chenxing [Mon, 24 Jun 2013 03:32:32 +0000 (11:32 +0800)]
rk3188: uboot display support; use support_uboot_display to get status
xuhuicong [Sat, 22 Jun 2013 08:06:34 +0000 (16:06 +0800)]
hdmi: cat66121: set i2s freq 44.1k to fix sound too small on some tv
xuhuicong [Sat, 22 Jun 2013 07:41:46 +0000 (15:41 +0800)]
hdmi: rk616
release work queue and disable irq in rk616_hdmi_shutdown
to avid panic when shutdown
xuhuicong [Sat, 22 Jun 2013 05:55:54 +0000 (13:55 +0800)]
battery: cw2015: add wakeup system when capacity is 0 and Resolve some bug
黄涛 [Fri, 21 Jun 2013 10:04:24 +0000 (18:04 +0800)]
rk3188: cpufreq version 2.1
fix over thermal throttle when some cpu is offline
more throttle when 4 cpus run on rk3188
support rk3188m
黄涛 [Fri, 21 Jun 2013 10:00:47 +0000 (18:00 +0800)]
rk3188m: add SOC_RK3188M config
chenxing [Fri, 21 Jun 2013 09:14:33 +0000 (17:14 +0800)]
rk292x: support set_rate_even div = 1
chenxing [Fri, 21 Jun 2013 09:14:21 +0000 (17:14 +0800)]
rk3066: support set_rate_even div = 1
chenxing [Fri, 21 Jun 2013 09:14:11 +0000 (17:14 +0800)]
rk3066B: support set_rate_even div = 1
chenxing [Fri, 21 Jun 2013 09:09:51 +0000 (17:09 +0800)]
rk3188: support set_rate_even div = 1
chenxing [Fri, 21 Jun 2013 06:21:09 +0000 (14:21 +0800)]
rk3066B: rk3028: efuse support
chenxing [Fri, 21 Jun 2013 06:20:56 +0000 (14:20 +0800)]
rk3066B: add EFUSE BASE support
hhb [Fri, 21 Jun 2013 06:17:32 +0000 (14:17 +0800)]
rk_screen.c add mipi config
hhb [Fri, 21 Jun 2013 03:36:05 +0000 (11:36 +0800)]
mipi dsi: add mipi lcd reference driver, lcd_LD089WU1_mipi.c
hhb [Fri, 21 Jun 2013 03:34:14 +0000 (11:34 +0800)]
mipi dsi: add new interfaces of dsi
luowei [Fri, 21 Jun 2013 03:20:23 +0000 (11:20 +0800)]
sensor:dmard10 use 4G range
陈金泉 [Fri, 21 Jun 2013 02:21:21 +0000 (10:21 +0800)]
Add sound card 1 for HDMI i2s, RK616 codec:add path for tiny alsa
luowei [Fri, 21 Jun 2013 01:58:22 +0000 (09:58 +0800)]
sensor:add gsensor dmard10 support
chenxing [Thu, 20 Jun 2013 10:03:11 +0000 (18:03 +0800)]
rk3188: fix uart0 init 49.5MHz error, set uart0 = 48MHz
lintao [Thu, 20 Jun 2013 08:52:48 +0000 (16:52 +0800)]
Wi-Fi:MT7601U select NL80211_TESTMODE
chm [Thu, 20 Jun 2013 07:39:55 +0000 (15:39 +0800)]
vpu_service: use dynamic chip detect for 3066 bus address bug
then binary file can be used for rk30xx and rk3188
yxj [Thu, 20 Jun 2013 03:12:32 +0000 (11:12 +0800)]
update LR097 defconfig
yxj [Tue, 18 Jun 2013 14:07:10 +0000 (22:07 +0800)]
HD screen:LP097QX1:set fps to 60
luowei [Wed, 19 Jun 2013 09:51:41 +0000 (17:51 +0800)]
sensor:add gyro ewtsa support
chenxing [Wed, 19 Jun 2013 09:34:25 +0000 (17:34 +0800)]
rk3066B/rk3168: Negative voltage diff support for rk3066B/rk3168
chenxing [Wed, 19 Jun 2013 09:31:06 +0000 (17:31 +0800)]
rk3066B: fix compiled error with mach-rk3188/cpufreq.c
luowei [Wed, 19 Jun 2013 08:59:03 +0000 (16:59 +0800)]
sensor:add layout control direction for ak8963
xxx [Wed, 19 Jun 2013 06:38:51 +0000 (14:38 +0800)]
it is not init ddr rate for testing ft
xxx [Wed, 19 Jun 2013 06:34:02 +0000 (14:34 +0800)]
edit ft_test.c for ft test
chenxing [Wed, 19 Jun 2013 03:57:30 +0000 (11:57 +0800)]
rk3188: dvfs: determine if clk is null
chenxing [Wed, 19 Jun 2013 03:14:52 +0000 (11:14 +0800)]
rk3188: dvfs: dvfs_adjust_table_lmtvolt determine whether variables are legitimate
chenxing [Wed, 19 Jun 2013 02:56:09 +0000 (10:56 +0800)]
rk3188: enable dvfs clk after adjust dvfs table
张晴 [Wed, 19 Jun 2013 02:48:19 +0000 (10:48 +0800)]
pmu:modify some warning and delay time
chenxing [Wed, 19 Jun 2013 02:07:53 +0000 (10:07 +0800)]
rk3188: auto calc delayline boundary
chenxing [Wed, 19 Jun 2013 02:07:15 +0000 (10:07 +0800)]
rk3188: efuse: use byte[22] bit[2] to ctrl leakage's effective
hwg [Tue, 18 Jun 2013 12:20:19 +0000 (20:20 +0800)]
mt6622: add rts control for hwflow
hwg [Tue, 18 Jun 2013 12:15:17 +0000 (20:15 +0800)]
mt6622 driver update to support 4.2
hwg [Tue, 18 Jun 2013 12:09:52 +0000 (20:09 +0800)]
solve usb buffer align problem to support usb tether(rndis)
hwg [Tue, 18 Jun 2013 12:07:20 +0000 (20:07 +0800)]
mt5931: disable roaming, driver version update to 2.14 for android 4.1
赵子初 [Tue, 18 Jun 2013 03:56:53 +0000 (11:56 +0800)]
update bp driver
zsq [Tue, 18 Jun 2013 01:37:07 +0000 (09:37 +0800)]
fix async flag error
chenxing [Fri, 14 Jun 2013 01:36:27 +0000 (09:36 +0800)]
rk3188: for version -t: ddr gpll path always on
chenxing [Mon, 17 Jun 2013 06:39:08 +0000 (14:39 +0800)]
rk3188: use leakage or delayline auto scale voltage
chenxing [Mon, 17 Jun 2013 06:37:52 +0000 (14:37 +0800)]
Revert "rk3188: use leakage or delayline auto scale voltage"
This reverts commit
576021075c4f2d6eb6a0735f316bff397f39ba5d.
chenxing [Mon, 17 Jun 2013 06:19:09 +0000 (14:19 +0800)]
rk3188: use leakage or delayline auto scale voltage
yxj [Mon, 17 Jun 2013 02:39:43 +0000 (10:39 +0800)]
screen:modify some screen config file for new screen framework
hhb [Fri, 14 Jun 2013 08:36:50 +0000 (16:36 +0800)]
mipi dsi: fix some warnning in rk616_mipi_dsi.c
hhb [Fri, 14 Jun 2013 08:00:08 +0000 (16:00 +0800)]
mipi: modify dsi framework and add rk616 mipi dis dirver
hhb [Fri, 14 Jun 2013 07:56:55 +0000 (15:56 +0800)]
dma: change module init from module_init to arch_initcall_sync
邱建斌 [Fri, 14 Jun 2013 07:00:32 +0000 (15:00 +0800)]
i2s : Set drive current depend rk3168 && rk3188
yxj [Fri, 14 Jun 2013 04:57:55 +0000 (12:57 +0800)]
upadte rk3066、jettaplus、rk618、rk3188、rk3188m defconfig
yxj [Fri, 31 May 2013 06:36:21 +0000 (14:36 +0800)]
rk30、rk3066b、rk3188:lcdc: do not call ssreen_set
yxj [Fri, 31 May 2013 04:23:48 +0000 (12:23 +0800)]
rk2928 rk610 rk616 lvds:indepent from screen config file
yxj [Thu, 30 May 2013 08:08:34 +0000 (16:08 +0800)]
rk fb:add interface to get pixclock and primary screen
fix one lcdc dual output
yxj [Thu, 30 May 2013 04:16:40 +0000 (12:16 +0800)]
move screen、transmitter、tve to rockchip
screen:indepent from jetta scaler
screen private info indepent from rk_screen
邱建斌 [Thu, 13 Jun 2013 06:40:34 +0000 (14:40 +0800)]
i2s: add support samplerate up to 192K and support S32_LE
邱建斌 [Thu, 13 Jun 2013 06:35:26 +0000 (14:35 +0800)]
i2s:Set the default drive current 8ma
yxj [Thu, 13 Jun 2013 04:38:45 +0000 (12:38 +0800)]
board jettaplus:support rk618 sdk
yxj [Sat, 1 Jun 2013 04:01:40 +0000 (12:01 +0800)]
dual lvds screen b101uano:fix rk616 support
chenxing [Sun, 9 Jun 2013 10:15:42 +0000 (18:15 +0800)]
rk3188: for version -t codec, fix pll maybe unlock in clk_disable_unuse
xuhuicong [Sun, 9 Jun 2013 07:49:34 +0000 (15:49 +0800)]
battery: add usb chage support to cw2015 battery driver and some other improve
张晴 [Sun, 9 Jun 2013 07:23:15 +0000 (15:23 +0800)]
pmu:ricoh619&rk808:modify delay time when exit sleep
hwg [Sun, 9 Jun 2013 02:02:16 +0000 (10:02 +0800)]
solve usb ethernet align problem: method form box
chenxing [Sun, 9 Jun 2013 01:23:52 +0000 (09:23 +0800)]
rk3188: support uart 48M, use cpll=594M, gpll=768M
hwg [Sat, 8 Jun 2013 11:32:04 +0000 (19:32 +0800)]
modify cdc_ether for usb dma data align: support rtl8152B usb ethernet
CMY [Sat, 8 Jun 2013 08:32:21 +0000 (16:32 +0800)]
支持蓝牙LPM(broadcom)
张晴 [Sat, 8 Jun 2013 06:25:54 +0000 (14:25 +0800)]
ricoh619:ricoh619 pmu modify set mode and init reg
wuhao [Sat, 8 Jun 2013 02:43:29 +0000 (10:43 +0800)]
rk616 codec: spkout and hpout set max volume by macro
wuhao [Sat, 8 Jun 2013 02:28:26 +0000 (10:28 +0800)]
rk316m: sync frequency_table
hhb [Sat, 8 Jun 2013 02:25:35 +0000 (10:25 +0800)]
watch dog: change module laod level from module_init to subsys_initcall
xbw [Fri, 7 Jun 2013 09:03:20 +0000 (17:03 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
xbw [Fri, 7 Jun 2013 09:02:43 +0000 (17:02 +0800)]
board-wifi config error.
llj [Fri, 7 Jun 2013 06:56:21 +0000 (14:56 +0800)]
change u5501 modem usbport to 244
黄涛 [Fri, 7 Jun 2013 04:00:56 +0000 (12:00 +0800)]
sound: rk29: better config for i2s output Voltage
赵子初 [Fri, 7 Jun 2013 03:22:52 +0000 (11:22 +0800)]
update u7501
Cody Xie [Fri, 7 Jun 2013 02:57:05 +0000 (10:57 +0800)]
rk3188 LR097 : update defconfig
Cody Xie [Fri, 7 Jun 2013 02:44:55 +0000 (10:44 +0800)]
rk3188 ds1006h : defconfig remove CONFIG_CLK_SWITCH_TO_32K
黄涛 [Fri, 7 Jun 2013 01:55:00 +0000 (09:55 +0800)]
rk30/rk31: set gpu qos from 0xd to 9
kfx [Fri, 7 Jun 2013 00:33:57 +0000 (08:33 +0800)]
rk3188m: key: rk31xx mainboard support
黄涛 [Thu, 6 Jun 2013 11:33:19 +0000 (19:33 +0800)]
rk3066b: fix Kconfig warning: selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT)
黄涛 [Thu, 6 Jun 2013 11:29:54 +0000 (19:29 +0800)]
rk3168: add ft board
黄涛 [Thu, 6 Jun 2013 11:23:37 +0000 (19:23 +0800)]
rk30: common: fix compile error implicit declaration of function 'IS_ERR'
黄涛 [Thu, 6 Jun 2013 11:21:57 +0000 (19:21 +0800)]
rk: vpu_service: fix compile error when build without proc_fs support
wuhao [Thu, 6 Jun 2013 02:16:58 +0000 (10:16 +0800)]
rk616 codec: playback do not power up while hdmi is in
wuhao [Wed, 5 Jun 2013 10:53:22 +0000 (18:53 +0800)]
rk3168m: rk3168m: input i2s while hdmi display
wuhao [Wed, 5 Jun 2013 10:36:35 +0000 (18:36 +0800)]
rk616 codec :if do not config SPDIF,MCLK not fixed to 12M when hdmi is in
邱建斌 [Wed, 5 Jun 2013 03:56:59 +0000 (11:56 +0800)]
i2s : add config for i2s output Voltage(3.3v/1.8v)
yj [Wed, 5 Jun 2013 01:14:04 +0000 (09:14 +0800)]
rk616: add agc function
ddl [Tue, 4 Jun 2013 04:02:07 +0000 (12:02 +0800)]
camera uvc: urb buffer address must align to 4-bytes, for support white balance
xxx [Tue, 4 Jun 2013 06:50:36 +0000 (14:50 +0800)]
rk3188: add ft board
xxx [Tue, 4 Jun 2013 06:47:06 +0000 (14:47 +0800)]
rk: add ft test
陈金泉 [Tue, 4 Jun 2013 03:23:07 +0000 (11:23 +0800)]
rk616 codec:add reset in fun shutdown
黄涛 [Tue, 4 Jun 2013 02:45:30 +0000 (10:45 +0800)]
rk30-pwm-regulator: support rk3168m
黄涛 [Tue, 4 Jun 2013 02:44:31 +0000 (10:44 +0800)]
rk3168m: tb: defconfig select SOC_RK3168M
wuhao [Tue, 4 Jun 2013 02:33:32 +0000 (10:33 +0800)]
rk3188 ds1006: fix parameter charge on thc arm_pm_restart
wuhao [Tue, 4 Jun 2013 01:15:15 +0000 (09:15 +0800)]
rk3168m: spdif support
黄涛 [Mon, 3 Jun 2013 07:44:48 +0000 (15:44 +0800)]
rk: clock: dump cru register when panic
llj [Mon, 3 Jun 2013 06:49:36 +0000 (14:49 +0800)]
add u5501 modem
zsq [Mon, 3 Jun 2013 00:54:41 +0000 (08:54 +0800)]
fix rot 90 dst loss data bug
张晴 [Sat, 1 Jun 2013 08:02:55 +0000 (16:02 +0800)]
ricoh619:update the 619 drivers