video: rockchip: hdmi: v2: improved the hdmi nlpcm_mode for bitstream output

- Add the corresponding to samplerate for bitstream
- Add the audio type judgement when open the mode

Change-Id: Ic5bbd2ee214e707fd3695f1a1f359cd43fed9618
Signed-off-by: smj <smj@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ARM: dts: add 'support-emmcs' flag for RK3228 EVB board

Private flag of our downstream kernel.

Change-Id: I6dbfcb04748e9d54492df6df20382367ce1218b2
Signed-off-by: Yakir Yang <ykk@rock-chips.com>

ARM: configs: rockchip: enable es8323 support

Default enable es8323 codec in rockchip defconfig

Change-Id: I9a080fa72069d15bfe188d4b33c1fd06358f4839
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

ARM: dts: rockchip: add codec es8323 for rk3288 fennec

This patch makes es8323 work well on the RK3288-Fennec boards.

Change-Id: Ia71101363c5cc4a9650c21c5dbebcad4d785ebf8
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

ASoC: es8323: update codec es8323 driver

This patch update the es8323 codec drivers as follows:

o Remove snd_soc_control_type:
  Now that upstream remove definition of snd_soc_control_type.

o Replace SOC_DAPM_VALUE_ENUM:
  SOC_DAPM_VALUE_ENUM is replaced by SOC_DAPM_ENUM.

o Remove codec->dapm.bias_level = level:
  The line at the end of the set_bias_level callback to update the bias_level state. Now that upstream move this update into snd_soc_dapm_force_bias_level().

o Remove .owner = THIS_MODULE:
  No need to set .owner here.The i2c_driver core will do.

o module_i2c_driver:
  Convert to use module_i2c_driver is simple.

o Add match table:
  Add a device tree match table for es8323 codec driver.

o Add mclk:
  The I2S block provide the output clock as the mclk,so add it.

o Adjust code format:
  Adjust some problems of code format.

Change-Id: I8e0647310eb11325c39ebb408f75cc9ed28df71d
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

video: rockchip: dp: add sharp2.89" and AUO3.81" lcd for rockchip discrete vr device.

Change-Id: I6a43bb7da3feeb2a96df56b09aa4e77a9c4d8812
Signed-off-by: wjh <wjh@rock-chips.com>

ARM64: dts: rockchip: rk3399: add edp power domain

add pd_edp node.
add the edp needed power domain node for rk3399.

Change-Id: Ie1a4a7013b0d5cfc2b0180f701341a6b977a637a
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>

video: rockchip: edp: runtime get sync in probe if support uboot display

Change-Id: I0373ef165cf7e21410b05159d4ed25c69bf05d5e
Signed-off-by: xubilv <xbl@rock-chips.com>

ARM64: configs: remove btsdio in linux defconfig

It will cause conflict if we are using other vendor driver.

Change-Id: Ia5f6ccc22c1f733abc1569486d5a864e41d4f4a5
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: configs: remove btsdio in linux defconfig

It will cause conflict if we are using other vendor driver.

Change-Id: I269c253fae874acf1b0290f5f16ca1433cf33b15
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm64: dts: rockchip: add hall-sensor device node for rk3399-mid

Change-Id: Iaf9c8aebc1006fe6058536689c1561c66ddde162
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

sensor: add hall sensor mh248 driver support

Change-Id: Idc8a068af8de06c058a2553d174b75166436a5ed
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

Documentation: bindings: add DT documentation for rk_sensor.txt

Change-Id: I06710a0adf648deff3700ec66fba5ac658a49fe7
Signed-off-by: Bin Yang <yangbin@rock-chips.com>

drm/rockchip: vop: fix rk3036 no display

Rk3036 vop default is blank, so init vop with unblank.

Change-Id: I10c21af70cec95b7073f8c999e655031ee154747
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

arm: configs: enable mali devfreq in rockchip_linux_defconfig

Change-Id: Idb43bc4a60c4d1b22d330cf2ea1d0e4b48b60d4d
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

UPSTREAM: i2c: rk3x: Restore clock settings at resume time

Depending on a number of factors including:
- Which exact Rockchip SoC we're working with
- How deep we suspend
- Which i2c port we're on

We might lose the state of the i2c registers at suspend time.
Specifically we've found that on rk3399 the i2c ports that are not in
the PMU power domain lose their state with the current suspend depth
configured by ARM Tursted Firmware.

Note that there are very few actual i2c registers that aren't configured
per transfer anyway so all we actually need to re-configure are the
clock config registers.  We'll just add a call to rk3x_i2c_adapt_div()
at resume time and be done with it.

NOTE: On rk3399 on ports whose power was lost, I put printouts in at
resume time.  I saw things like:
  before: con=0x00010300, div=0x00060006
  after:  con=0x00010200, div=0x00180025

Change-Id: I9799a77b9f332ef6b72ca2a8c1ee348b470a4d53
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Tested-by: David Wu <david.wu@rock-chips.com>
[wsa: removed duplicate const]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

hid: rkvr: add remove sync process, add sync ioctl to sync with nanoc before trasmitting

Change-Id: I46c8577b2a9c8dd9b66597fba3775966f030ecfd
Signed-off-by: lanshh <lsh@rock-chips.com>

drivers: iio: imu: remove sync attribute in sysfs, we direct access hid-rkvr by ioctl

Change-Id: Ic3605da06f3c8388910b162cf468e03709a98dd0
Signed-off-by: lanshh <lsh@rock-chips.com>

arm64: dts: rockchip: keep wlan power in suspend for rk3399_evb

Change-Id: Iad47ee30f9668ad8ad558dbcebc9023b737911a1
Signed-off-by: zzc <zzc@rock-chips.com>

video: rockchip: fb: update for one vop dual mipi ver scan mode

Change-Id: I07b5970a6f3dc01110dde59615e537612c408e2a
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

phy: rockchip-inno-usb2: don't cancel chg_work if otg in host mode

Because chg_work is used for charge detection, so if OTG works in
Host mode, we don't need to initialize chg_work, and aslo we don't
need to cancel it when phy exit.

Change-Id: I19cbede5aeb4c1f7f8faa32f195fffb0fc71eca9
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

ARM64: dts: rk3399-evb: support ddr devfreq

Enable ddr devfreq for rk3399-evb.

Change-Id: Ie9f0f6d149f547fea35cabc995fe87f33e5c934d
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

ARM: dts: rockchip: add ums boot mode for Linux

Change-Id: I7f5edb9edbe5b9656fafdfb84f523aa45aa93d93
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

dt-bindings: soc: rockchip: add ums mode

On upstream uboot, we use ums mode to update firmware.
Add this flag to help enter USB Mass Storage mode.

Change-Id: I0e515bfd8703bd48d950b72787b365226af11ce9
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

FROMLIST: ARM: dts: rockchip: add syscon-reboot-mode DT node

Rockchip platform use a SYSCON mapped register store
the reboot mode magic value for bootloader to use when
system reboot. So add syscon-reboot-mode driver DT node
for rk3xxx/rk3036/rk3288 based platform

Change-Id: I625613021621bd07a531d29cdb4b7c31a8bfc364
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

arm: dts: add rk3288 miqi board

Change-Id: I2056e5698bc9f3ccad773859fd5168607516b6eb
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

MALI: rockchip: upgrade midgard DDK to r13p0-00rel0

Conflicts:

drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c
drivers/gpu/arm/midgard/backend/gpu/mali_kbase_power_model_simple.c
drivers/gpu/arm/midgard/backend/gpu/mali_kbase_power_model_simple.h
drivers/gpu/arm/midgard/mali_kbase_defs.h

Change-Id: Ia7b8004b09ce31a5af6414c27b8ec776c247835a
Signed-off-by: chenzhen <chenzhen@rock-chips.com>

drm/rockchip: vop: reject vlank control when vop is disabled

drm enable/disable_vblank callback maybe call when vop is disabled,
it would cause system hang, we need reject it.

Change-Id: I3825fc9074203579bba0f71b1135f77075af85bb
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

ARM: config: enable syscon reboot mode in rockchip linux defconfig

Change-Id: I4285f478d3923792ae75eadfbc146e332376c90c
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

drivers: rk_nand: move inline function from asm code to c code

move inline function "copy_from_user" and "copy_to_user" from
rk_ftl_arm_v8.S to rk_nand_base.c

Change-Id: Ibac121c2ef04357d1abb35c4dd225bd424503e02
Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>

arm64: dts: rockchip: move vibrator node to properly position on rk3399 tablet product

Change-Id: I352ae9e429de997cf9300f14320a363d93ce57b1
Signed-off-by: jerry.zhang <jerry.zhang@rock-chips.com>

ARM64: dts: rockchip: rk3399-evb: increase sdio clk to 150M

Change-Id: Id35a5ce58517fb48d2a3f348eb7c4571b83d3f5e
Signed-off-by: Weilong Gao <gwl@rock-chips.com>

arm64: dts: rockchip: pull down rst-gpio of gmac-phy at suspend for rk3399-box

Some phys would not enter low power mode by writing 'power down'
bit into phy common register0 such as RTL8211E. And pulling down
reset gpio is also a common way to make phy get low consumption,
if the supplied regulator of phy could not be disabled at suspend.

Change-Id: Ib01f48ec8c0bdec633868bb79e4155561ca6c471
Signed-off-by: David Wu <david.wu@rock-chips.com>

phy: rockchip-inno-usb2: support host only mode for otg port

With this patch, we can support host only mode for otg port
(e.g. rk3399 Type-C1 USB). We use of_usb_get_dr_mode_by_phy()
to get the string from property 'dr_mode' of the controller
device node.

Right now, we only support host only mode for phys which do
not have phy-cells, and don't support #phy-cells >= 1.

Change-Id: Ic15b4afdfd954d91e38dbce3c996176bf2d6f101
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

arm64: dts: rockchip: enable Type-C1 phy for rk3399 box USB3 Host

There is an USB3 Standard-A receptacle on the rk3399 box platform
with Type-C1 phy, this patch enalbe Type-C1 phy for the USB3 port.

Change-Id: I77074823e713b8a4c5e4ff693746d1bd2c3c139c
Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

phy: phy-rockchip-typec: support Type-C phy work without extcon

There is a Standard-A receptacle on the rk3399 box platform with
Type-C phy, which does not have an extern Type-C controller
(e.g. FUSB302), this result in failure when typec probe, this patch
add support without extcon for usb3.0, support of dp is not included
in this patch.

Change-Id: I1af87d311707a5d385017e10478f992d940000b8
Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>

usb: dwc3: introduce a connection flag for rockchip platform

We used dwc->connected flag for rockchip platform before, but this
flag can be modified both in dwc3_gadget_disconnect_interrupt() and
dwc3_rockchip_otg_extcon_evt_work(), this result in race condition
may casue USB hot plug failed.

A typical error case is:
Set DWC3 works as peripheral device, connect to PC, after
PC identifies the USB device, and then disconnet USB cable,
if dwc3_gadget_disconnect_interrupt() is called prior to
dwc3_rockchip_otg_extcon_evt_work(), it will cause extcon
work unable to do disconnect operation, and let DWC3 core
device stay in runtime active status. Then if we plug in
USB cable again, we'll fail to do runtime resume DWC3 core
and reinit it.

Change-Id: I1c06fa55c10b3dfb749b689a116ab939a6e13f97
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

UPSTREAM: USB: Fix of_usb_get_dr_mode_by_phy with a shared phy block

Some SoCs have a single phy-hw-block with multiple phys, this is
modelled by a single phy dts node, so we end up with multiple
controller nodes with a phys property pointing to the phy-node
of the otg-phy.

Only one of these controllers typically is an otg controller, yet we
were checking the first controller who uses a phy from the block and
then end up looking for a dr_mode property in e.g. the ehci controller.

This commit fixes this by adding an arg0 parameter to
of_usb_get_dr_mode_by_phy and make of_usb_get_dr_mode_by_phy
check that this matches the phandle args[0] value when looking for
the otg controller.

Conflicts:
drivers/usb/phy/phy-am335x.c

Change-Id: I0b999a7445399cb2c86060bdf662db8aab96d1cc
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
(cherry picked from commit ce15ed4c5dfb3f7757e6611902aed5db253af977)

UPSTREAM: usb: of: fix build breakage on !OF

If OF is disabled, we will try to define a stub for
of_usb_get_dr_mode_by_phy(), however that missed a
static inline annotation which made us redefine the
stub over and over again. Fix that.

Change-Id: I0e3594d2beb29273343dacf0af73f159ad30a35d
Fixes: 98bfb3946695 ("usb: of: add an api to get
dr_mode by the phy node")
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>
(cherry picked from commit be99c84300950e876074916b215b511f69f83d3b)

UPSTREAM: usb: of: add an api to get dr_mode by the phy node

Some USB phy drivers have different handling for the controller in each
dr_mode. But the phy driver does not have visibility to the dr_mode of
the controller.

This adds an api to return the dr_mode of the controller which
associates the given phy node.

Change-Id: I2bdf7ba8fbff03e8dd33a2f4642b4455bcdabd29
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 98bfb39466954c69d2a448e6ddcab6d91cd48e25)
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

video: kconfig: fix recursive dependency

error log:
drivers/video/fbdev/Kconfig:5:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:34: symbol DRM_KMS_FB_HELPER is selected by DRM_ROCKCHIP
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/rockchip/Kconfig:1: symbol DRM_ROCKCHIP depends on IOMMU_DMA
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/iommu/Kconfig:52: symbol IOMMU_DMA is selected by ARM_DMA_USE_IOMMU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/arm/Kconfig:105: symbol ARM_DMA_USE_IOMMU is selected by VIDEO_OMAP3
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/media/platform/Kconfig:86: symbol VIDEO_OMAP3 depends on VIDEO_V4L2
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/media/v4l2-core/Kconfig:6: symbol VIDEO_V4L2 depends on I2C
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/i2c/Kconfig:7: symbol I2C is selected by FB_DDC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:59: symbol FB_DDC is selected by FB_CYBER2000_DDC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:374: symbol FB_CYBER2000_DDC depends on FB_CYBER2000
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:362: symbol FB_CYBER2000 depends on FB

Change-Id: Ia65757ad3a220a601a0d1ef0fa34d9381c405dfe
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

misc: rk_scr: change config placement

to make merge happy

Change-Id: I7f7d16f2f471c34736f28d702c38a733fce95cd3
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

UPSTREAM: mmc: dw_mmc: Wait for data transfer after response errors

According to the DesignWare state machine description, after we get a
"response error" or "response CRC error" we move into data transfer
mode.  That means that we don't necessarily need to special case
trying to deal with the failure right away.  We can wait until we are
notified that the data transfer is complete (with or without errors)
and then we can deal with the failure.

It may sound strange to defer dealing with a command that we know will
fail anyway, but this appears to fix a bug.  During tuning (CMD19) on
a specific card on an rk3288-based system, we found that we could get
a "response CRC error".  Sending the stop command after the "response
CRC error" would then throw the system into a confused state causing
all future tuning phases to report failure.

When in the confused state, the controller would show these (hex codes
are interrupt status register):
 CMD ERR: 0x00000046 (cmd=19)
 CMD ERR: 0x0000004e (cmd=12)
 DATA ERR: 0x00000208
 DATA ERR: 0x0000020c
 CMD ERR: 0x00000104 (cmd=19)
 CMD ERR: 0x00000104 (cmd=12)
 DATA ERR: 0x00000208
 DATA ERR: 0x0000020c
 ...
 ...

It is inherently difficult to deal with the complexity of trying to
correctly send a stop command while a data transfer is taking place
since you need to deal with different corner cases caused by the fact
that the data transfer could complete (with errors or without errors)
during various places in sending the stop command (dw_mci_stop_dma,
send_stop_abort, etc)

Instead of adding a bunch of extra complexity to deal with this, it
seems much simpler to just use the more straightforward (and less
error-prone) path of letting the data transfer finish.  There
shouldn't be any huge benefit to sending the stop command slightly
earlier, anyway.

BUG=redmine:102457

(cherry picked from commit 46d179525a1f6d16957dcb4624517bc04142b3e7)

Change-Id: I1356df95ea7851b2143ba48dc66310e203341721
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

drm/rockchip: fix error when build rockchip drm as modules

fix build error:
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:
    In function 'rockchip_drm_fb_destroy':
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:74:21:
    error: 'struct rockchip_drm_fb' has no member named 'sgt'

Change-Id: I413391291be21ebf452bde340a788dcf2d1c76d4
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

driver, mpu: Increase the speed of wake up after hardware power off

Change-Id: I191324c9d4c2e5c632c6de4a408f99174f019203
Signed-off-by: Zorro Liu <lyx@rock-chips.com>

UPSTREAM: clk: rockchip: use rk3288-efuse clock ids

Reference the newly added efuse clock-ids in the clock-tree.

Change-Id: I6951728bf84be9b2af99b3c7dbebfde327a89790
Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 60ecbd9d94600121ee9e8fed523e62c19f269893)

video: rockchip: vop: 3288: add parse dsp mode for VR

Change-Id: I6a8a753146591fce74df1606fcd551024778f1d1
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

video: rockchip: vop: 3399: add parse dsp mode for VR

Change-Id: Ia3d11083a87742344c790044658b3ff61d29c091
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

ARM64: rockchip_defconfig: enable nvmem and rockchip efuse

Change-Id: Iea135fdd5d61c38349285564cf33d704dd38b2c3
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rockchip: add efuse0 device node for rk3399

Add a efuse0 node in the device tree for the ARM64 rk3399 SoC.

Change-Id: I603e02177138f699b8b5f9d5609573547076e058
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

UPSTREAM: nvmem: rockchip-efuse: add rk3399-efuse support

1) the efuse timing of rk3399 is different from earlier SoCs.
2) rk3399-efuse is organized as 32bits by 32 one-time programmable
electrical fuses, the efuse of earlier SoCs is organized as 32bits
by 8 one-time programmable electrical fuses with random access interface.

This patch adds a new read function for rk3399-efuse.

Change-Id: I04c70a18f7f7e77eded6ffde132baac47b3aff73
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 02baff325462cc7e81241b21959c5e62e7ca575e)

UPSTREAM: nvmem: rockchip-efuse: update compatible strings for Rockchip efuse

Rk3399-efuse is organized as 32bits by 32 one-time programmable electrical
fuses. The efuse of earlier SoCs are organized as 32bits by 8 one-time
programmable electrical fuses with random access interface.

Add different device tree compatible string for different SoCs to be able
to differentiate between the two. The old binding is of course preserved,
though deprecated.

Change-Id: Id8e0e95dd1c7897235afd47d5576d15cfcb577cc
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit b3149f4e333eb629e0c4c100f337edb0b37cdb79)

ARM64: dts: rk3399-mid: close gpu power in suspend

Change-Id: Ie8d8eea49c6f7637d4e0e4b3e8749f04e90603a8
Signed-off-by: Yankun Zheng <zyk@rock-chips.com>

video: rockchip: rk fb: add disp mode for VR

DEFAULT_MODE: default mode
ONE_VOP_DUAL_MIPI_HOR_SCAN: one vop to dual mipi screen hor scan
ONE_VOP_DUAL_MIPI_VER_SCAN: one vop to dual mipi screen ver scan
TWO_VOP_DUAL_MIPI: two vop to dual mipi screen

Change-Id: I48a96369059afd5615ebf41b4b6178d7206c4f72
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

video: rockchip: vop: 3399: add support serial rgb 8bit output

Change-Id: I297cc8ba92e0b120a5d72eaf9abe361cf564563f
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

arm64: dts: rockchip: change rt5651 card name on rk3399-sapphire-excavator

Change-Id: If5ccdbc40a99bf7015d2c5dbf8da2638b23a60e7
Signed-off-by: Huang zhibao <hzb@rock-chips.com>

arm64: rockchip: rockchip_defconfig enable rt5651 codec

Change-Id: If2b69169d32c1863187a073c37d049dcac9f108a
Signed-off-by: Huang zhibao <hzb@rock-chips.com>

video: rockchip: fb: add reference count for vsync

Change-Id: I76ff8489f3e71f21de3461c0834424b5d1bf1962
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

phy: rockchip-inno-usb2: correct 480m output clock stable time.

We found that the system on rk3366 SoC was crashed due to 480m
output clock of usb-phy was unstable after clock had been enabled by
gpu module.

Theoretically, 1 millisecond is a critical value for 480 output clock
stable time, so we try changing the delay time to 1.2 millisecond to
avoid this issue.

Change-Id: I8790eb3d7fccc9fbaa7b49f8d4386df147a95b75
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>

BACKPORT: Don't show empty tag stats for unprivileged uids

BUG: 27577101
BUG: 27532522
hxw: fix cts com.android.cts.appsecurity.AppSecurityTests#testAppFailAccessPrivateData fail

Change-Id: Id6f7933b966ecad0b4d1249ea8ade86b97477545
Signed-off-by: Mohamad Ayyash <mkayyash@google.com>
Signed-off-by: HaoXiaowei <hxw@rock-chips.com>

drm/rockchip: vop: move plane calculate to atomic_check

Change-Id: I0efe9ee4a17dc48efac95ea081a0cfe79eec34a1
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: vop: remove unused device

Change-Id: I4315e17c0c6c2c9e2528072e330af9309df96ea3
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

ARM64: dts: rockchip: rk3399-vr: vcc3v3_s3/vdd_center off when sleep

Change-Id: Ic96087fbb0e8187920f1f5278c3db089f1688378
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>

net: rkwifi: add 'disable_proptx = 1' for AP6354

This patch add to fix AP6354's throughput abnormal in p2p mode.

Change-Id: I8c52981dfacee092493442d3223066f9d82c0334
Signed-off-by: Weilong Gao <gwl@rock-chips.com>

arm64: dts: rk3399-box: adjust cpul opp table

Adjust voltage of 1512M to 1.125v

Change-Id: I7da47f0df8b45cb769e5f273d334ce9056347235
Signed-off-by: Hans Yang <yhx@rock-chips.com>

ARM: dts: rk3288: remove nau8825 node for miniarm

This patch remove nau8825 sound card node for rk3288-miniarm board,
because the change of hardware.

Change-Id: I2bc447bb247cbc5da9452591ee13dd3ae101c299
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

Revert "UPSTREAM: usb: dwc3: gadget: disable XFER_NOT_READY"

This reverts commit 2a1f2d1e890354821dd8a8e621998d532185061d.

Refer to DWC3 databook, Table 7-7 Device Endpoint-n Events(DEPEVT),
XferNotReady is generated when the core responds NRDY to the host
on the USB. It is useful in the beginning of a transfer when
software wants to wait for the host to start polling the endpoint
before setting up TRBs. And also refer to 8.2.4 Transfer Setup
Recommendations, when using on-demand transfers, the XferNotRead
event must be enabled.

TEST=Set usb gadget work as RNDIS, connect to win7/win10, check
the RNDIS function

Change-Id: I091cd3ff4a3c93e6cc02fcc6714511c8989786bf
Signed-off-by: Wu Liang feng <wulf@rock-chips.com>

video: rockchip: vop: 3366: add reg restore for interrupt register

Change-Id: I088d4ef85acc786f8e5ec123b73f6ed504c83dcd
Signed-off-by: Huang Jiachai <hjc@rock-chips.com>

ASoC: es8316: fix pop noise issue when shutdown and reboot

Change-Id: Iceb02b033803afd0e66ea34a4d04e02d4487a557
Signed-off-by: zhangjun <zhangjun@rock-chips.com>

ARM: dts: rockchip: add sdcard io-domain node for miniarm

Both 3.3v and 1.8v are available on rk3288-miniarm board, so add sd
io-domain support in case need to deploy UHS speed mode.

Change-Id: I44a7c775620e32105c8c1b91219aac8b9d8b9e92
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

ASoC: rt5651: add codec driver

Change-Id: Id538b6e4abb33fb6c01a5d7e89d1a0f269f29867
Signed-off-by: Huang zhibao <hzb@rock-chips.com>

arm64: dts: rk3399: add reserved memory for drm loader display

Change-Id: Icaccabf30f25605d35ae1d067b2576c8837a0aac
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drm/rockchip: optimize the loader display

Change-Id: Iaa3066a5f1eb2e76a30c887823aba489776cb68a
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

input: make light sensor cm32181 works on rk3399 tablet product

Change-Id: I6a3e93ea5480ab66f2b67a826a88ac7e7f1416c8
Signed-off-by: jerry.zhang <jerry.zhang@rock-chips.com>

rockchip/vcodec: remove noisy log on encoder

New user encoder will send larger register size to kernel with extra
info right after the register file. The extra information will specify
the offset patch for address registers. This behavior will cause a lot
of noisy log. So we need to disable it.

Change-Id: I32609be325482b445ee6e97f7f4a245d6d0dc9c2
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>

dt-bindings: Add AUO H546DLB01 single channel MIPI screen dts

H546dlb01 is a 5.46 inch OLED screen with resolution 1080x1920.

Change-Id: I977f355c53c58f6dba46c4581fc8190bfce04cf2
Signed-off-by: bivvy <bivvy.bi@rock-chips.com>

cpufreq: interactive: add touch boost and init some param on rockchip platform

Change-Id: Iebc2edaedbeeb5a3a758b963230b5f95136b2af6
Signed-off-by: Chen Liang <cl@rock-chips.com>

ARM64: rockchip: cpufreq-dt: enable CPUFREQ_HAVE_GOVERNOR_PER_POLICY

The cpu class need independent governor tunables for big/little system.

Change-Id: I0c31f694b6790c05c18b0c3d5522fa75143f293e
Signed-off-by: Chen Liang <cl@rock-chips.com>

staging: android: add timed gpio driver to present vibrator control interface to userspace

Change-Id: I725a8620669c4286dda5bcbbbd1b984843a6b006
Signed-off-by: jerry.zhang <jerry.zhang@rock-chips.com>

arm64: dts: rockchip: add vibrator device node for rk3399 tablet product

Change-Id: I932bd2e56c7addbb7b4f725ad5c31779125dfc57
Signed-off-by: jerry.zhang <jerry.zhang@rock-chips.com>

ARM64: dts: rockchip: rk3399-tablet/vr: disabled cpu_l 1.5G

Change-Id: Iddaea7efc29d513d547d30f73f5cfee054605153
signed-off-by: Wu Liangqing <wlq@rock-chips.com>

video: rockchip: dp: fix dp bugs when dp probing and connecting.

set port->cap_lanes to 0 when dp connected error last time, and allow
dp go on probing if there is only one fusb302.

Change-Id: I90169f77ac02a94f42da96f20aacfd51b898de09
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

arm64: dts: rockchip: enable dp for sapphire-excavator-edp board

Change-Id: I7097592d124952bf12677c69146576525a125bbe
Signed-off-by: Zorro Liu <lyx@rock-chips.com>

drivers: iio: imu: add sync attribute in sysfs,for HAL sending sync message to nanoc

Change-Id: I1ab3e116207e88fa380e90ffcc84866ffcec01ce
Signed-off-by: lanshh <lsh@rock-chips.com>

hid: rkvr: add sync process before start snesor data transfer if sync_string no empty

Change-Id: Ifd20949963171fff4df694b58b629065a37ea492
Signed-off-by: lanshh <lsh@rock-chips.com>

ARM64: dts: rockchip: rk3399-tablet: modify the gpu's opp table

Change-Id: I42aa5514b64882b5c0b7eabcc01e2c908321e1a8
signed-off-by: Wu Liangqing <wlq@rock-chips.com>

arm64: dts: rockchip: enable typec0 for Sapphire board

Change-Id: I9a32472307329ed6d7121359f77aa1aaba501821
Signed-off-by: Zorro Liu <lyx@rock-chips.com>

ARM64: dts: rk3399: enable cdn_dp_fb for box

Change-Id: Idf28d25381b20e1a92193a3a825405a6ef41dfa5
Signed-off-by: xuhuicong <xhc@rock-chips.com>

video: rockchip: dp: fix sound problam when disconnect to dp

Change-Id: I49b96426939f0c9d1c016ca00cc5df1f43cbf848
Signed-off-by: xuhuicong <xhc@rock-chips.com>

soc: rockchip: mmc: add emmc vendor storage

Change-Id: I3996cccaed265af2295dbc1ee77746928e1beec5
Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>

ARM: dts: rockchip: Add SPDIF optical out on rk3288-firefly

Enable the SPDIF optical output on rk3288-firefly boards.

Change-Id: I84701df1b193e69673a963045cbd9fb4069e9741
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

ARM: dts: rockchip: make vcca_33 always on in firefly board

rk3288-firefly board needs vcca_33 to be always on.

Change-Id: Iffde1a2857b92d10bf8f306c2257480fdf7f091c
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

MALI: midgard: RK: fix compiling fail without CONFIG_REGULATOR defined

Change-Id: I4eb6fcae00d934c1fc2cbffc888a88c2fda9c22d
Signed-off-by: chenzhen <chenzhen@rock-chips.com>

ARM64: dts: rockchip: rk3399-vr: set syr827 pwm mode

Change-Id: I8916c1f34f5dd39c500e0e18fe174ce1c62607b4
signed-off-by: Wu Liangqing <wlq@rock-chips.com>

ARM64: dts: rk3399-mid: ajust eas parameter

Ajust eas parameter to match opp table.

Change-Id: I752b5271ab1bffb009135708250694ac2d3c5e1c
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

backlight: move the backlight off operation to the front of the LCD

The backlight pwm operation depends on vop module if vop_pwm enabled.

Change-Id: I5b87e4dabb4ef3767344a60e7e324d23fbbbc1cd
Signed-off-by: Zhou weixin <zwx@rock-chips.com>

arm64: dts: rk3399-vr: modify the cpu's opp table

Change-Id: I7f659dd159188205c6f8ee12bd0d2c189854cf34
signed-off-by: Wu Liangqing <wlq@rock-chips.com>

arm64: dts: rk3399-vr: modify the gpu's opp table

Change-Id: I52483fd8fd85d97ff8bef1908a1a370fb8b62aec
signed-off-by: Wu Liangqing <wlq@rock-chips.com>

video: rockchip: dp: add support for nanoc discret vr device.

add feature of SUPPORT_RK_DISCRETE_VR for discrete vr device in dp,
and add sync code for nanoc vr device.

Change-Id: I5fe1f29ede8ac35f99b62e524bf541a7aaee4307
Signed-off-by: wenping.zhang <wenping.zhang@rock-chips.com>

arm64: rockchip_defconfig: add CONFIG_HID_RKVR for rkvr

Change-Id: I67b1a1af3756b78773a9e7a0853e6c22faac11c5
Signed-off-by: lanshh <lsh@rock-chips.com>