firefly-linux-kernel-4.4.55.git
12 years agolib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel
Wu Fengguang [Mon, 9 Jan 2012 17:53:50 +0000 (11:53 -0600)]
lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel

commit 3310225dfc71a35a2cc9340c15c0e08b14b3c754 upstream.

PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs
in the below lines of bdi_dirty_limit():

bdi_dirty *= numerator;
do_div(bdi_dirty, denominator);

1) divide error: do_div() only uses the lower 32 bit of the denominator,
   which may trimmed to be 0 when PROP_MAX_SHIFT > 32.

2) overflow: (bdi_dirty * numerator) could easily overflow if numerator
   used up to 48 bits, leaving only 16 bits to bdi_dirty

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Tested-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohwmon: (f75375s) Fix bit shifting in f75375_write16
Nikolaus Schulz [Wed, 8 Feb 2012 17:56:10 +0000 (18:56 +0100)]
hwmon: (f75375s) Fix bit shifting in f75375_write16

commit eb2f255b2d360df3f500042a2258dcf2fcbe89a2 upstream.

In order to extract the high byte of the 16-bit word, shift the word to
the right, not to the left.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: no lvds quirk for AOpen MP45
Daniel Vetter [Wed, 8 Feb 2012 15:42:52 +0000 (16:42 +0100)]
drm/i915: no lvds quirk for AOpen MP45

commit e57b6886f555ab57f40a01713304e2053efe51ec upstream.

According to a bug report, it doesn't have one.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoperf tools: Fix perf stack to non executable on x86_64
Jiri Olsa [Mon, 6 Feb 2012 20:54:06 +0000 (18:54 -0200)]
perf tools: Fix perf stack to non executable on x86_64

commit 7a0153ee15575a4d07b5da8c96b79e0b0fd41a12 upstream.

By adding following objects:
  bench/mem-memcpy-x86-64-asm.o
the x86_64 perf binary ended up with executable stack.

The reason was that above object are assembler sourced and is missing the
GNU-stack note section. In such case the linker assumes that the final binary
should not be restricted at all and mark the stack as RWX.

Adding section ".note.GNU-stack" definition to mentioned object, with all
flags disabled, thus omiting this object from linker stack flags decision.

Problem introduced in:

  $ git describe ea7872b
  v2.6.37-rc2-19-gea7872b

Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=783570
Reported-by: Clark Williams <williams@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328100848-5630-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ committer note: Backported fix to perf/urgent (3.3-rc2+) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoperf evsel: Fix an issue where perf report fails to show the proper percentage
Naveen N. Rao [Fri, 3 Feb 2012 17:01:13 +0000 (22:31 +0530)]
perf evsel: Fix an issue where perf report fails to show the proper percentage

commit a4a03fc7ef89020baca4f19174e6a43767c6d78a upstream.

This patch fixes an issue where perf report shows nan% for certain
perf.data files. The below is from a report for a do_fork probe:

   -nan%           sshd  [kernel.kallsyms]  [k] do_fork
   -nan%    packagekitd  [kernel.kallsyms]  [k] do_fork
   -nan%    dbus-daemon  [kernel.kallsyms]  [k] do_fork
   -nan%           bash  [kernel.kallsyms]  [k] do_fork

A git bisect shows commit f3bda2c as the cause. However, looking back
through the git history, I saw commit 640c03c which seems to have
removed the required initialization for perf_sample->period. The problem
only started showing after commit f3bda2c. The below patch re-introduces
the initialization and it fixes the problem for me.

With the below patch, for the same perf.data:

  73.08%             bash  [kernel.kallsyms]  [k] do_fork
   8.97%      11-dhclient  [kernel.kallsyms]  [k] do_fork
   6.41%             sshd  [kernel.kallsyms]  [k] do_fork
   3.85%        20-chrony  [kernel.kallsyms]  [k] do_fork
   2.56%         sendmail  [kernel.kallsyms]  [k] do_fork

This patch applies over current linux-tip commit 9949284.

Problem introduced in:

$ git describe 640c03c
v2.6.37-rc3-83-g640c03c

Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoLinux 3.0.21
Greg Kroah-Hartman [Mon, 13 Feb 2012 19:15:52 +0000 (11:15 -0800)]
Linux 3.0.21

12 years agonet: fix NULL dereferences in check_peer_redir()
Eric Dumazet [Thu, 9 Feb 2012 21:13:19 +0000 (16:13 -0500)]
net: fix NULL dereferences in check_peer_redir()

[ Upstream commit d3aaeb38c40e5a6c08dd31a1b64da65c4352be36, along
  with dependent backports of commits:
     69cce1d1404968f78b177a0314f5822d5afdbbfb
     9de79c127cccecb11ae6a21ab1499e87aa222880
     218fa90f072e4aeff9003d57e390857f4f35513e
     580da35a31f91a594f3090b7a2c39b85cb051a12
     f7e57044eeb1841847c24aa06766c8290c202583
     e049f28883126c689cf95859480d9ee4ab23b7fa ]

Gergely Kalman reported crashes in check_peer_redir().

It appears commit f39925dbde778 (ipv4: Cache learned redirect
information in inetpeer.) added a race, leading to possible NULL ptr
dereference.

Since we can now change dst neighbour, we should make sure a reader can
safely use a neighbour.

Add RCU protection to dst neighbour, and make sure check_peer_redir()
can be called safely by different cpus in parallel.

As neighbours are already freed after one RCU grace period, this patch
should not add typical RCU penalty (cache cold effects)

Many thanks to Gergely for providing a pretty report pointing to the
bug.

Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopowernow-k8: Fix indexing issue
Andreas Herrmann [Fri, 6 Jan 2012 14:57:55 +0000 (15:57 +0100)]
powernow-k8: Fix indexing issue

commit a8eb28480e9b637cc78b9aa5e08612ba97e1317a upstream.

The driver uses the pstate number from the status register as index in
its table of ACPI pstates (powernow_table). This is wrong as this is
not a 1-to-1 mapping.

For example we can have _PSS information to just utilize Pstate 0 and
Pstate 4, ie.

  powernow-k8: Core Performance Boosting: on.
  powernow-k8:    0 : pstate 0 (2200 MHz)
  powernow-k8:    1 : pstate 4 (1400 MHz)

In this example the driver's powernow_table has just 2 entries. Using
the pstate number (4) as index into this table is just plain wrong.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopowernow-k8: Avoid Pstate MSR accesses on systems supporting CPB
Andreas Herrmann [Fri, 6 Jan 2012 14:56:31 +0000 (15:56 +0100)]
powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB

commit 201bf0f129e1715a33568d1563d9a75b840ab4d3 upstream.

Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of
the paranoia check. (assuming that the ACPI Pstate information is
correct.)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agommc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip
Axel Lin [Wed, 1 Feb 2012 04:31:47 +0000 (12:31 +0800)]
mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip

commit b5266ea675c5a041e2852c7ccec4cf2d4f5e0cf4 upstream.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: add new zte 3g-dongle's pid to option.c
Rui li [Tue, 31 Jan 2012 07:27:33 +0000 (15:27 +0800)]
USB: add new zte 3g-dongle's pid to option.c

commit 1608ea5f4b5d6262cd6e808839491cfb2a67405a upstream.

As ZTE have and will use more pid for new products this year,
so we need to add some new zte 3g-dongle's pid on option.c ,
and delete one pid 0x0154 because it use for mass-storage port.

Signed-off-by: Rui li <li.rui27@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: usbserial: add new PID number (0xa951) to the ftdi driver
Milan Kocian [Fri, 3 Feb 2012 13:28:00 +0000 (14:28 +0100)]
USB: usbserial: add new PID number (0xa951) to the ftdi driver

commit 90451e6973a5da155c6f315a409ca0a8d3ce6b76 upstream.

Signed-off-by: Milan Kocian <milon@wq.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agousb: Skip PCI USB quirk handling for Netlogic XLP
Jayachandran C [Fri, 27 Jan 2012 14:57:32 +0000 (20:27 +0530)]
usb: Skip PCI USB quirk handling for Netlogic XLP

commit e4436a7c17ac2b5e138f93f83a541cba9b311685 upstream.

The Netlogic XLP SoC's on-chip USB controller appears as a PCI
USB device, but does not need the EHCI/OHCI handoff done in
usb/host/pci-quirks.c.

The pci-quirks.c is enabled for all vendors and devices, and is
enabled if USB and PCI are configured.

If we do not skip the qurik handling on XLP, the readb() call in
ehci_bios_handoff() will cause a crash since byte access is not
supported for EHCI registers in XLP.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agousb: gadget: zero: fix bug in loopback autoresume handling
Timo Juhani Lindfors [Sun, 29 Jan 2012 14:12:13 +0000 (16:12 +0200)]
usb: gadget: zero: fix bug in loopback autoresume handling

commit 683da59d7b8ae04891636d4b59893cd4e9b0b7e5 upstream.

ab943a2e125b (USB: gadget: gadget zero uses new suspend/resume hooks)
introduced a copy-paste error where f_loopback.c writes to a variable
declared in f_sourcesink.c. This prevents one from creating gadgets
that only have a loopback function.

Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: r8712u: Add new Sitecom UsB ID
Larry Finger [Sat, 7 Jan 2012 16:07:03 +0000 (10:07 -0600)]
staging: r8712u: Add new Sitecom UsB ID

commit 1793bf1deddc8ce25dc41925d5dbe64536c841b6 upstream.

Add USB ID for SITECOM WLA-1000 V1 001 WLAN

Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Reported-and-tested-by: Dario Lucia <dario.lucia@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: asus_oled: fix NULL-ptr crash on unloading
Pekka Paalanen [Sun, 22 Jan 2012 14:33:47 +0000 (16:33 +0200)]
Staging: asus_oled: fix NULL-ptr crash on unloading

commit 3589e74595a4332ebf77b5ed006f3c6686071ecd upstream.

Asus_oled triggers the following bug on module unloading:

 usbcore: deregistering interface driver asus-oled
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: [<ffffffff8111292b>] sysfs_delete_link+0x30/0x66

 Call Trace:
  [<ffffffff81225373>] device_remove_class_symlinks+0x6b/0x70
  [<ffffffff812256a8>] device_del+0x9f/0x1ab
  [<ffffffff812257c5>] device_unregister+0x11/0x1e
  [<ffffffffa000cb82>] asus_oled_disconnect+0x4f/0x9e [asus_oled]
  [<ffffffff81277430>] usb_unbind_interface+0x54/0x103
  [<ffffffff812276c4>] __device_release_driver+0xa2/0xeb
  [<ffffffff81227794>] driver_detach+0x87/0xad
  [<ffffffff812269e9>] bus_remove_driver+0x91/0xc1
  [<ffffffff81227fb4>] driver_unregister+0x66/0x6e
  [<ffffffff812771ed>] usb_deregister+0xbb/0xc4
  [<ffffffffa000ce87>] asus_oled_exit+0x2f/0x31 [asus_oled]
  [<ffffffff81068365>] sys_delete_module+0x1b8/0x21b
  [<ffffffff810ae3de>] ? do_munmap+0x2ef/0x313
  [<ffffffff813699bb>] system_call_fastpath+0x16/0x1b

This is due to an incorrect destruction sequence in asus_oled_exit().

Fix the order, fixes the bug. Tested on an Asus G50V laptop only.

Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: asus_oled: fix image processing
Pekka Paalanen [Sun, 22 Jan 2012 14:33:46 +0000 (16:33 +0200)]
Staging: asus_oled: fix image processing

commit 635032cb397b396241372fa0ff36ae758e658b23 upstream.

Programming an image was broken, because odev->buf_offs was not advanced
for val == 0 in append_values(). This regression was introduced in:

 commit 1ff12a4aa354bed093a0240d5e6347b1e27601bc
 Author: Kevin A. Granade <kevin.granade@gmail.com>
 Date:   Sat Sep 5 01:03:39 2009 -0500

     Staging: asus_oled: Cleaned up checkpatch issues.

Fix the image processing by special-casing val == 0.

I have tested this change on an Asus G50V laptop only.

Cc: Jakub Schmidtke <sjakub@gmail.com>
Cc: Kevin A. Granade <kevin.granade@gmail.com>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotarget: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}
Roland Dreier [Tue, 10 Jan 2012 01:54:00 +0000 (17:54 -0800)]
target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}

commit 9fbc8909876a2160044e71d376848973b9bfdc3f upstream.

According to SPC-4, the sense key for commands that are failed with
INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be
ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh).  Without this
patch, a tcm_loop LUN incorrectly gives:

    # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0
    Sense Information:
     Fixed format, current;  Sense key: Aborted Command
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 0b 00 00 00 00 0a  00 00 00 00 24 00 00 00
            00 00

While a real SCSI disk gives:

    Sense Information:
     Fixed format, current;  Sense key: Illegal Request
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 05 00 00 00 00 18  00 00 00 00 24 00 00 00
            00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00

with the main point being that the real disk gives a sense key of
ILLEGAL REQUEST (5h).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotarget: Allow PERSISTENT RESERVE IN for non-reservation holder
Marco Sanvido [Wed, 4 Jan 2012 01:12:58 +0000 (17:12 -0800)]
target: Allow PERSISTENT RESERVE IN for non-reservation holder

commit 6816966a8418b980481b4dced7eddd1796b145e8 upstream.

Initiators that aren't the active reservation holder should be able to
do a PERSISTENT RESERVE IN command in all cases, so add it to the list
of allowed CDBs in core_scsi3_pr_seq_non_holder().

Signed-off-by: Marco Sanvido <marco@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotarget: Use correct preempted registration sense code
Marco Sanvido [Wed, 4 Jan 2012 01:12:57 +0000 (17:12 -0800)]
target: Use correct preempted registration sense code

commit 9e08e34e3735ae057eb3834da3570995811b7eb9 upstream.

The comments quote the right parts of the spec:

   * d) Establish a unit attention condition for the
   *    initiator port associated with every I_T nexus
   *    that lost its registration other than the I_T
   *    nexus on which the PERSISTENT RESERVE OUT command
   *    was received, with the additional sense code set
   *    to REGISTRATIONS PREEMPTED.

and

   * e) Establish a unit attention condition for the initiator
   *    port associated with every I_T nexus that lost its
   *    persistent reservation and/or registration, with the
   *    additional sense code set to REGISTRATIONS PREEMPTED;

but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED
instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED.  Fix this.

Signed-off-by: Marco Sanvido <marco@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomm: fix UP THP spin_is_locked BUGs
Hugh Dickins [Thu, 9 Feb 2012 01:13:40 +0000 (17:13 -0800)]
mm: fix UP THP spin_is_locked BUGs

commit b9980cdcf2524c5fe15d8cbae9c97b3ed6385563 upstream.

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomm: compaction: check for overlapping nodes during isolation for migration
Mel Gorman [Thu, 9 Feb 2012 01:13:38 +0000 (17:13 -0800)]
mm: compaction: check for overlapping nodes during isolation for migration

commit dc9086004b3d5db75997a645b3fe08d9138b7ad0 upstream.

When isolating pages for migration, migration starts at the start of a
zone while the free scanner starts at the end of the zone.  Migration
avoids entering a new zone by never going beyond the free scanned.

Unfortunately, in very rare cases nodes can overlap.  When this happens,
migration isolates pages without the LRU lock held, corrupting lists
which will trigger errors in reclaim or during page free such as in the
following oops

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
  PGD 1dda554067 PUD 1e1cb58067 PMD 0
  Oops: 0000 [#1] SMP
  CPU 37
  Pid: 17088, comm: memcg_process_s Tainted: G            X
  RIP: free_pcppages_bulk+0xcc/0x450
  Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
  Call Trace:
    free_hot_cold_page+0x17e/0x1f0
    __pagevec_free+0x90/0xb0
    release_pages+0x22a/0x260
    pagevec_lru_move_fn+0xf3/0x110
    putback_lru_page+0x66/0xe0
    unmap_and_move+0x156/0x180
    migrate_pages+0x9e/0x1b0
    compact_zone+0x1f3/0x2f0
    compact_zone_order+0xa2/0xe0
    try_to_compact_pages+0xdf/0x110
    __alloc_pages_direct_compact+0xee/0x1c0
    __alloc_pages_slowpath+0x370/0x830
    __alloc_pages_nodemask+0x1b1/0x1c0
    alloc_pages_vma+0x9b/0x160
    do_huge_pmd_anonymous_page+0x160/0x270
    do_page_fault+0x207/0x4c0
    page_fault+0x25/0x30

The "X" in the taint flag means that external modules were loaded but but
is unrelated to the bug triggering.  The real problem was because the PFN
layout looks like this

  Zone PFN ranges:
    DMA      0x00000010 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
    Normal   0x00100000 -> 0x01e80000
  Movable zone start PFN for each node
  early_node_map[14] active PFN ranges
      0: 0x00000010 -> 0x0000009b
      0: 0x00000100 -> 0x0007a1ec
      0: 0x0007a354 -> 0x0007a379
      0: 0x0007f7ff -> 0x0007f800
      0: 0x00100000 -> 0x00680000
      1: 0x00680000 -> 0x00e80000
      0: 0x00e80000 -> 0x01080000
      1: 0x01080000 -> 0x01280000
      0: 0x01280000 -> 0x01480000
      1: 0x01480000 -> 0x01680000
      0: 0x01680000 -> 0x01880000
      1: 0x01880000 -> 0x01a80000
      0: 0x01a80000 -> 0x01c80000
      1: 0x01c80000 -> 0x01e80000

The fix is straight-forward.  isolate_migratepages() has to make a
similar check to isolate_freepage to ensure that it never isolates pages
from a zone it does not hold the LRU lock for.

This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
and current mainline.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopcmcia: fix socket refcount decrementing on each resume
Russell King [Thu, 9 Feb 2012 01:13:41 +0000 (17:13 -0800)]
pcmcia: fix socket refcount decrementing on each resume

commit 025e4ab3db07fcbf62c01e4f30d1012234beb980 upstream.

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: wm8962: Fix word length configuration
Susan Gao [Mon, 30 Jan 2012 21:57:04 +0000 (13:57 -0800)]
ASoC: wm8962: Fix word length configuration

commit 2b6712b19531e22455e7fa18371c5ba9eec76699 upstream.

Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: wm_hubs: Correct line input to line output 2 paths
Mark Brown [Wed, 1 Feb 2012 23:46:58 +0000 (23:46 +0000)]
ASoC: wm_hubs: Correct line input to line output 2 paths

commit 43b6cec27e1e50a1de3eff47e66e502f3fe7e66e upstream.

The second line output mixer has the controls for the line input bypasses
in the opposite order.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: wm_hubs: Fix routing of input PGAs to line output mixer
Mark Brown [Tue, 31 Jan 2012 11:55:32 +0000 (11:55 +0000)]
ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

commit ee76744c51ec342df9822b4a85dbbfc3887b6d60 upstream.

IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1
and IN2 to LINEOUT2.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohwmon: (w83627ehf) Fix number of fans for NCT6776F
Guenter Roeck [Fri, 27 Jan 2012 13:43:59 +0000 (05:43 -0800)]
hwmon: (w83627ehf) Fix number of fans for NCT6776F

commit 585c0fd8216e0c9f98e2434092af7ec0f999522d upstream.

NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of
chip register bits. Check that second set of bits in addition to the first set
to detect if fans 3..5 are monitored.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agolockdep, bug: Exclude TAINT_FIRMWARE_WORKAROUND from disabling lockdep
Peter Zijlstra [Mon, 14 Nov 2011 12:13:49 +0000 (13:13 +0100)]
lockdep, bug: Exclude TAINT_FIRMWARE_WORKAROUND from disabling lockdep

commit df754e6af2f237a6c020c0daff55a1a609338e31 upstream.

It's unlikely that TAINT_FIRMWARE_WORKAROUND causes false
lockdep messages, so do not disable lockdep in that case.
We still want to keep lockdep disabled in the
TAINT_OOT_MODULE case:

  - bin-only modules can cause various instabilities in
    their and in unrelated kernel code

  - they are impossible to debug for kernel developers

  - they also typically do not have the copyright license
    permission to link to the GPL-ed lockdep code.

Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xopopjjens57r0i13qnyh2yo@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoatmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
Hubert Feurstein [Mon, 9 Jan 2012 16:23:57 +0000 (17:23 +0100)]
atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume

commit 9f1065032ceb7e86c7c9f16bb86518857e88a172 upstream.

An error was existing in the saving of CONTRAST_CTR register
across suspend/resume.

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agocifs: Fix oops in session setup code for null user mounts
Shirish Pargaonkar [Thu, 2 Feb 2012 21:28:28 +0000 (15:28 -0600)]
cifs: Fix oops in session setup code for null user mounts

commit de47a4176c532ef5961b8a46a2d541a3517412d3 upstream.

For null user mounts, do not invoke string length function
during session setup.

Reported-and-Tested-by: Chris Clayton <chris2553@googlemail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoeCryptfs: Infinite loop due to overflow in ecryptfs_write()
Li Wang [Thu, 19 Jan 2012 01:44:36 +0000 (09:44 +0800)]
eCryptfs: Infinite loop due to overflow in ecryptfs_write()

commit 684a3ff7e69acc7c678d1a1394fe9e757993fd34 upstream.

ecryptfs_write() can enter an infinite loop when truncating a file to a
size larger than 4G. This only happens on architectures where size_t is
represented by 32 bits.

This was caused by a size_t overflow due to it incorrectly being used to
store the result of a calculation which uses potentially large values of
type loff_t.

[tyhicks@canonical.com: rewrite subject and commit message]
Signed-off-by: Li Wang <liwang@nudt.edu.cn>
Signed-off-by: Yunchuan Wen <wenyunchuan@kylinos.com.cn>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: handle 3rd pipe
Eugeni Dodonov [Sun, 8 Jan 2012 01:40:35 +0000 (23:40 -0200)]
drm/i915: handle 3rd pipe

commit 07c1e8c1462fa7324de4c36ae9e55da2abd79cee upstream.

We don't need to check 3rd pipe specifically, as it shares PLL with some
other one.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41977
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: Fix TV Out refresh rate.
Rodrigo Vivi [Wed, 14 Dec 2011 23:10:06 +0000 (21:10 -0200)]
drm/i915: Fix TV Out refresh rate.

commit 23bd15ec662344dc10e9918fdd0dbc58bc71526d upstream.

TV Out refresh rate was half of the specification for almost all modes.
Due to this reason pixel clock was so low for some modes causing flickering screen.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: check ACTHD of all rings
Daniel Vetter [Sun, 27 Nov 2011 17:58:17 +0000 (18:58 +0100)]
drm/i915: check ACTHD of all rings

commit 097354eb14fa94d31a09c64d640643f58e4a5a9a upstream.

Otherwise hangcheck spuriously fires when running blitter/bsd-only
workloads.

Contrary to a similar patch by Ben Widawsky this does not check
INSTDONE of the other rings. Chris Wilson implied that in a failure to
detect a hang, most likely because INSTDONE was fluctuating. Thus only
check ACTHD, which as far as I know is rather reliable. Also, blitter
and bsd rings can't launch complex tasks from a single instruction
(like 3D_PRIM on the render with complex or even infinite shaders).

This fixes spurious gpu hang detection when running
tests/gem_hangcheck_forcewake on snb/ivb.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: DisplayPort hot remove notification to audio driver
Wu Fengguang [Fri, 9 Dec 2011 12:42:21 +0000 (20:42 +0800)]
drm/i915: DisplayPort hot remove notification to audio driver

commit 832afda6a7d7235ef0e09f4ec46736861540da6d upstream.

On DP monitor hot remove, clear DP_AUDIO_OUTPUT_ENABLE accordingly,
so that the audio driver will receive hot plug events and take action
to refresh its device state and ELD contents.

Note that the DP_AUDIO_OUTPUT_ENABLE bit may be enabled or disabled
only when the link training is complete and set to "Normal".

Tested OK for both hot plug/remove and DPMS on/off.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/i915: HDMI hot remove notification to audio driver
Wu Fengguang [Fri, 9 Dec 2011 12:42:20 +0000 (20:42 +0800)]
drm/i915: HDMI hot remove notification to audio driver

commit 2deed761188d7480eb5f7efbfe7aa77f09322ed8 upstream.

On HDMI monitor hot remove, clear SDVO_AUDIO_ENABLE accordingly, so that
the audio driver will receive hot plug events and take action to refresh
its device state and ELD contents.

The cleared SDVO_AUDIO_ENABLE bit needs to be restored to prevent losing
HDMI audio after DPMS on.

CC: Wang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoudf: Mark LVID buffer as uptodate before marking it dirty
Jan Kara [Fri, 23 Dec 2011 10:53:07 +0000 (11:53 +0100)]
udf: Mark LVID buffer as uptodate before marking it dirty

commit 853a0c25baf96b028de1654bea1e0c8857eadf3d upstream.

When we hit EIO while writing LVID, the buffer uptodate bit is cleared.
This then results in an anoying warning from mark_buffer_dirty() when we
write the buffer again. So just set uptodate flag unconditionally.

Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: Ensure we generate a driver name
Mark Brown [Tue, 20 Sep 2011 10:41:54 +0000 (11:41 +0100)]
ASoC: Ensure we generate a driver name

commit f0e8ed858edb327802ee65fd695cc1538286226f upstream.

Commit 873bd4c (ASoC: Don't set invalid name string to snd_card->driver
field) broke generation of a driver name for all ASoC cards relying on the
automatic generation of one. Fix this by using the old default with spaces
replaced by underscores.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agosched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
Chanho Min [Thu, 5 Jan 2012 11:00:19 +0000 (20:00 +0900)]
sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW

commit cb297a3e433dbdcf7ad81e0564e7b804c941ff0d upstream.

This issue happens under the following conditions:

 1. preemption is off
 2. __ARCH_WANT_INTERRUPTS_ON_CTXSW is defined
 3. RT scheduling class
 4. SMP system

Sequence is as follows:

 1.suppose current task is A. start schedule()
 2.task A is enqueued pushable task at the entry of schedule()
   __schedule
    prev = rq->curr;
    ...
    put_prev_task
     put_prev_task_rt
      enqueue_pushable_task
 4.pick the task B as next task.
   next = pick_next_task(rq);
 3.rq->curr set to task B and context_switch is started.
   rq->curr = next;
 4.At the entry of context_swtich, release this cpu's rq->lock.
   context_switch
    prepare_task_switch
     prepare_lock_switch
      raw_spin_unlock_irq(&rq->lock);
 5.Shortly after rq->lock is released, interrupt is occurred and start IRQ context
 6.try_to_wake_up() which called by ISR acquires rq->lock
    try_to_wake_up
     ttwu_remote
      rq = __task_rq_lock(p)
      ttwu_do_wakeup(rq, p, wake_flags);
        task_woken_rt
 7.push_rt_task picks the task A which is enqueued before.
   task_woken_rt
    push_rt_tasks(rq)
     next_task = pick_next_pushable_task(rq)
 8.At find_lock_lowest_rq(), If double_lock_balance() returns 0,
   lowest_rq can be the remote rq.
  (But,If preemption is on, double_lock_balance always return 1 and it
   does't happen.)
   push_rt_task
    find_lock_lowest_rq
     if (double_lock_balance(rq, lowest_rq))..
 9.find_lock_lowest_rq return the available rq. task A is migrated to
   the remote cpu/rq.
   push_rt_task
    ...
    deactivate_task(rq, next_task, 0);
    set_task_cpu(next_task, lowest_rq->cpu);
    activate_task(lowest_rq, next_task, 0);
 10. But, task A is on irq context at this cpu.
     So, task A is scheduled by two cpus at the same time until restore from IRQ.
     Task A's stack is corrupted.

To fix it, don't migrate an RT task if it's still running.

Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/CAOAMb1BHA=5fm7KTewYyke6u-8DP0iUuJMpgQw54vNeXFsGpoQ@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/radeon/kms: disable output polling when suspended
Seth Forshee [Wed, 1 Feb 2012 01:06:25 +0000 (19:06 -0600)]
drm/radeon/kms: disable output polling when suspended

commit 86698c20f71d488b32c49ed4687fb3cf8a88a5ca upstream.

Polling the outputs when the device is suspended can result in erroneous
status updates. Disable output polling during suspend to prevent this
from happening.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/nouveau/gem: fix fence_sync race / oops
Ben Skeggs [Tue, 10 Jan 2012 00:18:28 +0000 (10:18 +1000)]
drm/nouveau/gem: fix fence_sync race / oops

commit 525895ba388c949aa906f26e3ec5cb1ab041f56b upstream.

Due to a race it was possible for a fence to be destroyed while another
thread was trying to synchronise with it.  If this happened in the fallback
non-semaphore path, it lead to the following oops due to fence->channel
being NULL.

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau]
*pde = a649c067
SMP
Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi]

Pid: 2255, comm: gnome-shell Tainted: G           O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM
EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1
EIP is at nouveau_fence_update+0xe/0xe0 [nouveau]
EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000
ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000)
Stack:
 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f
 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0
 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000
Call Trace:
 [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau]
 [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau]
 [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau]
 [<fa964046>] validate_list+0x176/0x300 [nouveau]
 [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm]
 [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau]
 [<c0406481>] ? die+0x31/0x80
 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm]
 [<c0406481>] ? die+0x31/0x80
 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau]
 [<c0635c7b>] ? file_has_perm+0xcb/0xe0
 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm]
 [<c0564f56>] do_vfs_ioctl+0x86/0x5b0
 [<c0406481>] ? die+0x31/0x80
 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130
 [<c0554f30>] ? fget_light+0x30/0x340
 [<c05654ef>] sys_ioctl+0x6f/0x80
 [<c099e3a4>] syscall_call+0x7/0xb
 [<c0406481>] ? die+0x31/0x80
 [<c0406481>] ? die+0x31/0x80

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.
Michel Dänzer [Wed, 1 Feb 2012 11:09:55 +0000 (12:09 +0100)]
drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.

commit 1b61925061660009f5b8047f93c5297e04541273 upstream.

The value of this register is transferred to the V_COUNTER register at the
beginning of vertical blank. V_COUNTER is the reference for VLINE waits and
goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout,
so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the
beginning of vertical blank, and VLINE waits excluding the whole scanout area
could never finish (possibly only if VIEWPORT_Y_START is larger than the length
of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer
height should prevent this for any kind of VLINE wait.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 .

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during...
Mel Gorman [Fri, 3 Feb 2012 23:37:18 +0000 (15:37 -0800)]
mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration

commit 0bf380bc70ecba68cb4d74dc656cc2fa8c4d801a upstream.

When isolating for migration, migration starts at the start of a zone
which is not necessarily pageblock aligned.  Further, it stops isolating
when COMPACT_CLUSTER_MAX pages are isolated so migrate_pfn is generally
not aligned.  This allows isolate_migratepages() to call pfn_to_page() on
an invalid PFN which can result in a crash.  This was originally reported
against a 3.0-based kernel with the following trace in a crash dump.

PID: 9902   TASK: d47aecd0  CPU: 0   COMMAND: "memcg_process_s"
 #0 [d72d3ad0] crash_kexec at c028cfdb
 #1 [d72d3b24] oops_end at c05c5322
 #2 [d72d3b38] __bad_area_nosemaphore at c0227e60
 #3 [d72d3bec] bad_area at c0227fb6
 #4 [d72d3c00] do_page_fault at c05c72ec
 #5 [d72d3c80] error_code (via page_fault) at c05c47a4
    EAX: 00000000  EBX: 000c0000  ECX: 00000001  EDX: 00000807  EBP: 000c0000
    DS:  007b      ESI: 00000001  ES:  007b      EDI: f3000a80  GS:  6f50
    CS:  0060      EIP: c030b15a  ERR: ffffffff  EFLAGS: 00010002
 #6 [d72d3cb4] isolate_migratepages at c030b15a
 #7 [d72d3d14] zone_watermark_ok at c02d26cb
 #8 [d72d3d2c] compact_zone at c030b8de
 #9 [d72d3d68] compact_zone_order at c030bba1
#10 [d72d3db4] try_to_compact_pages at c030bc84
#11 [d72d3ddc] __alloc_pages_direct_compact at c02d61e7
#12 [d72d3e08] __alloc_pages_slowpath at c02d66c7
#13 [d72d3e78] __alloc_pages_nodemask at c02d6a97
#14 [d72d3eb8] alloc_pages_vma at c030a845
#15 [d72d3ed4] do_huge_pmd_anonymous_page at c03178eb
#16 [d72d3f00] handle_mm_fault at c02f36c6
#17 [d72d3f30] do_page_fault at c05c70ed
#18 [d72d3fb0] error_code (via page_fault) at c05c47a4
    EAX: b71ff000  EBX: 00000001  ECX: 00001600  EDX: 00000431
    DS:  007b      ESI: 08048950  ES:  007b      EDI: bfaa3788
    SS:  007b      ESP: bfaa36e0  EBP: bfaa3828  GS:  6f50
    CS:  0073      EIP: 080487c8  ERR: ffffffff  EFLAGS: 00010202

It was also reported by Herbert van den Bergh against 3.1-based kernel
with the following snippet from the console log.

BUG: unable to handle kernel paging request at 01c00008
IP: [<c0522399>] isolate_migratepages+0x119/0x390
*pdpt = 000000002f7ce001 *pde = 0000000000000000

It is expected that it also affects 3.2.x and current mainline.

The problem is that pfn_valid is only called on the first PFN being
checked and that PFN is not necessarily aligned.  Lets say we have a case
like this

H = MAX_ORDER_NR_PAGES boundary
| = pageblock boundary
m = cc->migrate_pfn
f = cc->free_pfn
o = memory hole

H------|------H------|----m-Hoooooo|ooooooH-f----|------H

The migrate_pfn is just below a memory hole and the free scanner is beyond
the hole.  When isolate_migratepages started, it scans from migrate_pfn to
migrate_pfn+pageblock_nr_pages which is now in a memory hole.  It checks
pfn_valid() on the first PFN but then scans into the hole where there are
not necessarily valid struct pages.

This patch ensures that isolate_migratepages calls pfn_valid when
necessary.

Reported-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Tested-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomm/filemap_xip.c: fix race condition in xip_file_fault()
Carsten Otte [Fri, 3 Feb 2012 23:37:14 +0000 (15:37 -0800)]
mm/filemap_xip.c: fix race condition in xip_file_fault()

commit 99f02ef1f18631eb0a4e0ea0a3d56878dbcb4b90 upstream.

Fix a race condition that shows in conjunction with xip_file_fault() when
two threads of the same user process fault on the same memory page.

In this case, the race winner will install the page table entry and the
unlucky loser will cause an oops: xip_file_fault calls vm_insert_pfn (via
vm_insert_mixed) which drops out at this check:

retval = -EBUSY;
if (!pte_none(*pte))
goto out_unlock;

The resulting -EBUSY return value will trigger a BUG_ON() in
xip_file_fault.

This fix simply considers the fault as fixed in this case, because the
race winner has successfully installed the pte.

[akpm@linux-foundation.org: use conventional (and consistent) comment layout]
Reported-by: David Sadler <dsadler@us.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reported-by: Louis Alex Eisner <leisner@cs.ucsd.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoat_hdmac: bugfix for enabling channel irq
Nikolaus Voss [Tue, 17 Jan 2012 09:28:33 +0000 (10:28 +0100)]
at_hdmac: bugfix for enabling channel irq

commit bda3a47c886664e86ee14eb79e9072b9e341f575 upstream.

commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant
chan_id and chancnt initialization in dma drivers as this is done
in dma_async_device_register().

However, atc_enable_irq() relied on chan_id set before registering
the device, what left only channel 0 functional for this driver.

This patch introduces atc_enable/disable_chan_irq() as a variant
of atc_enable/disable_irq() with the channel as explicit argument.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agokprobes: fix a memory leak in function pre_handler_kretprobe()
Jiang Liu [Fri, 3 Feb 2012 23:37:16 +0000 (15:37 -0800)]
kprobes: fix a memory leak in function pre_handler_kretprobe()

commit 55ca6140e9bb307efc97a9301a4f501de02a6fd6 upstream.

In function pre_handler_kretprobe(), the allocated kretprobe_instance
object will get leaked if the entry_handler callback returns non-zero.
This may cause all the preallocated kretprobe_instance objects exhausted.

This issue can be reproduced by changing
samples/kprobes/kretprobe_example.c to probe "mutex_unlock".  And the fix
is straightforward: just put the allocated kretprobe_instance object back
onto the free_instances list.

[akpm@linux-foundation.org: use raw_spin_lock/unlock]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoIB/mlx4: pass SMP vendor-specific attribute MADs to firmware
Jack Morgenstein [Thu, 26 Jan 2012 14:41:33 +0000 (16:41 +0200)]
IB/mlx4: pass SMP vendor-specific attribute MADs to firmware

commit a6f7feae6d19e84253918d88b04153af09d3a243 upstream.

In the current code, vendor-specific MADs (e.g with the FDR-10
attribute) are silently dropped by the driver, resulting in timeouts
at the sending side and inability to query/configure the relevant
feature.  However, the ConnectX firmware is able to handle such MADs.
For unsupported attributes, the firmware returns a GET_RESPONSE MAD
containing an error status.

For example, for a FDR-10 node with LID 11:

    # ibstat mlx4_0 1

    CA: 'mlx4_0'
    Port 1:
    State: Active
    Physical state: LinkUp
    Rate: 40 (FDR10)
    Base lid: 11
    LMC: 0
    SM lid: 24
    Capability mask: 0x02514868
    Port GUID: 0x0002c903002e65d1
    Link layer: InfiniBand

Extended Port Query (EPI) vendor mad timeouts before the patch:

    # smpquery MEPI 11 -d

    ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms
    ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11)
    smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed

EPI query works OK with the patch:

    # smpquery MEPI 11 -d

    ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [6548] mad_rpc: data offs 64 sz 64
    mad data
    0000 0000 0000 0001 0000 0001 0000 0001
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    # Ext Port info: Lid 11 port 0
    StateChangeEnable:...............0x00
    LinkSpeedSupported:..............0x01
    LinkSpeedEnabled:................0x01
    LinkSpeedActive:.................0x01

Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Ira Weiny <weiny2@llnl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agofirewire: ohci: disable MSI on Ricoh controllers
Stefan Richter [Sun, 29 Jan 2012 11:41:15 +0000 (12:41 +0100)]
firewire: ohci: disable MSI on Ricoh controllers

commit 320cfa6ce0b3dc794fedfa4bae54c0f65077234d upstream.

The PCIe device

    FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller
    [1180:e832] (prog-if 10 [OHCI])

is unable to access attached FireWire devices when MSI is enabled but
works if MSI is disabled.
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html

Hence add the "disable MSI" quirks flag for this device, or in fact for
safety and simplicity for all current (R5U230, R5U231, R5U240) and
future Ricoh PCIe 1394 controllers.

Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agofirewire: ohci: add reset packet quirk for SB Audigy
Clemens Ladisch [Thu, 26 Jan 2012 21:05:58 +0000 (22:05 +0100)]
firewire: ohci: add reset packet quirk for SB Audigy

commit d1bb399ad03c11e792f6dea198d3b1e23061f094 upstream.

The Audigy's SB1394 controller is actually from Texas Instruments
and has the same bus reset packet generation bug, so it needs the
same quirk entry.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoproc: make sure mem_open() doesn't pin the target's memory
Oleg Nesterov [Tue, 31 Jan 2012 16:15:11 +0000 (17:15 +0100)]
proc: make sure mem_open() doesn't pin the target's memory

commit 6d08f2c7139790c268820a2e590795cb8333181a upstream.

Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.

Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.

I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.

Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoproc: unify mem_read() and mem_write()
Oleg Nesterov [Tue, 31 Jan 2012 16:14:54 +0000 (17:14 +0100)]
proc: unify mem_read() and mem_write()

commit 572d34b946bae070debd42db1143034d9687e13f upstream.

No functional changes, cleanup and preparation.

mem_read() and mem_write() are very similar. Move this code into the
new common helper, mem_rw(), which takes the additional "int write"
argument.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoproc: mem_release() should check mm != NULL
Oleg Nesterov [Tue, 31 Jan 2012 16:14:38 +0000 (17:14 +0100)]
proc: mem_release() should check mm != NULL

commit 71879d3cb3dd8f2dfdefb252775c1b3ea04a3dd4 upstream.

mem_release() can hit mm == NULL, add the necessary check.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
Samuel Thibault [Fri, 3 Feb 2012 23:37:15 +0000 (15:37 -0800)]
drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer

commit cbcb8346054073d000ecac324763372d6abd44ac upstream.

KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland
with a 64bit kernel if the font width is not 8.

This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes
con_font_get return EIO in such case.

This flag should *not* be set for KDFONTOP, since it's actually the whole
point of this flag (see comment in con_font_set for instance).

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arthur Taylor <art@ified.ca>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: OMAP2+: GPMC: fix device size setup
Yegor Yefremov [Mon, 23 Jan 2012 07:32:23 +0000 (08:32 +0100)]
ARM: OMAP2+: GPMC: fix device size setup

commit 8ef5d844cc3a644ea6f7665932a4307e9fad01fa upstream.

following statement can only change device size from 8-bit(0) to 16-bit(1),
but not vice versa:

regval |= GPMC_CONFIG1_DEVICESIZE(wval);

so as this field has 1 reserved bit, that could be used in future,
just clear both bits and then OR with the desired value

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers
Will Deacon [Mon, 30 Jan 2012 19:23:29 +0000 (20:23 +0100)]
ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers

commit 8130b9d7b9d858aa04ce67805e8951e3cb6e9b2f upstream.

If we are context switched whilst copying into a thread's
vfp_hard_struct then the partial copy may be corrupted by the VFP
context switching code (see "ARM: vfp: flush thread hwstate before
restoring context from sigframe").

This patch updates the ptrace VFP set code so that the thread state is
flushed before the copy, therefore disabling VFP and preventing
corruption from occurring.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: 7307/1: vfp: fix ptrace regset modification race
Dave Martin [Mon, 30 Jan 2012 19:22:28 +0000 (20:22 +0100)]
ARM: 7307/1: vfp: fix ptrace regset modification race

commit 247f4993a5974e6759606c4d380748eecfd273ff upstream.

In a preemptible kernel, vfp_set() can be preempted, causing the
hardware VFP context to be switched while the thread vfp state is
being read and modified.  This leads to a race condition which can
cause the thread vfp state to become corrupted if lazy VFP context
save occurs due to preemption in between the time thread->vfpstate
is read and the time the modified state is written back.

This may occur if preemption occurs during the execution of a
ptrace() call which modifies the VFP register state of a thread.
Such instances should be very rare in most realistic scenarios --
none has been reported, so far as I am aware.  Only uniprocessor
systems should be affected, since VFP context save is not currently
lazy in SMP kernels.

The problem was introduced by my earlier patch migrating to use
regsets to implement ptrace.

This patch does a vfp_sync_hwstate() before reading
thread->vfpstate, to make sure that the thread's VFP state is not
live in the hardware registers while the registers are modified.

Thanks to Will Deacon for spotting this.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe
Will Deacon [Mon, 30 Jan 2012 19:21:42 +0000 (20:21 +0100)]
ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframe

commit 2af276dfb1722e97b190bd2e646b079a2aa674db upstream.

Following execution of a signal handler, we currently restore the VFP
context from the ucontext in the signal frame. This involves copying
from the user stack into the current thread's vfp_hard_struct and then
flushing the new data out to the hardware registers.

This is problematic when using a preemptible kernel because we could be
context switched whilst updating the vfp_hard_struct. If the current
thread has made use of VFP since the last context switch, the VFP
notifier will copy from the hardware registers into the vfp_hard_struct,
overwriting any data that had been partially copied by the signal code.

Disabling preemption across copy_from_user calls is a terrible idea, so
instead we move the VFP thread flush *before* we update the
vfp_hard_struct. Since the flushing is performed lazily, this has the
effect of disabling VFP and clearing the CPU's VFP state pointer,
therefore preventing the thread from being updated with stale data on
the next context switch.

Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer
UK KIM [Fri, 27 Jan 2012 16:52:22 +0000 (01:52 +0900)]
ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer

commit 114395c61ad2eb5a7a5cd163fcadb2414e48245a upstream.

Signed-off-by: UK KIM <w0806.kim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs
Mark Brown [Fri, 20 Jan 2012 12:19:43 +0000 (12:19 +0000)]
ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs

commit 77231abe55433aa17eca712718745275853fa66d upstream.

For optimal performance the single ended line outputs require that the
line output VMID buffer be enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoALSA: HDA: Fix duplicated output to more than one codec
David Henningsson [Wed, 1 Feb 2012 11:05:41 +0000 (12:05 +0100)]
ALSA: HDA: Fix duplicated output to more than one codec

commit 54c2a89f60fd71b924d0f848ac892442951401a6 upstream.

This typo caused the wrong codec's nid to be checked for wcaps type.
As a result, sometimes speakers would duplicate the output sent to
HDMI output.

BugLink: https://bugs.launchpad.net/bugs/924320
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoreadahead: fix pipeline break caused by block plug
Shaohua Li [Fri, 3 Feb 2012 23:37:17 +0000 (15:37 -0800)]
readahead: fix pipeline break caused by block plug

commit 3deaa7190a8da38453c4fabd9dec7f66d17fff67 upstream.

Herbert Poetzl reported a performance regression since 2.6.39.  The test
is a simple dd read, but with big block size.  The reason is:

T1: ra (A, A+128k), (A+128k, A+256k)
T2: lock_page for page A, submit the 256k
T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted
because of plug and there isn't any lock_page till we hit page A+256k
because all pages from A to A+256k is in memory
T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't
submitted again.
T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is
waitting for (A+256k, A+512k) finish.

There is no request to disk in T3 and T4, so readahead pipeline breaks.

We really don't need block plug for generic_file_aio_read() for buffered
I/O.  The readahead already has plug and has fine grained control when I/O
should be submitted.  Deleting plug for buffered I/O fixes the regression.

One side effect is plug makes the request size 256k, the size is 128k
without it.  This is because default ra size is 128k and not a reason we
need plug here.

Vivek said:

: We submit some readahead IO to device request queue but because of nested
: plug, queue never gets unplugged.  When read logic reaches a page which is
: not in page cache, it waits for page to be read from the disk
: (lock_page_killable()) and that time we flush the plug list.
:
: So effectively read ahead logic is kind of broken in parts because of
: nested plugging.  Removing top level plug (generic_file_aio_read()) for
: buffered reads, will allow unplugging queue earlier for readahead.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoLinux 3.0.20
Greg Kroah-Hartman [Mon, 6 Feb 2012 17:31:45 +0000 (09:31 -0800)]
Linux 3.0.20

12 years agoPCI: Rework ASPM disable code
Matthew Garrett [Thu, 10 Nov 2011 21:38:33 +0000 (16:38 -0500)]
PCI: Rework ASPM disable code

commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream.

Right now we forcibly clear ASPM state on all devices if the BIOS indicates
that the feature isn't supported. Based on the Microsoft presentation
"PCI Express In Depth for Windows Vista and Beyond", I'm starting to think
that this may be an error. The implication is that unless the platform
grants full control via _OSC, Windows will not touch any PCIe features -
including ASPM. In that case clearing ASPM state would be an error unless
the platform has granted us that control.

This patch reworks the ASPM disabling code such that the actual clearing
of state is triggered by a successful handoff of PCIe control to the OS.
The general ASPM code undergoes some changes in order to ensure that the
ability to clear the bits isn't overridden by ASPM having already been
disabled. Further, this theoretically now allows for situations where
only a subset of PCIe roots hand over control, leaving the others in the
BIOS state.

It's difficult to know for sure that this is the right thing to do -
there's zero public documentation on the interaction between all of these
components. But enough vendors enable ASPM on platforms and then set this
bit that it seems likely that they're expecting the OS to leave them alone.

Measured to save around 5W on an idle Thinkpad X220.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoLinux 3.0.19
Greg Kroah-Hartman [Fri, 3 Feb 2012 17:19:48 +0000 (09:19 -0800)]
Linux 3.0.19

12 years agoUSB: cp210x: allow more baud rates above 1Mbaud
Johan Hovold [Sun, 15 Jan 2012 23:36:53 +0000 (00:36 +0100)]
USB: cp210x: allow more baud rates above 1Mbaud

commit d1620ca9e7bb0030068c3b45b653defde8839dac upstream.

Allow more baud rates to be set in [1M,2M] baud.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Preston Fick <preston.fick@silabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: initialise baud rate at open
Johan Hovold [Sun, 15 Jan 2012 23:36:52 +0000 (00:36 +0100)]
USB: cp210x: initialise baud rate at open

commit cdc32fd6f7b2b2580d7f1b74563f888e4dd9eb8a upstream.

The newer cp2104 devices require the baud rate to be initialised after
power on. Make sure it is set when port is opened.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Preston Fick <preston.fick@silabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: clean up, refactor and document speed handling
Johan Hovold [Sun, 15 Jan 2012 23:36:51 +0000 (00:36 +0100)]
USB: cp210x: clean up, refactor and document speed handling

commit e5990874e511d5bbca23b3396419480cb2ca0ee7 upstream.

Clean up and refactor speed handling.
Document baud rate handling for CP210{1,2,4,5,10}.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Preston Fick <preston.fick@silabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: fix up set_termios variables
Johan Hovold [Sun, 15 Jan 2012 23:36:49 +0000 (00:36 +0100)]
USB: cp210x: fix up set_termios variables

commit 34b76fcaee574017862ea3fa0efdcd77a9d0e57d upstream.

[Based on a patch from Johan, mangled by gregkh to keep things in line]

Fix up the variable usage in the set_termios call.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Preston Fick <preston.fick@silabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: do not map baud rates to B0
Johan Hovold [Sun, 15 Jan 2012 23:36:50 +0000 (00:36 +0100)]
USB: cp210x: do not map baud rates to B0

commit be125d9c8d59560e7cc2d6e2b65c8fd233498ab7 upstream.

We do not implement B0 hangup yet so map low baudrates to 300bps.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Preston Fick <preston.fick@silabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: fix CP2104 baudrate usage
Preston Fick [Tue, 17 Jan 2012 00:14:09 +0000 (18:14 -0600)]
USB: cp210x: fix CP2104 baudrate usage

commit 7f482fc88ac47662228d6b1f05759797c8936a30 upstream.

This fix changes the way baudrates are set on the CP210x devices from
Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV
command, and GET/SET_BAUDRATE command, while CP2104 and higher devices
only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in
kernel version 3.2.0 only implements the GET/SET_BAUDDIV command.

This patch implements the two new codes for the GET/SET_BAUDRATE
commands. Then there is a change in the way that the baudrate is
assigned or retrieved. This is done according to the CP210x USB
specification in AN571. This document can be found here:
http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart

Sections 5.3/5.4 describe the USB packets for the old baudrate method.
Sections 5.5/5.6 describe the USB packets for the new method. This
patch also implements the new request scheme, and eliminates the
unnecessary baudrate calculations since it uses the "actual baudrate"
method.

This patch solves the problem reported for the CP2104 in bug 42586,
and also keeps support for all other devices (CP2101/2/3).

This patchfile is also attached to the bug report on
bugzilla.kernel.org. This patch has been developed and test on the
3.2.0 mainline kernel version under Ubuntu 10.11.

Signed-off-by: Preston Fick <preston.fick@silabs.com>
[duplicate patch also sent by Johan - gregkh]
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cp210x: call generic open last in open
Johan Hovold [Sun, 15 Jan 2012 23:36:48 +0000 (00:36 +0100)]
USB: cp210x: call generic open last in open

commit 55b2afbb92ad92e9f6b0aa4354eb1c94589280c3 upstream.

Make sure port is fully initialised before calling generic open.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19
Renato Caldas [Fri, 6 Jan 2012 15:20:51 +0000 (15:20 +0000)]
USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19

commit 791b7d7cf69de11275e4dccec2f538eec02cbff6 upstream.

This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR,
using a Silabs CP2103 USB to UART Bridge.

Signed-off-by: Renato Caldas <rmsc@fe.up.pt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotcp: md5: using remote adress for md5 lookup in rst packet
shawnlu [Fri, 20 Jan 2012 12:22:04 +0000 (12:22 +0000)]
tcp: md5: using remote adress for md5 lookup in rst packet

[ Upstream commit 8a622e71f58ec9f092fc99eacae0e6cf14f6e742 ]

md5 key is added in socket through remote address.
remote address should be used in finding md5 key when
sending out reset packet.

Signed-off-by: shawnlu <shawn.lu@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agotcp: fix tcp_trim_head() to adjust segment count with skb MSS
Neal Cardwell [Sat, 28 Jan 2012 17:29:46 +0000 (17:29 +0000)]
tcp: fix tcp_trim_head() to adjust segment count with skb MSS

[ Upstream commit 5b35e1e6e9ca651e6b291c96d1106043c9af314a ]

This commit fixes tcp_trim_head() to recalculate the number of
segments in the skb with the skb's existing MSS, so trimming the head
causes the skb segment count to be monotonically non-increasing - it
should stay the same or go down, but not increase.

Previously tcp_trim_head() used the current MSS of the connection. But
if there was a decrease in MSS between original transmission and ACK
(e.g. due to PMTUD), this could cause tcp_trim_head() to
counter-intuitively increase the segment count when trimming bytes off
the head of an skb. This violated assumptions in tcp_tso_acked() that
tcp_trim_head() only decreases the packet count, so that packets_acked
in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to
pass u32 pkts_acked values as large as 0xffffffff to
ca_ops->pkts_acked().

As an aside, if tcp_trim_head() had really wanted the skb to reflect
the current MSS, it should have called tcp_set_skb_tso_segs()
unconditionally, since a decrease in MSS would mean that a
single-packet skb should now be sliced into multiple segments.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agords: Make rds_sock_lock BH rather than IRQ safe.
David S. Miller [Tue, 24 Jan 2012 22:03:44 +0000 (17:03 -0500)]
rds: Make rds_sock_lock BH rather than IRQ safe.

[ Upstream commit efc3dbc37412c027e363736b4f4c74ee5e8ecffc ]

rds_sock_info() triggers locking warnings because we try to perform a
local_bh_enable() (via sock_i_ino()) while hardware interrupts are
disabled (via taking rds_sock_lock).

There is no reason for rds_sock_lock to be a hardware IRQ disabling
lock, none of these access paths run in hardware interrupt context.

Therefore making it a BH disabling lock is safe and sufficient to
fix this bug.

Reported-by: Kumar Sanghvi <kumaras@chelsio.com>
Reported-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agonet: bpf_jit: fix divide by 0 generation
Eric Dumazet [Wed, 18 Jan 2012 07:21:42 +0000 (07:21 +0000)]
net: bpf_jit: fix divide by 0 generation

[ Upstream commit d00a9dd21bdf7908b70866794c8313ee8a5abd5c ]

Several problems fixed in this patch :

1) Target of the conditional jump in case a divide by 0 is performed
   by a bpf is wrong.

2) Must 'generate' the full function prologue/epilogue at pass=0,
   or else we can stop too early in pass=1 if the proglen doesnt change.
   (if the increase of prologue/epilogue equals decrease of all
    instructions length because some jumps are converted to near jumps)

3) Change the wrong length detection at the end of code generation to
   issue a more explicit message, no need for a full stack trace.

Reported-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agol2tp: l2tp_ip - fix possible oops on packet receive
James Chapman [Wed, 25 Jan 2012 02:39:05 +0000 (02:39 +0000)]
l2tp: l2tp_ip - fix possible oops on packet receive

[ Upstream commit 68315801dbf3ab2001679fd2074c9dc5dcf87dfa ]

When a packet is received on an L2TP IP socket (L2TPv3 IP link
encapsulation), the l2tpip socket's backlog_rcv function calls
xfrm4_policy_check(). This is not necessary, since it was called
before the skb was added to the backlog. With CONFIG_NET_NS enabled,
xfrm4_policy_check() will oops if skb->dev is null, so this trivial
patch removes the call.

This bug has always been present, but only when CONFIG_NET_NS is
enabled does it cause problems. Most users are probably using UDP
encapsulation for L2TP, hence the problem has only recently
surfaced.

EIP: 0060:[<c12bb62b>] EFLAGS: 00210246 CPU: 0
EIP is at l2tp_ip_recvmsg+0xd4/0x2a7
EAX: 00000001 EBX: d77b5180 ECX: 00000000 EDX: 00200246
ESI: 00000000 EDI: d63cbd30 EBP: d63cbd18 ESP: d63cbcf4
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Call Trace:
 [<c1218568>] sock_common_recvmsg+0x31/0x46
 [<c1215c92>] __sock_recvmsg_nosec+0x45/0x4d
 [<c12163a1>] __sock_recvmsg+0x31/0x3b
 [<c1216828>] sock_recvmsg+0x96/0xab
 [<c10b2693>] ? might_fault+0x47/0x81
 [<c10b2693>] ? might_fault+0x47/0x81
 [<c1167fd0>] ? _copy_from_user+0x31/0x115
 [<c121e8c8>] ? copy_from_user+0x8/0xa
 [<c121ebd6>] ? verify_iovec+0x3e/0x78
 [<c1216604>] __sys_recvmsg+0x10a/0x1aa
 [<c1216792>] ? sock_recvmsg+0x0/0xab
 [<c105a99b>] ? __lock_acquire+0xbdf/0xbee
 [<c12d5a99>] ? do_page_fault+0x193/0x375
 [<c10d1200>] ? fcheck_files+0x9b/0xca
 [<c10d1259>] ? fget_light+0x2a/0x9c
 [<c1216bbb>] sys_recvmsg+0x2b/0x43
 [<c1218145>] sys_socketcall+0x16d/0x1a5
 [<c11679f0>] ? trace_hardirqs_on_thunk+0xc/0x10
 [<c100305f>] sysenter_do_call+0x12/0x38
Code: c6 05 8c ea a8 c1 01 e8 0c d4 d9 ff 85 f6 74 07 3e ff 86 80 00 00 00 b9 17 b6 2b c1 ba 01 00 00 00 b8 78 ed 48 c1 e8 23 f6 d9 ff <ff> 76 0c 68 28 e3 30 c1 68 2d 44 41 c1 e8 89 57 01 00 83 c4 0c

Signed-off-by: James Chapman <jchapman@katalix.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agobonding: fix enslaving in alb mode when link down
Jiri Bohac [Wed, 18 Jan 2012 12:24:54 +0000 (12:24 +0000)]
bonding: fix enslaving in alb mode when link down

[ Upstream commit b924551bed09f61b64f21bffe241afc5526b091a ]

bond_alb_init_slave() is called from bond_enslave() and sets the slave's MAC
address. This is done differently for TLB and ALB modes.
bond->alb_info.rlb_enabled is used to discriminate between the two modes but
this flag may be uninitialized if the slave is being enslaved prior to calling
bond_open() -> bond_alb_initialize() on the master.

It turns out all the callers of alb_set_slave_mac_addr() pass
bond->alb_info.rlb_enabled as the hw parameter.

This patch cleans up the unnecessary parameter of alb_set_slave_mac_addr() and
makes the function decide based on the bonding mode instead, which fixes the
above problem.

Reported-by: Narendra K <Narendra_K@Dell.com>
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agonet caif: Register properly as a pernet subsystem.
Eric W. Biederman [Thu, 26 Jan 2012 14:04:53 +0000 (14:04 +0000)]
net caif: Register properly as a pernet subsystem.

[ Upstream commit 8a8ee9aff6c3077dd9c2c7a77478e8ed362b96c6 ]

caif is a subsystem and as such it needs to register with
register_pernet_subsys instead of register_pernet_device.

Among other problems using register_pernet_device was resulting in
net_generic being called before the caif_net structure was allocated.
Which has been causing net_generic to fail with either BUG_ON's or by
return NULL pointers.

A more ugly problem that could be caused is packets in flight why the
subsystem is shutting down.

To remove confusion also remove the cruft cause by inappropriately
trying to fix this bug.

With the aid of the previous patch I have tested this patch and
confirmed that using register_pernet_subsys makes the failure go away as
it should.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agonetns: Fail conspicously if someone uses net_generic at an inappropriate time.
Eric W. Biederman [Thu, 26 Jan 2012 14:02:55 +0000 (14:02 +0000)]
netns: Fail conspicously if someone uses net_generic at an inappropriate time.

[ Upstream commit 5ee4433efe99b9f39f6eff5052a177bbcfe72cea ]

By definition net_generic should never be called when it can return
NULL.  Fail conspicously with a BUG_ON to make it clear when people mess
up that a NULL return should never happen.

Recently there was a bug in the CAIF subsystem where it was registered
with register_pernet_device instead of register_pernet_subsys.  It was
erroneously concluded that net_generic could validly return NULL and
that net_assign_generic was buggy (when it was just inefficient).
Hopefully this BUG_ON will prevent people to coming to similar erroneous
conclusions in the futrue.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agonetns: fix net_alloc_generic()
Eric Dumazet [Thu, 26 Jan 2012 00:41:38 +0000 (00:41 +0000)]
netns: fix net_alloc_generic()

[ Upstream commit 073862ba5d249c20bd5c49fc6d904ff0e1f6a672 ]

When a new net namespace is created, we should attach to it a "struct
net_generic" with enough slots (even empty), or we can hit the following
BUG_ON() :

[  200.752016] kernel BUG at include/net/netns/generic.h:40!
...
[  200.752016]  [<ffffffff825c3cea>] ? get_cfcnfg+0x3a/0x180
[  200.752016]  [<ffffffff821cf0b0>] ? lockdep_rtnl_is_held+0x10/0x20
[  200.752016]  [<ffffffff825c41be>] caif_device_notify+0x2e/0x530
[  200.752016]  [<ffffffff810d61b7>] notifier_call_chain+0x67/0x110
[  200.752016]  [<ffffffff810d67c1>] raw_notifier_call_chain+0x11/0x20
[  200.752016]  [<ffffffff821bae82>] call_netdevice_notifiers+0x32/0x60
[  200.752016]  [<ffffffff821c2b26>] register_netdevice+0x196/0x300
[  200.752016]  [<ffffffff821c2ca9>] register_netdev+0x19/0x30
[  200.752016]  [<ffffffff81c1c67a>] loopback_net_init+0x4a/0xa0
[  200.752016]  [<ffffffff821b5e62>] ops_init+0x42/0x180
[  200.752016]  [<ffffffff821b600b>] setup_net+0x6b/0x100
[  200.752016]  [<ffffffff821b6466>] copy_net_ns+0x86/0x110
[  200.752016]  [<ffffffff810d5789>] create_new_namespaces+0xd9/0x190

net_alloc_generic() should take into account the maximum index into the
ptr array, as a subsystem might use net_generic() anytime.

This also reduces number of reallocations in net_assign_generic()

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE
Bjørn Mork [Fri, 20 Jan 2012 00:49:57 +0000 (01:49 +0100)]
USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE

commit 15699e6fafc3a90e5fdc2ef30555a04dee62286f upstream.

The probe does not strictly require the USB_CDC_DMM_TYPE
descriptor, which is a good thing as it makes the driver
usable on non-conforming interfaces.  A user could e.g.
bind to it to a CDC ECM interface by using the new_id and
bind sysfs files.  But this would fail with a 0 buffer length
due to the missing descriptor.

Fix by defining a reasonable fallback size: The minimum
device receive buffer size required by the CDC WMC standard,
revision 1.1

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB...
Bjørn Mork [Mon, 16 Jan 2012 14:11:59 +0000 (15:11 +0100)]
USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core

commit 655e247daf52b202a6c2d0f8a06dd2051e756ce4 upstream.

As it turns out, there was a mismatch between the allocated inbuf size
(desc->bMaxPacketSize0, typically something like 64) and the length we
specified in the URB (desc->wMaxCommand, typically something like 2048)

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
Bjørn Mork [Mon, 16 Jan 2012 14:11:57 +0000 (15:11 +0100)]
USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal

commit 62aaf24dc125d7c55c93e313d15611f152b030c7 upstream.

wdm_disconnect() waits for the mutex held by wdm_read() before
calling wake_up_all().  This causes a deadlock, preventing device removal
to complete.  Do the wake_up_all() before we start waiting for the locks.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohwmon: (sht15) fix bad error code
Vivien Didelot [Thu, 26 Jan 2012 20:59:00 +0000 (15:59 -0500)]
hwmon: (sht15) fix bad error code

commit 6edf3c30af01854c416f8654d3d5d2652470afd4 upstream.

When no platform data was supplied, returned error code was 0.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F
Guenter Roeck [Sat, 28 Jan 2012 01:56:06 +0000 (17:56 -0800)]
hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F

commit ad77c3e1808f07fa70f707b1c92a683b7c7d3f85 upstream.

NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt
is made to set those pwm channels to DC mode.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agohwmon: (f71805f) Fix clamping of temperature limits
Jean Delvare [Fri, 20 Jan 2012 15:09:23 +0000 (10:09 -0500)]
hwmon: (f71805f) Fix clamping of temperature limits

commit 86b2bbfdbd1fcc4a3aa62ccd3f245c40c5ad5b85 upstream.

Properly clamp temperature limits set by the user. Without this fix,
attempts to write temperature limits above the maximum supported by
the chip (255 degrees Celsius) would arbitrarily and unexpectedly
result in the limit being set to 0 degree Celsius.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoxHCI: Cleanup isoc transfer ring when TD length mismatch found
Andiry Xu [Wed, 18 Jan 2012 09:47:12 +0000 (17:47 +0800)]
xHCI: Cleanup isoc transfer ring when TD length mismatch found

commit cf840551a884360841bd3d3ce1ad0868ff0b759a upstream.

When a TD length mismatch is found during isoc TRB enqueue, it directly
returns -EINVAL. However, isoc transfer is partially enqueued at this time,
and the ring should be cleared.

This should be backported to kernels as old as 2.6.36, which contain the
commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed
enqueue in the middle of isoch TD."

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoxhci: Fix USB 3.0 device restart on resume.
Sarah Sharp [Tue, 15 Nov 2011 01:51:39 +0000 (17:51 -0800)]
xhci: Fix USB 3.0 device restart on resume.

commit d0cd5d482b8a6dc92c6c69a5387baf72ea84f23a upstream.

The xHCI hub port code gets passed a zero-based port number by the USB
core.  It then adds one to in order to find a device slot by port number
and device speed by calling xhci_find_slot_id_by_port.  That function
clearly states it requires a one-based port number.  The xHCI port
status change event handler was using a zero-based port number that it
got from find_faked_portnum_from_hw_portnum, not a one-based port
number.  This lead to the doorbells never being rung for a device after
a resume, or worse, a different device with the same speed having its
doorbell rung (which could lead to bad power management in the xHCI host
controller).

This patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agodrivers/usb/host/ehci-fsl.c: add missing iounmap
Julia Lawall [Thu, 12 Jan 2012 09:55:13 +0000 (10:55 +0100)]
drivers/usb/host/ehci-fsl.c: add missing iounmap

commit 2492c6e6454ff3edb11e273b071a6ea80a199c71 upstream.

Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: usbsevseg: fix max length
Harrison Metzger [Sun, 15 Jan 2012 14:43:24 +0000 (08:43 -0600)]
USB: usbsevseg: fix max length

commit 1097ccebe630170080c41df0edcf88e0626e9c75 upstream.

This changes the max length for the usb seven segment delcom device to 8
from 6. Delcom has both 6 and 8 variants and having 8 works fine with
devices which are only 6.

Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com>
Signed-off-by: Stuart Pook <stuart@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agovmwgfx: Fix assignment in vmw_framebuffer_create_handle
Ryan Mallon [Fri, 27 Jan 2012 21:51:40 +0000 (08:51 +1100)]
vmwgfx: Fix assignment in vmw_framebuffer_create_handle

commit bf9c05d5b6d19b3e4c9fe21047694e94f48db89b upstream.

The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Reviewed-by: Jakob Bornecrantz<jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agojsm: Fixed EEH recovery error
Lucas Kannebley Tavares [Mon, 9 Jan 2012 12:58:06 +0000 (10:58 -0200)]
jsm: Fixed EEH recovery error

commit 26aa38cafae0dbef3b2fe75ea487c83313c36d45 upstream.

There was an error on the jsm driver that would cause it to be unable to
recover after a second error is detected.

At the first error, the device recovers properly:

[72521.485691] EEH: Detected PCI bus error on device 0003:02:00.0
[72521.485695] EEH: This PCI device has failed 1 times in the last hour:
...
[72532.035693] ttyn3 at MMIO 0x0 (irq = 49) is a jsm
[72532.105689] jsm: Port 3 added

However, at the second error, it cascades until EEH disables the device:

[72631.229549] Call Trace:
...
[72641.725687] jsm: Port 3 added
[72641.725695] EEH: Detected PCI bus error on device 0003:02:00.0
[72641.725698] EEH: This PCI device has failed 3 times in the last hour:

It was caused because the PCI state was not being saved after the first
restore. Therefore, at the second recovery the PCI state would not be
restored.

Signed-off-by: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <brenohl@br.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoserial: amba-pl011: lock console writes against interrupts
Rabin Vincent [Tue, 17 Jan 2012 10:52:28 +0000 (11:52 +0100)]
serial: amba-pl011: lock console writes against interrupts

commit ef605fdb33883d687cff5ba75095a91b313b4966 upstream.

Protect against pl011_console_write() and the interrupt for
the console UART running concurrently on different CPUs.

Otherwise the console_write could spin for a long time
waiting for the UART to become not busy, while the other
CPU continuously services UART interrupts and keeps the
UART busy.

The checks for sysrq and oops_in_progress are taken
from 8250.c.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoTTY: fix UV serial console regression
Jiri Slaby [Thu, 12 Jan 2012 21:55:15 +0000 (22:55 +0100)]
TTY: fix UV serial console regression

commit 0eee50af5b13e00b3fb7a5fe8480419a71b8235d upstream.

Commit 74c2107759d (serial: Use block_til_ready helper) and its fixup
3f582b8c110 (serial: fix termios settings in open) introduced a
regression on UV systems. The serial eventually freezes while being
used. It's completely unpredictable and sometimes needs a heap of
traffic to happen first.

To reproduce this, yast installation was used as it turned out to be
pretty reliable in reproducing. Especially during installation process
where one doesn't have an SSH daemon running. And no monitor as the HW
is completely headless. So this was fun to find. Given the machine
doesn't boot on vanilla before 2.6.36 final. (And the commits above
are older.)

Unless there is some bad race in the code, the hardware seems to be
pretty broken. Otherwise pure MSR read should not cause such a bug,
or?

So to prevent the bug, revert to the old behavior. I.e. read modem
status only if we really have to -- for non-CLOCAL set serials.
Non-CLOCAL works on this hardware OK, I tried. See? I don't.

And document that shit.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
References: https://lkml.org/lkml/2011/12/6/573
References: https://bugzilla.novell.com/show_bug.cgi?id=718518
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agousb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.
Eric W. Biederman [Sat, 14 Jan 2012 05:32:06 +0000 (21:32 -0800)]
usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.

commit 6d443d8499e4e59ffb949759cdded32730f8d2f6 upstream.

Calling edge_remove_sysfs_attrs from edge_disconnect is too late
as the device has already been removed from sysfs.

Do the simple and obvious thing and make edge_remove_sysfs_attrs
the port_remove method.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Wolfgang Frisch <wfpub@roembden.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoqcaux: add more Pantech UML190 and UML290 ports
Dan Williams [Tue, 24 Jan 2012 23:16:54 +0000 (17:16 -0600)]
qcaux: add more Pantech UML190 and UML290 ports

commit 074cc73506f529f39fef32ad1c9e1d4cdd8acf6c upstream.

More ports we now know how to talk to.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-wdm: use two mutexes to allow simultaneous read and write
Bjørn Mork [Mon, 16 Jan 2012 11:41:48 +0000 (12:41 +0100)]
USB: cdc-wdm: use two mutexes to allow simultaneous read and write

commit e8537bd2c4f325a4796da33564ddcef9489b7feb upstream.

using a separate read and write mutex for locking is sufficient to make the
driver accept simultaneous read and write. This improves useability a lot.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: cdc-wdm: updating desc->length must be protected by spin_lock
Bjørn Mork [Mon, 16 Jan 2012 11:41:47 +0000 (12:41 +0100)]
USB: cdc-wdm: updating desc->length must be protected by spin_lock

commit c428b70c1e115c5649707a602742e34130d19428 upstream.

wdm_in_callback() will also touch this field, so we cannot change it without locking

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoUSB: ftdi_sio: Add more identifiers
Alan Cox [Thu, 26 Jan 2012 17:41:34 +0000 (17:41 +0000)]
USB: ftdi_sio: Add more identifiers

commit 2353f806c97020d4c7709f15eebb49b591f7306d upstream.

0x04d8, 0x000a: Hornby Elite

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>