Colin Cross [Wed, 18 Aug 2010 07:19:12 +0000 (00:19 -0700)]
[ARM] tegra: dma: Fix critical data corruption bugs
Sometimes, due to high interrupt latency in the continuous mode
of DMA transfer, the half buffer complete interrupt is handled
after DMA has transferred the full buffer. When this is detected,
stop DMA immediately and restart with the next buffer if the next
buffer is ready.
originally fixed by Victor(Weiguo) Pan <wpan@nvidia.com>
In place of using the simple spin_lock()/spi_unlock() in the
interrupt thread, using the spin_lock_irqsave() and
spin_unlock_irqrestore(). The lock is shared between the normal
process context and interrupt context.
originally fixed by Laxman Dewangan (ldewangan@nvidia.com)
The use of shadow registers caused memory corruption at physical
address 0 because the enable bit was not shadowed, and assuming it
needed to be set would enable an unconfigured dma block. Most of the
register accesses don't need to know the previous state of the
registers, and the few places that do need to modify only a few bits
in the registers are the same ones that were sometimes incorrectly
setting the enable bit. This patch convert tegra_dma_update_hardware
to set the entire register, and the other users to read-modify-write,
and drops the shadow registers completely.
Also fixes missing locking in tegra_dma_allocate_channel
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 24 Aug 2010 01:37:25 +0000 (18:37 -0700)]
[ARM] tegra: Allow overriding arch_reset
Change-Id: Iba7ab5af149724dae8caab76f044e5b12d6b0436
Signed-off-by: Colin Cross <ccross@google.com>
Colin Cross [Fri, 6 Aug 2010 00:40:39 +0000 (17:40 -0700)]
[ARM] tegra: cpufreq: Disable cpufreq during suspend
Adds a SUSPEND_PREPARE notification hook to drop the frequency to
the lowest possible during suspend. This prevents the cpufreq driver
from attempting regulator calls after suspend has started - the
regulator api can call into drivers that have already been suspended.
Also adds 216MHz (off of PLLP) as the lowest CPU frequency, which
allows PLLX to be turned off.
Change-Id: I46a7f88610ce35b6f761a557905861f79bc4df0b
Signed-off-by: Colin Cross <ccross@google.com>
Gary King [Tue, 3 Aug 2010 21:53:05 +0000 (14:53 -0700)]
[ARM] tegra: iomap: Add missing devices, fix use of SZ_8
Adds gart, hdmi, and pwm controllers to mach/iomap.h
SZ_* stops at SZ_16; just use a constant value of 8 for the timer
aperture sizes.
Change-Id: I4bbf1ca37b65698f707a277575054610ee6ca445
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Fri, 16 Apr 2010 21:58:24 +0000 (14:58 -0700)]
[ARM] tegra: add CPU_IDLE driver
supports clock-gated (LP3) SMP idle mode, and power-gated (LP2) idle
mode when all slave processors are off-line
latency for LP2 idle state is calculated as a 2-sample weighted moving
average, to allow for future variations due to (e.g.) CPU frequency
scaling.
when LP2 is an allowed state (i.e., slave CPUs have been taken off-line),
LP3 will perform an hrtimer peek-ahead; this avoids waiting for the
first processor tick following an LP2 in order to run expired hrtimers
(which was causing a 1 tick delay for most user-space sleeps)
LP2 wakeup time and latency uses a 2ms hard-coded offset to account for
the CPU powergood timeout; this is reasonable for Harmony but should be
un-hardcoded for other platforms.
Change-Id: I75e36dc14341200ba85da7ef2db8a59cc487ecec
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 18 Aug 2010 07:19:27 +0000 (00:19 -0700)]
[ARM] tegra: gpio: Add support for waking from suspend
Change-Id: If692ff0e7de3d3d5a825a8b1e7989650ef9fb238
Signed-off-by: Colin Cross <ccross@google.com>
Colin Cross [Mon, 4 Oct 2010 07:25:16 +0000 (00:25 -0700)]
[ARM] tegra: irq: Add set_wake and set_type support for suspend
Change-Id: Ic18e0c92462a590b759752662bd7d67aaf8a371a
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Fri, 16 Apr 2010 21:36:45 +0000 (14:36 -0700)]
[ARM] tegra: Add suspend and hotplug support
LP2 idle mode power-gates the main CPU complex, requiring a
full processor state save and restore from a reset vector
processor context area is allocated during platform initialization
from the kernel, and mapped into the hotplug page tables (which also
serve as the initial page tables for the LP2 main processor reset)
restoring the processor from LP2 requires calculation of a system-
and APB-clock-dependent CPU power good timer value. on Harmony,
2ms is a good baseline value for this, and the APB clock is running at
13.5MHz. these values need to be un-hardcoded for other platforms.
platform-specific data (power good times, PMU capabilities, etc.) must be
specified when registering the suspend operations to ensure that platform
power sequencing restrictions are maintained
since all device interrupts (except timers) are disabled in the suspend
path, the wakeup interrupts need to be manually unmasked before entering
into a suspend state or the processor will never wake up; these forced-unmask
interrupts are re-masked immediately in the resume path to prevent the
kernel from live-locking prior to driver resume.
in both LP0 and LP1, SDRAM is placed into self-refresh. in order to safely
perform this transition, the final shutdown procedure responsible for
* turning off the MMU and L1 data cache
* putting memory into self-refresh
* setting the DDR pads to the lowest power state
* and turning off PLLs
is copied into IRAM (at the address TEGRA_IRAM_BASE + SZ_4K) at the
start of the suspend process.
in LP1 mode (like LP2), the CPU is reset and executes the code specified
at the EVP reset vector. since SDRAM is in self-refresh, this code must
also be located in IRAM, and it must re-enable DRAM before restoring the
full context. in this implementation, it enables the CPU on PLLP, enables
PLLC and PLLM, restores the SCLK burst policy, and jumps to the LP2 reset
vector to restore the rest of the system (MMU, PLLX, coresite, etc.). the
LP2 reset vector is expected to be found in PMC_SCRATCH1, and is
initialized during system-bootup
in LP0 mode, the core voltage domain is also shutoff. as a result, all
of the volatile state in the core voltage domain (e.g., pinmux registers,
clock registers, etc.) must be saved to memory so that it can be restored
after the system resumes. a limited set of wakeups are available from LP0,
and the correct levels for the wakeups must be programmed into the PMC
wakepad configuration register prior to system shutdown. on resume, the
system resets into the boot ROM, and the boot ROM restores SDRAM and other
system state using values saved during kernel initialization in the PMC
scratch registers.
resuming from LP0 requires the boot ROM to supply a signed recovery codeblob
to the kernel; the kernel expects that the length and address of this blob
is supplied with the lp0_vec= command line argument; if not present, suspend-
to-LP0 will be disabled
for simplicity, the outer cache is shutdown for both LP0 and LP1; it
is possible to optimize the LP1 routine to bypass outer cache shutdown
and restart
to save power, SMP tegra SoCs place non-boot CPUs in reset when they
are removed from the scheduling cluster using CPU hotplug.
slave CPUs save their contexts (incl. CP15 and VFP state) out to a
reserved memory region, cancel SMP operation, and write to the SoC
reset controller to disable themselves. this is done with caches and
MMU enabled, so care is taken to ensure that all the dirty context cache
lines are cleaned out to the PoC before shutting down.
when re-enabled, slave CPUs execute a hotplug boot routine which mirrors
the initial configuration performed by secondary_startup, but after
enabling the MMU "return" to __cortex_a9_restore which restores the
saved state from the context area, and returns to platform_cpu_die.
a local page directory is maintained (initially a copy of init_mm) by
the tegra hotplug code, to ensure that all necessary context data and
text is properly mapped (including 1:1 virtual->physical mappings for
the code which re-enables the MMU); this page table will also be used
for the idle and suspend save and resume routines for the master CPU.
in pseudo-code, the hotplug startup routine is basically:
* invalidate i-cache, BTAC, TLB, exclusive monitor
* enable i-cache, branch prediction
* invalidate d-cache
* invalidate SCU tags
* enable SMP
* setup page tables to tegra_pgd
* enable MMU & d-cache
* restore CP15 from context area
* change page table pointer to context from shutdown
* restore stack registers
* return to platform_cpu_die
Includes fixes from:
Scott Williams <scwilliams@nvidia.com>
Aleksandr Frid <afrid@nvidia.com>
Vik Kasivajhula <tkasivajhula@nvidia.com>
Bharat Nihalani (bnihalani@nvidia.com)
Change-Id: I50e6a524696342f946b6117a2d7f019f401c3bbd
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Fri, 16 Apr 2010 21:49:19 +0000 (14:49 -0700)]
[ARM] tegra: timer: Add suspend wakeup and 32khz timers
the LP2 idle state can not be woken by the internal ARM timers,
so reserve the last APB system timer for use as an LP2 wakeup
trigger
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Tue, 6 Apr 2010 03:30:59 +0000 (20:30 -0700)]
[ARM] tegra: irq: Add support for suspend wake sources
Change-Id: I863c6db6deedd6fce52dc1b912cfdbc8d16f8c55
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 18 Aug 2010 07:19:58 +0000 (00:19 -0700)]
[ARM] tegra: pinmux: Add missing drive pingroups and fix suspend
Adds missing drive pingroups, saves all drive pingroups in
suspend, and restores the pinmux registers in the proper order.
Change-Id: I17155d86de946f162aa35d369e265504b177624b
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Mon, 4 Oct 2010 18:49:26 +0000 (11:49 -0700)]
[ARM] tegra: clock: Suspend fixes, and add new clocks
Save and restore pll and osc state during suspend
Add digital audio clocks
Update clk dev associations
Correct max clock frequencies
Add pll_p as additional cpu clock state
Add values to plld table
Fix register offset for sdmmc4 clock
Add blink timer to tegra2_clocks
Change-Id: I7fa71452c4a6683b586abb0a3906e39e6549d1bc
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Mon, 4 Oct 2010 15:49:49 +0000 (08:49 -0700)]
[ARM] tegra: Add prototypes for subsystem suspend functions
Change-Id: If14c826e8919f5de11331a5c45994fe7e451330a
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Mon, 4 Oct 2010 04:24:28 +0000 (21:24 -0700)]
[ARM] tegra: irqs: Update irq list
Fixes typo in INT_CPU1_PMU_INTR (original fix from Will Deacon)
Adds board irqs
Change-Id: I46c49ee4f6b8215242314622b59c9621321282f2
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 25 May 2010 00:07:46 +0000 (17:07 -0700)]
[ARM] tegra: Add api to control internal powergating
Change-Id: Ibb233ed06ad7f045504822a1ffd57852e50216ee
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 6 Aug 2010 21:29:14 +0000 (14:29 -0700)]
[ARM] tegra: Centralize macros to define debug uart base
Signed-off-by: Colin Cross <ccross@google.com>
Colin Cross [Fri, 1 Oct 2010 01:01:18 +0000 (18:01 -0700)]
[ARM] gic: Export irq chip functions
Some systems combine the GIC with an external interrupt controller.
On these systems it may be necessary to update both the GIC registers
and the external controller's registers to control IRQ behavior.
Export the irq chip functions so that these systems can define a
custom irq chip that calls into the GIC handlers.
Change-Id: I17fc4440fa2c91cc63004abf69c8e872b55c83c6
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 1 Oct 2010 00:52:45 +0000 (17:52 -0700)]
[ARM] gic: Add functions to save and restore gic state
on systems with idle states which power-gate the logic including
the gic, such as tegra, the gic distributor needs to be shut down
and restored on entry and exit from the architecture idle code
Change-Id: I17603f5ac70d65c05587d0647cce3ba87675e117
Original-author: Gary King <gking@nvidia.com>
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Mon, 28 Jun 2010 23:23:01 +0000 (16:23 -0700)]
[ARM] cache_l2x0: add shutdown and restart functions
Add shutdown and restart functions to the L2X0 outer cache controller,
so that machines which need to flush and disable the outer cache
controller prior to executing the architecture reset or platform
suspend code can do so.
Change-Id: I042aae121e7ba75223ed502afb4d118b0441597e
Signed-off-by: Gary King <gking@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Tue, 20 Apr 2010 22:20:03 +0000 (15:20 -0700)]
[ARM] l2x0: add declaration for PREFETCH_OFFSET register
Change-Id: I0fc2aba8b332697533e1396aab2e613bc7179c33
Signed-off-by: Gary King <gking@nvidia.com>
Catalin Marinas [Mon, 29 Mar 2010 12:58:11 +0000 (13:58 +0100)]
ARM: Improve the L2 cache performance when PL310 is used
With this L2 cache controller, the cache maintenance by PA and sync
operations are atomic and do not require a "wait" loop or spinlocks.
This patch conditionally defines the cache_wait() function and locking
primitives (rather than duplicating the functions or file).
Since L2x0 cache controllers do not work with ARMv7 CPUs, the patch
automatically enables CACHE_PL310 when CPU_V7 is defined.
Change-Id: I23e8fc326e6c42e7b36c7b67393fa91576692b48
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Gary King [Wed, 24 Mar 2010 21:46:53 +0000 (14:46 -0700)]
ARM: enable CONFIG_CPU_IDLE support
add ARCH_HAS_CPU_IDLE_WAIT and ARCH_HAS_DEFAULT_IDLE configuration,
and expose default_idle and cpu_idle_wait
cpu_idle_wait implementation based on the implementation in the x86 tree
Signed-off-by: Gary King <gking@nvidia.com>
Erik Gilling [Thu, 22 Apr 2010 22:58:25 +0000 (15:58 -0700)]
spi: add spi_tegra driver
v2 changes:
from Thierry Reding:
* add "select TEGRA_SYSTEM_DMA" to Kconfig
from Grant Likely:
* add oneline description to header
* inline references to DRIVER_NAME
* inline references to BUSY_TIMEOUT
* open coded bytes_per_word()
* spi_readl/writel -> spi_tegra_readl/writel
* move transfer validation to spi_tegra_transfer
* don't request_mem_region iomem as platform bus does that for us
* __exit -> __devexit
v3 changes:
from Russell King:
* put request_mem_region back int
from Grant Likely:
* remove #undef DEBUG
* add SLINK_ to register bit defines
* remove unused bytes_per_word
* make spi_tegra_readl/writel static linine
* various refactoring for clarity
* mark err if BSY bit is not cleared after 1000 retries
* move spinlock to protect setting of RDY bit
* subsys_initcall -> module_init
v3 changes:
from Grant Likely:
* update spi_tegra to use PTR_ERRless dma API
Signed-off-by: Erik Gilling <konkers@android.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Russell King <linux@arm.linux.org.uk>
Colin Cross [Mon, 5 Apr 2010 20:16:42 +0000 (13:16 -0700)]
[ARM] tegra: Add APB DMA support
The APB DMA block handles DMA transfers to and from some peripherals
in the Tegra SOC. It reads from sequential addresses on the memory
bus, and writes repeatedly to the same address on the APB bus.
Two transfer modes are supported, oneshot for transferring a known
size to or from a peripheral, and continuous for streaming data.
In continuous mode, a callback occurs when the buffer is half full
to allow the existing data to be handled and a new request queued.x
v2 changes:
dma API no longer uses PTR_ERR
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 11 Feb 2010 01:13:29 +0000 (17:13 -0800)]
[ARM] tegra: Add tegra_defconfig
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Colin Cross [Fri, 23 Apr 2010 03:30:13 +0000 (20:30 -0700)]
[ARM] tegra: Add cpufreq support
Implement cpufreq support for the Tegra SOC. DVFS is handled by the
core virtual cpu clock. The frequencies of the two cores are tied
together, the highest frequency requested by either core determines
the actual frequency.
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 25 Jun 2010 01:57:00 +0000 (18:57 -0700)]
[ARM] tegra: common: Update common clock init table
Renames clocks in the clock init table to match the datasheet names
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 8 Jun 2010 03:49:46 +0000 (20:49 -0700)]
[ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
- Add drivers to clock lookup table
- Add new pll_m entries
- Support I2C U16 divider
- Fix rate reporting on 32.768kHz clock
- Call propagate rate only if set_rate succeeds
- Add support for audio_sync clock
- Add 24MHz to PLLA frequency list
- Correct i2s1/2/spdifout mux
- Add suspend support
- Fix enable/disable parent clocks in set_parent
- Add max_rate parameter to all clocks
- DVFS support
- Add virtual cpu clock with dvfs
- Support clk_round_rate
- Fix requesting very high periph frequencies
- Add quirks for PLLU:
PLLU is slightly different from the rest of the PLLs. The
lock enable bit is at bit 22 instead of 18 in the MISC
register, and the post divider field is a single bit with
reversed values from other PLLs.
- Simplify recalculating clock rates
- Fix UART divider flags
- Remove unused clock ops
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 23 Jun 2010 22:49:17 +0000 (15:49 -0700)]
[ARM] tegra: Add support for reading fuses
The Tegra SOC contains fuses to identify the CPU type and
bin, and a unique id. The CPU info is required to determine
the correct voltages for each cpu and core frequency.
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 7 Apr 2010 19:59:42 +0000 (12:59 -0700)]
[ARM] tegra: gpio: Add suspend and wake support
Includes checkpatch fixes and TEGRA_NR_GPIOS changes from
Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 9 Jul 2010 22:13:52 +0000 (15:13 -0700)]
[ARM] tegra: pinmux: add safe values, move tegra2, add suspend
- the reset values for some pin groups in the tegra pin mux can result in
functional errors due to conflicting with actively-configured pin groups
muxing from the same controller. this change adds a known safe, non-
conflicting mux for every pin group, which can be used on platforms
where the pin group is not routed to any peripheral
- also add each pin group's I/O voltage rail, to enable platform code to
map from the pin groups used by each interface to the regulators used
for dynamic voltage control
- add routines to individually configure the tristate, pin mux and pull-
ups for a pingroup_config array, so that it is possible to program
individual values at run-time without modifying other values.
this allows driver power-management code to reprogram individual
interfaces into lower power states during idle / suspend, or to
reprogram the pin mux to support multiple physical busses per
internal controller (e.g., sharing a single I2C or SPI controller
across multiple pin groups)
- move chip-specific data like pingroups and drive-pingroups
out of the common code and into chip-specific code
- fix debug output for group with no pullups
- add a TEGRA_MUX_SAFE function. Setting a pingroup to TEGRA_MUX_SAFE
will automatically select a mux setting that is guaranteed not to
conflict with any of the hardware blocks.
Signed-off-by: Gary King <gking@nvidia.com>
Gary King [Tue, 6 Apr 2010 03:30:59 +0000 (20:30 -0700)]
[ARM] tegra: add suspend and mirror irqs to legacy controller
mirror IRQ enable and disable operations on the legacy PPI system
interrupt controller, since the legacy controller is responsible
for responding to wakeup interrupts when the CPU is in LP2 idle mode
save the irq controller state on suspend and restore on resume
Signed-off-by: Gary King <gking@nvidia.com>
Colin Cross [Mon, 5 Apr 2010 22:22:21 +0000 (15:22 -0700)]
[ARM] tegra: Add legacy irq support
The "legacy irq controller" duplicates the functionality of the GIC,
but remains powered during the cpu suspend and idle modes that power
down the CPU and the GIC.
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 28 Jul 2010 04:34:38 +0000 (21:34 -0700)]
[ARM] tegra: update iomap
Add missing io address map entries from datasheet.
Add the IRAM area to the statically mapped io regions.
Correct the onewire, USB, and statmon addresses
Signed-off-by: Colin Cross <ccross@android.com>
Linus Torvalds [Wed, 29 Sep 2010 01:01:22 +0000 (18:01 -0700)]
Linux 2.6.36-rc6
David Howells [Wed, 29 Sep 2010 00:57:02 +0000 (01:57 +0100)]
MN10300: Handle missing sys_cacheflush() when caching disabled
When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.
Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 28 Sep 2010 20:26:57 +0000 (13:26 -0700)]
alpha: fix compile problem in arch/alpha/kernel/signal.c
Tssk. Apparently Al hadn't checked commit
c52c2ddc1dfa ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.
Fixed as per suggestions from Michael Cree.
Reported-by: Michael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 28 Sep 2010 19:38:52 +0000 (12:38 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ahci: fix module refcount breakage introduced by libahci split
Tejun Heo [Tue, 21 Sep 2010 07:25:48 +0000 (09:25 +0200)]
ahci: fix module refcount breakage introduced by libahci split
libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver. During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted. This made ahci and ahci_platform always
unloadable even while they're being actively used.
Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.
stable: only applicable to 2.6.35.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Linus Torvalds [Tue, 28 Sep 2010 19:13:13 +0000 (12:13 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
hwmon (coretemp): Fix build breakage if SMP is undefined
Linus Torvalds [Tue, 28 Sep 2010 19:02:22 +0000 (12:02 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: fix pci_resource_alignment prototype
Linus Torvalds [Tue, 28 Sep 2010 19:01:26 +0000 (12:01 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
tcp: Fix >4GB writes on 64-bit.
net/9p: Mount only matching virtio channels
de2104x: fix ethtool
tproxy: check for transparent flag in ip_route_newports
ipv6: add IPv6 to neighbour table overflow warning
tcp: fix TSO FACK loss marking in tcp_mark_head_lost
3c59x: fix regression from patch "Add ethtool WOL support"
ipv6: add a missing unregister_pernet_subsys call
s390: use free_netdev(netdev) instead of kfree()
sgiseeq: use free_netdev(netdev) instead of kfree()
rionet: use free_netdev(netdev) instead of kfree()
ibm_newemac: use free_netdev(netdev) instead of kfree()
smsc911x: Add MODULE_ALIAS()
net: reset skb queue mapping when rx'ing over tunnel
br2684: fix scheduling while atomic
de2104x: fix TP link detection
de2104x: fix power management
de2104x: disable autonegotiation on broken hardware
net: fix a lockdep splat
e1000e: 82579 do not gate auto config of PHY by hardware during nominal use
...
Guenter Roeck [Tue, 28 Sep 2010 01:01:49 +0000 (18:01 -0700)]
hwmon (coretemp): Fix build breakage if SMP is undefined
Commit
e40cc4bdfd4b89813f072f72bd9c7055814d3f0f introduced
a build breakage if CONFIG_SMP is undefined. This commit
fixes the problem.
This fix is only a workaround. For a real fix, cpu_sibling_mask() should
be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be
included directly. This fix is currently not possible because asm/smp.h defines
cpu_sibling_mask() unconditionally and is included directly from many source
files.
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Linus Torvalds [Tue, 28 Sep 2010 04:19:27 +0000 (21:19 -0700)]
Merge branch 'x86/urgent' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
David S. Miller [Tue, 28 Sep 2010 03:24:54 +0000 (20:24 -0700)]
tcp: Fix >4GB writes on 64-bit.
Fixes kernel bugzilla #16603
tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.
There is also the problem higher up of how verify_iovec() works. It
wants to prevent the total length from looking like an error return
value.
However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines). So it could trigger
false-positives on 64-bit as written. So fix it to use 'long'.
Reported-by: Olaf Bonorden <bono@onlinehome.de>
Reported-by: Daniel Büse <dbuese@gmx.de>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Rosenberg [Mon, 27 Sep 2010 16:30:28 +0000 (12:30 -0400)]
Fix pktcdvd ioctl dev_minor range check
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array. The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.
This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference. This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Mon, 27 Sep 2010 12:12:33 +0000 (13:12 +0100)]
MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0
The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sven Eckelmann [Mon, 27 Sep 2010 22:54:44 +0000 (15:54 -0700)]
net/9p: Mount only matching virtio channels
p9_virtio_create will only compare the the channel's tag characters
against the device name till the end of the channel's tag but not till
the end of the device name. This means that if a user defines channels
with the tags foo and foobar then he would mount foo when he requested
foonot and may mount foo when he requested foobar.
Thus it is necessary to check both string lengths against each other in
case of a successful partial string match.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ondrej Zary [Mon, 27 Sep 2010 11:41:45 +0000 (11:41 +0000)]
de2104x: fix ethtool
When the interface is up, using ethtool breaks it because:
a) link is put down but media_timer interval is not shortened to NO_LINK
b) rxtx is stopped but not restarted
Also manual 10baseT-HD (and probably FD too - untested) mode does not work -
the link is forced up, packets are transmitted but nothing is received.
Changing CSR14 value to match documentation (not disabling link check) fixes this.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Sep 2010 22:04:23 +0000 (15:04 -0700)]
Merge branch 'vhost-net' of git://git./linux/kernel/git/mst/vhost
Ulrich Weber [Mon, 27 Sep 2010 03:31:00 +0000 (03:31 +0000)]
tproxy: check for transparent flag in ip_route_newports
as done in ip_route_connect()
Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ulrich Weber [Mon, 27 Sep 2010 22:02:18 +0000 (15:02 -0700)]
ipv6: add IPv6 to neighbour table overflow warning
IPv4 and IPv6 have separate neighbour tables, so
the warning messages should be distinguishable.
[ Add a suitable message prefix on the ipv4 side as well -DaveM ]
Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Fri, 24 Sep 2010 13:22:06 +0000 (13:22 +0000)]
tcp: fix TSO FACK loss marking in tcp_mark_head_lost
When TCP uses FACK algorithm to mark lost packets in
tcp_mark_head_lost(), if the number of packets in the (TSO) skb is
greater than the number of packets that should be marked lost, TCP
incorrectly exits the loop and marks no packets lost in the skb. This
underestimates tp->lost_out and affects the recovery/retransmission.
This patch fargments the skb and marks the correct amount of packets
lost.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 27 Sep 2010 19:33:54 +0000 (12:33 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/cxgb3: Turn off RX coalescing for iWARP connections
Linus Torvalds [Mon, 27 Sep 2010 19:32:36 +0000 (12:32 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
ARM: 6408/1: omap: Map only available sram memory
ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
ARM: pxa: remove pr_<level> uses of KERN_<level>
ARM: pxa168fb: clear enable bit when not active
ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
ARM: pxa168: fix corrected reset vector
ARM: pxa: Use PIO for PI2C communication on Palm27x
ARM: pxa: Fix Vpac270 gpio_power for MMC
ARM: 6401/1: plug a race in the alignment trap handler
ARM: 6406/1: at91sam9g45: fix i2c bus speed
leds: leds-ns2: fix locking
ARM: dove: fix __io() definition to use bus based offset
dmaengine: fix interrupt clearing for mv_xor
ARM: kirkwood: Unbreak PCIe I/O port
ARM: Fix build error when using KCONFIG_CONFIG
ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
ARM: 6400/1: at91: fix arch_gettimeoffset fallout
ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
...
Linus Torvalds [Mon, 27 Sep 2010 19:32:00 +0000 (12:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
net/9p: fix memory handling/allocation in rdma_request()
Linus Torvalds [Mon, 27 Sep 2010 19:31:12 +0000 (12:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Fix driver module removal
Linus Torvalds [Mon, 27 Sep 2010 19:29:39 +0000 (12:29 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
TOMOYO: Don't abuse sys_getpid(), sys_getppid()
Linus Torvalds [Mon, 27 Sep 2010 19:28:19 +0000 (12:28 -0700)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully
drm/i915/sdvo: Cleanup connector on error path
drm/i915: Fix 945GM regression in
e259befd
Linus Torvalds [Mon, 27 Sep 2010 19:27:00 +0000 (12:27 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
mmc: sdhci-s3c: fix incorrect spinlock usage after merge
mmc: MAINTAINERS: add myself as MMC maintainer
Linus Torvalds [Mon, 27 Sep 2010 19:26:33 +0000 (12:26 -0700)]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: pd6729: Fix error path
pcmcia: preserve configuration information if request_io fails partly
Linus Torvalds [Mon, 27 Sep 2010 19:25:10 +0000 (12:25 -0700)]
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a
intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
Linus Torvalds [Mon, 27 Sep 2010 19:22:21 +0000 (12:22 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/amd-iommu: Fix rounding-bug in __unmap_single
x86/amd-iommu: Work around S3 BIOS bug
x86/amd-iommu: Set iommu configuration flags in enable-loop
x86, setup: Fix earlyprintk=serial,0x3f8,115200
x86, setup: Fix earlyprintk=serial,ttyS0,115200
Linus Torvalds [Mon, 27 Sep 2010 19:21:48 +0000 (12:21 -0700)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Catch spurious interrupts after disabling counters
tracing/x86: Don't use mcount in kvmclock.c
tracing/x86: Don't use mcount in pvclock.c
Al Viro [Sun, 26 Sep 2010 18:29:12 +0000 (19:29 +0100)]
mn10300: check __get_user/__put_user results...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:29:02 +0000 (19:29 +0100)]
mn10300: get rid of set_fs(USER_DS) in sigframe setup
It really has no business being there; short of a serious kernel bug
we should already have USER_DS at that point. It shouldn't have been
done on x86 either...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:52 +0000 (19:28 +0100)]
mn10300: ->restart_block.fn needs to be reset on sigreturn
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:42 +0000 (19:28 +0100)]
mn10300: prevent double syscall restarts
set ->orig_d0 to -1, same as what sigreturn does
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:32 +0000 (19:28 +0100)]
mn10300: avoid SIGSEGV delivery loop
force_sigsegv() is there for purpose...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:22 +0000 (19:28 +0100)]
alpha: __get_user/__put_user results need to be checked...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 26 Sep 2010 18:28:12 +0000 (19:28 +0100)]
alpha: switch osf_sigprocmask() to use of sigprocmask()
get rid of a useless wrapper, while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Beulich [Mon, 27 Sep 2010 18:07:00 +0000 (11:07 -0700)]
3c59x: fix regression from patch "Add ethtool WOL support"
This patch (commit
690a1f2002a3091bd18a501f46c9530f10481463) added a
new call site for acpi_set_WOL() without checking that the function is
actually suitable to be called via
vortex_set_wol+0xcd/0xe0 [3c59x]
dev_ethtool+0xa5a/0xb70
dev_ioctl+0x2e0/0x4b0
T.961+0x49/0x50
sock_ioctl+0x47/0x290
do_vfs_ioctl+0x7f/0x340
sys_ioctl+0x80/0xa0
system_call_fastpath+0x16/0x1b
i.e. outside of code paths run when the device is not yet enabled or
already disabled. In particular, putting the device into D3hot is a
pretty bad idea when it was already brought up.
Furthermore, all prior callers of the function made sure they're
actually dealing with a PCI device, while the newly added one didn't.
In the same spirit, the .get_wol handler shouldn't indicate support
for WOL for non-PCI devices.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Wise [Sun, 19 Sep 2010 00:38:21 +0000 (19:38 -0500)]
RDMA/cxgb3: Turn off RX coalescing for iWARP connections
The HW by default has RX coalescing on. For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW. So explicitly turn RX
coalescing off when setting up iWARP connections.
This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Will Deacon [Mon, 27 Sep 2010 13:55:15 +0000 (14:55 +0100)]
ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need
to add additional latency when accessing its cache RAMs. Unfortunately,
the boot monitor sets this up for an 8-cycle delay on reads and writes,
resulting in greatly reduced memory performance when the L2 cache is
enabled.
This patch sets the L2 RAM latencies to the correct value of 1 cycle
on the ct-ca9x4 tile before enabling the L2 cache.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Davidlohr Bueso [Mon, 13 Sep 2010 15:53:18 +0000 (15:53 +0000)]
net/9p: fix memory handling/allocation in rdma_request()
Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Borislav Petkov [Sun, 26 Sep 2010 10:42:23 +0000 (12:42 +0200)]
amd64_edac: Fix driver module removal
f4347553b30ec66530bfe63c84530afea3803396 removed the edac polling
mechanism in favor of using a notifier chain for conveying MCE
information to edac. However, the module removal path didn't test
whether the driver had setup the polling function workqueue at all and
the rmmod process was hanging in the kernel at try_to_del_timer_sync()
in the cancel_delayed_work() path, trying to cancel an uninitialized
work struct.
Fix that by adding a balancing check to the workqueue removal path.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Alexander Chumachenko [Thu, 1 Apr 2010 12:34:52 +0000 (15:34 +0300)]
x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
While debugging bit_spin_lock() hang, it was tracked down to gcc-4.4
misoptimization of non-inlined constant_test_bit() due to non-volatile
addr when 'const volatile unsigned long *addr' cast to 'unsigned long *'
with subsequent unconditional jump to pause (and not to the test) leading
to hang.
Compiling with gcc-4.3 or disabling CONFIG_OPTIMIZE_INLINING yields inlined
constant_test_bit() and correct jump, thus working around the kernel bug.
Other arches than asm-x86 may implement this slightly differently;
2.6.29 mitigates the misoptimization by changing the function prototype
(commit
c4295fbb6048d85f0b41c5ced5cbf63f6811c46c) but probably fixing the issue
itself is better.
Signed-off-by: Alexander Chumachenko <ledest@gmail.com>
Signed-off-by: Michael Shigorin <mike@osdn.org.ua>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Neil Horman [Fri, 24 Sep 2010 09:55:52 +0000 (09:55 +0000)]
ipv6: add a missing unregister_pernet_subsys call
Clean up a missing exit path in the ipv6 module init routines. In
addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys
for the ipv6_addr_label_ops structure. But if module loading fails, or if the
ipv6 module is removed, there is no corresponding unregister_pernet_subsys call,
which leaves a now-bogus address on the pernet_list, leading to oopses in
subsequent registrations. This patch cleans up both the failed load path and
the unload path. Tested by myself with good results.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
include/net/addrconf.h | 1 +
net/ipv6/addrconf.c | 11 ++++++++---
net/ipv6/addrlabel.c | 5 +++++
3 files changed, 14 insertions(+), 3 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasiliy Kulikov [Mon, 27 Sep 2010 01:56:06 +0000 (18:56 -0700)]
s390: use free_netdev(netdev) instead of kfree()
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 25 Sep 2010 23:58:06 +0000 (23:58 +0000)]
sgiseeq: use free_netdev(netdev) instead of kfree()
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 25 Sep 2010 23:58:03 +0000 (23:58 +0000)]
rionet: use free_netdev(netdev) instead of kfree()
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: David S. Miller <davem@davemloft.net>
Kulikov Vasiliy [Sat, 25 Sep 2010 23:58:00 +0000 (23:58 +0000)]
ibm_newemac: use free_netdev(netdev) instead of kfree()
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
@@
struct net_device* dev;
@@
-kfree(dev)
+free_netdev(dev)
Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Stehlé [Mon, 27 Sep 2010 01:50:05 +0000 (18:50 -0700)]
smsc911x: Add MODULE_ALIAS()
This enables auto loading for the smsc911x ethernet driver.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Thu, 23 Sep 2010 11:19:54 +0000 (11:19 +0000)]
net: reset skb queue mapping when rx'ing over tunnel
Reset queue mapping when an skb is reentering the stack via a tunnel.
On second pass, the queue mapping from the original device is no
longer valid.
Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karl Hiramoto [Thu, 23 Sep 2010 01:50:54 +0000 (01:50 +0000)]
br2684: fix scheduling while atomic
You can't call atomic_notifier_chain_unregister() while in atomic context.
Fix, call un/register_atmdevice_notifier in module __init and __exit.
Bug report:
http://comments.gmane.org/gmane.linux.network/172603
Reported-by: Mikko Vinni <mmvinni@yahoo.com>
Tested-by: Mikko Vinni <mmvinni@yahoo.com>
Signed-off-by: Karl Hiramoto <karl@hiramoto.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sun, 26 Sep 2010 04:55:13 +0000 (05:55 +0100)]
TOMOYO: Don't abuse sys_getpid(), sys_getppid()
System call entry functions sys_*() are never to be called from
general kernel code. The fact that they aren't declared in header
files should have been a clue. These functions also don't exist on
Alpha since it has sys_getxpid() instead.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
Ondrej Zary [Sat, 25 Sep 2010 10:39:17 +0000 (10:39 +0000)]
de2104x: fix TP link detection
Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the
SROM contains AUI port too. When TP loses link, the driver switches to
non-existing AUI port (which reports that carrier is always present).
Connecting TP back generates LinkPass interrupt but de_media_interrupt() is
broken - it only updates the link state of currently connected media, ignoring
the fact that LinkPass and LinkFail bits of MacStatus register belong to the
TP port only (the chip documentation says that).
This patch changes de_media_interrupt() to switch media to TP when link goes
up (and media type is not locked) and also to update the link state only when
the TP port is used.
Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register
need to be cleared (by writing 1) after reading or they're useless.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ondrej Zary [Fri, 24 Sep 2010 23:57:02 +0000 (23:57 +0000)]
de2104x: fix power management
At least my 21041 cards come out of suspend with bus mastering disabled so
they did not work after resume(no data transferred).
After adding pci_set_master(), the driver oopsed immediately on resume -
because de_clean_rings() is called on suspend but de_init_rings() call
was missing in resume.
Also disable link (reset SIA) before sleep (de4x5 does this too).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Szyprowski [Thu, 23 Sep 2010 14:22:05 +0000 (16:22 +0200)]
mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove
If not all clocks have been defined in platform data, the driver will
cause a null pointer dereference when it is removed. This patch fixes
this issue.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Marek Szyprowski [Mon, 20 Sep 2010 13:03:42 +0000 (15:03 +0200)]
mmc: sdhci-s3c: fix incorrect spinlock usage after merge
In the commit
f522886e202a34a2191dd5d471b3c4d46410a9a0 a merge conflict
in the sdhci-s3c driver been fixed. However the fix used incorrect
spinlock operation - it caused a race with sdhci interrupt service. The
correct way to solve it is to use spin_lock_irqsave/irqrestore() calls.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Chris Ball [Fri, 10 Sep 2010 16:05:24 +0000 (12:05 -0400)]
mmc: MAINTAINERS: add myself as MMC maintainer
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Pierre Ossman <pierre-list@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rahul Ruikar [Sun, 26 Sep 2010 11:30:29 +0000 (17:00 +0530)]
pcmcia: pd6729: Fix error path
In error return path
call pci_disable_device() which was enabled earlier.
Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Al Viro [Sat, 25 Sep 2010 20:07:51 +0000 (21:07 +0100)]
alpha: fix usp value in multithreaded coredumps
rdusp() gives us the right value only for the current thread...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 25 Sep 2010 20:07:14 +0000 (21:07 +0100)]
alpha: fix hae_cache race in RESTORE_ALL
We want interrupts disabled on all paths leading to RESTORE_ALL;
otherwise, we are risking an IRQ coming between the updates of
alpha_mv->hae_cache and *alpha_mv->hae_register and set_hae()
within the IRQ getting badly confused.
RESTORE_ALL used to play with disabling IRQ itself, but that got
removed back in 2002, without making sure we had them disabled
on all paths. It's cheaper to make sure we have them disabled than
to revert to original variant...
Remove the detritus left from that commit back in 2002; we used to
need a reload of $0 and $1 since swpipl would change those, but
doing that had become pointless when we stopped doing swpipl in
there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 25 Sep 2010 16:51:54 +0000 (09:51 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: prevent merges of discard and write requests
Linus Torvalds [Sat, 25 Sep 2010 16:51:31 +0000 (09:51 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory
ALSA: hda - Fix auto-parse of SPDIF input of Realtek codecs
ASoC: Fix multi-componentism
ASoC: Fix soc-cache buffer overflow bug
ALSA: oxygen: fix analog capture on Claro halo cards
ALSA: hda - Add Dell Latitude E6400 model quirk
ASoC: fix clkdev API usage in sh/migor.c
Larry Woodman [Fri, 24 Sep 2010 16:04:48 +0000 (12:04 -0400)]
Avoid pgoff overflow in remap_file_pages
Thomas Pollet noticed that the remap_file_pages() system call in
fremap.c has a potential overflow in the first part of the if statement
below, which could cause it to process bogus input parameters.
Specifically the pgoff + size parameters could be wrap thereby
preventing the system call from failing when it should.
Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Larry Woodman <lwoodman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Sat, 25 Sep 2010 15:57:53 +0000 (17:57 +0200)]
Merge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 25 Sep 2010 15:57:49 +0000 (17:57 +0200)]
Merge branch 'fix/asoc' into for-linus
Dan Rosenberg [Sat, 25 Sep 2010 15:07:27 +0000 (11:07 -0400)]
ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory
The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and
SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow
unprivileged users to read uninitialized kernel stack memory, because
several fields of the hdsp{m}_config_info structs declared on the stack
are not altered or zeroed before being copied back to the user. This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>