Praveen Bharathi [Mon, 7 Jun 2010 19:27:38 +0000 (14:27 -0500)]
[ARM] tegra: stingray: Enable akm8975 and disable akm8973
Change-Id: I81054bf25b33bc18b36366900ef59ca0c2ae4299
Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
Praveen Bharathi [Mon, 7 Jun 2010 19:28:54 +0000 (14:28 -0500)]
[ARM] tegra: stingray: Add akm8975 magnetometer data
Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
Change-Id: If3fa5e2b624dd164252df8dd73c1063306637734
Jaikumar Ganesh [Fri, 11 Jun 2010 17:57:11 +0000 (10:57 -0700)]
Add rfkill for BCM 4329 for bluetooth.
Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
Dan Murphy [Mon, 14 Jun 2010 14:41:36 +0000 (09:41 -0500)]
[ARM] tegra: stingray: Update backlight control register value
direct control as opposed to PWM
Change-Id: I20405dcc41806d32c771cf591463a1b199a1d472
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Mon, 14 Jun 2010 14:39:33 +0000 (09:39 -0500)]
leds: lp8550 driver update.
Fix the EEPROM writing as there was a typo in the data sheet.
Fix the brightness set function to correctly change the brightness
of the LEDs. And turn the LEDS off appropriately
Change-Id: Ie0f07c7f8433014729d8108c4785e8dddf962859
Signed-off-by: Dan Murphy <wldm10@motorola.com>
James Wylder [Wed, 16 Jun 2010 16:21:42 +0000 (11:21 -0500)]
[ARM] tegra: stingray: boardfile - handle power-off failure (factory cable).
With a factory cable plugged in, the power-off mechanisms are disabled.
This reproduces the behavior in sholes of spinning at power-off if
the factory cable is plugged in.
Signed-off-by: James Wylder <james.wylder@motorola.com>
Colin Cross [Tue, 15 Jun 2010 21:28:17 +0000 (14:28 -0700)]
[ARM] tegra: stingray: Enable cpuidle and cpufreq
Change-Id: I6b8674e9519b00b9d041df2bca18f05c57152e64
Signed-off-by: Colin Cross <ccross@android.com>
Mike Lockwood [Tue, 15 Jun 2010 00:22:24 +0000 (17:22 -0700)]
[ARM] tegra: stingray: Enable MTP USB function, disable other unused functions.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Mike Lockwood [Tue, 15 Jun 2010 00:21:39 +0000 (17:21 -0700)]
[ARM] tegra: stingray: Board file support for MTP USB function.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Colin Cross [Mon, 14 Jun 2010 23:08:36 +0000 (16:08 -0700)]
[ARM] tegra: stingray: Set i2c bus speed
Change-Id: I0dc652cf87be9109ec7b12e03a83921961e98b85
Signed-off-by: Colin Cross <ccross@android.com>
Dan Murphy [Thu, 10 Jun 2010 15:14:02 +0000 (10:14 -0500)]
[ARM] Stingray defconfig: Expose the I2C char device
Turn on the defconfig flag to expose the I2C char device.
This change is needed for testing devices over the I2C bus where
the test code resides in user space.
Change-Id: I76678809cd606d58ae7f653248efee562130f45f
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Erik Gilling [Wed, 9 Jun 2010 23:50:57 +0000 (16:50 -0700)]
[ARM] tegra: add NV* to stingray_defconfig
Signed-off-by: Erik Gilling <konkers@android.com>
Greg Meiste [Tue, 1 Jun 2010 19:33:31 +0000 (14:33 -0500)]
mfd: cpcap-whisper: Report audio cable
Whisper detection driver will now report to the system when an audio cable
is attached to the Whisper accessory. The presence of the audio cable
can be found at /sys/class/switch/usb_audio/state. The audio status will
not be reported until the accessory is validated by the Whisper daemon.
Change-Id: I7883403abdc8e86096e241e5a7e656b233db5296
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Wed, 9 Jun 2010 16:24:57 +0000 (11:24 -0500)]
[ARM] tegra: stingray: Initialize SW1, SW6, RF1, RF2, and RFREF to off
They are not connected on Stingray and should be initialized off.
Change-Id: I8b195d00153c1ab70cd0450a66b7a6e7519aecc4
Signed-off-by: Greg Meiste <w30289@motorola.com>
Dan Murphy [Tue, 8 Jun 2010 19:10:39 +0000 (14:10 -0500)]
[ARM] Stingray defconfig: Add LP8550 defconfig flag
Change-Id: I10da2f54704fd66437c70e21f5eb321544fecff3
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 8 Jun 2010 19:09:39 +0000 (14:09 -0500)]
[ARM] Stingray panel board file: Add lp8550 board file data
Add LP8550 board file data. This driver is only available for P1's
Change-Id: I5a6d250174085494111a944ba97bd5fb4c35b83c
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 8 Jun 2010 19:08:27 +0000 (14:08 -0500)]
leds: National LP8550 LED driver for the display
Initial submission of the National LP8550 driver for p1
Change-Id: I2d2dc42a1c06fbc682fd8f556fa89c864c749db8
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Erik Gilling [Wed, 9 Jun 2010 06:37:42 +0000 (23:37 -0700)]
HACK: [ARM] update PRRR and NMRR registers to agree with nvmap
Signed-off-by: Erik Gilling <konkers@android.com>
Colin Cross [Tue, 8 Jun 2010 03:47:33 +0000 (20:47 -0700)]
HACK: [ARM] tegra: stingray: Initialize emc clock to 600MHz
Change-Id: I3a7df1165b2bc8de1982b26980697bc461932e2e
Signed-off-by: Colin Cross <ccross@android.com>
Erik Gilling [Wed, 19 May 2010 21:19:01 +0000 (14:19 -0700)]
HACK: [ARM] tegra: add 3d support to stingray board file
Signed-off-by: Erik Gilling <konkers@android.com>
Erik Gilling [Fri, 7 May 2010 22:05:29 +0000 (15:05 -0700)]
HACK: [ARM] tegra: add 3d support to olympus board file
Signed-off-by: Erik Gilling <konkers@android.com>
Erik Gilling [Wed, 12 May 2010 23:04:49 +0000 (16:04 -0700)]
HACK: [ARM] tegra: add nvos, nvrm, and nvmap
Signed-off-by: Erik Gilling <konkers@android.com>
Erik Gilling [Tue, 18 May 2010 22:14:46 +0000 (15:14 -0700)]
HACK: [ARM] tegra: reduce vmalloc space for nvmap
Signed-off-by: Erik Gilling <konkers@android.com>
Dan Murphy [Tue, 8 Jun 2010 17:21:58 +0000 (12:21 -0500)]
[ARM] Stingray SPI board file: Modify the LED sink value for the P0
Change the LED sink value for the P0 units and add backward capability
for the M1
Change-Id: I4b5e0675956a9bd21125a7d38393269c23426de0
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 8 Jun 2010 15:42:48 +0000 (10:42 -0500)]
[ARM] Stingray sensor board file: Add values to the barometer
Adding min, max, fuzz and flat to the board file for the barometer
Change-Id: I2a4f4b52c58f2a7e6192e7e9a2fc1316345b70a5
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Colin Cross [Fri, 4 Jun 2010 00:52:02 +0000 (17:52 -0700)]
[ARM] tegra: stingray: Add hsuarts
Change-Id: I70d0ee59b262915379dcfda208f5ec8be3dab702
Signed-off-by: Colin Cross <ccross@android.com>
makarand.karvekar [Mon, 7 Jun 2010 23:33:54 +0000 (16:33 -0700)]
[ARM] stingray: Load touch firmware and configuration based on board revision
Change-Id: I20c65ae20eab3ba7f58b5de02fafa3a6a677f42a
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
makarand.karvekar [Mon, 7 Jun 2010 21:46:55 +0000 (16:46 -0500)]
touch: qtouch_obp: Add 12bit resolution for x,y co-ordinates.
Added 12-bit support for x,y co-ordinates.
x,y > 1023, x,y is reported as 12-bit.
x,y < 1024, x,y is reported as 10-bit.
Add firmware for second touch panel type.
Change-Id: Icfd687a37f5b3fcbb784665bac7d270317421a9a
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Greg Meiste [Mon, 7 Jun 2010 20:34:31 +0000 (15:34 -0500)]
[ARM] tegra: stingray: CPCAP and charging changes for P0 and P1
For P0 hardware, SW5 is not connected. For P1 hardware, the charging
GPIOs have changed.
Change-Id: I9f8a95f93a1e82e636e55bd85e847f952479d636
Signed-off-by: Greg Meiste <w30289@motorola.com>
James Wylder [Mon, 7 Jun 2010 16:28:42 +0000 (11:28 -0500)]
[ARM] tegra: stingray: Add board revision identification
Add function stingray_revision to return current board
revision.
Signed-off-by: James Wylder <james.wylder@motorola.com>
Dmitry Shmidt [Fri, 4 Jun 2010 01:02:03 +0000 (18:02 -0700)]
[ARM] tegra: stingray: Provide random MAC address for wlan [HACK]
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Dan Murphy [Wed, 2 Jun 2010 15:57:12 +0000 (10:57 -0500)]
[ARM] tegra: stingray: Use generic CPCAP led driver in board file
Modify the board file to initialize multiple instances of the CPCAP LED driver
Add the privacy LED data to create a privacy LED entry.
Change-Id: Ifbd022e743a38e02b70983ff65fc721b6b0744a9
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Wed, 2 Jun 2010 16:00:11 +0000 (11:00 -0500)]
[ARM] tegra: stingray: Add generic CPCAP led to defconfig
Changed LED_CPCAP_DISP to LED_CPCAP for common CPCAP LED driver
Change-Id: Icaf6c74d1ba8b8f277de6cda66c4226048f2cdf5
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Wed, 2 Jun 2010 12:40:55 +0000 (07:40 -0500)]
leds: Create generic CPCAP led driver
Commonized the CPCAP LED driver into a single driver for all LEDs
connected to the CPCAP.
Change-Id: Ic62356010f3e1b355f7da757c3f08608765a71da
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Colin Cross [Wed, 2 Jun 2010 00:31:33 +0000 (17:31 -0700)]
misc: max9635: Disable debug messages by default
Change-Id: I648540c9765ca14d43fb17995786a80d15991518
Greg Meiste [Fri, 28 May 2010 15:36:48 +0000 (10:36 -0500)]
mfd: cpcap: Fix VUSB issues
VUSB was being left enabled even when no accessories were attached.
Part of the fix includes removing SW5 as VUSB's parent supply.
Change-Id: I01cc7dcc416c9b9d8ece7975bc1a801e839e1f46
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Fri, 28 May 2010 20:18:30 +0000 (15:18 -0500)]
[ARM] tegra: stingray: Add SW2 and SW4 regulators
Change-Id: Idf53392a596885ea2cb4c02ca2eb9d55aa07d307
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Fri, 28 May 2010 15:33:49 +0000 (10:33 -0500)]
tegra: stingray: Temporarily set SW5 to boot_on
On M1 hardware, SW5 still powers VUSB. On later hardware, SW5 will be
NC. The VUSB regulator will no longer have its parent supply set to SW5.
Change-Id: Ic0b8ede4f5547201986c73e2e7f9dbd33d5af379
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Fri, 28 May 2010 20:17:21 +0000 (15:17 -0500)]
regulator: cpcap: Add support for SW2 and SW4
Will be needed for DVS
Change-Id: I56da93ae33c1b9a01b80a703d978f6ca3cc6a0e3
Signed-off-by: Greg Meiste <w30289@motorola.com>
Colin Cross [Sat, 29 May 2010 01:00:48 +0000 (18:00 -0700)]
misc: kxtf9: Fix printk
Change-Id: Ic453c35f4ebc76d19a3dab6f887b597898204196
Signed-off-by: Colin Cross <ccross@android.com>
Dan Murphy [Fri, 28 May 2010 13:56:43 +0000 (08:56 -0500)]
[ARM] tegra: stingray: Add gyroscope board file data
Adding the gyroscope board file data
Change-Id: I54f076f6e3f3331755a204454c9539ba6f031156
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Fri, 28 May 2010 13:58:04 +0000 (08:58 -0500)]
[ARM] tegra: stingray: Add gyroscope to defconfig
Change-Id: I24bef765a802ed6e19195449e5dfcea4fb12abf2
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Fri, 28 May 2010 13:53:37 +0000 (08:53 -0500)]
misc: Add ST Micro L3G4200D Gyroscope code
This is the initial submission of code for the gyroscope.
Change-Id: Ie56f79dad42b616058ea59cf05508337cc002f18
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Fri, 28 May 2010 18:06:14 +0000 (13:06 -0500)]
[ARM] tegra: stingray: Clean up the sensors board file
Uncomment the regulator code and add if NULL checks
Also fix some white space issues
Change-Id: I19fb2cbf1b2f2f3d2173a479ab543ed8b1f93dad
Signed-off-by: Dan Murphy <wldm10@motorola.com>
James Wylder [Thu, 27 May 2010 23:01:04 +0000 (16:01 -0700)]
[ARM] tegra: stingray: register pm_power_off function
Change-Id: I9d0cd40c1070b6c88418e2f983c2e4013a5a9f75
Signed-off-by: James Wylder <james.wylder@motorola.com>
Dan Murphy [Thu, 27 May 2010 18:43:06 +0000 (13:43 -0500)]
[ARM] tegra: stingray: Add Home key LED to board files
Change-Id: I0beb327530618196c613a1c1aaa4ae085885336e
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Thu, 27 May 2010 18:44:02 +0000 (13:44 -0500)]
[ARM] tegra: stingray: Enable CPCAP LEDs in defconfig
Change-Id: I0385e2a997790e33f1dc7141cc74cd3e353278df
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Thu, 27 May 2010 18:41:02 +0000 (13:41 -0500)]
leds: CPCAP LED driver initial submission
Initial submission of the Home key LED code.
Code was ported from Sholes and updated with a work queue
Change-Id: Ib25313471cd21fb941b8fa4ecab3811b6ef35d74
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Greg Meiste [Wed, 26 May 2010 21:19:20 +0000 (16:19 -0500)]
tegra: stingray: Changes for Whisper 0.4
Change-Id: I55f0c1e6cad26c6386dfb8cc6224720965b4598e
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Wed, 26 May 2010 21:18:47 +0000 (16:18 -0500)]
mfd: cpcap-whisper: Changes for version 0.4
Whisper detection changes for version 0.4, enabling Whisper proto board
to be detected. Now reporting dock type to system.
Change-Id: I22e9704a33afc0afcd02eb68fcb40c87b9b3e3fc
Signed-off-by: Greg Meiste <w30289@motorola.com>
Rebecca Schultz Zavin [Thu, 27 May 2010 19:18:57 +0000 (12:18 -0700)]
[ARM] tegra: stingray: Add SPI board file
Initial submission of Stingray SPI board file.
Change-Id: Iab0968bff87bde4acaf9a46f3a35ec3e39243634
Signed-off-by: Greg Meiste <w30289@motorola.com>
Dan Murphy [Wed, 26 May 2010 20:03:03 +0000 (15:03 -0500)]
[ARM] tegra: stingray: Add MAX9635 to defconfig
Change-Id: I06e8fc379e373ed5df01923e88a82a384cfc5311
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Wed, 26 May 2010 20:00:30 +0000 (15:00 -0500)]
[ARM] tegra: stingray: Add MAX9635 to board file
Change-Id: Ie7ca7819aa8daf2696b1242b05f7147318f6c902
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Wed, 26 May 2010 19:56:47 +0000 (14:56 -0500)]
misc: Initial MAX9635 ALS driver
The MAXIM 9635 IC is used for ALS sensing. This will report ambient
light data in LUX.
Change-Id: I93728eb804d748145fb17524cfd328c923f33eb3
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Rebecca Schultz Zavin [Wed, 26 May 2010 21:46:49 +0000 (14:46 -0700)]
[ARM] tegra: Stingray: Add touch board file.
Touch board has platform data with config parameters for mxt1386.
i2c board file touch contents moved to touch board file.
Change-Id: I3f8df54f5a7c32de2d63a3d4b0c796c2a8e4ca3c
Signed-off-by: Makarand Karvekar <makarand.karvekar@motorola.com>
Makarand Karvekar [Thu, 20 May 2010 22:45:34 +0000 (17:45 -0500)]
[ARM] tegra: Olympus: i2c board file updated for touch.
Touch platform data updated for newer touch firmware and
new object elements.
Change-Id: Ib5b6d4d495e0f94c21fbb236ed0526a9819b1683
Signed-off-by: Makarand Karvekar <makarand.karvekar@motorola.com>
Makarand Karvekar [Thu, 20 May 2010 18:14:21 +0000 (13:14 -0500)]
touch: qtouch obp mxt1386 support
Driver has firmware flashing capability.
updated to firmware 07_E0.
Change-Id: Id3d4861fcc05fd171feffb43d013bef6fe19f906
Signed-off-by: Makarand Karvekar <makarand.karvekar@motorola.com>
Dan Murphy [Tue, 25 May 2010 14:13:51 +0000 (09:13 -0500)]
[ARM] tegra: stingray: Add KXTF9 defconfig flag
Change-Id: Ifec55c3a84dd80763490f1bbcf66f1a1d134c4c4
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 25 May 2010 14:12:55 +0000 (09:12 -0500)]
[ARM] tegra: stingray: Add KXTF9 data to sensor board file
Change-Id: I583d1fb2ae20262c3ee9f0d6d9adb36d9f99bc70
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 25 May 2010 14:10:06 +0000 (09:10 -0500)]
misc: KXTF9 Accelerometer driver
Open source driver modified to work on K34.
Resolved open coding violations
Ensured no data would be reported if the device is not enabled
Change-Id: Ia23393a702dc193835313844260ccd1fd5b93cc0
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dmitry Shmidt [Mon, 24 May 2010 18:14:59 +0000 (11:14 -0700)]
[ARM] tegra: stingray: Add bcm4329 module compilation
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Dmitry Shmidt [Fri, 21 May 2010 22:02:50 +0000 (15:02 -0700)]
[ARM] terga: stingray: Add wlan nvs export support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Greg Meiste [Fri, 21 May 2010 21:32:36 +0000 (16:32 -0500)]
[ARM] tegra: stingray: Add bq24617 charger support
Change-Id: I4e6975abe03b4abdb7077c438d15bf0e4e6c4dae
Signed-off-by: Greg Meiste <w30289@motorola.com>
Colin Cross [Fri, 21 May 2010 22:14:42 +0000 (15:14 -0700)]
[ARM] tegra: stingray_defconfig: Add bq24617 charger
Change-Id: I7efe788659b22f27f8132ad238ebaf6f0882213d
Signed-off-by: Colin Cross <ccross@android.com>
Greg Meiste [Fri, 21 May 2010 19:30:51 +0000 (14:30 -0500)]
power: bq24617: Add bq24617 charger driver
Initial implementation of bq24617 charger driver.
Change-Id: Ia2c809712357679caf526d427c9c094211073635
Signed-off-by: Greg Meiste <w30289@motorola.com>
Rebecca Schultz Zavin [Thu, 20 May 2010 01:01:13 +0000 (18:01 -0700)]
[ARM] stingray: Add cpcap to defconfig
Change-Id: If53853116131441cc5983c6ffa60224d470e6ab3
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Greg Meiste [Thu, 13 May 2010 22:04:35 +0000 (17:04 -0500)]
mfd: cpcap: Add CPCAP drivers
Add driver for motorola's CPCAP PMIC. This includes the core in mfd,
the rtc driver, and regulator drivers.
Change-Id: I96e3a97673002f3264ae8a71f5c8db1fcb7846e3
Signed-off-by: Greg Meiste <w30289@motorola.com>
Dan Murphy [Thu, 20 May 2010 20:38:33 +0000 (15:38 -0500)]
[ARM] tegra: stingray: Add backlight to the panel board file
The current display is GPIO driven for the display backlight.
There will be newer displays that will no longer need this mechanism.
This code can be tagged for future removal
Change-Id: Id8d9fc7699172e7a8bbfd889302af76b6a370a11
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Thu, 20 May 2010 20:34:49 +0000 (15:34 -0500)]
[ARM] tegra: stingray_defconfig: Enable backlight LED driver
Enable the LED_CLASS, NEW_CLASS and the AUO_LCD config flags
Change-Id: Ic63b946aee62445b28626975247500ff801165db
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Tue, 18 May 2010 18:20:22 +0000 (13:20 -0500)]
leds: Simple GPIO driver to control the AUO backlight
This is a simple driver that controls the AUO backlight and
registers to the LED class driver.
This code is not long term code. Once new displays are available
this code can be disabled and removed.
Change-Id: I91f4fdfe25060440643597f5419f67a87ef72a96
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Thu, 20 May 2010 20:41:05 +0000 (15:41 -0500)]
[ARM] tegra: stingray: Initial sensor board file for stingray
Initial submission of the sensor board file with barometer intialization.
Change-Id: I04316eb26f53bbdc0306bb3a8a74f6d17e03ae88
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Dan Murphy [Thu, 20 May 2010 20:29:02 +0000 (15:29 -0500)]
[ARM] tegra: stingray_defconfig: Enable the BMP085 barometer driver
Add config flag to turn on the barometer driver
Change-Id: I71d02eb5ec44321c8258d0b1e9eb7213ce608338
Signed-off-by: Dan Murphy <wldm10@motorola.com>
Colin Cross [Tue, 18 May 2010 20:49:29 +0000 (13:49 -0700)]
[ARM] tegra: stingray: keypad: Update keycodes
Change-Id: I2c171ce74afe46fa1e3980aa147c65b95f17c3ad
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 19 May 2010 21:27:10 +0000 (14:27 -0700)]
[ARM] tegra: stingray: Add drive strength table
Signed-off-by: Colin Cross <ccross@android.com>
Change-Id: Ia37ea49f177fd3398b19a81b51054fc295dc0aec
Colin Cross [Thu, 13 May 2010 23:43:53 +0000 (16:43 -0700)]
[ARM] tegra: stingray: Make board init calls explicit
Change-Id: Id8e8a813d1a65babec791d188263caa168b9f8e3
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 13 May 2010 23:43:26 +0000 (16:43 -0700)]
[ARM] tegra: olympus: Make board init calls explicit
Signed-off-by: Colin Cross <ccross@android.com>
Change-Id: I1ca16a8cf76f324937e47ce057123d2f28fd20b8
Dmitry Shmidt [Tue, 18 May 2010 19:10:43 +0000 (12:10 -0700)]
[ARM] tegra: stingray: Add stingray_defconfig
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Dmitry Shmidt [Tue, 18 May 2010 17:53:41 +0000 (10:53 -0700)]
[ARM] tegra: stingray: Fix wlan support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Colin Cross [Thu, 13 May 2010 21:03:59 +0000 (14:03 -0700)]
[ARM] tegra: stingray: Update board files for stingray
Change-Id: I6433bce8bb1cee03a50d1df96a3edd1d2a5d95da
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 13 May 2010 20:51:58 +0000 (13:51 -0700)]
[ARM] tegra: stingray: Initial stingray board files
Change-Id: I644ea9bfe0d256fadfac6e129c9d64cae7982c0b
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 13 May 2010 21:16:01 +0000 (14:16 -0700)]
[ARM] tegra: olympus: Make local structures static
Change-Id: I57088f9ec4cd5ccbbd343018049f9cfbb11d4add
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 11 May 2010 01:39:50 +0000 (18:39 -0700)]
[ARM] tegra: olympus: Use clock init tables
Change-Id: I22259fdf14b18e05160d1b8152de14a72f1598d2
Signed-off-by: Colin Cross <ccross@android.com>
Dmitry Shmidt [Wed, 12 May 2010 21:44:10 +0000 (14:44 -0700)]
drivers: mmc: tegra: Add fake card detect support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Dmitry Shmidt [Wed, 12 May 2010 00:28:51 +0000 (17:28 -0700)]
[ARM] tegra: olympus: Add Wlan platform support
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Colin Cross [Sat, 24 Apr 2010 03:15:13 +0000 (20:15 -0700)]
[ARM] tegra: olympus: Initialize pll_p_out* on boot
Change-Id: I380e2a5bb0cfe2ed9123fbc451398597c65e0b03
Signed-off-by: Colin Cross <ccross@android.com>
Erik Gilling [Wed, 31 Mar 2010 20:48:13 +0000 (13:48 -0700)]
[ARM] tegra: move olympus to use generic devices.c for i2c and sdhci
Signed-off-by: Erik Gilling <konkers@android.com>
Colin Cross [Fri, 9 Apr 2010 21:54:30 +0000 (14:54 -0700)]
[ARM] tegra: olympus: update olympus_defconfig
Change-Id: Ia4467171c83e4e608ec54efb5ee0781d8f55ceaf
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 9 Apr 2010 21:38:44 +0000 (14:38 -0700)]
[ARM] tegra: olympus: Enable all SD busses
Change-Id: Ic747f83a4eb84a04f7439f520a815fbe1f6ae50d
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 7 Apr 2010 20:00:33 +0000 (13:00 -0700)]
[ARM] tegra: olympus: Add test hsuart
Change-Id: I05243c0cb27b9176d9add6e4b2007f92d92a55eb
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Fri, 26 Mar 2010 01:59:06 +0000 (18:59 -0700)]
[ARM] tegra: olympus: Add keypad
Change-Id: I7ea2f8a1b7e14c31107621cbdbde3ab84546784f
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 25 Mar 2010 05:21:03 +0000 (22:21 -0700)]
[ARM] tegra: olympus: Add olympus_defconfig
Change-Id: Ib1f6624d9ddaec41bd6a4c52f5bb24bad9ca0464
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 15 Apr 2010 22:23:09 +0000 (15:23 -0700)]
qtouch: Fix slab.h includes for 2.6.34-rc4
Change-Id: I2da10ee5a45f5e29a39b23a9f0352ffa3d260b5e
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 25 Mar 2010 05:19:49 +0000 (22:19 -0700)]
qtouch_obp_ts: Add support for X and Y flip
Change-Id: I463ad7bfc906eedb8f80fededdbd12a24b77ab1a
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Wed, 24 Mar 2010 00:42:59 +0000 (17:42 -0700)]
[ARM] tegra: olympus: Add sholes touchscreen device to olympus board
Signed-off-by: Colin Cross <ccross@android.com>
Dima Zavin [Thu, 23 Apr 2009 23:06:51 +0000 (16:06 -0700)]
input: Add Quantum OBP touchscreen support
This adds a driver for the Quantum capacitive touch controllers
that use the Object Based Protocol (OBP) for communication
between the driver and the on-chip firmware.
Change-Id: Ib469d626d5f0d11562547f2cbeb71a48e11f6072
Cc: Dan Murphy <D.Murphy@motorola.com>
Cc: Mike Chan <mike@android.com>
Cc: Paul Eastham <eastham@google.com>
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Colin Cross [Mon, 22 Mar 2010 03:51:38 +0000 (20:51 -0700)]
[ARM] tegra: olympus: Add i2c to board olympus
Change-Id: I627eccac1a5557f5264946caad2384c7f2038ef5
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 18 Mar 2010 23:10:44 +0000 (16:10 -0700)]
[ARM] tegra: olympus: Modify uncompress.h for olympus
Change-Id: Ib4379eb677cf504dad50b23df3763619956a980e
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 18 Mar 2010 23:09:45 +0000 (16:09 -0700)]
[ARM] tegra: olympus: Add olympus board files to build
Change-Id: I9e9af1d4fd0f0551251b6b491e7ce303475968a5
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Thu, 18 Mar 2010 23:09:24 +0000 (16:09 -0700)]
[ARM] tegra: olympus: Add olympus board files
Signed-off-by: Colin Cross <ccross@android.com>
Boris Bekkerman [Tue, 3 Aug 2010 01:38:55 +0000 (20:38 -0500)]
fixes calculation error when processing large partition sizes
Change-Id: I193b89c97d607456edf64e96cb4614d9c92ff095
Signed-off-by: Boris Bekkerman <boris.bekkerman@motorola.com>
projects / firefly-linux-kernel-4.4.55.git / log