firefly-linux-kernel-4.4.55.git
12 years agoMAINTAINERS: update EDAC information
Chris Metcalf [Sat, 31 Mar 2012 13:46:03 +0000 (09:46 -0400)]
MAINTAINERS: update EDAC information

The bluesmoke mailing list no longer works, so use
linux-edac@vger.kernel.org.  And, use a less restrictive pattern so all
drivers/edac changes go to linux-edac as well.

Borislav suggested I just push this through the tile tree since there
is currently no core edac maintainer (emails to Doug Thompson bounce).

Acked-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agotilepro ethernet driver: fix a few minor issues
Chris Metcalf [Fri, 30 Mar 2012 23:23:35 +0000 (19:23 -0400)]
tilepro ethernet driver: fix a few minor issues

This commit fixes a number of issues seen with the driver:

- Improve handling of return credits to the hardware shim
- Use skb_frag_size() appropriately
- Fix driver so it works properly with netpoll for console over UDP

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agotile-srom.c driver: minor code cleanup
Chris Metcalf [Fri, 30 Mar 2012 23:03:04 +0000 (19:03 -0400)]
tile-srom.c driver: minor code cleanup

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoedac: say "TILEGx" not "TILEPro" for the tilegx edac driver
Chris Metcalf [Fri, 30 Mar 2012 22:58:37 +0000 (18:58 -0400)]
edac: say "TILEGx" not "TILEPro" for the tilegx edac driver

This is just an aesthetic change but it was silly to say TILEPro
when booting up on the tilegx architecture.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
Chris Metcalf [Fri, 30 Mar 2012 20:29:06 +0000 (16:29 -0400)]
arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally

The return path as we reload registers and core state requires that r30
hold a boolean indicating whether we are returning from an NMI, but in a
couple of cases we weren't setting this properly, with the result that we
could accidentally unmask the NMI interrupt(s), which could cause confusion.
Now we set r30 in every place where we jump into the interrupt return path.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: remove bogus performance optimization
Chris Metcalf [Fri, 30 Mar 2012 20:27:20 +0000 (16:27 -0400)]
arch/tile: remove bogus performance optimization

We were re-homing the initial task's kernel stack on the boot cpu,
but in fact it's better to let it stay globally homed, since that
task isn't bound to the boot cpu anyway.  This is more of a general
cleanup than an actual performance optimization, but it removes
code, which is a good thing. :-)

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: return SIGBUS for addresses that are unaligned AND invalid
Chris Metcalf [Fri, 30 Mar 2012 20:24:41 +0000 (16:24 -0400)]
arch/tile: return SIGBUS for addresses that are unaligned AND invalid

Previously we were returning SIGSEGV in this case.  It seems cleaner
to return SIGBUS since the hardware figures out alignment traps
before TLB violations, so SIGBUS is the "more correct" signal.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix finv_buffer_remote() for tilegx
Chris Metcalf [Fri, 30 Mar 2012 19:47:38 +0000 (15:47 -0400)]
arch/tile: fix finv_buffer_remote() for tilegx

There were some correctness issues with this code that are now fixed
with this change.  The change is likely less performant than it could
be, but it should no longer be vulnerable to any races with memory
operations on the memory network while invalidating a range of memory.
This code is run infrequently so performance isn't critical, but
correctness definitely is.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: use atomic exchange in arch_write_unlock()
Chris Metcalf [Fri, 30 Mar 2012 19:46:29 +0000 (15:46 -0400)]
arch/tile: use atomic exchange in arch_write_unlock()

This idiom is used elsewhere when we do an unlock by writing a zero,
but I missed it here.  Using an atomic operation avoids waiting
on the write buffer for the unlocking write to be sent to the home cache.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: stop mentioning the "kvm" subdirectory
Chris Metcalf [Fri, 30 Mar 2012 19:29:40 +0000 (15:29 -0400)]
arch/tile: stop mentioning the "kvm" subdirectory

It causes "make clean" to fail, for example.  Once we have KVM support
complete, we'll reinstate the subdir reference.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: export the page_home() function.
Chris Metcalf [Thu, 29 Mar 2012 20:19:45 +0000 (16:19 -0400)]
arch/tile: export the page_home() function.

This avois a bug in modules trying to use the function.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix pointer cast in cacheflush.c
Chris Metcalf [Thu, 29 Mar 2012 20:14:40 +0000 (16:14 -0400)]
arch/tile: fix pointer cast in cacheflush.c

Pragmatically it couldn't be wrong to cast pointers to long to compare
them (since all kernel addresses are in the top half of VA space),
but it's more correct to cast to unsigned long.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix single-stepping over swint1 instructions on tilegx
Chris Metcalf [Thu, 29 Mar 2012 20:11:09 +0000 (16:11 -0400)]
arch/tile: fix single-stepping over swint1 instructions on tilegx

If we are single-stepping and make a syscall, we call ptrace_notify()
explicitly on the return path back to user space, since we are returning
to a pc value set artificially to the next instruction, and otherwise
we won't register that we stepped over the syscall instruction (swint1).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: implement panic_smp_self_stop()
Chris Metcalf [Thu, 29 Mar 2012 19:59:11 +0000 (15:59 -0400)]
arch/tile: implement panic_smp_self_stop()

This allows the later-panicking tiles to wait in a lower power state
until they get interrupted with an smp_send_stop().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: add "nop" after "nap" to help GX idle power draw
Chris Metcalf [Thu, 29 Mar 2012 19:57:18 +0000 (15:57 -0400)]
arch/tile: add "nop" after "nap" to help GX idle power draw

This avoids the hardware istream prefetcher doing unnecessary work.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: use proper memparse() for "maxmem" options
Chris Metcalf [Thu, 29 Mar 2012 19:56:18 +0000 (15:56 -0400)]
arch/tile: use proper memparse() for "maxmem" options

This is more standard and avoids having to remember what units
the options actually take.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix up locking in pgtable.c slightly
Chris Metcalf [Thu, 29 Mar 2012 19:50:08 +0000 (15:50 -0400)]
arch/tile: fix up locking in pgtable.c slightly

We should be holding the init_mm.page_table_lock in shatter_huge_page()
since we are modifying the kernel page tables.  Then, only if we are
walking the other root page tables to update them, do we want to take
the pgd_lock.

Add a comment about taking the pgd_lock that we always do it with
interrupts disabled and therefore are not at risk from the tlbflush
IPI deadlock as is seen on x86.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: don't leak kernel memory when we unload modules
Chris Metcalf [Thu, 29 Mar 2012 19:44:10 +0000 (15:44 -0400)]
arch/tile: don't leak kernel memory when we unload modules

We were failing to track the memory when we allocated it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix bug in delay_backoff()
Chris Metcalf [Thu, 29 Mar 2012 19:43:20 +0000 (15:43 -0400)]
arch/tile: fix bug in delay_backoff()

We were carefully computing a value to use for the number of loops
to spin for, and then ignoring it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix bug in loading kernels larger than 16 MB
Chris Metcalf [Thu, 29 Mar 2012 19:42:27 +0000 (15:42 -0400)]
arch/tile: fix bug in loading kernels larger than 16 MB

Previously we only handled kernels up to a single huge page in size.
Now we create additional PTEs appropriately.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: don't enable irqs unconditionally in page fault handler
Chris Metcalf [Thu, 29 Mar 2012 19:40:50 +0000 (15:40 -0400)]
arch/tile: don't enable irqs unconditionally in page fault handler

If we took a page fault while we had interrupts disabled, we
shouldn't enable them in the page fault handler.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: don't set the homecache of a PTE unless appropriate
Chris Metcalf [Thu, 29 Mar 2012 19:36:53 +0000 (15:36 -0400)]
arch/tile: don't set the homecache of a PTE unless appropriate

We make sure not to try to set the home for an MMIO PTE (on tilegx)
or a PTE that isn't referencing memory managed by Linux.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: don't wait for migrating PTEs in an NMI handler
Chris Metcalf [Thu, 29 Mar 2012 19:34:52 +0000 (15:34 -0400)]
arch/tile: don't wait for migrating PTEs in an NMI handler

Doing so raises the possibility of self-deadlock if we are waiting
for a backtrace for an oprofile or perf interrupt while we are
in the middle of migrating our own stack page.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile/Makefile: use KCFLAGS when figuring out the libgcc path.
Chris Metcalf [Thu, 29 Mar 2012 19:30:19 +0000 (15:30 -0400)]
arch/tile/Makefile: use KCFLAGS when figuring out the libgcc path.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix a couple of comments that needed updating
Chris Metcalf [Thu, 29 Mar 2012 19:29:28 +0000 (15:29 -0400)]
arch/tile: fix a couple of comments that needed updating

Not associated with any code changes, so I'm just lumping these
comment changes into a commit by themselves.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix up some minor trap handling issues
Chris Metcalf [Thu, 29 Mar 2012 19:23:54 +0000 (15:23 -0400)]
arch/tile: fix up some minor trap handling issues

We now respond to MEM_ERROR traps (e.g. an atomic instruction to
non-cacheable memory) with a SIGBUS.

We also no longer generate a console crash message if a user
process die due to a SIGTRAP.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: work around a hardware issue with the return-address stack
Chris Metcalf [Thu, 29 Mar 2012 18:52:00 +0000 (14:52 -0400)]
arch/tile: work around a hardware issue with the return-address stack

In certain circumstances we need to do a bunch of jump-and-link
instructions to fill the hardware return-address stack with nonzero values.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: various bugs in stack backtracer
Chris Metcalf [Thu, 29 Mar 2012 18:06:14 +0000 (14:06 -0400)]
arch/tile: various bugs in stack backtracer

Fix a long-standing bug in the stack backtracer where we would print
garbage to the console instead of kernel function names, if the kernel
wasn't built with symbol support (e.g. mboot).

Make sure to tag every line of userspace backtrace output if we actually
have the mmap_sem, since that way if there's no tag, we know that it's
because we couldn't trylock the semaphore.

Stop doing a TLB flush and examining page tables during backtrace.
Instead, just trust that __copy_from_user_inatomic() will properly fault
and return a failure, which it should do in all cases.

Fix a latent bug where the backtracer would directly examine a signal
context in user space, rather than copying it safely to kernel memory
first.  This meant that a race with another thread could potentially
have caused a kernel panic.

Guard against unaligned sp when trying to restart backtrace at an
interrupt or signal handler point in the kernel backtracer.

Report kernel symbolic information for the call instruction rather
than for the following instruction.  We still report the actual numeric
address corresponding to the instruction after the call, for the sake
of consistency with the normal expectations for stack backtracers.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: make sure to build memcpy_user_64 without frame pointer
Chris Metcalf [Thu, 29 Mar 2012 18:05:04 +0000 (14:05 -0400)]
arch/tile: make sure to build memcpy_user_64 without frame pointer

Add a comment explaining why this is important, and add a CFLAGS_REMOVE
clause to the Makefile to make sure it happens.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: avoid false corrupt frame warning in early boot
Chris Metcalf [Thu, 29 Mar 2012 18:02:52 +0000 (14:02 -0400)]
arch/tile: avoid false corrupt frame warning in early boot

With lockstat we can end up trying to get a backtrace before
"high_memory" is initialized, so don't worry about range testing
if it is zero.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: use 0 for IRQ_RESCHEDULE instead of 1
Chris Metcalf [Tue, 27 Mar 2012 19:21:00 +0000 (15:21 -0400)]
arch/tile: use 0 for IRQ_RESCHEDULE instead of 1

This avoids assigning IRQ 0 to PCI devices, because we've seen that
doesn't always work well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix gcc 4.6 warnings in <asm/bitops_64.h>
Chris Metcalf [Tue, 27 Mar 2012 18:17:05 +0000 (14:17 -0400)]
arch/tile: fix gcc 4.6 warnings in <asm/bitops_64.h>

Fix some signedness and variable usage warnings in change_bit()
and test_and_change_bit().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: revert comment for atomic64_add_unless().
Chris Metcalf [Tue, 27 Mar 2012 18:10:03 +0000 (14:10 -0400)]
arch/tile: revert comment for atomic64_add_unless().

It still returns whether @v was not @u, not the old value,
unlike __atomic_add_unless().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arun Sharma <asharma@fb.com>
12 years agoarch/tile: fix typo in <arch/spr_def.h>
Chris Metcalf [Tue, 27 Mar 2012 18:04:57 +0000 (14:04 -0400)]
arch/tile: fix typo in <arch/spr_def.h>

We aren't yet using this definition in the kernel, but fix it up
before someone goes looking for it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile/Kconfig: don't specify CONFIG_PAGE_OFFSET for 64-bit builds
Chris Metcalf [Tue, 27 Mar 2012 17:56:04 +0000 (13:56 -0400)]
arch/tile/Kconfig: don't specify CONFIG_PAGE_OFFSET for 64-bit builds

It's fixed at half the VA space and there's no point in configuring it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile/Kconfig: rename tile_defconfig to tilepro_defconfig
Chris Metcalf [Tue, 27 Mar 2012 17:53:30 +0000 (13:53 -0400)]
arch/tile/Kconfig: rename tile_defconfig to tilepro_defconfig

We switched to using "tilepro" for the 32-bit stuff a while ago,
but missed this one usage.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile/Kconfig: remove pointless "!M386" test.
Chris Metcalf [Tue, 27 Mar 2012 17:47:57 +0000 (13:47 -0400)]
arch/tile/Kconfig: remove pointless "!M386" test.

Looks like a cut and paste bug from the x86 version.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agotile: fix multiple build failures from system.h dismantle
Paul Gortmaker [Sun, 1 Apr 2012 20:38:46 +0000 (16:38 -0400)]
tile: fix multiple build failures from system.h dismantle

Commit bd119c69239322caafdb64517a806037d0d0c70a

    "Disintegrate asm/system.h for Tile"

created the asm/switch_to.h file, but did not add an include
of it to all its users.

Also, commit b4816afa3986704d1404fc48e931da5135820472

        "Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h"

introduced the concept of asm/cmpxchg.h but the tile arch
never got one.  Fork the cmpxchg content out of the asm/atomic.h
file to create one.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoLinux 3.4-rc1
Linus Torvalds [Sat, 31 Mar 2012 23:24:09 +0000 (16:24 -0700)]
Linux 3.4-rc1

12 years agoMerge branch 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virti...
Linus Torvalds [Sat, 31 Mar 2012 22:11:39 +0000 (15:11 -0700)]
Merge branch 's3-for-3.4' of git://git./linux/kernel/git/amit/virtio-console

Pull virtio S3 support patches from Amit Shah:
 "Turns out S3 is not different from S4 for virtio devices: the device
  is assumed to be reset, so the host and guest state are to be assumed
  to be out of sync upon resume.  We handle the S4 case with exactly the
  same scenario, so just point the suspend/resume routines to the
  freeze/restore ones.

  Once that is done, we also use the PM API's macro to initialise the
  sleep functions.

  A couple of cleanups are included: there's no need for special thaw
  processing in the balloon driver, so that's addressed in patches 1 and
  2.

  Testing: both S3 and S4 support have been tested using these patches
  using a similar method used earlier during S4 patch development: a
  guest is started with virtio-blk as the only disk, a virtio network
  card, a virtio-serial port and a virtio balloon device.  Ping from
  guest to host, dd /dev/zero to a file on the disk, and IO from the
  host on the virtio-serial port, all at once, while exercising S4 and
  S3 (separately) were tested.  They all continue to work fine after
  resume.  virtio balloon values too were tested by inflating and
  deflating the balloon."

Pulling from Amit, since Rusty is off getting married (and presumably
shaving people).

* 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console:
  virtio-pci: switch to PM ops macro to initialise PM functions
  virtio-pci: S3 support
  virtio-pci: drop restore_common()
  virtio: drop thaw PM operation
  virtio: balloon: Allow stats update after restore from S4

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sat, 31 Mar 2012 20:42:57 +0000 (13:42 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull second try at vfs part d#2 from Al Viro:
 "Miklos' first series (with do_lookup() rewrite split into edible
  chunks) + assorted bits and pieces.

  The 'untangling of do_lookup()' series is is a splitup of what used to
  be a monolithic patch from Miklos, so this series is basically "how do
  I convince myself that his patch is correct (or find a hole in it)".
  No holes found and I like the resulting cleanup, so in it went..."

Changes from try 1: Fix a boot problem with selinux, and commit messages
prettied up a bit.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
  vfs: fix out-of-date dentry_unhash() comment
  vfs: split __lookup_hash
  untangling do_lookup() - take __lookup_hash()-calling case out of line.
  untangling do_lookup() - switch to calling __lookup_hash()
  untangling do_lookup() - merge d_alloc_and_lookup() callers
  untangling do_lookup() - merge failure exits in !dentry case
  untangling do_lookup() - massage !dentry case towards __lookup_hash()
  untangling do_lookup() - get rid of need_reval in !dentry case
  untangling do_lookup() - eliminate a loop.
  untangling do_lookup() - expand the area under ->i_mutex
  untangling do_lookup() - isolate !dentry stuff from the rest of it.
  vfs: move MAY_EXEC check from __lookup_hash()
  vfs: don't revalidate just looked up dentry
  vfs: fix d_need_lookup/d_revalidate order in do_lookup
  ext3: move headers to fs/ext3/
  migrate ext2_fs.h guts to fs/ext2/ext2.h
  new helper: ext2_image_size()
  get rid of pointless includes of ext2_fs.h
  ext2: No longer export ext2_fs.h to user space
  mtdchar: kill persistently held vfsmount
  ...

12 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 31 Mar 2012 20:35:31 +0000 (13:35 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()
  sched: Fix __schedule_bug() output when called from an interrupt
  sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback

12 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 31 Mar 2012 20:34:04 +0000 (13:34 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates and fixes from Ingo Molnar:
 "It's mostly fixes, but there's also two late items:

   - preliminary GTK GUI support for perf report
   - PMU raw event format descriptors in sysfs, to be parsed by tooling

  The raw event format in sysfs is a new ABI.  For example for the 'CPU'
  PMU we have:

    aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/*
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc
    -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask

  those lists of fields contain a specific format:

    aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp
    config1:0-63

  So, those who wish to specify raw events can now use the following
  event format:

    -e cpu/cmask=1,event=2,umask=3

  Most people will not want to specify any events (let alone raw
  events), they'll just use whatever default event the tools use.

  But for more obscure PMU events that have no cross-architecture
  generic events the above syntax is more usable and a bit more
  structured than specifying hex numbers."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  perf tools: Remove auto-generated bison/flex files
  perf annotate: Fix off by one symbol hist size allocation and hit accounting
  perf tools: Add missing ref-cycles event back to event parser
  perf annotate: addr2line wants addresses in same format as objdump
  perf probe: Finder fails to resolve function name to address
  tracing: Fix ent_size in trace output
  perf symbols: Handle NULL dso in dso__name_len
  perf symbols: Do not include libgen.h
  perf tools: Fix bug in raw sample parsing
  perf tools: Fix display of first level of callchains
  perf tools: Switch module.h into export.h
  perf: Move mmap page data_head offset assertion out of header
  perf: Fix mmap_page capabilities and docs
  perf diff: Fix to work with new hists design
  perf tools: Fix modifier to be applied on correct events
  perf tools: Fix various casting issues for 32 bits
  perf tools: Simplify event_read_id exit path
  tracing: Fix ftrace stack trace entries
  tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
  perf report: Add a simple GTK2-based 'perf report' browser
  ...

12 years agoMerge tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Sat, 31 Mar 2012 20:32:30 +0000 (13:32 -0700)]
Merge tag 'parisc-misc' of git://git./linux/kernel/git/jejb/parisc-2.6

Pull PARISC misc updates from James Bottomley:
 "This is a couple of minor updates (fixing lws futex locking and
  removing some obsolete cpu_*_map calls)."

* tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] remove references to cpu_*_map.
  [PARISC] futex: Use same lock set as lws calls

12 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi...
Linus Torvalds [Sat, 31 Mar 2012 20:31:23 +0000 (13:31 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi-misc-2.6

Pull SCSI updates from James Bottomley:
 "This is primarily another round of driver updates (lpfc, bfa, fcoe,
  ipr) plus a new ufshcd driver.  There shouldn't be anything
  controversial in here (The final deletion of scsi proc_ops which
  caused some build breakage has been held over until the next merge
  window to give us more time to stabilise it).

  I'm afraid, with me moving continents at exactly the wrong time,
  anything submitted after the merge window opened has been held over to
  the next merge window."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
  [SCSI] ipr: Driver version 2.5.3
  [SCSI] ipr: Increase alignment boundary of command blocks
  [SCSI] ipr: Increase max concurrent oustanding commands
  [SCSI] ipr: Remove unnecessary memory barriers
  [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
  [SCSI] ipr: Fix target id allocation re-use problem
  [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
  [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
  [SCSI] bfa: Update the driver version to 3.0.23.0
  [SCSI] bfa: BSG and User interface fixes.
  [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
  [SCSI] bfa: Move service parameter programming logic into firmware.
  [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
  [SCSI] bfa: Flash controller IOC pll init fixes.
  [SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
  [SCSI] bfa: Modify ISR to process pending completions
  [SCSI] bfa: Add fc host issue lip support
  [SCSI] mpt2sas: remove extraneous sas_log_info messages
  [SCSI] libfc: fcoe_transport_create fails in single-CPU environment
  [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
  ...

12 years agovfs: fix out-of-date dentry_unhash() comment
J. Bruce Fields [Wed, 15 Feb 2012 16:48:40 +0000 (11:48 -0500)]
vfs: fix out-of-date dentry_unhash() comment

64252c75a2196a0cf1e0d3777143ecfe0e3ae650 "vfs: remove dget() from
dentry_unhash()" changed the implementation but not the comment.

Cc: Sage Weil <sage@newdream.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agovfs: split __lookup_hash
Miklos Szeredi [Mon, 26 Mar 2012 10:54:24 +0000 (12:54 +0200)]
vfs: split __lookup_hash

Split __lookup_hash into two component functions:

 lookup_dcache - tries cached lookup, returns whether real lookup is needed
 lookup_real - calls i_op->lookup

This eliminates code duplication between d_alloc_and_lookup() and
d_inode_lookup().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - take __lookup_hash()-calling case out of line.
Al Viro [Fri, 30 Mar 2012 18:48:04 +0000 (14:48 -0400)]
untangling do_lookup() - take __lookup_hash()-calling case out of line.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - switch to calling __lookup_hash()
Al Viro [Fri, 30 Mar 2012 18:41:51 +0000 (14:41 -0400)]
untangling do_lookup() - switch to calling __lookup_hash()

now we have __lookup_hash() open-coded if !dentry case;
just call the damn thing instead...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - merge d_alloc_and_lookup() callers
Al Viro [Fri, 30 Mar 2012 18:39:15 +0000 (14:39 -0400)]
untangling do_lookup() - merge d_alloc_and_lookup() callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - merge failure exits in !dentry case
Al Viro [Fri, 30 Mar 2012 18:37:42 +0000 (14:37 -0400)]
untangling do_lookup() - merge failure exits in !dentry case

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - massage !dentry case towards __lookup_hash()
Al Viro [Fri, 30 Mar 2012 18:34:00 +0000 (14:34 -0400)]
untangling do_lookup() - massage !dentry case towards __lookup_hash()

Reorder if-else cases for starters...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - get rid of need_reval in !dentry case
Al Viro [Fri, 30 Mar 2012 18:18:50 +0000 (14:18 -0400)]
untangling do_lookup() - get rid of need_reval in !dentry case

Everything arriving into if (!dentry) will have need_reval = 1.
Indeed, the only way to get there with need_reval reset to 0 would
be via
if (unlikely(d_need_lookup(dentry)))
goto unlazy;
if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) {
status = d_revalidate(dentry, nd);
if (unlikely(status <= 0)) {
if (status != -ECHILD)
need_reval = 0;
goto unlazy;
...
unlazy:
/* no assignments to dentry */
if (dentry && unlikely(d_need_lookup(dentry))) {
dput(dentry);
dentry = NULL;
}
and if d_need_lookup() had already been false the first time around, it
will remain false on the second call as well.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - eliminate a loop.
Al Viro [Fri, 30 Mar 2012 18:13:15 +0000 (14:13 -0400)]
untangling do_lookup() - eliminate a loop.

d_lookup() *will* fail after successful d_invalidate(), if we are
holding i_mutex all along.  IOW, we don't need to jump back to
l: - we know what path will be taken there and can do that (i.e.
d_alloc_and_lookup()) directly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - expand the area under ->i_mutex
Al Viro [Fri, 30 Mar 2012 18:08:28 +0000 (14:08 -0400)]
untangling do_lookup() - expand the area under ->i_mutex

keep holding ->i_mutex over revalidation parts

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agountangling do_lookup() - isolate !dentry stuff from the rest of it.
Al Viro [Fri, 30 Mar 2012 18:04:16 +0000 (14:04 -0400)]
untangling do_lookup() - isolate !dentry stuff from the rest of it.

Duplicate the revalidation-related parts into if (!dentry) branch.
Next step will be to pull them under i_mutex.

This and the next 8 commits are more or less a splitup of patch
by Miklos; folks, when you are working with something that convoluted,
carve your patches up into easily reviewed steps, especially when
a lot of codepaths involved are rarely hit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agovfs: move MAY_EXEC check from __lookup_hash()
Miklos Szeredi [Mon, 26 Mar 2012 10:54:21 +0000 (12:54 +0200)]
vfs: move MAY_EXEC check from __lookup_hash()

The only caller of __lookup_hash() that needs the exec permission check on
parent is lookup_one_len().

All lookup_hash() callers already checked permission in LOOKUP_PARENT walk.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agovfs: don't revalidate just looked up dentry
Miklos Szeredi [Mon, 26 Mar 2012 10:54:20 +0000 (12:54 +0200)]
vfs: don't revalidate just looked up dentry

__lookup_hash() calls ->lookup() if the dentry needs lookup and on success
revalidates the dentry (all under dir->i_mutex).

While this is harmless it doesn't make a lot of sense.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agovfs: fix d_need_lookup/d_revalidate order in do_lookup
Miklos Szeredi [Mon, 26 Mar 2012 10:54:19 +0000 (12:54 +0200)]
vfs: fix d_need_lookup/d_revalidate order in do_lookup

Doing revalidate on a dentry which has not yet been looked up makes no sense.

Move the d_need_lookup() check before d_revalidate().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoext3: move headers to fs/ext3/
Al Viro [Fri, 30 Mar 2012 02:30:07 +0000 (22:30 -0400)]
ext3: move headers to fs/ext3/

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agomigrate ext2_fs.h guts to fs/ext2/ext2.h
Al Viro [Fri, 23 Mar 2012 20:45:51 +0000 (16:45 -0400)]
migrate ext2_fs.h guts to fs/ext2/ext2.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agonew helper: ext2_image_size()
Al Viro [Fri, 23 Mar 2012 20:36:45 +0000 (16:36 -0400)]
new helper: ext2_image_size()

... implemented that way since the next commit will leave it
almost alone in ext2_fs.h - most of the file (including
struct ext2_super_block) is going to move to fs/ext2/ext2.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoget rid of pointless includes of ext2_fs.h
Al Viro [Fri, 23 Mar 2012 20:04:05 +0000 (16:04 -0400)]
get rid of pointless includes of ext2_fs.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoext2: No longer export ext2_fs.h to user space
Thierry Reding [Fri, 23 Mar 2012 09:27:36 +0000 (10:27 +0100)]
ext2: No longer export ext2_fs.h to user space

Since the on-disk format has been stable for quite some time, users
should either use the headers provided by libext2fs or keep a private
copy of this header. For the full discussion, see this thread:

https://lkml.org/lkml/2012/3/21/516

While at it, this commit removes all __KERNEL__ guards, which are now
unnecessary.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Andreas Dilger <aedilger@gmail.com>
Cc: linux-ext4@vger.kernel.org
12 years agomtdchar: kill persistently held vfsmount
Al Viro [Fri, 23 Mar 2012 17:47:52 +0000 (13:47 -0400)]
mtdchar: kill persistently held vfsmount

... and mtdchar_notifier along with it; just have ->drop_inode() that
will unconditionally get evict them instead of dances on mtd device
removal and use simple_pin_fs() instead of kern_mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agopstore: trim pstore_get_inode()
Al Viro [Thu, 22 Mar 2012 16:26:35 +0000 (12:26 -0400)]
pstore: trim pstore_get_inode()

move mode-dependent parts to callers, kill unused arguments

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoaio: take final put_ioctx() into callers of io_destroy()
Al Viro [Tue, 20 Mar 2012 20:27:57 +0000 (16:27 -0400)]
aio: take final put_ioctx() into callers of io_destroy()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoaio: merge aio_cancel_all() with wait_for_all_aios()
Al Viro [Tue, 20 Mar 2012 20:26:24 +0000 (16:26 -0400)]
aio: merge aio_cancel_all() with wait_for_all_aios()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoselinuxfs: merge dentry allocation into sel_make_dir()
Al Viro [Mon, 19 Mar 2012 00:36:59 +0000 (20:36 -0400)]
selinuxfs: merge dentry allocation into sel_make_dir()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoASPM: Fix pcie devices with non-pcie children
Matthew Garrett [Tue, 27 Mar 2012 14:17:41 +0000 (10:17 -0400)]
ASPM: Fix pcie devices with non-pcie children

Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON.
Some other systems using the pata_jmicron driver fail to boot because no
disks are detected.  Passing pcie_aspm=force on the kernel command line
works around it.

The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when
ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to
always return 0 if aspm is disabled, in order to avoid cases where we
changed ASPM state on pre-PCIe 1.1 devices.

This skipped the secondary function of pcie_aspm_sanity_check which was
to avoid us enabling ASPM on devices that had non-PCIe children, causing
trouble later on.  Move the aspm_disabled check so we continue to honour
that scenario.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and
          http://bugs.debian.org/665420

Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic
Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520
Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363
[jn: with more symptoms in log message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoselinux: inline avc_audit() and avc_has_perm_noaudit() into caller
Linus Torvalds [Sat, 31 Mar 2012 18:12:57 +0000 (11:12 -0700)]
selinux: inline avc_audit() and avc_has_perm_noaudit() into caller

Now that all the slow-path code is gone from these functions, we can
inline them into the main caller - avc_has_perm_flags().

Now the compiler can see that 'avc' is allocated on the stack for this
case, which helps register pressure a bit.  It also actually shrinks the
total stack frame, because the stack frame that avc_has_perm_flags()
always needed (for that 'avc' allocation) is now sufficient for the
inlined functions too.

Inlining isn't bad - but mindless inlining of cold code (see the
previous commit) is.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoselinux: don't inline slow-path code into avc_has_perm_noaudit()
Linus Torvalds [Sat, 31 Mar 2012 17:58:08 +0000 (10:58 -0700)]
selinux: don't inline slow-path code into avc_has_perm_noaudit()

The selinux AVC paths remain some of the hottest (and deepest) codepaths
at filename lookup time, and we make it worse by having the slow path
cases take up I$ and stack space even when they don't trigger.  Gcc
tends to always want to inline functions that are just called once -
never mind that this might make for slower and worse code in the caller.

So this tries to improve on it a bit by making the slow-path cases
explicitly separate functions that are marked noinline, causing gcc to
at least no longer allocate stack space for them unless they are
actually called.  It also seems to help register allocation a tiny bit,
since gcc now doesn't take the slow case code into account.

Uninlining the slow path may also allow us to inline the remaining hot
path into the one caller that actually matters: avc_has_perm_flags().
I'll have to look at that separately, but both avc_audit() and
avc_has_perm_noaudit() are now small and lean enough that inlining them
may make sense.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agosched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()
Srivatsa S. Bhat [Fri, 30 Mar 2012 14:10:28 +0000 (19:40 +0530)]
sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()

The function for_each_cpu_mask() expects a *pointer* to struct
cpumask as its second argument, whereas select_fallback_rq()
passes the value itself.

And moreover, for_each_cpu_mask() has been marked as obselete
in include/linux/cpumask.h. So move to the more appropriate
for_each_cpu() variant.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Dave Jones <davej@redhat.com>
Cc: Liu Chuansheng <chuansheng.liu@intel.com>
Cc: vapier@gentoo.org
Cc: rusty@rustcorp.com.au
Link: http://lkml.kernel.org/r/4F75BED4.9050005@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
12 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme...
Ingo Molnar [Sat, 31 Mar 2012 07:27:41 +0000 (09:27 +0200)]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/acme/linux into perf/urgent

12 years agovirtio-pci: switch to PM ops macro to initialise PM functions
Amit Shah [Thu, 29 Mar 2012 07:28:05 +0000 (12:58 +0530)]
virtio-pci: switch to PM ops macro to initialise PM functions

Use the SET_SYSTEM_SLEEP_PM_OPS macro to initialise the suspend/resume
functions in the new PM API.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
12 years agovirtio-pci: S3 support
Amit Shah [Thu, 29 Mar 2012 07:21:41 +0000 (12:51 +0530)]
virtio-pci: S3 support

There's no difference in supporting S3 and S4 for virtio devices: the
vqs have to be re-created as the device has to be assumed to be reset at
restore-time.  Since S4 already handles this situation, we can directly
use the same code and callbacks for S3 support.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
12 years agovirtio-pci: drop restore_common()
Amit Shah [Thu, 29 Mar 2012 07:24:43 +0000 (12:54 +0530)]
virtio-pci: drop restore_common()

restore_common() was shared between restore and thaw callbacks.  With
thaw gone, we don't need restore_common() anymore.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
12 years agovirtio: drop thaw PM operation
Amit Shah [Thu, 29 Mar 2012 07:20:20 +0000 (12:50 +0530)]
virtio: drop thaw PM operation

The thaw operation was used by the balloon driver, but after the last
commit there's no reason to have separate thaw and restore callbacks.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
12 years agovirtio: balloon: Allow stats update after restore from S4
Amit Shah [Thu, 29 Mar 2012 07:18:19 +0000 (12:48 +0530)]
virtio: balloon: Allow stats update after restore from S4

There's no reason stats update after restore can't work.  If a host
requested for stats, and before servicing the request, the guest entered
S4, upon restore, the stats request can still be processed and sent off
to the host.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Sat, 31 Mar 2012 01:40:33 +0000 (18:40 -0700)]
Merge git://git./linux/kernel/git/davem/sparc

Pull Sam Ravnborg's sparc32 build fixes from David Miller.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: fix fallout from system.h removal

12 years agosparc32: fix fallout from system.h removal
Sam Ravnborg [Fri, 30 Mar 2012 13:53:50 +0000 (15:53 +0200)]
sparc32: fix fallout from system.h removal

Build failures for the typical configs I use

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 31 Mar 2012 01:15:43 +0000 (18:15 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild changes from Michal Marek:
 - Unification of cmd_uimage among archs that use it
 - make headers_check tries harder before reporting a missing
   <linux/types.h> include
 - kbuild portability fix for shells that do not support echo -e
 - make clean descends into samples/
 - setlocalversion grep fix
 - modpost typo fix
 - dtc warnings fix

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  setlocalversion: Use "grep -q" instead of piping output to "read dummy"
  modpost: fix ALL_INIT_DATA_SECTIONS
  Kbuild: centralize MKIMAGE and cmd_uimage definitions
  headers_check: recursively search for linux/types.h inclusion
  scripts/Kbuild.include: Fix portability problem of "echo -e"
  scripts: dtc: fix compile warnings
  kbuild: clean up samples directory
  kbuild: disable -Wmissing-field-initializers for W=1

12 years agoMerge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 31 Mar 2012 01:14:05 +0000 (18:14 -0700)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild

Pull non-critical part of kbuild from Michal Marek:
 - New semantic patches, make coccicheck M= fix
 - make gtags speedup
 - make tags/TAGS always removes struct forward declarations
 - make deb-pkg fixes (some patches are still pending, I know)
 - scripts/patch-kernel fix from the last user of this script ;)

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/patch-kernel: digest kernel.org hosted .xz patches
  scripts/coccinelle/api/ptr_ret.cocci: semantic patch for ptr_err
  scripts: refactor remove structure forward declarations
  kbuild: incremental tags update for GNU Global
  coccinelle: semantic patch for bool issues
  coccinelle: semantic patch to check for PTR_ERR after reassignment
  coccinelle: semantic patch converting 0 test to null test
  coccinelle: semantic patch for missing iounmap
  coccinelle: semantic patch for missing clk_put
  kbuild: Fix out-of-tree build for 'make deb-pkg'
  kbuild: Only build linux-image package for UML
  kbuild: Fix link to headers in 'make deb-pkg'
  coccicheck: change handling of C={1,2} when M= is set

12 years agoMerge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sat, 31 Mar 2012 01:13:17 +0000 (18:13 -0700)]
Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild

Pull kconfig bits from Michal Marek:
 "There is one fix for make oldconfig by Arnaud and updates to the
  merge_config.sh tool."

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  merge_config.sh: Add option to display redundant configs
  merge_config.sh: Set execute bit
  merge_config.sh: Use the first file as the initial config
  kconfig: fix new choices being skipped upon config update

12 years agoMerge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 31 Mar 2012 01:08:05 +0000 (18:08 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull genirq updates from Thomas Gleixner.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Adjust irq thread affinity on IRQ_SET_MASK_OK_NOCOPY return value
  genirq: Respect NUMA node affinity in setup_irq_irq affinity()
  genirq: Get rid of unneeded force parameter in irq_finalize_oneshot()
  genirq: Minor readablity improvement in irq_wake_thread()

12 years agoMerge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 31 Mar 2012 01:07:13 +0000 (18:07 -0700)]
Merge branch 'core-locking-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core locking updates from Thomas Gleixner.

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Mark get_robust_list as deprecated
  futex: Do not leak robust list to unprivileged process

12 years agoMerge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6
Linus Torvalds [Sat, 31 Mar 2012 00:31:56 +0000 (17:31 -0700)]
Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_<level>.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...

12 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sat, 31 Mar 2012 00:00:34 +0000 (17:00 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull a few more ARM platform fixes from Olof Johansson:
 "Apologies for back-to-back fixes pull requests, but one of the patches
  below are the kind we'll see posted over and over if we don't send it
  in.  I hadn't done the full sanity-check of defconfig builds by the
  time I sent up the other fixes yesterday or I would have included it
  then.

  Two patches, one dealing with the system.h fallout, the other is a
  missing linux/bug.h in a place where ARRAY_SIZE() is used."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: clps711x: fix missing include file
  ARM: fix builds due to missing <asm/system_misc.h> includes

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Fri, 30 Mar 2012 23:45:38 +0000 (16:45 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull ACPI & Power Management changes from Len Brown:
 - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
 - cpuidle evolving, more ARM use
 - thermal sub-system evolving, ditto
 - assorted other PM bits

Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
  ACPI throttling: fix endian bug in acpi_read_throttling_status()
  Disable MCP limit exceeded messages from Intel IPS driver
  ACPI video: Don't start video device until its associated input device has been allocated
  ACPI video: Harden video bus adding.
  ACPI: Add support for exposing BGRT data
  ACPI: export acpi_kobj
  ACPI: Fix logic for removing mappings in 'acpi_unmap'
  CPER failed to handle generic error records with multiple sections
  ACPI: Clean redundant codes in scan.c
  ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
  ACPI: consistently use should_use_kmap()
  PNPACPI: Fix device ref leaking in acpi_pnp_match
  ACPI: Fix use-after-free in acpi_map_lsapic
  ACPI: processor_driver: add missing kfree
  ACPI, APEI: Fix incorrect APEI register bit width check and usage
  Update documentation for parameter *notrigger* in einj.txt
  ACPI, APEI, EINJ, new parameter to control trigger action
  ACPI, APEI, EINJ, limit the range of einj_param
  ACPI, APEI, Fix ERST header length check
  cpuidle: power_usage should be declared signed integer
  ...

12 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 30 Mar 2012 23:24:38 +0000 (16:24 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] Update CIFS version number to 1.77
  CIFS: Add missed forcemand mount option
  [CIFS] Fix trivial sparse warning with asyn i/o patch
  cifs: handle "sloppy" option appropriately
  cifs: use standard token parser for mount options
  cifs: remove /proc/fs/cifs/OplockEnabled
  cifs: convert cifs_iovec_write to use async writes
  cifs: call cifs_update_eof with i_lock held
  cifs: abstract out function to marshal up the iovec array for async writes
  cifs: fix up get_numpages
  cifs: make cifsFileInfo_get return the cifsFileInfo pointer
  cifs: fix allocation in cifs_write_allocate_pages
  cifs: allow caller to specify completion op when allocating writedata
  cifs: add pid field to cifs_writedata
  cifs: add new cifsiod_wq workqueue
  CIFS: Change mid_q_entry structure fields
  CIFS: Expand CurrentMid field
  CIFS: Separate protocol-specific code from cifs_readv_receive code
  CIFS: Separate protocol-specific code from demultiplex code
  CIFS: Separate protocol-specific code from transport routines

12 years agoMerge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6
Linus Torvalds [Fri, 30 Mar 2012 23:09:02 +0000 (16:09 -0700)]
Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Various small bugfixes and enhancements, plus two new drivers:
   - A quite complex ab8500 charger driver, submitted by Arun Murthy @
     ST-Ericsson;
   - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce
     E Robertson and Alan Cox @ Intel.

  And that's all."

* tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits)
  max17042_battery: Clean up interrupt handling
  Revert "max8998_charger: Include linux/module.h just once"
  ab8500_fg: Fix some build warnings on x86_64
  max17042_battery: Fix CHARGE_FULL representation.
  max8998_charger: Include linux/module.h just once
  power_supply: Convert i2c drivers to module_i2c_driver
  lp8727_charger: Add MODULE_DEVICE_TABLE
  charger-manager: Simplify charger_get_property(), get rid of a warning
  charger-manager: Clean up for better readability
  da9052-battery: Convert to use module_platform_driver
  da9052-battery: Fix a memory leak when unload the module
  da9052-battery: Add missing platform_set_drvdata
  ab8500: Turn unneeded global symbols into local ones
  ab8500_fg: Fix copy-paste error
  ab8500_fg: Get rid of 'struct battery_type'
  ab8500_fg: Get rid of 'struct v_to_cap'
  ab8500_btemp: Get rid of 'enum adc_therm'
  ab8500_charger: Convert to the new USB OTG calls
  ab8500-btemp: AB8500 battery temperature driver
  ab8500-fg: A8500 fuel gauge driver
  ...

12 years agoMerge branch 'dunlap' (Randy's Documentation patches)
Linus Torvalds [Fri, 30 Mar 2012 23:03:55 +0000 (16:03 -0700)]
Merge branch 'dunlap' (Randy's Documentation patches)

Merge Documentation fixes from Randy Dunlap.

Fixed up several small annoyances (bad changelogs and corrupted utf8
names), I need to try to convince people to do things right.

* emailed from Randy Dunlap <rdunlap@xenotime.net>:
  Documentation: fix typo in ABI/stable/sysfs-driver-usb-usbtmc
  Documentation: replace install commands with softdeps
  Documentation: remove references to /etc/modprobe.conf
  Documentation: input.txt: clarify mousedev 'cat' command syntax
  Documentation: CodingStyle: add inline assembly guidelines
  Documentation: sysrq: Crutcher Dunnavant is unavailable
  Documentation: mention scripts/diffconfig tool
  Documentation: remove 'mach' from dontdiff file

12 years agoDocumentation: fix typo in ABI/stable/sysfs-driver-usb-usbtmc
Rafal Kapela [Fri, 30 Mar 2012 20:37:26 +0000 (13:37 -0700)]
Documentation: fix typo in ABI/stable/sysfs-driver-usb-usbtmc

Fix "the the" in ABI/stable/sysfs-driver-usb-usbtmc

Signed-off-by: Rafal Kapela <raf.kapela@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: replace install commands with softdeps
Lucas De Marchi [Fri, 30 Mar 2012 20:37:20 +0000 (13:37 -0700)]
Documentation: replace install commands with softdeps

Install commands should not be used to specify soft dependencies among
modules. When loading modules it's much better to have a softdep that
modprobe knows what's being done than having to fork/exec another
instance of modprobe to load the other module.

By using a softdep user has also an option to remove the dependencies
when removing the module (and if its refcount dropped to 0)

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: remove references to /etc/modprobe.conf
Lucas De Marchi [Fri, 30 Mar 2012 20:37:16 +0000 (13:37 -0700)]
Documentation: remove references to /etc/modprobe.conf

Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: input.txt: clarify mousedev 'cat' command syntax
Randy Dunlap [Fri, 30 Mar 2012 20:37:13 +0000 (13:37 -0700)]
Documentation: input.txt: clarify mousedev 'cat' command syntax

Clarify that the 'cat' command does not include the (c, 13, 32)
after it.

Reported-by: Dan Jidanni Jacobson <jidanni@jidanni.org>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: CodingStyle: add inline assembly guidelines
Josh Triplett [Fri, 30 Mar 2012 20:37:10 +0000 (13:37 -0700)]
Documentation: CodingStyle: add inline assembly guidelines

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: sysrq: Crutcher Dunnavant is unavailable
Randy Dunlap [Fri, 30 Mar 2012 20:37:06 +0000 (13:37 -0700)]
Documentation: sysrq: Crutcher Dunnavant is unavailable

Reported-by: Křištof Želechovski <giecrilj@stegny.2a.pl>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: mention scripts/diffconfig tool
Javi Merino [Fri, 30 Mar 2012 20:37:02 +0000 (13:37 -0700)]
Documentation: mention scripts/diffconfig tool

The kconfig documentation suggests using plain 'diff' to compare config
files and then adds "Yes, we need something better here".  Commit
a717417e7f96 ("kconfig: add diffconfig utility") added what that comment
was looking for.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoDocumentation: remove 'mach' from dontdiff file
H Hartley Sweeten [Fri, 30 Mar 2012 20:36:58 +0000 (13:36 -0700)]
Documentation: remove 'mach' from dontdiff file

The mach entry in the dontdiff file causes all the
arch/arm/mach-*/include/mach directories to be skipped.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>