arm64: dts: rockchip: add usb camera pd pin control for rk3399-tve1205g

Change-Id: Iee039f3085832861dee5a99da2cbbbec2a08f509
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

arm64: rockchip_defconfig: add usb camera pd pin control support

Change-Id: If7542a913eab0e36c586005d5bcfbb2b9cabb5d7
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

misc: add usb camera pd pin control driver

Change-Id: Id6ad835c2fff43167a52f90c19e7e6dfe93a4655
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

ASoC: rockchip: i2s: add support for i2s bclk fs configuration

this patch add support for i2s bclk fs configuration, we can
configure bclk_fs by devicetree as required.

Change-Id: I7e034e0466793b5b9eab6566a43e90213f219bb0
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

video: rockchip: dp: fix dp connected issue which caused by hpd signal.

some device will triggered hpd after dp is connected, so we don't do
traning if dp lanes is not changed.

Change-Id: I3e329e7d2db33138f283ad6584b966ebd0619f65
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

usb: dwc3: rockchip: support to set testmodes via debugfs

This patch create host_testmode file in debugfs for
USB HOST. It's useful for us to use a scope to verify
signal integrity for USB2/USB3 HOST.

For example， set testmodes for RK3399 board USB:
1. set Test packet for Type-C0 USB2 HOST:
   echo test_packet > /sys/kernel/debug/usb@fe800000/host_testmode

2. set compliance mode for Type-C0 USB3 HOST normal orientation:
   echo test_u3 > /sys/kernel/debug/usb@fe800000/host_testmode

3. set compliance mode for Type-C0 USB3 HOST flip orientation:
   echo test_flip_u3 > /sys/kernel/debug/usb@fe800000/host_testmode

4. check the testmode status:
   cat /sys/kernel/debug/usb@fe800000/host_testmode

   The log maybe like this:
   U2: test_packet     /* means that U2 in test mode */
   U3: compliance mode /* means that U3 in test mode */

Change-Id: Ic7e464b0443c792848846246b782ffba30bf2120
Signed-off-by: William Wu <wulf@rock-chips.com>

PM / AVS: rockchip-cpu-avs: use a new way to get cluster id

The returned value of topology_physical_package_id is socket id
on ARM32 system(for example, RK3288), it's not like the cluster id
on ARM64 system(for example, RK3366), so use a new way.

Change-Id: I5b2cdfdcdaa56c71df394caa2588f6e83931a293
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

UPSTREAM: cpufreq: Send START policy notification after sending CREATE

The sequence got a bit wrong as we are sending CPUFREQ_START
notifications even before we have sent CPUFREQ_CREATE_POLICY.

Fix it.

Change-Id: I7d1fba317314bb5e5601b1354494398def156424
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
(cherry picked from commit 388612baba201bdcedfa66782f524dcc507d9f12)

arm64: dts: rockchip: rk3366: add cpu avs node

Change-Id: I7d984bf44e04d205c243eb2012cd06ba7c7fe548
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

ARM64: dts: rk3399-tve1205g: host state notify ec module through gpio

Change-Id: I3716de0618394de010000a0497de1b3c83cd88ab
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

power: host state notify ec module through gpio

Change-Id: I6b1401c6959a05fce1d6d7ca7a5fb581782fd30d
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

mfd: fusb302: fix fusb302 disconnect error.

shift the time of vbus enable before attach debounce started,
and merge the code of get_cc from chrome ec driver, which used
to fix connection disconnected issue.

Change-Id: I2fd1f83d0265b3770d75a59d622d0f650d737c5b
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

net: rkwifi: enable GET_CUSTOM_MAC_ENABLE

Change-Id: I8ea15be317e4bbe1d9cf0834e42536fc4dc4b9d7
Signed-off-by: huweiguo <hwg@rock-chips.com>

arm64: dts: rockchip: rk3399: Rename OPP nodes as opp@<opp-hz>

It would be better to name OPP nodes as opp@<opp-hz> as that will ensure
that multiple DT nodes don't contain the same frequency. Of course we
expect the writer to name the node with its opp-hz frequency and not any
other frequency.

And that will let the compile error out if multiple nodes are using the
same opp-hz frequency.

Change-Id: I8c77646329e39390fb135d4d75d34893a8168876
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rk3399: modify opp table according to latest chips

Change-Id: I2a1b5fac74617cf57a5655411f0326800a6a990d
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rockchip: support use drm on rk3399 excavator linux

1. fixup edp enable gpio.
2. add backlight enable gpio.
3. enable route_edp node.

Change-Id: I4b4792abe3c8eb7dba0c2f5c0d3ddffff74478d1
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

arm64: dts: rk3399_linux: support use drm on rk3399 linux

Change-Id: I9b248af7d86d34a669219fbe62a195ee2b49e516
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

net: rfkill-wlan: prior to use wifi addr store in vendor storage

Change-Id: I32ef43e1f47ee658675b26d54fa834ae9362382f
Signed-off-by: huweiguo <hwg@rock-chips.com>

ARM64: dts: rockchip: add power domain node for RK3328 Soc

add pd node for RK3328 Soc
create power domain tree

Change-Id: I0ef5729d397105a7992cb4b7440cdc2b251bd1af
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

arm64: dts: rk3399-android: add core reset for dp.

Change-Id: I7c86cfbf28cb278bcadebbb08ba31a8b81bdd290
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

video: rockchip: dp: fix dp fw load error.

Do dptx/apb/core reset on every dp clock enabling, otherwise dp
will fail to load the firmware sometimes.

Change-Id: Ied0caad99d865ec86162dead2b4769a53f8db12a
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

arm64: dts: rockchip: support use vpu on rk3399 excavator linux

Change-Id: I5ea28cd4539140a149f1725a1622fd1dcae3e020
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

drm/rockchip: gem: add mutex lock for drm mm

drm_mm_insert_node_generic and drm_mm_remove_node may access same
resource with list ops, it's not threads safe, so protect this context
with mutex lock.

Fix bug:
[49451.856244] ==================================================================
[49451.856350] BUG: KASAN: wild-memory-access on address dead000000000108
[49451.856379] Write of size 8 by task Binder:218_4/683
[49451.856417] CPU: 2 PID: 683 Comm: Binder:218_4 Not tainted 4.4.36 #62
[49451.856443] Hardware name: Rockchip RK3399 Excavator Board edp (Android) (DT)
[49451.856469] Call trace:
[49451.856519] [<ffffff900808a9d0>] dump_backtrace+0x0/0x230
[49451.856556] [<ffffff900808ac14>] show_stack+0x14/0x1c
[49451.856592] [<ffffff90084a4de0>] dump_stack+0xa0/0xc8
[49451.856633] [<ffffff900821b700>] kasan_report+0x110/0x4dc
[49451.856670] [<ffffff900821aa84>] __asan_store8+0x24/0x7c
[49451.856715] [<ffffff90086158c4>] drm_mm_insert_node_generic+0x2dc/0x464
[49451.856760] [<ffffff90086406a8>] rockchip_gem_iommu_map+0x60/0x158
[49451.856794] [<ffffff9008640bb4>] rockchip_gem_create_object+0x278/0x488
[49451.856827] [<ffffff9008641020>] rockchip_gem_create_with_handle+0x24/0x10c
[49451.856862] [<ffffff9008641364>] rockchip_gem_create_ioctl+0x3c/0x50
[49451.856896] [<ffffff900860aee4>] drm_ioctl+0x354/0x52c
[49451.856939] [<ffffff900823d948>] do_vfs_ioctl+0x670/0x78c
[49451.856976] [<ffffff900823dac4>] SyS_ioctl+0x60/0x88
[49451.857009] [<ffffff9008082ef0>] el0_svc_naked+0x24/0x28

Change-Id: I2ea377aa9ca24f70c59e2d86f2a6ad5ccb9c0891
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

ARM64: dts: rk3399-tve1205g: add wakeup support for hid keyboard

Change-Id: I21d0f6dac30f64b90c68f98c11c0cc7012e2b1b6
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

HID: i2c-hid: add support wakeup

Change-Id: I15890509ff5983e1a8adaa48b28391ec67de8bb5
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

ethernet: rockchip: get and save eth addr in vendor storage

Change-Id: I83d8bc81ca8d33e6f2575d0d90a3dc5978500a64
Signed-off-by: huweiguo <hwg@rock-chips.com>

input: keyboard: rk_keys: add rk_keys.h

Make sure drivers work if rk_keys do not selected.

Change-Id: I2882e6c69f0ddbff54089f824be33964ded3cb2e
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

rk: rm drivers/clk/rk

Change-Id: I8c541c0edb446a285ca5097b597216635e755460
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

camera: rockchip: camsys driver v0.0x21.9

Change-Id: I371f3bfc1e6276407bb9481f4a7897d4955903ba
Signed-off-by: dalong.zhang <dalon.zhang@rock-chips.com>

soc: rockchip: reboot-mode: rename BOOT_LOADER to BOOT_BL_DOWNLOAD

Same as upstream.

Change-Id: Id9042d288bdbac2fede7da4aee13cc7a32609d6d
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: dts: rockchip: move vpu/rkvdec to rk3399.dtsi

Right now only one driver support vpu and rkvdec,
so move the nodes from rk3399-android[-next].dtsi to rk3399.dtsi.

Change-Id: Id908843774ed8eede3aeddb24059ae92a35e5b98
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: rockchip_defconfig: enable EC_BATTERY

Change-Id: I7f467608e6d366b8839dc171ad98c928fe3ed788
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

soc: rockchip: power-domain: Modify power domain driver for rk3328

This driver is modified to support RK3328 SoC.
RK3328 SoC is only support idle.
add DOMAIN_M type, for support regs have write_enable bit.

Change-Id: I5780b7bab680ddd9d9480e19d7c49681dd571d27
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

dt-bindings: add binding for rk3328 power domains

Add binding documentation for the power domains
found on Rockchip RK3328 SoCs.
But RK3328 SoC just support idle, not support pd.

Change-Id: I331680b2e91a45fd09f4bdab7ff9fd3990cb35c4
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

dt/bindings: power: add RK3328 SoCs header for idle-request

According to a description from TRM, add all the idle request.

Change-Id: Ia2fdb20d89f7e668a3c86074ebed8c73ab0a9429
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

power: add ec battery driver

Change-Id: I7b1b0087a9ec361ec322a34b4caefc71a51bd2c9
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

drivers: soc: rockchip: fix vendor storage write issue

Change-Id: I65bf5896ac8cf792c400755fc62e3e433209891d
Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>

ARM64: dts: rk3399-tve1205g: add leds gpio control

Change-Id: I89b0c1a2ee631b133f81494063b6cb4a57a1daca
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

soc: rockchip: rename rockchip_boot-mode.h to rockchip,boot-mode.h

Same as upstream.

Change-Id: Ic1887e5cf808ebf214168b51683dec25880f0dac
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ASoC: es8316: fix null pointer error

due to function will be called from rk_headset_irq_hook_adc.c
when es8316 configured in defconfig file but not in device tree

Change-Id: Ie0294fff2c05b9f77c6740d81dc9445007c1b62b
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

arm64: rockchip_defconfig: enable cx2072x

Change-Id: If2aaec6ffd360033f911ac2e5e2d3bd575dfdcb1
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

NVMe: don't try to read csts when failing to reset it

We could find the external abort for trying to access
nvme's BAR space to check the csts, but it's possible
that the link state is forbidden to access the BAR when
failing to reset it. So we should reuse the former csts
to print the log instead of doing that again.

Change-Id: I34438a726381e588eb21149b1aab76a66ef0e665
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

usb: dwc3: redo the mode setting at core init

When dwc3 core enters into suspend mode, the PD may turn off
for power saving, which will cause dwc3 controller lost the
mode operation when resuming time.

This adds redo the mode setting into dwc3_core_init() function
to avoid this issue.

BUG=Redmine: Defect#110481
TEST=rk3399-sapphire-excavator-box(CVTE), check if USB3.0 HUB
can be enumerated after PM resume.

Change-Id: I61c512e9c368afc665cd4d5900367079ed22a34e
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

phy: rockchip-inno-usb2: rm phy_power_on/off in suspend/resume cases.

Usb-controller can invoke phy_power_on/off in its suspend/resume
process, so usb-phy need not do it again.

This adds remove phy_power_on/off in its suspend/resume cases.

Change-Id: Ice30e79ffba8116ca9bfae344c7ea232f6580130
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

usb: dwc3: rockchip: power off usb2 phy in suspend

DWC3 use extcon notifier to manage USB cable detection
and mode switch. For host mode, if USB device connected,
it requires to reset the whole DWC3 controller to make
sure that pipe power state in P2 before power on USB3 PHY,
after do DWC3 reset we will do phy power on in extcon evt
work, however, the DWC3 core will do phy power on again
in runtime resume process (dwc3_runtime_resume() ->
dwc3_core_init() -> phy_power_on()). This will cause PHY
power off failure during suspend because we just do once
phy power off in suspend(dwc3_suspend() -> dwc3_core_exit()
-> phy_power_off()).

This patch does phy power off in suspend to make sure that
USB2 PHY enter suspend in HOST mode. And because USB3 PHY
power on operation need to be done while the pipe is in P2
state, but after resume the pipe is in P0 state, so we just
put USB3 PHY in power on state.

Change-Id: I643ba0abeb015be9285fd29d59fa0e006131c39b
Signed-off-by: William Wu <wulf@rock-chips.com>

arm64: dts: rockchip: keep vbus always on for usb2.0 host of rk3399

One basic condition of usb remote wakeup is vbus on, so we add
regulator-always-on property for vcc5v0_host regulator in this adds.

In the previous codes, ehci/ohci-platform did not power off
vcc5v0_host regulator due to some oddish codes, and we have fixed it
at commit b5a0a9e8794d.

Change-Id: I95c225c9c3aeec6e346d62e61fdcde5e5e02d143
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

arm64: rockchip_cros_defconfig: enable Type-C PHY and DP config

Change-Id: Iac8930ad5c229e385889fa8b042973730a5aea2b
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

ASoC: Add driver for codec cx2072x

Change-Id: I9a0eb611a4e0d861b7d47d4944b93203f823738b
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

arm64: dts: rockchip: modify logo-mode as center for rk3399 mid

Change-Id: I529a1063efd6475d49f6eb738e4612cfb711ced1
Signed-off-by: Hao Xiaowei <hxw@rock-chips.com>

video: rockchip: vcodec: add log message in iommu drm

Change-Id: If66e7654d87c790977378630824d582f2f4c4ffa
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

video: rockchip: vcodec: add buffer recycle mechanism in vpu

when info change, vpu driver doesn't know when to release
buffers. with this mechanism, vpu driver will auto release
when buffer nums bigger than BUFFER_LIST_MAX_NUMS.

Change-Id: Id4fb91257d260bfd2e18388731941c4f0cc191b0
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

video: rockchip: vcodec: fix fd import error

Since fd will be reused even if dma buffer doesn't release,
this will cause output buffer error when use usb camera
with mjpeg or h264 format.

Change-Id: I2baeb2c5d9127df0a0eb362b8c577c05ceca470d
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>

arm64: dts: rockchip: enable cdn-dp for rk3399-evb-cros

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Change-Id: I7f86533a5890edd1fc113bf9553764ab3dee7640

UPSTREAM: ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle

when step into runtime_suspend, i2s pd will be disabled and loss state.
so need to restore register when runtime_resume.

Change-Id: Ie37aba46f6ee21be2af404da24ba667e3ca86d6c
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
(cherry picked from git.kernel.org broonie/sound.git topic/rockchip
 commit f0447f6cbb202e1be8244d15aee390a96d65e490)

arm64: dts: rockchip: add cdn-dp node for rk3399

Add a node for the cdn DP controller which is embedded in the rk3399
SoC.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Change-Id: I253bb9b9d6c1b8a407f7c49503ec666bb8b64d4d

drm/rockchip: cdn-dp: add hdmi-codec jack event

Use HDMI connection / disconnection notifications to update an ALSA
jack object.

Change-Id: Ia18537be1ddb899b7ac490560bf91d7de83eae02
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

FROMLIST: ASoC: hdmi-codec: Use HDMI notifications to add jack support

Use HDMI connection / disconnection notifications to update an ALSA
jack object. Also make a copy of the ELD block after every change.

Conflicts:
sound/soc/codecs/Kconfig
sound/soc/codecs/hdmi-codec.c

(am from https://patchwork.kernel.org/patch/8887251/)
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Change-Id: I5f4a931c3b91c2b230ce5a61b60f191628d93105

FROMLIST: video: rmk's HDMI notification prototype

This is Russell's HDMI notification prototype [1], currently waiting
for the HDMI CEC situation to resolve.

The use case for the notifications on MediaTek MT8173 is to let the
(dis)connection notifications control an ALSA jack object.

No Signed-off-by since this is not my code, and still up for discussion.

[1] https://patchwork.kernel.org/patch/8351501/

(am from https://patchwork.kernel.org/patch/8887261/)

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Change-Id: I87daa156de6cfa7ff8db9df9d8ecc8c42d76798f

FROMLIST: drm/rockchip: cdn-dp: Do not run worker while suspended

If the driver is in suspended mode, the dp block may be disabled, and
chip registers may not be accessible. Yet, the worker may be triggered
in this situation by an extcon event. If that happens, the following crash
will be seen.

cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] *ERROR* Enable dp failed -19
cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Connected, not enabled. Enabling cdn
Bad mode in Error handler detected, code 0xbf000002 -- SError
CPU: 1 PID: 10357 Comm: kworker/1:2 Not tainted 4.4.21-05903-ge0514ea #1
Hardware name: Google Kevin (DT)
Workqueue: events cdn_dp_pd_event_work
task: ffffffc0cda67080 ti: ffffffc0b9b80000 task.ti: ffffffc0b9b80000
PC is at cdn_dp_clock_reset+0x30/0xa8
LR is at cdn_dp_enable+0x1e0/0x69c
...
Call trace:
[<ffffffc0005a7e24>] cdn_dp_pd_event_work+0x58/0x3f4
[<ffffffc0002397f0>] process_one_work+0x240/0x424
[<ffffffc00023a28c>] worker_thread+0x2fc/0x424
[<ffffffc00023f5fc>] kthread+0x10c/0x114
[<ffffffc000203dd0>] ret_from_fork+0x10/0x40

Problem is two-fold: The worker should not run while suspended, and the
suspend function should not call cdn_dp_disable() while the worker is
running.

Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
(am from https://patchwork.kernel.org/patch/9442149)
Change-Id: Ic01c6f793281a47c36a90c1be34a5e479ebabb3e

FROMLIST: drm/rockchip: cdn-dp: Load firmware if no monitor connected

If no monitor is connected, suspend/resume cycles result in firmware
load errors because the driver attempts to load the firmware while
the system is in suspend state. This results in a kernel warning and
traceback.

Loading the firmware during boot fixes the problem. Note that we can not
just call schedule_work conditionally in cdn_dp_pd_event() if the insertion
status changed. The problem would still be seen if a monitor is connected
for the first time during suspend.

(am from https://patchwork.kernel.org/patch/9442145)
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Change-Id: I86eb7c41624be1a8f5952ba7709e623a70941b8c

drm/rockchip: cdn-dp: fix some error

This commit is for fixing some error, according to the comments from
CL:5442
1. correct the use of rate
2. remove the phy switch from DP driver, it is controlled in PHY driver
3. add some const keyword
4. clear int_mask to 0
5. modify spelling errors

Change-Id: I239a9e7183593b85485abb6d288d6cb1558c65f7
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

FROMLIST: drm/rockchip: cdn-dp: add cdn DP support for rk3399

Add support for cdn DP controller which is embedded in the rk3399
SoCs. The DP is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work,
please put the firmware file to /lib/firmware/rockchip/dptx.bin. The
uCPU in charge of aux communication and link training, the host use
mailbox to communicate with the ucpu.
The dclk pin_pol of vop must not be invert for DP.

Change-Id: I64aee564f782db9943a92ca07cb20e2111d7921f
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
[seanpaul fixed up some races between the worker and modeset]
[seanpaul squashed ~15 commits from chromium.org gerrit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[groeck fixed compilation errors when building as module]
Signed-off-by: Guenter Roeck <groeck@chromium.org>
(am from https://patchwork.kernel.org/patch/9442143)

video: rockchip: dp: modify get edid method and modify get dpcd retry times.

Change-Id: I69c7b91b78707b40126f2366f28ff6256eabe4fb
Signed-off-by: wjh <wjh@rock-chips.com>

video: vcodec: fix warning when enable ion in arm32

Change-Id: Ia409365aa780badbaa64539ebc3d5679dda49a7a
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: rockchip: add allocator type inside vpu & hevc for rk3288-linux

Change-Id: I6e9a72fb287f963be78c4dc6f375fa12991394f2
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

ARM: configs: enable vcodec driver for rockchip linux

Change-Id: I5533054d9fdde1d7700f127ce4b6248d709f7588
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: rockchip: switch to vpu-service in rk3288 linux boards

We decide to back to old vcodec driver until getting a better v4l2 solution

Change-Id: Iec3f5b3aba86866a0b0fc7aab5b6c2b28bc268d9
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: enable rga for rk3288 linux boards

we will use rga to speed xserver and wayland.

Change-Id: Ic975b1bbeb6afd8a3a15ba41afc1d8ff10c6d3b4
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: rk3288: add drm rga node

Change-Id: I3c88a695922d3e2245d6b406860db97de9d47244
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: correct rk3288-evb gmac node

remove repetition

Change-Id: I1140ce9cbf259eb827b7e2aa03a2e263e81735ea
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm64: dts: rockchip: add mmc dt-bindings for rk3328 and evb board

Add dt-bindings for sdio/sdmmc(+ext)/emmc controllers

Change-Id: I1c52b803110c499c58c2c27a1c7488a98b0ca870
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

UPSTREAM: drm: Introduce DRM_DEV_* log messages

This patch consolidates all the various log functions/macros into
one uber function, drm_log. It also introduces some new DRM_DEV_*
variants that print the device name to delineate multiple devices
of the same type.

Change-Id: Ic213cce1d775cc7b820473ee5263458a001f9558
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1471303084-3757-1-git-send-email-seanpaul@chromium.org
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit c4e68a5832021cf8c2f9a2f3419452470ca60bd8)

UPSTREAM: drm: Add ratelimited versions of the DRM_DEBUG* macros

There's a couple of places where this would be useful for drivers (such
as reporting DP aux transaction timeouts).

Change-Id: I027648bacec5e23890f6743207d66858f91c05df
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-7-git-send-email-cpaul@redhat.com
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 27528c667a210845b35a1f49c810dba469bced52)

ARM64: dts: rk3399: add bq25700 support for tve1205g

Change-Id: I74119a51d2557e86f3c579645db2b2b8dc71989c
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

arm64: rockchip_defconfig: enable bq25700

Change-Id: I96edac95110516c6f6747128fd50251cb3e37e7b
Signed-off-by: Shengfei xu <xsf@rock-chips.com>

usb: ehci/ohci-platform: assigned hcd phy phandle at platform probe

In ehci/ohci-platform, phy_power_on() gets called twice at probe time,
one is at pdata->power_on(); another is in usb_add_hcd(). However,
phy_power_off() is only invoked one time when ehci/ohci-platform goes
to PM suspend. As a result, the phy power count become inconsistent.

This adds assigned phy phandle to hcd-phy at ehci/ohci-platform probe
time to prevent hcd invoking generic phy methods again when phy-cells
is 0 in DT.

Change-Id: I2f0cca622d31a46dea0b805b83b676cc78e4d67c
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

cpufreq: dt: fix the warning when use opp_v1

Change-Id: I02c7a3cc68536b707baaa8a61f21ac4961184dda
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rockchip: fix gic node name for rk3328

The unit-address should be ff811000.

Change-Id: Id363731458bf2210ca5d92d679c00bbfdd3f9de4
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ARM64: dts: rockchip: add max-link-speed for rk3399

Per the errata of TRM, rk3399 won't support gen2 from
now on, so let's set max-link-speed to 1 in order not
to doing training for gen2.

Change-Id: I3fd455dc2427f2c67dc2dce8e8fabc4b521a49dd
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

usb: gadget: composite: fix double freeing of freed memory

The following message can be observed on rk3399 nougat board
when switch MTP/charge mode with KASan backported :

=============================================================================
BUG kmalloc-192 (Not tainted): Object already free
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in dwc3_gadget_ep_alloc_request+0x2c/0xf4 age=977 cpu=4 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.56+0x520/0x604
__slab_alloc.isra.53.constprop.55+0x24/0x34
kmem_cache_alloc_trace+0xa4/0x210
dwc3_gadget_ep_alloc_request+0x2c/0xf4
__ffs_func_bind_do_descs+0x15c/0x1b0
ffs_do_descs+0x50/0x180
ffs_func_bind+0x3e4/0x634
usb_add_function+0x78/0xe8
configfs_composite_bind+0x240/0x2d8
udc_bind_to_driver+0x38/0xcc
usb_udc_attach_driver+0x80/0xa8
gadget_dev_desc_UDC_store+0xa0/0xe4
configfs_write_file+0xfc/0x14c
__vfs_write+0x38/0xfc
vfs_write+0xac/0x174
INFO: Freed in dwc3_gadget_ep_free_request+0x84/0xbc age=4 cpu=4 pid=1
free_debug_processing+0x29c/0x36c
__slab_free+0x60/0x388
kfree+0x210/0x27c
dwc3_gadget_ep_free_request+0x84/0xbc
ffs_func_unbind+0x88/0xe4
purge_configs_funcs+0xa8/0x100
configfs_composite_unbind+0x34/0x5c
usb_gadget_remove_driver+0x74/0xa0
usb_gadget_unregister_driver+0x60/0xa4
unregister_gadget+0x24/0x48
gadget_dev_desc_UDC_store+0x7c/0xe4
configfs_write_file+0xfc/0x14c
__vfs_write+0x38/0xfc
vfs_write+0xac/0x174
SyS_write+0x54/0xa4
el0_svc_naked+0x24/0x28
Hardware name: Rockchip RK3399 Evaluation Board v3 edp (Android) (DT)
Call trace:
[<ffffff9008088490>] dump_backtrace+0x0/0x1c8
[<ffffff900808866c>] show_stack+0x14/0x1c
[<ffffff900835cbe4>] dump_stack+0x8c/0xac
[<ffffff900819f840>] print_trailer+0x188/0x198
[<ffffff900819f9bc>] object_err+0x3c/0x4c
[<ffffff90081a1fb8>] free_debug_processing+0x27c/0x36c
[<ffffff90081a2108>] __slab_free+0x60/0x388
[<ffffff90081a2c88>] kfree+0x210/0x27c
[<ffffff9008645a58>] composite_dev_cleanup+0x74/0xfc
[<ffffff900864789c>] configfs_composite_bind+0x2b8/0x2d8
[<ffffff900864953c>] udc_bind_to_driver+0x38/0xcc
[<ffffff9008649650>] usb_udc_attach_driver+0x80/0xa8
[<ffffff900864835c>] gadget_dev_desc_UDC_store+0xa0/0xe4
[<ffffff9008218144>] configfs_write_file+0xfc/0x14c
[<ffffff90081ac958>] __vfs_write+0x38/0xfc
[<ffffff90081ad290>] vfs_write+0xac/0x174
[<ffffff90081adc4c>] SyS_write+0x54/0xa4
[<ffffff90080826f0>] el0_svc_naked+0x24/0x28

This patch sets the usb_request pointer to NULL after the
free the usb_request buf. And the composite_dev_cleanup()
will check if the usb_request pointer is NULL before do
kfree and avoid double freeing freed menory.

Change-Id: I69df57553cb14d046b8b8206becd342a5e5fb7ba
Signed-off-by: William Wu <wulf@rock-chips.com>

power_supply: Add support for TI BQ25700 charger chip

Change-Id: I362b5bb06455c2ddb9583bb5882ee349438ba799
Signed-off-by: Shengfei xu <xsf@rock-chips.com>

mfd: fusb302: add USB_FAST to notify PD information

Change-Id: I1d0e244ad087d83935953efb3fff095e5d36cc24
Signed-off-by: Shunqing Chen <csq@rock-chips.com>

UPSTREAM: clk: rockchip: validity should be checked prior to cpu clock rate change

If validity is not checked prior to clock rate change, clk_set_rate(
cpu_clk, unsupported_rate) will return success, but the real clock rate
change operation is prohibited in post clock change event. Alough post
clock change event will report error due to unsupported clock rate is
set, but this error message is ignored by clock framework.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Tested-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(am from mmind/linux-rockchip.git branch v4.10-clk/next
 commit a554bb5fb01804a38fde3782831c9567d997939e)

Change-Id: I521700f86fe1d9bf2d1bef4ebe0350cd6f558c0a
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

ARM64: dts: rk3399: add some device support for tve1205g

1.add hid i2c toucpad
2.add hid i2c keyboard
3.add battery fuel gauge
4.add hall sensor
5.modify backlight polarity

Change-Id: I648d568a595324505f08684308197350a73d763e
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

ARM64: dts: rk3399-tve1205g: use simple-panel for edp panel

Edp controller support get timing from edid, so we can simple use
a dummy panel for display, so bootloader and kernel all can use same
timing from edid

Change-Id: I0cf19817aa1c38cae25603814c3605e6c16fe0f6
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/panel: support get bus_format from device-tree

copy include/uapi/linux/media-bus-format.h to include/dt-bindings/display/media-bus-format.h
So we can use media bus format on device-tree.

Change-Id: I8f63856c4d61c77958c24cd5a4436050b85a093c
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

ARM64: dts: rk3399: fix coding style for tve1205g

Change-Id: I88ec89d500142f4292fba6cd94fb8802d960dcc1
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

drm/rockchip: update pre dither down config

between vop big and hdmi/edp/dp connect mode is 10bit, so we disable
pre dither down, otherwise enable pre dither down.

Change-Id: If18ed05647d2eb3c6d5c159dd365ea66e55cd408
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

drm/rockchip: boot_logo: add vop loader power protect

Change-Id: I018aef21831b7df05393cfe6dd4782bc1f4a8938
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

arm64: dts add Rockchip RK3328 core dtsi and dts for EVB board

Change-Id: I7b0af1eff050262d38716ce83ec7debb6538b010
Signed-off-by: Chen Liang <cl@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: David Wu <david.wu@rock-chips.com>

phy: rockchip-inno-usb2: usb remote wakeup support

This adds support usb remote wakeup both host-port and otg-port,
each port can detect linestate irq then wakeup the whole system.

Change-Id: I5efcf958131827548954deb9360b9e98aa4bd0bc
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

drm/rockchip: fix compile warning unused private

Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_fb.c: In function 'rockchip_drm_fb_destroy':
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:50:31:
      warning: unused variable 'private' [-Wunused-variable]

Change-Id: Id120d86173823a68b9136a99f17fe5415041e471
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/panel: simple: Add support for INNOLUX N125HCE-GPA 1920x1080 panel

The INNOLUX N125HCE-GPA is a 12.5' TFT Liquid Crystal Display NB module
with LED Backlight unit and 30 pins eDP interface. This module supports
1920x1080 FHD mode and can display 16.7M colors.

Change-Id: I72318ac3317cd03e2301a1cab61cf126cd2a401b
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

phy: rockchip-inno-usb2: support otg vbus always powered on

Some platforms (e.g. RK3399 BOX board) otg port connector
interface is not standard, that is a Type-A connector with
vbus always powered on, looks like to work as host mode,
however, the otg port still need to support DRD mode.

In the current code, if otg vbus is always powered on, it
will cause USB2 PHY to detect a floating charger in error
case and power off USB2 PHY. This patch adds a new property
"rockchip,vbus-always-on" to fix this issue. With this patch,
we handle this case as otg host only mode, and avoid to do
charger detection and power off USB2 PHY.

Change-Id: I69e5e87021f3f2d654793e547264aec55ac664ef
Signed-off-by: William Wu <wulf@rock-chips.com>

ARM64: dts: rockchip: move rk3399 pmu-io-domain nodes to the pmugrf

Afer the "PM / AVS: rockchip-io: make io-domains a child of the GRF",
the pmu-io-domains should be a sub-node of the pmugrf simple-mfd.

Change-Id: Iebfe9041a604580ce3e5b028d7a143fcdbbdff25
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

ARM64: dts: rockchip: move rk3399 io-domain nodes to the grf

Afer the "PM / AVS: rockchip-io: make io-domains a child of the GRF",
the io-domains should be a sub-node of the grf simple-mfd.

Change-Id: Ic2a40726bccee8b795b5249e07f2537fd30b3f7b
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

rk: gcc-wrapper.py ignore memcontrol.c:5355

Change-Id: Ic55a0e167d8158069efe136b5af61d49be17c17d
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

ARM64: dts: rockchip: remove isp support for rk3399 evb3

Enable isp will cause system to halt on android booting, which
is caused by wrong voltage for vdd_gpu.

isp will set gpio directly, unfortunatly, it sets the enable gpio
of dc-dc for gpu.

There has no good solution for isp to fix this issue, so let's
disable the isp node for rk3399 evb3 firstly to make board works
well.

Change-Id: I5dd8c367a192ce793ed388aaf143125550e90621
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

drm/panel: simple: Add support for AUO B125HAN03.1 1920x1080 panel

The AUO B125HAN03.1 panel is a 12.5' FHD 16:9 Color TFT-LCD
and 30 pins eDP interface.

Change-Id: Ic2be5f1d5a3e25d805e0752c1c1fad0decc4f2d0
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

drm/panel: simple: Add support for BOE NV124FHM-N73 1920x1080 panel

The BOE NV125FHM-N73 panel is a 12.5' FHD 16:9 Color TFT-LCD
and 30 pins eDP interface.

Change-Id: Idc15fb7126bf778fd23a766b01c2d5cf9760d4f3
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>