staging: omap-thermal: update OMAP54xx clock sources

This patch updates the OMAP54xx data structure to use
the right clock source name for ES2.0.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: introduce new features of OMAP54xx

On OMAP54xx ES2.0 there are new features inside the bandgap
device. This patch introduces the registers definition
to access these features and adapts the data structures
to map these new registers. The new features are:

. SIDLE mode
. Cumulative register
. History buffer.
. Buffer freeze bit
. Buffer clear bit

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove from register map soc and mode on OMAP5

On OMAP54xx ES2.0 there is no single read and only one mode: continuous
mode. For this reason, there is no point in defining register fields
for these operations.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: standardize register nomenclature to use 'GPU'

In order to keep same nomenclature across the register definition,
this change will make all 'MM' suffixes to be named 'GPU'.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update OMAP54xx conv_table

This patch updates the ADC conversion table for OMAP5430 ES2.0 devices.

Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: introduce clock feature flag

The clock to Bandgap module is SW controlled on some version of
OMAP silicon (OMAP44xx). But on OMAP54xx ES2.0
onwards this is HW-Auto controlled. Hence introduce a feature flag
to use/not-to-use SW enable/disable of BG clock.

Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: Add print when TSHUT temperature reached

To indicate that board was shut down due to TSHUT temperature reached
it is good to print some information message before shutting down.

Signed-off-by: Ruslan Ruslichenko <x0191366@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wlan-ng: add a bounds check

I'm not sure where these results come from, but it can't hurt to
add a sanity check the array offset.  The .results[] array on the
next line has HFA384x_CHINFORESULT_MAX (16) elements.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wlan-ng: clean up prism2sta_inf_chinforesults()

This function is ugly because it hits against the 80 character
limit.  This patch does several things to clean it up.

1) Introduces "result" instead of inf->info.chinforesult.result[n].
2) Reverses the ".scanchannels & (1 << i)" so everthing can be
   pulled in one indent level.
3) Use "chan" instead of "channel".
4) Tweaks the line breaks to the call to pr_debug().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: pod.c: fix checkpatch warning

 - WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: removed lines over 80 characters

This patch fixes the following checkpatch warning:
-WARNING: line over 80 characters

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: fix whitespace errors

This patch fixes the following checkpatch errors:
-ERROR: space required after that ','
-ERROR: spaces required around that '='
-ERROR: space prohibited before that close parenthesis
-WARNING: please, no space before tabs

Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: remove unnecessary braces

This patch fixes the following checkpatch warning:
-WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: added missing space

This patch fixes the following checkpatch warning:
-WARNING: missing space after enum definition

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: removed assignments in if conditions

This patch fixes the following checkpatch error:
-ERROR: do not use assignment in if condition

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: replaced lines over 80 characters

This patch fixes some of the following checkpatch warnings:
-WARNING: line over 80 characters

We did not split format strings for readability.

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: (foo*) should be (foo *)

This patch fixes the following checkpatch error:
-ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: spaces required around that '='

This patch fixes the following checkpatch error:
-ERROR: spaces required around that '='

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: do not init static/globals to 0

This patch fixes the following checkpatch errors:
-ERROR: do not initialise statics to 0 or NULL
-ERROR: do not initialise globals to 0 or NULL

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: libsrc: fix indention

This patch fixes the following checkpatch warning:
-ERROR: code indent should use tabs where possible
-WARNING: suspect code indent for conditional statements

Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: Remove redundant NULL check before kfree

kfree on NULL pointer is a no-op.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: bp_mod: Removed trailing whitespaces

Fixed coding style issue.

Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fix all sparse warnings in silicom/bypasslib/

Fix all sparse warning in drivers/staging/silicom/bypasslib/,
e.g.:

drivers/staging/silicom/bypasslib/bypass.c:471:21: warning: non-ANSI function declaration of function 'init_lib_module'
drivers/staging/silicom/bypasslib/bypass.c:478:25: warning: non-ANSI function declaration of function 'cleanup_lib_module'
drivers/staging/silicom/bypasslib/bypass.c:137:5: warning: symbol 'is_bypass_dev' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:182:5: warning: symbol 'is_bypass' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:192:5: warning: symbol 'get_bypass_slave' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:197:5: warning: symbol 'get_bypass_caps' was not declared. Should it be static?
drivers/staging/silicom/bypasslib/bypass.c:202:5: warning: symbol 'get_wd_set_caps' was not declared. Should it be static?
etc.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: Remove duplicated code in gdm_qos.c

The first branch of the if statement is ended with a return thus there
is no need for an else if, and thus we can move the duplicated code to
the top and use it for the other two branches.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: Remove unused variable in gdm_qos.c

len is never read after assignment, thus can be removed.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: Include corresponding header file (fix sparse warning)

sdio_boot.c and netlink_k.c both have a corresponding header file with
their function prototypes but fail to include them, which leads to the
following sparse warnings:
sdio_boot.c:135:5: warning: symbol 'sdio_boot' was not declared. Should it be static?
netlink_k.c:89:13: warning: symbol 'netlink_init' was not declared. Should it be static?
netlink_k.c:109:6: warning: symbol 'netlink_exit' was not declared. Should it be static?
netlink_k.c:114:5: warning: symbol 'netlink_send' was not declared. Should it be static?

-> Add the include files and silence the warning

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Remove dma_addr_t cast compilation warnings

Eliminate some warnings by casting to unsigned long before
casting a dma_addr_t value to a pointer.

btw:

Does slicoss always work on x86-32?
Is a pshmem guaranteed to be accessible
by a 32 bit address?

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/sm7xxfb: Convert to SIMPLE_DEV_PM_OPS

Instead of assigning the pm_ops fields individually we can simply use
SIMPLE_DEV_PM_OPS.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Javier Muñoz <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/slicoss: Use ether_crc for mac hash calculation

Instead of performing the hash calculation for the mac address by ourself, we
can simply reuse ether_crc and shift only the result according to our
needs.
The code was tested against the previous implementation by verifying both
implementations against each other in userspace for 16200000000 different
mac addresses, changing the vendor bits of the mac address first.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/slicoss: Fix buffer possible overflow in slic_card_locate

smatch complains about a possible buffer overflow
slicoss.c:3651 slic_card_locate() error: buffer overflow
'physcard->adapter' 4 <= 4

If the for loop is not exited prematurely i++ is executed after the last
iteration and thus i can be 4, which is out of bounds for
physcard->adapter.

-> Add check for this condition and simplify the if statement by
inverting the condition.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/slicoss: Fix operation may be undefined warning

gcc complains about an undefined operation:
slicoss.c:1417:19: warning: operation on 'rspq->pageindex' may be
undefined [-Wsequence-point]

The intended operation was (probably) to retrieve the pageindex + 1 and let
it wrap around if it reaches the num_pages.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/slicoss: Remove always true if statement

skbtype is assigned once to NORMAL_ETHFRAME and then checked if it is
NORMAL_ETHFRAME -> remove the checks.

This also gets rid of the (false positive) smatch warning:
slicoss.c:2829 slic_xmit_start() error: potential NULL dereference
'hcmd'.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/slicoss: Check pointer before dereferencing

Smatch complains that the variable adapter is dereferenced before it is
checked:
slicoss.c:906 slic_timer_load_check() warn: variable dereferenced before
check 'adapter' (see line 904)

-> move the assignment after the check.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: removed no longer useful ttype.h file

Removed includes and added linux/types.h instead when needed.

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: removed custom pointer definitions

No checkpatch findings were resolved.

sed -i 's/\bULONG_PTR\b/u32/g' drivers/staging/vt6656/*.[ch]
sed -i 's/\bDWORD_PTR\b/u32/g' drivers/staging/vt6656/*.[ch]

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replaced custom DWORD definition with u32

Checkpatch findings were not resolved.

sed -i 's/\bDWORD\b/u32/g' drivers/staging/vt6656/*.[ch]
sed -i 's/\bPDWORD\b/u32 */g' drivers/staging/vt6656/*.[ch]

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replaced custom WORD definition with u16

Checkpatch findings were not resolved.

sed -i 's/\bWORD\b/u16/g' drivers/staging/vt6656/*.[ch]
sed -i 's/\bPWORD\b/u16 */g' drivers/staging/vt6656/*.[ch]

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: replaced custom BYTE definition with u8

Checkpatch findings were not resolved, only direct replacement.

sed -i 's/\bBYTE\b/u8/g' drivers/staging/vt6656/*.[ch]
sed -i 's/\bPBYTE\b/u8 */g' drivers/staging/vt6656/*.[ch]

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix spelling error in PHSModule.c

This patch fixes a spelling error in PHSModule.c

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Properly format comments in PHSModule.c

This patch properly formats comments, and removes
them as needed in PHSModule.c.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Properly format braces in PHSModule.c

This patch formats braces in PHSModule.c as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix all white space issues in PHSModule.c

This patch fixes all white space issues in
PHSModule.c as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sep: using strlcpy instead of strncpy

  set '\0' at tail for NUL terminated string, or TP_printk may cause issue.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: don't cast kzalloc() return value

Signed-off-by: Mihnea Dobrescu-Balaur <mihneadb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: potential forever loop verifying firmware

There is an ioctl() to write data to the firmware.  After the data
is written, it reads the databack from the firmware and compares
against what the user wanted to write and prints an error message
if it doesn't match.

The problem is that verify process has a forever loop if the
firmware size is not a multiple of 4.  I've fixed it by replacing
the bcm compare function with memcmp().

I have chopped out some debugging code in the process.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: avoid use-after-free in bcm_char_ioctl()

Free pBulkBuffer (pvBuffer) after pBulkBuffer->Register.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/sep: Check pointers before dereferencing (fix smatch warning)

smatch complains about two dereferenced before check issues:

sep_main.c:2898 sep_free_dma_tables_and_dcb() warn: variable dereferenced before check
'dma_ctx' (see line 2885)
sep_main.c:2898 sep_free_dma_tables_and_dcb() warn: variable dereferenced before check
'*dma_ctx' (see line 2885)

-> Move the checks to the top, but keep the semantics.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/sep: Fix smatch false positive about potential NULL dereference in sep_main.c

Smatch complains about a potential NULL pointer dereference:

sep_main.c:2312 sep_construct_dma_tables_from_lli() error: potential
NULL dereference 'info_out_entry_ptr'.

info_out_entry_ptr is initialized with NULL and if info_in_entry_ptr is
not NULL it gets derefenced.
However info_out_entry_ptr is only NULL in the first iteration of the
while loop and in this case info_in_entry_ptr is also NULL (as indicated
by the comment /* If info entry is null - this is the first table built */
-> this is a false positive.

Nevertheless we add a check for info_out_entry_ptr to silence this
warning and make it more robust in regard to code changes.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache/debug: compiler failure on PPC64 and revert commit.

On PPC64 we get this:
In file included from drivers/staging/zcache/debug.c:2:
drivers/staging/zcache/debug.h: In function 'dec_zcache_obj_count':
drivers/staging/zcache/debug.h:16: error: implicit declaration of function 'BUG_ON'

This simple patch adds the appropiate header file to finish
the compile and reverts
"staging: zcache: disable ZCACHE_DEBUG due to build error"
(5db5a20a50cfd078c78b13a988f237cca81aedc5)

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: Add support for 32bit ashmem calls in a 64bit kernel

Android's shared memory subsystem, Ashmem, does not support calls from a
32bit userspace in a 64 bit kernel. This patch adds support for syscalls
coming from a 32bit userspace in a 64bit kernel.

The patch has been successfully tested on ARMv8 AEM(64bit
platform model) and Versatile Express A9(32bit platform).

v2: Fix missing compat.h include.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: disable ZCACHE_DEBUG due to build error

In file included from drivers/staging/zcache/debug.c:2:0:
drivers/staging/zcache/debug.h: In function 'dec_zcache_obj_count':
drivers/staging/zcache/debug.h:16:2: error: implicit declaration of function 'BUG_ON' [-Werror=implicit-function-declaration]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache/debug: Coalesce all debug under CONFIG_ZCACHE_DEBUG

and also define this extra attribute in the Kconfig entry.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Module license is defined twice.

The other (same license) is at the end of the file.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Move the last of the debugfs counters out

We now have in zcache-main only the counters that are
are not debugfs related.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache/debug: Use an array to initialize/use debugfs attributes.

It makes it neater and also allows us to piggyback on that
in the zcache_dump function.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Move debugfs code out of zcache-main.c file.

Note that at this point there is no CONFIG_ZCACHE_DEBUG
option in the Kconfig. So in effect all of the counters
are nop until that option gets re-introduced in:
zcache/debug: Coalesce all debug under CONFIG_ZCACHE_DEBUG

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Fixed conflicts due to rebase]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Make the debug code use pr_debug

as if you are debugging this driver you would be using 'debug'
on the command line anyhow - and this would dump the debug
data on the proper loglevel.

While at it also remove the unconditional #define ZCACHE_DEBUG.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: The last of the atomic reads has now an accessory function.

And now we can move the code ([inc|dec]_zcache_[*]) to their own file
with a header to make them nops or feed in debugfs.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Provide accessory functions for counter decrease.

This way we can have all wrapped with these functions and
can disable/enable this with CONFIG_DEBUG_FS.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v2: Rebase on top of staging/zcache: Fix/improve zcache writeback code, tie to a config option]
[v3: Rebase on top of zcache: Fix compile warnings due to usage of debugfs_create_size_t]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: Provide accessory functions for counter increase

This is the first step in moving the debugfs code out of the
main file in-to another file. And also allow the code to run
without CONFIG_DEBUG_FS defined.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v2: Rebase on top staging/zcache: Fix/improve zcache writeback code, tie to a config option]
[v3: Rebase on top of zcache: Fix compile warnings due to usage of debugfs_create_size_t]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache: s/int/bool/ on the various options.

There are so many, but this allows us to at least have them
right in as bool.

Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Rebase on ramster->zcache move]
[v2: Rebase on staging/zcache: Fix/improve zcache writeback code, tie to a config option]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: logger: enforce GID and CAP check on log flush

Restrict log flushing to those in the logs group, or
anyone with CAP_SYSLOG.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: Charndeep Grewal <csgrewa@tycho.ncsc.mil>
Signed-off-by: Charndeep Grewal <csgrewa@tycho.ncsc.mil>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: logger: Allow a UID to read it's own log entries

Modify the kernel logger to record the UID associated with
the log entries. Always allow the same UID which generated a
log message to read the log message.

Allow anyone in the logs group, or anyone with CAP_SYSLOG, to
read all log entries.

In addition, allow the client to upgrade log formats, so they
can get additional information from the kernel.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: Nick Kralevich <nnk@google.com>
Signed-off-by: Nick Kralevich <nnk@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: lowmemorykiller: Change default debug_level to 1

The select...to kill messages are not very useful when not debugging
the lowmemorykiller itself. After the change to check TIF_MEMDIE
instead of using a task notifer this message can also get very
noisy.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: lowmemorykiller: Don't count reserved free memory

The amount of reserved memory varies between devices. Subtract it
here to reduce the amount of devices specific tuning needed for the
minfree values.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: get_name,set_name not to hold ashmem_mutex

Problem:
There exists a path in ashmem driver that could lead to acquistion
of mm->mmap_sem, ashmem_mutex in reverse order. This could lead
to deadlock in the system.
For Example, assume that mmap is called on a ashmem region
in the context of a thread say T1.
 sys_mmap_pgoff (1. acquires mm->mmap_sem)
  |
   --> mmap_region
  |
         ----> ashmem_mmap (2. acquires asmem_mutex)
 Now if there is a context switch after 1 and before 2,
 and if another thread T2 (that shares the mm struct) invokes an
 ioctl say ASHMEM_GET_NAME, this can lead to the following path

ashmem_ioctl
  |
  -->get_name (3. acquires ashmem_mutex)
|
---> copy_to_user (4. acquires the mm->mmap_sem)
Note that the copy_to_user could lead to a valid fault if no
physical page is allocated yet for the user address passed.
Now T1 has mmap_sem and is waiting for ashmem_mutex.
and T2 has the ashmem_mutex and is waiting for mmap_sem
Thus leading to deadlock.

Solution:
Do not call copy_to_user or copy_from_user while holding the
ahsmem_mutex. Instead copy this to a local buffer that lives
in the stack while holding this lock. This will maintain data
integrity as well never reverse the lock order.

Testing:
Created a unit test case to reproduce the problem.
Used the same to test this fix on kernel version 3.4.0
Ported the same patch to 3.8

Signed-off-by: Shankar Brahadeeswaran <shankoo77@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Fix timeout = 0 wait behavior

Fix wait behavior on timeout == 0 case

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Jamie Gennis <jgennis@google.com>
[jstultz: Added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Don't log wait timeouts when timeout = 0

If the timeout is zero, don't trip the timeout debugging

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Fix race condition between merge and signal

The copied sync_pt was activated immediately. If the sync_pt was
signaled before the entire merge was completed, the new fence's pt_list
could be iterated over while it is still in the process of being
created.

Moving the the sync_pt_activate call for all new sync_pts to after both
the sync_fence_copy_pts and the sync_fence_merge_pts calls ensure that
the pt_list is complete and immutable before it can be reached from the
timeline's active list.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add tracepoint support

Add support for tracepoints

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Whitespace changes, add commit message, move to staging]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Convert to use new value_str debug ops

Switch from print_obj/print_pt to the new
timeline_value_str and pt_value_str ops.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Refactor sync debug printing

Move driver callbacks to fill strings instead of using seq_files.  This
will allow those values to be used in a future tracepoint patch.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Use proper barriers when waiting indefinitely

The previous fix only addressed waiting with a timeout.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Update new fence status with sync_fence_signal_pt

If a fence's pt is signaled before sync_fence_create is called, the fence
will never transition into the signaled state.  This also address a tiny
race if a merged fence's pt after sync_fence_get_status checks it's status
and before fence->status is updated.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Protect unlocked access to fence status

Fence status is checked outside of locks in both sync_fence_wait and
sync_fence_poll.  This patch adds propper barrier protection in these
cases to avoid seeing stale status.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Dump sync state on fence errors

When we get a bad status, dump sync state

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Improve timeout dump messages

Improve the output of the timeout dumps, including
the fence pointer.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Dump sync state to console on timeout

If we hit a timeout, dump sync state to console

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message, whitespace fixups]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Change wait timeout to mirror poll semantics

Change wait timeout to act like poll

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message, squished typo-fix]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Fix error paths

Check the return value of get_unused_fd to make sure a valid
file descriptor is returned.

Make sure to call put_unused_fd even if an error occurs before
the fd can be used.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Fix error paths

Check the return value of get_unused_fd to make sure a valid
file descriptor is returned.

Make sure to call put_unused_fd even if an error occurs before
the fd can be used.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add reference counting to timelines

If a timeline is destroyed while fences still hold pts on it, the reworked
fence release handler can cause the timeline to be freed before all it's points
are freed.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Squished in compiler warning fix]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add internal refcounting to fences

If a fence is released while a timeline that one of it's pts is on is being
signaled, it is possible for that fence to be deleted before it is signaled.
This patch adds a refcount for internal references such as signaled pt
processing.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Optimize fence merges

If the two fences being merged contain sync_pts from the same timeline,
those two pts will be collapsed into a single pt representing the latter
of the two.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Whitespace fixes]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Reorder sync_fence_release

Previously fence's pts were freed before the were the fence was removed from the
global fence list.  This led to a race with the debugfs support where it would
iterate over sync_pts that had been freed.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Export sw_sync API

Needed to let modules link against sw_sync.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Export sync API symbols

This is needed to allow modules to link against the sync subsystem

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Allow async waits to be canceled

In order to allow drivers to cleanly handled teardown we need to allow them
to cancel pending async waits.  To do this cleanly, we move allocation of
sync_fence_waiter to the driver calling sync_async_wait().

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add poll support

Support poll on sync fence

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Add fill_driver_data support

Add fill_driver_data support to export fence data to ioctl

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add ioctl to get fence data

Add ioctl to get fence data

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Commit message tweaks]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Add debug support

Add debugfs support hooks.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add debugfs support

Add support for debugfs

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add timestamps to sync_pts

Add ktime timestamps to sync_pt structure and
update them when signaled

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sw_sync: Add cpu based sync driver

Adds a base sync driver that uses the cpu for serialization.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Add commit message, whitespace fixes and move to
staging directory]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sync: Add synchronization framework

Sync is a framework for synchronization between multiple
drivers. Sync implementations can take advantage of hardware
synchronization built into devices like GPUs.

Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robclark@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Erik Gilling <konkers@android.com>
[jstultz: Added commit message, moved to staging, squished minor fix in]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.9-rc1

Merge tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers

Pull fbdev UAPI disintegration from David Howells:
 "You'll be glad to here that the end is nigh for the UAPI patches.
  Only the fbdev/framebuffer piece remains now that the SCSI stuff has
  gone in.

  Here are the UAPI disintegration bits for the fbdev drivers.  It
  appears that Florian hasn't had time to deal with my patch, but back
  in December he did say he didn't mind if I pushed it forward."

Yay.  No more uapi movement.  And hopefully no more big header file
cleanups coming up either, it just tends to be very painful.

* tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/video

Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git./linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - Update the Xen ACPI memory and CPU hotplug locking mechanism.
 - Fix PAT issues wherein various applications would not start
 - Fix handling of multiple MSI as AHCI now does it.
 - Fix ARM compile failures.

* tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: fix compile failure on ARM with Xen enabled
  xen/pci: We don't do multiple MSI's.
  xen/pat: Disable PAT using pat_enabled value.
  xen/acpi: xen cpu hotplug minor updates
  xen/acpi: xen memory hotplug minor updates

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull  more VFS bits from Al Viro:
 "Unfortunately, it looks like xattr series will have to wait until the
  next cycle ;-/

  This pile contains 9p cleanups and fixes (races in v9fs_fid_add()
  etc), fixup for nommu breakage in shmem.c, several cleanups and a bit
  more file_inode() work"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify path_get/path_put and fs_struct.c stuff
  fix nommu breakage in shmem.c
  cache the value of file_inode() in struct file
  9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry
  9p: make sure ->lookup() adds fid to the right dentry
  9p: untangle ->lookup() a bit
  9p: double iput() in ->lookup() if d_materialise_unique() fails
  9p: v9fs_fid_add() can't fail now
  v9fs: get rid of v9fs_dentry
  9p: turn fid->dlist into hlist
  9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine
  more file_inode() open-coded instances
  selinux: opened file can't have NULL or negative ->f_path.dentry

(In the meantime, the hlist traversal macros have changed, so this
required a semantic conflict fixup for the newly hlistified fid->dlist)