staging: rtl8192e use kmemdup and check its return value

use kmemdup instead of kmalloc and memcpy,
and check its return value

Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8187se: check kmalloc return value

check kmalloc return value

Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: FIX for bug that prevents system from entering suspend state

The attempt to enter to suspend mode can be hindered when the network
interface is disabled.

When system enters the suspend mode with the network interface
disabled, network layer calls ifdown() followed by cfg80211 layer
calling wl_cfg80211_suspend() which is registered as suspend handler
for cfg80211 layer.

ifdown() call ultimately funnels down to __wl_cfg80211_down() call
where WL_STATUS_READY bit is cleared via call to
"clear_bit(WL_STATUS_READY, &wl->status)"

But CHECK_SYS_UP()checks WL_STATUS_READY bit thinking it's not ready
and returns -EIO from suspend handler which intern prevents entering
into system suspend state

CHECK_SYS_UP() is mainly used in the code path where upper layer would
request certain wifi related activity to be performed by the firmware,
where this calls helps to make sure our firmware would be in ready
state to respond to those requests

But in the case of wl_cfg80211_suspend() code path there is no need to
check for firmware status for any reason

Signed-off-by: Dowan Kim <dowan@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rts_pstor: fix a bug that a greenhouse sd card can't be recognized

A greenhouse sd card can't be recognized using rts5209.
To fix this bug, these modifications are applied:
1, Move some codes which clear sd internal variables from sd_init_type to
sd_prepare_reset. So sd_init_type is useless any more and is removed
entirely;
2, If a sd card can't pass sd3.0 mode, the action of tunning phase should be
avoided when retrying sd2.0 mode.

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: sep: remove unused ioctls

Also remove associated functions, structures, and defines

Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Merge ENE UB6250 SD card codes from keucr to drivers/usb/storage

The usb portion of this driver can now go into drivers/usb/storage.
This leaves the non-usb portion of the code still in staging.

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: unused Remove dot11PowerSaveMode and RT_PS_MODE

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move card specific structures out of ieee80211 library header

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Delete unused members from struct r8192_priv

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Delete non-existing function declarations

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Delete unused dm_change_dynamic_initgain_thresh

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Pass r8192_priv to MgntActSet_RF_State

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Pass r8192_priv around instead of net_device

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove redundant function declarations

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Pass r8192_priv around instead of net_device

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Convert more functions to use r8192_priv

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Pass r8192e_priv to phy functions

Phy functions shouldn't be associated with net_device.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Pass r8192_priv to eprom_read

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move PowerSaveControl to r8192e_priv

This variable is not used by the ieee80211 library, so
move it rtl8192e's private struct.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move variables to ieee80211 struct

Move variables only accessed by the RTL ieee80211 library into its
private struct.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move definition of RT_RF_CHANGE_SOURCE

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move RfOffReason to r8192e_priv struct

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Move eRFPowerState to r8192e_priv struct

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove pointless hw_sleep_wq

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove unnecessary ps_lock

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Use single spinlock in MgntActSet_RF_State

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove SetRFPowerState

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove SetRFPowerStateInProgress

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Add a spinlock around SetRFPowerState8190

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: gma500: fix build errors

This patch will fix following compilation error:

drivers/staging/gma500/psb_drv.c:1635: error: unknown field ‘pci_driver’ specified in initializer
drivers/staging/gma500/psb_drv.c:1636: error: unknown field ‘name’ specified in initializer
drivers/staging/gma500/psb_drv.c:1636: warning: initialization from incompatible pointer type
drivers/staging/gma500/psb_drv.c:1637: error: unknown field ‘id_table’ specified in initializer
drivers/staging/gma500/psb_drv.c:1637: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1637: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1638: error: unknown field ‘resume’ specified in initializer
drivers/staging/gma500/psb_drv.c:1638: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1638: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1639: error: unknown field ‘suspend’ specified in initializer
drivers/staging/gma500/psb_drv.c:1639: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1639: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1640: error: unknown field ‘probe’ specified in initializer
drivers/staging/gma500/psb_drv.c:1640: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1640: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1641: error: unknown field ‘remove’ specified in initializer
drivers/staging/gma500/psb_drv.c:1641: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1641: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1643: error: unknown field ‘driver’ specified in initializer
drivers/staging/gma500/psb_drv.c:1643: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1643: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c: In function ‘psb_init’:
drivers/staging/gma500/psb_drv.c:1664: error: implicit declaration of function ‘drm_init’
drivers/staging/gma500/psb_drv.c: In function ‘psb_exit’:
drivers/staging/gma500/psb_drv.c:1669: error: implicit declaration of function ‘drm_exit’

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: gma500: Resync the patch queue with GregKH's space cleanup.

Remove all sorts of bits we can get rid of. We are now a very simple KMS
driver relying on the stolen memory for our framebuffer base (which is for
the moment hardcoded).

To support multiple frame buffers and some accel bits we will need some kind
of memory allocator, possibly a minimal use of GEM.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: use kernel byteorder functions

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: remove unused typedef VOID

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: convert comparison to NULL into boolean

convert if (NULL != ptr) to if (ptr)
convert if (NULL == ptr) to if (!ptr)

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: replace if(false == var) with if (!var)

    's/(false == \([^ ]\+\))/(!\1)/g'

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: replace if(true == var) with if (var)

's/(true == \([^ ]\+\))/(\1)/g'

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: more style fixing in easycap_main.c

mostly indentation fixes and some line over 80 characters fixes

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: remove private ioctls

Drop the badly defined and broken private ioctl interface. Since the
driver is in staging, and some of the ioctls are clearly unsafe or not
even working, it's unlikely that there are any users.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: lirc: fix for "lirc_dev: lirc_register_driver: driver pointer must be not NULL!"

Unable to load the module lirc_parallel without the attached patch.

Signed-off-by: Thomas Viehweger <patchesThomas.Vie@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: remove unneeded function forward declaration

When the code moved around earlier, this function declaration should
have been removed but it wasn't.  Resolve that.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up guid variable name

It wasn't a global either, yet it was called one for some reason...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: get rid of hungarian notation for name of the module

And, it's not even a global, so the original creator got the Hungarian
notation wrong!  {sigh}

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up camelcase fields in struct mousevsc_prt_msg

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up camelcase usage in struct pipe_prt_msg

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up pipe size field name

Make it not camelcase.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up camelcase use for enum pipe_prot_msg_type in structures

It's a type, so call it that.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: use an anonymous union for struct mousevsc_prt_msg

Much nicer than having an ugly 'u.' in the structure usage, welcome to
the 2000's...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: clean up camelcase in struct synthhid_input_report

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix camelcase in struct synthhid_device_info_ack

Just one field to fix up, s/Reserved/reserved/g
Odd that we have to set the reserved field to 0 when we send the
message, that would imply that it really isn't "reserved"...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: use a real struct hid_descriptor

The data coming from the vmbus is really a hid descriptor, so use that
structure instead of having to mess around with a character array and
pointer fun.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: clean up camelcase when using struct hv_input_dev_info

I think there's a callback we can remove that uses this variable in the
future as well, but that's for another patch...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: clean up camelcase in struct synthhid_protocol_response

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: clean up version structure usage

Turns out no one uses the major or minor fields, but hey, we'll keep
them around just to make people feel happy...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: change camelcase for struct synthhid_msg

Turns out no one references the data field of this structure, so I
wonder if it's really even needed at all.  All this is used for is the
type of the message here, so this structure might be able to be dropped
entirely in the future.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix build warning

The trans_id variable (u64) was being incorrectly cast to a unsigned
long * when it should have just been unsigned long.

Fun with pointers, what a fricken mess, we need some real type safety
for these types of fields somehow...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix camelcase use of struct synthhid_msg_hdr

s/Header/header/g for this structure when it is used in the file.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse.c: clean up struct synthhid_msg_hdr

Use non-CamelCase names for this structure.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: use proper input define for bus type

The code was so close, the bus type was in a comment, so go all the way
and actually use the define here.  It's as if the original author was so
afraid of license issues if they referenced a define in the processed
code but they felt safe to keep it in a comment.  Chicken.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up input device info structure

Make the name "hv_" specific as it's not an input layer structure we are
dealing with here.  Also rename the fields to be not CamelCase.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: reorder functions to remove forward declarations

This removes almost all forward declarations and makes all functions
static, as there should not be any global functions in this module at
all.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: remove inline function markings

They are totally useless here, so remove them.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse.c: remove struct mousevsc_drv_obj function callbacks

They aren't needed at all either because they are never called (OnOpen,
OnClose), or because we can just call the real function instead as it's
never set to anything else.

Just another step in unwinding the callback mess...

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: unwind the initialization process a bit

This unwinds the init call sequence a bit, as we don't need a callback
pointer for a function that is already in this file.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: remove typedefs

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: delete mousevsc_api.h

This file is only used by one .c file (hv_mouse.c) so just move the
whole thing into that file.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: delete vmbus_hid_protocol.h

The .h file is not needed as only one .c file uses it, so just move
it into that file.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: fix up copyright and license header

Use the proper license header from the other hv drivers and remove the
nonsense about derivative works, as it's rubbish.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: rename hv_mouse_drv.c

As there's only one file for this driver, just name it the same
as the end module name, saving one build/link step and making it
simpler in the end.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse: delete mouse_vsc.c

Move the mouse_vsc.c file into hv_mouse_drv.c as it makes
no sense to have two files here, as we don't have to worry about the
"closed vs. open" split that this code was originally written for.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mouse_vsc: fix comment coding style

Also mark this as a nice FIXME as we shouldn't ever
care about the value of an atomic variable, which makes me seriously
doubt the validity of this reference counting code.  Odds are it can be
ripped out completly, or at the very least, converted to using a kref.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mouse_vsc: fix space coding style issues

Lots of minor space cleanups to resolve coding style warnings and
errors.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mouse_vsc.c: fix brace coding style issues

Minor brace coding style issue cleanups.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: hv_mouse_drv.c: minor coding style cleanups

Knock off some of the simple coding style issues in this file

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: enable mouse driver to build

But we disable it from automatically loading as that would
be bad.  This way people can build it easier and start cleaning
it up, as it needs it.

Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove osl source files from driver

The whole need for the OSL concept has been removed from the driver. This
is the final commit removing the source file and include file from the
driver repository. All include statements of osl.h have been removed from
the other source files.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove struct osl_info from driver sources

The struct osl_info was being used only in attach functions but
previous changes make the entire usage of this structure obsolete.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove struct osl_info from function prototypes

A couple of functions with struct osl_info do not use this parameter
so it is removed from the function prototypes.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove counting of allocated sk_buff packets

The function pkt_buf_get_skb and pkt_buf_free_skb were using struct
osl_info field pktalloced to maintain counter of buffers in use in
the driver. It was decided to remove this facility. The prototypes
of these functions have been modified and the calling code adapted.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove of type definition osldma_t

The usage of variable of this type is not required so its use has
been removed from the driver.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleanup declaration in osl.h

Several declarations and macro definitions in osl.h are still needed
and therefore moved to bcmutils.h or hnddma.h. The osl_assert function
is moved to bcmutils.c accordingly.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused attributes from struct osl_info

Getting rid of the whole osl concept soon this removes most fields
in struct osl_info. Turned out hnddma.c was still using it so this
was fixed and now it gets pointer to bus device from si_info which
it only needs in the attach function for this purpose so reference
to it does not need to be kept. Two unused functions referencing
the removed fields in linux_osl.c also were removed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed struct osl_info usage from fullmac driver

Several occurrences in fullmac using struct osl_info could be removed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove function prototypes from wl_export.h

The include file wl_export.h contained several function prototypes
(and one macro defintion) that were not used or implemented within
the driver.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move frameid initialization in wlc_d11hdrs_mac80211

Minor esthetical change to do initialization immediately at declaration.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove osl_info usage in wlc_main and wl_mac80211

Getting rid of osl concept taking small steps. This commit removes
it from wlc_main.c and wl_mac80211.c.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove struct osl_info usage from phy sources

Getting rid of osl concept taking small steps. This commit removes
it from source files in brcm80211/brcmsmac/phy directory.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove struct osl_info usage from wlc_bmac

Getting rid of osl concept taking small steps. This commit removes
it from wlc_bmac.c.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace simple_strtoul with strict_strtoul

By checkpatch recommendation using strict_strtoul now.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: changed module wlc_mac80211 to wlc_main

The source and include file for the wlc_mac80211 module has been
renamed to wlc_main and subsequently the include statement in
other source files. This module provides the main interface towards
wl_mac80211 module.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: echo: fix a typo ("overflow")

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/usbip: convert to kthread

usbip has its own infrastructure for managing kernel
threads, similar to kthread. By changing it to use
the standard functions, we can simplify the code
and get rid of one of the last BKL users at the
same time.

Includes changes suggested by Max Vozeler.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Clean up switching to power saving mode.

When switching to power saving mode we only need to notify
the receiver when in infrastructure mode.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Ensure power.c uses proper tabbing.

Simplify setting of power state in power.c when sending power
state notifications to the access point.

Signed-off-by: Philip Worrall <philip.worrall at googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Clean up spaces around parenthesized expressions

Clean up a number of places where unneeded spaces are used around
expressions.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Clean up return from sending power state notifications

Clean up power.c so that unnecessary final return statements
are not used when sending power state notifications to
the access point.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Clean up unneccessary braces in power.c

Clean up some unnecessary braces for conditional statements
where a single statement will do.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Use C89 comments in power.c

Reformat the comments in power.c to use the C89 commenting
style instead of the C99 commenting style.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Ensure power.c uses proper tabbing.

Cleanup power.c to use proper tabbing as per coding standards.

Signed-off-by: Philip Worrall <philip.worrall@googlemail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: remove unused TLV defines

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

brcm80211: use proper ieee80211 routines

removed the following defines as a side effect:
- FC_SUBTYPE_ANY_QOS
- FC_KIND_MASK
- FC_PROBE_REQ
- FC_PROBE_RESP
- FC_BEACON
- FC_PS_POLL
- FC_RTS
- FC_CTS

also fixed possible bug when the CPU byte ordered fc was passed into
ieee80211_is_data and ieee80211_is_mgmt

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>