wuhao [Sat, 26 Jan 2013 02:23:17 +0000 (10:23 +0800)]
rk3188 ds1006h: add kernel logo
黄涛 [Fri, 25 Jan 2013 12:44:15 +0000 (20:44 +0800)]
rk30: ddr: ddr_get_bw no in sram, else system may hand on ddr_get_cap
张晴 [Fri, 25 Jan 2013 11:40:15 +0000 (19:40 +0800)]
rk3168:rk3188:tps65910:support new tps65910 eeprom
黄涛 [Fri, 25 Jan 2013 11:17:03 +0000 (19:17 +0800)]
pack-kernel.sh: support rk3188
黄涛 [Fri, 25 Jan 2013 11:14:53 +0000 (19:14 +0800)]
screen.h: no deleted by make distclean
yzq [Fri, 25 Jan 2013 10:16:29 +0000 (18:16 +0800)]
ds1006h:fix rk610 dual screen mode lcd config
yzq [Fri, 25 Jan 2013 09:39:00 +0000 (17:39 +0800)]
rk3188:fix no display when system start
ddl [Fri, 25 Jan 2013 09:02:17 +0000 (17:02 +0800)]
camera(v0.x.0x1f): support rk3188 ,oneframe and pingpang
cym [Fri, 25 Jan 2013 08:14:03 +0000 (16:14 +0800)]
rk30/31 DDR:1.fix ddr_init err,especially DDR frenuency more then 480Mhz
2.support 16bit DDR bus width,must update loader at the same time
zyc [Fri, 25 Jan 2013 08:14:51 +0000 (16:14 +0800)]
camera:fix rk3188 cif bug,add softrest between frames.
wuhao [Fri, 25 Jan 2013 07:46:15 +0000 (15:46 +0800)]
rk3188 ds1006h: hym8563 shutdown do not disable clkout
xbw [Fri, 25 Jan 2013 07:30:31 +0000 (15:30 +0800)]
SDMMC:
unified engineering code version of SDMMC in your board-xxx.c
continue with the commit
aa56711b7b8a1f7888bca60289a156ab3e5e9778
xbw [Fri, 25 Jan 2013 07:25:24 +0000 (15:25 +0800)]
SDMMC:
unified engineering code version of SDMMC in your board-xxx.c
黄涛 [Fri, 25 Jan 2013 07:19:35 +0000 (15:19 +0800)]
rk: ddr_freq: static ddr_set_rate
黄涛 [Fri, 25 Jan 2013 07:18:48 +0000 (15:18 +0800)]
rk: remove unused ddr_freq.c
黄涛 [Fri, 25 Jan 2013 07:17:00 +0000 (15:17 +0800)]
rk_timer: v1.2, update sched clock support, only use 32bits
xbw [Fri, 25 Jan 2013 06:09:11 +0000 (14:09 +0800)]
SDMMC:
This macro of WIFI_HOST_WAKE temporarily unused Thus, it is moved to another file rk-sdmmc-wifi.c
xbw [Fri, 25 Jan 2013 03:12:30 +0000 (11:12 +0800)]
SDMMC:
add sd-sdio drive strength contorl.
But ,currently, for the time being does not use this setting.Later, there is a need, then start to use.
yzq [Fri, 25 Jan 2013 03:06:17 +0000 (11:06 +0800)]
HDMI:set some boards hdmi source lcdc defconfig
yzq [Fri, 25 Jan 2013 03:04:53 +0000 (11:04 +0800)]
HDMI:add hdmi source lcdc select config
yxj [Thu, 24 Jan 2013 15:17:50 +0000 (23:17 +0800)]
rk3188 lcdc:fix WIN1_VIRWIDTH err
yxj [Thu, 24 Jan 2013 10:11:28 +0000 (18:11 +0800)]
rk3188 lcdc:distinguish ARGB888 and XRGB888
yxj [Thu, 24 Jan 2013 10:10:59 +0000 (18:10 +0800)]
rk fb:distinguish ARGB888 and XRGB888
yj [Fri, 25 Jan 2013 02:27:33 +0000 (10:27 +0800)]
LR097:update board.c from board.xxx.tb.c
Zheng Yang [Fri, 25 Jan 2013 00:59:34 +0000 (08:59 +0800)]
rk2928 codec: reset codec when probe.
wuhao [Thu, 24 Jan 2013 14:19:31 +0000 (22:19 +0800)]
rk3188 ds1006: fix HDMI_SOURCE_DEFAULT HDMI_SOURCE_LCDC1
yzq [Thu, 24 Jan 2013 14:15:54 +0000 (22:15 +0800)]
rk3188:fix rk610 hdmi and one lcdc dual screen
yzq [Thu, 24 Jan 2013 14:11:57 +0000 (22:11 +0800)]
backlight:fix hdmi switch black screen
黄涛 [Thu, 24 Jan 2013 13:29:16 +0000 (21:29 +0800)]
rk_timer: version 1.1, fix too much irq bug when suspend/resume
yj [Thu, 24 Jan 2013 12:37:43 +0000 (20:37 +0800)]
LR097:enable hdmi from lcdc1
cym [Thu, 24 Jan 2013 09:31:53 +0000 (17:31 +0800)]
RK292X/RK30/RK31:add new process of DDR change frequency
yj [Thu, 24 Jan 2013 09:31:26 +0000 (17:31 +0800)]
LR097 config: arch/arm/configs/rk3188_LR097_defconfig
yj [Thu, 24 Jan 2013 09:05:10 +0000 (17:05 +0800)]
LR097 rk3188 : mod config and enable wifi & bluetooth & camera ..
cym [Thu, 24 Jan 2013 07:47:14 +0000 (15:47 +0800)]
RK30/RK31:fix ddr.c code error
yxj [Thu, 24 Jan 2013 07:47:31 +0000 (15:47 +0800)]
rk3188 lcdc:fix ACT_WIDTH/HEIGHT err
yxj [Thu, 24 Jan 2013 06:58:41 +0000 (14:58 +0800)]
board lr097:add ump reserve memory
yxj [Thu, 24 Jan 2013 06:25:13 +0000 (14:25 +0800)]
rk3188 lcdc:add dump lcdc reg function
yxj [Thu, 24 Jan 2013 03:05:08 +0000 (11:05 +0800)]
rk3188 lcdc:add vsync support
yxj [Thu, 24 Jan 2013 03:04:28 +0000 (11:04 +0800)]
rk_fb.h:add struct rk_fb_vysnc
yxj [Thu, 24 Jan 2013 02:46:54 +0000 (10:46 +0800)]
rk fb: add ioctl RK_FBIOSET_CONFIG_DONE,RK_FBIOSET_VSYNC_ENABLE
yxj [Thu, 24 Jan 2013 02:40:42 +0000 (10:40 +0800)]
rk fb:all fb address can be set by user ioctl
张晴 [Thu, 24 Jan 2013 07:33:01 +0000 (15:33 +0800)]
rk:act8846:support regulator_set_voltage_time, disable act8846 gpio3 when power on
cym [Thu, 24 Jan 2013 06:56:02 +0000 (14:56 +0800)]
RK30XX/RK31XX:CONFIG_ARCH_RKXXXX replace read chip_id from ROM
黄涛 [Thu, 24 Jan 2013 06:31:02 +0000 (14:31 +0800)]
rk3188: enable rk30_io_drive_strength_init
wuhao [Thu, 24 Jan 2013 04:20:38 +0000 (12:20 +0800)]
rk3188 ds1006h: sync rk3188_ds1006h_defconfig
hwg [Thu, 24 Jan 2013 03:01:47 +0000 (11:01 +0800)]
drivers/net/wireless/
yxj [Thu, 24 Jan 2013 02:28:40 +0000 (10:28 +0800)]
board LR097,rk3168 tb,ds1006h:lcdc device name rk30-lcdc
yxj [Thu, 24 Jan 2013 02:26:15 +0000 (10:26 +0800)]
rk3188 lcdc:rename driver name as rk30-lcdc
yxj [Thu, 24 Jan 2013 01:56:31 +0000 (09:56 +0800)]
rk3188 lcdc:add rk610 jetta support
xxx [Wed, 23 Jan 2013 18:06:23 +0000 (02:06 +0800)]
rk3188 remove volt diff control
wuhao [Wed, 23 Jan 2013 17:49:30 +0000 (01:49 +0800)]
rk3188 : add ds1006h
xxx [Wed, 23 Jan 2013 17:15:19 +0000 (01:15 +0800)]
edit dvfs regulator error reset setting
yxj [Wed, 23 Jan 2013 16:42:05 +0000 (00:42 +0800)]
add rk3188 LR097 defconfig
yxj [Wed, 23 Jan 2013 16:41:24 +0000 (00:41 +0800)]
rk3188 LR097:base version
黄涛 [Wed, 23 Jan 2013 16:40:48 +0000 (00:40 +0800)]
rk3188: fix ddr_get_cap
黄涛 [Wed, 23 Jan 2013 16:23:03 +0000 (00:23 +0800)]
rk3188: tb: support ddr init to 396MHz when boot
黄涛 [Wed, 23 Jan 2013 16:20:45 +0000 (00:20 +0800)]
rk3188: fix ddr init
yxj [Wed, 23 Jan 2013 14:37:31 +0000 (22:37 +0800)]
board rk3066b m701:use get_fb_size instead of RK30_FB0_MEM_SIZE
yxj [Wed, 23 Jan 2013 14:36:42 +0000 (22:36 +0800)]
update screen hsd100pxn hsd07pfw
yxj [Wed, 23 Jan 2013 14:35:05 +0000 (22:35 +0800)]
rk2928 lvds,rk610 lvds:move lvds connect MACRO to rk_screen.h
黄涛 [Wed, 23 Jan 2013 15:12:20 +0000 (23:12 +0800)]
rk30_i2s: fix for rk3188, add i2s1 support
黄涛 [Wed, 23 Jan 2013 15:09:20 +0000 (23:09 +0800)]
rk3188: fix cpu aix init
chenxing [Wed, 23 Jan 2013 14:57:44 +0000 (22:57 +0800)]
rk3188: clock clock_data debug
黄涛 [Wed, 23 Jan 2013 13:40:34 +0000 (21:40 +0800)]
rk3188: disable cpu axi init and ddr init temporily
黄涛 [Wed, 23 Jan 2013 13:31:49 +0000 (21:31 +0800)]
rk3168: tb: fix lcdc name
yxj [Wed, 23 Jan 2013 11:15:30 +0000 (19:15 +0800)]
rk3066b m701 defconfig:add RK610 LVDS config
yxj [Wed, 23 Jan 2013 07:49:08 +0000 (15:49 +0800)]
dp501:add more config for low power,now the total for dp501 is 265mw
Zheng Yang [Wed, 23 Jan 2013 10:15:37 +0000 (18:15 +0800)]
rk2928 codec: add soft reset.
kfx [Wed, 23 Jan 2013 09:27:16 +0000 (17:27 +0800)]
fixed spi compile error
xbw [Wed, 23 Jan 2013 06:36:21 +0000 (14:36 +0800)]
SDMMC: Eliminate some small flaws after supporting new iomux-API.
yxj [Wed, 23 Jan 2013 04:11:10 +0000 (12:11 +0800)]
board rk2928 tb:use get_fb_size instead of macro RK30_FB0_MEM_SIZE
yxj [Wed, 23 Jan 2013 04:09:32 +0000 (12:09 +0800)]
lcd screen hsd100pxn:add interface get_fb_size
yxj [Wed, 23 Jan 2013 03:36:50 +0000 (11:36 +0800)]
board rk30 sdk,LR097 DS1006H,rk3168 tb:use get_fb_size instead of RK30_FB0_MEM_SIZE
yxj [Wed, 23 Jan 2013 03:34:26 +0000 (11:34 +0800)]
rk screen:add interface to calculator fb size by screen resolution
黄涛 [Wed, 23 Jan 2013 03:33:13 +0000 (11:33 +0800)]
Revert "move rk_screen.h from board.h"
This reverts commit
1e2026750b15aaa3bf347ce1299e61d30b344222.
XieKedi [Wed, 23 Jan 2013 03:26:08 +0000 (11:26 +0800)]
rk3168 ds1006h : config do not set "Disable external hubs" by default
黄涛 [Wed, 23 Jan 2013 02:18:13 +0000 (10:18 +0800)]
rk: usb_detect: enable bvalid irq when usb uart enabled
wuhao [Wed, 23 Jan 2013 02:09:53 +0000 (10:09 +0800)]
rk3168 ds1006: config hdmi support
chenxing [Wed, 23 Jan 2013 02:00:04 +0000 (10:00 +0800)]
rk30: export dvfs_get_freq_volt_table/dvfs_set_freq_volt_table functions
黄涛 [Wed, 23 Jan 2013 01:49:26 +0000 (09:49 +0800)]
Merge remote-tracking branch 'stable/linux-3.0.y' into develop-3.0
Merge v3.0.60
Conflicts:
Makefile
yxj [Tue, 22 Jan 2013 12:51:12 +0000 (20:51 +0800)]
rk610_tv.h:use rk_fb.h instead of fb.h
yxj [Tue, 22 Jan 2013 12:50:35 +0000 (20:50 +0800)]
move rk_screen.h from board.h
yxj [Tue, 22 Jan 2013 12:49:27 +0000 (20:49 +0800)]
board rk30sdk,ds1006h,rk3168 tb:register display devices fb,lcdc,backlight by rk_platform_add_display_devices
yxj [Tue, 22 Jan 2013 12:45:43 +0000 (20:45 +0800)]
rkfb:add interface __rk_platform_add_display_devices
chenxing [Tue, 22 Jan 2013 12:31:07 +0000 (20:31 +0800)]
rk3168: ds1006h: update dvfs table
chenxing [Tue, 22 Jan 2013 10:26:50 +0000 (18:26 +0800)]
rk3188: add pm support
xbw [Tue, 22 Jan 2013 10:07:11 +0000 (18:07 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
xbw [Tue, 22 Jan 2013 10:06:47 +0000 (18:06 +0800)]
SDMMC:
1.Compatible with the new interface function of IOMUX-API.
2.To simplify the configuration of the sd-sdio-wifi.
xxx [Tue, 22 Jan 2013 10:05:40 +0000 (18:05 +0800)]
forget adding dvfs.c,so submit again
xbw [Tue, 22 Jan 2013 09:59:07 +0000 (17:59 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
xbw [Tue, 22 Jan 2013 09:54:47 +0000 (17:54 +0800)]
SDMMC:
1.Compatible with the new interface function of IOMUX-API
2.Eliminate the intererupt-card-det cause the wakeup.
xxx [Tue, 22 Jan 2013 09:52:44 +0000 (17:52 +0800)]
add dvfs.c in mach-rk3188 file
xkd [Tue, 22 Jan 2013 09:33:22 +0000 (17:33 +0800)]
reboot system if power off with dc charger pluged in
wuhao [Tue, 22 Jan 2013 09:32:14 +0000 (17:32 +0800)]
rk3168 ds1006: camera flash sgm3140
luowei [Tue, 22 Jan 2013 09:25:05 +0000 (17:25 +0800)]
SPIM:fix SPI_MODE_2 bug
xxx [Tue, 22 Jan 2013 09:23:22 +0000 (17:23 +0800)]
gpu clk adn gpu aclk is set at on time for rk3168 and rk3066B
yxj [Tue, 22 Jan 2013 08:29:00 +0000 (16:29 +0800)]
rk30 lcdc:enable frame start irq
yxj [Tue, 22 Jan 2013 08:17:15 +0000 (16:17 +0800)]
board rk30 sdk:modify fb_io_enable/disable function
yxj [Tue, 22 Jan 2013 07:39:19 +0000 (15:39 +0800)]
dp501: add config for low power,now the all power of dp501 is 303ma
chenxing [Tue, 22 Jan 2013 06:37:16 +0000 (14:37 +0800)]
rk3168/rk3188: update dvfs table to fit rk3188
projects / firefly-linux-kernel-4.4.55.git / log