iio: resistance: Document that resistance can be output

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: lidar: add missing MODULE_DEVICE_TABLE for dt

The device tree compatible strings weren't properly
registered for the pulsedlight-lidar-lite-v2 driver.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: chemical: vz89x hardware i2c workaround

Chipset sometime updates in the middle of a reading causing it
to reset the data pointer, and causing invalid reading of previous data.

We can check for this invalid state by reading MSB of the resistance
reading that is always zero, and by also confirming the VOC_short isn't
zero.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: dac: ad5504: leave sysfs naming to the core

This shouldn't actually change anything since the core calls the events
sysfs folder "events" anyways.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: max1363: leave sysfs naming to the core

This shouldn't actually change anything since the core calls the events
sysfs folder "events" anyways.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: ad799x: leave sysfs naming to the core

This shouldn't change anything since the core calls the events folder
"events" anyways.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Staging: iio: cdc: Remove unnecessary dev_info

Remove dev_info as the information can be obtained by other means

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Staging: iio: cdc: Prefer using the BIT macro

Replace bit shifting on 1 with the BIT(x) macro

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: iio_dummy_evgen: handle_simple_irq() build fix

handle_simple_irq() has dropped the first parameter, so fix it up in the
iio_dummy_evgen.c driver to prevent the build from breaking.

Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.4a' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle

New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors

New core functionality
* triggered events - use triggers to check for changes in threshold type
  detectors on devices with out interrupt support.  First user is the holt
  comparator.
* chemical concentration and resistance channel types.

New driver functionality
* vf610
  - buffer support.
  - followup coccinelle warning fix.

Core rework
* buffers
  - break out callback buffer to own module.
  - move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
  rather than giving a missleading error later on.

Cleanups
* adddac drivers
  - use BIT macro where appropriate.
* meter drivers
  - use BIT macro where appropriate.

* ad7303
 - add an OF match table to line up with the binding docs.
* adc128s052
  - add an OF match table to line up with the binding docs.
* adf4350
  - add an OF match table to line up with the binding docs
* as3935
  - add an OF match table to line up with the binding docs.
* berlin2-adc
  - use GENMASK and BIT for masks
  - prevent attempting to sample multiple channels at once by moving a
    mutex scop
  - coding style cleanups
* bmg150_magn
  - kconfig sort order was wrong - fix it.
* bmg160
  - use i2c regmap and drop all uses of i2c_client
  - separate i2c and core driver
* cc10001_adc
  - kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
  - move interrupt generation to irq_work to reduce differences between
    the dummy driver and real hardware drivers.
* hmc5843
  - set the name dynamically rather than to a fixed value for one of the
    suported parts.
  - export module alias information to allow autoprobing of module.
* lpc32xx
  - on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
  - set .of_match_table to actually allow OF style matching.
* max5821
  - add MODULE_DEVICE_TABLE for OF table.
* mma8452
  - refactor to separate out chip specific data.
  - add freefall / motion interrupt source for devices that do their
    interrupts slightly differently.
  - update copywrite notice.
  - leave naming of events directory in sysfs to the core
* mcp320x
  - set .of_match_table so that it can be use for OF style matching.
* mlx90614
  - Implement filter configuration (note the datasheet changed as a result
    of the driver reviews to include the values we needed ;)
* opt3001
  - drop .owner field as assigned by platform driver core.
* si7020
  - replace a bitmask on the humidity values with a more correct range
    check.
* stk310
  - improved error handling.
  - use BIT macro where appropriate and use the resulting defines
    instead of magic numbers in the code.
  - fix indentation
* st-sensors
  - add debugfs register read hook
* tsl4531
  - fix error handling in check_id
* twl6030
  - fix module autoload for OF
* iio-trig-sysfs
  - document add and remove attribute
* trigger in staging
  - code alignment fixes.
  - braces on both branches of if statement if needed for one.
* xilinx-xadc
  - push interrupts into hardirq context as there isn't much in them
    any more and it avoids breaking PREEMPT_RT builds due to the use
    of a spinlock between the hardirq and the thread.

Tools
* event-monitor
  - report unsupported events.  We keep expanding what can come from drivers
    so give a helpful error if one turns up in an out of date userspace
    program.
* generic-buffer
  - helpful message about needing to enable a channel to start the buffer.

staging/lustre: Remove ccc_transient_page_* methods

All of them but the ccc_transient_page_prep are unused, so remove
the unused ones.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused ccc_io_fini()

Does not appear to be used anywhere.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove ccc_attr/conf_set()

These seem to be unused.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove server-only recovery-related bits

This patch is a first stab at trying to remove structure fields
from obd_export and obd structures that are only used on the
server or make sense on the server. These include tracking
requests in recovery, various recovery stages, lists of
recovered and not yet recovered clients and so on.
Also prune functions that use these fields.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Remove unused nid_hash

nid_hash is used on export to faster find clients based on
their NID. There's no use for that on the client.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: Remove unused struct lu_server_seq

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: Get rid of lcs_srv in lu_client_seq

Since we know lcs_srv is always NULL, just get rid of it completely
and fix up all the code to assumee it was never there.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: Remove unused seq_client_get_seq function

Also while we are at it, remove seq_site_fini forward declaration
as there's no such function anymore.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: seq_client_init/fini don't need to be exported

In fact they could be static as they are only used inside
this file, so remove EXPORT_SYMBOL and declarations.
Also seq_client_init is always called with srv = NULL, so just
drop this argument.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fid: Remove server fid function declarations

Those functions are not present anywhere in the client code.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove lots of dead code

This is a large patch to remove all dead code from obdclass and
ptlrpc, purely removing functions and declarations now, so
despite the size should be easy enough to verify.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Drop unused obdo_from_la() and la_from_obdo()

They are no longer used anywhere.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: secure wrapping code cleanup

Drop unused functions.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Drop unused client code

These client request/import functions are not used anywhere,
so drop them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Drop unused code from obdo.c

These functions are not even referenced in any header files anymore.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused function server_name2svname()

All users are only in the server code

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused function class_handle_hash_back()

No callers left.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Remove unused functions from genops.c

These functions are mostly used on the server.

class_uuid2obd, get_devices_count, class_obd_list, class_conn2obd,
class_conn2cliimp, class_connected_export, obd_exports_barrier,
kuc_* (kernel-userspace communications).

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: Remove unused round_timeout function

It's not referenced anywhere anymore.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused lu_object functions.

Quite a bunch of them are only used on the server.
lu_object_put_nocache, lu_object_invariant, lu_dev_del_linkage,
lu_context_tags_update, lu_context_tags_clear, lu_session_tags_update,
lu_session_tags_clear, lu_env_refill_by_tags, lu_printk_printer,
lu_object_assign_fid, lu_object_anon, lu_buf_free, lu_buf_alloc,
lu_buf_realloc, lu_buf_check_and_alloc, lu_buf_check_and_grow

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused functions and definitions from cl_object

cl_object_header_fini, cl_object_has_locks, cl_attr2lvb,
cl_page_list_own, cl_page_list_unmap, cl_2queue_assume,
cl_io_print, cl_enqueue,
also cleanup extern declarations in cl_object.h

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused ptlrpcd_add_rqset()

No point in retaining it if it's unused.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused statfs_pack()

It's only used on the server.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove high-priority request callbacks

This function is only used on the server where real high-priority
requests actually exist.
This deletes ptlrpc_hpreq_handler() and ptlrpc_request_change_export()

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused reply state batches code

rs_batch is used on the server only.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused req_capsule_server_grow

It's only used on the server

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Remove server-specific health checks

ptlrpc_service_health_check is only used on a service, so
it makes no point to retain it in the client code.
Also removing it's helpers: ptlrpc_svcpt_health_check and
ptlrpc_nrs_req_peek_nolock

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused lustre_acl_xattr_merge2posix()

Apparently this is only used only on the metadata server.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused target_print_req()

This is a server-side request printing function, so we don't
really need it on the client.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Use module_i2c_driver

Macro module_i2c_driver is used for drivers whose init
and exit paths does only register and unregister to i2c
API. Remove some boilerplate code by using module_i2c_driver.

Problem found using Coccinelle.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: remove unused code

Code after a return will never run, removing this dead code.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove dead code

Remove the code enclosed in '#if 0'

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove dead code

The while() loop will only exit in a return or a goto ask_for_joinbss,
which means it will never break and execute the return after it.
Removing return _FAIL since it is dead code.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl819u: Fix brace styling issues

This is a patch to correct two flavors of brace styling issues in
ieee80211_softmac_wx.c.

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: spaces required around = operator

This is a patch to add spaces around = operators in several instances
in ieee80211_softmac_wx.c

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: add spaces around == and || operators

This is a patch to add missing spaces around == and || operators in one
instance in ieee80211_softmac_wx.c.

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: move open braces to previous lines

This is a patch to move opening braces to the lines on which their
corresponding if-statements exist in ieee80211_softmac_wx.c.

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: add missing blank lines after declarations

This is a patch to add blank lines after declaration ins several
instances in iee80211_softmac_wx.c.

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: space required after ','

This is a fix to add spaces after commas in ieee80211_softmac_wx.c.

Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix resource leak

Firmware was not released properly if kmemdup fails.

Addresses-Coverity-Id: 1269118
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Fix build error when CFG80211 is not selected

The kbuild test robot reports the following build error for
i386-randconfig-c0-09230740:

>> ERROR: "ieee80211_hdrlen" [drivers/staging/rtl8188eu/r8188eu.ko] undefined!

Add a dependency on CFG80211 to fix it.

Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: issue_action_BA(): extract ADDBA_req pointer

pmlmeinfo->ADDBA_req is accessed three times in this function, but it
contributes to generating lines above 80 characters that are not easy to
split in a nice way.

Extract a pointer to it to make code slightly more concise and fix some
lines over 80 characters.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: don't cast when calling rtw_set_fixed_ie()

The 'pbuf' and 'source' arguments to rtw_set_fixed_ie() are (void *), the
explicit typecasts are not needed. They just make code less readable.

Also fix checkpatch issues in the lines touched:
  ERROR: space prohibited before that ',' (ctx:WxW)
  WARNING: line over 80 characters
  CHECK: Unnecessary parentheses around <var>

Note: some of the modified lines are still over 80 characters because they
are not fixable by just adding newlines. They will be fixed in a later
patch.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_set_fixed_ie(): accept void* parameters

rtw_set_ie() is a memcpy-like function, taking addresses of memory buffers
among its parameters. Similarly to memcpy, change the parameters to be
void*. This will allow to get rid of typecasts whenever it is called.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove useless comment

This comment gives pretty much the same information as the name of the
function that it immediately precedes.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Merge/Remove _rtl92e_dm_bb_initialgain_backup

Merge rtl92e_dm_backup_state and _rtl92e_dm_bb_initialgain_backup.
Static function is called only once and dm_backup_state had short body.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Simplify _rtl92e_calculate_bit_shift

Use ffs instead of iteration. Behaviour of function doesn't change.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove extra braces

Remove extra braces in _rtl92e_dm_check_tx_power_tracking_thermal.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove _rtl92e_dm_check_pbc_gpio

Function is empty.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove _rtl92e_silent_reset_mesh

Function is empty.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix FSF_MAILING_ADDRESS warnings

Remove FSF address from licenses at the beginning of files.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix CONSTANT_COMPARISON warnings

Remove yoda conditions where pointed by checkpatch.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix SUSPECT_CODE_INDENT warnings

Fix SUSPECT_CODE_INDENT warnings (indentation).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl_wx: Fix BRACES warning

Fix checkpatch BRACES warning.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Fixed uintX_t CHECK checkpatch warnings

Replaced all uses of uintX_t types to uX types, to be
checkpatch clean.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Moved kernel-doc comments to .c files

Moved kernel-doc comments for non-inline functions
from header files to .c files.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: up-rev dprc binary interface to v4.0

Add cmd_flags parameter to all dprc APIs to comply
with the dprc 4.0 MC interface. Updated MC version
major number.  Pass irq args in struct instead of
separate args.

dprc 4.0 uses MC-relative offsets to specify object regions,
instead of physical addresses. So, translate_mc_addr() and
struct fsl_mc_addr_translation_range need to be updated
accordingly.

Update commands for 4.0: add new commands 'set/get
obj irq', 'set obj label', 'get obj descriptor'.
Remove 'get portal paddr'.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: up-rev dpcon binary interface to v2.0

dpcon object minor version number updated to match latest
MC firmware. This change is needed because the dpcon
object binds to the allocator and the current driver match
logic uses object version numbers.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: up-rev dpmcp binary interface to v2.0

Add cmd_flags parameter to all dpbp APIs to comply
with the dpmcp 2.0 MC interface. Updated version
major number. Pass irq args in struct instead of
separate args.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: up-rev dpbp binary interface to v2.0

Add cmd_flags parameter to all dpbp APIs to comply
with the dpbp 2.0 MC interface. Updated MC version
major number. Pass irq args in struct instead of
separate args.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: uprev dpmng binary interface to v8.0

Add cmd_flags parameter to all dpmng APIs to comply
with 8.0 MC firmware interface. Updated MC version
major number.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Add new flags field to MC command header

The Management Complex (MC) binary interface added a new "flags"
field to the command header.
Add the definitions for this field in preparation for adding the
new cmd_flags parameter to all MC interface APIs.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Fix checkpatch block comments warnings

This patch is intended to fix the checkpatch warning for ``block``
comments for staging/android driver.

Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove RX complete locking.

The lock in vnt_submit_rx_urb_complete is blocked by TX activity.

The lock comes from a time when RX needed to be synchronized with
other parts of the driver because the WLAN API was in driver.

Since this is now dealt with in mac80211 the lock is unnecessary.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: don't stop TX queue unless buffer full.

Presently the TX buffer stops while filling the buffer and urb.

However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.

Only stop the queue when the buffer becomes full. The
URB complete will start the queue again when a
buffer and URB is available.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: implement power saving.

The device can now operate in low power mode

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: implement power saving code.

The device should ready to listen to next beacon so on count down of
wake_up_count == 1.

schedule command WLAN_CMD_TBTT_WAKEUP which calls vnt_next_tbtt_wakeup which
wakes the device.

This restores this back to vendors code with a slight difference the
count down is in the interrupt handler.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: implement TSF counter

The TSF counter is presently unused on driver in infrastructure mode.

It is needed to implement power saving functions and wireless stats that
are passed in interrupt handling.

Ensuring counter is synced with access point beacon.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: don't stop TX queue unless buffer full.

Presently the TX buffer stops while filling the buffer.

However, this does not make use of the available buffer
space, it also lags the speed of the TX troughtput.

Only stop the queue when the buffer becomes full. The
Interupt handler will start the queue again when a
buffer is available.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng remove unnessecary variable

The result variable is not set anywhere beyond its initialization,
therefore it can be remove.

Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng remove redundant conditional

We exit the above loop either if curroff >= (HFA384x_PDA_LEN_MAX / 2 - 1)
or if we found the END marker in the element beyond the current one. The
first case is checked for in the preceding if statement, therefore the
second if statement is redundant and can be removed.

Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng fix buffer overflow in firmware handling

We test for an END marker in the element beyond the current one, this
effectively limits the size of the array to be HFA384x_PDA_LEN_MAX/2 - 1
not HFA384x_PDR_END_OF_PDA/2. This patch fixes a possible buffer
overflow in case there was no END marker.

Signed-off-by: Tillmann Heidsieck <theidsieck@leenox.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace twoToPowerOfx with shift operator

The function twoToPowerOfx that iteratively calculates the power of 2
may be replaced with shift operator

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused MB(x) and KB(x) macros

The MB(x) and KB(x) macros are not used and therefore they can be
removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace custom MB(x) macro with appropriate SZ_xM

Use SZ_xM defined in linux/sizes.h instead of custom MB(x) macro

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: tidy up #include directives

Add space between '#include' keyword and the header name

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: sm750_help.h: spacing fix

Remove unnecessary space in sm750_help.h to fix the following
checkpatch.pl error:
drivers/staging/sm750fb/sm750_help.h:46: space prohibited after that '~' (ctx:ExW)

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: fix returned errno code in dgap_parsefile()

The driver is using -1 instead of the -ENOMEM defined macro to specify
that a buffer allocation failed. Since the error number is propagated,
the caller will get a -EPERM which is the wrong error condition.

Also, the smatch tool complains with the following warning:

dgap_parsefile() warn: returning -1 instead of -ENOMEM is sloppy

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wicl1000: remove duplicated operand in OR operation

The IEEE80211_STYPE_PROBE_REQ flag appears twice in the expression
and coccicheck complains with:

wilc_wfi_cfgoperations.h:80:3-38: duplicated argument to & or |

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Add s-Par visorhba

This driver create a host bus adapter device when s-Par sends a
device create message to create a storage adapter on the visorbus.
When the message is received by visorbus, the visorhba_probe function
is called and the hba device is created and managed by the visorhba
driver.

Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: partially use time64_t for capa expiry

Here, we actually have a problem in 2038 or at the latest in 2106 when
the lc_expiry variable on the wire protocol overflows, including on
64-bit architectures.

Now that the actual code was removed, only on-the wire structure
is left so we add in a y2038 warning to remind whoever gets to
implement it again about this problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove mds/ost capabilities support

Client capabilities is an outdated feature that never worked properly,
so let's get rid of the client support since modern servers
don't have this support either.

The patch is big, but since it just removes one large feature,
so it's hopefully easy to verify.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused debugfs/procfs helpers

These particular helpers are unused so let's get rid of them:
ldebugfs_add_symlink, lprocfs_rd_u64, lprocfs_rd_atomic,
lprocfs_wr_atomic, lprocfs_rd_name, lprocfs_seq_read_frac_helper

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused lprocfs_init_ldlm_stats

This is unused anywhere in the client code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused lprocfs_alloc/free_md_stats

This code is not called anywhere in the current client code,
so we can remove it.
Also remove a helper function lprocfs_init_mps_stats

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Remove unused lprocfs_alloc/free_obd_stats

obd_stats in the form present were only used on the server,
so let's remove them from the client code
This also removes lprocfs_init_ops_stats helper.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove dt_object implementation

Nothing uses dt_object now, so we can kill the implementation
and the stale references.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llog: remove unused server code

Most of the code in llog.c and llog_cat.c is completely unused
on the client and can be removed, as a preparation for removing
the dt_object code.

Two tricky parts are:

 - In llog_cat_close(), we rely on the fact that llh_flags never
   contains LLOG_F_ZAP_WHEN_EMPTY, because nobody ever sets that
   flag.

 - In llog_read_header(), we check the return value of the lpi_cb
   callback, and again we know that it cannot be LLOG_PROC_BREAK
   or LLOG_DEL_RECORD and can remove the respective code path.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove obd_export_evict_by_nid/uuid

These functions only make sense on the server.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: Remove unused lprocfs_wr_evict_client

This is only used on the servers to evict clients.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>