dalon.zhang [Wed, 29 Jul 2015 07:49:34 +0000 (15:49 +0800)]
camsys_drv: v0.0x21.0
Jianhong Chen [Mon, 27 Jul 2015 06:04:55 +0000 (14:04 +0800)]
dts: rk3368-p9: battery add and enable power_dc2otg
enable: otg device get power from dc adapter
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: xushengfei <xsf@rock-chips.com>
Jianhong Chen [Mon, 27 Jul 2015 06:04:16 +0000 (14:04 +0800)]
power: rk81x-battery: support otg device get power from dc
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: xushengfei <xsf@rock-chips.com>
Jianhong Chen [Sun, 26 Jul 2015 11:24:31 +0000 (19:24 +0800)]
power: rk81x-battery: fix power on sec base error
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: xushengfei <xsf@rock-chips.com>
Xiao Feng [Mon, 27 Jul 2015 06:28:02 +0000 (14:28 +0800)]
dvfs: rockchip: print error when clk is disable
Signed-off-by: Xiao Feng <xf@rock-chips.com>
Sugar Zhang [Fri, 24 Jul 2015 10:04:31 +0000 (18:04 +0800)]
ASoC: rockchip: i2s: add pcm transfer mode support.
usage: add i2s dts property "rockchip,xfer-mode"
rockchip,xfer-mode = <0>: i2s transfer mode.
rockchip,xfer-mode = <1>: pcm transfer mode.
if not define, use i2s transfer mode default.
pcm transfer mode is usually used for bt/modem voice.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Zheng Yang [Fri, 24 Jul 2015 08:31:28 +0000 (16:31 +0800)]
hdmi:rk3288:enable supporting 10bit output.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Fri, 24 Jul 2015 08:30:44 +0000 (16:30 +0800)]
hdmi:use 30bit lcdc interface when output 10bit mode.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hjc [Fri, 24 Jul 2015 07:26:59 +0000 (15:26 +0800)]
rk fb: add YUV420 10bit output mode for next soc
Signed-off-by: hjc <hjc@rock-chips.com>
Zheng Yang [Fri, 24 Jul 2015 03:05:37 +0000 (11:05 +0800)]
hdmi: hdmi_submit_work function support synchronous operation.
If hdmi_submit_work work in synchronous mode, the malloced delayed_work
is free by caller, not by hdmi_work_queue, to prevent delayed_work is
free before flush_delayed_work fucntion is executed.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Thu, 23 Jul 2015 09:04:57 +0000 (17:04 +0800)]
dts:arm:rk3288-box: ddr frequency set to 533 when playing 4K video.
If we playing 4K60Hz video, and there are more than two ui layer which
is continuously refreshing, bandwith will be not enougth under ddr 456MHz.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Thu, 23 Jul 2015 01:21:03 +0000 (09:21 +0800)]
hdmi:rk3288/rk3368: enable PHY SVSRET mode while in power-down mode.
While in power-down mode, the HDMI Tx PHY can be additionally set in
a lower mode of consumption by enabling the SVSRET mode, achieved by
asserting the SVSRET_MODEZ signal low.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Thu, 23 Jul 2015 01:05:37 +0000 (09:05 +0800)]
hdmi:rk3288/rk3368: set controller register in uboot logo mode.
EDID data readed in uboot and kernel may be different, and hdmi
output color mode is different in uboot and kernel: uboot output
RGB when EDID is wrong and kernel output YCbCr with right EDID.
But avi infomation and controller register is not set in kernel,
so the picture is wrong. Now fix this bug.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
zhangqing [Tue, 21 Jul 2015 16:33:11 +0000 (09:33 -0700)]
rk3288: clk: support clk_ddr round rate.
support clk_ddr round and set rate.
slove the develop-3.10-next merge missing some function.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Shengqin.Zhang [Tue, 21 Jul 2015 06:44:46 +0000 (14:44 +0800)]
fix rga_ioctl return error
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>
Zheng Yang [Mon, 20 Jul 2015 06:52:13 +0000 (14:52 +0800)]
hdmi: use dps->lock replace of hdmi->lock.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
linwei [Mon, 20 Jul 2015 03:33:02 +0000 (11:33 +0800)]
EDP:RK3288: add debugfs node for psr function.
enter the drectory:debugfs/edp.
command as follows:
echo 0 > psr : disable psr
echo 1 > psr : config and enable psr
echo 2 > psr : sink get in psr inactive
echo 3 > psr : sink get in psr state2
echo 4 > psr : sink get in psr state3
echo 5 > psr : open phy 4 lanes
echo 6 > psr : close phy 4 lanes
Signed-off-by: linwei <buluo.lin@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Mark Yao [Wed, 15 Jul 2015 10:09:21 +0000 (18:09 +0800)]
rk_fb: rk3288: fix win2 disable iommu crash.
dalon.zhang [Fri, 17 Jul 2015 07:12:06 +0000 (15:12 +0800)]
uvc: support the query of iommu_enabled
hwg [Thu, 16 Jul 2015 12:32:39 +0000 (20:32 +0800)]
bcmdhd wifi: support ap6356 nvram auto recognize
Zheng Yang [Thu, 16 Jul 2015 09:45:14 +0000 (17:45 +0800)]
eDP:rk3288:ignore grf probe error when probe.
rockhip,grf node is not exist on rk3288, we
need to ignore grf probe error.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
linwei [Wed, 15 Jul 2015 10:12:06 +0000 (18:12 +0800)]
eDP:RK3288 check format for rk32_dp.c rk32_dp.h
Signed-off-by: linwei <buluo.lin@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
zhangqing [Thu, 16 Jul 2015 11:49:42 +0000 (04:49 -0700)]
rk3288: clk: slove make warning for clk-ops.c
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
zhangqing [Thu, 16 Jul 2015 11:11:36 +0000 (04:11 -0700)]
rk3288: clk: support clk_vop set 594M.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
zhangqing [Wed, 15 Jul 2015 18:05:22 +0000 (11:05 -0700)]
rk3288: clk: support aclk_vio 594M.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
zhangqing [Wed, 15 Jul 2015 17:35:55 +0000 (10:35 -0700)]
rk: pmic: rk818: add interface to set ldo sleep state.
add interface to set ldo sleep state,
which hope can dynamically modify the ldo sleep state.
Signed-off-by: chenjianhong <chenjianhong@rock-chips.com>
Alpha Lin [Wed, 15 Jul 2015 06:49:51 +0000 (14:49 +0800)]
VPU: pmu idle request before cru operation.
pmu idle request before cru operation to ensure the hardware
don't be reset during runing. without this hardware maybe hang
up for bus access failure.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
Alpha Lin [Fri, 10 Jul 2015 03:45:39 +0000 (11:45 +0800)]
RK3288 VPU: add cru reset resource.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
zhangqing [Tue, 14 Jul 2015 15:19:40 +0000 (08:19 -0700)]
rk3x:pmic: rk818:enable hdmi5v in sleep mode and improve buck efficiency
enable hdmi5v in sleep mode for low power.
improve buck efficiency for low power.
Signed-off-by: chenjianhong <chenjianhong@rock-chips.com>
xubilv [Tue, 14 Jul 2015 05:55:42 +0000 (13:55 +0800)]
MIPI: fix the first wake-up not display bug.
Signed-off-by: xubilv <xbl@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 14:19:45 +0000 (22:19 +0800)]
power: rk81x battery: use get_monotonic_boottime to get system run time
local_clock will lose the suspend time, so we use get_monotonic_boottime instead
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 14:26:29 +0000 (22:26 +0800)]
power: rk81x-battery: modify low power check threshold voltage
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 14:21:22 +0000 (22:21 +0800)]
power: rk81x-battery: add calc seconds availability check
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 14:27:43 +0000 (22:27 +0800)]
power: rk81x-battery: add debug message dump limit
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 14:31:03 +0000 (22:31 +0800)]
power: rk81x-battery: optimize zero discharge algorithm
avoid display_soc to be initialed in some case which makes dsoc
drop too quick
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Jianhong Chen [Mon, 13 Jul 2015 15:00:13 +0000 (23:00 +0800)]
power: rk81x-battery: get charger type by usb notifier instead of polling
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
Sugar Zhang [Tue, 14 Jul 2015 02:24:42 +0000 (10:24 +0800)]
dts: rk3368-p9_818: disable vcc_codec when system sleep.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Zheng Yang [Tue, 14 Jul 2015 02:02:37 +0000 (10:02 +0800)]
hdmi:rk3036/rk3128: fix picture flicker error when setting audio.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Tue, 14 Jul 2015 01:52:18 +0000 (09:52 +0800)]
hdmi:rk3288/rk3368: modify avi colorimetry information according to input colorimetry.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Tue, 14 Jul 2015 01:33:45 +0000 (09:33 +0800)]
hdmi: support parse and modify colorimetry.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Shengqin.Zhang [Mon, 13 Jul 2015 07:05:44 +0000 (15:05 +0800)]
fix rga2 3368 first proc scale bug
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>
Shengqin.Zhang [Sun, 12 Jul 2015 10:56:52 +0000 (18:56 +0800)]
fix rga2 soft reset may cause rga status uncorrect
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>
Shengqin.Zhang [Sun, 12 Jul 2015 10:51:06 +0000 (18:51 +0800)]
fix rga miss flush cmd reg to DDR bug
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>
Sugar Zhang [Fri, 10 Jul 2015 08:46:25 +0000 (16:46 +0800)]
ASoC: es8316: reinit codec when resume from deep sleep.
because codec power will be cut off when enter deep sleep.
so need reinit codec when resume.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Sugar Zhang [Fri, 10 Jul 2015 08:27:25 +0000 (16:27 +0800)]
ASoC: rockchip: i2s: move pinctrl_pm_* to suspend/resume.
some codec initializtion depends on i2s's mclk/lrck, when codec enter
deep sleep, codec power loss, then codec resume and reinit
codec logic which need mclk/lrck, if these clk is not ready, codec will
work abnormally.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 09:13:26 +0000 (17:13 +0800)]
hdmi: move show sink info to debug node.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 08:03:59 +0000 (16:03 +0800)]
hdmi: modify debug string mode.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 07:12:53 +0000 (15:12 +0800)]
hdmi: mute output before disabled or suspended.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
guoyi [Fri, 10 Jul 2015 06:51:45 +0000 (14:51 +0800)]
Drivers: TP: disable vcc_tp when gt9xx in suspend mode
Signed-off-by: guoyi <gy@rock-chips.com>
guoyi [Fri, 10 Jul 2015 06:50:38 +0000 (14:50 +0800)]
rk3368: rk3368-p9_818.dts: set vcc_tp sleep mode to disabled
Signed-off-by: guoyi <gy@rock-chips.com>
guoyi [Fri, 10 Jul 2015 06:46:33 +0000 (14:46 +0800)]
PMIC:rk818.dtsi: remove rk818_reg_ldo2 aways-on,
then we can disable it during OS is running
Signed-off-by: guoyi <gy@rock-chips.com>
Alpha Lin [Fri, 10 Jul 2015 06:38:05 +0000 (14:38 +0800)]
RK3368: add vpu cru reset resource.
Add cru reset resource according to RESET CONTROLLER.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
Alpha Lin [Fri, 10 Jul 2015 06:35:26 +0000 (14:35 +0800)]
VPU: add cru reset support.
This depend on RESET_CONTROLLER enable on kernel.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
Shawn Lin [Fri, 10 Jul 2015 06:03:25 +0000 (14:03 +0800)]
mmc: rk_sdmmc: enhance recovery flow
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Shawn Lin [Fri, 10 Jul 2015 06:01:59 +0000 (14:01 +0800)]
dts: rockchip: add cru regmap refnode for mmc
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Jens Axboe [Fri, 10 Jul 2015 05:17:35 +0000 (13:17 +0800)]
direct-io: only inc/dec inode->i_dio_count for file systems
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-and-Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Shawn Lin [Fri, 10 Jul 2015 04:46:49 +0000 (12:46 +0800)]
defconfig: rockchip: enable CONFIG_MMC_DW_SKIP_CACHE_OP
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Shawn Lin [Fri, 10 Jul 2015 01:20:11 +0000 (09:20 +0800)]
fs: direct-io: convert rw from READ to KERNEL_READ
KERNEL_READ equal READ puls REQ_KERNEL, which indicates
this brq comes from direct-io. Any block-layer devices who
care this req type can get it now.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Shawn Lin [Wed, 8 Jul 2015 09:36:16 +0000 (17:36 +0800)]
mmc: rk_sdmmc: add MMC_DW_SKIP_CACHE_OP for data manipulation
Direct IO of filesystem had recursive searched and map the addr
itself, so mmc drivers can avoid to do the same ops in order to
improve throughput. We got 30% improvement for 4KB bs packet test.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Shawn Lin [Wed, 8 Jul 2015 09:32:06 +0000 (17:32 +0800)]
arm64: dma-mapping: conditional skip map_sg by attrs
Add if statement(DMA_ATTR_SKIP_CPU_SYNC) for __swiotlb_map_sg_attrs
to skip invalidating each sg element
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 03:33:57 +0000 (11:33 +0800)]
hdmi:rk3368/rk3288: modify phy termination resistance.
Set single-ended source termination resistance
to 100ohm for HDMI1.4 and 50ohm for HDMI2.0.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 03:00:49 +0000 (11:00 +0800)]
hdmi:rk3368/rk3288: set color format in avi to RGB before mute output.
For some sink, it will random recognize YCbCr as RGB when swithing
hdmi format, picture will covered with purple. If we set color
fomat in avi to RGB and reset avi to YCbCr, picture will be ok. So
we set avi to RGB before mute ouput when switching hdmi format.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hecanyang [Fri, 10 Jul 2015 02:48:17 +0000 (10:48 +0800)]
dts:sdmmc: slow down sdmmc frequence to 37.5MHz for SDK board
SDK board sdmmc can't run 50MHz, otherwise SD initialising will return error.
log as below. slow down sdmmc frequence to 37.5MHz can fix it.
<4>[ 802.611901] [0: kworker/0:2: 644] rk_sdmmc: BOOT The card is inserted. ===!!!!!!==[mmc1]
<6>[ 802.838728] [0: kworker/u16:0: 6] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 3
96825HZ div = 63)
<4>[ 802.838858] [0: kworker/u16:0: 6] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for
init[mmc1]
<6>[ 802.990527] [0: kworker/u16:0: 6] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual
50000000HZ div = 0)
<4>[ 802.990671] [0: kworker/u16:0: 6] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock
[mmc1]
<3>[ 802.996461] [0: kworker/u16:0: 6] mmc1: error -84 whilst initialising SD card
Signed-off-by: hecanyang <hcy@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 02:42:55 +0000 (10:42 +0800)]
tve:rk1000: set default cvbd mode to PAL.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Fri, 10 Jul 2015 02:40:58 +0000 (10:40 +0800)]
dts:rk3368-box: enable uboot logo
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hwg [Thu, 9 Jul 2015 10:59:56 +0000 (18:59 +0800)]
rfkill-wlan: repair vref pmu ctrl problem
Mark Yao [Thu, 9 Jul 2015 10:03:09 +0000 (18:03 +0800)]
rk_vop: rk3288: fix kernel logo crash with iommu enable
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Sugar Zhang [Thu, 9 Jul 2015 08:17:50 +0000 (16:17 +0800)]
ASoC: hdmi_spdif: support format SNDRV_PCM_FMTBIT_S24_LE
because of DMA_SLAVE_BUSWIDTH_4_BYTES, we support SNDRV_PCM_FMTBIT_S24_LE
which store data in low three bytes. not support SNDRV_PCM_FMTBIT_S24_3LE
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Sugar Zhang [Thu, 9 Jul 2015 01:40:05 +0000 (09:40 +0800)]
ASoC: rockchip: implement suspend/resume for i2s
use regmap_reinit_cache to restore hw registers after power loss
during a suspend/resume cycle.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
huang zhibao [Wed, 8 Jul 2015 01:41:51 +0000 (09:41 +0800)]
dts: 3368 box dts add dcdc eta3558
Shawn Lin [Tue, 7 Jul 2015 02:05:45 +0000 (10:05 +0800)]
mmc: rk_sdmmc: fix wrong skip condiction of post_tmo
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
ShenZhengyi [Tue, 7 Jul 2015 01:18:59 +0000 (09:18 +0800)]
tve:rk1000: fix rk1000 suspend and resume error
Signed-off-by: ShenZhengyi <szy@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Tue, 7 Jul 2015 01:26:51 +0000 (09:26 +0800)]
dts:rk3288-box: enable uboot logo.
ShenZhengyi [Mon, 6 Jul 2015 01:54:36 +0000 (09:54 +0800)]
tve:gm7122: When gm7122 init, do not switch fb.
it can avoid green screen, when HDMI switch to CVBS.
Signed-off-by: ShenZhengyi <szy@rock-chips.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Sugar Zhang [Mon, 6 Jul 2015 09:08:14 +0000 (17:08 +0800)]
ASoC: hdmi_spdif: config hdmi audio when hdmi using spdif source.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Sugar Zhang [Mon, 6 Jul 2015 09:06:00 +0000 (17:06 +0800)]
ASoC: spdif: fill channel status sample freq.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
guoyi [Mon, 6 Jul 2015 07:02:47 +0000 (15:02 +0800)]
rk3368: pmic: rk808:adjust dcdc voltage step
Signed-off-by: guoyi <gy@rock-chips.com>
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Shengqin.Zhang [Mon, 6 Jul 2015 05:59:24 +0000 (13:59 +0800)]
change RGA2 dtsi name for all platform
Signed-off-by: Shengqin.Zhang <zsq@rock-chips.com>
hwg [Fri, 3 Jul 2015 11:23:38 +0000 (19:23 +0800)]
bcmdhd wifi: auto recognize for AP62x2
Sugar Zhang [Thu, 2 Jul 2015 12:02:31 +0000 (20:02 +0800)]
ASoC: rockchip: rename rk30_i2s.c to rk_i2s.c
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Sugar Zhang [Thu, 2 Jul 2015 11:53:06 +0000 (19:53 +0800)]
ASoC: rockchip: refactor i2s driver.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Sugar Zhang [Thu, 2 Jul 2015 11:26:27 +0000 (19:26 +0800)]
HDMI: add a helper function for config hdmi audio.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Zheng Yang [Wed, 1 Jul 2015 07:11:30 +0000 (15:11 +0800)]
rockchip_defconfig: support rk1000.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Wed, 1 Jul 2015 07:09:39 +0000 (15:09 +0800)]
rk1000: fix ypbpr compile error.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Wed, 1 Jul 2015 07:06:57 +0000 (15:06 +0800)]
dts: rk3288 box: fix some error.
1. fix audio codec.
2. framebuffer size set to 1080P.
3. fix hdmi setting error.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hwg [Wed, 1 Jul 2015 06:53:29 +0000 (14:53 +0800)]
bcmdhd wifi: nvram auto recognize for AP6335
Zheng Yang [Wed, 1 Jul 2015 04:02:04 +0000 (12:02 +0800)]
dts: add rk3288-box.dts.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Wed, 1 Jul 2015 03:59:02 +0000 (11:59 +0800)]
dtsi:rk3288: add remotectl pwm.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Tue, 30 Jun 2015 03:26:10 +0000 (11:26 +0800)]
HDMI:rk3368/rk3288: delete some unused code.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Tue, 30 Jun 2015 03:19:31 +0000 (11:19 +0800)]
HDMI:rk3368/rk3288: add debugfs node regs_phy to modify phy regs.
and rename debugfs node hdmi to regs_ctrl.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Aiyoujun [Tue, 30 Jun 2015 02:07:18 +0000 (10:07 +0800)]
dts:rk3368-box-r88_808: add dts support for the BOX board of R88(RK3368)_PMU_Vxx
Signed-off-by: Aiyoujun <ayj@rock-chips.com>
huang zhibao [Fri, 26 Jun 2015 10:28:05 +0000 (18:28 +0800)]
delete unused code and update coding style
David Wu [Fri, 26 Jun 2015 08:57:36 +0000 (16:57 +0800)]
rk3368: tsadc: support print temp from console
Signed-off-by: David Wu <wdc@rock-chips.com>
David Wu [Fri, 26 Jun 2015 08:15:12 +0000 (16:15 +0800)]
rk3368: tsadc: add hw shut temp
if temp reached hw_shut_temp three times continuously, system would power off.
Signed-off-by: David Wu <wdc@rock-chips.com>
David Wu [Fri, 26 Jun 2015 06:49:54 +0000 (14:49 +0800)]
rk3368: tsadc: get temp from scpi interface
Signed-off-by: David Wu <wdc@rock-chips.com>
zhangqing [Thu, 25 Jun 2015 23:50:06 +0000 (16:50 -0700)]
rk3368: clk: cpll: make cpll low jitter.
This modify is for cpll low jitter.
Make the signal of clk_gmac better.
Signed-off-by: zhangqing <zhangqing@rock-chips.com>
Xiao Feng [Thu, 25 Jun 2015 12:05:35 +0000 (20:05 +0800)]
dvfs: rockchip: fix min_temp_limit
Signed-off-by: Xiao Feng <xf@rock-chips.com>
Xiao Feng [Thu, 25 Jun 2015 12:04:41 +0000 (20:04 +0800)]
arm64: rockchip: rk3368: dts: fix min_temp_limit
Signed-off-by: Xiao Feng <xf@rock-chips.com>
Frank Wang [Thu, 25 Jun 2015 10:17:46 +0000 (18:17 +0800)]
rk3368: mailbox: Added SCPI APIs for TSADC function.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
David Wu [Thu, 25 Jun 2015 07:09:19 +0000 (15:09 +0800)]
rk3368: tsadc: prevent to get temp when system going to suspend.
Signed-off-by: David Wu <wdc@rock-chips.com>