rk3368: iommu: fix 32bit iommu work error in 64bit kernel

unsigned long has 8bytes in 64bit kernel,Maybach iommu each entry
both dte and pte has 4bytes,so we can not use unsigned long type
to define the entry address,otherwise,wrong page table will be set up,
that will cause page fault.So,replace unsigned long with unsigned int to
define the entry address

Signed-off-by: Simon <xxm@rock-chips.com>

rk3368 codec : add support for codec es8316

Signed-off-by: smj <smj@rock-chips.com>

rk3368: p9_dts: add lcd_en delay time

rk3368 lcdc: fix fbdc addr config error

Signed-off-by: hjc <hjc@rock-chips.com>

rk: ion: allow the cacheable buffer to map iommu

Signed-off-by: CMY <cmy@rock-chips.com>

HDMI:
1. In DVI mode, input color and output color should be RGB[0-255];
   In HDMI mode, input color should be YCbCr;
2. For MID, HDMI is default disabled.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

hdmi: hdmiv1:
For nlpcm bitstream mode, we need to set audio
channel status nlpcm bit to 1.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

hdmi: fix set hdmi switch state error when remove hdmi.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

rk3368 lcdc: inter bak register will lead to clear
    other inter status, so when we clear inter inter
    status we should set clear register to zero.

Signed-off-by: hjc <hjc@rock-chips.com>

rk31xx lvds: set clock lane enable int ttl mode

Signed-off-by: hjc <hjc@rock-chips.com>

rk_sdmmc: speed up MMC for 3368

   Test with p9-818 board, without DM for ext4 mount option.

Signed-off-by: lintao <lintao@rock-chips.com>

rk fb: if uboot-logo-on set 1, open iommu when iommu en

Signed-off-by: hjc <hjc@rock-chips.com>

rk31xx lvds: ttl mode test ok

Signed-off-by: hjc<hjc@rock-chips.com>

rk3368 lcdc: overlay mode depend on screen color mode

Signed-off-by: hjc<hjc@rock-chips.com>

rk: ion: assign sg's dma_length in ion allocation if CONFIG_NEED_SG_DMA_LENGTH is set

ARM64: dma-mapping: zero the buffer that allocate with __GFP_ZERO flags

Merge branch 'develop-3.10-next' of 10.10.10.29:rk/kernel into develop-3.10-next

ARM64: dts: act8846: ldo5 output 3.0v

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

Merge branch develop-3.10

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
Conflicts:
drivers/video/rockchip/rk_fb.c

dts: rk3368.dtsi:add remotectl; add rk3368-box.dts

power: reset: rockchip-reboot: rk3368 support reboot with argument

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

rk3368-tb_8846.dts support wifi

rfkill-wlan.c: support rk3368

update rkwifi bcmdhd to version 1.201.34.1

update rtl8188eu wifi driver to RTL8188EUS_linux_v4.3.0.7_12758.20141114

usb: dwc_otg: show warning on actual buffer length larger than
transfer buffer length

In this case DWC_OTG controller will over-write memory space that
not belongs to this urb, it may cause kernel crash.

Signed-off-by: lyz <lyz@rock-chips.com>

usb: ehci: fix test packet mode

When enter usb test packet mode the device no longer connect
normally, so stop the connect detect timer

Signed-off-by: lyz <lyz@rock-chips.com>

usb: dwc_otg: add condition judgement to filter invalid
disconnect interrupt

In some case, we disconnect a usb device, then usb controller
will trigger more the one disconnect interrupt, so check port
enable change bit in hprt0 to make sure just one disconnect
interrupt be handled.
here to

Signed-off-by: lyz <lyz@rock-chips.com>

usb: ehci-rockchip: fix typo

'work around' should be 'walk around'

Signed-off-by: lyz <lyz@rock-chips.com>

usb: rk3368: support wake up by usb plug

Signed-off-by: lyz <lyz@rock-chips.com>

usb: rk3368: support usb battery charger detect

Signed-off-by: lyz <lyz@rock-chips.com>

rockchip_defconfig: add generic EHIC and OHCI platform driver

rk31xx lvds: update config for VOCM and VDIFF

Signed-off-by: hjc <hjc@rock-chips.com>

rk fb: fix screen info error when in no dual mode and pull out hdmi

Signed-off-by: hjc <hjc@rock-chips.com>

rk31xx lvds: fix lvds grf config error when disable lvds

rk3368 mipi: modified the bug of dts file

The address of rk3368 is 64-bits.
Change the order of "pclk_mipi_dsi" and "pclk_mipi_dsi_host"
in order compatible with earlier code.

Signed-off-by: chenyifu <chenyf@rock-chips.com>

rk3368 mipi: add mipi driver of rk3368

Signed-off-by: chenyifu <chenyf@rock-chips.com>

rk3368: dts: fix rk3368-p9_818 err

Drivers:
input: add gt9xx/ for goodix touchscreen.

rk3368:
    dts: add rk3368-p9_818.dts

rk fb: enable mmu when uboot-logo is 0

rk fb: fix fence time out for dual display mode

Signed-off-by: hjc <hjc@rock-chips.com>

rk: last_log: version 3.1, support arm64

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

arm64: rockchip: rockchip_defconfig enable TEST_POWER

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

rk: ion: fix compilation error without CONFIG_COMPAT

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

Merge branch develop-3.10 into develop-3.10-next

Conflicts:
drivers/clk/rockchip/clk-ops.h
drivers/video/rockchip/hdmi/chips/rk3288/rk3288_hdmi.c
drivers/video/rockchip/rk_fb.c

Merge tag 'lsk-v3.10-android-15.01'

LSK Android 15.01 v3.10

Conflicts:
arch/arm/Kconfig.debug
arch/arm64/mm/init.c
drivers/Makefile
drivers/cpufreq/cpufreq_interactive.c

dts: rk3126\rk3126b: modify VIO clocks to slove VIO idle fail problem

In rk3126, when aclk_vio0\aclk_vio1\hclk_vio were reparented from the
default parent gpll_div2 to gpll in clk_init, the temporary rates
are too high and may lead to failture in VIO idle_request later.
To slove this problem, VIO clocks are modified to auto select parent
and consider the order of reparent and set_div when set_rate.

Signed-off-by: dkl <dkl@rock-chips.com>

add usb charge config

rk3288 hdmi: If audio source if spdif, sclk/fs should be 128x.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

HDMI: fix filter feature SUPPORT_TMDS_600M error:
If soc is not support feature SUPPORT_TMDS_600M,
or current EDID information is not support the
feature, we should not show the corresponding
option, such as 3840x2160p-60.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

i2c: fix retry_count to return error when i2c bus checkidle was low

Signed-off-by: David Wu <wdc@rock-chips.com>

rk3368: rename pmu_grf or pmu to pmugrf

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

power: reset: rockchip-reboot: add rk3368 reboot driver

Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

rk3368: cpufreq: fix compile warning

Signed-off-by: Xiao Feng <xf@rock-chips.com>

rfkill-wlan.c: solve null point panic when wifi_chip_type is not define in dts

wifi->esp8089:
       ESP8089 driver update to V1.9.1(30/01/2015);
       Update the V2.4 esp_prealloc program.

hdmi:
1. fix 3288 hdmi audio source select error.
2. For mid, it need to call rk_fb_get_display_policy
   to reset overscan after swichting vop timing.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

rk3288: modify to ensure pairwise call of clk_enable\disable
        in rk3288_pll_early_suspend_notifier_call

Signed-off-by: dkl <dkl@rock-chips.com>

hdmi: depends on DRM_ROCKCHIP and fix document error.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

dts: fix compile err

Signed-off-by: lintao <lintao@rock-chips.com>

hdmi: update driver to v2.0:
1. Rename rk3036 hdmi to rockchip_hdmiv1, support hdmi v1.4;
2. Rename rk3288 hdmi to rockchip_hdmiv2, support hdmi v2.0;
3. Support transmmit 3D picture.
4. 3288 hdmi support HDCP, CEC and TMDSCLK 600M.
5. HDMI video source default is LCDC0, it can be modified in dts by
   follow:
    rockchip,hdmi_video_source = <DISPLAY_SOURCE_LCDC1>;
   HDCP and CEC function default is disabled , it can be enabled in
   dts file by follow:
    rockchip,hdcp_enable = <1>;
    rockchip,cec_enable = <1>;
   More information please see
Documentation/devicetree/bindings/video/rockchip_hdmi.txt

dts: rk312x: default enable emmc

Signed-off-by: lintao <lintao@rock-chips.com>

mmc: add more waiting for erase and status op

rk3288 hdmi: add cec clk and pinctrl.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

rk3288 hdmi:
To improve stability of reading EDID, we need to
disable HDMI ddc GPIO internal pull up.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

camera: oneframe v0.1.e

solve rfkill-wlan driver kernel panic when rfkill-bt driver probe fail

Wifi->rtl8812au: add chip name /sys/class/rkwifi/chip for RTL8812BU

Wifi->rtl8723au: update dirver to version 4.00(4.1.11_12622.20141215).

rk312x codec: fix rk312x codec switch state error

Signed-off-by: lxt <lxt@rock-chips.com>

modify display-sys.c and display-sys.h code style.

Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

rk3128: hdmi: add disable clock when system shutdown

disable clock will call disable power domain.
hdmi and lcdc share the power domain, so they must disable
the power domain when system shutdown.

Signed-off-by: zwl <zwl@rockchips.com>

rockchip: iommu: skip rk312x vop mmu stall operation,mask rk312x vop mmu interrupt

Video stress test failed, may have something relationship to vop mmu stall operation
skip it as a workaround

Reboot stress test failed, error showed a large number of vop/vop mmu interrupt,mask
vop mmu interrupt to avoid reboot stress test failed in rk312x

Signed-off-by: Simon <xxm@rock-chips.com>

camera: camsys_drv:v0.0x1b.0 oneframe:v0.1.0xd

rk312x: fix usb otg camera issues

mali_400_driver :
use mod_timer in mali_control_timer_callback_chain.
upgrade rk_ko_ver to 3.

rk312x, mali_400_driver : ammend rk_ko_ver.txt.

Support 1.5GB and 3GB with 2CS on the DDR1 channel

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-misc' into linux-linaro-lsk

Conflicts:
arch/arm64/include/asm/proc-fns.h
arch/arm64/kernel/debug-monitors.c
arch/arm64/kernel/psci.c

arm64: add atomic pool for non-coherent and CMA allocations

Neither CMA nor noncoherent allocations support atomic allocations.
Add a dedicated atomic pool to support this.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit d4932f9e81ae7a7bf3c3967e48373909b9c98ee5)
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge remote-tracking branch 'lsk/v3.10/topic/dma-mapping' into lsk-v3.10-arm64-misc

Revert "arm64: vdso: move to _install_special_mapping and remove arch_vma_name"

This reverts commit 95c91bdd8eafdc74337049c45d74c903b7dac49c.

Signed-off-by: Mark Brown <broonie@kernel.org>

Revert "arm64: vdso: move data page before code pages"

This reverts commit 82a95d0521cb6258559d18dca736da8272ba05a7.

Signed-off-by: Mark Brown <broonie@kernel.org>

Merge remote-tracking branch 'lsk/v3.10/topic/coresight' into linux-linaro-lsk

ARM: Revert "coresight: adding basic support for Vexpress TC2"

This reverts commit 63041eff2297676a345478c2b1cc6f76c63102db.  For some
reason this is causing failures before the serial console comes up on
TC2 when booted using UEFI, revert pending investigation.

Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

Merge remote-tracking branch 'lsk/linux-linaro-lsk' into linux-linaro-lsk

Merge branch 'linux-linaro-lsk' into linux-linaro-lsk-android

configs: add kernel internel boot testing configuration

The usage likes following:
$scripts/kconfig/merge_config.sh linaro/configs/linaro-base.conf
linaro/configs/booting-test.conf ...

It was tested on lsk-3.10 pandaboard ES.

Signed-off-by: Alex Shi <alex.shi@linaro.org>

usb: dwc_otg: handle data toggle error in right way

data toggle error without a ChannelHalt status is not a real data
toggle err, it is a transfer error state so just clear the
interrupt bit rather than resubmit this request

Signed-off-by: lyz <lyz@rock-chips.com>

usb: dwc_otg: fix issue with race condition of competition
between hcd_reinit() and cil_interrupt handler.

hcd_reinit() should get core_if->lock before modify this
lock, so that can prevent competition between cil_interrupt
handler and hcd_reinit(), hcd_reinit() be scheduled while
cil_interrupt handler holding core_if->lock, hcd_reinit() modify
the lock then previous core_if->lock will never be unlocked.

Signed-off-by: lyz <lyz@rock-chips.com>

usb: dwc_otg: double check disconnect state when otg state
changed

When otg stop host mode and before change to device mode hcd_stop
function should do something to double check all usb device is
disconnect because the disconnect interrupt might be lost.
1.kill all active urbs attached to this hcd
2.set hcd->flags to notify usb core to disconnect all usb devices

Signed-off-by: lyz <lyz@rock-chips.com>

Merge remote-tracking branch 'lsk/v3.10/topic/dma-mapping' into linux-linaro-lsk

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-perf' into linux-linaro-lsk

arm64: Add brackets around user_stack_pointer()

Commit 5f888a1d33 (ARM64: perf: support dwarf unwinding in compat mode)
changes user_stack_pointer() to return the compat SP for 32-bit tasks
but without brackets around the whole definition, with possible issues
on the call sites (noticed with a subsequent fix for KSTK_ESP).

Fixes: 5f888a1d33c4 (ARM64: perf: support dwarf unwinding in compat mode)
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
(cherry picked from commit 2520d039728b2a3c5ae7f79fe2a0e9d182855b12)
Signed-off-by: Mark Brown <broonie@kernel.org>

common: dma-mapping: introduce common remapping functions

For architectures without coherent DMA, memory for DMA may need to be
remapped with coherent attributes.  Factor out the the remapping code from
arm and put it in a common location to reduce code duplication.

As part of this, the arm APIs are now migrated away from
ioremap_page_range to the common APIs which use map_vm_area for remapping.
 This should be an equivalent change and using map_vm_area is more correct
as ioremap_page_range is intended to bring in io addresses into the cpu
space and not regular kernel managed memory.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 513510ddba9650fc7da456eefeb0ead7632324f6)
Signed-off-by: Mark Brown <broonie@kernel.org>

lib/genalloc.c: add genpool range check function

After allocating an address from a particular genpool, there is no good
way to verify if that address actually belongs to a genpool.  Introduce
addr_in_gen_pool which will return if an address plus size falls
completely within the genpool range.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 9efb3a421d55d30b65fb0dbee05108d15c6c55f7)
Signed-off-by: Mark Brown <broonie@kernel.org>

lib/genalloc.c: add power aligned algorithm

One of the more common algorithms used for allocation is to align the
start address of the allocation to the order of size requested.  Add this
as an algorithm option for genalloc.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 505e3be6c082489a32a88e042f930d047b6415bc)
Signed-off-by: Mark Brown <broonie@kernel.org>