hwg [Sat, 28 Feb 2015 09:06:56 +0000 (17:06 +0800)]
remove unused wifi driver: rda5990, mt5931, mt7601, mt6620
hwg [Sat, 28 Feb 2015 06:05:32 +0000 (14:05 +0800)]
support different wifi bt chip auto compatible
like auto recognize rtl8188eu, ap6210, esp8089 in android
hwg [Sat, 28 Feb 2015 06:03:13 +0000 (14:03 +0800)]
support different wifi bt chip auto compatible
modify arch/arm/boot/dts/rk3128-86v.dts
hwg [Sat, 28 Feb 2015 06:02:56 +0000 (14:02 +0800)]
support different wifi bt chip auto compatible
modify arch/arm/boot/dts/rk3126-86v.dts
hwg [Sat, 28 Feb 2015 05:59:24 +0000 (13:59 +0800)]
support different wifi bt chip auto compatible
Attention: this is only for android 5.0, not compatible for android 4.4, meaning can't compatible for 4.4 after this commit
modify arch/arm/boot/dts/rk3288-tb_8846.dts
dkl [Thu, 26 Feb 2015 01:44:34 +0000 (09:44 +0800)]
rk312x/rk3036: not change aclk_core_div for stability
In rk312x/rk3036, do not change aclk_core_div for stability.
Also remove some unusued macros and codes.
Signed-off-by: dkl <dkl@rock-chips.com>
dalon.zhang [Sat, 14 Feb 2015 10:18:09 +0000 (18:18 +0800)]
camera: oneframe v0.1.f
Zheng Yang [Sat, 14 Feb 2015 08:22:35 +0000 (16:22 +0800)]
HDMI:
1. In DVI mode, input color and output color should be RGB[0-255];
In HDMI mode, input color should be YCbCr;
2. For MID, HDMI is default disabled.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Sat, 14 Feb 2015 01:14:18 +0000 (09:14 +0800)]
hdmi: hdmiv1:
For nlpcm bitstream mode, we need to set audio
channel status nlpcm bit to 1.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Sat, 14 Feb 2015 00:51:54 +0000 (08:51 +0800)]
hdmi: fix set hdmi switch state error when remove hdmi.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hwg [Fri, 13 Feb 2015 07:02:37 +0000 (15:02 +0800)]
update rtl8189es wifi driver to rtl8189ES_linux_v4.3.10.1_13373.
20150129
hwg [Thu, 12 Feb 2015 07:02:51 +0000 (15:02 +0800)]
update rtl8188eu wifi driver to RTL8188EUS_linux_v4.3.0.7_12758.
20141114
lyz [Thu, 12 Feb 2015 02:16:32 +0000 (10:16 +0800)]
usb: dwc_otg: show warning on actual buffer length larger than
transfer buffer length
In this case DWC_OTG controller will over-write memory space that
not belongs to this urb, it may cause kernel crash.
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Wed, 11 Feb 2015 02:59:23 +0000 (10:59 +0800)]
usb: ehci: fix test packet mode
When enter usb test packet mode the device no longer connect
normally, so stop the connect detect timer
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Tue, 27 Jan 2015 07:53:53 +0000 (15:53 +0800)]
usb: dwc_otg: add condition judgement to filter invalid
disconnect interrupt
In some case, we disconnect a usb device, then usb controller
will trigger more the one disconnect interrupt, so check port
enable change bit in hprt0 to make sure just one disconnect
interrupt be handled.
here to
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Tue, 27 Jan 2015 03:46:38 +0000 (11:46 +0800)]
usb: ehci-rockchip: fix typo
'work around' should be 'walk around'
Signed-off-by: lyz <lyz@rock-chips.com>
hjc [Wed, 11 Feb 2015 03:54:29 +0000 (11:54 +0800)]
rk fb: fix fence time out for dual display mode
Signed-off-by: hjc <hjc@rock-chips.com>
dkl [Tue, 10 Feb 2015 03:01:25 +0000 (11:01 +0800)]
dts: rk3126\rk3126b: modify VIO clocks to slove VIO idle fail problem
In rk3126, when aclk_vio0\aclk_vio1\hclk_vio were reparented from the
default parent gpll_div2 to gpll in clk_init, the temporary rates
are too high and may lead to failture in VIO idle_request later.
To slove this problem, VIO clocks are modified to auto select parent
and consider the order of reparent and set_div when set_rate.
Signed-off-by: dkl <dkl@rock-chips.com>
ywj [Tue, 10 Feb 2015 01:23:33 +0000 (09:23 +0800)]
add usb charge config
Zheng Yang [Mon, 9 Feb 2015 02:42:19 +0000 (10:42 +0800)]
rk3288 hdmi: If audio source if spdif, sclk/fs should be 128x.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Mon, 9 Feb 2015 02:40:40 +0000 (10:40 +0800)]
HDMI: fix filter feature SUPPORT_TMDS_600M error:
If soc is not support feature SUPPORT_TMDS_600M,
or current EDID information is not support the
feature, we should not show the corresponding
option, such as 3840x2160p-60.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
David Wu [Sun, 8 Feb 2015 13:38:22 +0000 (21:38 +0800)]
i2c: fix retry_count to return error when i2c bus checkidle was low
Signed-off-by: David Wu <wdc@rock-chips.com>
hwg [Thu, 5 Feb 2015 02:51:07 +0000 (10:51 +0800)]
rfkill-wlan.c: solve null point panic when wifi_chip_type is not define in dts
li bing [Tue, 3 Feb 2015 07:31:46 +0000 (15:31 +0800)]
wifi->esp8089:
ESP8089 driver update to V1.9.1(30/01/2015);
Update the V2.4 esp_prealloc program.
Zheng Yang [Tue, 3 Feb 2015 07:51:18 +0000 (15:51 +0800)]
hdmi:
1. fix 3288 hdmi audio source select error.
2. For mid, it need to call rk_fb_get_display_policy
to reset overscan after swichting vop timing.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
dkl [Tue, 3 Feb 2015 06:15:27 +0000 (14:15 +0800)]
rk3288: modify to ensure pairwise call of clk_enable\disable
in rk3288_pll_early_suspend_notifier_call
Signed-off-by: dkl <dkl@rock-chips.com>
Zheng Yang [Mon, 2 Feb 2015 07:04:21 +0000 (15:04 +0800)]
hdmi: depends on DRM_ROCKCHIP and fix document error.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
lintao [Mon, 2 Feb 2015 03:26:48 +0000 (11:26 +0800)]
dts: fix compile err
Signed-off-by: lintao <lintao@rock-chips.com>
Zheng Yang [Mon, 2 Feb 2015 03:06:04 +0000 (11:06 +0800)]
hdmi: update driver to v2.0:
1. Rename rk3036 hdmi to rockchip_hdmiv1, support hdmi v1.4;
2. Rename rk3288 hdmi to rockchip_hdmiv2, support hdmi v2.0;
3. Support transmmit 3D picture.
4. 3288 hdmi support HDCP, CEC and TMDSCLK 600M.
5. HDMI video source default is LCDC0, it can be modified in dts by
follow:
rockchip,hdmi_video_source = <DISPLAY_SOURCE_LCDC1>;
HDCP and CEC function default is disabled , it can be enabled in
dts file by follow:
rockchip,hdcp_enable = <1>;
rockchip,cec_enable = <1>;
More information please see
Documentation/devicetree/bindings/video/rockchip_hdmi.txt
lintao [Mon, 2 Feb 2015 02:21:25 +0000 (10:21 +0800)]
dts: rk312x: default enable emmc
Signed-off-by: lintao <lintao@rock-chips.com>
lintao [Mon, 26 Jan 2015 01:57:11 +0000 (09:57 +0800)]
mmc: add more waiting for erase and status op
Zheng Yang [Sun, 1 Feb 2015 08:28:03 +0000 (16:28 +0800)]
rk3288 hdmi: add cec clk and pinctrl.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Zheng Yang [Sun, 1 Feb 2015 08:24:58 +0000 (16:24 +0800)]
rk3288 hdmi:
To improve stability of reading EDID, we need to
disable HDMI ddc GPIO internal pull up.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
zyc [Fri, 30 Jan 2015 01:42:23 +0000 (09:42 +0800)]
camera: oneframe v0.1.e
hwg [Thu, 29 Jan 2015 09:29:03 +0000 (17:29 +0800)]
solve rfkill-wlan driver kernel panic when rfkill-bt driver probe fail
li bing [Thu, 29 Jan 2015 07:01:37 +0000 (15:01 +0800)]
Wifi->rtl8812au: add chip name /sys/class/rkwifi/chip for RTL8812BU
li bing [Thu, 29 Jan 2015 06:09:41 +0000 (14:09 +0800)]
Wifi->rtl8723au: update dirver to version 4.00(4.1.11_12622.
20141215).
smj [Thu, 29 Jan 2015 00:51:26 +0000 (08:51 +0800)]
rk312x codec: fix rk312x codec switch state error
Signed-off-by: lxt <lxt@rock-chips.com>
Zheng Yang [Wed, 28 Jan 2015 10:13:37 +0000 (18:13 +0800)]
modify display-sys.c and display-sys.h code style.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
zwl [Wed, 28 Jan 2015 07:50:05 +0000 (15:50 +0800)]
rk3128: hdmi: add disable clock when system shutdown
disable clock will call disable power domain.
hdmi and lcdc share the power domain, so they must disable
the power domain when system shutdown.
Signed-off-by: zwl <zwl@rockchips.com>
Simon [Wed, 28 Jan 2015 07:30:26 +0000 (15:30 +0800)]
rockchip: iommu: skip rk312x vop mmu stall operation,mask rk312x vop mmu interrupt
Video stress test failed, may have something relationship to vop mmu stall operation
skip it as a workaround
Reboot stress test failed, error showed a large number of vop/vop mmu interrupt,mask
vop mmu interrupt to avoid reboot stress test failed in rk312x
Signed-off-by: Simon <xxm@rock-chips.com>
zyc [Wed, 28 Jan 2015 03:24:21 +0000 (11:24 +0800)]
camera: camsys_drv:v0.0x1b.0 oneframe:v0.1.0xd
dalon.zhang [Wed, 28 Jan 2015 02:12:32 +0000 (10:12 +0800)]
rk312x: fix usb otg camera issues
chenzhen [Mon, 26 Jan 2015 08:10:22 +0000 (16:10 +0800)]
mali_400_driver :
use mod_timer in mali_control_timer_callback_chain.
upgrade rk_ko_ver to 3.
chenzhen [Wed, 7 Jan 2015 06:30:56 +0000 (14:30 +0800)]
rk312x, mali_400_driver : ammend rk_ko_ver.txt.
hcy [Mon, 26 Jan 2015 01:13:52 +0000 (09:13 +0800)]
Support 1.5GB and 3GB with 2CS on the DDR1 channel
lyz [Fri, 23 Jan 2015 09:05:14 +0000 (17:05 +0800)]
usb: dwc_otg: handle data toggle error in right way
data toggle error without a ChannelHalt status is not a real data
toggle err, it is a transfer error state so just clear the
interrupt bit rather than resubmit this request
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Mon, 19 Jan 2015 10:55:56 +0000 (18:55 +0800)]
usb: dwc_otg: fix issue with race condition of competition
between hcd_reinit() and cil_interrupt handler.
hcd_reinit() should get core_if->lock before modify this
lock, so that can prevent competition between cil_interrupt
handler and hcd_reinit(), hcd_reinit() be scheduled while
cil_interrupt handler holding core_if->lock, hcd_reinit() modify
the lock then previous core_if->lock will never be unlocked.
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Mon, 19 Jan 2015 11:17:37 +0000 (19:17 +0800)]
usb: dwc_otg: double check disconnect state when otg state
changed
When otg stop host mode and before change to device mode hcd_stop
function should do something to double check all usb device is
disconnect because the disconnect interrupt might be lost.
1.kill all active urbs attached to this hcd
2.set hcd->flags to notify usb core to disconnect all usb devices
Signed-off-by: lyz <lyz@rock-chips.com>
zwl [Thu, 22 Jan 2015 06:14:43 +0000 (14:14 +0800)]
rk fb: new display framework for dual display mode
move extend display(HDMI) configuration to hareware composer lib
and support dual different display.
Need update: hareware composer lib.
Signed-off-by: xzj <xzj@rockchips.com>
Signed-off-by: zwl <zwl@rockchips.com>
Alpha Lin [Wed, 21 Jan 2015 00:47:18 +0000 (08:47 +0800)]
RK32: vpu disable iommu when vpu catch a failure.
Disable iommu when vpu in failure state, so iommu could
restore its state in the next task in.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
zsq [Tue, 20 Jan 2015 08:38:18 +0000 (16:38 +0800)]
open rga soft reset for 312x platform
roger [Tue, 20 Jan 2015 07:51:51 +0000 (15:51 +0800)]
ethernet:vmac: support multicast
lintao [Tue, 20 Jan 2015 07:11:18 +0000 (15:11 +0800)]
mmc: rk: differ force jtag for rk3036 & rk312x
Signed-off-by: lintao <lintao@rock-chips.com>
qjb [Tue, 20 Jan 2015 02:28:07 +0000 (10:28 +0800)]
ddr_freq: fix when enable armtrustzone ,then ddr_freq error.
Luowei [Mon, 19 Jan 2015 05:52:38 +0000 (13:52 +0800)]
szy modify cvbs TV_BRIGHTNESS_CONTRAST to 0x0000770a
Mark Yao [Mon, 19 Jan 2015 04:33:48 +0000 (12:33 +0800)]
rk_fb: DSP_INFO use xact/yact when win not support scale
xact/yact means display buffer size, if use xsize/ysize,
maybe out of buffer size range, that would cause iommu crash.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Xiao Feng [Fri, 16 Jan 2015 02:51:53 +0000 (10:51 +0800)]
rockchip: cpufreq: move cpufreq_reboot_notifier from ddr_freq to cpufreq
Signed-off-by: Xiao Feng <xf@rock-chips.com>
lyz [Sun, 18 Jan 2015 15:37:11 +0000 (23:37 +0800)]
usb: dwc_otg: fix a spin-lock error, here should not goto return
without unlock hck->lock
Zhaoyifeng [Fri, 16 Jan 2015 01:30:07 +0000 (09:30 +0800)]
nand: add idb read function for drmboot.ko for read idb data.
许盛飞 [Fri, 16 Jan 2015 00:47:06 +0000 (08:47 +0800)]
rk312x: the bug of ddr-resume. phy soft de-reset dll
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
typ [Thu, 15 Jan 2015 06:20:09 +0000 (14:20 +0800)]
rk312x ddr:idle prot,deidle prot clk gate err and ddr resume phy softdereset sequence
lyz [Thu, 15 Jan 2015 05:13:03 +0000 (13:13 +0800)]
usb: dwc_otg: fix some issues of dwc_otg_310
1.disable host interrupts when id changed so that no more host
interrupt will happen after otg disconnect
2.hold hcd->lock in hcd_reinit function to protect qtd list
3.recheck USB_STATUS_ID in vbus detect thread make sure it indeed
in device mode
4.fix some null pointer dereference
5.otg disconnect threshold set to 575mv in case of disconnect
interrupt lose
lintao [Mon, 29 Dec 2014 08:34:22 +0000 (16:34 +0800)]
mmc: backport tmo mechanism
Signed-off-by: lintao <lintao@rock-chips.com>
lintao [Thu, 25 Dec 2014 06:59:26 +0000 (14:59 +0800)]
mmc: rk_sdmmc: change slot.cd_gpio from edge to level detect
Alpha Lin [Wed, 14 Jan 2015 08:19:30 +0000 (16:19 +0800)]
IEP: recover the code that mistaken remove
Recover the code that remove in previous coding-style commit.
Without this code, hw could not running proberly.
Signed-off-by: Alpha Lin <alpha.lin@rock-chips.com>
zyc [Wed, 14 Jan 2015 07:27:45 +0000 (15:27 +0800)]
camera :fix oneframe compile warnning
guoyi [Wed, 14 Jan 2015 07:05:07 +0000 (15:05 +0800)]
sensor: fix mpu6880_acc.c waring.
guoyi [Wed, 14 Jan 2015 06:47:18 +0000 (14:47 +0800)]
sensor: add mpu6880's accel and gyro support.
yzq [Wed, 14 Jan 2015 06:22:46 +0000 (14:22 +0800)]
rk312x_lcdc: fix lcdc irq abnormal when shutdown
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
xiaoyao [Wed, 14 Jan 2015 05:30:01 +0000 (13:30 +0800)]
Initialization and support 3128-86v
zyc [Wed, 14 Jan 2015 03:58:37 +0000 (11:58 +0800)]
camera: oneframe : v0.1.0xc
张晴 [Wed, 14 Jan 2015 03:44:20 +0000 (11:44 +0800)]
rk312x:pmic:rt5036:slove rt5036 irq locked
Signed-off-by: 张晴 <zhangqing@rock-chips.com>
qjb [Tue, 13 Jan 2015 11:21:28 +0000 (19:21 +0800)]
rk3288 sec dts : modify ion drm config
xxh [Tue, 13 Jan 2015 06:43:39 +0000 (14:43 +0800)]
modify chip name /sys/class/rkwifi/chip for 8723BU
Simon [Tue, 13 Jan 2015 06:25:24 +0000 (14:25 +0800)]
rockchip: iommu: only disable rk312x iommu stall mode
Signed-off-by: Simon <xxm@rock-chips.com>
huang zhibao [Tue, 13 Jan 2015 06:38:51 +0000 (14:38 +0800)]
rk3036: add 3036 new board dts and modify 3036 256M defconfig
Zheng Yang [Tue, 13 Jan 2015 06:13:06 +0000 (14:13 +0800)]
rk_fb & rk3036 lcdc & rk312x lcdc:
1. Modify box display policy, rk_fb_update_reg() need to check yuv420
format.
2. When power up in uboot logo mode, if rk_fb_switch_screen input screen
type is not equal to current screen type, exit uboot logo mode. For
the case of display interface change happen at the moment of kernel
initialization.
3. Fox box, if RK_FBIOSET_YUV_ADDR input address is zero, we close related
lcdc layer. Because RK_FBIOSET_ENABLE may not be called by application,
especially at low memory enviorment,such as rk3036 256M ram.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
hwg [Tue, 13 Jan 2015 06:07:00 +0000 (14:07 +0800)]
wifi: add rtl8189es cob efuse file
only for cob design, custom should retest their machine wifi rf and update wifi_efuse_8189e.map
lintao [Tue, 13 Jan 2015 04:54:45 +0000 (12:54 +0800)]
mmc: rk_sdmmc: limit burst to 8 for rk3036 w/ pl330
Signed-off-by: lintao <lintao@rock-chips.com>
zyc [Tue, 13 Jan 2015 02:54:55 +0000 (10:54 +0800)]
camera: camsys_drv:v0.0x1a.0 oneframe:v0.1.0xb
dkl [Tue, 13 Jan 2015 01:31:44 +0000 (09:31 +0800)]
clk: rockchip: cru_readl use readl_relaxed instead of readl,
cru_writel use writel_relaxed instead of writel
Signed-off-by: dkl <dkl@rock-chips.com>
许盛飞 [Mon, 12 Jan 2015 03:43:27 +0000 (11:43 +0800)]
rk818-battery: fix POWER_SUPPLY_PROP_PRESENT val error, and add Li-ion battery check
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
许盛飞 [Mon, 12 Jan 2015 03:40:45 +0000 (11:40 +0800)]
rk818-battery: fix Division by zero in kernel, and update regs definition
Signed-off-by: 许盛飞 <xsf@rock-chips.com>
lyz [Sat, 10 Jan 2015 11:08:16 +0000 (19:08 +0800)]
usb: manual delay 8s to enable connect pc
Android generate Serial number too later than set 1 to
sys/class/android_usb/android0/enable. So here we have to manual
delay some time to enable usb connect in usb controler driver,
otherwise adb read a wrong serial number via usb then CTS test
will fail.
Signed-off-by: lyz <lyz@rock-chips.com>
lyz [Tue, 23 Dec 2014 09:54:35 +0000 (17:54 +0800)]
usb: rk312x: fix wrong clk name
Signed-off-by: lyz <lyz@rock-chips.com>
xxh [Fri, 9 Jan 2015 09:38:08 +0000 (17:38 +0800)]
3.10 kernel support more Huawei 3G dongles
xxh [Fri, 9 Jan 2015 08:47:56 +0000 (16:47 +0800)]
Merge branch 'develop-3.10' of ssh://10.10.10.29/rk/kernel into xxh_develop
xxh [Fri, 9 Jan 2015 08:47:40 +0000 (16:47 +0800)]
UPDATE 8723BU WIFI driver
zwl [Fri, 9 Jan 2015 08:34:08 +0000 (16:34 +0800)]
rk fb: remove map fb which from android to economize vmalloc space
Signed-off-by: zwl <zwl@rockchips.com>
hwg [Fri, 9 Jan 2015 07:23:50 +0000 (15:23 +0800)]
rk312x UART0_SOUT UART0_SIN default pull down disable
may case bt can't open problem
qjb [Fri, 9 Jan 2015 03:03:39 +0000 (11:03 +0800)]
TrustZone: Add Support Trust OS
if Trust OS running ,
- disable ddr_freq
- disable fiq debug
qjb [Fri, 9 Jan 2015 02:00:04 +0000 (10:00 +0800)]
Revert "TrustZone: Add Support Trust OS"
This reverts commit
940a3100bdd90dc3de257c2e185e370374fb20e8.
hwg [Fri, 9 Jan 2015 01:04:24 +0000 (09:04 +0800)]
wifi: support rtl8723bs-vq0 cob
qjb [Wed, 7 Jan 2015 07:17:38 +0000 (15:17 +0800)]
sec dts: Add rk3288 tb secure dts
qjb [Wed, 7 Jan 2015 07:16:52 +0000 (15:16 +0800)]
defconfig : Add rockchip secure defconfig
qjb [Wed, 7 Jan 2015 07:16:14 +0000 (15:16 +0800)]
TrustZone: TLK before the start of the temporary closure of MMU
qjb [Wed, 7 Jan 2015 07:15:31 +0000 (15:15 +0800)]
TrustZone: Add Support Trust OS
if Trust OS running ,
- disable ddr_freq
- disable fiq debug
qjb [Wed, 7 Jan 2015 03:56:55 +0000 (11:56 +0800)]
TrustZone: Add TrustZone Driver
Add the communication with the TLK interface driver.
Huang, Tao [Wed, 7 Jan 2015 06:21:55 +0000 (14:21 +0800)]
rk29_wdt: fromdos only
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>