Abylay Ospan [Wed, 16 Sep 2009 16:08:06 +0000 (13:08 -0300)]
V4L/DVB (12956): Fix gpio mutex in NetUP Dual DVB-S2 CI card.
The card uses the same cx23885 gpio lines for two adapters.
In case of there is several cards in system we must implement
gpio mutex per cx23885 chip.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Lorin [Tue, 15 Sep 2009 17:17:07 +0000 (14:17 -0300)]
V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams
- add the Genesys Logic 05e3:0503 and 05e3:f191 webcam
Signed-off-by: Olivier Lorin <o.lorin@laposte.net>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jean-Francois Moine [Thu, 3 Sep 2009 16:46:59 +0000 (13:46 -0300)]
V4L/DVB (12953): gspca - vc032x: Bad GPIO of the Samsung Q1 on start/stop streaming.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 15 Sep 2009 17:42:13 +0000 (14:42 -0300)]
V4L/DVB (12951): em28xx: add Reddo DVB-C USB TV Box
Support for Reddo DVB-C USB TV Box device. Remote is not working yet.
Thanks to Benjamin Larsson <banan@ludd.ltu.se>
Cc: Benjamin Larsson <banan@ludd.ltu.se>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 15 Sep 2009 17:37:20 +0000 (14:37 -0300)]
V4L/DVB (12950): tuner-simple: add Philips CU1216L
add Philips CU1216L NIM
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 15 Sep 2009 11:08:20 +0000 (08:08 -0300)]
V4L/DVB (12948): v4l1-compat: fix VIDIOC_G_STD handling
The VIDIOC_G_STD ioctl may not be present in the case of radio receivers.
In that case G_STD will return an error. The v4l1-compat layer should not
attempt to propagate that error to the caller, instead it should be
ignored.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Fri, 4 Sep 2009 02:46:16 +0000 (23:46 -0300)]
V4L/DVB (12946): SAA7164: Add support for a new HVR-2250 hardware revision
SAA7164: Add support for a new HVR-2250 hardware revision
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 29 Aug 2009 17:41:18 +0000 (14:41 -0300)]
V4L/DVB (12945): SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.
SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 29 Aug 2009 17:33:06 +0000 (14:33 -0300)]
V4L/DVB (12944): SAA7164: Minor i2c assignment cleanup
SAA7164: Minor i2c assignment cleanup
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 29 Aug 2009 17:22:05 +0000 (14:22 -0300)]
V4L/DVB (12943): SAA7164: Add a warning about addr usage
SAA7164: Remove meaningless if'0 code
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Thu, 27 Aug 2009 21:08:21 +0000 (18:08 -0300)]
V4L/DVB (12942): SAA7164: HVR2250 changes related to attach time tuner configuration
Ensure that by default all tuners are set correctly to master/slave mode.
For all HVR2250's, ensure slave based tuners are caliberated during attach
to avoid locking problems on tuner# above channel 91.
HVR2200 tuner attach time to be reviewed in a future patch.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Thu, 13 Aug 2009 00:12:32 +0000 (21:12 -0300)]
V4L/DVB (12941): SAA7164: Removed spurious debug
SAA7164: Removed spurious debug
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Wed, 12 Aug 2009 15:14:37 +0000 (12:14 -0300)]
V4L/DVB (12940): SAA7164: IRQ / message timeout related change
In some cases we're seeing large timeouts on commands. I'm changing the
implementation so that the deferred worker checks the PCI bus for
any messages and signals the waiting caller accordingly. The previous
mechanism was too unreliable.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Wed, 12 Aug 2009 15:06:27 +0000 (12:06 -0300)]
V4L/DVB (12939): SAA7164: Removed a duplicate call to address any PCI quirks.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 8 Aug 2009 13:22:02 +0000 (10:22 -0300)]
V4L/DVB (12938): SAA7164: Increase the firmware command timeout to avoid firmware errors.
The firmware typically responds in < 50ms and, via the interrupts and
deferred work queue the caller (blocked in the driver) is signalled very
efficiently. In a highly stressed system this can take many multiples
of seconds. So, we need a larger maximum timeout for busy systems.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 8 Aug 2009 13:13:51 +0000 (10:13 -0300)]
V4L/DVB (12937): SAA7164: Cleanup a printk
Cleanup a printk and output two helpful driver params in debug mode.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Thu, 30 Jul 2009 12:09:30 +0000 (09:09 -0300)]
V4L/DVB (12936): SAA7164: Added waitsecs module parameter
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 16 May 2009 00:13:32 +0000 (21:13 -0300)]
V4L/DVB (12935): SAA7164: Ensure we specify I/F's for all bandwidths
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Thu, 14 May 2009 04:15:15 +0000 (01:15 -0300)]
V4L/DVB (12934): SAA7164: Fix i2c eeprom read errors during load (some boards).
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Wed, 13 May 2009 05:53:08 +0000 (02:53 -0300)]
V4L/DVB (12933): SAA7164: Fix IRQ related system hang when firmware is not found.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Tue, 12 May 2009 19:20:37 +0000 (16:20 -0300)]
V4L/DVB (12932): SAA7164: Fixed the missing eeprom parse on a specific board.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Tue, 12 May 2009 01:03:07 +0000 (22:03 -0300)]
V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with production boards.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Tue, 12 May 2009 13:13:11 +0000 (10:13 -0300)]
V4L/DVB (12930): SAA7164: Removed spurious I2C errors during driver load with DVB-T boards.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Tue, 12 May 2009 01:16:05 +0000 (22:16 -0300)]
V4L/DVB (12929): SAA7164: OOPS avoidance during interrupt handling
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Mon, 11 May 2009 23:42:03 +0000 (20:42 -0300)]
V4L/DVB (12928): SAA7164: Increase firmware load tolerance
It's timing out and aborting firmware load too quickly on some
platforms, this increases the upper limit.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sun, 10 May 2009 17:08:27 +0000 (14:08 -0300)]
V4L/DVB (12927): SAA7164: Remove volatiles for PCI writes (coding style violation)
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sun, 10 May 2009 14:17:58 +0000 (11:17 -0300)]
V4L/DVB (12926): SAA7164: Email address change
SAA7164: Email address change
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sun, 10 May 2009 13:25:34 +0000 (10:25 -0300)]
V4L/DVB (12925): SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock
SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sun, 10 May 2009 00:30:05 +0000 (21:30 -0300)]
V4L/DVB (12924): SAA7164: Fix some 32/64bit compile time warnings
SAA7164: Fix some 32/64bit compile time warnings
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sun, 10 May 2009 00:17:28 +0000 (21:17 -0300)]
V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon
This patch adds support for all of the known shipping Hauppauge HVR-2200
and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this
time. Both tuners are supported.
Volatiles and typedefs need rework, the rest is coding style compliant.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Sat, 9 May 2009 16:24:12 +0000 (13:24 -0300)]
V4L/DVB (12922): Add the SAA7164 I2C bus identifier
Add the SAA7164 I2C bus identifier
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 17 Sep 2009 04:44:22 +0000 (01:44 -0300)]
V4L/DVB (12920): DocBook/media: Some xmlto or DTD's don't accept reference inside appendix
That was weird: on some distros, we need to remove <reference> tag
for it to work.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 17 Sep 2009 04:25:41 +0000 (01:25 -0300)]
V4L/DVB (12919): DocBook/media: fix some DocBook non-compliances
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 17 Sep 2009 02:56:44 +0000 (23:56 -0300)]
V4L/DVB (12917): DocBook/media: add V4L2_PIX_FMT_TM6000
This is a proprietary format found with Trident tm6000 series of
chipsets.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Thu, 17 Sep 2009 02:22:05 +0000 (23:22 -0300)]
V4L/DVB (12915): DocBook/media: Add isdb-t documentation
Adds ISDB-T_and_ISDB-Tsb_with_S2API spec converted into DocBook format.
The text is authored by Patrick Boettcher, and was converted to DocBook
by me.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Sep 2009 12:18:26 +0000 (09:18 -0300)]
V4L/DVB (12906): dib0700: Add support for Prolink SBTVD
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Mon, 17 Aug 2009 15:53:51 +0000 (12:53 -0300)]
V4L/DVB (12903): DiB8000: fix channel search parameter initialization
This patch is fixing the initialization of the channel search parameters.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Uwe Bugla [Mon, 17 Aug 2009 11:09:06 +0000 (08:09 -0300)]
V4L/DVB (12902): Documentation: synchronize documentation for Technisat cards
The patch does the following:
a. it synchronizes /Documentation/dvb/technisat.txt to the current kernel
design
b. it syncs Trent Piepho' s latest changes to the flexcop driver concept:
implementation of the dvb pll library for some cards that need it
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Wed, 16 Sep 2009 12:51:30 +0000 (09:51 -0300)]
V4L/DVB (12901): DiB0700: add support for STK807XP and STK807XPVR
This patchs adds support for the DiB8000 based devices STK807xP and
STK807xPVR to the dib0700-device-tree.
[mchehab@redhat.com: Fix merge conflicts]
Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Mon, 17 Aug 2009 10:01:10 +0000 (07:01 -0300)]
V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000
This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom.
Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Mon, 17 Aug 2009 08:13:28 +0000 (05:13 -0300)]
V4L/DVB (12899): DiB0070: Indenting driver with indent -linux
In order to follow a little bit the kernel coding style from now on
after the generation of that driver file and indent -linux call is
emitted.
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Mon, 3 Aug 2009 16:43:40 +0000 (13:43 -0300)]
V4L/DVB (12898): DiB0070: Update to latest internal release
General update of the dib0070-driver based on DiBcom's latest release.
New driver features can enable better performance in some reception situations.
Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Fri, 14 Aug 2009 08:24:19 +0000 (05:24 -0300)]
V4L/DVB (12896): ISDB-T: add mapping of LAYER_ENABLED to frontend-cache
It was forgotten to map the LAYER_ENABLED ioctl to the frontend-cache and back.
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Mon, 3 Aug 2009 17:39:15 +0000 (14:39 -0300)]
V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb (version 5.1)
This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API.
Changes in detail:
- added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel
- added necessary fields to dtv_frontend_cache
- added a smarter clear-cache function which resets all fields of the dtv_frontend_cache
- added a TRANSMISSION_MODE_4K to fe_transmit_mode_t
Signed-off-by: Olivier Grenie <olgrenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Sep 2009 00:50:59 +0000 (21:50 -0300)]
DocBook/media: Remove Satellites from Analog TV Tuners and Modulators
There were never any satellite support for analog, and adding it
right now doesn't make sense. For digital TV, this is already
covered at part II.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Sep 2009 00:03:45 +0000 (21:03 -0300)]
DocBook/media: update dvb url's and use ulink tag instead of emphasis
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 23:49:43 +0000 (20:49 -0300)]
DocBook/media: fix some broken links
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 23:27:18 +0000 (20:27 -0300)]
DocBook/media: Some typo fixes
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 22:49:44 +0000 (19:49 -0300)]
DocBook: Don't use graphics callouts
By default, when a callout is used, DocBook will try to use
a graphics image for callouts. This requires that the graphics
to be copied to the documentation directory. As this is not
done, use the text callouts: (1), (2), ...
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 21:46:15 +0000 (18:46 -0300)]
DocBook/media: copy also the pictures to the proper place
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 18:27:57 +0000 (15:27 -0300)]
DocBook/media: renamed xml documents to tmpl
DocBook makefile expects that the documents to be in tmpl extension,
since it has some preprocessing that it is done on it. This preprocessing
is not needed currently, but, as it removes the xml versions, we're
forced to rename anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Patrick Boettcher [Tue, 15 Sep 2009 10:16:51 +0000 (07:16 -0300)]
V4L/DVB (12889): DIB0700: added USB IDs for a Terratec DVB-T XXS
Since there is now correct support for the DiB7770 the support for the
'Terratec Cinergy T USB XXS (HD)' can be added.
One USB-ID has been moved, another one has been added.
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 15 Sep 2009 09:55:35 +0000 (06:55 -0300)]
V4L/DVB (12888): STK7770P: Add support for STK7770P
Added support for the dib7770P and the STK7770P
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 15 Sep 2009 09:46:52 +0000 (06:46 -0300)]
V4L/DVB (12887): DIB7000P: SNR calcuation forr DiB7000P
Add the SNR monitoring for the dib7000p. The result is in dB.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Wed, 2 Sep 2009 11:19:19 +0000 (08:19 -0300)]
V4L/DVB (12886): Added new Pinnacle USB devices
Added Pinnacle PCTV USB devices based on PCTV 73e.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 7 Sep 2009 17:32:45 +0000 (14:32 -0300)]
V4L/DVB (12884): cx18: Eliminate warning about discarding 'const' is assignment for IR init
i2c-kbd-i2c allows a bridge driver to pass information about IR configuration,
but uses a "void *" to pass along what is essentially constant data. This
change casts a const * to a void * to remove the warning.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 15 Sep 2009 03:20:29 +0000 (00:20 -0300)]
V4L/DVB (12882): em28xx: remove text editor tags from em28xx-vbi.c
Remove some emacs tags from em28xx-vbi.c, which were copied from cx88-vbi.c,
per Mauro Carvalho Chehab's request.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 15 Sep 2009 03:18:06 +0000 (00:18 -0300)]
V4L/DVB (12881): em28xx: fix codingstyle issues in em28xx-video.c
Fix some codingstyle issues introduced during the addition of em28xx VBI
support. The patch makes no functional changes other than converting a few
debug printk() statements to em28xx_isocdbg.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 15 Sep 2009 03:10:15 +0000 (00:10 -0300)]
V4L/DVB (12880): em28xx: fix codingstyle issues introduced with VBI support
Fix a few codingstyle issues introduced when I was adding the VBI support to
the em28xx driver.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Brian Kloppenborg [Sun, 30 Aug 2009 12:43:40 +0000 (09:43 -0300)]
V4L/DVB (12878): gspca - m5602-s5k4aa: Add vflip quirk for the GX700
The MSI GX700 is a tricky machine to support. Some revisions do need the sensor flipped, but not all.
Add another quirk, distinguished by its BIOS date.
Signed-off-by: Brian Kloppenborg <bkloppenborg@gmail.com>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Erik Andrén [Wed, 1 Jul 2009 05:49:23 +0000 (02:49 -0300)]
V4L/DVB (12877): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Pa 2548
Add vflip quirk for the Fujitsu Siemens Amilo Pa 2548
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 6 Sep 2009 17:11:09 +0000 (14:11 -0300)]
V4L/DVB (12875): cx23885: disable tda18271 slave tuner output / loop thru in standby mode
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 29 Aug 2009 20:47:01 +0000 (17:47 -0300)]
V4L/DVB (12874): pvrusb2: disable tda18271 slave tuner output / loop thru in standby mode
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 29 Aug 2009 20:45:48 +0000 (17:45 -0300)]
V4L/DVB (12873): saa7134: disable tda18271 slave tuner output / loop thru in standby mode
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Henk Vergonet [Tue, 15 Sep 2009 05:25:35 +0000 (02:25 -0300)]
V4L/DVB (12871): tda18271: fix bad data in tda18271_cid_target table
Fixed one value and removed a duplicate in tda18271_cid_target[],
based on table 54 "CID_Target_map" in Rev.04 of the TDA18271HD datasheet.
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Henk Vergonet [Tue, 15 Sep 2009 05:09:17 +0000 (02:09 -0300)]
V4L/DVB (12870): tda18271: update temperature compensation calculatation formula
Update the tda18271c2_rf_tracking_filters_correction function to include
the modified temperature compensation calculatation formula as described
in Rev.04 of the TDA18271HD datasheet.
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 6 Sep 2009 17:38:48 +0000 (14:38 -0300)]
V4L/DVB (12869): tda18271: fix comments and make tda18271_agc debug less verbose
Don't display "no agc configuration provided" unless DBG_ADV is set.
Fix comments in function, tda18271_agc. This config variable is not
for LNA configuration -- it is for external AGC configuration.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 5 Sep 2009 22:01:56 +0000 (19:01 -0300)]
V4L/DVB (12868): tda18271: improve error log in function tda18271_write_regs
Display function parameters, idx and len, in error log.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 30 Aug 2009 06:07:10 +0000 (03:07 -0300)]
V4L/DVB (12867): tda18271: ensure that configuration options are set for multiple instances
For the case of multiple tuner instances, ensure that non-default
configuration options are saved into the driver's state.
This resolves an issue where a configuration option may not be
carried into the driver if the analog side of a hybrid driver
initializes before the digital side.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 30 Aug 2009 05:32:23 +0000 (02:32 -0300)]
V4L/DVB (12866): tda18271: move small_i2c assignment to the state config block
minor cleanup: move small_i2c assignment to the state config block
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 29 Aug 2009 19:27:21 +0000 (16:27 -0300)]
V4L/DVB (12865): tda18271: move tda18271_sleep directly below tda18271_init
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sat, 29 Aug 2009 19:25:37 +0000 (16:25 -0300)]
V4L/DVB (12864): tda18271: change output feature configuration to a bitmask
For better readability, treat the low power standby mode configuration
as an output option feature configuration, and change it to a bitmask.
If left unconfigured, all features will remain enabled, just as the
default configuration was before these changes were introduced.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Fri, 28 Aug 2009 23:53:30 +0000 (20:53 -0300)]
V4L/DVB (12863): tda18271: add new standby mode: slave tuner output / loop thru on
Add new standby mode:
TDA18271_STANDBY_LT_ON = slave tuner output loop thru on w/ xtal osc off
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Fri, 28 Aug 2009 21:52:26 +0000 (18:52 -0300)]
V4L/DVB (12862): tda18271: add debug to show which standby mode is in use
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 11 May 2008 15:46:52 +0000 (12:46 -0300)]
V4L/DVB (12861): tda18271: add support for additional low-power standby modes
By default, the driver enters standby mode with slave tuner output
loop thru enabled and xtal oscillator on.
Not all designs require that slave tuner output loop thru and
xtal oscillator remain active while in standby mode, so two
additional standby modes have been added:
- standby mode with xtal oscillator on (loop thru off)
- total power off
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 14:07:59 +0000 (11:07 -0300)]
V4L/DVB (12859): go7007: semaphore -> mutex conversion
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 14:06:04 +0000 (11:06 -0300)]
V4L/DVB (12858): go7007: whitespacing cleanups
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 19:36:54 +0000 (16:36 -0300)]
V4L/DVB (12851): cx25821/Makefile: Cleanup
Remove an extra line that it is not needed
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 16:03:43 +0000 (13:03 -0300)]
V4L/DVB (12847): cx25821: Add README with todo list
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Sep 2009 01:16:04 +0000 (22:16 -0300)]
V4L/DVB (12761): DocBook: add media API specs
The V4L and DVB API's are there for a long time. however, up to now,
no efforts were done to merge them to kernel DocBook.
This patch adds the current versions of the specs as an unique compendium.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 13 Sep 2009 00:25:59 +0000 (21:25 -0300)]
V4L/DVB (12756): af9015: fix typo in register compare
And mask should be 0xff00 instead of 0xae00.
Thanks to Jochen Friedrich <jochen@scram.de> for pointing this.
Cc: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 12 Sep 2009 23:46:30 +0000 (20:46 -0300)]
V4L/DVB (12755): af9015: improve usb control message function slightly
* define names for few values
* decrease buffer len by one byte which was not used
* add check for buffer overflow for sure
* indentation fixes
* remove useless 0 len check from memcpy
It should not happen and if it happens memcpy should not do anything.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 12 Sep 2009 16:35:29 +0000 (13:35 -0300)]
V4L/DVB (12754): af9015: [2/2] fix USB TS configuration
Fix wrongly configured USB1.1 TS EP.
Patch serie also increases USB URB size to reduce wakeups.
USB1.1 URB size from 64 to 940 bytes
USB2.0 URB size from 512 to 16356 bytes
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Jose Alberto Reguero [Sat, 12 Sep 2009 12:51:36 +0000 (09:51 -0300)]
V4L/DVB (12753): af9015: [1/2] fix USB TS configuration
Fix wrongly configured USB2.0 TS EP.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 12 Sep 2009 12:43:25 +0000 (09:43 -0300)]
V4L/DVB (12752): get_dvb_firmware: add af9015 firmware
Add af9015 firmware to get_dvb_firmware script.
Firmware version is 4.95.0.0.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Fri, 11 Sep 2009 03:53:44 +0000 (00:53 -0300)]
V4L/DVB (12750): em28xx: fix unused variable warning
Remove unused variable from when I introduced the g_std() function.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Fri, 11 Sep 2009 03:51:48 +0000 (00:51 -0300)]
V4L/DVB (12749): em28xx: remove unneeded code that set VINCTRL register
Remove redundant call to set the vinctrl register. This eliminates any
ambiguity as to how the register is configured (since it is now always set in
em28xx_set_outfmt).
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Fri, 11 Sep 2009 03:40:18 +0000 (00:40 -0300)]
V4L/DVB (12748): em28xx: implement g_std v4l call
We need to implement the g_std call, or else the default norm always gets
returned, which breaks VBI capturing if you had changed the standard to NTSC
using s_std.
I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc
wouldn't choke, so now that we are returning the correct value, switch it back
to PAL as the default.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Fri, 11 Sep 2009 03:08:44 +0000 (00:08 -0300)]
V4L/DVB (12747): em28xx: only advertise VBI capability if supported
Change the code so we only claim to support VBI if the underlying chipset
actually has the support.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Fri, 11 Sep 2009 03:01:06 +0000 (00:01 -0300)]
V4L/DVB (12746): em28xx: do not create /dev/vbiX device if VBI not supported
Do not create the VBI device in cases where VBI is not supported on the target
em28xx chip.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 3 Sep 2009 03:25:54 +0000 (00:25 -0300)]
V4L/DVB (12745): em28xx: remove unreferenced variable
Remove an unreferenced variable introduced during the VBI introduction.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 3 Sep 2009 03:23:27 +0000 (00:23 -0300)]
V4L/DVB (12744): em28xx: restructure fh/dev locking to handle both video and vbi
The current locking infrastructure didn't support having multiple fds accessing
the device (such as video and vbi). Rework the locking infrastructure,
borrowing the design from cx88.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Thu, 3 Sep 2009 01:23:23 +0000 (22:23 -0300)]
V4L/DVB (12743): em28xx: fix mmap_mapper with vbi
When adding support for both video and VBI, I missed the mmap ioctl. Add
the missing call.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 1 Sep 2009 04:54:54 +0000 (01:54 -0300)]
V4L/DVB (12742): em28xx: add raw VBI support for NTSC
Add support for raw VBI capture for the em28xx bridge, currently only for
NTSC. Support for PAL capture to follow shortly (including the removal of
numerous hard-coded NTSC-specific sizes for capture buffers, etc).
Note that the code currently changes the default current norm from PAL to
NTSC (so that zvbi-ntsc-cc works properly). The default norm really should
be moved into a board-level parameter.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 1 Sep 2009 04:19:46 +0000 (01:19 -0300)]
V4L/DVB (12741): em28xx: make video isoc stream work when VBI is enabled
Add code enabling the VBI registers for variants of the em28xx chip that
support VBI, and make sure the isoc streaming code continues to work for
the video component of the stream (note the video and vbi data arrive
intermixed on the same isoc pipe).
Note that this version just drops the actual VBI data onto the floor as
opposed to processing it. The "#ifdef 0" tags are for the videobuf code that
appears in the next patch in this series.
We created a separate version of the isoc_copy version for parsing the version
of the stream that includes VBI data. In theory, they might be able to be
merged at some point in the future, but the initial goal is to ensure that we
do not cause any regressions with devices that do not have VBI support.
This work was sponsored by EyeMagnet Limited.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Devin Heitmueller [Tue, 1 Sep 2009 02:23:03 +0000 (23:23 -0300)]
V4L/DVB (12740): em28xx: better describe vinctrl registers
Properly document the video input control register, in preparation for the
addition of VBI support. Note this patch makes no functional changes.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Sep 2009 15:15:15 +0000 (12:15 -0300)]
cx25821: Add driver to the building system
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 13 Sep 2009 14:39:12 +0000 (11:39 -0300)]
V4L/DVB (12734): cx25821: Fix some compilation troubles
Lindent caused some compilation breakages. There were also others
related to some other changes at kernel KABI.
There's still one missing warning fix against 2.6.30:
/home/v4l/cx25821/v4l/cx25821-alsa.c: In function 'cx25821_audio_initdev':
/home/v4l/cx25821/v4l/cx25821-alsa.c:706: warning: 'snd_card_new' is deprecated (declared at include/sound/core.h:306)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 13 Sep 2009 14:30:11 +0000 (11:30 -0300)]
V4L/DVB (12733): cx25821: some CodingStyle fixes
The original driver were generated with some dos editor, and used their
own coding style.
This patch does some automatic CodingStyle fixes, by running dos2unix
and Lindent tools.
More work still needs to be done for it to use upstream CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 13 Sep 2009 14:25:45 +0000 (11:25 -0300)]
V4L/DVB (12732): cx25821: fix bad whitespacing
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / firefly-linux-kernel-4.4.55.git / log