mac80211: fix a memory leak on sta rate selection table

commit 53d045258ee2e38b1e882617cb0799a04d05f5fa upstream.

If the rate control algorithm uses a selection table, it
is leaked when the station is destroyed - fix that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com>
Fixes: 0d528d85c519 ("mac80211: improve the rate control API")
[add commit log entry, remove pointless NULL check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't check netdev state for debugfs read/write

commit 923eaf367206e01f22c97aee22300e332d071916 upstream.

Doing so will lead to an oops for a p2p-dev interface, since it has
no netdev.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ina2xx) Cast to s16 on shunt and current regs

commit c0214f98943b1fe43f7be61b7782b0c8f0836f28 upstream.

All devices supported by ina2xx are bidirectional and report the
measured shunt voltage and power values as a signed 16 bit, but the
current driver implementation caches all registers as u16, leading
to an incorrect sign extension when reporting to userspace in
ina2xx_get_value().

This patch fixes the problem by casting the signed registers to s16.
Tested on an INA219.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: handle parent_overlap on writes correctly

commit 9638556a276125553549fdfe349c464481ec2f39 upstream.

The following check in rbd_img_obj_request_submit()

    rbd_dev->parent_overlap <= obj_request->img_offset

allows the fall through to the non-layered write case even if both
parent_overlap and obj_request->img_offset belong to the same RADOS
object.  This leads to data corruption, because the area to the left of
parent_overlap ends up unconditionally zero-filled instead of being
populated with parent data.  Suppose we want to write 1M to offset 6M
of image bar, which is a clone of foo@snap; object_size is 4M,
parent_overlap is 5M:

    rbd_data.<id>.0000000000000001
     ---------------------|----------------------|------------
    | should be copyup'ed | should be zeroed out | write ...
     ---------------------|----------------------|------------
   4M                    5M                     6M
                    parent_overlap    obj_request->img_offset

4..5M should be copyup'ed from foo, yet it is zero-filled, just like
5..6M is.

Given that the only striping mode kernel client currently supports is
chunking (i.e. stripe_unit == object_size, stripe_count == 1), round
parent_overlap up to the next object boundary for the purposes of the
overlap check.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: use reference counts for image requests

commit 0f2d5be792b0466b06797f637cfbb0f64dbb408c upstream.

Each image request contains a reference count, but to date it has
not actually been used.  (I think this was just an oversight.) A
recent report involving rbd failing an assertion shed light on why
and where we need to use these reference counts.

Every OSD request associated with an object request uses
rbd_osd_req_callback() as its callback function.  That function will
call a helper function (dependent on the type of OSD request) that
will set the object request's "done" flag if the object request if
appropriate.  If that "done" flag is set, the object request is
passed to rbd_obj_request_complete().

In rbd_obj_request_complete(), requests are processed in sequential
order.  So if an object request completes before one of its
predecessors in the image request, the completion is deferred.
Otherwise, if it's a completing object's "turn" to be completed, it
is passed to rbd_img_obj_end_request(), which records the result of
the operation, accumulates transferred bytes, and so on.  Next, the
successor to this request is checked and if it is marked "done",
(deferred) completion processing is performed on that request, and
so on.  If the last object request in an image request is completed,
rbd_img_request_complete() is called, which (typically) destroys
the image request.

There is a race here, however.  The instant an object request is
marked "done" it can be provided (by a thread handling completion of
one of its predecessor operations) to rbd_img_obj_end_request(),
which (for the last request) can then lead to the image request
getting torn down.  And this can happen *before* that object has
itself entered rbd_img_obj_end_request().  As a result, once it
*does* enter that function, the image request (and even the object
request itself) may have been freed and become invalid.

All that's necessary to avoid this is to properly count references
to the image requests.  We tear down an image request's object
requests all at once--only when the entire image request has
completed.  So there's no need for an image request to count
references for its object requests.  However, we don't want an
image request to go away until the last of its object requests
has passed through rbd_img_obj_callback().  In other words,
we don't want rbd_img_request_complete() to necessarily
result in the image request being destroyed, because it may
get called before we've finished processing on all of its
object requests.

So the fix is to add a reference to an image request for
each of its object requests.  The reference can be viewed
as representing an object request that has not yet finished
its call to rbd_img_obj_callback().  That is emphasized by
getting the reference right after assigning that as the image
object's callback function.  The corresponding release of that
reference is done at the end of rbd_img_obj_callback(), which
every image object request passes through exactly once.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: update discard_granularity to reflect the thin-pool blocksize

commit 09869de57ed2728ae3c619803932a86cb0e2c4f8 upstream.

DM thinp already checks whether the discard_granularity of the data
device is a factor of the thin-pool block size.  But when using the
dm-thin-pool's discard passdown support, DM thinp was not selecting the
max of the underlying data device's discard_granularity and the
thin-pool's block size.

Update set_discard_limits() to set discard_granularity to the max of
these values.  This enables blkdev_issue_discard() to properly align the
discards that are sent to the DM thin device on a full block boundary.
As such each discard will now cover an entire DM thin-pool block and the
block will be reclaimed.

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix locking of hdev when calling into SMP code

commit c73f94b8c093a615ce80eabbde0ac6eb9abfe31a upstream.

The SMP code expects hdev to be unlocked since e.g. crypto functions
will try to (re)lock it. Therefore, we need to release the lock before
calling into smp.c from mgmt.c. Without this we risk a deadlock whenever
the smp_user_confirm_reply() function is called.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix check for connection encryption

commit e694788d73efe139b24f78b036deb97fe57fa8cb upstream.

The conn->link_key variable tracks the type of link key in use. It is
set whenever we respond to a link key request as well as when we get a
link key notification event.

These two events do not however always guarantee that encryption is
enabled: getting a link key request and responding to it may only mean
that the remote side has requested authentication but not encryption. On
the other hand, the encrypt change event is a certain guarantee that
encryption is enabled. The real encryption state is already tracked in
the conn->link_mode variable through the HCI_LM_ENCRYPT bit.

This patch fixes a check for encryption in the hci_conn_auth function to
use the proper conn->link_mode value and thereby eliminates the chance
of a false positive result.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix SSP acceptor just-works confirmation without MITM

commit ba15a58b179ed76a7e887177f2b06de12c58ec8f upstream.

From the Bluetooth Core Specification 4.1 page 1958:

"if both devices have set the Authentication_Requirements parameter to
one of the MITM Protection Not Required options, authentication stage 1
shall function as if both devices set their IO capabilities to
DisplayOnly (e.g., Numeric comparison with automatic confirmation on
both devices)"

So far our implementation has done user confirmation for all just-works
cases regardless of the MITM requirements, however following the
specification to the word means that we should not be doing confirmation
when neither side has the MITM flag set.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix incorrect write to read-only register v2:

commit 4e578080ed3262ed2c3985868539bc66218d25c0 upstream.

Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a
vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register:
SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to
SVGA_REG_PITCHLOCK.

This patch is Cc'd stable because of the unknown effects writing to this
register might have, particularly on older device versions.

v2: Updated log message.

Cc: Christopher Friedt <chrisfriedt@gmail.com>
Tested-by: Christopher Friedt <chrisfriedt@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission

commit ec65da385d46f63740c1c9230b891a6dcbd64c71 upstream.

It hangs the hardware.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/atom: fix dithering on certain panels

commit 642528355c694f5ed68f6bff9ff520326a249f99 upstream.

We need to specify the encoder mode as LVDS for eDP
when using the Crtc_Source atom table in order to properly
set up the FMT hardware.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73911

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices

commit 3b6d9fd23e015b5397c438fd3cd74147d2c805b6 upstream.

Only DCE5+ asics support DP 1.2.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix typo in radeon_connector_is_dp12_capable()

commit af5d36539dfe043f1cf0f8b7334d6bb12cd14e75 upstream.

We were checking the ext clock rather than the display clock.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi

commit 7d5ab3009a8ca777174f6f469277b3922d56fd4b upstream.

May fix display issues with non-HDMI displays.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: omap: fix BCHx ecc.correct to return detected bit-flips in erased-page

commit f306e8c3b667632952f1a4a74ffb910bbc06255f upstream.

fixes: commit 62116e5171e00f85a8d53f76e45b84423c89ff34
       mtd: nand: omap2: Support for hardware BCH error correction.

In omap_elm_correct_data(), if bitflip_count in an erased-page is within the
correctable limit (< ecc.strength), then it is not indicated back to the caller
ecc->read_page().

This mis-guides upper layers like MTD and UBIFS layer to assume erased-page as
perfectly clean and use it for writing even if actual bitflip_count was
dangerously high (bitflip_count > mtd->bitflip_threshold).

This patch fixes this above issue, by returning 'stats' to caller
ecc->read_page() under all scenarios.

Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: eLBC NAND: fix subpage write support

commit f034d87def51f026b735d1e2877e9387011b2ba3 upstream.

As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc
causes a crash if the driver did not register ecc->hwctl or ecc->calculate.
This behavior was introduced in
   commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9
   "mtd: nand: subpage write support for hardware based ECC schemes".

This fixes a crash by emulating subpage write support by padding sub-page data
with 0xff on either sides to make it full page compatible.

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: fix rfkill regression on rt2500pci

commit 616a8394b5df8c88f4dd416f4527439a4e365034 upstream.

As reported by Niels, starting rfkill polling during device probe
(commit e2bc7c5, generally sane change) broke rfkill on rt2500pci
device. I considered that bug as some initalization issue, which
should be fixed on rt2500pci specific code. But after several
attempts (see bug report for details) we fail to find working solution.
Hence I decided to revert to old behaviour on rt2500pci to fix
regression.

Additionally patch also unregister rfkill on device remove instead
of ifconfig down, what was another issue introduced by bad commit.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=73821

Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.")
Bisected-by: Niels <nille0386@googlemail.com>
Reported-and-tested-by: Niels <nille0386@googlemail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: disable TKIP on USB

commit 8edcb0ba0d56f5914eef11eda6db8bfe74eb9ca8 upstream.

On USB we can not get atomically TKIP key. We have to disable support
for TKIP acceleration on USB hardware to avoid bug as showed bellow.

[  860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002
<snip>
[  860.827280] Call Trace:
[  860.827282]  [<ffffffff81682ea6>] dump_stack+0x4d/0x66
[  860.827284]  [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55
[  860.827285]  [<ffffffff81685bb3>] __schedule+0x733/0x7b0
[  860.827287]  [<ffffffff81685c59>] schedule+0x29/0x70
[  860.827289]  [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0
[  860.827291]  [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0
[  860.827294]  [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70
[  860.827296]  [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140
[  860.827298]  [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20
[  860.827301]  [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150
[  860.827303]  [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110
[  860.827305]  [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160  [rt2x00usb]
[  860.827307]  [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb]
[  860.827309]  [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb]
[  860.827311]  [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb]
[  860.827314]  [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50  [rt2800lib]
[  860.827321]  [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0  [mac80211]
[  860.827322]  [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80
[  860.827329]  [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211]

Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com>
Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: fix NULL pointer dereference when there are no strings

commit f0688c8b81d2ea239c3fb0b848f623b579238d99 upstream.

If the descriptors do not need any strings and user space sends empty
set of strings, the ffs->stringtabs field remains NULL.  Thus
*ffs->stringtabs in functionfs_bind leads to a NULL pointer
dereferenece.

The bug was introduced by commit [fd7c9a007f: “use usb_string_ids_n()”].

While at it, remove double initialisation of lang local variable in
that function.

ffs->strings_count does not need to be checked in any way since in
the above scenario it will remain zero and usb_string_ids_n() is
a no-operation when colled with 0 argument.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: fix null deref at port probe

commit aea1ae8760314e072bf1b773521e9de5d5dda10d upstream.

Fix NULL-pointer dereference when probing an interface with no
endpoints.

These devices have two bulk endpoints per interface, but this avoids
crashing the kernel if a user forces a non-FTDI device to be probed.

Note that the iterator variable was made unsigned in order to avoid
a maybe-uninitialized compiler warning for ep_desc after the loop.

Fixes: 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size
calculation")

Reported-by: Mike Remski <mremski@mutualink.net>
Tested-by: Mike Remski <mremski@mutualink.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add/modify Olivetti Olicard modems

commit b0ebef36e93703e59003ad6a1a20227e47714417 upstream.

Adding a couple of Olivetti modems and blacklisting the net
function on a couple which are already supported.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add device ID for SpeedUp SU9800 usb 3g modem

commit 1cab4c68e339086cdaff7535848e878e8f261fca upstream.

Reported by Alif Mubarak Ahmad:

This device vendor and product id is 1c9e:9800
It is working as serial interface with generic usbserial driver.
I thought it is more suitable to use usbserial option driver, which has
better capability distinguishing between modem serial interface and
micro sd storage interface.

[ johan: style changes ]

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Alif Mubarak Ahmad <alive4ever@live.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix runtime suspended xhci from blocking system suspend.

commit d6236f6d1d885aa19d1cd7317346fe795227a3cc upstream.

The system suspend flow as following:
1, Freeze all user processes and kenrel threads.

2, Try to suspend all devices.

2.1, If pci device is in RPM suspended state, then pci driver will try
to resume it to RPM active state in the prepare stage.

2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two
workqueue items to resume usb2&usb3 roothub devices.

2.3, Call suspend callbacks of devices.

2.3.1, All suspend callbacks of all hcd's children, including
roothub devices are called.

2.3.2, Finally, hcd_pci_suspend callback is called.

Due to workqueue threads were already frozen in step 1, the workqueue
items can't be scheduled, and the roothub devices can't be resumed in
this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in
usb_hcd_resume_root_hub won't be cleared. Finally,
hcd_pci_suspend will return -EBUSY, and system suspend fails.

The reason why this issue doesn't show up very often is due to that
choose_wakeup will be called in step 2.3.1. In step 2.3.1, if
udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then
udev will resume to RPM active for changing the wakeup settings. This
has been a lucky hit which hides this issue.

For some special xHCI controllers which have no USB2 port, then roothub
will not match hub driver due to probe failed. Then its
do_remote_wakeup will be set to zero, and we won't be as lucky.

xhci driver doesn't need to resume roothub devices everytime like in
the above case. It's only needed when there are pending event TRBs.

This patch should be back-ported to kernels as old as 3.2, that
contains the commit f69e3120df82391a0ee8118e0a156239a06b2afb
"USB: XHCI: resume root hubs when the controller resumes"

Signed-off-by: Wang, Yu <yu.y.wang@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
[use readl() instead of removed xhci_readl(), reword commit message -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: correct burst count field for isoc transfers on 1.0 xhci hosts

commit 3213b151387df0b95f4eada104f68eb1c1409cb3 upstream.

The transfer burst count (TBC) field in xhci 1.0 hosts should be set
to the number of bursts needed to transfer all packets in a isoc TD.
Supported values are 0-2 (1 to 3 bursts per service interval).

Formula for TBC calculation is given in xhci spec section 4.11.2.3:
TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1

This patch should be applied to stable kernels since 3.0 that contain
the commit 5cd43e33b9519143f06f507dd7cbee6b7a621885
"xhci 1.0: Set transfer burst count field."

Suggested-by: ShiChun Ma <masc2008@qq.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-scsi: fix various bad behavior on aborted requests

commit 8faeb529b2dabb9df691d614dda18910a43d05c9 upstream.

Even though the virtio-scsi spec guarantees that all requests related
to the TMF will have been completed by the time the TMF itself completes,
the request queue's callback might not have run yet.  This causes requests
to be completed more than once, and as a result triggers a variety of
BUGs or oopses.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-scsi: avoid cancelling uninitialized work items

commit cdda0e5acbb78f7b777049f8c27899e5c5bb368f upstream.

Calling the workqueue interface on uninitialized work items isn't a
good idea even if they're zeroed. It's not failing catastrophically only
through happy accidents.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvscsi: Add memory barriers for send / receive

commit 7114aae02742d6b5c5a0d39a41deb61d415d3717 upstream.

Add a memory barrier prior to sending a new command to the VIOS
to ensure the VIOS does not receive stale data in the command buffer.
Also add a memory barrier when processing the CRQ for completed commands.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvscsi: Abort init sequence during error recovery

commit 9ee755974bea2f9880e517ec985dc9dede1b3a36 upstream.

If a CRQ reset is triggered for some reason while in the middle
of performing VSCSI adapter initialization, we don't want to
call the done function for the initialization MAD commands as
this will only result in two threads attempting initialization
at the same time, resulting in failures.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.47

tracing: Fix syscall_*regfunc() vs copy_process() race

commit 4af4206be2bd1933cae20c2b6fb2058dbc887f7c upstream.

syscall_regfunc() and syscall_unregfunc() should set/clear
TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race
with copy_process() and miss the new child which was not added to
the process/thread lists yet.

Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT
under tasklist.

Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com
Fixes: a871bd33a6c0 "tracing: Add syscall tracepoints"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Try again for saved cmdline if failed due to locking

commit 379cfdac37923653c9d4242d10052378b7563005 upstream.

In order to prevent the saved cmdline cache from being filled when
tracing is not active, the comms are only recorded after a trace event
is recorded.

The problem is, a comm can fail to be recorded if the trace_cmdline_lock
is held. That lock is taken via a trylock to allow it to happen from
any context (including NMI). If the lock fails to be taken, the comm
is skipped. No big deal, as we will try again later.

But! Because of the code that was added to only record after an event,
we may not try again later as the recording is made as a oneshot per
event per CPU.

Only disable the recording of the comm if the comm is actually recorded.

Fixes: 7ffbd48d5cab "tracing: Cache comms only after an event occurred"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/SubmittingPatches: describe the Fixes: tag

commit 8401aa1f59975c03eeebd3ac6d264cbdfe9af5de upstream.

Update the SubmittingPatches process to include howto about the new
'Fixes:' tag to be used when a patch fixes an issue in a previous commit
(found by git-bisect for example).

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipt_ULOG: fix info leaks

commit 278f2b3e2af5f32ea1afe34fa12a2518153e6e49 upstream.

The ulog messages leak heap bytes by the means of padding bytes and
incompletely filled string arrays. Fix those by memset(0)'ing the
whole struct before filling it.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jan Tore Morken <jantore@morken.priv.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: max77693: Fix two NULL pointer exceptions on missing pdata

commit d5653f2b7304f05eeb45d84f123cf02f840b8537 upstream.

Fix NULL pointer exceptions when platform data is not supplied.

Trace of one exception:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.14.0-12045-gead5dd4687a6-dirty #1628
task: eea80000 ti: eea88000 task.ti: eea88000
PC is at max77693_muic_probe+0x27c/0x528
LR is at regmap_write+0x50/0x60
pc : [<c041d1c8>]    lr : [<c02eba60>]    psr: 20000113
sp : eea89e38  ip : 00000000  fp : c098a834
r10: ee1a5a10  r9 : 00000005  r8 : c098a83c
r7 : 0000000a  r6 : c098a774  r5 : 00000005  r4 : eeb006d0
r3 : c0697bd8  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 4000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xeea88240)
Stack: (0xeea89e38 to 0xeea8a000)
9e20:                                                       c08499fc eeb006d0
9e40: 00000000 00000000 c0915f98 00000001 00000000 ee1a5a10 c098a730 c09a88b8
9e60: 00000000 c098a730 c0915f98 00000000 00000000 c02d6aa0 c02d6a88 ee1a5a10
9e80: c0a712c8 c02d54e4 00001204 c0628b00 ee1a5a10 c098a730 ee1a5a44 00000000
9ea0: eea88000 c02d57b4 00000000 c098a730 c02d5728 c02d3a24 ee813e5c eeb9d534
9ec0: c098a730 ee22f700 c097c720 c02d4b14 c08174ec c098a730 00000006 c098a730
9ee0: 00000006 c092fd30 c09b8500 c02d5df8 00000000 c093cbb8 00000006 c0008928
9f00: 000000c3 ef7fc785 00000000 ef7fc794 00000000 c08af968 00000072 eea89f30
9f20: ef7fc85e c065f198 000000c3 c003e87c 00000003 00000000 c092fd3c 00000000
9f40: c08af618 c0826d58 00000006 00000006 c0956f58 c093cbb8 00000006 c092fd30
9f60: c09b8500 000000c3 c092fd3c c08e8510 00000000 c08e8bb0 00000006 00000006
9f80: c08e8510 c0c0c0c0 00000000 c0628fac 00000000 00000000 00000000 00000000
9fa0: 00000000 c0628fb4 00000000 c000f038 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c041d1c8>] (max77693_muic_probe) from [<c02d6aa0>] (platform_drv_probe+0x18/0x48)
[<c02d6aa0>] (platform_drv_probe) from [<c02d54e4>] (driver_probe_device+0x140/0x384)
[<c02d54e4>] (driver_probe_device) from [<c02d57b4>] (__driver_attach+0x8c/0x90)
[<c02d57b4>] (__driver_attach) from [<c02d3a24>] (bus_for_each_dev+0x54/0x88)
[<c02d3a24>] (bus_for_each_dev) from [<c02d4b14>] (bus_add_driver+0xe8/0x204)
[<c02d4b14>] (bus_add_driver) from [<c02d5df8>] (driver_register+0x78/0xf4)
[<c02d5df8>] (driver_register) from [<c0008928>] (do_one_initcall+0xc4/0x174)
[<c0008928>] (do_one_initcall) from [<c08e8bb0>] (kernel_init_freeable+0xfc/0x1c8)
[<c08e8bb0>] (kernel_init_freeable) from [<c0628fb4>] (kernel_init+0x8/0xec)
[<c0628fb4>] (kernel_init) from [<c000f038>] (ret_from_fork+0x14/0x3c)
Code: caffffe7 e59d200c e3550001 b3a05001 (e5923008)
---[ end trace 85db969ce011bde7 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 190d7cfc8632
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix hw ready reset flow

commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream.

We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY
while cleared and not while  ME_RDY is set. The spurious interrupt
is not delivered on all platforms in this case the
driver may fail to initialize.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: read H_CSR after asserting reset

commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream.

According the spec the host should read H_CSR again
after asserting reset H_RST to ensure that reset was
read by the firmware

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptrace,x86: force IRET path after a ptrace_stop()

commit b9cd18de4db3c9ffa7e17b0dc0ca99ed5aa4d43a upstream.

The 'sysret' fastpath does not correctly restore even all regular
registers, much less any segment registers or reflags values.  That is
very much part of why it's faster than 'iret'.

Normally that isn't a problem, because the normal ptrace() interface
catches the process using the signal handler infrastructure, which
always returns with an iret.

However, some paths can get caught using ptrace_event() instead of the
signal path, and for those we need to make sure that we aren't going to
return to user space using 'sysret'.  Otherwise the modifications that
may have been done to the register set by the tracer wouldn't
necessarily take effect.

Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from
arch_ptrace_stop_needed() which is invoked from ptrace_stop().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: Fix panic due to non-linear skb

commit f44a5f45f544561302e855e7bd104e5f506ec01b upstream.

Receiving a ICMP response to an IPIP packet in a non-linear skb could
cause a kernel panic in __skb_pull.

The problem was introduced in
commit f2edb9f7706dcb2c0d9a362b2ba849efe3a97f5e ("ipvs: implement
passive PMTUD for IPIP packets").

Signed-off-by: Peter Christensen <pch@ordbogen.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Fix memory leak on VCPU

commit 8c9eb041cf76038eb3b62ee259607eec9b89f48d upstream.

kvm_arch_vcpu_free() is called in 2 code paths:

1) kvm_vm_ioctl()
       kvm_vm_ioctl_create_vcpu()
           kvm_arch_vcpu_destroy()
               kvm_arch_vcpu_free()
2) kvm_put_kvm()
       kvm_destroy_vm()
           kvm_arch_destroy_vm()
               kvm_mips_free_vcpus()
                   kvm_arch_vcpu_free()

Neither of the paths handles VCPU free. We need to do it in
kvm_arch_vcpu_free() corresponding to the memory allocation in
kvm_arch_vcpu_create().

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Remove redundant NULL checks before kfree()

commit c6c0a6637f9da54f9472144d44f71cf847f92e20 upstream.

The kfree() function already NULL checks the parameter so remove the
redundant NULL checks before kfree() calls in arch/mips/kvm/.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: call truncate_setsize under tailpack mutex

commit 22e7478ddbcb670e33fab72d0bbe7c394c3a2c84 upstream.

Prior to commit 0e4f6a791b1e (Fix reiserfs_file_release()), reiserfs
truncates serialized on i_mutex. They mostly still do, with the exception
of reiserfs_file_release. That blocks out other writers via the tailpack
mutex and the inode openers counter adjusted in reiserfs_file_open.

However, NFS will call reiserfs_setattr without having called ->open, so
we end up with a race when nfs is calling ->setattr while another
process is releasing the file. Ultimately, it triggers the
BUG_ON(inode->i_size != new_file_size) check in maybe_indirect_to_direct.

The solution is to pull the lock into reiserfs_setattr to encompass the
truncate_setsize call as well.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Add AT_HWCAP2 to indicate V.CRYPTO category support

commit dd58a092c4202f2bd490adab7285b3ff77f8e467 upstream.

The Vector Crypto category instructions are supported by current POWER8
chips, advertise them to userspace using a specific bit to properly
differentiate with chips of the same architecture level that might not
have them.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix typo 'CONFIG_PPC_CPU'

commit b69a1da94f3d1589d1942b5d1b384d8cfaac4500 upstream.

Commit cd64d1697cf0 ("powerpc: mtmsrd not defined") added a check for
CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended.

Fixes: cd64d1697cf0 ("powerpc: mtmsrd not defined")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix typo 'CONFIG_PMAC'

commit 6e0fdf9af216887e0032c19d276889aad41cad00 upstream.

Commit b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling
perf_event_do_pending") added a check for CONFIG_PMAC were a check for
CONFIG_PPC_PMAC was clearly intended.

Fixes: b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: 64bit sendfile is capped at 2GB

commit 5d73320a96fcce80286f1447864c481b5f0b96fa upstream.

commit 8f9c0119d7ba (compat: fs: Generic compat_sys_sendfile
implementation) changed the PowerPC 64bit sendfile call from
sys_sendile64 to sys_sendfile.

Unfortunately this broke sendfile of lengths greater than 2G because
sys_sendfile caps at MAX_NON_LFS. Restore what we had previously which
fixes the bug.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix overwritten PE state

commit 54f112a3837d4e7532bbedbbbf27c0de277be510 upstream.

In pseries_eeh_get_state(), EEH_STATE_UNAVAILABLE is always
overwritten by EEH_STATE_NOT_SUPPORT because of the missed
"break" there. The patch fixes the issue.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entry

commit 1b19453d1c6abcfa7c312ba6c9f11a277568fc94 upstream.

Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.

Fix the DRC cache pruner to just ignore RC_INPROG entries.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: don't try to reuse an expired DRC entry off the list

commit a0ef5e19684f0447da9ff0654a12019c484f57ca upstream.

Currently when we are processing a request, we try to scrape an expired
or over-limit entry off the list in preference to allocating a new one
from the slab.

This is unnecessarily complicated. Just use the slab layer.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Don't declare inode uptodate unless all attributes were checked

commit 43b6535e717d2f656f71d9bd16022136b781c934 upstream.

Fix a bug, whereby nfs_update_inode() was declaring the inode to be
up to date despite not having checked all the attributes.
The bug occurs because the temporary variable in which we cache
the validity information is 'sanitised' before reapplying to
nfsi->cache_validity.

Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: getattr for FATTR4_WORD0_FILES_AVAIL needs the statfs buffer

commit 12337901d654415d9f764b5f5ba50052e9700f37 upstream.

Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix FREE_STATEID lockowner leak

commit 48385408b45523d9a432c66292d47ef43efcbb94 upstream.

27b11428b7de ("nfsd4: remove lockowner when removing lock stateid")
introduced a memory leak.

Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS: Handle allocation errors correctly in filelayout_alloc_layout_hdr()

commit 6df200f5d5191bdde4d2e408215383890f956781 upstream.

Return the NULL pointer when the allocation fails.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix a module reference leak in svc_handle_xprt

commit c789102c20bbbdda6831a273e046715be9d6af79 upstream.

If the accept() call fails, we need to put the module reference.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/umad: Fix use-after-free on close

commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream.

Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n>
triggers a use-after-free.  __fput() invokes f_op->release() before it
invokes cdev_put().  Make sure that the ib_umad_device structure is
freed by the cdev_put() call instead of f_op->release().  This avoids
that changing the port mode from IB into Ethernet and back to IB
followed by restarting opensmd triggers the following kernel oops:

    general protection fault: 0000 [#1] PREEMPT SMP
    RIP: 0010:[<ffffffff810cc65c>]  [<ffffffff810cc65c>] module_put+0x2c/0x170
    Call Trace:
     [<ffffffff81190f20>] cdev_put+0x20/0x30
     [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0
     [<ffffffff8118e35e>] ____fput+0xe/0x10
     [<ffffffff810723bc>] task_work_run+0xac/0xe0
     [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0
     [<ffffffff814b8398>] int_signal+0x12/0x17

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/umad: Fix error handling

commit 8ec0a0e6b58218bdc1db91dd70ebfcd6ad8dd6cd upstream.

Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL
or if nonseekable_open() fails.

Avoid leaking a kref count, that sm_sem is kept down and also that the
IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if
nonseekable_open() fails.

Since container_of() never returns NULL, remove the code that tests
whether container_of() returns NULL.

Moving the kref_get() call from the start of ib_umad_*open() to the
end is safe since it is the responsibility of the caller of these
functions to ensure that the cdev pointer remains valid until at least
when these functions return.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
[ydroneaud@opteya.com: rework a bit to reduce the amount of code changed]

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
[ nonseekable_open() can't actually fail, but....  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/srp: Fix a sporadic crash triggered by cable pulling

commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec upstream.

Avoid that the loops that iterate over the request ring can encounter
a pointer to a SCSI command in req->scmnd that is no longer associated
with that request. If the function srp_unmap_data() is invoked twice
for a SCSI command that is not in flight then that would cause
ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument,
resulting in a kernel oops.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipath: Translate legacy diagpkt into newer extended diagpkt

commit 7e6d3e5c70f13874fb06e6b67696ed90ce79bd48 upstream.

This patch addresses an issue where the legacy diagpacket is sent in
from the user, but the driver operates on only the extended
diagpkt. This patch specifically initializes the extended diagpkt
based on the legacy packet.

Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/qib: Fix port in pkey change event

commit 911eccd284d13d78c92ec4f1f1092c03457d732a upstream.

The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE.

As of the dual port qib QDR card, this is not necessarily correct.

Change to use the port as specified in the call.

Reported-by: Alex Estrin <alex.estrin@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: ath79_wdt: avoid spurious restarts on AR934x

commit 23afeb613ec0e10aecfae7838a14d485db62ac52 upstream.

On some AR934x based systems, where the frequency of
the AHB bus is relatively high, the built-in watchdog
causes a spurious restart when it gets enabled.

The possible cause of these restarts is that the timeout
value written into the TIMER register does not reaches
the hardware in time.

Add an explicit delay into the ath79_wdt_enable function
to avoid the spurious restarts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()

commit 938626d96a3ffb9eb54552bb0d3a4f2b30ffdeb0 upstream.

Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.

Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: Remove incorrect assertion in shrink_tnc()

commit 72abc8f4b4e8574318189886de627a2bfe6cd0da upstream.

I hit the same assert failed as Dolev Raviv reported in Kernel v3.10
shows like this:

[ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297)
[ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G           O 3.10.40 #1
[ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24)
[ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28)
[ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs])
[ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs])
[ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8)
[ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544)
[ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398)
[ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8)
[ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238)
[ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c)
[ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188)
[ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs])
[ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs])
[ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418)
[ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530)
[ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54)
[ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184)
[ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac)
[ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0)
[ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40)

After analyzing the code, I found a condition that may cause this failed
in correct operations. Thus, I think this assertion is wrong and should be
removed.

Suppose there are two clean znodes and one dirty znode in TNC. So the
per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode
is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops
on this znode. We clear COW bit and DIRTY bit in write_index() without
@tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the
comments in write_index() shows, if another process hold @tnc_mutex and
dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1).
We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in
free_obsolete_znodes() to keep it right.

If shrink_tnc() performs between decrease and increase, it will release
other 2 clean znodes it holds and found @clean_zn_cnt is less than zero
(1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will
soon correct @clean_zn_cnt and no harm to fs in this case, I think this
assertion could be removed.

2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2

Thread A (commit)         Thread B (write or others)       Thread C (shrinker)
->write_index
   ->clear_bit(DIRTY_NODE)
   ->clear_bit(COW_ZNODE)

            @clean_zn_cnt == 2
                          ->mutex_locked(&tnc_mutex)
                          ->dirty_cow_znode
                              ->!ubifs_zn_cow(znode)
                              ->!test_and_set_bit(DIRTY_NODE)
                              ->atomic_dec(&clean_zn_cnt)
                          ->mutex_unlocked(&tnc_mutex)

            @clean_zn_cnt == 1
                                                           ->mutex_locked(&tnc_mutex)
                                                           ->shrink_tnc
                                                             ->destroy_tnc_subtree
                                                             ->atomic_sub(&clean_zn_cnt, 2)
                                                             ->ubifs_assert  <- hit
                                                           ->mutex_unlocked(&tnc_mutex)

            @clean_zn_cnt == -1
->mutex_lock(&tnc_mutex)
->free_obsolete_znodes
   ->atomic_inc(&clean_zn_cnt)
->mutux_unlock(&tnc_mutex)

            @clean_zn_cnt == 0 (correct after shrink)

Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: fix an mmap and fsync race condition

commit 691a7c6f28ac90cccd0dbcf81348ea90b211bdd0 upstream.

There is a race condition in UBIFS:

Thread A (mmap)                        Thread B (fsync)

->__do_fault                           ->write_cache_pages
   -> ubifs_vm_page_mkwrite
       -> budget_space
       -> lock_page
       -> release/convert_page_budget
       -> SetPagePrivate
       -> TestSetPageDirty
       -> unlock_page
                                       -> lock_page
                                           -> TestClearPageDirty
                                           -> ubifs_writepage
                                               -> do_writepage
                                                   -> release_budget
                                                   -> ClearPagePrivate
                                                   -> unlock_page
   -> !(ret & VM_FAULT_LOCKED)
   -> lock_page
   -> set_page_dirty
       -> ubifs_set_page_dirty
           -> TestSetPageDirty (set page dirty without budgeting)
   -> unlock_page

This leads to situation where we have a diry page but no budget allocated for
this page, so further write-back may fail with -ENOSPC.

In this fix we return from page_mkwrite without performing unlock_page. We
return VM_FAULT_LOCKED instead. After doing this, the race above will not
happen.

Signed-off-by: hujianyang <hujianyang@huawei.com>
Tested-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region

commit ab6c15bc6620ebe220970cc040b29bcb2757f373 upstream.

Previously, the lower limit for the MIPS SC initialization loop was
set incorrectly allowing one extra loop leading to writes
beyond the MSC ioremap'd space. More precisely, the value of the 'imp'
in the last loop increased beyond the msc_irqmap_t boundaries and
as a result of which, the 'n' variable was loaded with an incorrect
value. This value was used later on to calculate the offset in the
MSC01_IC_SUP which led to random crashes like the following one:

CPU 0 Unable to handle kernel paging request at virtual address e75c0200,
epc == 8058dba4, ra == 8058db90
[...]
Call Trace:
[<8058dba4>] init_msc_irqs+0x104/0x154
[<8058b5bc>] arch_init_irq+0xd8/0x154
[<805897b0>] start_kernel+0x220/0x36c

Kernel panic - not syncing: Attempted to kill the idle task!

This patch fixes the problem

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7118/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

recordmcount/MIPS: Fix possible incorrect mcount_loc table entries in modules

commit 91ad11d7cc6f4472ebf177a6252fbf0fd100d798 upstream.

On MIPS calls to _mcount in modules generate 2 instructions to load
the _mcount address (and therefore 2 relocations). The mcount_loc
table should only reference the first of these, so the second is
filtered out by checking the relocation offset and ignoring ones that
immediately follow the previous one seen.

However if a module has an _mcount call at offset 0, the second
relocation would not be filtered out due to old_r_offset == 0
being taken to mean that the current relocation is the first one
seen, and both would end up in the mcount_loc table.

This results in ftrace_make_nop() patching both (adjacent)
instructions to branches over the _mcount call sequence like so:

  0xffffffffc08a8000:  04 00 00 10     b       0xffffffffc08a8014
  0xffffffffc08a8004:  04 00 00 10     b       0xffffffffc08a8018
  0xffffffffc08a8008:  2d 08 e0 03     move    at,ra
  ...

The second branch is in the delay slot of the first, which is
defined to be unpredictable - on the platform on which this bug was
encountered, it triggers a reserved instruction exception.

Fix by initializing old_r_offset to ~0 and using that instead of 0
to determine whether the current relocation is the first seen.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7098/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtip32xx: Remove dfs_parent after pci unregister

commit af5ded8ccf21627f9614afc03b356712666ed225 upstream.

In module exit, dfs_parent and it's subtree were removed before
unregistering with pci. When debugfs entry for each device is attempted
to remove in pci_remove() context, they don't exist, as dfs_parent and
its children were already ripped apart.

Modified to first unregister with pci and then remove dfs_parent.

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtip32xx: Increase timeout for STANDBY IMMEDIATE command

commit 670a641420a3d9586eebe7429dfeec4e7ed447aa upstream.

Increased timeout for STANDBY IMMEDIATE command to 2 minutes.

Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtip32xx: Fix ERO and NoSnoop values in PCIe upstream on AMD systems

commit d1e714db8129a1d3670e449b87719c78e2c76f9f upstream.

A hardware quirk in P320h/P420m interfere with PCIe transactions on some
AMD chipsets, making P320h/P420m unusable. This workaround is to disable
ERO and NoSnoop bits in the parent and root complex for normal
functioning of these devices

NOTE: This workaround is specific to AMD chipset with a PCIe upstream
device with device id 0x5aXX

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix incorrect vgaarb conditional in WARN_ON()

commit 67ebd8140dc8923c65451fa0f6a8eee003c4dcd3 upstream.

3448a19da479 "vgaarb: use bridges to control VGA routing where possible"
added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing
WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the
condition is never true.  Replace with logical AND.

Found by Coverity (CID 142811).

Fixes: 3448a19da479 "vgaarb: use bridges to control VGA routing where possible"
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add new ID for Intel GPU "spurious interrupt" quirk

commit 7c82126a94e69bbbac586f0249e7ef11e681246c upstream.

After a CPU upgrade while keeping the same mainboard, we faced "spurious
interrupt" problems again.

It turned out that the new CPU also featured a new GPU with a different PCI
ID.

Add this PCI ID to the quirk table.  Probably all other Intel GPU PCI IDs
are affected, too, but I don't want to add them without a test system.

See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") for some history.

[bhelgaas: add f67fd55fa96f reference, stable tag]
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set

commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream.

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.

Reported-and-tested-by: James Lademann <jwlademann@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - deal with clickpads reporting right button events

commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream.

At least the Dell Vostro 5470 elantech *clickpad* reports right button
clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally
no matter where the user clicks on the pad the pad always reports a left
button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom
corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still
want to report it as such to userspace, so that things like finger movement
in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click
on elantech clickpads. As an added advantage this is something which we can
simply do on all elantech clickpads, so no need to add special quirks for
this weird model.

Reported-and-tested-by: Elder Marco <eldermarco@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Explicily clear login response PDU in exception path

commit 683497566d48f86e04d026de1ee658dd74fc1077 upstream.

This patch adds a explicit memset to the login response PDU
exception path in iscsit_tx_login_rsp().

This addresses a regression bug introduced in commit baa4d64b
where the initiator would end up not receiving the login
response and associated status class + detail, before closing
the login connection.

Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Avoid rejecting incorrect ITT for Data-Out

commit 97c99b47ac58bacb7c09e1f47d5d184434f6b06a upstream.

This patch changes iscsit_check_dataout_hdr() to dump the incoming
Data-Out payload when the received ITT is not associated with a
WRITE, instead of calling iscsit_reject_cmd() for the non WRITE
ITT descriptor.

This addresses a bug where an initiator sending an Data-Out for
an ITT associated with a READ would end up generating a reject
for the READ, eventually resulting in list corruption.

Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix left-over se_lun->lun_sep pointer OOPs

commit 83ff42fcce070801a3aa1cd6a3269d7426271a8d upstream.

This patch fixes a left-over se_lun->lun_sep pointer OOPs when one
of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua*
attributes is accessed after the $DEVICE symlink has been removed.

To address this bug, go ahead and clear se_lun->lun_sep memory in
core_dev_unexport(), so that the existing checks for show/store
ALUA attributes in target_core_fabric_configfs.c work as expected.

Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.46

iscsi-target: Re-add chunk from backport of upstream 79d59d08082d to 3.10

Commit d5c55fa31a29, the backport of upstream 79d59d08082d
("iscsi-target: Fix wrong buffer / buffer overrun in
iscsi_change_param_value()") left out applying one chunk of the fix in
iscsi_login_non_zero_tsih_s2().  Add the missing chunk.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)

commit 554086d85e71f30abe46fc014fea31929a7c6a8a upstream.

The bad syscall nr paths are their own incomprehensible route
through the entry control flow.  Rearrange them to work just like
syscalls that return -ENOSYS.

This fixes an OOPS in the audit code when fast-path auditing is
enabled and sysenter gets a bad syscall nr (CVE-2014-4508).

This has probably been broken since Linux 2.6.27:
af0575bba0 i386 syscall audit fast-path

Cc: Roland McGrath <roland@redhat.com>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Target/iser: Wait for proper cleanup before unloading

commit f5ebec9629cf78eeeea4b8258882a9f439ab2404 upstream.

disconnected_handler works are scheduled on system_wq.
When attempting to unload, first make sure all works
have cleaned up.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Target/iser: Improve cm events handling

commit 88c4015fda6d014392f76d3b1688347950d7a12d upstream.

There are 4 RDMA_CM events that all basically mean that
the user should teardown the IB connection:
- DISCONNECTED
- ADDR_CHANGE
- DEVICE_REMOVAL
- TIMEWAIT_EXIT

Only in DISCONNECTED/ADDR_CHANGE it makes sense to
call rdma_disconnect (send DREQ/DREP to our initiator).
So we keep the same teardown handler for all of them
but only indicate calling rdma_disconnect for the relevant
events.

This patch also removes redundant debug prints for each single
event.

v2 changes:
 - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag)

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbtest: Add timetout to simple_io()

commit e5e4746510d140261918aecce2e5e3aa4456f7e9 upstream.

Without a timetout some tests e.g. test_halt() can remain stuck forever.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix use of uninit "ret" in end_extent_writepage()

commit 3e2426bd0eb980648449e7a2f5a23e3cd3c7725c upstream.

If this condition in end_extent_writepage() is false:

if (tree->ops && tree->ops->writepage_end_io_hook)

we will then test an uninitialized "ret" at:

ret = ret < 0 ? ret : -EIO;

The test for ret is for the case where ->writepage_end_io_hook
failed, and we'd choose that ret as the error; but if
there is no ->writepage_end_io_hook, nothing sets ret.

Initializing ret to 0 should be sufficient; if
writepage_end_io_hook wasn't set, (!uptodate) means
non-zero err was passed in, so we choose -EIO in that case.

Signed-of-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix scrub_print_warning to handle skinny metadata extents

commit 6eda71d0c030af0fc2f68aaa676e6d445600855b upstream.

The skinny extents are intepreted incorrectly in scrub_print_warning(),
and end up hitting the BUG() in btrfs_extent_inline_ref_size.

Reported-by: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: use right type to get real comparison

commit cd857dd6bc2ae9ecea14e75a34e8a8fdc158e307 upstream.

We want to make sure the point is still within the extent item, not to verify
the memory it's pointing to.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: btrfs: volumes.c: Fix for possible null pointer dereference

commit 8321cf2596d283821acc466377c2b85bcd3422b7 upstream.

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: send, don't error in the presence of subvols/snapshots

commit 1af56070e3ef9477dbc7eba3b9ad7446979c7974 upstream.

If we are doing an incremental send and the base snapshot has a
directory with name X that doesn't exist anymore in the second
snapshot and a new subvolume/snapshot exists in the second snapshot
that has the same name as the directory (name X), the incremental
send would fail with -ENOENT error. This is because it attempts
to lookup for an inode with a number matching the objectid of a
root, which doesn't exist.

Steps to reproduce:

    mkfs.btrfs -f /dev/sdd
    mount /dev/sdd /mnt

    mkdir /mnt/testdir
    btrfs subvolume snapshot -r /mnt /mnt/mysnap1

    rmdir /mnt/testdir
    btrfs subvolume create /mnt/testdir
    btrfs subvolume snapshot -r /mnt /mnt/mysnap2

    btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data

A test case for xfstests follows.

Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: set right total device count for seeding support

commit 298658414a2f0bea1f05a81876a45c1cd96aa2e0 upstream.

Seeding device support allows us to create a new filesystem
based on existed filesystem.

However newly created filesystem's @total_devices should include seed
devices. This patch fix the following problem:

 # mkfs.btrfs -f /dev/sdb
 # btrfstune -S 1 /dev/sdb
 # mount /dev/sdb /mnt
 # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1
 # umount /mnt
 # mount /dev/sdc /mnt               --->fs_devices->total_devices = 2

This is because we record right @total_devices in superblock, but
@fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout().

Fix this problem by not resetting @fs_devices->total_devices.

Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: mark mapping with error flag to report errors to userspace

commit 5dca6eea91653e9949ce6eb9e9acab6277e2f2c4 upstream.

According to commit 865ffef3797da2cac85b3354b5b6050dc9660978
(fs: fix fsync() error reporting),
it's not stable to just check error pages because pages can be
truncated or invalidated, we should also mark mapping with error
flag so that a later fsync can catch the error.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: make sure there are not any read requests before stopping workers

commit de348ee022175401e77d7662b7ca6e231a94e3fd upstream.

In close_ctree(), after we have stopped all workers,there maybe still
some read requests(for example readahead) to submit and this *maybe* trigger
an oops that user reported before:

kernel BUG at fs/btrfs/async-thread.c:619!

By hacking codes, i can reproduce this problem with one cpu available.
We fix this potential problem by invalidating all btree inode pages before
stopping all workers.

Thanks to Miao for pointing out this problem.

Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: output warning instead of error when loading free space cache failed

commit 32d6b47fe6fc1714d5f1bba1b9f38e0ab0ad58a8 upstream.

If we fail to load a free space cache, we can rebuild it from the extent tree,
so it is not a serious error, we should not output a error message that
would make the users uncomfortable. This patch uses warning message instead
of it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Add ctime/mtime update for btrfs device add/remove.

commit 5a1972bd9fd4b2fb1bac8b7a0b636d633d8717e3 upstream.

Btrfs will send uevent to udev inform the device change,
but ctime/mtime for the block device inode is not udpated, which cause
libblkid used by btrfs-progs unable to detect device change and use old
cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an
error message.

Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Cc: Karel Zak <kzak@redhat.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix double free in find_lock_delalloc_range

commit 7d78874273463a784759916fc3e0b4e2eb141c70 upstream.

We need to NULL the cached_state after freeing it, otherwise
we might free it again if find_delalloc_range doesn't find anything.

Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: skb_segment: orphan frags before copying

commit 1fd819ecb90cc9b822cd84d3056ddba315d3340f upstream.

skb_segment copies frags around, so we need
to copy them carefully to avoid accessing
user memory after reporting completion to userspace
through a callback.

skb_segment doesn't normally happen on datapath:
TSO needs to be disabled - so disabling zero copy
in this case does not look like a big deal.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2.  As skb_segment() only supports page-frags *or* a
  frag list, there is no need for the additional frag_skb pointer or the
  preparatory renaming.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Eddie Chapman <eddie@ehuk.net> # backported to 3.10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: fix kernel memory disclosure in io_getevents() introduced in v3.10

commit edfbbf388f293d70bf4b7c0bc38774d05e6f711a upstream.

A kernel memory disclosure was introduced in aio_read_events_ring() in v3.10
by commit a31ad380bed817aa25f8830ad23e1a0480fef797.  The changes made to
aio_read_events_ring() failed to correctly limit the index into
ctx->ring_pages[], allowing an attacked to cause the subsequent kmap() of
an arbitrary page with a copy_to_user() to copy the contents into userspace.
This vulnerability has been assigned CVE-2014-0206.  Thanks to Mateusz and
Petr for disclosing this issue.

This patch applies to v3.12+.  A separate backport is needed for 3.10/3.11.

[jmoyer@redhat.com: backported to 3.10]
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: fix aio request leak when events are reaped by userspace

commit f8567a3845ac05bb28f3c1b478ef752762bd39ef upstream.

The aio cleanups and optimizations by kmo that were merged into the 3.10
tree added a regression for userspace event reaping.  Specifically, the
reference counts are not decremented if the event is reaped in userspace,
leading to the application being unable to submit further aio requests.
This patch applies to 3.12+.  A separate backport is required for 3.10/3.11.
This issue was uncovered as part of CVE-2014-0206.

[jmoyer@redhat.com: backported to 3.10]
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq: Sanitize spurious interrupt detection of threaded irqs

commit 1e77d0a1ed7417d2a5a52a7b8d32aea1833faa6c upstream.

Till reported that the spurious interrupt detection of threaded
interrupts is broken in two ways:

- note_interrupt() is called for each action thread of a shared
  interrupt line. That's wrong as we are only interested whether none
  of the device drivers felt responsible for the interrupt, but by
  calling multiple times for a single interrupt line we account
  IRQ_NONE even if one of the drivers felt responsible.

- note_interrupt() when called from the thread handler is not
  serialized. That leaves the members of irq_desc which are used for
  the spurious detection unprotected.

To solve this we need to defer the spurious detection of a threaded
interrupt to the next hardware interrupt context where we have
implicit serialization.

If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we
check whether the previous interrupt requested a deferred check. If
not, we request a deferred check for the next hardware interrupt and
return.

If set, we check whether one of the interrupt threads signaled
success. Depending on this information we feed the result into the
spurious detector.

If one primary handler of a shared interrupt returns IRQ_HANDLED we
disable the deferred check of irq threads on the same line, as we have
found at least one device driver who cared.

Reported-by: Till Straumann <strauman@slac.stanford.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Austin Schuh <austin@peloton-tech.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, x32: Use compat shims for io_{setup,submit}

commit 7fd44dacdd803c0bbf38bf478d51d280902bb0f1 upstream.

The io_setup takes a pointer to a context id of type aio_context_t.
This in turn is typed to a __kernel_ulong_t.  We could tweak the
exported headers to define this as a 64bit quantity for specific
ABIs, but since we already have a 32bit compat shim for the x86 ABI,
let's just re-use that logic.  The libaio package is also written to
expect this as a pointer type, so a compat shim would simplify that.

The io_submit func operates on an array of pointers to iocb structs.
Padding out the array to be 64bit aligned is a huge pain, so convert
it over to the existing compat shim too.

We don't convert io_getevents to the compat func as its only purpose
is to handle the timespec struct, and the x32 ABI uses 64bit times.

With this change, the libaio package can now pass its testsuite when
built for the x32 ABI.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Link: http://lkml.kernel.org/r/1399250595-5005-1-git-send-email-vapier@gentoo.org
Cc: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-32, espfix: Remove filter for espfix32 due to race

commit 246f2d2ee1d715e1077fc47d61c394569c8ee692 upstream.

It is not safe to use LAR to filter when to go down the espfix path,
because the LDT is per-process (rather than per-thread) and another
thread might change the descriptors behind our back.  Fortunately it
is always *safe* (if a bit slow) to go down the espfix path, and a
32-bit LDT stack segment is extremely rare.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Explicitly clear ramdisk_mcp backend pages

[Note that a different patch to address the same issue went in during
v3.15-rc1 (commit 4442dc8a), but includes a bunch of other changes that
don't strictly apply to fixing the bug]

This patch changes rd_allocate_sgl_table() to explicitly clear
ramdisk_mcp backend memory pages by passing __GFP_ZERO into
alloc_pages().

This addresses a potential security issue where reading from a
ramdisk_mcp could return sensitive information, and follows what
>= v3.15 does to explicitly clear ramdisk_mcp memory at backend
device initialization time.

Reported-by: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt>
Cc: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Report correct response length for some commands

commit 2426bd456a61407388b6e61fc5f98dbcbebc50e2 upstream.

When an initiator sends an allocation length bigger than what its
command consumes, the target should only return the actual response data
and set the residual length to the unused part of the allocation length.

Add a helper function that command handlers (INQUIRY, READ CAPACITY,
etc) can use to do this correctly, and use this code to get the correct
residual for commands that don't use the full initiator allocation in the
handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and
REPORT LUNS.

This addresses a handful of failures as reported by Christophe with
the Windows Certification Kit:

  http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515

Signed-off-by: Roland Dreier <roland@purestorage.com>
Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>