mxc: add arch_reset() function

This patch adds arch_reset() function for all mxc platforms.

It also removes (unsused) arch/arm/mach-mx2/system.c file.

This patch has been tested on i.MX1/27/31/35

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clkdev: add possibility to get a clock based on the device name

This adds clk_get_sys to get a clock without the associated struct
device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX1: remove fb support from mach-imx

The lack of an include file currently breaks compilation of
mx1ads_defconfig. As framebuffer support is not actively used for
mach-imx and the whole architecture will be replaced by mach-mx1
soon, just remove fb support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline into devel

Conflicts:
arch/arm/mm/Kconfig

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'next-s3c64xx-regs' of git://aeryn.fluff.org.uk/bjdooks/linux into devel

Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into devel

Gemini: Add support for Teltonika RUT100

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

Gemini: gpiolib based GPIO support v2

v2:
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

MAINTAINERS: add myself as Gemini architecture maintainer

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

ARM: Add Gemini architecture v3

Adds support for Cortina Systems Gemini family CPUs:
http://www.cortina-systems.com/products/category/18

v3:
- fixed __io(a) to be defined as __typesafe_io(a)

v2:
- #include <asm/io.h> -> <linux/io.h>
- remove asm/system.h include
- revorked mm.c to use named initializers
- removed "empty" dma.h
- updated copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

[ARM] OMAP: Fix compile for omap2_init_common_hw()

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'for-next' of git://git./linux/kernel/git/tmlind/linux-omap-2.6 into devel

MAINTAINERS: Add myself as Faraday ARM core variant maintainer

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

ARM: Add support for FA526 v2

Adds support for Faraday FA526 core. This core is used at least by:
Cortina Systems Gemini and Centroid family
Cavium Networks ECONA family
Grain Media GM8120
Pixelplus ImageARM
Prolific PL-1029
Faraday IP evaluation boards

v2:
- move TLB_BTB to separate patch
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] collie: fix two minor formatting nits

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5431/1: scoop: completely drop old-style SCOOP GPIO accessors

Now, as all places that use Scoop GPIO have been converted to use
GPIO API, drop old-style accessors completely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5430/1: collie_pm: use new GPIO API to control charger

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 5429/1: collie: start scoop converton to new api

Start converting scoop gpio access to new API instead of old
deprecated one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge git://git.marvell.com/orion into devel

ARM: tlbflush.h: introduce TLB_BTB flag

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>

Merge branch 'highmem' into devel

Merge branch 'devel' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

[ARM] Kirkwood: fail the probe if internal RTC does not work

Having a RTC that doesn't maintain proper time across a reboot is one
thing.  But a RTC that doesn't work at all and only causes timeouts is
another.

Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

ARM OMAP3: Initial support for Nokia RX-51, v3

Adds board files and related headers for Nokia RX-51
Internet Tablet.

This patch has been updated with some clean-up patches
posted earlier to linux-omap list.

Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Add support for 3430 SDP, v4

Add support for 3430 SDP.

Various updates have been merged into this patch from
the linux-omap list.

Patch updated to initialize regulators by David Brownell
<dbrownell@users.sourceforge.net>.

Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v3

An upcoming Overo expansion board includes an ADS7846 touchscreen controller.

This patch adds support via the ads7846 driver when enabled in the
kernel config.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: MUSB initialization for omap hw, v2

Create a generic board-file for initializing usb
on omap2430 and omap3 boards.

Patch modified by Tony to build the module based on
CONFIG_USB_MUSB_SOC. Also merged in a patch adding
the nop xceiv from Ajay Kumar Gupta <ajay.gupta@ti.com>.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Add base address definitions and resources for OMAP 3 IS, v2

This replaces earlier patch from Sergio Aguirre titled "[REVIEW PATCH 03/14]
OMAP34XX: CAM: Resources fixes".

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 allow arbitrary slot names, v3

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 add cover switch

Allow a cover switch to be used to cause a rescan of the
MMC slot.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 fix for vmmc = 0

Resolve longstanding issue noted by Adrian Hunter:  confusion
between settting VSEL=0 (which is 1.8V on MMC1) and poweroff.

Also, leave VSEL alone if we're just powering the regulator off.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 add MMC3 support, v2

Device connected to MMC3 is assumed to be self-powered, so
set_power() function is empty. It can't be omited because
host driver requires it.

Array size for hsmmc[] is specified to allocate to allocate
an instance for the third MMC controller.

Also fix a leak which happens if invalid controller id
is passed.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 init passes device nodes back, v2

When setting up HSMMC devices, pass the device nodes back so
board code can linking them to their power supply regulators.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 voltage cleanup

Correct twl4030 MMC power switching:  fix voltage ranges reported
for each slot, and handle them fully.

 Lies corrected:
  - MMC-1 doesn't support the 2.6-2.7 Volt range
  - MMC-2 can't normally support anything except 1.8V
 Omissions corrected
  - MMC-1 *does* handle the 2.8-2.9 Volt range
  - MMC-2 can handle 2.5-3.2 Volt cards, given a transceiver

Add transciever support for MMC-2; enable it for Overo and Pandora.
(Depends on something else to have set up pinmuxing for control
signals instead of as MMC2_DAT4..7 pins.)

Also shrink twl4030_hsmmc_info a smidgeon ... padding is all gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: mmc-twl4030 fix name buffer length, v2

Add 1 to buffer length for null terminator and use snprintf.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Add more GPIO mux options

This patch adds several new GPIO pins and updates
the pin naming comments.

The patch is based on earlier patches on linux-omap
list by Manikandan Pillai <mani.pillai@ti.com>,
Vaibhav Hiremath <hvaibhav@ti.com> and
David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP3: Remove unused CONFIG_I2C2_OMAP_BEAGLE

There is no CONFIG_I2C2_OMAP_BEAGLE in mainline and it is under
removal in linux-omap also so remove this dead code now.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: get rid of OMAP_TAG_USB, v2

OMAP_TAGS should vanish soon since they're not generic arm tags.
Most of them can be converted to a platform_data or parsed
from a command line like e.g. serial tag.

For OMAP_TAG_USB we just let boards call omap_usb_init()
passing a pointer to omap_usb_config.

Patch updated by Tony for mainline, basically make
n770 and h4 compile. Also folded in a fix for OSK
by David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Dispatch only relevant DMA interrupts

This fixes the spurious interrupt issue on a DMA channel.

In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the
SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of
the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers.
Since there are four sDMA interrupt lines and if more than one
line is actively used by two concurrently running sDMA softwares
modules,then the spurious interrupt can be observed on the other
lines.

Fix in this patch will only dispatch the relevant and enabled
interrupts on a particular line thus perevting spurious IRQ.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Get available DMA channels from cmdline

This patch set up a cmdline option for omap dma for masking the
available channels. It is needed since the OMAP DMA is a system wide
resource and can be used by another software apart from the kernel.

To reserve the omap SDMA channels for kernel dma usage, use cmdline
bootarg "omap_dma_reserve_ch=". The valid range is 1 to 32.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add method to register additional I2C busses on the command line, v2

This patch extends command line option "i2c_bus=bus_id,clkrate" so that
it allow to register additional I2C busses that are not registered with
omap_register_i2c_bus from board initialization code.

Purpose of this is to register additional board busses which are routed
to external connectors only without any on board I2C devices.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add command line option for I2C bus speed, v2

This patch adds a new command line option "i2c_bus=bus_id,clkrate" into
I2C bus registration helper. Purpose of the option is to override the
default board specific bus speed which is supplied by the
omap_register_i2c_bus.

The default bus speed is typically set to speed of slowest I2C chip on the
bus and overriding allow to use some experimental configurations or updated
chip versions without any kernel modifications.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Add documentation for function omap_register_i2c_bus

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Export dmtimer functions

Make the dmtimer function symbols available so modules can take use of
them.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

[OMAP850] Build system changes

Build system changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

[OMAP850] IRQ related changes

IRQ related changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

[OMAP850] Changes to memory subsystem

Changes to memory subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

[OMAP850] Changes to base IO subsystem, v2

Changes to base IO subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

[OMAP850] Add base support for omap850 cpu

Add base support for omap850 cpu.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: Remove remaining board-*.h includes from hardware.h

Also remove board-omap3beagle.h that is not included anywhere,
and move protoype for voiceblue_reset() from board-voiceblue.h
to system.h.

After this patch there are still board-ams-delta.h, board-sx1.h
and board-voiceblue.h that export some functions. These could
be removed if the functions were moved under drivers.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-nokia.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-overo.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-ldp.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP34XX_ETHR_START to LDP_ETHR_START.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-h4.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-apollon.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-omap2430sdp.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-palm*.h from hardware.h

Move the defines to the associated board file and remove
the now unnecessary header files.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-osk.h from hardware.h

Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-innovator.h from hardware.h

Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-h3.h from hardware.h

Also move board-h3.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-h2.h from hardware.h

Also move board-h2.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: No need to include board-perseus2.h or board-fsample.h from hardware.h

Move defines to the board file and remove the now
unnecessary headers.

Signed-off-by: Tony Lindgren <tony@atomide.com>

omap mailbox: remove unnecessary header file inclusion

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: convert sequence bit checking to module paramter

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: move mailbox.h into mailbox.c

no need to keep mailbox.h separately.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: add save_/restore_ctx() for PM

To preserve the registers during off-mode

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: fix empty struct device for omap2

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: fix empty struct device for omap1

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: fix empty struct device for omap_mbox

Since "mbox->dev" doesn't exist and isn't created either at
registration, this patch will create "struct device", which belongs to
"omap-mailbox" class and set this pointer for the member of
"struct omap_mbox".

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: print hardware revision at startup

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: add initial omap3 support

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

omap mailbox: cleanup omap2 register definition with macro

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>

Linux 2.6.29

Build with -fno-dwarf2-cfi-asm

With a sufficiently new compiler and binutils, code which wasn't
previously generating .eh_frame sections has begun to.  Certain
architectures (powerpc, in this case) may generate unexpected relocation
formats in response to this, preventing modules from loading.

While the new relocation types should probably be handled, revert to the
previous behaviour with regards to generation of .eh_frame sections.

(This was reported against Fedora, which appears to be the only distro
doing any building against gcc-4.4 at present: RH bz#486545.)

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Alexandre Oliva <aoliva@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

trivial: fix orphan dates in ext2 documentation

Revert the change to the orphan dates of Windows 95, DOS, compression.
Add a new orphan date for OS/2.

Signed-off-by: Jody McIntyre <scjody@sun.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ARM] orion5x: update of FPGA ID's for the TS-78xx

Received official word finally from Technological Systems on which
FPGA ID's they have released unto the world.  Also an additional of
a dummy entry matching the FPGA ID of the Verilog template on our
wiki.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

[ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS

Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

[ARM] update mach-types

Signed-off-by: Nicolas Pitre <nico@marvell.com>

[ARM] Kirkwood: More consistency regarding MPP naming

With the exception of UART0, all MPP names are uppercase.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

[ARM] Kirkwood: Hook up I2C

Hook up I2C on Marvell Kirkwood.  Tested on a QNAP TS-219 which has
RTC connected through I2C.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  ucc_geth: Fix oops when using fixed-link support
  dm9000: locking bugfix
  net: update dnet.c for bus_id removal
  dnet: DNET should depend on HAS_IOMEM
  dca: add missing copyright/license headers
  nl80211: Check that function pointer != NULL before using it
  sungem: missing net_device_ops
  be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle
  be2net: replenish when posting to rx-queue is starved in out of mem conditions
  bas_gigaset: correctly allocate USB interrupt transfer buffer
  smsc911x: reset last known duplex and carrier on open
  sh_eth: Fix mistake of the address of SH7763
  sh_eth: Change handling of IRQ
  netns: oops in ip[6]_frag_reasm incrementing stats
  net: kfree(napi->skb) => kfree_skb
  net: fix sctp breakage
  ipv6: fix display of local and remote sit endpoints
  net: Document /proc/sys/net/core/netdev_budget
  tulip: fix crash on iface up with shirq debug
  virtio_net: Make virtio_net support carrier detection
  ...

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix crash with /proc/iomem
  sparc64: Reschedule KGDB capture to a software interrupt.
  sbus: Auto-load openprom module when device opened.

fix ptrace slowness

This patch fixes bug #12208:

  Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12208
  Subject         : uml is very slow on 2.6.28 host

This turned out to be not a scheduler regression, but an already
existing problem in ptrace being triggered by subtle scheduler
changes.

The problem is this:

 - task A is ptracing task B
 - task B stops on a trace event
 - task A is woken up and preempts task B
 - task A calls ptrace on task B, which does ptrace_check_attach()
 - this calls wait_task_inactive(), which sees that task B is still on the runq
 - task A goes to sleep for a jiffy
 - ...

Since UML does lots of the above sequences, those jiffies quickly add
up to make it slow as hell.

This patch solves this by not rescheduling in read_unlock() after
ptrace_stop() has woken up the tracer.

Thanks to Oleg Nesterov and Ingo Molnar for the feedback.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'merge' of git://git./linux/kernel/git/galak/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines

powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines

Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic
ppc32 SW" (commit a4bd6a93c3f14691c8a29e53eb04dc734b27f0db)

It was missing the code to actually deal with the fixup of
_PAGE_COHERENT based on the CPU feature.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

ucc_geth: Fix oops when using fixed-link support

commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change
uec phy id to the same format as gianfar's") introduced a regression
in the ucc_geth driver that causes this oops when fixed-link is used:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0151270
Oops: Kernel access of bad area, sig: 11 [#1]
TMCUTU
NIP: c0151270 LR: c0151270 CTR: c0017760
REGS: cf81fa60 TRAP: 0300   Not tainted  (2.6.29-rc8)
MSR: 00009032 <EE,ME,IR,DR>  CR: 24024042  XER: 20000000
DAR: 00000000, DSISR: 20000000
TASK = cf81cba0[1] 'swapper' THREAD: cf81e000
GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80
cf86b08c
GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000
0ffc81a0
GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c
cf83f000
GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80
cf83f360
NIP [c0151270] ucc_geth_open+0x330/0x1efc
LR [c0151270] ucc_geth_open+0x330/0x1efc
Call Trace:
[cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable)
[cf81fba0] [c0187638] dev_open+0xbc/0x12c
[cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0

This patch fixes the issue by removing offending (and somewhat
duplicate) code from init_phy() routine, and changes _probe()
function to use uec_mdio_bus_name().

Also, since we fully construct phy_bus_id in the _probe() routine,
we no longer need ->phy_address and ->mdio_bus fields in
ucc_geth_info structure.

I wish the patch would be a bit shorter, but it seems like the only
way to fix the issue in a sane way. Luckily, the patch has been
tested with real PHYs and fixed-link, so no further regressions
expected.

Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

dm9000: locking bugfix

This fixes a locking bug in the dm9000 driver.  It calls
request_irq() without setting IRQF_DISABLED ... which is
correct for handlers that support IRQ sharing, since that
behavior is not guaranteed for shared IRQs.  However, its
IRQ handler then wrongly assumes that IRQs are blocked.
So the fix just uses the right spinlock primitives in the
IRQ handler.

NOTE:  this is a classic example of the type of bug which
lockdep currently masks by forcibly setting IRQF_DISABLED
on IRQ handlers that did not request that flag.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: update dnet.c for bus_id removal

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: update pxa910 maintainers

Signed-off-by: Eric Miao <eric.miao@marvell.com>

MAINTAINERS: update pxa168 maintainers

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Jason Chagas <jason.chagas@marvell.com>

[ARM] pxa: add defconfig for pxa910-based platforms

Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add defconfig for pxa168-based platforms

Instead of having various pieces of defconfig files for different
platforms, let's group them into a single one.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for pxa910-based TTC_DKB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for pxa910-based TavorEVB

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add base support for Marvell PXA910

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa/aspenite: add support for debug ethernet

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa/aspenite: add support for console uart

Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: allow reuse of serial driver for pxa168

Signed-off-by: Eric Miao <eric.miao@marvell.com>

[ARM] pxa: add MFP support for pxa168

Signed-off-by: Eric Miao <eric.miao@marvell.com>