longer lose the innermost entry in the user-mode
part of the call chain.  See also the x86 port, which includes the ip.

It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.

Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't allow ext4_free_blocks() to fail due to ENOMEM

commit e7676a704ee0a1ef71a6b23760b5a8f6896cb1a1 upstream.

The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory.  Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS.  And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.

Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't show usrquota/grpquota twice in /proc/mounts

commit ad065dd01662ae22138899e6b1c8eeb3a529964f upstream.

We now print mount options in a generic fashion in
ext4_show_options(), so we shouldn't be explicitly printing the
{usr,grp}quota options in ext4_show_quota_options().

Without this patch, /proc/mounts can look like this:

 /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0
                                      ^^^^^^^^              ^^^^^^^^

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix ext4_get_group_number()

commit 960fd856fdc3b08b3638f3f9b6b4bfceb77660c7 upstream.

The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e60b8.  Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero).  This could cause the
following kernel BUG:

[  568.877799] ------------[ cut here ]------------
[  568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[  568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[  568.877845] SMP NR_CPUS=32 NUMA pSeries
[  568.877852] Modules linked in: binfmt_misc
[  568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1
[  568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[  568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[  568.877879] REGS: c0000001fa956ed0 TRAP: 0700   Not tainted  (3.10.0-03216-g7c6809f-dirty)
[  568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 24000428  XER: 00000000
[  568.877902] SOFTE: 1
[  568.877905] CFAR: c0000000002b5464
[  568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[  568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[  568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[  568.878004] Call Trace:
[  568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[  568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[  568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[  568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[  568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[  568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[  568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[  568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[  568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[  568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[  568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[  568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[  568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[  568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[  568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[  568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[  568.878125] Instruction dump:
[  568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[  568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[  568.878160] ---[ end trace 594d911d9654770b ]---

In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflow when counting used blocks on 32-bit architectures

commit 8af8eecc1331dbf5e8c662022272cf667e213da5 upstream.

The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix data offset overflow in ext4_xattr_fiemap() on 32-bit archs

commit a60697f411eb365fb09e639e6f183fe33d1eb796 upstream.

On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflows in SEEK_HOLE, SEEK_DATA implementations

commit e7293fd146846e2a44d29e0477e0860c60fb856b upstream.

ext4_lblk_t is just u32 so multiplying it by blocksize can easily
overflow for files larger than 4 GB. Fix that by properly typing the
block offsets before shifting.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix data offset overflow on 32-bit archs in ext4_inline_data_fiemap()

commit eaf3793728d07d995f1e74250b2d0005f7ae98b5 upstream.

On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: only do the tree_mod_log_free_eb if this is our last ref

commit 7fb7d76f96bfcbea25007d190ba828b18e13d29d upstream.

There is another bug in the tree mod log stuff in that we're calling
tree_mod_log_free_eb every single time a block is cow'ed.  The problem with this
is that if this block is shared by multiple snapshots we will call this multiple
times per block, so if we go to rewind the mod log for this block we'll BUG_ON()
in __tree_mod_log_rewind because we try to rewind a free twice.  We only want to
call tree_mod_log_free_eb if we are actually freeing the block.  With this patch
I no longer hit the panic in __tree_mod_log_rewind.  Thanks,

Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: hold the tree mod lock in __tree_mod_log_rewind

commit f1ca7e98a67da618d8595866e0860308525154da upstream.

We need to hold the tree mod log lock in __tree_mod_log_rewind since we walk
forward in the tree mod entries, otherwise we'll end up with random entries and
trip the BUG_ON() at the front of __tree_mod_log_rewind.  This fixes the panics
people were seeing when running

find /whatever -type f -exec btrfs fi defrag {} \;

Thansk,

Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix estale with btrfs send

commit 139f807a1eba1e484941a98fb93ee32ad859a6a1 upstream.

This fixes bugzilla 57491.  If we take a snapshot of a fs with a unlink ongoing
and then try to send that root we will run into problems.  When comparing with a
parent root we will search the parents and the send roots commit_root, which if
we've just created the snapshot will include the file that needs to be evicted
by the orphan cleanup.  So when we find a changed extent we will try and copy
that info into the send stream, but when we lookup the inode we use the normal
root, which no longer has the inode because the orphan cleanup deleted it.  The
best solution I have for this is to check our otransid with the generation of
the commit root and if they match just commit the transaction again, that way we
get the changes from the orphan cleanup.  With this patch the reproducer I made
for this bugzilla no longer returns ESTALE when trying to do the send.  Thanks,

Reported-by: Chris Wilson <jakdaw@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer: Fix jiffies wrap behavior of round_jiffies_common()

commit 9e04d3804d3ac97d8c03a41d78d0f0674b5d01e1 upstream.

Direct compare of jiffies related values does not work in the wrap
around case. Replace it with time_is_after_jiffies().

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/519BC066.5080600@acm.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: remove pmp link online check in FBS EH

commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream.

ata_link_online() check in ahci_error_intr() is unnecessary, it should
be removed otherwise may lead to lockup with FBS enabled PMP.
http://marc.info/?l=linux-ide&m=137050421603272&w=2

Reported-by: Yu Liu <liuyu.ac@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs

commit 1cfc7df3de10c40ed459e13cce6de616023bf41c upstream.

This patch adds the AHCI-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add AMD CZ SATA device ID

commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: wake the queue if stopped when being unmapped

commit 8a487b1a7432b20ff3f82387a8ce7555a964b44e upstream.

When the queue is unmapped while it was so loaded that
mac80211's was stopped, we need to wake the queue after
having freed all the packets in the queue.
Not doing so can result in weird stuff like:

* run lots of traffic (mac80211's queue gets stopped)
* RFKILL
* de-assert RFKILL
* no traffic

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: fix race in queue unmapping

commit b967613d7e7c7bad176f5627c55e2d8c5aa2480e upstream.

When a queue is disabled, it frees all its entries. Later,
the op_mode might still get notifications from the firmware
that triggers to free entries in the tx queue. The transport
should be prepared for these races and know to ignore
reclaim calls on queues that have been disabled and whose
entries have been freed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix refcount issue in pci_create_root_bus() error recovery path

commit 343df771e671d821478dd3ef525a0610b808dbf8 upstream.

After calling device_register(&bridge->dev), the bridge is reference-
counted, and it is illegal to call kfree() on it except in the release
function.

[bhelgaas: changelog, use put_device() after device_register() failure]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Finish SR-IOV VF setup before adding the device

commit fbf33f516bdbcc2ab1ba1e54dfb720b0cfaa6874 upstream.

Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible"
moves device registering from pci_bus_add_devices() to pci_device_add().
That causes problems for virtual functions because device_add(&virtfn->dev)
is called before setting the virtfn->is_virtfn flag, which then causes Xen
to report PCI virtual functions as PCI physical functions.

Fix it by setting virtfn->is_virtfn before calling pci_device_add().

[Jiang Liu]: Move the setting of virtfn->is_virtfn ahead further for better
readability and modify changelog.

Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: correct disconnect behavior

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream.

Currently, when a disconnect is requested by the user (via NBD_DISCONNECT
ioctl) the return from NBD_DO_IT is undefined (it is usually one of
several error codes).  This means that nbd-client does not know if a
manual disconnect was performed or whether a network error occurred.
Because of this, nbd-client's persist mode (which tries to reconnect after
error, but not after manual disconnect) does not always work correctly.

This change fixes this by causing NBD_DO_IT to always return 0 if a user
requests a disconnect.  This means that nbd-client can correctly either
persist the connection (if an error occurred) or disconnect (if the user
requested it).

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: xattr: fix inlined xattr reflink

commit ef962df057aaafd714f5c22ba3de1be459571fdf upstream.

Inlined xattr shared free space of inode block with inlined data or data
extent record, so the size of the later two should be adjusted when
inlined xattr is enabled.  See ocfs2_xattr_ibody_init().  But this isn't
done well when reflink.  For inode with inlined data, its max inlined
data size is adjusted in ocfs2_duplicate_inline_data(), no problem.  But
for inode with data extent record, its record count isn't adjusted.  Fix
it, or data extent record and inlined xattr may overwrite each other,
then cause data corruption or xattr failure.

One panic caused by this bug in our test environment is the following:

  kernel BUG at fs/ocfs2/xattr.c:1435!
  invalid opcode: 0000 [#1] SMP
  Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1
  RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2]
  RSP: e02b:ffff88007a587948  EFLAGS: 00010283
  RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4
  RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68
  RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010
  R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68
  FS:  00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
  CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process multi_reflink_t
  Call Trace:
    ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2]
    ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2]
    ocfs2_xa_set+0xcc/0x250 [ocfs2]
    ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2]
    __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2]
    ocfs2_xattr_set+0x6c6/0x890 [ocfs2]
    ocfs2_xattr_user_set+0x46/0x50 [ocfs2]
    generic_setxattr+0x70/0x90
    __vfs_setxattr_noperm+0x80/0x1a0
    vfs_setxattr+0xa9/0xb0
    setxattr+0xc3/0x120
    sys_fsetxattr+0xa8/0xd0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch: c6x: mm: include "asm/uaccess.h" to pass compiling

commit fe74650166dd6905b0cf66594eb79222dc9d7109 upstream.

Need include "asm/uaccess.h" to pass compiling.

The related error (with allmodconfig):

  arch/c6x/mm/init.c: In function `paging_init':
  arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration]
  arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function)
  arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: bcm5974 - add support for the 2013 MacBook Air

commit 148c1c8ad3c4170186ebe6ea5900adde27d2a0e7 upstream.

The June 2013 Macbook Air (13'') has a new trackpad protocol; four new
values are inserted in the header, and the mode switch is no longer
needed. This patch adds support for the new devices.

Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: apple: Add support for the 2013 Macbook Air

commit 9d9a04ee758b4c1fcc7586d065cdde7a7607e156 upstream.

This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.

Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / PM: Fix corner case in acpi_bus_update_power()

commit 91bdad0b6237c25a7bf8fd4604d0cc64a2005a23 upstream.

The role of acpi_bus_update_power() is to update the given ACPI
device object's power.state field to reflect the current physical
state of the device (as inferred from the configuration of power
resources and _PSC, if available).  For this purpose it calls
acpi_device_set_power() that should update the power resources'
reference counters and set power.state as appropriate.  However,
that doesn't work if the "new" state is D1, D2 or D3hot and the
the current value of power.state means D3cold, because in that
case acpi_device_set_power() will refuse to transition the device
from D3cold to non-D0.

To address this problem, make acpi_bus_update_power() call
acpi_power_transition() directly to update the power resources'
reference counters and only use acpi_device_set_power() to put
the device into D0 if the current physical state of it cannot
be determined.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Do not use extended sleep registers unless HW-reduced bit is set

commit 7cec7048fe22e3e92389da2cd67098f6c4284e7f upstream.

Previous implementation incorrectly used the ACPI 5.0 extended
sleep registers if they were simply populated. This caused
problems on some non-HW-reduced machines. As per the ACPI spec,
they should only be used if the HW-reduced bit is set.  Lv Zheng,
ACPICA BZ 1020.

Reported-by: Daniel Rowe <bart@fathom13.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=54181
References: https://bugs.acpica.org/show_bug.cgi?id=1020
Bisected-by: Brint E. Kriebel <kernel@bekit.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan

commit eff9a4b62b14cf0d9913e3caf1f26f8b7a6105c9 upstream.

HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's
_REG method will access that region.  To allow the CMOS RTC region
handler to be installed before the EC _REG method is first invoked,
add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table.

References: https://bugzilla.kernel.org/show_bug.cgi?id=54621
Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: Add CMOS RTC Operation Region handler support

commit 2fa97feb4406c546b52e35b6b6c50cb8f63425d2 upstream.

On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and
the EC's _REG methord accesses that region.  Thus an appropriate
address space handler must be registered for that region before the
EC driver is loaded.

Introduce a mechanism for adding CMOS RTC address space handlers.
Register an ACPI scan handler for CMOS RTC devices such that, when
a device of that kind is detected during an ACPI namespace scan, a
common CMOS RTC operation region address space handler will be
installed for it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=54621
Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/rtc/rtc-rv3029c2.c: fix disabling AIE irq

commit 29ecd78c0fd6ee05f2c6b07b23823a6ae43c13ff upstream.

In the disable AIE irq code path, current code passes "1" to enable
parameter of rv3029c2_rtc_i2c_alarm_set_irq().  Thus it does not disable
AIE irq.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Fix can_request_irq() for IRQs without an action

commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream.

Commit 02725e7471b8 ('genirq: Use irq_get/put functions'),
inadvertently changed can_request_irq() to return 0 for IRQs that have
no action.  This causes pcibios_lookup_irq() to select only IRQs that
already have an action with IRQF_SHARED set, or to fail if there are
none.  Change can_request_irq() to return 1 for IRQs that have no
action (if the first two conditions are met).

Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Tested-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> (against 3.2)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 709647@bugs.debian.org
Link: http://bugs.debian.org/709647
Link: http://lkml.kernel.org/r/1372383630.23847.40.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pcifront: Deal with toolstack missing 'XenbusStateClosing' state.

commit 098b1aeaf4d6149953b8f1f8d55c21d85536fbff upstream.

There are two tool-stack that can instruct the Xen PCI frontend
and backend to change states: 'xm' (Python code with a daemon),
and 'xl' (C library - does not keep state changes).

With the 'xm', the path to disconnect a single PCI device (xm pci-detach
<guest> <BDF>) is:

4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected)->5(Closing*).

The * is for states that the tool-stack sets. For 'xl', it is similar:

4(Connected)->7(Reconfiguring*)-> 8(Reconfigured)-> 4(Connected)

Both of them also tear down the XenBus structure, so the backend
state ends up going in the 3(Initialised) and calls pcifront_xenbus_remove.

When a PCI device is plugged back in (xm pci-attach <guest> <BDF>)
both of them follow the same pattern:

2(InitWait*), 3(Initialized*), 4(Connected*)->4(Connected).

[xen-pcifront ignores the 2,3 state changes and only acts when
4 (Connected) has been reached]

Note that this is for a _single_ PCI device. If there were two
PCI devices and only one was disconnected 'xm' would show the same
state changes.

The problem is that git commit 3d925320e9e2de162bd138bf97816bda8c3f71be
("xen/pcifront: Use Xen-SWIOTLB when initting if required") introduced
a mechanism to initialize the SWIOTLB when the Xen PCI front moves to
Connected state. It also had some aggressive seatbelt code check that
would warn the user if one tried to change to Connected state without
hitting first the Closing state:

 pcifront pci-0: PCI frontend already installed!

However, that code can be relaxed and we can continue on working
even if the frontend is instructed to be the 'Connected' state with
no devices and then gets tickled to be in 'Connected' state again.

In other words, this 4(Connected)->5(Closing)->4(Connected) state
was expected, while 4(Connected)->.... anything but 5(Closing)->4(Connected)
was not. This patch removes that aggressive check and allows
Xen pcifront to work with the 'xl' toolstack (for one or more
PCI devices) and with 'xm' toolstack (for more than two PCI
devices).

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
[v2: Added in the description about two PCI devices]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/time: remove blocked time accounting from xen "clockchip"

commit 0b0c002c340e78173789f8afaa508070d838cf3d upstream.

... because the "clock_event_device framework" already accounts for idle
time through the "event_handler" function pointer in
xen_timer_interrupt().

The patch is intended as the completion of [1]. It should fix the double
idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to
stolen time accounting (the removed code seems to be isolated).

The approach may be completely misguided.

[1] https://lkml.org/lkml/2011/10/6/10
[2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html

John took the time to retest this patch on top of v3.10 and reported:
"idle time is correctly incremented for pv and hvm for the normal
case, nohz=off and nohz=idle." so lets put this patch in.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, efi: retry ExitBootServices() on failure

commit d3768d885c6ccbf8a137276843177d76c49033a7 upstream.

ExitBootServices is absolutely supposed to return a failure if any
ExitBootServices event handler changes the memory map.  Basically the
get_map loop should run again if ExitBootServices returns an error the
first time.  I would say it would be fair that if ExitBootServices gives
an error the second time then Linux would be fine in returning control
back to BIOS.

The second change is the following line:

again:
        size += sizeof(*mem_map) * 2;

Originally you were incrementing it by the size of one memory map entry.
The issue here is all related to the low_alloc routine you are using.
In this routine you are making allocations to get the memory map itself.
Doing this allocation or allocations can affect the memory map by more
than one record.

[ mfleming - changelog, code style ]
Signed-off-by: Zach Bobroff <zacharyb@ami.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: optimize mtsp(0,sr) inline assembly

commit 92b59929825d67db575043a76651865d16873b36 upstream.

If the value which should be moved into a space register is zero, we can
optimize the inline assembly to become "mtsp %r0,%srX".

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix LMMIO mismatch between PAT length and MASK register

commit dac76f1be5beaea4af9afe85fb475c73de0b8731 upstream.

The LMMIO length reported by PAT and the length given by the LBA MASK
register are not consistent. This leads e.g. to a not-working ATI FireGL
card with the radeon DRM driver since the memory can't be mapped.

Fix this by correctly adjusting the resource sizes.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Ensure volatile space register %sr1 is not clobbered

commit e8d8fc219f9a0e63e7fb927881e6f4db8e7d34df upstream.

I still see the occasional random segv on rp3440.  Looking at one of
these (a code 15), it appeared the problem must be with the cache
handling of anonymous pages.  Reviewing this, I noticed that the space
register %sr1 might be being clobbered when we flush an anonymous page.

Register %sr1 is used for TLB purges in a couple of places.  These
purges are needed on PA8800 and PA8900 processors to ensure cache
consistency of flushed cache lines.

The solution here is simply to move the %sr1 load into the TLB lock
region needed to ensure that one purge executes at a time on SMP
systems.  This was already the case for one use.  After a few days of
operation, I haven't had a random segv on my rp3440.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slab: fix init_lock_keys

commit 0f8f8094d28eb53368ac09186ea6b3a324cc7d44 upstream.

Some architectures (e.g. powerpc built with CONFIG_PPC_256K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=11) get PAGE_SHIFT + MAX_ORDER > 26.

In 3.10 kernels, CONFIG_LOCKDEP=y with PAGE_SHIFT + MAX_ORDER > 26 makes
init_lock_keys() dereference beyond kmalloc_caches[26].
This leads to an unbootable system (kernel panic at initializing SLAB)
if one of kmalloc_caches[26...PAGE_SHIFT+MAX_ORDER-1] is not NULL.

Fix this by making sure that init_lock_keys() does not dereference beyond
kmalloc_caches[26] arrays.

Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-Love.SAKURA.ne.jp>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix gcc miscompilation in pa_memcpy()

commit 5b879d78bc0818aa710f5d4d9abbfc2aca075cc3 upstream.

When running the LTP testsuite one may hit this kernel BUG() with the
write06 testcase:

kernel BUG at mm/filemap.c:2023!
CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ #6
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88
 IIR: 03ffe01f    ISR: 0000000010340000  IOR: 000001fbe0380820
 CPU:        1   CR30: 00000000bef80000 CR31: ffffffffffffffff
 ORIG_R28: 00000000bdc192c0
 IAOQ[0]: iov_iter_advance+0x3c/0xc0
 IAOQ[1]: iov_iter_advance+0x40/0xc0
 RP(r2): generic_file_buffered_write+0x204/0x3f0
Backtrace:
 [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0
 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448
 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150
 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130
 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340
 [<00000000402505f8>] compat_writev+0x68/0xa0
 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8

Reason for this crash is a gcc miscompilation in the fault handlers of
pa_memcpy() which return the fault address instead of the copied bytes.
Since this seems to be a generic problem with gcc-4.7.x (and below), it's
better to simplify the fault handlers in pa_memcpy to avoid this problem.

Here is a simple reproducer for the problem:

int main(int argc, char **argv)
{
int fd, nbytes;
struct iovec wr_iovec[] = {
{ "TEST STRING                     ",32},
{ (char*)0x40005000,32} }; // random memory.
fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666);
nbytes = writev(fd, wr_iovec, 2);
printf("return value = %d, errno %d (%s)\n",
nbytes, errno, strerror(errno));
return 0;
}

In addition, John David Anglin wrote:
There is no gcc PR as pa_memcpy is not legitimate C code. There is an
implicit assumption that certain variables will contain correct values
when an exception occurs and the code randomly jumps to one of the
exception blocks.  There is no guarantee of this.  If a PR was filed, it
would likely be marked as invalid.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: document the shadow registers

commit a83f58bcb24003b9de2364de7c829a263423ead7 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fix RCU accesses to task->cgroups

commit 14611e51a57df10240817d8ada510842faf0ec51 upstream.

task->cgroups is a RCU pointer pointing to struct css_set.  A task
switches to a different css_set on cgroup migration but a css_set
doesn't change once created and its pointers to cgroup_subsys_states
aren't RCU protected.

task_subsys_state[_check]() is the macro to acquire css given a task
and subsys_id pair.  It RCU-dereferences task->cgroups->subsys[] not
task->cgroups, so the RCU pointer task->cgroups ends up being
dereferenced without read_barrier_depends() after it.  It's broken.

Fix it by introducing task_css_set[_check]() which does
RCU-dereference on task->cgroups.  task_subsys_state[_check]() is
reimplemented to directly dereference ->subsys[] of the css_set
returned from task_css_set[_check]().

This removes some of sparse RCU warnings in cgroup.

v2: Fixed unbalanced parenthsis and there's no need to use
    rcu_dereference_raw() when !CONFIG_PROVE_RCU.  Both spotted by Li.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fix umount vs cgroup_event_remove() race

commit 1c8158eeae0f37d0eee9f1fbe68080df6a408df2 upstream.

 commit 5db9a4d99b0157a513944e9a44d29c9cec2e91dc
 Author: Tejun Heo <tj@kernel.org>
 Date:   Sat Jul 7 16:08:18 2012 -0700

     cgroup: fix cgroup hierarchy umount race

This commit fixed a race caused by the dput() in css_dput_fn(), but
the dput() in cgroup_event_remove() can also lead to the same BUG().

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcmcia: at91_cf: fix gpio_get_value in at91_cf_get_status

commit e39506b466edcda2a7e9d0174d7987ae654137b7 upstream.

Commit 80af9e6d (pcmcia at91_cf: fix raw gpio number usage) forgot
to change the parameter in gpio_get_value after adding gpio
validation.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: hv: switch to use mb() instead of smp_mb()

commit 35848f68b07df3f917cb13fc3c134718669f569b upstream.

Even if guest were compiled without SMP support, it could not assume that host
wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for
UP guest.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: release mem region while removing module

commit 5388a3a5faba8dfa69e5f06c3a415d373c1a4316 upstream.

Do a release_mem_region of the hcd resource. Without this the
subsequent insertion of module fails in request_mem_region.

Signed-off-by: George Cherian <george.cherian@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: check for failed dma pool allocation

commit 025f880cb2e4d7218d0422d4b07bea1a68959c38 upstream.

Fail and free the container context in case dma_pool_alloc() can't allocate
the raw context data part of it

This patch should be backported to kernels as old as 2.6.31, that
contain the commit d115b04818e57bdbc7ccde4d0660b15e33013dc8 "USB: xhci:
Support for 64-byte contexts".

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: John Youn <johnyoun@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ehci-omap: Tweak PHY initialization sequence

commit 4e5c9e6fa2d232a0686d5fe45cd1508484048936 upstream.

For PHY mode, the PHYs must be brought out of reset
before the EHCI controller is started.

This patch fixes the issue where USB devices are not found
on Beagleboard/Beagle-xm if USB has been started previously
by the bootloader. (e.g. by "usb start" command in u-boot)

Tested on Beagleboard, Beagleboard-xm and Pandaboard.

Issue present on 3.10 onwards.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_mass_storage: add missing memory barrier for thread_wakeup_needed

commit d68c277b501889b3a50c179d1c3d704db7947b83 upstream.

Without this memory barrier, the file-storage thread may fail to
escape from the following while loop, because it may observe new
common->thread_wakeup_needed and old bh->state which are updated by
the callback functions.

/* Wait for the CBW to arrive */
while (bh->state != BUF_STATE_FULL) {
rc = sleep_thread(common);
if (rc)
return rc;
}

Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option,qcserial: move Novatel Gobi1K IDs to qcserial

commit a254810a86aaaac4ac6ba44fa934558b042a17a7 upstream.

These devices are all Gobi1K devices (according to the Windows INF
files) and should be handled by qcserial instead of option.  Their
network port is handled by qmi_wwan.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pch_uart: Add uart_clk selection for the MinnowBoard

commit 29692d05647cb7ecea56242241f77291d5624b95 upstream.

Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and
set the uart clock to 50MHz if so. This removes the need to pass the
user_uartclk to the kernel at boot time.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check error return from ext4_write_inline_data_end()

commit 42c832debbbf819f6c4ad8601baa559c44105ba4 upstream.

The function ext4_write_inline_data_end() can return an error.  So we
need to assign it to a signed integer variable to check for an error
return (since copied is an unsigned int).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()

commit 64cb927371cd2ec43758d8a094a003d27bc3d0dc upstream.

Both ext3 and ext4 htree_dirblock_to_tree() is just filling the
in-core rbtree for use by call_filldir().  All updates of ->f_pos are
done by the latter; bumping it here (on error) is obviously wrong - we
might very well have it nowhere near the block we'd found an error in.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix corruption when online resizing a fs with 1K block size

commit 6ca792edc13c409e8d4eb9001e048264c6a2eb64 upstream.

Subtracting the number of the first data block places the superblock
backups one block too early, corrupting the file system. When the block
size is larger than 1K, the first data block is 0, so the subtraction
has no effect and no corruption occurs.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: fix theoretical race in jbd2__journal_restart

commit 39c04153fda8c32e85b51c96eb5511a326ad7609 upstream.

Once we decrement transaction->t_updates, if this is the last handle
holding the transaction from closing, and once we release the
t_handle_lock spinlock, it's possible for the transaction to commit
and be released.  In practice with normal kernels, this probably won't
happen, since the commit happens in a separate kernel thread and it's
unlikely this could all happen within the space of a few CPU cycles.

On the other hand, with a real-time kernel, this could potentially
happen, so save the tid found in transaction->t_tid before we release
t_handle_lock.  It would require an insane configuration, such as one
where the jbd2 thread was set to a very high real-time priority,
perhaps because a high priority real-time thread is trying to read or
write to a file system.  But some people who use real-time kernels
have been known to do insane things, including controlling
laser-wielding industrial robots.  :-)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: move superblock checksum calculation to jbd2_write_superblock()

commit fe52d17cdd343ac43c85cf72940a58865b9d3bfb upstream.

Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock().  Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix duplicate if test

commit 10d0b9030a3f86e1e26c710c7580524d7787d688 upstream.

A typo causes routine rtl92cu_phy_rf6052_set_cck_txpower() to test the
same condition twice. The problem was found using cppcheck-1.49, and the
proper fix was verified against the pre-mac80211 version of the code.

This patch was originally included as commit 1288aa4, but was accidentally
reverted in a later patch.

Reported-by: David Binderman <dcb314@hotmail.com> [original report]
Reported-by: Andrea Morello <andrea.merello@gmail.com> [report of accidental reversion]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8723ae: Fix typo in firmware names

commit 73e088ed17c2880a963cc760a78af8a06d4a4d9d upstream.

The driver loads its firmware from files rtlwifi/rtl8723fw*.bin, but the
MODULE_FIRMWARE macros refer to rtlwifi/RTL8723aefw*.bin.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Axel Köllhofer <AxelKoellhofer@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200ND

commit c4d827c5ccc3a49227dbf9d4b248a2e86f388023 upstream.

This is a new device for this driver.

Reported-by: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Tobias Kluge <zielscheibe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix a deadlock when a file is reopened

commit 689c3db4d57a73bee6c5ad7797fce7b54d32a87c upstream.

If we request reading or writing on a file that needs to be
reopened, it causes the deadlock: we are already holding rw
semaphore for reading and then we try to acquire it for writing
in cifs_relock_file. Fix this by acquiring the semaphore for
reading in cifs_relock_file due to we don't make any changes in
locks and don't need a write access.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS use sensible file nlink values if unprovided

commit 6658b9f70ebca5fc0795b1d6d733996af1e2caa7 upstream.

Certain servers may not set the NumberOfLinks field in query file/path
info responses. In such a case, cifs_inode_needs_reval() assumes that
all regular files are hardlinks and triggers revalidation, leading to
excessive and unnecessary network traffic.

This change hardcodes cf_nlink (and subsequently i_nlink) when not
returned by the server, similar to what already occurs in cifs_mkdir().

Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.1

Revert "memcg: avoid dangling reference count in creation failure"

commit fa460c2d37870e0a6f94c70e8b76d05ca11b6db0 upstream.

This reverts commit e4715f01be697a.

mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops
an additional reference from all parents so the additional
mem_cgrroup_put(parent) potentially causes use-after-free.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Fix cpufreq regression after suspend/resume

commit f51e1eb63d9c28cec188337ee656a13be6980cfd upstream.

Toralf Förster reported that the cpufreq ondemand governor behaves erratically
(doesn't scale well) after a suspend/resume cycle. The problem was that the
cpufreq subsystem's idea of the cpu frequencies differed from the actual
frequencies set in the hardware after a suspend/resume cycle. Toralf bisected
the problem to commit a66b2e5 (cpufreq: Preserve sysfs files across
suspend/resume).

Among other (harmless) things, that commit skipped the call to
cpufreq_update_policy() in the resume path. But cpufreq_update_policy() plays
an important role during resume, because it is responsible for checking if
the BIOS changed the cpu frequencies behind our back and resynchronize the
cpufreq subsystem's knowledge of the cpu frequencies, and update them
accordingly.

So, restore the call to cpufreq_update_policy() in the resume path to fix
the cpufreq regression.

Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: sd: Fix parsing of 'temporary ' cache mode prefix

commit 2ee3e26c673e75c05ef8b914f54fadee3d7b9c88 upstream.

Commit 39c60a0948cc '[SCSI] sd: fix array cache flushing bug causing
performance problems' added temp as a pointer to "temporary " and used
sizeof(temp) - 1 as its length.  But sizeof(temp) is the size of the
pointer, not the size of the string constant.  Change temp to a static
array so that sizeof() does what was intended.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: mark unusable segment as nonpresent

commit 03617c188f41eeeb4223c919ee7e66e5a114f2c6 upstream.

Some userspaces do not preserve unusable property. Since usable
segment has to be present according to VMX spec we can use present
property to amend userspace bug by making unusable segment always
nonpresent. vmx_segment_access_rights() already marks nonpresent segment
as unusable.

Reported-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Tested-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix decoding of compounds across page boundaries

commit 247500820ebd02ad87525db5d9b199e5b66f6636 upstream.

A freebsd NFSv4.0 client was getting rare IO errors expanding a tarball.
A network trace showed the server returning BAD_XDR on the final getattr
of a getattr+write+getattr compound.  The final getattr started on a
page boundary.

I believe the Linux client ignores errors on the post-write getattr, and
that that's why we haven't seen this before.

Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1 end back channel session draining

commit 62f288a02f97bd9f6b2361a6fff709729fe9e110 upstream.

We need to ensure that we clear NFS4_SLOT_TBL_DRAINING on the back
channel when we're done recovering the session.

Regression introduced by commit 774d5f14e (NFSv4.1 Fix a pNFS session
draining deadlock)

Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: Changed order to start back-channel first. Minor code cleanup]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Reset itty for other pty

commit 64e377dcd7d75c241d614458e9619d3445de44ef upstream.

Commit 19ffd68f816878aed456d5e87697f43bd9e3bd2b
('pty: Remove redundant itty reset') introduced a regression
whereby the other pty's linkage is not cleared on teardown.
This triggers a false positive diagnostic in testing.

Properly reset the itty linkage.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Take hugepages into account when generating futex_key

commit 13d60f4b6ab5b702dc8d2ee20999f98a93728aec upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page->index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page->index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Tested-by: Ma Chenggong <ma.chenggong@zte.com.cn>
Reviewed-by: 'Mel Gorman' <mgorman@suse.de>
Acked-by: 'Darren Hart' <dvhart@linux.intel.com>
Cc: 'Peter Zijlstra' <peterz@infradead.org>
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: add stable_kernel_rules.txt to stable maintainer information

commit 7b175c46720f8e6b92801bb634c93d1016f80c62 upstream.

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.

Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sanitize argument for format string

commit 1c8fca1d92e14859159a82b8a380d220139b7344 upstream.

The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: do not pass disk names as format strings

commit ffc8b30866879ed9ba62bd0a86fecdbd51cd3d19 upstream.

Disk names may contain arbitrary strings, so they must not be
interpreted as format strings.  It seems that only md allows arbitrary
strings to be used for disk names, but this could allow for a local
memory corruption from uid 0 into ring 0.

CVE-2013-2851

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpfs: better test for errors

commit 3ebacb05044f82c5f0bb456a894eb9dc57d0ed90 upstream.

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.

Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

charger-manager: Ensure event is not used as format string

commit 3594f4c0d7bc51e3a7e6d73c44e368ae079e42f3 upstream.

The exposed interface for cm_notify_event() could result in the event msg
string being parsed as a format string. Make sure it is only used as a
literal string.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: do percpu allocation after uniqueness check. No, really!

commit 8d8022e8aba85192e937f1f0f7450e256d66ae5c upstream.

v3.8-rc1-5-g1fb9341 was supposed to stop parallel kvm loads exhausting
percpu memory on large machines:

    Now we have a new state MODULE_STATE_UNFORMED, we can insert the
    module into the list (and thus guarantee its uniqueness) before we
    allocate the per-cpu region.

In my defence, it didn't actually say the patch did this.  Just that
we "can".

This patch actually *does* it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Jim Hull <jim.hull@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/cdrom/cdrom.c: use kzalloc() for failing hardware

commit 542db01579fbb7ea7d1f7bb9ddcef1559df660b2 upstream.

In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory
area with kmalloc in line 2885.

  2885         cgc->buffer = kmalloc(blocksize, GFP_KERNEL);
  2886         if (cgc->buffer == NULL)
  2887                 return -ENOMEM;

In line 2908 we can find the copy_to_user function:

  2908         if (!ret && copy_to_user(arg, cgc->buffer, blocksize))

The cgc->buffer is never cleaned and initialized before this function.
If ret = 0 with the previous basic block, it's possible to display some
memory bytes in kernel space from userspace.

When we read a block from the disk it normally fills the ->buffer but if
the drive is malfunctioning there is a chance that it would only be
partially filled.  The result is an leak information to userspace.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jonathan Salwan <jonathan.salwan@gmail.com>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: fix invalid unsigned->signed conversion for timespec encoding

commit 8b8cf8917f9b5d74e04f281272d8719ce335a497 upstream.

__kernel_time_t is a long, which cannot hold a U32_MAX on 32-bit
architectures.  Just drop this check as it has limited value.

This fixes a crash like:

[  957.905812] kernel BUG at /srv/autobuild-ceph/gitbuilder.git/build/include/linux/ceph/decode.h:164!
[  957.914849] Internal error: Oops - BUG: 0 [#1] SMP ARM
[  957.919978] Modules linked in: rbd libceph libcrc32c ipmi_devintf ipmi_si ipmi_msghandler nfsd nfs_acl auth_rpcgss nfs fscache lockd sunrpc
[  957.932547] CPU: 1    Tainted: G        W     (3.9.0-ceph-19bb6a83-highbank #1)
[  957.939881] PC is at ceph_osdc_build_request+0x8c/0x4f8 [libceph]
[  957.945967] LR is at 0xec520904
[  957.949103] pc : [<bf13e76c>]    lr : [<ec520904>]    psr: 20000153
[  957.949103] sp : ec753df8  ip : 00000001  fp : ec53e100
[  957.960571] r10: ebef25c0  r9 : ec5fa400  r8 : ecbcc000
[  957.965788] r7 : 00000000  r6 : 00000000  r5 : ffffffff  r4 : 00000020
[  957.972307] r3 : 51cc8143  r2 : ec520900  r1 : ec753e58  r0 : ec520908
[  957.978827] Flags: nzCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment user
[  957.986039] Control: 10c5387d  Table: 2c59c04a  DAC: 00000015
[  957.991777] Process rbd (pid: 2138, stack limit = 0xec752238)
[  957.997514] Stack: (0xec753df8 to 0xec754000)
[  958.001864] 3de0:                                                       00000001 00000001
[  958.010032] 3e00: 00000001 bf139744 ecbcc000 ec55a0a0 00000024 00000000 ebef25c0 fffffffe
[  958.018204] 3e20: ffffffff 00000000 00000000 00000001 ec5fa400 ebef25c0 ec53e100 bf166b68
[  958.026377] 3e40: 00000000 0000220f fffffffe ffffffff ec753e58 bf13ff24 51cc8143 05b25ed2
[  958.034548] 3e60: 00000001 00000000 00000000 bf1688d4 00000001 00000000 00000000 00000000
[  958.042720] 3e80: 00000001 00000060 ec5fa400 ed53d200 ed439600 ed439300 00000001 00000060
[  958.050888] 3ea0: ec5fa400 ed53d200 00000000 bf16a320 00000000 ec53e100 00000040 ec753eb8
[  958.059059] 3ec0: ec51df00 ed53d7c0 ed53d200 ed53d7c0 00000000 ed53d7c0 ec5fa400 bf16ed70
[  958.067230] 3ee0: 00000000 00000060 00000002 ed53d200 00000000 bf16acf4 ed53d7c0 ec752000
[  958.075402] 3f00: ed980e50 e954f5d8 00000000 00000060 ed53d240 ed53d258 ec753f80 c04f44a8
[  958.083574] 3f20: edb7910c ec664700 01ade920 c02e4c44 00000060 c016b3dc ec51de40 01adfb84
[  958.091745] 3f40: 00000060 ec752000 ec753f80 ec752000 00000060 c0108444 00000007 ec51de48
[  958.099914] 3f60: ed0eb8c0 00000000 00000000 ec51de40 01adfb84 00000001 00000060 c0108858
[  958.108085] 3f80: 00000000 00000000 51cc8143 00000060 01adfb84 00000007 00000004 c000dd68
[  958.116257] 3fa0: 00000000 c000dbc0 00000060 01adfb84 00000007 01adfb84 00000060 01adfb80
[  958.124429] 3fc0: 00000060 01adfb84 00000007 00000004 beded1a8 00000000 01adf2f0 01ade920
[  958.132599] 3fe0: 00000000 beded180 b6811324 b6811334 800f0010 00000007 2e7f5821 2e7f5c21
[  958.140815] [<bf13e76c>] (ceph_osdc_build_request+0x8c/0x4f8 [libceph]) from [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd])
[  958.152739] [<bf166b68>] (rbd_osd_req_format_write+0x50/0x7c [rbd]) from [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd])
[  958.164486] [<bf1688d4>] (rbd_dev_header_watch_sync+0xe0/0x204 [rbd]) from [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd])
[  958.175967] [<bf16a320>] (rbd_dev_image_probe+0x23c/0x850 [rbd]) from [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd])
[  958.185975] [<bf16acf4>] (rbd_add+0x3c0/0x918 [rbd]) from [<c02e4c44>] (bus_attr_store+0x20/0x2c)
[  958.194850] [<c02e4c44>] (bus_attr_store+0x20/0x2c) from [<c016b3dc>] (sysfs_write_file+0x168/0x198)
[  958.203984] [<c016b3dc>] (sysfs_write_file+0x168/0x198) from [<c0108444>] (vfs_write+0x9c/0x170)
[  958.212768] [<c0108444>] (vfs_write+0x9c/0x170) from [<c0108858>] (sys_write+0x3c/0x70)
[  958.220768] [<c0108858>] (sys_write+0x3c/0x70) from [<c000dbc0>] (ret_fast_syscall+0x0/0x30)
[  958.229199] Code: e59d1058 e5913000 e3530000 ba000114 (e7f001f2)

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix sleeping function called from invalid context.

commit a1dc1937337a93e699eaa56968b7de6e1a9e77cf upstream.

[ 1121.231883] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1121.231935] in_atomic(): 1, irqs_disabled(): 0, pid: 9831, name: mv
[ 1121.231971] 1 lock held by mv/9831:
[ 1121.231973]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...},at:[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]
[ 1121.231998] CPU: 3 PID: 9831 Comm: mv Not tainted 3.10.0-rc6+ #215
[ 1121.232000] Hardware name: To Be Filled By O.E.M. To Be Filled By
O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[ 1121.232027]  ffff88006d355a80 ffff880092f69ce0 ffffffff8168348c ffff880092f69cf8
[ 1121.232045]  ffffffff81070435 ffff88006d355a20 ffff880092f69d20 ffffffff816899ba
[ 1121.232052]  0000000300000004 ffff8800b76911d0 ffff88006d355a20 ffff880092f69d68
[ 1121.232056] Call Trace:
[ 1121.232062]  [<ffffffff8168348c>] dump_stack+0x19/0x1b
[ 1121.232067]  [<ffffffff81070435>] __might_sleep+0xe5/0x110
[ 1121.232071]  [<ffffffff816899ba>] down_read+0x2a/0x98
[ 1121.232080]  [<ffffffffa02baf70>] ceph_vxattrcb_layout+0x60/0xf0 [ceph]
[ 1121.232088]  [<ffffffffa02bbd7f>] ceph_getxattr+0x9f/0x1d0 [ceph]
[ 1121.232093]  [<ffffffff81188d28>] vfs_getxattr+0xa8/0xd0
[ 1121.232097]  [<ffffffff8118900b>] getxattr+0xab/0x1c0
[ 1121.232100]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232104]  [<ffffffff81155f80>] ? kmem_cache_free+0xb0/0x260
[ 1121.232107]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232110]  [<ffffffff8109e63d>] ? trace_hardirqs_on+0xd/0x10
[ 1121.232114]  [<ffffffff816957a7>] ? sysret_check+0x1b/0x56
[ 1121.232120]  [<ffffffff81189c9c>] SyS_fgetxattr+0x6c/0xc0
[ 1121.232125]  [<ffffffff81695782>] system_call_fastpath+0x16/0x1b
[ 1121.232129] BUG: scheduling while atomic: mv/9831/0x10000002
[ 1121.232154] 1 lock held by mv/9831:
[ 1121.232156]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...}, at:
[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]

I think move the ci->i_ceph_lock down is safe because we can't free
ceph_inode_info at there.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: Fix NULL pointer dereference in auth client code

commit 2cb33cac622afde897aa02d3dcd9fbba8bae839e upstream.

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

Pull another powerpc fix from Benjamin Herrenschmidt:
 "I mentioned that while we had fixed the kernel crashes, EEH error
  recovery didn't always recover...  It appears that I had a fix for
  that already in powerpc-next (with a stable CC).

  I cherry-picked it today and did a few tests and it seems that things
  now work quite well.  The patch is also pretty simple, so I see no
  reason to wait before merging it."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix fetching bus for single-dev-PE

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of seven bug fixes.  Several fcoe fixes for locking
  problems, initiator issues and a VLAN API change, all of which could
  eventually lead to data corruption, one fix for a qla2xxx locking
  problem which could lead to multiple completions of the same request
  (and subsequent data corruption) and a use after free in the ipr
  driver.  Plus one minor MAINTAINERS file update"

(only six bugfixes in this pull, since I had already pulled the fcoe API
fix directly from Robert Love)

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] ipr: Avoid target_destroy accessing memory after it was freed
  [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
  MAINTAINERS: Fix fcoe mailing list
  libfc: extend ex_lock to protect all of fc_seq_send
  libfc: Correct check for initiator role
  libfcoe: Fix Conflicting FCFs issue in the fabric

powerpc/eeh: Fix fetching bus for single-dev-PE

While running Linux as guest on top of phyp, we possiblly have
PE that includes single PCI device. However, we didn't return
its PCI bus correctly and it leads to failure on recovery from
EEH errors for single-dev-PE. The patch fixes the issue.

Cc: <stable@vger.kernel.org> # v3.7+
Cc: Steve Best <sbest@us.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
 "We discovered some breakage in our "EEH" (PCI Error Handling) code
  while doing error injection, due to a couple of regressions.  One of
  them is due to a patch (37f02195bee9 "powerpc/pci: fix PCI-e devices
  rescan issue on powerpc platform") that, in hindsight, I shouldn't
  have merged considering that it caused more problems than it solved.

  Please pull those two fixes.  One for a simple EEH address cache
  initialization issue.  The other one is a patch from Guenter that I
  had originally planned to put in 3.11 but which happens to also fix
  that other regression (a kernel oops during EEH error handling and
  possibly hotplug).

  With those two, the couple of test machines I've hammered with error
  injection are remaining up now.  EEH appears to still fail to recover
  on some devices, so there is another problem that Gavin is looking
  into but at least it's no longer crashing the kernel."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Improve device hotplug initialization
  powerpc/eeh: Add eeh_dev to the cache during boot

ARM: dt: Only print warning, not WARN() on bad cpu map in device tree

Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.

Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.

Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/pci: Improve device hotplug initialization

Commit 37f02195b (powerpc/pci: fix PCI-e devices rescan issue on powerpc
platform) fixes a problem with interrupt and DMA initialization on hot
plugged devices. With this commit, interrupt and DMA initialization for
hot plugged devices is handled in the pci device enable function.

This approach has a couple of drawbacks. First, it creates two code paths
for device initialization, one for hot plugged devices and another for devices
known during the initial PCI scan. Second, the initialization code for hot
plugged devices is only called when the device is enabled, ie typically
in the probe function. Also, the platform specific setup code is called each
time pci_enable_device() is called, not only once during device discovery,
meaning it is actually called multiple times, once for devices discovered
during the initial scan and again each time a driver is re-loaded.

The visible result is that interrupt pins are only assigned to hot plugged
devices when the device driver is loaded. Effectively this changes the PCI
probe API, since pci_dev->irq and the device's dma configuration will now
only be valid after pci_enable() was called at least once. A more subtle
change is that platform specific PCI device setup is moved from device
discovery into the driver's probe function, more specifically into the
pci_enable_device() call.

To fix the inconsistencies, add new function pcibios_add_device.
Call pcibios_setup_device from pcibios_setup_bus_devices if device setup
is not complete, and from pcibios_add_device if bus setup is complete.

With this change, device setup code is moved back into device initialization,
and called exactly once for both static and hot plugged devices.

[ This also fixes a regression introduced by the above patch which
  causes dev->irq to be overwritten under some cirumstances after
  MSIs have been enabled for the device which leads to crashes due
  to the MSI core "hijacking" dev->irq to store the base MSI number
  and not the LSI. --BenH
]

Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "This fixes a crash in the crypto layer exposed by an SCTP test tool"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algboss - Hold ref count on larval

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm/qxl fix from Dave Airlie:
 "Bad me forgot an access check, possible security issue, but since this
  is the first kernel with it, should be fine to just put it in now"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/qxl: add missing access check for execbuffer ioctl

Fix: kernel/ptrace.c: ptrace_peek_siginfo() missing __put_user() validation

This __put_user() could be used by unprivileged processes to write into
kernel memory.  The issue here is that even if copy_siginfo_to_user()
fails, the error code is not checked before __put_user() is executed.

Luckily, ptrace_peek_siginfo() has been added within the 3.10-rc cycle,
so it has not hit a stable release yet.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull Ceph fix from Sage Weil:
 "This is a recently spotted regression in the snapshot behavior...

  It turns out several tests weren't being run in the nightlies so this
  took a while to spot"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: send snapshot context with writes