[SCSI] scsi: lpfc error path fix

Add kmalloc failure check and fix the loop on error path. Without the
patch pool element at index [0] will not be freed.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aacraid: Product List Update

Update drivers/scsi/aacraid/linit.c and Documentation/scsi/aacraid.txt
file with the current list of
adapters supported by the aacraid driver. Deprecated a few adapters that
never shipped, corrected a
few and added new adapters that matched the family code support. No
functional changes to the driver.
No side effects.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] libiscsi: fix senselen calculation

Yanling Qi, noted that when the sense data length of
a check-condition is greater than 0x7f (127), senselen = (data[0] << 8)
| data[1] will become negative. It causes different kinds of panics from
GPF, spin_lock deadlock to spin_lock recursion.

We were also swapping this value on big endien machines.

This patch fixes both issues by using be16_to_cpu().

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] iscsi: simplify IPv6 and IPv4 address printing

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] iscsi: newline in printk

This patch cures two run together printk messages in iSCSI
driver.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] iscsi: fix crypto_alloc_hash() error check

The return value of crypto_alloc_hash() should be checked by
IS_ERR().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] iscsi: fix 2.6.19 data digest calculation bug

The transition from crypto_digest_*() to  the crypto_hash_*() family
introduced a bug into the data digest calculation: crypto_hash_update() is
called with the number of S/G elements instead of the S/G lists data size.

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] scsi_scan: fix report lun problems with CDROM or RBC devices

Apparently no ATAPI CD/DVD actually supports REPORT LUNS (in spite of
claiming scsi-3 compliance, where it's mandatory) and worse, some
crash or flake out on being sent the command.  This may actually be
due to a conflict between SPC and MMC with MMC not listing REPORT LUNS
as mandatory.  The same standards conflict exists for RBC as well.

Fix all of this by reversing the blacklists for CDROM and RBC devices
(i.e. now they have to have the BLIST_REPORTLUNS2 flag set even if the
inquiry data returns scsi-3 compliance).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Update version number to 8.01.07-k4.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Use generic isp_ops.fw_dump() function.

Rather than a direct call, as was done in the case of a
RISC-paused state within the ISP24xx interrupt handler.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state is detected.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct reset handling logic.

- honor ISP24XX NVRAM settings for lip-reset, full-login-lip, and
  device-reset.
- correct LIP_FULL_LOGIN mailbox command issuance.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct IOCB queueing mechanism for ISP54XX HBAs.

Original code would incorrectly use non-24xx code-paths.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Detect GPSC capabilities within a fabric.

Disable subsequent GPSC queries if Fabric Management services do
not support the operation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Use proper prep_ms_iocb() function during GFPN_ID.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Correct endianess issue while interrogating MS status.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: Don't log trace-control async-events.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] seagate: remove BROKEN tag

Apparently the driver compiles and runs, so tidy up some macro warnings
and bring it back as unBROKEN.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] scsi_transport_spi: fix sense buffer size error

The code does this:

unsigned char sense[SCSI_SENSE_BUFFERSIZE];
...
scsi_normalize_sense(sense, sizeof(*sense), sshdr)

however the sizeof will return 1 not 96 which means the sense data will
have no valid ASC/ASCQ values.  Fix by putting the correct sense size.
The only affected case for this would have been the DV buffer sanity
check failure, which is fortunately quite rare.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] Add missing completion to scsi_complete_async_scans()

If either scsi_complete_async_scans() is called a second time
before the first call has finished, or a host scan is started while
scsi_complete_async_scans() is still sleeping, it would fail to wake up
the other task, which would sleep forever.

I've changed the kernel-doc to make it clear that
scsi_complete_async_scans() only guarantees that scans which started
before it was called are guaranteed to have finished when it returns.
I considered making it wait until all scans are completed, but it can't
guarantee that no more scans will start before it returns anyway, and it
runs the risk of confusing other callers of scsi_complete_async_scans()
for hosts actually scanning.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] qla2xxx: make qla2x00_reg_remote_port() static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] advansys: wrap PCI table inside ifdef CONFIG_PCI

The Advansys ISA/EISA/PCI driver has a compile error when
CONFIG_PCI=n, so wrap the pci_device_id table inside
ifdef CONFIG_PCI.

drivers/scsi/advansys.c: At top level:
drivers/scsi/advansys.c:18219: error: array type has incomplete element type
drivers/scsi/advansys.c:18221: error: 'PCI_ANY_ID' undeclared here (not in a function)
make[2]: *** [drivers/scsi/advansys.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[PATCH] x86_64: Fix dump_trace()

If caller passed the tsk, we should use it to validate a stack ptr.
Otherwise, sysrq-t and other debugging stuff doesn't work.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4081/1: Add definition for TI Sync Serial Protocol
  [ARM] 4080/1: Fix for the SSCR0_SlotsPerFrm macro
  [ARM] Fix VFP initialisation issue for SMP systems
  [ARM] 4078/1: Fix ARM copypage cache coherency problems
  [ARM] 4077/1: iop13xx: fix __io() macro
  [ARM] 4074/1: Flat loader stack alignment
  [ARM] 4073/1: Prevent s3c24xx drivers from including asm/arch/hardware.h and asm/arch/irqs.h
  [ARM] 4071/1: S3C24XX: Documentation update
  [ARM] 4066/1: correct a comment about PXA's sched_clock range
  [ARM] 4065/1: S3C24XX: dma printk fixes
  [ARM] 4064/1: make pxa_get_cycles() static
  [ARM] 4063/1: ep93xx: fix IRQ_EP93XX_GPIO?MUX numbering

[ARM] 4081/1: Add definition for TI Sync Serial Protocol

Of the possible SSP frame formats (FRF bits in SSCR0), only SSCR0_PSP is defined. Other possible formats are Motorola SPI (0<<4), TI SSP (1<<4) and Microwire (2<<4). Attached patch adds a definition SSCR0_TISSP.
This mode is used for the sound codec attached to the PXA272 SSP1 of some HTC PDA phones.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4080/1: Fix for the SSCR0_SlotsPerFrm macro

The SSCR0_SlotsPerFrm macro writes a 3-bit value to bits [2:0], while the correct location of FRDC in SSCR0 is at bits [26:24]. This patch adds the missing "<< 24".

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] Fix VFP initialisation issue for SMP systems

When we install the handlers for context switching, we must enable
VFP on all CPU cores, otherwise undefined (and random) effects
occur.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[PATCH] Fix insta-reboot with "i386: Relocatable kernel support"

Commit 968de4f02621db35b8ae5239c8cfc6664fb872d8 ("i386: Relocatable
kernel support") caused problems for people with old binutils versions
that didn't mark ".text.*" sections automatically allocated.

So we should use .section command to specifically mark .text.head
section as AX (allocatable and executable) to solve the problem.

This should be unnecessary with binutils 2.15 and later, which is
already three years old, but it doesn't hurt supporting older toolchains
where possible.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] selinux: fix selinux_netlbl_inode_permission() locking

do not call a sleeping lock API in an RCU read section.
lock_sock_nested can sleep, its BH counterpart doesn't.
selinux_netlbl_inode_permission() needs to use the BH counterpart
unconditionally.

Compile tested.

From: Ingo Molnar <mingo@elte.hu>

added BH disabling, because this function can be called from non-atomic
contexts too, so a naked bh_lock_sock() would be deadlock-prone.

Boot-tested the resulting kernel.

Signed-off-by: Parag Warudkar <paragw@paragw.zapto.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cfq-iosched: merging problem

Two issues:

- The final return 1 should be a return 0, otherwise comparing cfqq is
  a noop.

- bio_sync() only checks the sync flag, while rq_is_sync() checks both
  for READ and sync. The latter is what we want. Expand the bio check
  to include reads, and relax the restriction to allow merging of async
  io into sync requests.

In the future we want to clean up the SYNC logic, right now it means
both sync request (such as READ and O_DIRECT WRITE) and unplug-on-issue.
Leave that for later.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] libata: fix combined mode

This is a slight variant on the patch I posted December 16th to fix
libata combined mode handling. The only real change is that we now
correctly also reserve BAR1,2,4. That is basically a neatness issue.

Jeff was unhappy about two things

1. That it didn't work in the case of one channel native one channel
legacy.

This is a silly complaint because the SFF layer in libata doesn't handle
this case yet anyway.

2. The case where combined mode is in use and IDE=n.

In this case the libata quirk code reserves the resources in question
correctly already.

Once the combined mode stuff is redone properly (2.6.21) then the entire
mess turns into a single pci_request_regions() for all cases and all the
ugly resource hackery goes away.

I'm sending this now rather than after running full test suites so that
it can get the maximal testing in a short time. I'll be running tests on
this after lunch.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Acked-by: Theodore Tso <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sound: hda: detect ALC883 on MSI K9A Platinum motherboards (MS-7280)

Recognize the Realtek ALC883 chip on MSI K9A Platinum motherboards
(model no. MS-7280), enabling full sound capabilities.

Signed-off-by: Leonard Norrgård <leonard.norrgard@refactor.fi>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert "[PATCH] x86_64: fix boot hang caused by CALGARY_IOMMU_ENABLED_BY_DEFAULT"

This reverts commit a9622f6219ce58faba1417743bf3078501eb3434.  Now that
the Calgary code apparently detects itself properly, it's not needed any
more.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Linux 2.6.20-rc3

...because it's always a good idea to cut a release *before* you go out
to party and get drunk.

Remember kids: "Don't Drink and Release!"

[PATCH] restore ->pdeath_signal behaviour

Commit b2b2cbc4b2a2f389442549399a993a8306420baf introduced a user-
visible change: ->pdeath_signal is sent only when the entire thread
group exits.

While this change is imho good, it may break things.  So restore the
old behaviour for now.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
To: Albert Cahalan <acahalan@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Linus Torvalds <torvalds@osdl.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Qi Yong <qiyong@fc-cn.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Handle ISA devices with no 'regs' property.
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix of_iounmap() region release.
  [SPARC64]: Fix "mem=xxx" handling.

[XFRM]: Algorithm lookup using .compat name

Installing an IPsec SA using old algorithm names (.compat) does not work
if the algorithm is not already loaded. When not using the PF_KEY
interface, algorithms are not preloaded in xfrm_probe_algs() and
installing a IPsec SA fails.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Don't export linux/random.h outside __KERNEL__.

Don't add it there please; add it lower down inside the existing #ifdef
__KERNEL__. You just made the _userspace_ net.h include random.h, which
then fails to compile unless <asm/types.h> was already included.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Add memory barrrier to netif_poll_enable()

When a driver writer calls this, they generally expect that
all previous stores and modifications they've made will be
visible before netif_poll_enable() executes, so ensure this.

Noticed by Ben H.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Handle ISA devices with no 'regs' property.

And this points out that the return value from
isa_dev_get_resource() and the 'pregs' arg to
isa_dev_get_irq() are totally unused.

Based upon a patch from Richard Mortimer <richm@oldelvet.org.uk>

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix of_iounmap() region release.

We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Fix "mem=xxx" handling.

We were not being careful enough.  When we trim the physical
memory areas, we have to make sure we don't remove the kernel
image or initial ramdisk image ranges.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: export heartbeat thread pid via configfs
  ocfs2: always unmap in ocfs2_data_convert_worker()
  ocfs2: ignore NULL vfsmnt in ocfs2_should_update_atime()
  ocfs2: Allow direct I/O read past end of file
  ocfs2: don't print error in ocfs2_permission()

Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: fix bogus dma mapping
  ieee1394: sbp2: pass REQUEST_SENSE through to the target

[PATCH] fuse: fix typo

Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sparc32: add offset in pci_map_sg()

Add sg->offset to sg->dvma_address in pci_map_sg() on sparc32.  Without the
offset, transfers to buffers that do not begin on a page boundary will not
work as expected.

Signed-off-by: Jan Andersson <jan.andersson@ieee.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kvm: fix GFP_KERNEL allocation in atomic section in kvm_dev_ioctl_create_vcpu()

fix an GFP_KERNEL allocation in atomic section: kvm_dev_ioctl_create_vcpu()
called kvm_mmu_init(), which calls alloc_pages(), while holding the vcpu.

The fix is to set up the MMU state in two phases: kvm_mmu_create() and
kvm_mmu_setup().

(NOTE: free_vcpus does an kvm_mmu_destroy() call so there's no need for any
extra teardown branch on allocation/init failure here.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Fix oops on oom

__free_page() doesn't like a NULL argument, so check before calling it.  A
NULL can only happen if memory is exhausted during allocation of a memory
slot.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Rename some msrs

No need to append _MSR to msr names, a prefix should suffice.

Signed-off-by: Nguyen Anh Quynh <aquynh@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: More msr misery

These msrs are referenced by benchmarking software when pretending to be an
Intel cpu.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Move common msr handling to arch independent code

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Implement a few system configuration msrs

Resolves sourceforge bug 1622229 (guest crashes running benchmark software).

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Initialize kvm_arch_ops on unload

The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which
causes an error with the following sequence.

1. Load the supported arch's module.
2. Load the unsupported arch's module.\e$B!!\e(B(loading error)
3. Unload the unsupported arch's module.

You'll get the following error message after step 3.  "BUG: unable to handle
to handle kernel paging request at virtual address xxxxxxxx"

The problem here is that the unsupported arch's module overwrites kvm_arch_ops
of the supported arch's module at step 2.

This patch initializes kvm_arch_ops upon loading architecture specific kvm
module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set
correctly.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Simplify is_long_mode()

Instead of doing tricky stuff with the arch dependent virtualization
registers, take a peek at the guest's efer.

This simlifies some code, and fixes some confusion in the mmu branch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] KVM: Use boot_cpu_data instead of current_cpu_data

current_cpu_data invokes smp_processor_id(), which is inadvisable when
preemption is enabled.  Switch to boot_cpu_data instead.

Resolves sourceforge bug 1621401.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Update CREDITS and MAINTAINERS entries for Lennert Buytenhek

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PIIX/SLC90E66: PIO mode fallback fix

The fallback to PIO mode in the hwif->dma_check() handler doesn't work in
the Intel PIIX and SMsC SLC90E66 IDE drivers because:

- config_drive_for_dma() calls the hwif->speedproc() handler with a wrong
  mode number (unbiased by XFER_PIO_0) in case of the PIO fallback;

- hwif->tuneproc() handler doesn't really set the drive's own speed (this
  is not fixed as yet).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] PIIX: remove check for broken MW DMA mode 0

There's no need to check in piix_config_drive_for_dma() for broken MW DMA
mode 0 as this mode is not supported by the driver (it sets
hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed().

(Alan sayeth "Probably right but if not you've got a subtle corruptor.  Should
at least stick a BUG_ON mode 0 setting right close when the mode is set.")

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lockdep: printk warning fix

kernel/lockdep.c: In function `lookup_chain_cache':
kernel/lockdep.c:1339: warning: long long unsigned int format, u64 arg (arg 2)
kernel/lockdep.c:1344: warning: long long unsigned int format, u64 arg (arg 2)

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] spi_s3c24xx_gpio: use right header

Russel King recently reminded us that one shouldn't use asm/arch/hardware.h
but one should use asm/hardware.h.  Unfortunately, the spi_s3c24xx_gpio
driver is using the wrong header.  This patch is fixing that.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] respect srctree/objtree in Documentation/DocBook/Makefile

The KERNELDOC and DOCPROC variables are relative to the
$(srctree)/$(objtree) and expect to be run only from there ...  attached
patch adds proper srctree/objtree prefixes to both variables.

Acked-by: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cpuset procfs warning fix

fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type
fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type

Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Buglet in vmscan.c

Fix a rather obvious buglet.  Noticed while instrumenting the VM using
/proc/vmstat.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ARM: OMAP: fix missing header on apollon board

Fix apollon board compiler error

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ARM: OMAP: fix GPMC compiler errors

Fix GPMC compiler errors on OMAP2

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SPI/MTD: mtd_dataflash oops prevention

Return a fault code if the Dataflash driver runs into a "no device present"
error when the MISO line has a pulldown (it currently expects a pullup), so
that rmmod won't oops.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] m25p80 build fixes (with MTD debug)

Fix build issues that show up with the m25p80 SPI flash driver when
building with MTD debug enabled.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] SPI: define null tx_buf to mean "shift out zeroes"

Some issues were recently turned up with the current specification of what
it means for spi_transfer.tx_buf to be null, as part of transfers which are
(from the SPI protocol driver perspective) pure reads.

Specifically, that it seems better to change the TX behaviour there from
"undefined" to "will shift zeroes".  This lets protocol drivers (like the
ads7846 driver) depend on that behavior.  It's what most controller drivers
in the tree are already doing (with one exception and one case of driver
wanting-to-oops), it's what Microwire hardware will necessarily be doing,
and it removes an issue whereby certain security audits would need to
define such a value anyway as part of removing covert channels.

This patch changes the specification to require shifting zeroes, and
updates all currently merged SPI controller drivers to do so.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] page_mkclean_one(): fix call to set_pte_at()

(akpm: macros are wonderful)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] cciss: build with PROC_FS=n

RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the
CONFIG_PROC_FS block.

drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] MM: SLOB is broken by recent cleanup of slab.h

Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init
has now the __init attribute for both slab.c and slob.c.  This routine
cannot be removed after init in the case of slob.c -- it serves as a timer
callback.

Provide a separate timer callback routine, call it once from kmem_cache_init,
keep the __init attribute on the latter.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ramfs breaks without CONFIG_BLOCK

ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is
not configured in, 'set_page_dirty' makes a call via a NULL pointer.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] module: fix mod_sysfs_setup() return value

mod_sysfs_setup() doesn't return error when kobject_add_dir() failed.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix compilation of via-pmu-backlight

Signed-off-by: Andreas Schwab <schwab@suse.de>
Cc: "Yu, Luming" <luming.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sched: fix cond_resched_softirq() offset

Remove the __resched_legal() check: it is conceptually broken.  The biggest
problem it had is that it can mask buggy cond_resched() calls.  A
cond_resched() call is only legal if we are not in an atomic context, with
two narrow exceptions:

 - if the system is booting
 - a reacquire_kernel_lock() down() done while PREEMPT_ACTIVE is set

But __resched_legal() hid this and just silently returned whenever
these primitives were called from invalid contexts. (Same goes for
cond_resched_locked() and cond_resched_softirq()).

Furthermore, the __legal_resched(0) call was buggy in that it caused
unnecessarily long softirq latencies via cond_resched_softirq().  (which is
only called from softirq-off sections, hence the code did nothing.)

The fix is to resurrect the efficiency of the might_sleep checks and to
only allow the narrow exceptions.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix mrproper incompleteness

include/linux/utsrelease.h and include/linux/version.h aren't removed any
more by mrproper in kernel 2.6.20-rc2.  The patch below fixes this.

The definition of MRPROPER_FILES looks weird: generated-headers looks like
a misspelling of generated_headers, but that one is a Makefile target, not
a variable or a file, so I don't see how including it in MRPROPER_FILES
could have any effect.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Update to Documentation/tty.txt on line disciplines

While trying to develop a line discipline I found a couple of things worth
mentioning in Documentation/tty.txt which weren't, so I decided to add
them.  It would be nice if someone more knowledgeable than me in that area
would look over them, in case I got something wrong.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: isicom, eliminate spinlock recursion

Many spinlock recursion was in the isicom driver.  Eliminate it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] make fn_keys work again on power/macbooks

The apple fn keys don't work anymore with 2.6.20-rc1.

The reason is that USB_HID_POWERBOOK appears in several files although
USB_HIDINPUT_POWERBOOK is the thing to be used.

The patch fixes this.

Cc: Greg KH <greg@kroah.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] MAINTAINERS: email addr change for Eric Moore

Update to maintainers list.
My employer has changed the domain from lsil to lsi.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] IB/mthca: Fix FMR breakage caused by kmemdup() conversion

Commit bed8bdfd ("IB: kmemdup() cleanup") introduced one bad conversion to
kmemdup() in mthca_alloc_fmr(), where the structure allocated and the
structure copied are not the same size.  Revert this back to the original
kmalloc()/memcpy() code.

Reported-by: Dotan Barak <dotanb@mellanox.co.il>.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: mxser, fix oops when removing opened

tty_driver->owner is not set, so if somebody remove mxser_module, it might
oops (and doesn't tell the user: no way, it's in use). Set the .owner value.

Cc: <osv@javad.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pci/probe: fix macro that confuses kernel-doc

Don't have macros between a function's kernel-doc block and the function
definition.  This is not valid for kernel-doc.

Warning(/var/linsrc/linux-2.6.20-rc1-git8//drivers/pci/probe.c:653): No description found for parameter 'IORESOURCE_PCI_FIXED'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Add .gitignore file for relocs in arch/i386

Due to the changes to make the kernel relocateable a new file is created
during the build process.

[jirislaby@gmail.com: The .gitigonre was intended to be in arch/ subtree]
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix oom killer kills current every time if there is memory-less-node take2

constrained_alloc(), which is called to detect where oom is from, checks
passed zone_list().  If zone_list doesn't include all nodes, it thinks oom
is from mempolicy.

But there is memory-less-node.  memory-less-node's zones are never included
in zonelist[].

contstrained_alloc() should get memory_less_node into count.  Otherwise, it
always thinks 'oom is from mempolicy'.  This means that current process
dies at any time.  This patch fix it.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] rcu: rcutorture suspend fix

Fix suspend hang: rcutorture threads need to be nofreeze.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] change WARN_ON back to "BUG: at ..."

WARN_ON() ever triggering is a kernel bug.  Do not try to paper over this
fact by suggesting to the user that this is 'only' a warning, as the
following recent commit does:

  commit 30e25b71e725b150585e17888b130e3324f8cf7c
  Author: Jeremy Fitzhardinge <jeremy@goop.org>
  Date:   Fri Dec 8 02:36:24 2006 -0800

    [PATCH] Fix generic WARN_ON message

    A warning is a warning, not a BUG.

( it might make sense to rename BUG() to CRASH() and BUG_ON() to
  CRASH_ON(), but that does not change the fact that WARN_ON()
  signals a kernel bug. )

i and others objected to this change during lkml review:

  http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2

still the change slipped upstream - grumble :)

Also, use the standard "BUG: " format to make it easier to grep logs and
to make it easier to google for kernel bugs.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] powerpc iseries link error in allmodconfig

Choose rpa_vscsi.c over iseries_vscsi.c when building both pseries and
iseries.  This fixes a link error.

Signed-off-by: Judith Lebzelter <judith@osdl.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix lock inversion aio_kick_handler()

lockdep found a AB BC CA lock inversion in retry-based AIO:

1) The task struct's alloc_lock (A) is acquired in process context with
   interrupts enabled.  An interrupt might arrive and call wake_up() which
   grabs the wait queue's q->lock (B).

2) When performing retry-based AIO the AIO core registers
   aio_wake_function() as the wake funtion for iocb->ki_wait.  It is called
   with the wait queue's q->lock (B) held and then tries to add the iocb to
   the run list after acquiring the ctx_lock (C).

3) aio_kick_handler() holds the ctx_lock (C) while acquiring the
   alloc_lock (A) via lock_task() and unuse_mm().  Lockdep emits a warning
   saying that we're trying to connect the irq-safe q->lock to the
   irq-unsafe alloc_lock via ctx_lock.

This fixes the inversion by calling unuse_mm() in the AIO kick handing path
after we've released the ctx_lock.  As Ben LaHaise pointed out __put_ioctx
could set ctx->mm to NULL, so we must only access ctx->mm while we have the
lock.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix IPMI watchdog set_param_str() using kstrdup

set_param_str() cannot use kstrdup() to duplicate the parameter.  That's
fine when the driver is compiled as a module but it sure is not when built
into the kernel as the kernel parameters are parsed before the kmalloc
slabs are setup.

Signed-off-by: Sebastien Dugué <sebastien.dugue@bull.net>
Acked-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[ARM] 4078/1: Fix ARM copypage cache coherency problems

If PG_dcache_dirty is set for a page, we need to flush the source page
before performing any copypage operation using a different virtual address.

This fixes the copypage implementations for XScale, StrongARM and ARMv6.

This patch fixes segmentation faults seen in the dynamic linker under
the usage patterns in glibc 2.4/2.5.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4077/1: iop13xx: fix __io() macro

Since iop13xx defines the PCI I/O spaces with physical resource addresses
the __io macro needs to perform the physical to virtual conversion.  I
incorrectly assumed that this would be handled by ioremap, but drivers
(like e1000) directly dereference the address returned from __io.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4074/1: Flat loader stack alignment

The ARM EABI requires doubleword (8-byte) stack alignment at all public entry
points.  The patch below makes the bFLT loader honour this.
It's always safe to start with a doubleword aligned stack so it doesn't seem
worth making this conditional on CONFIG_AEABI.

Paul

Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4073/1: Prevent s3c24xx drivers from including asm/arch/hardware.h and asm/arch/irqs.h

As reminded in http://lkml.org/lkml/2006/12/23/26, one should use
asm/hardware.h and asm/irq.h but absent-minded devs like me tends to use
asm/arch/hardware.h and/or asm/arch/irqs.h.
This patch aims at preventing such things.

In order to make it work, I had to modify asm-arm/irq.h too so that it can
be included from assembly files.
Also, as a side effect, I had to modify some headers who were using the
asm/arch/hardware.h or asm/arch/irqs.h.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4071/1: S3C24XX: Documentation update

Add documentation for the following items:

- new machines (AML M5900, VMTS, NexVision)
- updated rtc section
- removed comments about mtd cvs
- added spi section
- led section

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4066/1: correct a comment about PXA's sched_clock range

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4065/1: S3C24XX: dma printk fixes

The commit 505788cccbb96cd496b646594c8a5fcdc26bc2d9 in linus kernel tree
introduced some printks (for debugging ?) which are flooding the logs on
my h1940. This patch replace them with pr_debug calls.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4064/1: make pxa_get_cycles() static

... and fix a comment as well.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 4063/1: ep93xx: fix IRQ_EP93XX_GPIO?MUX numbering

Fix incorrect IRQ numbering in arch-ep93xx/irqs.h (source: Applied
Data Systems 2.6.17 kernel tree.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>