chenxing [Fri, 10 May 2013 09:15:15 +0000 (17:15 +0800)]
rk3188: plus: add power on pll
chenxing [Fri, 10 May 2013 02:22:13 +0000 (10:22 +0800)]
rk: pm_tests: add delayline support
陈金泉 [Thu, 9 May 2013 13:16:21 +0000 (21:16 +0800)]
fix codec set init error
wuhao [Thu, 9 May 2013 08:11:04 +0000 (16:11 +0800)]
rk616 codec: modify power up and down
yxj [Thu, 9 May 2013 07:53:27 +0000 (15:53 +0800)]
mfd:rk616:vif:fix rk616 set vif
yxj [Thu, 9 May 2013 07:43:32 +0000 (15:43 +0800)]
board jettaplus defconfig:add lvds config
yxj [Thu, 9 May 2013 06:21:50 +0000 (14:21 +0800)]
rk3188m tb board:config rk616 lvds
chenxing [Thu, 9 May 2013 06:37:27 +0000 (14:37 +0800)]
rk30xx/rk3168/rk3188: dvfs: nandc delayline break lock status to make sure every time relock
陈金泉 [Thu, 9 May 2013 04:13:26 +0000 (12:13 +0800)]
add setting codec from parameter
wuhao [Thu, 9 May 2013 02:57:29 +0000 (10:57 +0800)]
rk616 codec: adjust the code
yxj [Thu, 9 May 2013 02:41:07 +0000 (10:41 +0800)]
mfd:rk616:vif:disable vif when hdmi remove
yxj [Thu, 9 May 2013 01:10:57 +0000 (09:10 +0800)]
rk3066b lcdc:fix vif support
Zhaoyifeng [Thu, 9 May 2013 02:02:49 +0000 (10:02 +0800)]
MTD:MTD MERGE READ AND WRITE FOR ONE REQ(MAX SIZE 1024KB). ZYF
yxj [Wed, 8 May 2013 13:11:25 +0000 (21:11 +0800)]
board jettaplus:set vcc_io to 3.2v to fix spdif
yxj [Wed, 8 May 2013 13:10:46 +0000 (21:10 +0800)]
screen:lcd b101ew05:fix vif support
yxj [Wed, 8 May 2013 13:10:05 +0000 (21:10 +0800)]
mfd:rk616:hdmi:modify vif set interface
yxj [Wed, 8 May 2013 13:09:10 +0000 (21:09 +0800)]
rk30 rk3188 lcdc:fix vif support
yxj [Wed, 8 May 2013 13:08:29 +0000 (21:08 +0800)]
rk screen:fix vif support
yxj [Wed, 8 May 2013 13:06:46 +0000 (21:06 +0800)]
mfd:rk616:vif:support hdmi only mode
chenxing [Wed, 8 May 2013 11:32:01 +0000 (19:32 +0800)]
rk: pm_test: add maxfreq operation support
wuhao [Wed, 8 May 2013 11:06:12 +0000 (19:06 +0800)]
rk616 codec: optimize the playback, capture processes, to reduce power consumption
陈金泉 [Wed, 8 May 2013 08:50:54 +0000 (16:50 +0800)]
fix codec pop noise
黄涛 [Wed, 8 May 2013 08:17:54 +0000 (16:17 +0800)]
rk3188: add delayline support again
chm [Wed, 8 May 2013 06:18:00 +0000 (14:18 +0800)]
vpu_service: add reg_size check on reg_init
陈金泉 [Tue, 7 May 2013 13:20:37 +0000 (21:20 +0800)]
change for 3188-m codec controls
xxh [Tue, 7 May 2013 12:35:01 +0000 (20:35 +0800)]
1.fix Vodafone K4505 3G dongle USB switch faild
2.Add more VID PID for option driver
xxx [Tue, 7 May 2013 10:02:40 +0000 (18:02 +0800)]
rk3168: uart\sdmmc 48M
yzq [Tue, 7 May 2013 09:35:41 +0000 (17:35 +0800)]
mfd:rk616 hdmi: use vif rebuild signal for hdmi 1080p
yxj [Tue, 7 May 2013 09:26:12 +0000 (17:26 +0800)]
mdf:rk616:vif:set mclk to 12M when vif on
xxx [Tue, 7 May 2013 09:17:31 +0000 (17:17 +0800)]
board-rk3168-tb.c use default pll rate
许盛飞 [Tue, 7 May 2013 08:42:36 +0000 (16:42 +0800)]
charging-displasy: when mode_normal and mode_charge
yxj [Tue, 7 May 2013 08:05:31 +0000 (16:05 +0800)]
mdf:rk616:vif:add vif set for hdmi
yxj [Fri, 3 May 2013 04:24:37 +0000 (12:24 +0800)]
lcd b101uano:support rk616 dual lvds
yxj [Fri, 3 May 2013 04:22:54 +0000 (12:22 +0800)]
mfd:rk616:vif:fix dual lvds support
xxx [Tue, 7 May 2013 06:58:05 +0000 (14:58 +0800)]
remove pm.c rk3188/clock_data.c pirntk
xxx [Tue, 7 May 2013 06:51:45 +0000 (14:51 +0800)]
add uart\sdmmc 48M supporting
黄涛 [Tue, 7 May 2013 06:14:34 +0000 (14:14 +0800)]
Revert "rk3188 plus: add delay line support"
This reverts commit
24903a6bd082bea5d7fb9ce030c72d5feff23a1b.
yzq [Tue, 7 May 2013 03:42:27 +0000 (11:42 +0800)]
rk spdif: support
xxx [Tue, 7 May 2013 03:09:49 +0000 (11:09 +0800)]
cpll\DPLL is not power dn,if rk_pll_flag!=0
chenxing [Tue, 7 May 2013 02:02:28 +0000 (10:02 +0800)]
rk3188 plus: add delay line support
cym [Tue, 7 May 2013 01:42:31 +0000 (09:42 +0800)]
rk3188 plus:add DDR support for rk3188 plus
yzq [Mon, 6 May 2013 13:05:03 +0000 (21:05 +0800)]
Revert "rk3188: spdif support"
This reverts commit
20b654aab5ddc3650aa3bb7d8f5359c43df8567d.
chenxing [Mon, 6 May 2013 13:00:17 +0000 (21:00 +0800)]
rk3188: redefine the interface of getting pll flag
chenxing [Mon, 6 May 2013 10:05:03 +0000 (18:05 +0800)]
rk3188 plus: fix PLUS_PLL_NF_MSK error
xxx [Mon, 6 May 2013 09:45:58 +0000 (17:45 +0800)]
edit div_clk_for_pll_int
陈金泉 [Mon, 6 May 2013 09:06:56 +0000 (17:06 +0800)]
change for route HPOUT playback
chenxing [Mon, 6 May 2013 08:11:00 +0000 (16:11 +0800)]
rk3188 plus: fix PLUS_PLL_NR calc error
kfx [Mon, 6 May 2013 08:06:17 +0000 (16:06 +0800)]
rk30+: fixed i2c_sram bug: (~(con & type)) --> (!(con &type))
yzq [Mon, 6 May 2013 06:22:00 +0000 (14:22 +0800)]
mfd:rk616 hdmi:fix irq respond err
黄涛 [Mon, 6 May 2013 06:55:12 +0000 (14:55 +0800)]
rk3168: cpufreq: check temperature every 1s when in performance mode
黄涛 [Mon, 6 May 2013 05:07:23 +0000 (13:07 +0800)]
rk: efuse: efuse_readregs return the number of bytes read when success
黄涛 [Mon, 6 May 2013 04:07:22 +0000 (12:07 +0800)]
rk: add common efuse support
cym [Mon, 6 May 2013 03:26:24 +0000 (11:26 +0800)]
RK3188:ddr_get_dpll_status only use for RK3188
zsq [Mon, 6 May 2013 00:18:58 +0000 (08:18 +0800)]
fix wake up interrupt error/flag error
cym [Sat, 4 May 2013 09:24:30 +0000 (17:24 +0800)]
rk3188: DDR clock add gpll instead dpll support
luowei [Sat, 4 May 2013 09:24:02 +0000 (17:24 +0800)]
sensor:improve kxtik driver compatibility
gwl [Sat, 4 May 2013 09:16:21 +0000 (17:16 +0800)]
add rtl8189es wifi support.
chenxing [Sat, 4 May 2013 09:08:05 +0000 (17:08 +0800)]
rk3188: add gpll instead cpll/dpll support
chenxing [Sat, 4 May 2013 09:07:05 +0000 (17:07 +0800)]
rk: dvfs fix round bug
chenxing [Sat, 4 May 2013 08:51:19 +0000 (16:51 +0800)]
rk3188: add efuse memory map support
wdc [Sat, 4 May 2013 03:50:50 +0000 (11:50 +0800)]
add rda587x device register
wdc [Sat, 4 May 2013 03:46:48 +0000 (11:46 +0800)]
760: remove rfkill-rf config
wdc [Sat, 4 May 2013 02:12:08 +0000 (10:12 +0800)]
rda5876 bt: update driver for android4.2
chm [Sat, 4 May 2013 01:55:01 +0000 (09:55 +0800)]
vpu_service: fix huawei debug signal error
陈金泉 [Fri, 3 May 2013 08:46:37 +0000 (16:46 +0800)]
fix set register error
kfx [Fri, 3 May 2013 02:17:25 +0000 (10:17 +0800)]
rk3188: rk3188m_tb support
yxj [Thu, 2 May 2013 03:43:41 +0000 (11:43 +0800)]
mfd:rk616:core:power ctrl after mclk in
yxj [Thu, 2 May 2013 03:33:05 +0000 (11:33 +0800)]
rk616:add lvds suspend support
张晴 [Thu, 2 May 2013 08:30:48 +0000 (16:30 +0800)]
rk30:modify i2c_sram for debug
张晴 [Thu, 2 May 2013 07:52:58 +0000 (15:52 +0800)]
ricoh619:modify charge limit current
yzq [Thu, 2 May 2013 07:10:17 +0000 (15:10 +0800)]
mfd:rk616 hdmi:fix hdmi err when resume supplement
yzq [Thu, 2 May 2013 06:31:42 +0000 (14:31 +0800)]
mfd:rk616 hdmi:fix hdmi err when resume
邱建斌 [Thu, 2 May 2013 03:19:56 +0000 (11:19 +0800)]
i2s : fix restart i2s dma cannot read/write data.
chenxing [Thu, 2 May 2013 01:16:54 +0000 (09:16 +0800)]
rk3188 plus: add clock support
陈金泉 [Sun, 28 Apr 2013 10:11:32 +0000 (18:11 +0800)]
add controls for codec
yzq [Sun, 28 Apr 2013 10:05:05 +0000 (18:05 +0800)]
mfd:rk616 hdmi: add spdif source select
yzq [Sun, 28 Apr 2013 09:47:53 +0000 (17:47 +0800)]
rk3188: spdif support
cym [Sun, 28 Apr 2013 08:39:26 +0000 (16:39 +0800)]
RK3188:ddr_freq_mode add DDR_FREQ_DUALVIEW for HDMI
yxj [Sun, 28 Apr 2013 08:40:07 +0000 (16:40 +0800)]
mfd:rk616:vif:support lcd0-->scaler-->lvds lcd0-->vif-->hdmi-->scaler-->lvds
yxj [Sun, 28 Apr 2013 04:20:18 +0000 (12:20 +0800)]
board jettaplus:modify rk616 power on timing
yxj [Sun, 28 Apr 2013 04:18:56 +0000 (12:18 +0800)]
lcdc:rename CONFIG_RK616_LVDS to CONFIG_RK616_VIF
yxj [Sun, 28 Apr 2013 03:26:11 +0000 (11:26 +0800)]
mfd:rk616:vif:support dual display and scaler
yxj [Sun, 28 Apr 2013 03:25:14 +0000 (11:25 +0800)]
mfd:rk616:hdmi:rename debug node as hdmi
yxj [Sun, 28 Apr 2013 03:21:34 +0000 (11:21 +0800)]
top board jettaB defconfig:set dual lcdc dual display
yxj [Sun, 28 Apr 2013 03:20:10 +0000 (11:20 +0800)]
screen :lcdb101ew05:support scaler on rk616
yxj [Sun, 28 Apr 2013 03:17:36 +0000 (11:17 +0800)]
rk fb:support one lcdc dual dispaly on rk616
黄涛 [Sun, 28 Apr 2013 03:41:28 +0000 (11:41 +0800)]
Revert "rk: Kconfig add SOC_RK3188M and MACH_RK3188M_TB support"
This reverts commit
236f35c0891c7fbc16571f948d59d1db7766a88d.
hwg [Sat, 27 Apr 2013 14:09:28 +0000 (22:09 +0800)]
mt6622: adjust uart0 clock for swflow
黄涛 [Sat, 27 Apr 2013 10:51:35 +0000 (18:51 +0800)]
rk: Kconfig add SOC_RK3188M and MACH_RK3188M_TB support
chenxing [Sat, 27 Apr 2013 10:08:42 +0000 (18:08 +0800)]
rk3168: 86v: add avs print support
chenxing [Sat, 27 Apr 2013 10:07:01 +0000 (18:07 +0800)]
rk3168: add avs print support
chenxing [Sat, 27 Apr 2013 09:18:27 +0000 (17:18 +0800)]
add rk3188 avs print support
You need to add operation in your vdd_core init as follows:
// set vdd_log = 1.1V;
avs_init_val_get(1,
1100000, "PMIC init");
陈金泉 [Sat, 27 Apr 2013 08:39:59 +0000 (16:39 +0800)]
add shutdown for codec power down pop noise
张晴 [Sat, 27 Apr 2013 07:45:44 +0000 (15:45 +0800)]
ricoh619:support pmic ricoh619
yxj [Sat, 27 Apr 2013 03:41:54 +0000 (11:41 +0800)]
rk30 lcdc:init screen0
yxj [Sat, 27 Apr 2013 03:39:38 +0000 (11:39 +0800)]
rk fb:reset fb parameters in fb close
yxj [Fri, 26 Apr 2013 09:23:01 +0000 (17:23 +0800)]
rk hdmi:add fps
yxj [Fri, 26 Apr 2013 03:58:36 +0000 (11:58 +0800)]
rk3188 lcdc:make sure turn off dither for 24bit display device
cym [Sat, 27 Apr 2013 01:30:57 +0000 (09:30 +0800)]
RK3188:ENABLE_DDR_CLCOK_GPLL_PATH,curtail idle_port and
disable fiq/irq time when change_ddr_freq
lyz [Wed, 24 Apr 2013 09:56:24 +0000 (17:56 +0800)]
usb: fix bug: no response to zero length out control request