Hauke Mehrtens [Mon, 28 Apr 2014 21:40:09 +0000 (21:40 +0000)]
kernel: deactivate fs cache config option
r40587 added some kernel config options, on which these two ones depend.
This fixes the build of the buildbots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40588
Zoltan Herpai [Mon, 28 Apr 2014 19:47:38 +0000 (19:47 +0000)]
fs: add kernel modules for AFS client
- add/separate crypto modules
- add fscache support
- add rxrpc module which is required for AFS
- add afs module
Signed-Off-By: Nathaniel Wesley Filardo <8S9K8UGO5JGPI3U067229BBACKMQIGVH@cmx.ietfng.org>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40587
Felix Fietkau [Mon, 28 Apr 2014 16:35:25 +0000 (16:35 +0000)]
ath9k: add a fix for tx queueing and aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40586
Zoltan Herpai [Mon, 28 Apr 2014 07:43:29 +0000 (07:43 +0000)]
mxs: enable usbgadget feature for Duckbills
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40585
Hauke Mehrtens [Sun, 27 Apr 2014 21:53:58 +0000 (21:53 +0000)]
mac80211: Fix build errors due to missing string function declarations
Building mac80211 failed, due to missing function declarations in compat/backport-3.15.c
This patch adds the linux/string.h header file to provide these function declarations
Signed-off-by: Maarten Bezemer <maarten.bezemer@gmail.com>
SVN-Revision: 40584
Hauke Mehrtens [Sun, 27 Apr 2014 20:49:14 +0000 (20:49 +0000)]
authsae: Update to latest version
Ping tested, add a cool fix
https://github.com/cozybit/authsae/commit/
295164a83717ce59ca280468fc2f7edcea6b3cbf
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 40579
Felix Fietkau [Sun, 27 Apr 2014 18:48:57 +0000 (18:48 +0000)]
base-files: remove duplicate stop_service() function.
It was introduced in commit
2f966e8, "base-files: add a post start hook
for procd managed services".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40576
Felix Fietkau [Sun, 27 Apr 2014 18:30:50 +0000 (18:30 +0000)]
hostapd: fix eglibc 2.15 support
This patch fixes compilation failure for hostapd when using eglibc 2.15.
Signed-off-by: Zachery Stoddard <zacherystoddard@gmail.com>
SVN-Revision: 40575
Felix Fietkau [Sun, 27 Apr 2014 14:39:06 +0000 (14:39 +0000)]
ath9k: add ANI fix for ar913x to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40573
Felix Fietkau [Sat, 26 Apr 2014 19:48:11 +0000 (19:48 +0000)]
netifd: update to the latest version, fixes some route table and dynamic interface issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40572
Felix Fietkau [Sat, 26 Apr 2014 19:48:06 +0000 (19:48 +0000)]
hostapd: update to version 2014-04-24, fixes some dfs related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40571
Felix Fietkau [Sat, 26 Apr 2014 14:56:29 +0000 (14:56 +0000)]
libubox: update to the latest version, adds a key/value store implementation and fixes an uloop issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40570
Felix Fietkau [Thu, 24 Apr 2014 19:41:57 +0000 (19:41 +0000)]
build: clarify the file prereq check message
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40569
Felix Fietkau [Thu, 24 Apr 2014 19:28:11 +0000 (19:28 +0000)]
build: add a prereq check for file (#15692)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40568
Steven Barth [Thu, 24 Apr 2014 09:36:01 +0000 (09:36 +0000)]
odhcpd: better dhcpv6 client-compatibility (thanks Hans Dedecker)
SVN-Revision: 40567
Steven Barth [Thu, 24 Apr 2014 09:11:44 +0000 (09:11 +0000)]
6rd: Select first IPv4 address from configured tunlink interface as local tunnel address
Gives the user the control to select the correct WAN IPv4 address to be used by the 6rd tunnel when mutiple WAN interfaces are configured
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 40566
Hauke Mehrtens [Wed, 23 Apr 2014 22:02:18 +0000 (22:02 +0000)]
bcm53xx: add default config for switch
This scripts adds a default config for the switch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40565
Hauke Mehrtens [Wed, 23 Apr 2014 21:53:50 +0000 (21:53 +0000)]
bcm53xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40564
John Crispin [Wed, 23 Apr 2014 07:52:56 +0000 (07:52 +0000)]
ralink: add dir-645 to the eeprom hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40561
John Crispin [Wed, 23 Apr 2014 07:52:47 +0000 (07:52 +0000)]
mac80211: allow to select the rt2x00-soc module for the ramips/rt3883 subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40560
John Crispin [Wed, 23 Apr 2014 07:52:37 +0000 (07:52 +0000)]
mac80211: refresh rt2x00 patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40559
John Crispin [Wed, 23 Apr 2014 07:52:18 +0000 (07:52 +0000)]
mac80211: rt2x00: add support for the RT3662/RT3883 SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40558
John Crispin [Wed, 23 Apr 2014 07:51:57 +0000 (07:51 +0000)]
ramips: register clock device for the WMAC on RT3883
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40557
Felix Fietkau [Tue, 22 Apr 2014 17:28:14 +0000 (17:28 +0000)]
netifd: update to latest version, adds support for disabling interfaces
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40555
John Crispin [Tue, 22 Apr 2014 08:08:51 +0000 (08:08 +0000)]
ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
SVN-Revision: 40554
John Crispin [Tue, 22 Apr 2014 08:08:46 +0000 (08:08 +0000)]
lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40553
John Crispin [Tue, 22 Apr 2014 08:08:42 +0000 (08:08 +0000)]
ramips: build factory-compatible image for AR725W
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40552
John Crispin [Tue, 22 Apr 2014 08:08:39 +0000 (08:08 +0000)]
firmware-utils: add Gemtek header tool
Generates webflash-compatible images for a few RT2880 routers based
on Gemtek OEM boards.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40551
John Crispin [Tue, 22 Apr 2014 08:08:35 +0000 (08:08 +0000)]
ramips: add Airlink101 AR725W userland support
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40550
John Crispin [Tue, 22 Apr 2014 08:08:31 +0000 (08:08 +0000)]
ramips: Add Airlink101 AR725W board support
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40549
John Crispin [Tue, 22 Apr 2014 08:08:27 +0000 (08:08 +0000)]
Add Zyxel P-2812HNU-Fx images
P-2812HNU-Fx images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40548
John Crispin [Tue, 22 Apr 2014 08:08:23 +0000 (08:08 +0000)]
Add Fritz!Box 3370 images
Fritz!Box 3370 images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40547
John Crispin [Tue, 22 Apr 2014 08:08:19 +0000 (08:08 +0000)]
Refresh patches
Refresh uboot-lantiq patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40546
John Crispin [Tue, 22 Apr 2014 08:08:15 +0000 (08:08 +0000)]
Create firmware directory if it doesn't exist
Fixes package refreshing.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40545
John Crispin [Tue, 22 Apr 2014 08:08:10 +0000 (08:08 +0000)]
Depend on lantiq board
Depend on lantiq board.
ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40544
John Crispin [Tue, 22 Apr 2014 08:08:06 +0000 (08:08 +0000)]
Fix vr9_phy22f_a2x.bin firmware linking
vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40543
John Crispin [Tue, 22 Apr 2014 08:08:02 +0000 (08:08 +0000)]
linux/generic: add MIB counters and port status to ADM6996 switch
This patch adds port status information and MIB counters to the ADM6996
switch driver.
The driver supports also the older ADM6996L-variant, but I'm not able to
test this patch on that chip. According to the datasheet the same
registers exist there as well, so I think it should work, but any
feedback is appreciated.
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40542
John Crispin [Tue, 22 Apr 2014 08:07:53 +0000 (08:07 +0000)]
lantiq: fix maximum ethernet header length
The total ethernet frame length should be written to the hardware
register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This
patch fixes network issues on various Danube boards, especially when
VLAN tagging is enabled.
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40541
Zoltan Herpai [Mon, 21 Apr 2014 18:16:03 +0000 (18:16 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40540
Zoltan Herpai [Mon, 21 Apr 2014 18:14:17 +0000 (18:14 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40539
Zoltan Herpai [Mon, 21 Apr 2014 18:13:19 +0000 (18:13 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40538
Luka Perkov [Sat, 19 Apr 2014 21:39:12 +0000 (21:39 +0000)]
scons: upgrade to 2.3.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40535
Luka Perkov [Sat, 19 Apr 2014 21:39:11 +0000 (21:39 +0000)]
mpc: upgrade to 1.0.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40534
Luka Perkov [Sat, 19 Apr 2014 21:39:10 +0000 (21:39 +0000)]
flex: upgrade to version 2.5.39
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40533
Luka Perkov [Sat, 19 Apr 2014 21:39:09 +0000 (21:39 +0000)]
kobs-ng: Add support for overriding size
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams.
This patch allows overriding that size in order to reserve space at the end
of the mtd partition for u-boot.img in the case of using an SPL bootloader.
For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000
(14MB) offset in a 16MB /dev/mtd0:
kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL
nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40532
Luka Perkov [Sat, 19 Apr 2014 21:39:04 +0000 (21:39 +0000)]
imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40531
Felix Fietkau [Sat, 19 Apr 2014 17:26:11 +0000 (17:26 +0000)]
feeds.conf.default: the telephony feed is now on git.openwrt.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40530
Felix Fietkau [Sat, 19 Apr 2014 09:58:40 +0000 (09:58 +0000)]
netifd: update to the latest version, fixes some more issues related to l3_dev handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40529
Felix Fietkau [Fri, 18 Apr 2014 17:27:38 +0000 (17:27 +0000)]
base-files: remove duplicate wps button handler (#15621)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40528
Felix Fietkau [Fri, 18 Apr 2014 14:58:01 +0000 (14:58 +0000)]
build: reimplement package build directory override
Remove leftover pieces from package-version-override.mk support
Add a new variable USE_SOURCE_DIR to use a custom build directory.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40527
Jo-Philipp Wich [Thu, 17 Apr 2014 17:59:47 +0000 (17:59 +0000)]
fstools: fix extroot with opkg-installed block-mount (#15550)
The /sbin/block binary now requires and additional shared library, therfore set
LD_LIBRARY_PATH accordingly when invoking it from the temporary overlay.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40526
John Crispin [Wed, 16 Apr 2014 12:11:24 +0000 (12:11 +0000)]
lantiq: remove uboot lzma patch, apparently its not needed after all
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40521
John Crispin [Wed, 16 Apr 2014 12:01:24 +0000 (12:01 +0000)]
uboot-lantiq: backport lzma fix
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40520
John Crispin [Wed, 16 Apr 2014 12:01:09 +0000 (12:01 +0000)]
lantiq: ARV7519RW22: several fixes
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40519
Zoltan Herpai [Mon, 14 Apr 2014 21:36:39 +0000 (21:36 +0000)]
sunxi: remove mainlined patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40512
Steven Barth [Mon, 14 Apr 2014 10:11:54 +0000 (10:11 +0000)]
ds-lite: disable NAT according to RFC 7084
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 40511
Steven Barth [Mon, 14 Apr 2014 10:11:34 +0000 (10:11 +0000)]
firewall: add support for nat-rules and netifd-proto-originating rules
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 40510
Gabor Juhos [Sun, 13 Apr 2014 20:41:52 +0000 (20:41 +0000)]
ar71xx: rb91x: fix ethernet packet loss issues
The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.
Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40509
Gabor Juhos [Sun, 13 Apr 2014 20:41:51 +0000 (20:41 +0000)]
ar71xx/mikrotik: enable the AT803x PHY driver
It will be used on the RB91x boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40508
Gabor Juhos [Sun, 13 Apr 2014 20:41:50 +0000 (20:41 +0000)]
ar71xx: allow to configure AR803x PHYs via platform data
Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40507
Gabor Juhos [Sun, 13 Apr 2014 20:41:48 +0000 (20:41 +0000)]
ar71xx: add phy_mmd_{read,write} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40506
Gabor Juhos [Sun, 13 Apr 2014 20:41:42 +0000 (20:41 +0000)]
ar71xx: enable console on the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40505
John Crispin [Sun, 13 Apr 2014 18:01:08 +0000 (18:01 +0000)]
ralink: add port_init for rt2880
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40504
Felix Fietkau [Sun, 13 Apr 2014 09:53:51 +0000 (09:53 +0000)]
iw: sync nl80211.h (fixes settting antenna_gain)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40503
Gabor Juhos [Sun, 13 Apr 2014 08:29:09 +0000 (08:29 +0000)]
ar71xx: add profile and build image for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: remove the non-existing zyxelnand subtarget specific stuff]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40502
Gabor Juhos [Sun, 13 Apr 2014 08:29:08 +0000 (08:29 +0000)]
uboot-envtools: add support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40501
Gabor Juhos [Sun, 13 Apr 2014 08:29:07 +0000 (08:29 +0000)]
ar71xx: add user-space support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40500
Gabor Juhos [Sun, 13 Apr 2014 08:29:05 +0000 (08:29 +0000)]
ar71xx: add kernel support for ZyXEL NBG 6716
With this patch OpenWRT supports the following on the ZyXEL NBG 6716:
-WiFi 2G (ath9k)
-WiFi 5G (ath10k)
-NAND flash
-2 Ethernet interfaces
-USB 2.0
-LEDs including switch
-reasonale defaults at first boot
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg:
- rename and refresh kernel patch,
- fix a few typos,
- change button key codes,
- use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40499
John Crispin [Sat, 12 Apr 2014 21:22:21 +0000 (21:22 +0000)]
lantiq: enable switch on td8970
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40498
John Crispin [Sat, 12 Apr 2014 21:22:17 +0000 (21:22 +0000)]
802.11s: fix authsae support in netifd
This patch implements support for 802.11s protected mesh wireless networks (using authsae) in the netifd framework.
Until meshd-nl80211 implements a proper -P option for the PID file, this uses shell backgrounding in order to be able to get the PID for the process.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 40497
John Crispin [Sat, 12 Apr 2014 21:22:12 +0000 (21:22 +0000)]
rpcd: update to the latest version
This is required to make object "session" procedure "access" dump ACLs
when no "object" or no "function" parameters are passed.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40496
John Crispin [Sat, 12 Apr 2014 21:22:08 +0000 (21:22 +0000)]
Fix ARV7519RW images
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40495
John Crispin [Sat, 12 Apr 2014 21:22:04 +0000 (21:22 +0000)]
Fix Asus rt-n15 board support
* gpio leds and buttons
* ethernet
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40494
John Crispin [Sat, 12 Apr 2014 21:22:00 +0000 (21:22 +0000)]
rt2880 DT fixes
* add pinctrl
* fix ethernet port
* make wifi available by default
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40493
John Crispin [Sat, 12 Apr 2014 21:21:56 +0000 (21:21 +0000)]
Fix pinmux-rt2880
The last arg to FUNC() is count, not last pin.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40492
John Crispin [Sat, 12 Apr 2014 21:21:53 +0000 (21:21 +0000)]
Add wmac clock for rt2880
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40491
John Crispin [Sat, 12 Apr 2014 21:21:49 +0000 (21:21 +0000)]
sparse: add as a new package selectable from the config
This change does multiple things, all related to enable sparse usage as
a static analysis tool selectable from the OpenWrt configuration:
*add a KERNEL_SPARSE option in the config to add sparse to the kernel
build (through the C=1 option usage)
*add sparse as a new host tools. It will get selected automatically when
the above option will be enabled
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40490
John Crispin [Sat, 12 Apr 2014 21:21:44 +0000 (21:21 +0000)]
Don't try to generate whr-g300n image if it's going to be more than 4M
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40489
John Crispin [Sat, 12 Apr 2014 21:21:40 +0000 (21:21 +0000)]
uboot-lantiq: enable parallel building
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40488
John Crispin [Sat, 12 Apr 2014 21:21:35 +0000 (21:21 +0000)]
uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40487
John Crispin [Sat, 12 Apr 2014 21:21:31 +0000 (21:21 +0000)]
uboot-lantiq: add packages for AudioCodes MP-252
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40486
John Crispin [Sat, 12 Apr 2014 21:21:26 +0000 (21:21 +0000)]
uboot-lantiq: add packages for various Arcadyan boards
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40485
John Crispin [Sat, 12 Apr 2014 21:21:23 +0000 (21:21 +0000)]
uboot-lantiq: add packages for Lantiq EASY80920
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40484
John Crispin [Sat, 12 Apr 2014 21:21:18 +0000 (21:21 +0000)]
uboot-lantiq: add packages for Lantiq EASY50712
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40483
John Crispin [Sat, 12 Apr 2014 21:21:14 +0000 (21:21 +0000)]
uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40482
Gabor Juhos [Sat, 12 Apr 2014 20:22:41 +0000 (20:22 +0000)]
ar71xx: build firmware image for the WNDR3700 v4 board
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40481
Gabor Juhos [Sat, 12 Apr 2014 20:00:37 +0000 (20:00 +0000)]
ar71xx/image: allow to use more arguments for some macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40480
Gabor Juhos [Sat, 12 Apr 2014 19:58:23 +0000 (19:58 +0000)]
ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files
Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300
is the same device. Indicate this in the kernel files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40479
Gabor Juhos [Sat, 12 Apr 2014 19:58:20 +0000 (19:58 +0000)]
ar71xx: wndr4300: enable 5V power for the USB port
The 5V power of the USB is controlled by a GPIO pin of
the external WiFi chip. Setup the GPIO bitmasks in the
platform data of the WiFi chip to ensure that the 5V
power gets enabled by the ath9k driver.
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40478
Gabor Juhos [Sat, 12 Apr 2014 17:53:34 +0000 (17:53 +0000)]
ar71xx: wndr4300: use KEY_RFKILL code for the Wireless button
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40477
Gabor Juhos [Sat, 12 Apr 2014 17:42:36 +0000 (17:42 +0000)]
ar71xx: add default LED config for WiFi LEDs on the WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40476
Gabor Juhos [Sat, 12 Apr 2014 17:42:35 +0000 (17:42 +0000)]
ar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40475
Gabor Juhos [Sat, 12 Apr 2014 17:42:34 +0000 (17:42 +0000)]
ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40474
Gabor Juhos [Sat, 12 Apr 2014 17:42:33 +0000 (17:42 +0000)]
ar71xx: wndr4300: change 'orange' to 'amber' in LED color names
The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.
Based on the the WNDR3700v4 support patch from Ralph Perlich:
http://patchwork.openwrt.org/patch/4763/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40473
Gabor Juhos [Sat, 12 Apr 2014 16:01:45 +0000 (16:01 +0000)]
ar71xx: fix typos in TP-Link rssileds definition
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40472
Gabor Juhos [Sat, 12 Apr 2014 16:01:43 +0000 (16:01 +0000)]
ar71xx: add rssileds for Ubiquiti XM boards
Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40471
Felix Fietkau [Sat, 12 Apr 2014 15:43:17 +0000 (15:43 +0000)]
kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40470
Felix Fietkau [Sat, 12 Apr 2014 14:28:34 +0000 (14:28 +0000)]
hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.
When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number
Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3
Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282
My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.
Signed-off-by hnyman <hannu.nyman@iki.fi>
SVN-Revision: 40469
Gabor Juhos [Sat, 12 Apr 2014 12:05:18 +0000 (12:05 +0000)]
x86/net5501: remove broken flag
According to Christophe, the kernel boots on the Soekris net5501
board.
Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40468
Gabor Juhos [Sat, 12 Apr 2014 11:59:07 +0000 (11:59 +0000)]
kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467
projects / lede.git / log