Programming Languages Research Group: Git - firefly-linux-kernel-4.4.55.git/log

ixgbe: add support for new 82599 device

commit 7d145282da8d1ae4ba5f7ead8a4f51183496803c upstream.

This patch adds support for new device ID.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sata_svw: check DMA start bit before reset

commit b03e66a6be91f8389fcd902ab6c1563db1c9c06b upstream.

If kdump is triggered with pending IO, controller may not respond causing
kdump to fail.

http://marc.info/?l=linux-ide&m=133032255424658&w=2

During error recovery ata_do_dev_read_id never completes due hang
in mmio_insw.

ata_do_dev_read_id
ata_sff_data_xfer
ioread16_rep
mmio_insw

if DMA start bit is cleared before reset, PIO command is successful
and kdump succeeds.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: add support for X540-AT1

commit df376f0de167754da9b3ece4afdb5bb8bf3fbf3e upstream.

This patch adds device support for Ethernet Controller X540-AT1.

Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bas_gigaset: fix pre_reset handling

commit c6fdd8e5d0c65bb8821dc6da26ee1a2ddd58b3cc upstream.

The delayed work function int_in_work() may call usb_reset_device()
and thus, indirectly, the driver's pre_reset method. Trying to
cancel the work synchronously in that situation would deadlock.
Fix by avoiding cancel_work_sync() in the pre_reset method.

If the reset was NOT initiated by int_in_work() this might cause
int_in_work() to run after the post_reset method, with urb_int_in
already resubmitted, so handle that case gracefully.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add support for Realtek ALC292

commit af02dde8a609d8d071c4b31a82df811a55690a4a upstream.

We found a new codec ID 292, and that just a simple quirk would enable
sound output/input on this ALC292 chip.

BugLink: https://bugs.launchpad.net/bugs/1081466
Tested-by: Acelan Kao <acelan.kao@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix missing beep on ASUS X43U notebook

commit 7110005e8d5c3cd418fc4b64f9f124f004422a9a upstream.

Signed-off-by: Duncan Roe <duncan_roe@acslink.net.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add new codec ALC283 ALC290 support

commit 7ff34ad80b7080fafaac8efa9ef0061708eddd51 upstream.

These are compatible with standard ALC269 parser.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: not any error from do_sigaltstack() should fail rt_sigreturn()

commit fae2ae2a900a5c7bb385fe4075f343e7e2d5daa2 upstream.

If a signal handler is executed on altstack and another signal comes,
we will end up with rt_sigreturn() on return from the second handler
getting -EPERM from do_sigaltstack(). It's perfectly OK, since we
are not asking to change the settings; in fact, they couldn't have been
changed during the second handler execution exactly because we'd been
on altstack all along. 64bit sigreturn on sparc treats any error from
do_sigaltstack() as "SIGSEGV now"; we need to switch to the same semantics
we are using on other architectures.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd: Fix lock ordering bug in journal_unmap_buffer()

commit 25389bb207987b5774182f763b9fb65ff08761c8 upstream.

Commit 09e05d48 introduced a wait for transaction commit into
journal_unmap_buffer() in the case we are truncating a buffer undergoing commit
in the page stradding i_size on a filesystem with blocksize < pagesize. Sadly
we forgot to drop buffer lock before waiting for transaction commit and thus
deadlock is possible when kjournald wants to lock the buffer.

Fix the problem by dropping the buffer lock before waiting for transaction
commit. Since we are still holding page lock (and that is OK), buffer cannot
disappear under us.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: bcm: initialize ifindex for timeouts without previous frame reception

commit 81b401100c01d2357031e874689f89bd788d13cd upstream.

Set in the rx_ifindex to pass the correct interface index in the case of a
message timeout detection. Usually the rx_ifindex value is set at receive
time. But when no CAN frame has been received the RX_TIMEOUT notification
did not contain a valid value.

Reported-by: Andre Naujoks <nautsch2@googlemail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon: add AGPMode 1 quirk for RV250

commit 45171002b01b2e2ec4f991eca81ffd8430fd0aec upstream.

The Intel 82855PM host bridge / Mobility FireGL 9000 RV250 combination
in an (outdated) ThinkPad T41 needs AGPMode 1 for suspend/resume (under
KMS, that is). So add a quirk for it.

(Change R250 to RV250 in comment for preceding quirk too.)

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: deinitialize ibss-internals after emptiness check

commit b78a4932f5fb11fadf41e69c606a33fa6787574c upstream.

The check whether the IBSS is active and can be removed should be
performed before deinitializing the fields used for the check/search.
Otherwise, the configured BSS will not be found and removed properly.

To make it more clear for the future, rename sdata->u.ibss to the
local pointer ifibss which is used within the checks.

This behaviour was introduced by
f3209bea110cade12e2b133da8b8499689cb0e2e
("mac80211: fix IBSS teardown race")

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Ignacy Gawedzki <i@lri.fr>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: avoid wake_futex() for a PI futex_q

commit aa10990e028cac3d5e255711fb9fb47e00700e35 upstream.

Dave Jones reported a bug with futex_lock_pi() that his trinity test
exposed. Sometime between queue_me() and taking the q.lock_ptr, the
lock_ptr became NULL, resulting in a crash.

While futex_wake() is careful to not call wake_futex() on futex_q's with
a pi_state or an rt_waiter (which are either waiting for a
futex_unlock_pi() or a PI futex_requeue()), futex_wake_op() and
futex_requeue() do not perform the same test.

Update futex_wake_op() and futex_requeue() to test for q.pi_state and
q.rt_waiter and abort with -EINVAL if detected. To ensure any future
breakage is caught, add a WARN() to wake_futex() if the same condition
is true.

This fix has seen 3 hours of testing with "trinity -c futex" on an
x86_64 VM with 4 CPUS.

[akpm@linux-foundation.org: tidy up the WARN()]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-by: Dave Jones <davej@redat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: fix deadlock with request based dm and queue request_fn recursion

commit a8c32a5c98943d370ea606a2e7dc04717eb92206 upstream.

Request based dm attempts to re-run the request queue off the
request completion path. If used with a driver that potentially does
end_io from its request_fn, we could deadlock trying to recurse
back into request dispatch. Fix this by punting the request queue
run to kblockd.

Tested to fix a quickly reproducible deadlock in such a scenario.

Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: slram: invalid checking of absolute end address

commit c36a7ff4578ab6294885aef5ef241aeec4cdb1f0 upstream.

Fixed parsing end absolute address.

Signed-off-by: Jiri Engelthaler <engycz@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PARISC: fix user-triggerable panic on parisc

commit 441a179dafc0f99fc8b3a8268eef66958621082e upstream.

int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset,
                                    unsigned int sigsetsize)
{
        sigset_t old_set, new_set;
        int ret;

        if (set && get_sigset32(set, &new_set, sigsetsize))

...
static int
get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
{
        compat_sigset_t s;
        int r;

        if (sz != sizeof *set) panic("put_sigset32()");

In other words, rt_sigprocmask(69, (void *)69, 69) done by 32bit process
will promptly panic the box.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PARISC: fix virtual aliasing issue in get_shared_area()

commit 949a05d03490e39e773e8652ccab9157e6f595b4 upstream.

On Thu, 2012-11-01 at 16:45 -0700, Michel Lespinasse wrote:
> Looking at the arch/parisc/kernel/sys_parisc.c implementation of
> get_shared_area(), I do have a concern though. The function basically
> ignores the pgoff argument, so that if one creates a shared mapping of
> pages 0-N of a file, and then a separate shared mapping of pages 1-N
> of that same file, both will have the same cache offset for their
> starting address.
>
> This looks like this would create obvious aliasing issues. Am I
> misreading this ? I can't understand how this could work good enough
> to be undetected, so there must be something I'm missing here ???

This turns out to be correct and we need to pay attention to the pgoff as
well as the address when creating the virtual address for the area.
Fortunately, the bug is rarely triggered as most applications which use pgoff
tend to use large values (git being the primary one, and it uses pgoff in
multiples of 16MB) which are larger than our cache coherency modulus, so the
problem isn't often seen in practise.

Reported-by: Michel Lespinasse <walken@google.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ua101, usx2y: fix broken MIDI output

commit e99ddfde6ae0dd2662bb40435696002b590e4057 upstream.

Commit 88a8516a2128 (ALSA: usbaudio: implement USB autosuspend) added
autosuspend code to all files making up the snd-usb-audio driver.
However, midi.c is part of snd-usb-lib and is also used by other
drivers, not all of which support autosuspend. Thus, calls to
usb_autopm_get_interface() could fail, and this unexpected error would
result in the MIDI output being completely unusable.

Make it work by ignoring the error that is expected with drivers that do
not support autosuspend.

Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com>
Reported-by: Devin Venable <venable.devin@gmail.com>
Reported-by: Dr Nick Bailey <nicholas.bailey@glasgow.ac.uk>
Reported-by: Jannis Achstetter <jannis_achstetter@web.de>
Reported-by: Rui Nuno Capela <rncbc@rncbc.org>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: isci: copy fis 0x34 response into proper buffer

commit 49bd665c5407a453736d3232ee58f2906b42e83c upstream.

SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register
Device to Host (FIS 0x34) frame Initiator resets phy.
In the frame handler routine response (FIS 0x34) was copied into wrong
buffer and upper layer did not receive any answer which resulted in
timeout and reset.
This patch corrects this bug.

Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: report error to MMC core if we cannot suspend

commit dd321acddc3be1371263b8c9e6c6f2af89f63d57 upstream.

When host_sleep_config command fails we should return error to
MMC core to indicate the failure for our device.

The misspelled variable is also removed as it's redundant.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Add new USB ID

commit a485e827f07bfdd0762059386e6e787bed6e81ee upstream.

This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102.
Its FCC ID is the same.

Signed-off-by: Albert Pool <albertpool@solcon.nl>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, microcode, AMD: Add support for family 16h processors

commit 36c46ca4f322a7bf89aad5462a3a1f61713edce7 upstream.

Add valid patch size for family 16h processors.

[ hpa: promoting to urgent/stable since it is hw enabling and trivial ]

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Acked-by: Andreas Herrmann <herrmann.der.user@googlemail.com>
Link: http://lkml.kernel.org/r/1353004910-2204-1-git-send-email-boris.ostrovsky@amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-32: Fix invalid stack address while in softirq

commit 1022623842cb72ee4d0dbf02f6937f38c92c3f41 upstream.

In 32 bit the stack address provided by kernel_stack_pointer() may
point to an invalid range causing NULL pointer access or page faults
while in NMI (see trace below). This happens if called in softirq
context and if the stack is empty. The address at &regs->sp is then
out of range.

Fixing this by checking if regs and &regs->sp are in the same stack
context. Otherwise return the previous stack pointer stored in struct
thread_info. If that address is invalid too, return address of regs.

BUG: unable to handle kernel NULL pointer dereference at 0000000a
IP: [<c1004237>] print_context_stack+0x6e/0x8d
*pde = 00000000
Oops: 0000 [#1] SMP
Modules linked in:
Pid: 4434, comm: perl Not tainted 3.6.0-rc3-oprofile-i386-standard-g4411a05 #4 Hewlett-Packard HP xw9400 Workstation/0A1Ch
EIP: 0060:[<c1004237>] EFLAGS: 00010093 CPU: 0
EIP is at print_context_stack+0x6e/0x8d
EAX: ffffe000 EBX: 0000000a ECX: f4435f94 EDX: 0000000a
ESI: f4435f94 EDI: f4435f94 EBP: f5409ec0 ESP: f5409ea0
  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: 0000000a CR3: 34ac9000 CR4: 000007d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process perl (pid: 4434, ti=f5408000 task=f5637850 task.ti=f4434000)
Stack:
  000003e8 ffffe000 00001ffc f4e39b00 00000000 0000000a f4435f94 c155198c
  f5409ef0 c1003723 c155198c f5409f04 00000000 f5409edc 00000000 00000000
  f5409ee8 f4435f94 f5409fc4 00000001 f5409f1c c12dce1c 00000000 c155198c
Call Trace:
  [<c1003723>] dump_trace+0x7b/0xa1
  [<c12dce1c>] x86_backtrace+0x40/0x88
  [<c12db712>] ? oprofile_add_sample+0x56/0x84
  [<c12db731>] oprofile_add_sample+0x75/0x84
  [<c12ddb5b>] op_amd_check_ctrs+0x46/0x260
  [<c12dd40d>] profile_exceptions_notify+0x23/0x4c
  [<c1395034>] nmi_handle+0x31/0x4a
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c13950ed>] do_nmi+0xa0/0x2ff
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c13949e5>] nmi_stack_correct+0x28/0x2d
  [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45
  [<c1003603>] ? do_softirq+0x4b/0x7f
  <IRQ>
  [<c102a06f>] irq_exit+0x35/0x5b
  [<c1018f56>] smp_apic_timer_interrupt+0x6c/0x7a
  [<c1394746>] apic_timer_interrupt+0x2a/0x30
Code: 89 fe eb 08 31 c9 8b 45 0c ff 55 ec 83 c3 04 83 7d 10 00 74 0c 3b 5d 10 73 26 3b 5d e4 73 0c eb 1f 3b 5d f0 76 1a 3b 5d e8 73 15 <8b> 13 89 d0 89 55 e0 e8 ad 42 03 00 85 c0 8b 55 e0 75 a6 eb cc
EIP: [<c1004237>] print_context_stack+0x6e/0x8d SS:ESP 0068:f5409ea0
CR2: 000000000000000a
---[ end trace 62afee3481b00012 ]---
Kernel panic - not syncing: Fatal exception in interrupt

V2:
* add comments to kernel_stack_pointer()
* always return a valid stack address by falling back to the address
  of regs

Reported-by: Yang Wei <wei.yang@windriver.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jun Zhang <jun.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ifenslave: Fix unused variable warnings.

commit 450faacc621dbe0a4945ed8292afd45f4602d263 upstream.

Documentation/networking/ifenslave.c: In function ‘if_getconfig’:
Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable]
Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable]

The purpose of this function is to simply print out the values
it probes, so...

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riva/fbdev: fix several -Wuninitialized

commit c718a54649475cc397484f96e70f6d0fdd267165 upstream.

Fix several -Wuninitialized compiler warnings by changing the
order of getting modedb in riva_update_default_var() to set
first the fallback and then the prefered timing.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/block/DAC960: fix -Wuninitialized warning

commit cecd353a02fb1405c8a72a324b26b5acf97e7411 upstream.

Set CommandMailbox with memset before use it. Fix for:

drivers/block/DAC960.c: In function ‘DAC960_V1_EnableMemoryMailboxInterface’:
arch/x86/include/asm/io.h:61:1: warning: ‘CommandMailbox.Bytes[12]’
may be used uninitialized in this function [-Wuninitialized]
drivers/block/DAC960.c:1175:30: note: ‘CommandMailbox.Bytes[12]’
was declared here

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning

commit bca505f1097c725708ddc055cf8055e922b0904b upstream.

Fixed compiler warning:

comparison between ‘DAC960_V2_IOCTL_Opcode_T’ and ‘enum <anonymous>’

Renamed enum, added a new enum for SCSI_10.CommandOpcode in
DAC960_V2_ProcessCompletedCommand().

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcmcia - Use pcmcia_request_irq()

commit 08ef79490dad6b88010e94795cf9f89b018ed504 upstream.

The drivers don't require the exclusive irqs. Let's fix the deprecated
warnings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.0.53

Resource: fix wrong resource window calculation

commit 47ea91b4052d9e94b9dca5d7a3d947fbebd07ba9 upstream.

__find_resource() incorrectly returns a resource window which overlaps
an existing allocated window.  This happens when the parent's
resource-window spans 0x00000000 to 0xffffffff and is entirely allocated
to all its children resource-windows.

__find_resource() looks for gaps in resource allocation among the
children resource windows.  When it encounters the last child window it
blindly tries the range next to one allocated to the last child.  Since
the last child's window ends at 0xffffffff the calculation overflows,
leading the algorithm to believe that any window in the range 0x0000000
to 0xfffffff is available for allocation.  This leads to a conflicting
window allocation.

Michal Ludvig reported this issue seen on his platform.  The following
patch fixes the problem and has been verified by Michal.  I believe this
bug has been there for ages.  It got exposed by git commit 2bbc6942273b
("PCI : ability to relocate assigned pci-resources")

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Michal Ludvig <mludvig@logix.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI : Calculate right add_size

commit a4ac9fea016fc5c09227eb479bd35e34978323a4 upstream.

During debug of one SRIOV enabled hotplug device, we found found that
add_size is not passed properly.

The device has devices under two level bridges:

+-[0000:80]-+-00.0-[81-8f]--
|           +-01.0-[90-9f]--
|           +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0  Oracle Corporation Device
|           |                               \-03.0-[a3]--+-00.0  Oracle Corporation Device

Which means later the parent bridge will not try to add a big enough range:

[  557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff]
[  557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref]
[  557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff]
[  557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref]
[  557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff]
[  557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref]
[  557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000)
[  557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff]
[  557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000)
[  557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff]

It turns out we did not calculate size1 properly.

static resource_size_t calculate_memsize(resource_size_t size,
                resource_size_t min_size,
                resource_size_t size1,
                resource_size_t old_size,
                resource_size_t align)
{
        if (size < min_size)
                size = min_size;
        if (old_size == 1 )
                old_size = 0;
        if (size < old_size)
                size = old_size;
        size = ALIGN(size + size1, align);
        return size;
}

We should not pass add_size with min_size in calculate_memsize since
that will make add_size not contribute final add_size.

So just pass add_size with size1 to calculate_memsize().

With this change, we should have chance to remove extra addon in
pci_reassign_resource.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andrew Worsley <amworsley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI : ability to relocate assigned pci-resources

commit 2bbc6942273b5b3097bd265d82227bdd84b351b2 upstream.

Currently pci-bridges are allocated enough resources to satisfy their immediate
requirements. Any additional resource-requests fail if additional free space,
contiguous to the one already allocated, is not available. This behavior is not
reasonable since sufficient contiguous resources, that can satisfy the request,
are available at a different location.

This patch provides the ability to expand and relocate a allocated resource.

v2: Changelog: Fixed size calculation in pci_reassign_resource()
v3: Changelog : Split this patch. The resource.c changes are already
upstream. All the pci driver changes are in here.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andrew Worsley <amworsley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix sel_netnode_insert() suspicious rcu dereference

commit 88a693b5c1287be4da937699cb82068ce9db0135 upstream.

===============================
[ INFO: suspicious RCU usage. ]
3.5.0-rc1+ #63 Not tainted
-------------------------------
security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by trinity-child1/8750:
#0: (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0

stack backtrace:
Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63
Call Trace:
[<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130
[<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0
[<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0
[<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0
[<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0
[<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60
[<ffffffff812c9536>] security_socket_bind+0x16/0x20
[<ffffffff815550ca>] sys_bind+0x7a/0x100
[<ffffffff816c03d5>] ? sysret_check+0x22/0x5d
[<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0
[<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b

This patch below does what Paul McKenney suggested in the previous thread.

Signed-off-by: Dave Jones <davej@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Protect reiserfs_quota_write() with write lock

commit 361d94a338a3fd0cee6a4ea32bbc427ba228e628 upstream.

Calls into reiserfs journalling code and reiserfs_get_block() need to
be protected with write lock. We remove write lock around calls to high
level quota code in the next patch so these paths would suddently become
unprotected.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Move quota calls out of write lock

commit 7af11686933726e99af22901d622f9e161404e6b upstream.

Calls into highlevel quota code cannot happen under the write lock. These
calls take dqio_mutex which ranks above write lock. So drop write lock
before calling back into quota code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Protect reiserfs_quota_on() with write lock

commit b9e06ef2e8706fe669b51f4364e3aeed58639eb2 upstream.

In reiserfs_quota_on() we do quite some work - for example unpacking
tail of a quota file. Thus we have to hold write lock until a moment
we call back into the quota code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Fix lock ordering during remount

commit 3bb3e1fc47aca554e7e2cc4deeddc24750987ac2 upstream.

When remounting reiserfs dquot_suspend() or dquot_resume() can be called.
These functions take dqonoff_mutex which ranks above write lock so we have
to drop it before calling into quota code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Wait for session recovery to finish before returning

commit 399f11c3d872bd748e1575574de265a6304c7c43 upstream.

Currently, we will schedule session recovery and then return to the
caller of nfs4_handle_exception.  This works for most cases, but causes
a hang on the following test case:

Client Server
------ ------
Open file over NFS v4.1
Write to file
Expire client
Try to lock file

The server will return NFS4ERR_BADSESSION, prompting the client to
schedule recovery.  However, the client will continue placing lock
attempts and the open recovery never seems to be scheduled.  The
simplest solution is to wait for session recovery to run before retrying
the lock.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fix overlay on i830M

commit a9193983f4f292a82a00c72971c17ec0ee8c6c15 upstream.

The overlay on the i830M has a peculiar failure mode: It works the
first time around after boot-up, but consistenly hangs the second time
it's used.

Chris Wilson has dug out a nice errata:

"1.5.12 Clock Gating Disable for Display Register
Address Offset: 06200h–06203h

"Bit 3
Ovrunit Clock Gating Disable.
0 = Clock gating controlled by unit enabling logic
1 = Disable clock gating function
DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay
& L2 Cache clock gating must be disabled in order to prevent device
hangs when turning off overlay.SW must turn off Ovrunit clock gating
(6200h) and L2 Cache clock gating (C8h)."

Now I've nowhere found that 0xc8 register and hence couldn't apply the
l2 cache workaround. But I've remembered that part of the magic that
the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache
allocations so that the overlay scaler has some scratch space.

And while pondering how that could explain the hang the 2nd time we
enable the overlay, I've remembered that the old ums overlay code did
_not_ issue the OVERLAY_OFF cmd.

And indeed, disabling the OFF cmd results in the overlay working
flawlessly, so I guess we can workaround the lack of the above
workaround by simply never disabling the overlay engine once it's
enabled.

Note that we have the first part of the above w/a already implemented
in i830_init_clock_gating - leave that as-is to avoid surprises.

v2: Add a comment in the code.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827
Tested-by: Rhys <rhyspuk@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
- Adjust context
- s/intel_ring_emit(ring, /OUT_RING(/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sky2: Fix for interrupt handler

commit d663d181b9e92d80c2455e460e932d34e7a2a7ae upstream.

Re-enable interrupts if it is not our interrupt

Signed-off-by: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eCryptfs: check for eCryptfs cipher support at mount

commit 5f5b331d5c21228a6519dcb793fc1629646c51a6 upstream.

The issue occurs when eCryptfs is mounted with a cipher supported by
the crypto subsystem but not by eCryptfs. The mount succeeds and an
error does not occur until a write. This change checks for eCryptfs
cipher support at mount time.

Resolves Launchpad issue #338914, reported by Tyler Hicks in 03/2009.
https://bugs.launchpad.net/ecryptfs/+bug/338914

Signed-off-by: Tim Sally <tsally@atomicpeace.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eCryptfs: Copy up POSIX ACL and read-only flags from lower mount

commit 069ddcda37b2cf5bb4b6031a944c0e9359213262 upstream.

When the eCryptfs mount options do not include '-o acl', but the lower
filesystem's mount options do include 'acl', the MS_POSIXACL flag is not
flipped on in the eCryptfs super block flags. This flag is what the VFS
checks in do_last() when deciding if the current umask should be applied
to a newly created inode's mode or not. When a default POSIX ACL mask is
set on a directory, the current umask is incorrectly applied to new
inodes created in the directory. This patch ignores the MS_POSIXACL flag
passed into ecryptfs_mount() and sets the flag on the eCryptfs super
block depending on the flag's presence on the lower super block.

Additionally, it is incorrect to allow a writeable eCryptfs mount on top
of a read-only lower mount. This missing check did not allow writes to
the read-only lower mount because permissions checks are still performed
on the lower filesystem's objects but it is best to simply not allow a
rw mount on top of ro mount. However, a ro eCryptfs mount on top of a rw
mount is valid and still allowed.

https://launchpad.net/bugs/1009207

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: use usb_serial_put in usb_serial_probe errors

commit 0658a3366db7e27fa32c12e886230bb58c414c92 upstream.

The use of kfree(serial) in error cases of usb_serial_probe
was invalid - usb_serial structure allocated in create_serial()
gets reference of usb_device that needs to be put, so we need
to use usb_serial_put() instead of simple kfree().

Signed-off-by: Jan Safrata <jan.nikitenko@gmail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Cc: Richard Retanubun <richardretanubun@ruggedcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_nat: don't check for port change on ICMP tuples

commit 38fe36a248ec3228f8e6507955d7ceb0432d2000 upstream.

ICMP tuples have id in src and type/code in dst.
So comparing src.u.all with dst.u.all will always fail here
and ip_xfrm_me_harder() is called for every ICMP packet,
even if there was no NAT.

Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: Mark SYN/ACK packets as invalid from original direction

commit 64f509ce71b08d037998e93dd51180c19b2f464c upstream.

Clients should not send such packets. By accepting them, we open
up a hole by wich ephemeral ports can be discovered in an off-path
attack.

See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel,
http://arxiv.org/abs/1201.2074

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: Validate the sequence number of dataless ACK packets as well

commit 4a70bbfaef0361d27272629d1a250a937edcafe4 upstream.

We spare nothing by not validating the sequence number of dataless
ACK packets and enabling it makes harder off-path attacks.

See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel,
http://arxiv.org/abs/1201.2074

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: Fix gcc -x syntax

commit b1e0d8b70fa31821ebca3965f2ef8619d7c5e316 upstream.

The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.

This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.

Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: use unlimited DMA burst for TX

commit aee77e4accbeb2c86b1d294cd84fec4a12dde3bd upstream.

The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have
a box where this prevents the interface from using the gigabit line to its full
potential. This patch solves the problem by setting TX_DMA_BURST to unlimited.

The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl
(XID 0c900880). TSO is enabled.

I used netperf (TCP_STREAM test) to measure the dependency of TX throughput
on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024,
'7'=unlimited). This chart shows the results:
http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png

Interesting points:
- With the current DMA burst limit (1024):
   - at the default MTU=1500 I get only 842 Mbit/s.
   - when going from small MTU, the performance rises monotonically with
     increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's
     a sudden drop to 762 MBit/s from which the throughput rises monotonically
     again with further MTU increases.
- With a smaller DMA burst limit (512):
   - there's a similar peak at MTU=1076 and another one at MTU=564.
- With unlimited DMA burst:
   - at the default MTU=1500 I get nice 940 Mbit/s.
   - the throughput rises monotonically with increasing MTU with no strange
     peaks.

Notice that the peaks occur at MTU sizes that are multiples of the DMA burst
limit plus 52. Why 52? Because:
  20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52

The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too,
except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes.
CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B",
i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs
the smaller burst limit, or if any other versions have similar requirements.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-rps: Fix brokeness causing OOO packets

[ Upstream commit baefa31db2f2b13a05d1b81bdf2d20d487f58b0a ]

In commit c445477d74ab3779 which adds aRFS to the kernel, the CPU
selected for RFS is not set correctly when CPU is changing.
This is causing OOO packets and probably other issues.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: correct check in dev_addr_del()

[ Upstream commit a652208e0b52c190e57f2a075ffb5e897fe31c3b ]

Check (ha->addr == dev->dev_addr) is always true because dev_addr_init()
sets this. Correct the check to behave properly on addr removal.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: setsockopt(IPIPPROTO_IPV6, IPV6_MINHOPCOUNT) forgot to set return value

[ Upstream commit d4596bad2a713fcd0def492b1960e6d899d5baa8 ]

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: avoid undefined behavior in do_ip_setsockopt()

[ Upstream commit 0c9f79be295c99ac7e4b569ca493d75fdcc19e4e ]

(1<<optname) is undefined behavior in C with a negative optname or
optname larger than 31. In those cases the result of the shift is
not necessarily zero (e.g., on x86).

This patch simplifies the code with a switch statement on optname.
It also allows the compiler to generate better code (e.g., using a
64-bit mask).

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: fix sigset_t accessor functions

commit 34fa78b59c52d1db3513db4c1a999db26b2e9ac2 upstream.

The sigaddset/sigdelset/sigismember functions that are implemented with
bitfield insn cannot allow the sigset argument to be placed in a data
register since the sigset is wider than 32 bits. Remove the "d"
constraint from the asm statements.

The effect of the bug is that sending RT signals does not work, the signal
number is truncated modulo 32.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireless: allow 40 MHz on world roaming channels 12/13

commit 43c771a1963ab461a2f194e3c97fded1d5fe262f upstream.

When in world roaming mode, allow 40 MHz to be used
on channels 12 and 13 so that an AP that is, e.g.,
using HT40+ on channel 9 (in the UK) can be used.

Reported-by: Eddie Chapman <eddie@ehuk.net>
Tested-by: Eddie Chapman <eddie@ehuk.net>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add Alcatel X220/X500D USB IDs

commit c0bc3098871dd9b964f6b45ec1e4d70d87811744 upstream.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs

commit fcb21645f1bd86d2be29baf48aa1b298de52ccc7 upstream.

The Dell 5800 appears to be a simple rebrand of the Novatel E362.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/gup: add missing TASK_SIZE check to get_user_pages_fast()

commit d55c4c613fc4d4ad2ba0fc6fa2b57176d420f7e4 upstream.

When walking page tables we need to make sure that everything
is within bounds of the ASCE limit of the task's address space.
Otherwise we might calculate e.g. a pud pointer which is not
within a pud and dereference it.
So check against TASK_SIZE (which is the ASCE limit) before
walking page tables.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: introduce categorized lprops counter

commit 98a1eebda3cb2a84ecf1f219bb3a95769033d1bf upstream.

This commit is a preparation for a subsequent bugfix. We introduce a
counter for categorized lprops.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: fix mounting problems after power cuts

commit a28ad42a4a0c6f302f488f26488b8b37c9b30024 upstream.

This is a bugfix for a problem with the following symptoms:

1. A power cut happens
2. After reboot, we try to mount UBIFS
3. Mount fails with "No space left on device" error message

UBIFS complains like this:

UBIFS error (pid 28225): grab_empty_leb: could not find an empty LEB

The root cause of this problem is that when we mount, not all LEBs are
categorized. Only those which were read are. However, the
'ubifs_find_free_leb_for_idx()' function assumes that all LEBs were
categorized and 'c->freeable_cnt' is valid, which is a false assumption.

This patch fixes the problem by teaching 'ubifs_find_free_leb_for_idx()'
to always fall back to LPT scanning if no freeable LEBs were found.

This problem was reported by few people in the past, but Brent Taylor
was able to reproduce it and send me a flash image which cannot be mounted,
which made it easy to hunt the bug. Kudos to Brent.

Reported-by: Brent Taylor <motobud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: Use card_list during DAPM shutdown

commit 445632ad6dda42f4d3f9df2569a852ca0d4ea608 upstream.

DAPM shutdown incorrectly uses "list" field of codec struct while
iterating over probed components (codec_dev_list). "list" field
refers to codecs registered in the system, "card_list" field is
used for probed components.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8978: pll incorrectly configured when codec is master

commit 55c6f4cb6ef49afbb86222c6a3ff85329199c729 upstream.

When MCLK is supplied externally and BCLK and LRC are configured as outputs
(codec is master), the PLL values are only calculated correctly on the first
transmission. On subsequent transmissions, at differenct sample rates, the
wrong PLL values are used. Test for f_opclk instead of f_pllout to determine
if the PLL values are needed.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Force to reset IEC958 status bits for AD codecs

commit ae24c3191ba2ab03ec6b4be323e730e00404b4b6 upstream.

Several bug reports suggest that the forcibly resetting IEC958 status
bits is required for AD codecs to get the SPDIF output working
properly after changing streams.

Original fix credit to Javeed Shaikh.

BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361
Reported-by: Robin Kreis <r.kreis@uni-bremen.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Cirrus: Fix coefficient index for beep configuration

commit 5a83b4b5a391f07141b157ac9daa51c409e71ab5 upstream.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: cryptd - disable softirqs in cryptd_queue_worker to prevent data corruption

commit 9efade1b3e981f5064f9db9ca971b4dc7557ae42 upstream.

cryptd_queue_worker attempts to prevent simultaneous accesses to crypto
workqueue by cryptd_enqueue_request using preempt_disable/preempt_enable.
However cryptd_enqueue_request might be called from softirq context,
so add local_bh_disable/local_bh_enable to prevent data corruption and
panics.

Bug report at http://marc.info/?l=linux-crypto-vger&m=134858649616319&w=2

v2:
- Disable software interrupts instead of hardware interrupts

Reported-by: Gurucharan Shetty <gurucharan.shetty@gmail.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: fix missing break

commit 848561d368751a1c0f679b9f045a02944506a801 upstream.

Anders Blomdell noted in 2010 that Fanotify lost events and provided a
test case.  Eric Paris confirmed it was a bug and posted a fix to the
list

  https://groups.google.com/forum/?fromgroups=#!topic/linux.kernel/RrJfTfyW2BE

but never applied it.  Repeated attempts over time to actually get him
to apply it have never had a reply from anyone who has raised it

So apply it anyway

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: bugfix: set current->reclaim_state to NULL while returning from kswapd()

commit b0a8cc58e6b9aaae3045752059e5e6260c0b94bc upstream.

In kswapd(), set current->reclaim_state to NULL before returning, as
current->reclaim_state holds reference to variable on kswapd()'s stack.

In rare cases, while returning from kswapd() during memory offlining,
__free_slab() and freepages() can access the dangling pointer of
current->reclaim_state.

Signed-off-by: Takamori Yamaguchi <takamori.yamaguchi@jp.sony.com>
Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.0.52

ALSA: usb-audio: Fix mutex deadlock at disconnection

commit 10e44239f67d0b6fb74006e61a7e883b8075247a upstream.

The recent change for USB-audio disconnection race fixes introduced a
mutex deadlock again.  There is a circular dependency between
chip->shutdown_rwsem and pcm->open_mutex, depicted like below, when a
device is opened during the disconnection operation:

A. snd_usb_audio_disconnect() ->
     card.c::register_mutex ->
       chip->shutdown_rwsem (write) ->
         snd_card_disconnect() ->
           pcm.c::register_mutex ->
             pcm->open_mutex

B. snd_pcm_open() ->
     pcm->open_mutex ->
       snd_usb_pcm_open() ->
         chip->shutdown_rwsem (read)

Since the chip->shutdown_rwsem protection in the case A is required
only for turning on the chip->shutdown flag and it doesn't have to be
taken for the whole operation, we can reduce its window in
snd_usb_audio_disconnect().

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Fix card refcount unbalance

commit 8bb4d9ce08b0a92ca174e41d92c180328f86173f upstream.

There are uncovered cases whether the card refcount introduced by the
commit a0830dbd isn't properly increased or decreased:
- OSS PCM and mixer success paths
- When lookup function gets NULL

This patch fixes these places.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel-iommu: Fix AB-BA lockdep report

commit 3e7abe2556b583e87dabda3e0e6178a67b20d06f upstream.

When unbinding a device so that I could pass it through to a KVM VM, I
got the lockdep report below.  It looks like a legitimate lock
ordering problem:

- domain_context_mapping_one() takes iommu->lock and calls
   iommu_support_dev_iotlb(), which takes device_domain_lock (inside
   iommu->lock).

- domain_remove_one_dev_info() starts by taking device_domain_lock
   then takes iommu->lock inside it (near the end of the function).

So this is the classic AB-BA deadlock.  It looks like a safe fix is to
simply release device_domain_lock a bit earlier, since as far as I can
tell, it doesn't protect any of the stuff accessed at the end of
domain_remove_one_dev_info() anyway.

BTW, the use of device_domain_lock looks a bit unsafe to me... it's
at least not obvious to me why we aren't vulnerable to the race below:

  iommu_support_dev_iotlb()
                                          domain_remove_dev_info()

  lock device_domain_lock
    find info
  unlock device_domain_lock

                                          lock device_domain_lock
                                            find same info
                                          unlock device_domain_lock

                                          free_devinfo_mem(info)

  do stuff with info after it's free

However I don't understand the locking here well enough to know if
this is a real problem, let alone what the best fix is.

Anyway here's the full lockdep output that prompted all of this:

     =======================================================
     [ INFO: possible circular locking dependency detected ]
     2.6.39.1+ #1
     -------------------------------------------------------
     bash/13954 is trying to acquire lock:
      (&(&iommu->lock)->rlock){......}, at: [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230

     but task is already holding lock:
      (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230

     which lock already depends on the new lock.

     the existing dependency chain (in reverse order) is:

     -> #1 (device_domain_lock){-.-...}:
            [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
            [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
            [<ffffffff812f8350>] domain_context_mapping_one+0x600/0x750
            [<ffffffff812f84df>] domain_context_mapping+0x3f/0x120
            [<ffffffff812f9175>] iommu_prepare_identity_map+0x1c5/0x1e0
            [<ffffffff81ccf1ca>] intel_iommu_init+0x88e/0xb5e
            [<ffffffff81cab204>] pci_iommu_init+0x16/0x41
            [<ffffffff81002165>] do_one_initcall+0x45/0x190
            [<ffffffff81ca3d3f>] kernel_init+0xe3/0x168
            [<ffffffff8157ac24>] kernel_thread_helper+0x4/0x10

     -> #0 (&(&iommu->lock)->rlock){......}:
            [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10
            [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
            [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
            [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230
            [<ffffffff812f8b42>] device_notifier+0x72/0x90
            [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0
            [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0
            [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20
            [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0
            [<ffffffff81373ccf>] device_release_driver+0x2f/0x50
            [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0
            [<ffffffff813724ac>] drv_attr_store+0x2c/0x30
            [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170
            [<ffffffff8117569e>] vfs_write+0xce/0x190
            [<ffffffff811759e4>] sys_write+0x54/0xa0
            [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b

     other info that might help us debug this:

     6 locks held by bash/13954:
      #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff811e4464>] sysfs_write_file+0x44/0x170
      #1:  (s_active#3){++++.+}, at: [<ffffffff811e44ed>] sysfs_write_file+0xcd/0x170
      #2:  (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81372edb>] driver_unbind+0x9b/0xc0
      #3:  (&__lockdep_no_validate__){+.+.+.}, at: [<ffffffff81373cc7>] device_release_driver+0x27/0x50
      #4:  (&(&priv->bus_notifier)->rwsem){.+.+.+}, at: [<ffffffff8108974f>] __blocking_notifier_call_chain+0x5f/0xb0
      #5:  (device_domain_lock){-.-...}, at: [<ffffffff812f6508>] domain_remove_one_dev_info+0x208/0x230

     stack backtrace:
     Pid: 13954, comm: bash Not tainted 2.6.39.1+ #1
     Call Trace:
      [<ffffffff810993a7>] print_circular_bug+0xf7/0x100
      [<ffffffff8109bf3e>] __lock_acquire+0x195e/0x1e10
      [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10
      [<ffffffff8109d57d>] ? trace_hardirqs_on_caller+0x13d/0x180
      [<ffffffff8109ca9d>] lock_acquire+0x9d/0x130
      [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230
      [<ffffffff81571475>] _raw_spin_lock_irqsave+0x55/0xa0
      [<ffffffff812f6421>] ? domain_remove_one_dev_info+0x121/0x230
      [<ffffffff810972bd>] ? trace_hardirqs_off+0xd/0x10
      [<ffffffff812f6421>] domain_remove_one_dev_info+0x121/0x230
      [<ffffffff812f8b42>] device_notifier+0x72/0x90
      [<ffffffff8157555c>] notifier_call_chain+0x8c/0xc0
      [<ffffffff81089768>] __blocking_notifier_call_chain+0x78/0xb0
      [<ffffffff810897b6>] blocking_notifier_call_chain+0x16/0x20
      [<ffffffff81373a5c>] __device_release_driver+0xbc/0xe0
      [<ffffffff81373ccf>] device_release_driver+0x2f/0x50
      [<ffffffff81372ee3>] driver_unbind+0xa3/0xc0
      [<ffffffff813724ac>] drv_attr_store+0x2c/0x30
      [<ffffffff811e4506>] sysfs_write_file+0xe6/0x170
      [<ffffffff8117569e>] vfs_write+0xce/0x190
      [<ffffffff811759e4>] sys_write+0x54/0xa0
      [<ffffffff81579a82>] system_call_fastpath+0x16/0x1b

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix reading of wrapped log data

commit 6ce377afd1755eae5c93410ca9a1121dfead7b87 upstream.

Commit 4439647 ("xfs: reset buffer pointers before freeing them") in
3.0-rc1 introduced a regression when recovering log buffers that
wrapped around the end of log. The second part of the log buffer at
the start of the physical log was being read into the header buffer
rather than the data buffer, and hence recovery was seeing garbage
in the data buffer when it got to the region of the log buffer that
was incorrectly read.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mos7840: remove unused variable

Fix warning about unused variable introduced by commit e681b66f2e19fa
("USB: mos7840: remove invalid disconnect handling") upstream.

A subsequent fix which removed the disconnect function got rid of the
warning but that one was only backported to v3.6.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: clear the entire sdvo infoframe buffer

commit b6e0e543f75729f207b9c72b0162ae61170635b2 upstream.

Like in the case of native hdmi, which is fixed already in

commit adf00b26d18e1b3570451296e03bcb20e4798cdd
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Tue Sep 25 13:23:34 2012 -0300

drm/i915: make sure we write all the DIP data bytes

we need to clear the entire sdvo buffer to avoid upsetting the
display.

Since infoframe buffer writing is now a bit more elaborate, extract it
into it's own function. This will be useful if we ever get around to
properly update the ELD for sdvo. Also #define proper names for the
two buffer indexes with fixed usage.

v2: Cite the right commit above, spotted by Paulo Zanoni.

v3: I'm too stupid to paste the right commit.

v4: Ben Hutchings noticed that I've failed to handle an underflow in
my loop logic, breaking it for i >= length + 8. Since I've just lost C
programmer license, use his solution. Also, make the frustrated 0-base
buffer size a notch more clear.

Reported-and-tested-by: Jürg Billeter <j@bitron.ch>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fixup infoframe support for sdvo

commit 81014b9d0b55fb0b48f26cd2a943359750d532db upstream.

At least the worst offenders:
- SDVO specifies that the encoder should compute the ecc. Testing also
  shows that we must not send the ecc field, so copy the dip_infoframe
  struct to a temporay place and avoid the ecc field. This way the avi
  infoframe is exactly 17 bytes long, which agrees with what the spec
  mandates as a minimal storage capacity (with the ecc field it would
  be 18 bytes).
- Only 17 when sending the avi infoframe. The SDVO spec explicitly
  says that sending more data than what the device announces results
  in undefined behaviour.
- Add __attribute__((packed)) to the avi and spd infoframes, for
  otherwise they're wrongly aligned. Noticed because the avi infoframe
  ended up being 18 bytes large instead of 17. We haven't noticed this
  yet because we don't use the uint16_t fields yet (which are the only
  ones that would be wrongly aligned).

This regression has been introduce by

3c17fe4b8f40a112a85758a9ab2aebf772bdd647 is the first bad commit
commit 3c17fe4b8f40a112a85758a9ab2aebf772bdd647
Author: David Härdeman <david@hardeman.nu>
Date:   Fri Sep 24 21:44:32 2010 +0200

    i915: enable AVI infoframe for intel_hdmi.c [v4]

Patch tested on my g33 with a sdvo hdmi adaptor.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25732
Tested-by: Peter Ross <pross@xvid.org> (G35 SDVO-HDMI)
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix hibernation device reset

commit 95e8f6a21996c4cc2c4574b231c6e858b749dce3 upstream.

The device would not reset properly when resuming from hibernation.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
Cc: linux-graphics-maintainer@vmware.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Handle futex_pi OWNER_DIED take over correctly

commit 59fa6245192159ab5e1e17b8e31f15afa9cff4bf upstream.

Siddhesh analyzed a failure in the take over of pi futexes in case the
owner died and provided a workaround.
See: http://sourceware.org/bugzilla/show_bug.cgi?id=14076

The detailed problem analysis shows:

Futex F is initialized with PTHREAD_PRIO_INHERIT and
PTHREAD_MUTEX_ROBUST_NP attributes.

T1 lock_futex_pi(F);

T2 lock_futex_pi(F);
   --> T2 blocks on the futex and creates pi_state which is associated
       to T1.

T1 exits
   --> exit_robust_list() runs
       --> Futex F userspace value TID field is set to 0 and
           FUTEX_OWNER_DIED bit is set.

T3 lock_futex_pi(F);
   --> Succeeds due to the check for F's userspace TID field == 0
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

T1 --> exit_pi_state_list()
       --> Transfers pi_state to waiter T2 and wakes T2 via
           rt_mutex_unlock(&pi_state->mutex)

T2 --> acquires pi_state->mutex and gains real ownership of the
       pi_state
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

T3 --> observes inconsistent state

This problem is independent of UP/SMP, preemptible/non preemptible
kernels, or process shared vs. private. The only difference is that
certain configurations are more likely to expose it.

So as Siddhesh correctly analyzed the following check in
futex_lock_pi_atomic() is the culprit:

if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {

We check the userspace value for a TID value of 0 and take over the
futex unconditionally if that's true.

AFAICT this check is there as it is correct for a different corner
case of futexes: the WAITERS bit became stale.

Now the proposed change

- if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
+       if (unlikely(ownerdied ||
+                       !(curval & (FUTEX_TID_MASK | FUTEX_WAITERS)))) {

solves the problem, but it's not obvious why and it wreckages the
"stale WAITERS bit" case.

What happens is, that due to the WAITERS bit being set (T2 is blocked
on that futex) it enforces T3 to go through lookup_pi_state(), which
in the above case returns an existing pi_state and therefor forces T3
to legitimately fight with T2 over the ownership of the pi_state (via
pi_state->mutex). Probelm solved!

Though that does not work for the "WAITERS bit is stale" problem
because if lookup_pi_state() does not find existing pi_state it
returns -ERSCH (due to TID == 0) which causes futex_lock_pi() to
return -ESRCH to user space because the OWNER_DIED bit is not set.

Now there is a different solution to that problem. Do not look at the
user space value at all and enforce a lookup of possibly available
pi_state. If pi_state can be found, then the new incoming locker T3
blocks on that pi_state and legitimately races with T2 to acquire the
rt_mutex and the pi_state and therefor the proper ownership of the
user space futex.

lookup_pi_state() has the correct order of checks. It first tries to
find a pi_state associated with the user space futex and only if that
fails it checks for futex TID value = 0. If no pi_state is available
nothing can create new state at that point because this happens with
the hash bucket lock held.

So the above scenario changes to:

T1 lock_futex_pi(F);

T2 lock_futex_pi(F);
   --> T2 blocks on the futex and creates pi_state which is associated
       to T1.

T1 exits
   --> exit_robust_list() runs
       --> Futex F userspace value TID field is set to 0 and
           FUTEX_OWNER_DIED bit is set.

T3 lock_futex_pi(F);
   --> Finds pi_state and blocks on pi_state->rt_mutex

T1 --> exit_pi_state_list()
       --> Transfers pi_state to waiter T2 and wakes it via
           rt_mutex_unlock(&pi_state->mutex)

T2 --> acquires pi_state->mutex and gains ownership of the pi_state
   --> Claims ownership of the futex and sets its own TID into the
       userspace TID field of futex F
   --> returns to user space

This covers all gazillion points on which T3 might come in between
T1's exit_robust_list() clearing the TID field and T2 fixing it up. It
also solves the "WAITERS bit stale" problem by forcing the take over.

Another benefit of changing the code this way is that it makes it less
dependent on untrusted user space values and therefor minimizes the
possible wreckage which might be inflicted.

As usual after staring for too long at the futex code my brain hurts
so much that I really want to ditch that whole optimization of
avoiding the syscall for the non contended case for PI futexes and rip
out the maze of corner case handling code. Unfortunately we can't as
user space relies on that existing behaviour, but at least thinking
about it helps me to preserve my mental sanity. Maybe we should
nevertheless :)

Reported-and-tested-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1210232138540.2756@ionos
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: send unsolicited neighbour advertisements to all-nodes

[ Upstream commit 60713a0ca7fd6651b951cc1b4dbd528d1fc0281b ]

As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6.,
unsolicited neighbour advertisements should be sent to the all-nodes
multicast address.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: fix oops in l2tp_eth_create() error path

[ Upstream commit 789336360e0a2aeb9750c16ab704a02cbe035e9e ]

When creating an L2TPv3 Ethernet session, if register_netdev() should fail for
any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the
32k-interface limit), the netdev is freed in the error path. However, the
l2tp_eth_sess structure's dev pointer is left uncleared, and this results in
l2tp_eth_delete() then attempting to unregister the same netdev later in the
session teardown. This results in an oops.

To avoid this, clear the session dev pointer in the error path.

Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix divide by zero in tcp algorithm illinois

[ Upstream commit 8f363b77ee4fbf7c3bbcf5ec2c5ca482d396d664 ]

Reading TCP stats when using TCP Illinois congestion control algorithm
can cause a divide by zero kernel oops.

The division by zero occur in tcp_illinois_info() at:
do_div(t, ca->cnt_rtt);
where ca->cnt_rtt can become zero (when rtt_reset is called)

Steps to Reproduce:
1. Register tcp_illinois:
     # sysctl -w net.ipv4.tcp_congestion_control=illinois
2. Monitor internal TCP information via command "ss -i"
     # watch -d ss -i
3. Establish new TCP conn to machine

Either it fails at the initial conn, or else it needs to wait
for a loss or a reset.

This is only related to reading stats.  The function avg_delay() also
performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its
calling point in update_params().  Thus, simply fix tcp_illinois_info().

Function tcp_illinois_info() / get_info() is called without
socket lock.  Thus, eliminate any race condition on ca->cnt_rtt
by using a local stack variable.  Simply reuse info.tcpv_rttcnt,
as its already set to ca->cnt_rtt.
Function avg_delay() is not affected by this race condition, as
its called with the socket lock.

Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: Fix memory leak on Tx data path

[ Upstream commit 39707c2a3ba5011038b363f84d37c8a98d2d9db1 ]

Driver anchors the tx urbs and defers the urb submission if
a transmit request comes when the interface is suspended.
Anchoring urb increments the urb reference count. These
deferred urbs are later accessed by calling usb_get_from_anchor()
for submission during interface resume. usb_get_from_anchor()
unanchors the urb but urb reference count remains same.
This causes the urb reference count to remain non-zero
after usb_free_urb() gets called and urb never gets freed.
Hence call usb_put_urb() after anchoring the urb to properly
balance the reference count for these deferred urbs. Also,
unanchor these deferred urbs during disconnect, to free them
up.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Set default hoplimit as zero.

[ Upstream commit 14edd87dc67311556f1254a8f29cf4dd6cb5b7d1 ]

Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the
hoplimit checking condition and default value in ip6_dst_hoplimit, not
zeros all hoplimit default value.

Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as
const, cause as a37e6e344910(net: force dst_default_metrics to const
section)

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix FIONREAD/SIOCINQ

[ Upstream commit a3374c42aa5f7237e87ff3b0622018636b0c847e ]

tcp_ioctl() tries to take into account if tcp socket received a FIN
to report correct number bytes in receive queue.

But its flaky because if the application ate the last skb,
we return 1 instead of 0.

Correct way to detect that FIN was received is to test SOCK_DONE.

Reported-by: Elliot Hughes <enh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: use kfree_rcu() in netlink_release()

[ Upstream commit 6d772ac5578f711d1ce7b03535d1c95bffb21dff ]

On some suspend/resume operations involving wimax device, we have
noticed some intermittent memory corruptions in netlink code.

Stéphane Marchesin tracked this corruption in netlink_update_listeners()
and suggested a patch.

It appears netlink_release() should use kfree_rcu() instead of kfree()
for the listeners structure as it may be used by other cpus using RCU
protection.

netlink_release() must set to NULL the listeners pointer when
it is about to be freed.

Also have to protect netlink_update_listeners() and
netlink_has_listeners() if listeners is NULL.

Add a nl_deref_protected() lockdep helper to properly document which
locks protects us.

Reported-by: Jonathan Kliegman <kliegs@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stéphane Marchesin <marcheu@google.com>
Cc: Sam Leffler <sleffler@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()

[ Upstream commit f6e80abeab928b7c47cc1fbf53df13b4398a2bec ]

Bug introduced by commit edfee0339e681a784ebacec7e8c2dc97dc6d2839
(sctp: check src addr when processing SACK to update transport state)

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Avoid endless sleep after disconnect

commit 0914f7961babbf28aaa2f19b453951fb4841c03f upstream.

When disconnect callback is called, each component should wake up
sleepers and check card->shutdown flag for avoiding the endless sleep
blocking the proper resource release.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Add a reference counter to card instance

commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 upstream.

For more strict protection for wild disconnections, a refcount is
introduced to the card instance, and let it up/down when an object is
referred via snd_lookup_*() in the open ops.

The free-after-last-close check is also changed to check this refcount
instead of the empty list, too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c

commit 888ea7d5ac6815ba16b3b3a20f665a92c7af6724 upstream.

Similar like the previous commit, cover with chip->shutdown_rwsem
and chip->shutdown checks.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Use rwsem for disconnect protection

commit 34f3c89fda4fba9fe689db22253ca8db2f5e6386 upstream.

Replace mutex with rwsem for codec->shutdown protection so that
concurrent accesses are allowed.

Also add the protection to snd_usb_autosuspend() and
snd_usb_autoresume(), too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix races at disconnection

commit 978520b75f0a1ce82b17e1e8186417250de6d545 upstream.

Close some races at disconnection of a USB audio device by adding the
chip->shutdown_mutex and chip->shutdown check at appropriate places.

The spots to put bandaids are:
- PCM prepare, hw_params and hw_free
- where the usb device is accessed for communication or get speed, in
mixer.c and others; the device speed is now cached in subs->speed
instead of accessing to chip->dev

The accesses in PCM open and close don't need the mutex protection
because these are already handled in the core PCM disconnection code.

The autosuspend/autoresume codes are still uncovered by this patch
because of possible mutex deadlocks. They'll be covered by the
upcoming change to rwsem.

Also the mixer codes are untouched, too. These will be fixed in
another patch, too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: PCM: Fix some races at disconnection

commit 9b0573c07f278e9888c352aa9724035c75784ea0 upstream.

Fix races at PCM disconnection:
- while a PCM device is being opened or closed
- while the PCM state is being changed without lock in prepare,
hw_params, hw_free ops

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (w83627ehf) Force initial bank selection

commit 3300fb4f88688029fff8dfb9ec0734f6e4cba3e7 upstream.

Don't assume bank 0 is selected at device probe time. This may not be
the case. Force bank selection at first register access to guarantee
that we read the right registers upon driver loading.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: restore open_count if drm_setup fails

commit 0f1cb1bd94a9c967cd4ad3de51cfdabe61eb5dcc upstream.

If drm_setup (called at first open) fails, the whole
open call has failed, so we should not keep the
open_count incremented.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate

[Fixed upstream as part of 0b728e1911c, but that's a much larger patch,
this is only the nfs portion backported as needed.]

Fix the following Oops in 3.5.1:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
PGD 337c63067 PUD 0
Oops: 0000 [#1] SMP
CPU 5
Modules linked in: nfs fscache nfsd lockd nfs_acl auth_rpcgss sunrpc af_packet binfmt_misc cpufreq_conservative cpufreq_userspace cpufreq_powersave dm_mod acpi_cpufreq mperf coretemp gpio_ich kvm_intel joydev kvm ioatdma hid_generic igb lpc_ich i7core_edac edac_core ptp serio_raw dca pcspkr i2c_i801 mfd_core sg pps_core usbhid crc32c_intel microcode button autofs4 uhci_hcd ttm drm_kms_helper drm i2c_algo_bit sysimgblt sysfillrect syscopyarea ehci_hcd usbcore usb_common scsi_dh_rdac scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh edd fan ata_piix thermal processor thermal_sys

Pid: 30431, comm: java Not tainted 3.5.1-2-default #1 Supermicro X8DTT/X8DTT
RIP: 0010:[<ffffffffa03789cd>]  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
RSP: 0018:ffff8801b418bd38  EFLAGS: 00010292
RAX: 00000000fffffff6 RBX: ffff88032016d800 RCX: 0000000000000020
RDX: ffffffff00000000 RSI: 0000000000000000 RDI: ffff8801824a7b00
RBP: ffff8801b418bdf8 R08: 7fffff0034323030 R09: fffffffff04c03ed
R10: ffff8801824a7b00 R11: 0000000000000002 R12: ffff8801824a7b00
R13: ffff8801824a7b00 R14: 0000000000000000 R15: ffff8803201725d0
FS:  00002b53a46cb700(0000) GS:ffff88033fc20000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 000000020a426000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process java (pid: 30431, threadinfo ffff8801b418a000, task ffff8801b5d20600)
Stack:
  ffff8801b418be44 ffff88032016d800 ffff8801b418bdf8 0000000000000000
  ffff8801824a7b00 ffff8801b418bdd7 ffff8803201725d0 ffffffff8116a9c0
  ffff8801b5c38dc0 0000000000000007 ffff88032016d800 0000000000000000
Call Trace:
  [<ffffffff8116a9c0>] lookup_dcache+0x80/0xe0
  [<ffffffff8116aa43>] __lookup_hash+0x23/0x90
  [<ffffffff8116b4a5>] lookup_one_len+0xc5/0x100
  [<ffffffffa03869a3>] nfs_sillyrename+0xe3/0x210 [nfs]
  [<ffffffff8116cadf>] vfs_unlink.part.25+0x7f/0xe0
  [<ffffffff8116f22c>] do_unlinkat+0x1ac/0x1d0
  [<ffffffff815717b9>] system_call_fastpath+0x16/0x1b
  [<00002b5348b5f527>] 0x2b5348b5f526
Code: ec 38 b8 f6 ff ff ff 4c 89 64 24 18 4c 89 74 24 28 49 89 fc 48 89 5c 24 08 48 89 6c 24 10 49 89 f6 4c 89 6c 24 20 4c 89 7c 24 30 <f6> 46 38 40 0f 85 d1 00 00 00 e8 c4 c4 df e0 48 8b 58 30 49 89
RIP  [<ffffffffa03789cd>] nfs_lookup_revalidate+0x2d/0x480 [nfs]
  RSP <ffff8801b418bd38>
CR2: 0000000000000038
---[ end trace 845113ed191985dd ]---

This Oops affects 3.5 kernels and older, and is due to lookup_one_len()
calling down to the dentry revalidation code with a NULL pointer
to struct nameidata.

It is fixed upstream by commit 0b728e1911c (stop passing nameidata *
to ->d_revalidate())

Reported-by: Richard Ems <richard.ems@cape-horn-eng.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: fix bug in legacy DNS resolver.

commit 8d96b10639fb402357b75b055b1e82a65ff95050 upstream.

The DNS resolver's use of the sunrpc cache involves a 'ttl' number
(relative) rather that a timeout (absolute).  This confused me when
I wrote
  commit c5b29f885afe890f953f7f23424045cdad31d3e4
     "sunrpc: use seconds since boot in expiry cache"

and I managed to break it.  The effect is that any TTL is interpreted
as 0, and nothing useful gets into the cache.

This patch removes the use of get_expiry() - which really expects an
expiry time - and uses get_uint() instead, treating the int correctly
as a ttl.

This fixes a regression that has been present since 2.6.37, causing
certain NFS accesses in certain environments to incorrectly fail.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: add get_uint for u32's

commit a007c4c3e943ecc054a806c259d95420a188754b upstream.

I don't think there's a practical difference for the range of values
these interfaces should see, but it would be safer to be unambiguous.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: nfs4_locku_done must release the sequence id

commit 2b1bc308f492589f7d49012ed24561534ea2be8c upstream.

If the state recovery machinery is triggered by the call to
nfs4_async_handle_error() then we can deadlock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: Show original device name verbatim in /proc/*/mount{s,info}

commit 97a54868262da1629a3e65121e65b8e8c4419d9f upstream.

Since commit c7f404b ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
device name reported back to userland.

nfs_path() always generates a trailing slash when the given dentry is
the root of an NFS mount, but userland may expect the original device
name to be returned verbatim (as it used to be). Make this
canonicalisation optional and change the callers accordingly.

[jrnieder@gmail.com: use flag instead of bool argument]
Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu>
Reference: http://bugs.debian.org/669314
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts

commit acce94e68a0f346115fd41cdc298197d2d5a59ad upstream.

In very busy v3 environment, rpc.mountd can respond to the NULL
procedure but not the MNT procedure in a timely manner causing
the MNT procedure to time out. The problem is the mount system
call returns EIO which causes the mount to fail, instead of
ETIMEDOUT, which would cause the mount to be retried.

This patch sets the RPC_TASK_SOFT|RPC_TASK_TIMEOUT flags to
the rpc_call_sync() call in nfs_mount() which causes
ETIMEDOUT to be returned on timed out connections.

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix SSID copy on IBSS JOIN

commit badecb001a310408d3473b1fc2ed5aefd0bc92a9 upstream.

The 'ssid' field of the cfg80211_ibss_params is a u8 pointer and
its length is likely to be less than IEEE80211_MAX_SSID_LEN most
of the time.

This patch fixes the ssid copy in ieee80211_ibss_join() by using
the SSID length to prevent it from reading beyond the string.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
[rewrapped commit message, small rewording]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: check management frame header length

commit 4a4f1a5808c8bb0b72a4f6e5904c53fb8c9cd966 upstream.

Due to pskb_may_pull() checking the skb length, all
non-management frames are checked on input whether
their 802.11 header is fully present. Also add that
check for management frames and remove a check that
is now duplicate. This prevents accessing skb data
beyond the frame end.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>