gpu: ion: Map only the vma size given

When mapping carveout buffers into userspace, only map
the size of the vma given, not the full size of the buffer
since clients may map less than the buffer size.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Loop on the handle count when destroying

When destroying a handle, all kernel mappings to that handle
should be destroyed. Other handles may still have references
and valid mappings to the buffer underneath which should not
be destroyed. Loop on the handle reference count, not the buffer
reference count to get rid of all kernel mappings for the handle.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: ion_system_heap: Change allocations to GFP_HIGHUSER

Previously the ion_system_heap was using GFP_KERNEL, forcing all allocations
to be in lowmem.  This quickly causes us to run out of lowmem.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Set the dma_address of the sg list at alloc time

This patch sets the dma_address field of the sglist representing
an allocation at allocation time.  This technically breaks the dma api
which states that these addresses should be set when a particular device
takes ownership of a buffer via the dma_map apis.  In the case of our
systems the only dma address space is physical addresses.  Additionally,
we can not afford the overhead of calling dma_map_sg from this location
as it implies a cache invalidate that is not necessary if the memory
was previously mapped cached.  Instead, the expectation is that memory
being returned from the heaps is ready for dma in that if any cached
mappings of that memory exist they have been invalidated.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: fill in buffer->{dev,size} before mapping new buffers

At least one map_dma() implementation (EXYNOS_CONTIG) assumes the fields
are filled in

Signed-off-by: Greg Hackmann <ghackmann@google.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Get an sg_table from an ion handle

This patch adds an interface to return and sg_table given a
valid ion handle.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Allocate the sg_table at creation time rather than dynamically

Rather than calling map_dma on the allocations dynamically, this patch
switches to creating the sg_table at the time the buffer is created.
This is necessary because in future updates the sg_table will be used
for cache maintenance.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: support begin/end and kmap/kunmap dma_buf ops

These ops were added in the 3.4 kernel.  This patch adds support
for them to ion.  Previous ion_map/unmap_kernel api is also
retained in addition to this new api.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Use alloc_pages instead of vmalloc from the system heap

With this change the ion_system_heap will only use kernel address
space when the memory is mapped into the kernel (rare case).

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ion: Switch ion to use dma-buf

Ion now uses dma-buf file descriptors to share
buffers with userspace.  Ion becomes a dma-buf
exporter and any driver that can import dma-bufs
can now import ion file descriptors.

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: several bugfixes and enhancements of ION

1. Verifying if the size of memory allocation in ion_alloc() is aligned
by PAGE_SIZE at least. If it is not, this change makes the size to be
aligned by PAGE_SIZE.

2. Unmaps all mappings to the kernel and DMA address spaces when
destroying ion_buffer in ion_buffer_destroy(). This prevents leaks in
those virtual address spaces.

3. Makes the return value of ion_alloc() to be explicit Linux error code
when it fails to allocate a buffer.

4. Makes ion_alloc() implementation simpler. Removes 'goto' statement and
relavant call to ion_buffer_put().

5. Checks if the task is valid before calling put_task_struct() due
to failure on creating a ion client in ion_client_create().

6. Returns error when buffer allocation requested by userspace is failed.

Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ion: Add reserve function to ion

Rather than requiring each platform call memblock_remove or reserve
from the board file, add this to ion

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ion: Switch map/unmap dma api to sg_tables

Switch these api's from scatterlists to sg_tables

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: ion_carveout_heap: fix for 3.4

__arch_ioremap is no longer available, use __arm_ioremap instead.

Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: modified patch to apply to staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpu: ion: Add ION Memory Manager

Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
[jstultz: Squished in Colin Cross' move to staging change,
also disables ION from the build, as it won't compile till
the end of the patchset]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: fix an always true condition test

As pointed out by the kbuild test robot, and Ian Abbott, the dma >= 0 test
is always true because dma is unsigned. This generates a warn message:

drivers/staging/comedi/drivers/ni_at_a2150.c:715 a2150_attach()
  warn: always true condition '(dma >= 0) => (0-u32max >= 0)'

Fix the test as suggested by Ian Abbott.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Removed force to be a module

The driver was forced to "module only" following a previous failure to build
into the kernel. The problem was resolved several months ago.

This has been successfully tested with "make allyesconfig" on x86_64.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Move double definition of MAX_RATE to device_cfg.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning

byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.

This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Replace pStatistic->abyTxPktInfo with struct vnt_tx_pkt_info

Change s_vSaveTxPktInfo and BSSvUpdateNodeTxCounter to use vnt_tx_pkt_info
relayed to BSSvUpdateNodeTxCounter via INTnsProcessData.

pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni is unused and discarded.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_uCalculateLinkQual use netstats rx values

Use netstats rx_packets and rx_frame_errors.

Add frame errors to RXbBulkInProcessData

The current scStatistic.RxFcsErrCnt only records
USB errors not frame errors.

The scStatistic.RxOkCnt only recorded successful USB
transfers not actual successfully received packets.

So a more accurate reading is to use netstats rx_packets and
rx_frame_errors.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Get wireless stats qual.qual directly from s_uCalculateLinkQual

Calculate the qual from the tx_packets and wstats.discard.retries and
apply to wstats.qual.qual

Discard pDevice->scStatistic.LinkQuality.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove STAvUpdateTDStatCounter and apply directly to stats

Apply directly to net_device_stats and wireless stats.

tx_bytes are relayed from s_vSaveTxPktInfo via scStatistic,
so collect them there.

All other statistics in STAvUpdateTDStatCounter are dead code
and don't reach user.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: remove unnecessary pointer typecast

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: remove item that have been done in TODO file

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: reduce split lines in nic_rx_pkts

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: reduce split lines in nic_return_rfd

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: reduce split lines in et131x_rx_dma_memory_free

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: reduce split lines in et131x_rx_dma_memory_alloc

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: reduce split lines in et131x_config_rx_dma_regs

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: delete pointless wait queue related casts.

These serve no purpose at all, and can only mask real type
clash issues that one would want to actually see.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/seq: remove seq_{query,handle}

This is only part of the original Lustre tree commit. Main part of the
original commit modifies server side code.

Lustre-change: http://review.whamcloud.com/6765
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/target: move OUT to the unified target code

- Move OUT handler to the unified target code, so it can be
  used by both MDS and OST.

Lustre-change: http://review.whamcloud.com/6763
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3467
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
[pick client side of change. target is mostly server side code -- PengTao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/api: HSM import uses new released pattern

Import creates a released file using new RAID pattern flag
Import used a new ioctl() to implement the import in the
client kernel.

Lustre-change: http://review.whamcloud.com/6536
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3363
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
[Fix up kuid_t/guid_t conversion in llite/file.c -- Peng Tao]
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lnet: Add LNet Router Priority parameter

This change adds a priority parameter to the route module settings.
This paramter can be >= 0. Like hops, the lower the prioirty number
the higher the priority.  So lower numbered priorities will be
selected over higher numbers.

Lustre-change: http://review.whamcloud.com/5663
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2934
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove server macros from lustre_net.h

These macros are only used on server side.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zsmalloc: add more comment

This patch adds lots of comments and it will help others
to review and enhance.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zsmalloc: add Kconfig for enabling page table method

Zsmalloc has two methods 1) copy-based and 2) pte based to
access objects that span two pages.
You can see history why we supported two approach from [1].

But it was bad choice that adding hard coding to select arch
which want to use pte based method because there are lots of
SoC in an architecure and they can have different cache size,
CPU speed and so on so it would be better to expose it to user
as selectable Kconfig option like Andrew Morton suggested.

[1] https://lkml.org/lkml/2012/7/11/58

Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: btmtk_usb: remove driver

No one seems to be working on it anymore, and it really should be merged
into the already-existing btusb driver.  Also, there is not any proper
author attribution on the code (it was copied from the in-kernel
driver...)

If someone wants to pick this back up, we can easily revert this, but
for now, delete the driver.

Cc: Yu-Chen, Cho <acho@suse.com>
Cc: Jay Hung <jay.hung@mediatek.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: Staging: ft1000: Fixed C99 // comments styling issue

This patch removes C99 style comments from the driver and whenever
possible attempts to match coding style of the rest of the driver.

Signed-off-by: Daniel Dodge <danieldodgese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: baseband.c clean up BBbVT3184Init

White space clean up and remove camel case from variables.

pDevice-> priv
ntStatus -> status
wLength ->length
pbyAddr -> addr
pbyAgc -> agc
wLengthAgc ->length_agc
abyArray -> array

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: don't issue traffic to LS devices in FS mode

I fell over the problem reported in
https://github.com/raspberrypi/linux/pull/390:

"Issuing low-speed packets when the root port is in full-speed mode
 causes the root port to stop responding. Explicitly fail when
 enqueuing URBs to a LS endpoint on a FS bus."

with my dwc2 testing in NetBSD, so I adapted the change to dwc2.

Signed-off-by: Nick Hudson <skrll@netbsd.org>
[paulz: fixed up the patch to compile under Linux, and tested it]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: Add mx6 hdmi transmitter support

Add mx6 hdmi transmitter support.

Original work has been done by Sascha Hauer and Tony Prisk.
Special thanks to Russell King for his carefully review, many bug fixes and
testing of the mx6 HDMI driver.

Tested on the following boards:
- mx6q sabresd
- mx6dl sabresd
- mx6solo wandboard

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up pcmuio_start_intr()

Refactor this function a bit to remove the need for an extra indent
level and cleanup some of the odd line breaks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up pcmuio_attach()

Clean up the local variables, 'sdev_no' and 'asic' are both used in
simple for () loops. Use the local variable 'i' for both cases. The
'n_subdevs' variable is only used in one place, just remove it.

For aesthetics, add some whitespace to the subdevice init and reorder
it to follow the more typical style in comedi drivers.

Remove the unnecessary init of s->len_chanlist for subdevices that do
not support async commands (interrupts). The core will default it to
the correct value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove unneeded include

The <linux/slab.h> header is no longer needed by this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix types of some private data variables

The 'enabled_mask' is a bit mask of the channels that are enabled
for interrupt detection and should be an unsigned int.

The 'stop_count' is a >= 0 value that is set by the unsigned int
cmd->stop_arg. Make it an unsigned int.

The 'active' and 'continuous' members are flags. Make them unsigned
int bit-fields to save a bit of space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: document the spinlock_t variables

Add some comments about the two spinlock_t variables in the private
data. Also, add come comments for the functions that do not need to
lock/unlock the spinlock.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: add inline helpers to get the 'iobase', 'asic', and 'port'

To reduce the potential for bugs, and better document the code, introduce
some inline helper functions to consolidate the calculations needed to get
the 'iobase' for a given asic and the 'asic' and 'port' associated with a
given subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove unnecessary mask of triggered channels

The 'triggered' value is read directly from the three trigger id
registers and does not have any extra data that needs masked off.
Remove the 'mytrig' local variable and just use 'triggered' directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix pcmuio_dio_insn_bits()

This dio subdevice (*insn_bits) function does not follow the "norm"
for comedi drivers. It also _appears_ to return the incorrect state
of the channels.

Use the comedi_dio_update_state() helper to handle the boilerplate
for updating the output channel state. Due to the hardware we then
need to invert the state and mask the input channels before updating
the outputs.

Then read the hardware and invert the result to get the current true
state of the dio channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove subdevice private data

The subdevice private data is only needed for each 'asic' not for each
subdevice. Since the 'asic' can be calculated easily from the subdevice
we can merge the subdevice private data members directly into the
private data.

This removes the need to kcalloc/free the subdevice private data and
saves a bit of space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'asic' member from subdevice private data

The 'asic' associated with a subdevice can be easily calculated. The
functions that use this member in the subdevice private data can only
be called by the subdevices that support interrupts. Just calculate
the 'asic' when needed and remove the member variable and sanity checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up pcmuio_handle_asic_interrupt()

Unfortunatly, since there could be two asics, we can't use dev->read_subdev
to get the subdevice. But, the comedi_subdevice associated with the 'asic'
can easily be calculated. This allows removing the for () loop that searched
for the correct subdevice.

Tidy up the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: spinlock protect pcmuio_{write, read}()

Currently only the pcmuio_handle_asic_interrupt() function uses the
spinlock in the private data to protect the read of the paged interrupt
id registers. All accesses to the paged registers should be protected
to ensure that the page is not changed until the access is complete.
Move the lock/unlock into the pcmuio_{write,read}() functions to make
sure the access completes correctly. Rename the spinlock to variable
to clarify its use.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix interrupt requests

Legacy (ISA) interrupts are not sharable so this driver should not
be passing the IRQF_SHARED flag when requesting the interrupts.

This driver supports two board types:
  PCM-UIO48 with one asic (one interrupt source)
  PCM-UIO96 with two asics (two interrupt sources)

The PCM-UIO96 has a jumper that allows the two interrupt sources to
share an interrupt. This is safe for legacy interrupts as long as
the "shared" interrupt is handled by a single driver.

Modify the request_irq() code in this driver to correctly request the
interrupts. For the PCM-UI048 case (one asic) only one request_irq()
is needed. For the PCM-UIO96 (two asics) there are three cases:

  1) irq is shared, one request_irq() call
  2) only one asic has an irq, one request_irq() call
  3) two irqs, two request_irq() calls

The irq for the first asic (dev->irq) will be requested during the
attach if required. The comedi core will handle the freeing of this
irq during the detach.

The irq for the second asic (devpriv->irq2) will also be requested
during the attach if required. The freeing of this irq will be
handled by the driver during the detach.

Move the board reset and interrupt request code so it occurs early
in the attach. We can then check dev->irq and devpriv->irq2 to see
if the subdevice command support actually needs to be initialized.

This also simplifies the interrupt handler. The irq can be simply
checked against dev->irq and devpriv->irq2 to see which asic caused
the interrupt.

Add a call to pcmuio_reset() in the (*detach) to make sure the
interrupts are disabled before freeing the irqs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: factor board reset out of attach

Factor the code that resets the board and disables the interrupts out
of the attach.

Move the reset so it happens before the subdevices are initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_65xx: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: use dev->write_subdev

Use the dev->write_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci3200: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwrdv_apci3120: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt3000: don't fail attach if irq is not available

The irq is only needed to support async commands. Don't fail the attach
if it is not available.

Only hook up the command support if the request_irq() was successful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: only init async command members when needed

The 'len_chanlist' and 'cancel' members of the comedi_subdevice are
only used with async command support. Only initialize them if the irq
was sucessfully requested.

Also, only init the dev->read_subdev if we have the irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up irq request

Clean up the irq request in the attach of this driver and remove the
dev_{level} noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: tidy up irq request

Clean up the irq request in the attach of this driver and remove the
dev_{level} noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: use dev->write_subdev

Use the dev->write_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2814: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: the irq is only needed for async command support

An irq is only needed for async command support, modify the attach of
the subdevices so that the command support is only hooked up if the irq
request was successful. Remove the then unnecessary sanity check in
pci9111_ai_do_cmd().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq()

The dev->irq passed to request_irq() will always be 0 when the auto_attach
function is called. The pcidev->irq should be used instead to get the correct
irq number.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: remove unnecessary 'dev->irq' test

This function can only be called if the irq was sucessfully requested.
The dev->irq will always be valid.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: tidy up irq request

This driver only needs an irq in order to support async commands.
If the irq is not available the driver will still function for
single analog input reads.

Tidy up the code that does the irq requests so that the driver
will still attach if it is not avaliable.

Remove the noise about the irq during the attach.

Only hook up the async commands support if the irq is available.
Remove the then unnecessary sanity check in das1800_ai_do_cmd().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove unnecessary check in the irq handler

The sanity check of the irq is not necessary. If it _is_ wrong we have
bigger problems in the kernel...

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: refactor request_irq() during attach

Do the request_irq() before setting up the subdevices. This removes an
indent level and makes the code a bit cleaner.

Also, remove the dev_warn() noise about the irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: use dev->read_subdev

Use the dev->read_subdev that was setup in the device attach instead
of accessing the dev->subdevices array directly.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_2150: tidy up irq/dma request

This driver needs both an irq and dma in order to support async
commands. If the irq and dma are not available the driver will
still function for single analog input reads.

Tidy up the code that does the irq and dma requests so that the
driver will still attach if they are not avaliable. The attach
will still fail, with -ENOMEM, if the dma buffer cannot be allocated.

Remove the noise about the irq and dma during the attach.

Only hook up the async commands support if the irq and dma are
available. Remove the then unnecessary sanity check in a2150_ai_cmd().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: fixed space coding style issues

Fixed a coding style issue with spaces between function names and arguments:

func (x) -> func(x)

Signed-off-by: Samuel Dominguez <samuel.dominguez.lorenzo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: crystalhd: Fix typo in crystalhd

Correct spelling typo.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Remove last reference to compare_ether_addr

And use the normal is_<foo>_ether_addr functions and ETH_ALEN too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: trivial whitespace and line / character reductions

Tweak some whitespace, also remove a few redundant lines and
characters (mainly of type 'if (status != 0)' -> 'if (status)').

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: remove unhelpful comments

Get rid of some of the more unhelpful comments.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: remove two useless debug statements

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: clear up use of TRUEPHY defines

There are a large number of TRUEPHY defines in the driver, all of which
are unused or unnecessary. Remove / replace these.

As this results in et1310_phy_access_mii_bit() only being used for
reading bits, also change it's name to et1310_phy_read_mii_bit().

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: replace magic number bitmask with defined values

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: Remove unnecessary phydev checks

Several checks for a valid adapter->phydev pointer are made where the
pointer has already been checked previously in the code path.
Remove these redundant checks.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: improve indenting in et131x_adjust_link()

Negate some 'if' checks to return early, allowing a large block of code
to be un-indented.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: disable uframe_sched on the bcm2835

While Paul said that .uframe_sched should be enabled on the BCM2835,
and doing so works fine with the built-in wired Ethernet, it prevents
my WiFi dongle from operating correctly. Hence, disable the option so
that everything works.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: don't compile procfs code when CONFIG_PROC_FS is off

The patch changes to conditionally compile procfs related source files.
This includes lproc_fid.c, lproc_fld.c, lproc_lov.c, lvfs_lib.c, lproc_mdc.c,
lproc_mgc.c, lprocfs_status.c, lproc_osc.c and sec_lproc.c.

There is a checkpatch warning about usage of simple_strtoul() in the patch.
But it needs to be fixed in a separate patch because it is not related to
CONFIG_PROC_FS breakage here.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix undefined reference if CONFIG_PROC_FS is off

When building Lustre with CONFIG_PROC_FS off, we'll get many errors like:

drivers/staging/lustre/lustre/obdclass/llog_test.c:1053: error: implicit declaration of function ‘lprocfs_llog_test_init_vars’
make[3]: *** [drivers/staging/lustre/lustre/obdclass/llog_test.o] Error 1
make[2]: *** [drivers/staging/lustre/lustre/obdclass] Error 2
make[2]: *** Waiting for unfinished jobs....
  CC [M]  drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.o
drivers/staging/lustre/lustre/ptlrpc/pinger.c: In function ‘ptlrpc_pinger_main’:
drivers/staging/lustre/lustre/ptlrpc/pinger.c:331: error: implicit declaration of function ‘obd_update_maxusage’

The patch defines following symbols when CONFIG_PROC_FS is off:
fld_type_proc_dir, obd_update_maxusage(), obd_max_pages, obd_max_alloc, obd_alloc,
obd_pages, lprocfs_llog_test_init_vars().

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: remove ll_file_get_iov_count

It exactly copies generic_segment_checks() except wrongly calling
access_ok(VERIFY_READ) for aio read range. Drop it and just call
generic_segment_checks() instead.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix build error in ll_setxattr_common

With CONFIG_FS_POSIX_ACL off, we'll get
drivers/staging/lustre/lustre/llite/xattr.c: In function ‘ll_setxattr_common’:
drivers/staging/lustre/lustre/llite/xattr.c:187:7: error: ‘rce’ undeclared (first use in this function)
drivers/staging/lustre/lustre/llite/xattr.c:187:7: note: each undeclared identifier is reported only once for each function it appears in

It was introduced by 7fc1f83 (staging/lustre/llite: extended attribute cache)
that added new reference but didn't take care of CONFIG_FS_POSIX_ACL.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>