mm: count only reclaimable lru pages

global_lru_pages() / zone_lru_pages() can be used in two ways:
- to estimate max reclaimable pages in determine_dirtyable_memory()
- to calculate the slab scan ratio

When swap is full or not present, the anon lru lists are not reclaimable
and also won't be scanned.  So the anon pages shall not be counted in both
usage scenarios.  Also rename to _reclaimable_pages: now they are counting
the possibly reclaimable lru pages.

It can greatly (and correctly) increase the slab scan rate under high
memory pressure (when most file pages have been reclaimed and swap is
full/absent), thus reduce false OOM kills.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Li, Ming Chun" <macli@brc.ubc.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vm: document that setting vfs_cache_pressure to 0 isn't a good idea

Reported-by: Christian Thaeter <ct@pipapo.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove __{add,sub}_zone_page_state()

__add_zone_page_state() and __sub_zone_page_state() are unused.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: throttle direct reclaim when too many pages are isolated already

When way too many processes go into direct reclaim, it is possible for all
of the pages to be taken off the LRU.  One result of this is that the next
process in the page reclaim code thinks there are no reclaimable pages
left and triggers an out of memory kill.

One solution to this problem is to never let so many processes into the
page reclaim path that the entire LRU is emptied.  Limiting the system to
only having half of each inactive list isolated for reclaim should be
safe.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmstat: add isolate pages

If the system is running a heavy load of processes then concurrent reclaim
can isolate a large number of pages from the LRU. /proc/vmstat and the
output generated for an OOM do not show how many pages were isolated.

This has been observed during process fork bomb testing (mstctl11 in LTP).

This patch shows the information about isolated pages.

Reproduced via:

-----------------------
% ./hackbench 140 process 1000
   => OOM occur

active_anon:146 inactive_anon:0 isolated_anon:49245
 active_file:79 inactive_file:18 isolated_file:113
 unevictable:0 dirty:0 writeback:0 unstable:0 buffer:39
 free:370 slab_reclaimable:309 slab_unreclaimable:5492
 mapped:53 shmem:15 pagetables:28140 bounce:0

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: shrink_inactive_list() nr_scan accounting fix fix

If sc->isolate_pages() return 0, we don't need to call shrink_page_list().
In past days, shrink_inactive_list() handled it properly.

But commit fb8d14e1 (three years ago commit!) breaked it.  current
shrink_inactive_list() always call shrink_page_list() although
isolate_pages() return 0.

This patch restore proper return value check.

Requirements:
  o "nr_taken == 0" condition should stay before calling shrink_page_list().
  o "nr_taken == 0" condition should stay after nr_scan related statistics
     modification.

Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: rename pgmoved variable in shrink_active_list()

Currently the pgmoved variable has two meanings.  It causes harder
reviewing.  This patch separates it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: update alloc_flags after oom killer has been called

It is possible for the oom killer to select current as the task to kill.
When this happens, alloc_flags needs to be updated accordingly to set
ALLOC_NO_WATERMARKS so the subsequent allocation attempt may use memory
reserves as the result of its thread having TIF_MEMDIE set if the
allocation is not __GFP_NOMEMALLOC.

Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: oom analysis: add shmem vmstat

Recently we encountered OOM problems due to memory use of the GEM cache.
Generally a large amuont of Shmem/Tmpfs pages tend to create a memory
shortage problem.

We often use the following calculation to determine the amount of shmem
pages:

shmem = NR_ACTIVE_ANON + NR_INACTIVE_ANON - NR_ANON_PAGES

however the expression does not consider isolated and mlocked pages.

This patch adds explicit accounting for pages used by shmem and tmpfs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: oom analysis: Show kernel stack usage in /proc/meminfo and OOM log output

The amount of memory allocated to kernel stacks can become significant and
cause OOM conditions.  However, we do not display the amount of memory
consumed by stacks.

Add code to display the amount of memory used for stacks in /proc/meminfo.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: oom analysis: add buffer cache information to show_free_areas()

It is often useful to know the statistics for all pages that are handled
like page cache pages when looking at OOM log output.

Therefore show_free_areas() should also display buffer cache statistics.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: oom analysis: add per-zone statistics to show_free_areas()

show_free_areas() displays only a limited amount of zone counters.  This
patch includes additional counters in the display to allow easier
debugging.  This may be especially useful if an OOM is due to running out
of DMA memory.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/memory.txt: remove some very outdated recommendations

Remove some very outdated recommendations in Documentation/memory.txt

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: show_free_areas(): display slab pages in two separate fields

If an OOM happens, we really want to know the number of remaining
reclaimable pages.  So the reclaimable slab and unreclaimable slab fields
should not be combined for display.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: clean up page_remove_rmap()

page_remove_rmap() has multiple PageAnon() tests and it has deep nesting.
Clean this up.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: restore interleaving of bootmem huge pages

I noticed that alloc_bootmem_huge_page() will only advance to the next
node on failure to allocate a huge page, potentially filling nodes with
huge-pages.  I asked about this on linux-mm and linux-numa, cc'ing the
usual huge page suspects.

Mel Gorman responded:

I strongly suspect that the same node being used until allocation
failure instead of round-robin is an oversight and not deliberate
at all. It appears to be a side-effect of a fix made way back in
commit 63b4613c3f0d4b724ba259dc6c201bb68b884e1a ["hugetlb: fix
hugepage allocation with memoryless nodes"]. Prior to that patch
it looked like allocations would always round-robin even when
allocation was successful.

This patch--factored out of my "hugetlb mempolicy" series--moves the
advance of the hstate next node from which to allocate up before the test
for success of the attempted allocation.

Note that alloc_bootmem_huge_page() is only used for order > MAX_ORDER
huge pages.

I'll post a separate patch for mainline/stable, as the above mentioned
"balance freeing" series renamed the next node to alloc function.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Andy Whitcroft <apw@canonical.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: clean up and update huge pages documentation

Attempt to clarify huge page administration and usage, and updates the
doucmentation to mention the balancing of huge pages across nodes when
allocating and freeing.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: use free_pool_huge_page() to return unused surplus pages

Use the [modified] free_pool_huge_page() function to return unused
surplus pages.  This will help keep huge pages balanced across nodes
between freeing of unused surplus pages and freeing of persistent huge
pages [from set_max_huge_pages] by using the same node id "cursor". It
also eliminates some code duplication.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: balance freeing of huge pages across nodes

Free huges pages from nodes in round robin fashion in an attempt to keep
[persistent a.k.a static] hugepages balanced across nodes

New function free_pool_huge_page() is modeled on and performs roughly the
inverse of alloc_fresh_huge_page().  Replaces dequeue_huge_page() which
now has no callers, so this patch removes it.

Helper function hstate_next_node_to_free() uses new hstate member
next_to_free_nid to distribute "frees" across all nodes with huge pages.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page_alloc: fix kernel-doc warning

Ummark function as having kernel-doc notation, fixing the kernel-doc
warning.

Warning(mm/page_alloc.c:4519): No description found for parameter 'zone'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: migrate swap cache page

In test, some pages in swap-cache can't be migrated, as they aren't rmap.

unmap_and_move() ignores swap-cache page which is just read in and hasn't
rmap (see the comments in the code), but swap_aops provides .migratepage.
Better to migrate such pages instead of ignore them.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: alloc page from other node in memory online

To initialize hotadded node, some pages are allocated.  At that time, the
node hasn't memory, this makes the allocation always fail.  In such case,
let's allocate pages from other nodes.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Yakui Zhao <yakui.zhao@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: make pages from movable zone always isolatable

Pages on movable zone have two types, MIGRATE_MOVABLE and MIGRATE_RESERVE,
both them can be movable, because only movable memory allocation can get
pages from movable zone.  This makes pages in movable zone always be able
to migrate.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: exclude isolated page from pco page alloc

Pages marked as isolated should not be allocated again.  If such pages
reside in pcp list, they can be allocated too, so there is a ping-pong
memory offline frees some pages to pcp list and the pages get allocated
and then memory offline frees them again, this loop will happen again and
again.

This should have no impact in normal code path, because in normal code
path, pages in pcp list aren't isolated, and below loop will break in the
first entry.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory hotplug: update zone pcp at memory online

In my test, 128M memory is hot added, but zone's pcp batch is 0, which is
an obvious error.  When pages are onlined, zone pcp should be updated
accordingly.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Yakui Zhao <yakui.zhao@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove obsoleted alloc_pages cpuset comment

When a cpuset's nodemask is updated, all attached tasks have their cached
task->mems_allowed updated by a heap instead of requiring an explicit call
to cpuset_update_task_memory_state(), which has since been removed in
58568d2a8215cb6f55caf2332017d7bdff954e1c ("cpuset,mm: update tasks'
mems_allowed in time").

Remove the obsoleted comment from the page allocator.

Cc: Paul Menage <menage@google.com>
Acked-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make swap token dummies static inlines

Make use of the compiler's typechecking on !CONFIG_SWAP as well.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: make block_device_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: make lock_manager_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: make file_lock_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: mark remaining inode_operations as const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: mark remaining address_space_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: mark remaining export_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: mark remaining super_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: make struct super_block::s_qcop const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const: make struct super_block::dq_op const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/mfd/ab3100-core.c: fix powerpc build error

drivers/mfd/ab3100-core.c:647: error: ab3100_init_settings causes a section type conflict

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: document `guest' column in /proc/stat

We added a new column in cpuX lines of /proc/stat, to show the amount of
time spent by a cpu servicing a guest, without updating
Documentation/filesystems/proc.txt

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: make sure data stored into inode is properly seen before unlocking new inode

In theory it could happen that on one CPU we initialize a new inode but
clearing of I_NEW | I_LOCK gets reordered before some of the
initialization.  Thus on another CPU we return not fully uptodate inode
from iget_locked().

This seems to fix a corruption issue on ext3 mounted over NFS.

[akpm@linux-foundation.org: add some commentary]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci: orphan driver and list

Remove myself as maintainer from the sdhci driver and steer people
towards the new MMC list for discussing it.

Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/media/dvb/pt1/pt1.c needs vmalloc.h

alpha:

drivers/media/dvb/pt1/pt1.c: In function 'pt1_cleanup_tables':
drivers/media/dvb/pt1/pt1.c:422: error: implicit declaration of function 'vfree'
drivers/media/dvb/pt1/pt1.c: In function 'pt1_init_tables':
drivers/media/dvb/pt1/pt1.c:431: error: implicit declaration of function 'vmalloc'
drivers/media/dvb/pt1/pt1.c:431: warning: assignment makes pointer from integer without a cast

Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perfcounters-rename-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Tidy up after the big rename
  perf: Do the big rename: Performance Counters -> Performance Events
  perf_counter: Rename 'event' to event_id/hw_event
  perf_counter: Rename list_entry -> group_entry, counter_list -> group_list

Manually resolved some fairly trivial conflicts with the tracing tree in
include/trace/ftrace.h and kernel/trace/trace_syscalls.c.

Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix whitespace inconsistencies
  rcu: Fix thinko, actually initialize full tree
  rcu: Apply results of code inspection of kernel/rcutree_plugin.h
  rcu: Add WARN_ON_ONCE() consistency checks covering state transitions
  rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU
  rcu: Simplify rcu_read_unlock_special() quiescent-state accounting
  rcu: Add debug checks to TREE_PREEMPT_RCU for premature grace periods
  rcu: Kconfig help needs to say that TREE_PREEMPT_RCU scales down
  rcutorture: Occasionally delay readers enough to make RCU force_quiescent_state
  rcu: Initialize multi-level RCU grace periods holding locks
  rcu: Need to update rnp->gpnum if preemptable RCU is to be reliable

Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter, powerpc, sparc: Fix compilation after perf_counter_overflow() change
  perf_counter: x86: Fix PMU resource leak
  perf util: SVG performance improvements
  perf util: Make the timechart SVG width dynamic
  perf timechart: Show the duration of scheduler delays in the SVG
  perf timechart: Show the name of the waker/wakee in timechart

Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Simplify sys_sched_rr_get_interval() system call
  sched: Fix potential NULL derference of doms_cur
  sched: Fix raciness in runqueue_is_locked()
  sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair()
  sched: Remove unneeded indentation in sched_fair.c::place_entity()

Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/profile.c: Switch /proc/irq/prof_cpu_mask to seq_file
  tracing: Export trace_profile_buf symbols
  tracing/events: use list_for_entry_continue
  tracing: remove max_tracer_type_len
  function-graph: use ftrace_graph_funcs directly
  tracing: Remove markers
  tracing: Allocate the ftrace event profile buffer dynamically
  tracing: Factorize the events profile accounting

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Print the hypervisor returned tsc_khz during boot
  x86: Correct segment permission flags in 64-bit linker script
  x86: cpuinit-annotate SMP boot trampolines properly
  x86: Increase timeout for EHCI debug port reset completion in early printk
  x86: Fix uaccess_32.h typo
  x86: Trivial whitespace cleanups
  x86, apic: Fix missed handling of discrete apics
  x86/i386: Remove duplicated #include
  x86, mtrr: Convert loop to a while based construct, avoid naked semicolon
  Revert 'x86: Fix system crash when loading with "reservetop" parameter'
  x86, mce: Fix compile warning in case of CONFIG_SMP=n
  x86, apic: Use logical flat on intel with <= 8 logical cpus
  x86: SGI UV: Map MMIO-High memory range
  x86: SGI UV: Add volatile semantics to macros that access chipset registers
  x86: SGI UV: Fix IPI macros
  x86: apic: Convert BUG() to BUG_ON()
  x86: Remove final bits of CONFIG_X86_OLD_MCE

Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-block

* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  nfs: initialize the backing_dev_info when creating the server
  writeback: make balance_dirty_pages() gradually back more off
  writeback: don't use schedule_timeout() without setting runstate
  nfs: nfs_kill_super() should call bdi_unregister() after killing super

Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (222 commits)
  V4L/DVB (13033): pt1: Don't use a deprecated DMA_BIT_MASK macro
  V4L/DVB (13029): radio-si4713: remove #include <linux/version.h>
  V4L/DVB (13027): go7007: convert printks to v4l2_info
  V4L/DVB (13026): s2250-board: Implement brightness and contrast controls
  V4L/DVB (13025): s2250-board: Fix memory leaks
  V4L/DVB (13024): go7007: Implement vidioc_g_std and vidioc_querystd
  V4L/DVB (13023): go7007: Merge struct gofh and go declarations
  V4L/DVB (13022): go7007: Fix mpeg controls
  V4L/DVB (13021): go7007: Fix whitespace and line lengths
  V4L/DVB (13020): go7007: Updates to Kconfig and Makefile
  V4L/DVB (13019): video: initial support for ADV7180
  V4L/DVB (13018): kzalloc failure ignored in au8522_probe()
  V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start()
  V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and s921_attach()
  V4L/DVB (13015): kmalloc failure ignored in m920x_firmware_download()
  V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only)
  V4L/DVB (13013): FM TX: si4713: Kconfig: Fixed two typos.
  V4L/DVB (13012): uvc: introduce missing kfree
  V4L/DVB (13011): Change tuner type of BeholdTV cards
  V4L/DVB (13009): gspca - stv06xx-hdcs: Reduce exposure range
  ...

Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix debugging dump
  UBIFS: improve lprops dump
  UBIFS: various minor commentary fixes
  UBIFS: improve journal head debugging prints
  UBIFS: define journal head numbers in ubifs-media.h
  UBIFS: amend commentaries
  UBIFS: check ubifs_scan error codes better
  UBIFS: do not print scary error messages needlessly
  UBIFS: add inode size debugging check
  UBIFS: constify file and inode operations
  UBIFS: remove unneeded call from ubifs_sync_fs
  UBIFS: kill BKL
  UBIFS: remove unused functions
  UBIFS: suppress compilation warning

Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: improve NOR flash erasure quirk
  UBI: introduce flash dump helper
  UBI: eliminate possible undefined behaviour
  UBI: print a warning if too many PEBs are corrupted
  UBI: amend NOR flash pre-erase quirk
  UBI: print a message if ECH is corrupted and VIDH is ok

Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
  drm/vgaarb: add VGA arbitration support to the drm and kms.
  drm/radeon: some r420s have a CP race with the DMA engine.
  drm/radeon/r600/kms: rv670 is not DCE3
  drm/radeon/kms: r420 idle after programming GA_ENHANCE
  drm/radeon/kms: more fixes to rv770 suspend/resume path.
  drm/radeon/kms: more alignment for rv770.c with r600.c
  drm/radeon/kms: rv770 blit init called too late.
  drm/radeon/kms: move around new init path code to avoid posting at init
  drm/radeon/r600: fix some issues with suspend/resume.
  drm/radeon/kms: disable VGA rendering engine before taking over VRAM
  drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
  drm/radeon/kms: add initial connector properties
  drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
  drm/radeon/kms: don't fail if we fail to init GPU acceleration
  drm/r600/kms: fixup number of loops per blit calculation.
  drm/radeon/kms: reprogram format in set base.
  drm/radeon: avivo chips have no separate int bit for display
  drm/radeon/r600: don't do interrupts
  drm: fix _DRM_GEM addmap error message
  drm: update crtc x/y when only fb changes
  ...

Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.

Driver-Core: fix devnode callbacks for dabusb and industrialio

The build of the dabusb driver broke:

  drivers/media/video/dabusb.c:758: error: unknown field 'nodename' specified in initializer
  drivers/media/video/dabusb.c:758: warning: initialization from incompatible pointer type
  make[3]: *** wait: No child processes.  Stop.

Due to this commit:

  e454cea: Driver-Core: extend devnode callbacks to provide permissions

Missing the dabusb driver's dabusb_nodename() callback.

Similar issues with the iio/industrialio driver in staging, pointed out
and patched by Jean Delvare.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Industrialio-parts-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfs: initialize the backing_dev_info when creating the server

NFS may free the server structure without ever having used the
bdi, so we either need to flag the bdi as being uninitialized or
initialize it up front. This does the latter.

This fixes a crash with mounting more than one NFS file system,
should people ever need that kind of obscure NFS functionality.

Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

writeback: make balance_dirty_pages() gradually back more off

Currently it just sleeps for a very short time, just 1 jiffy. If
we keep looping in there, continually delay for a little longer
of up to 100msec in total. That was the old limit for congestion
wait.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

writeback: don't use schedule_timeout() without setting runstate

Just use schedule_timeout_interruptible(), saves a call to
set_current_state().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

nfs: nfs_kill_super() should call bdi_unregister() after killing super

Otherwise we could be attempting to flush data for a writeback
thread and bdi that have already disappeared.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

perf: Tidy up after the big rename

 - provide compatibility Kconfig entry for existing PERF_COUNTERS .config's

 - provide courtesy copy of old perf_counter.h, for user-space projects

 - small indentation fixups

 - fix up MAINTAINERS

 - fix small x86 printout fallout

 - fix up small PowerPC comment fallout (use 'counter' as in register)

Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf: Do the big rename: Performance Counters -> Performance Events

Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Rename 'event' to event_id/hw_event

In preparation to the renames, to avoid a namespace clash.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Rename list_entry -> group_entry, counter_list -> group_list

This is in preparation of the big rename, but also makes sense
in a standalone way: 'list_entry' is a bad name as we already
have a list_entry() in list.h.

Also, the 'counter list' is too vague, it doesnt tell us the
purpose of that list.

Clarify these names to show that it's all about the group
hiearchy.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'linus' into perfcounters/rename

Merge reason: pull in all the latest code before doing the rename.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into linux-next

Conflicts:
fs/ubifs/super.c

Merge the upstream tree in order to resolve a conflict with the
per-bdi writeback changes from the linux-2.6-block tree.

sched: Simplify sys_sched_rr_get_interval() system call

By removing the need for it to know details of scheduling classes.

This allows PlugSched to define orthogonal scheduling classes.

Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter, powerpc, sparc: Fix compilation after perf_counter_overflow() change

Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow
handling") removed the regs field from struct perf_sample_data and
added a regs parameter to perf_counter_overflow().  This breaks the
build on powerpc (and Sparc) as reported by Sachin Sant:

  arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart':
  arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer

This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the
new struct perf_sample_data and perf_counter_overflow().

[ v2: also fix Sparc, Markus Metzger <markus.t.metzger@intel.com> ]

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

drm/vgaarb: add VGA arbitration support to the drm and kms.

VGA arb requires DRM support for non-kms drivers, to turn on/off
irqs when disabling the mem/io regions.

VGA arb requires KMS support for GPUs where we can turn off VGA
decoding. Currently we know how to do this for intel and radeon
kms drivers, which allows them to be removed from the arbiter.

This patch comes from Fedora rawhide kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: some r420s have a CP race with the DMA engine.

This patch makes sure the CP doesn't DMA do VRAM while 2D
is active by inserting a CP resync token.

todo: port to kms.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/r600/kms: rv670 is not DCE3

RV670 was using the wrong modesetting code.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: r420 idle after programming GA_ENHANCE

https://bugs.freedesktop.org/show_bug.cgi?id=24041

The idle allows rs690 to startup properly.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: more fixes to rv770 suspend/resume path.

This resumes my
RV730PRO (4650)
RV770 (4850)
fine.

Still researching the RV4550 (RV710), resumes without X fine.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge git://git./linux/kernel/git/jaswinder/linux-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6:
  includecheck fix: x86, cpu/common.c
  includecheck fix: kernel/trace, ring_buffer.c
  includecheck fix: include/linux, ftrace.h
  includecheck fix: include/linux, page_cgroup.h
  includecheck fix: include/linux, aio.h
  includecheck fix: include/drm, drm_memory.h
  includecheck fix: include/acpi, acpi_bus.h
  includecheck fix: drivers/xen, evtchn.c
  includecheck fix: drivers/video, vgacon.c
  includecheck fix: drivers/scsi, ibmvscsi.c
  includecheck fix: drivers/scsi, libfcoe.c
  includecheck fix: x86, shadow.c
  includecheck fix: x86, traps.c
  includecheck fix: um, helper.c
  includecheck fix: s390, sys_s390.c

loongson: fix cut-and-paste mis-merge

Ingo points out that I screwed up when merging the 'timers-for-linus'
branch in commit a03fdb7612874834d6847107198712d18b5242c7.

A bit too much copy-and-pasting caused the end result to have an
extraneous 'return' in the middle of an expression.  That was obviously
bogus.  Blush.

Reported-by-with-patch: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux:
  [PATCH] i2c-imx: make bus available early
  i2c-mv64xxx: correct mv64xxx_i2c_intr() return type

Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver-Core: extend devnode callbacks to provide permissions

Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (79 commits)
  USB serial: update the console driver
  usb-serial: straighten out serial_open
  usb-serial: add missing tests and debug lines
  usb-serial: rename subroutines
  usb-serial: fix termios initialization logic
  usb-serial: acquire references when a new tty is installed
  usb-serial: change logic of serial lookups
  usb-serial: put subroutines in logical order
  usb-serial: change referencing of port and serial structures
  tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl
  tty: Char: mxser, add support for CP112UL
  uartlite: support shared interrupt lines
  tty: USB: serial/mct_u232, fix tty refcnt
  tty: riscom8, fix tty refcnt
  tty: riscom8, fix shutdown declaration
  TTY: fix typos
  tty: Power: fix suspend vt regression
  tty: vt: use printk_once
  tty: handle VT specific compat ioctls in vt driver
  n_tty: move echoctl check and clean up logic
  ...

Merge branch 'perfcounters-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (58 commits)
  perf_counter: Fix perf_copy_attr() pointer arithmetic
  perf utils: Use a define for the maximum length of a trace event
  perf: Add timechart help text and add timechart to "perf help"
  tracing, x86, cpuidle: Move the end point of a C state in the power tracer
  perf utils: Be consistent about minimum text size in the svghelper
  perf timechart: Add "perf timechart record"
  perf: Add the timechart tool
  perf: Add a SVG helper library file
  tracing, perf: Convert the power tracer into an event tracer
  perf: Add a sample_event type to the event_union
  perf: Allow perf utilities to have "callback" options without arguments
  perf: Store trace event name/id pairs in perf.data
  perf: Add a timestamp to fork events
  sched_clock: Make it NMI safe
  perf_counter: Fix up swcounter throttling
  x86, perf_counter, bts: Optimize BTS overflow handling
  perf sched: Add --input=file option to builtin-sched.c
  perf trace: Sample timestamp and cpu when using record flag
  perf tools: Increase MAX_EVENT_LENGTH
  perf tools: Fix memory leak in read_ftrace_printk()
  ...

x86: Print the hypervisor returned tsc_khz during boot

On an AMD-64 system the processor frequency that is printed during
system boot, may be different than the tsc frequency that was
returned by the hypervisor, due to the value returned from
calibrate_cpu.

For debugging timekeeping or other related issues it might be
better to get the tsc_khz value returned by the hypervisor.

The patch below now prints the tsc frequency that the VMware
hypervisor returned.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1252095219.12518.13.camel@ank32.eng.vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'linus' into x86/urgent

Merge reason: Bring in changes that the next patch will depend on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Correct segment permission flags in 64-bit linker script

While these don't get actively used (afaict), it still doesn't hurt
for them to properly reflect what how respective segments will get
mapped/ accessed.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4AA0E95F0200007800013707@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cpuinit-annotate SMP boot trampolines properly

Add missing annotations, and make use of include/linux/init.h's
macros.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4AA0E8F60200007800013703@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Increase timeout for EHCI debug port reset completion in early printk

On one of my systems, several thousand iterations are needed before
CMD_RESET can be observed clear after setting it. Using a much
higher value here obviously cannot hurt.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4AA0E85D02000078000136F9@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

sched: Fix potential NULL derference of doms_cur

If CONFIG_CPUMASK_OFFSTACK is enabled but doms_cur alloc failed in
arch_init_sched_domains(), doms_cur will move back to
fallback_doms. But this time, fallback_doms has not been
initialized yet.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <1252930816-7672-1-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Fix uaccess_32.h typo

Trivial: correct "that the we don't" typo.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
LKML-Reference: <20090917125401.GU3717@localdomain.by>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Trivial whitespace cleanups

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alok N Kataria <akataria@vmware.com>
Cc: "Tan Wei Chong" <wei.chong.tan@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, apic: Fix missed handling of discrete apics

In case of discrete (pretty old) apics we may have cpu_has_apic bit
not set but have to check if smp_found_config (MP spec) is there
and apic was not disabled.

Also don't forget to print apic/io-apic for such case as well.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090915071230.GA10604@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/i386: Remove duplicated #include

Remove duplicated #include in:

  arch/x86/kernel/cpu/common.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

kernel/profile.c: Switch /proc/irq/prof_cpu_mask to seq_file

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, mtrr: Convert loop to a while based construct, avoid naked semicolon

Perhaps this is a more readable/standard form.

Signed-off-by: Joe Perches <joe@perches.com>
LKML-Reference: <1252945687.3937.14.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

sched: Fix raciness in runqueue_is_locked()

runqueue_is_locked() is unavoidably racy due to a poor interface design.
It does

cpu = get_cpu()
ret = some_perpcu_thing(cpu);
put_cpu(cpu);
return ret;

Its return value is unreliable.

Fix.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <200909191855.n8JItiko022148@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: x86: Fix PMU resource leak

Dave noticed that we leak the PMU resource reservations when we
fail the hardware counter init.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
LKML-Reference: <1252483487.7746.164.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf util: SVG performance improvements

Tweak the output SVG to increase performance in SVG viewers by
limiting the different types of font sizes and by smarter
transformations on the text.

At least with Inkscape this gives a notable performance improvement
during zoom and scrolling.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181438.3a49cb93@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf util: Make the timechart SVG width dynamic

This patch adds a command line option for timechart that allows the
user to specify the width of the SVG file.

This patch also makes sure that each second of recording has at
least 200 units (pixels at 96 DPI) of width.  This impacts
recordings longer than 5 seconds; recordings shorter than 5 second
will scale up to have a width of 1000 units for the whole recording
(as before).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181416.69570c5d@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf timechart: Show the duration of scheduler delays in the SVG

Given that scheduler latencies are the hot thing nowadays, show the
duration of said latencies in the SVG in text form.

In addition, if the latency is more than 10 msec, pick a brighter
yellow color as a way to point these long delays out.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181353.796f4509@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf timechart: Show the name of the waker/wakee in timechart

Timechart currently shows thin green lines for sending or receiving
wakeups. This patch also prints (in a very small font) the name of
the process that is being woken/wakes up this process.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090920181328.68baa978@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

tracing: Export trace_profile_buf symbols

ERROR: "trace_profile_buf_nmi" [fs/jbd2/jbd2.ko] undefined!
ERROR: "trace_profile_buf" [fs/jbd2/jbd2.ko] undefined!
ERROR: "trace_profile_buf_nmi" [fs/ext4/ext4.ko] undefined!
ERROR: "trace_profile_buf" [fs/ext4/ext4.ko] undefined!
ERROR: "trace_profile_buf_nmi" [arch/x86/kvm/kvm.ko] undefined!
ERROR: "trace_profile_buf" [arch/x86/kvm/kvm.ko] undefined!

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1253442878.7542.3.camel@laptop>
[ fixed whitespace noise and checkpatch complaint ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

includecheck fix: x86, cpu/common.c

fix the following 'make includecheck' warning:

  arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1252087783.6385.10.camel@ht.satnam>

includecheck fix: kernel/trace, ring_buffer.c

fix the following 'make includecheck' warning:

  kernel/trace/ring_buffer.c: trace.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068617.4382.107.camel@ht.satnam>

includecheck fix: include/linux, ftrace.h

fix the following 'make includecheck' warning:

  include/linux/ftrace.h: linux/sched.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068321.4382.102.camel@ht.satnam>

includecheck fix: include/linux, page_cgroup.h

fix the following 'make includecheck' warning:

  include/linux/page_cgroup.h: linux/swap.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>

includecheck fix: include/linux, aio.h

fix the following 'make includecheck' warning:

  include/linux/aio.h: linux/aio_abi.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: bcrl@kvack.org
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068254.4382.101.camel@ht.satnam>