ext4: Use bitops to read/modify i_flags in struct ext4_inode_info

commit 12e9b892002d9af057655d35b44db8ee9243b0dc upstream (as of v2.6.34-git13)

At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.

https://bugzilla.kernel.org/show_bug.cgi?id=15792

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Show journal_checksum option

commit 39a4bade8c1826b658316d66ee81c09b0a4d7d42 upstream (as of v2.6.34-git13)

We failed to show journal_checksum option in /proc/mounts. Fix it.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: check for a good block group before loading buddy pages

commit 8a57d9d61a6e361c7bb159dda797672c1df1a691 upstream (as of v2.6.34-git13)

This adds a new field in ext4_group_info to cache the largest available
block range in a block group; and don't load the buddy pages until *after*
we've done a sanity check on the block group.

With large allocation requests (e.g., fallocate(), 8MiB) and relatively full
partitions, it's easy to have no block groups with a block extent large
enough to satisfy the input request length.  This currently causes the loop
during cr == 0 in ext4_mb_regular_allocator() to load the buddy bitmap pages
for EVERY block group.  That can be a lot of pages.  The patch below allows
us to call ext4_mb_good_group() BEFORE we load the buddy pages (although we
have check again after we lock the block group).

Addresses-Google-Bug: #2578108
Addresses-Google-Bug: #2704453

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate

commit 6d19c42b7cf81c39632b6d4dbc514e8449bcd346 upstream (as of v2.6.34-git13)

Currently using posix_fallocate one can bypass an RLIMIT_FSIZE limit
and create a file larger than the limit. Add a check for that.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Amit Arora <aarora@in.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Remove extraneous newlines in ext4_msg() calls

commit fbe845ddf368f77f86aa7500f8fd2690f54c66a8 upstream (as of v2.6.34-git13)

Addresses-Google-Bug: #2562325

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: init statistics after journal recovery

commit 84061e07c5fbbbf9dc8aef8fb750fc3a2dfc31f3 upstream (as of v2.6.34-git13)

Currently block/inode/dir counters initialized before journal was
recovered. In fact after journal recovery this info will probably
change. And freeblocks it critical for correct delalloc mode
accounting.

https://bugzilla.kernel.org/show_bug.cgi?id=15768

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: clean up inode bitmaps manipulation in ext4_free_inode

commit d17413c08cd2b1dd2bf2cfdbb0f7b736b2b2b15c upstrea (as of v2..34-git13)

- Reorganize locking scheme to batch two atomic operation in to one.
  This also allow us to state what healthy group must obey following rule
  ext4_free_inodes_count(sb, gdp) == ext4_count_free(inode_bitmap, NUM);
- Fix possible undefined pointer dereference.
- Even if group descriptor stats aren't accessible we have to update
  inode bitmaps.
- Move non-group members update out of group_lock.

Note: this commit has been observed to fix fs corruption problems
under heavy fs load

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Do not zero out uninitialized extents beyond i_size

commit 21ca087a3891efab4d45488db8febee474d26c68 upstream (as of v2.6.34-git13)

The extents code will sometimes zero out blocks and mark them as
initialized instead of splitting an extent into several smaller ones.
This optimization however, causes problems if the extent is beyond
i_size because fsck will complain if there are uninitialized blocks
after i_size as this can not be distinguished from an inode that has
an incorrect i_size field.

https://bugzilla.kernel.org/show_bug.cgi?id=15742

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: don't scan/accumulate more pages than mballoc will allocate

commit c445e3e0a5c2804524dec6e55f66d63f6bc5bc3e upstream (as of v2.6.34-git13)

There was a bug reported on RHEL5 that a 10G dd on a 12G box
had a very, very slow sync after that.

At issue was the loop in write_cache_pages scanning all the way
to the end of the 10G file, even though the subsequent call
to mpage_da_submit_io would only actually write a smallish amt; then
we went back to the write_cache_pages loop ... wasting tons of time
in calling __mpage_da_writepage for thousands of pages we would
just revisit (many times) later.

Upstream it's not such a big issue for sys_sync because we get
to the loop with a much smaller nr_to_write, which limits the loop.

However, talking with Aneesh he realized that fsync upstream still
gets here with a very large nr_to_write and we face the same problem.

This patch makes mpage_add_bh_to_extent stop the loop after we've
accumulated 2048 pages, by setting mpd->io_done = 1; which ultimately
causes the write_cache_pages loop to break.

Repeating the test with a dirty_ratio of 80 (to leave something for
fsync to do), I don't see huge IO performance gains, but the reduction
in cpu usage is striking: 80% usage with stock, and 2% with the
below patch.  Instrumenting the loop in write_cache_pages clearly
shows that we are wasting time here.

Eventually we need to change mpage_da_map_pages() also submit its I/O
to the block layer, subsuming mpage_da_submit_io(), and then change it
call ext4_get_blocks() multiple times.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: stop issuing discards if not supported by device

commit a30eec2a8650a77f754e84b2e15f062fe652baa7 upstream (as of v2.6.34-git13)

Turn off issuance of discard requests if the device does
not support it - similar to the action we take for barriers.
This will save a little computation time if a non-discardable
device is mounted with -o discard, and also makes it obvious
that it's not doing what was asked at mount time ...

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: don't return to userspace after freezing the fs with a mutex held

commit 6b0310fbf087ad6e9e3b8392adca97cd77184084 upstream (as of v2.6.34-git13)

ext4_freeze() used jbd2_journal_lock_updates() which takes
the j_barrier mutex, and then returns to userspace.  The
kernel does not like this:

================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
lvcreate/1075 is leaving the kernel with locks still held!
1 lock held by lvcreate/1075:
 #0:  (&journal->j_barrier){+.+...}, at: [<ffffffff811c6214>]
jbd2_journal_lock_updates+0xe1/0xf0

Use vfs_check_frozen() added to ext4_journal_start_sb() and
ext4_force_commit() instead.

Addresses-Red-Hat-Bugzilla: #568503

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: check s_log_groups_per_flex in online resize code

commit 42007efd569f1cf3bfb9a61da60ef6c2179508ca upstream (as of v2.6.34-git13)

If groups_per_flex < 2, sbi->s_flex_groups[] doesn't get filled out,
and every other access to this first tests s_log_groups_per_flex;
same thing needs to happen in resize or we'll wander off into
a null pointer when doing an online resize of the file system.

Thanks to Christoph Biedl, who came up with the trivial testcase:

# truncate --size 128M fsfile
# mkfs.ext3 -F fsfile
# tune2fs -O extents,uninit_bg,dir_index,flex_bg,huge_file,dir_nlink,extra_isize fsfile
# e2fsck -yDf -C0 fsfile
# truncate --size 132M fsfile
# losetup /dev/loop0 fsfile
# mount /dev/loop0 mnt
# resize2fs -p /dev/loop0

https://bugzilla.kernel.org/show_bug.cgi?id=13549

Reported-by: Alessandro Polverini <alex@nibbles.it>
Test-case-by: Christoph Biedl <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: fix quota accounting in case of fallocate

commit 35121c9860316d7799cea0fbc359a9186e7c2747 upstream (as of v2.6.34-git13)

allocated_meta_data is already included in 'used' variable.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: allow defrag (EXT4_IOC_MOVE_EXT) in 32bit compat mode

commit b684b2ee9409f2890a8b3aea98525bbe5f84e276 upstream (as of v2.6.34-git13)

I have an x86_64 kernel with i386 userspace. e4defrag fails on the
EXT4_IOC_MOVE_EXT ioctl because it is not wired up for the compat
case. It seems that struct move_extent is compat save, only types
with fixed widths are used:
{
        __u32 reserved;         /* should be zero */
        __u32 donor_fd;         /* donor file descriptor */
        __u64 orig_start;       /* logical start offset in block for orig */
        __u64 donor_start;      /* logical start offset in block for donor */
        __u64 len;              /* block length to be moved */
        __u64 moved_len;        /* moved block length */
};

Lets just wire up EXT4_IOC_MOVE_EXT for the compat case.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
CC: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: rename ext4_mb_release_desc() to ext4_mb_unload_buddy()

commit e39e07fdfd98be8650385f12a7b81d6adc547510 upstream (as of v2.6.34-git13)

This function cleans up after ext4_mb_load_buddy(), so the renaming
makes the code clearer.

Signed-off-by: Jing Zhang <zj.barak@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Remove unnecessary call to ext4_get_group_desc() in mballoc

commit 62e823a2cba18509ee826d775270e8ef9071b5bc upstream (as of v2.6.34-git13)

Signed-off-by: Jing Zhang <zj.barak@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: fix memory leaks in error path handling of ext4_ext_zeroout()

commit b720303df7352d4a7a1f61e467e0a124913c0d41 upstream (as of v2.6.34-git13)

When EIO occurs after bio is submitted, there is no memory free
operation for bio, which results in memory leakage. And there is also
no check against bio_alloc() for bio.

Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jing Zhang <zj.barak@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: check missed return value in ext4_sync_file()

commit 0671e704658b9f26f85e78d51176daa861f955c7 upstream (as of v2.6.34-git13)

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Issue the discard operation *before* releasing the blocks to be reused

commit b90f687018e6d6c77d981b09203780f7001407e5 upstream (as of v2.6.34-rc6)

Otherwise, we can end up having data corruption because the blocks
could get reused and then discarded!

https://bugzilla.kernel.org/show_bug.cgi?id=15579

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix buffer head leaks after calls to ext4_get_inode_loc()

commit fd2dd9fbaf9e498ec63eef298921e36556f7214c upstream (as of v2.6.34-rc6)

Calls to ext4_get_inode_loc() returns with a reference to a buffer
head in iloc->bh.  The callers of this function in ext4_write_inode()
when in no journal mode and in ext4_xattr_fiemap() don't release the
buffer head after using it.

Addresses-Google-Bug: #2548165

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix possible lost inode write in no journal mode

commit 8b472d739b2ddd8ab7fb278874f696cd95b25a5e upstream (as of v2.6.34-rc6)

In the no-journal case, ext4_write_inode() will fetch the bh and call
sync_dirty_buffer() on it.  However, if the bh has already been
written and the bh reclaimed for some other purpose, AND if the inode
is the only one in the inode table block in use, then
ext4_get_inode_loc() will not read the inode table block from disk,
but as an optimization, fill the block with zero's assuming that its
caller will copy in the on-disk version of the inode.  This is not
done by ext4_write_inode(), so the contents of the inode can simply
get lost.  The fix is to use __ext4_get_inode_loc() with in_mem set to
0, instead of ext4_get_inode_loc().  Long term the API needs to be
fixed so it's obvious why latter is not safe.

Addresses-Google-Bug: #2526446

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fixed inode allocator to correctly track a flex_bg's used_dirs

commit c4caae25187ff3f5e837c6f04eb1acc2723c72d3 upstream (as of v2.6.34-rc3)

When used_dirs was introduced for the flex_groups struct, it looks
like the accounting was not put into place properly, in some places
manipulating free_inodes rather than used_dirs.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix estimate of # of blocks needed to write indirect-mapped files

commit d330a5befb88875a9b3d2db62f9b74dadf660b13 upstream (as of v2.6.34-rc3)

http://bugzilla.kernel.org/show_bug.cgi?id=15420

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Code cleanup for EXT4_IOC_MOVE_EXT ioctl

commit c437b2733520599a2c6e0dbcdeae611319f84707 upstream (as of v2.6.33-git11)

a) Fix sparse warning in ext4_ioctl()
b) Remove unneeded variable in mext_leaf_block()
c) Fix spelling typo in mext_check_arguments()

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix the NULL reference in double_down_write_data_sem()

commit 7247c0caa23d94a1cb6b307edba9dc45fb0798d4 upstream (as of v2.6.33-git11)

If EXT4_IOC_MOVE_EXT ioctl is called with NULL donor_fd, fget() in
ext4_ioctl() gets inappropriate file structure for donor; so we need
to do this check earlier, before calling double_down_write_data_sem().

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix insertion point of extent in mext_insert_across_blocks()

commit 5fd5249aa36fad98c9fd5edced352939e54f9324 upstream (as of v2.6.33-git11)

If the leaf node has 2 extent space or fewer and EXT4_IOC_MOVE_EXT
ioctl is called with the file offset where after the 2nd extent
covers, mext_insert_across_blocks() always tries to insert extent into
the first extent.  As a result, the file gets corrupted because of
wrong extent order.  The patch fixes this problem.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: make "offset" consistent in ext4_check_dir_entry()

commit b8b8afe236e97b6359d46d3a3f8c46455e192271 upstream (as of v2.6.33-git11)

The callers of ext4_check_dir_entry() usually pass in the "file
offset" (ext4_readdir, htree_dirblock_to_tree, search_dirblock,
ext4_dx_find_entry, empty_dir), but a few callers (add_dirent_to_buf,
ext4_delete_entry) only pass in the buffer offset.

To accomodate those last two (which would be hard to fix otherwise),
this patch changes ext4_check_dir_entry() to print the physical block
number and the relative offset as well as the passed-in offset.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Handle non empty on-disk orphan link

commit 6e3617e579e070d3655a93ee9ed7149113e795e0 upstream (as of v2.6.33-git11)

In case of truncate errors we explicitly remove inode from in-core
orphan list via orphan_del(NULL, inode) without modifying the on-disk list.

But later on, the same inode may be inserted in the orphan list again
which will result the on-disk linked list getting corrupted.  If inode
i_dtime contains valid value, then skip on-disk list modification.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: explicitly remove inode from orphan list after failed direct io

commit da1dafca84413145f5ac59998b4cdd06fb89f721 upstream (as of v2.6.33-git11)

Otherwise non-empty orphan list will be triggered on umount.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: fix error handling in migrate

commit f39490bcd1691d65dc33689222a12e1fc13dd824 upstream (as of v2.6.33-git11)

Set i_nlink to zero for temporary inode from very beginning.
otherwise we may fail to start new journal handle and this
inode will be unreferenced but with i_nlink == 1
Since we hold inode reference it can not be pruned.

Also add missed journal_start retval check.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix fencepost error in chosing choosing group vs file preallocation.

commit cc483f102c3f703e853c96f95a654f0106fb2603 upstream (as of v2.6.33-git11)

The ext4 multiblock allocator decides whether to use group or file
preallocation based on the file size.  When the file size reaches
s_mb_stream_request (default is 16 blocks), it changes to use a
file-specific preallocation. This is cool, but it has a tiny problem.

See a simple script:
mkfs.ext4 -b 1024 /dev/sda8 1000000
mount -t ext4 -o nodelalloc /dev/sda8 /mnt/ext4
for((i=0;i<5;i++))
do
cat /mnt/4096>>/mnt/ext4/a #4096 is a file with 4096 characters.
cat /mnt/4096>>/mnt/ext4/b
done
debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1

And you get
BLOCKS:
(0-14):8705-8719, (15):2356, (16-19):8465-8468

So there are 3 extents, a bit strange for the lonely 15th logical
block.  As we write to the 16 blocks, we choose file preallocation in
ext4_mb_group_or_file, but in ext4_mb_normalize_request, we meet with
the 16*1024 range, so no preallocation will be carried. file b then
reserves the space after '2356', so when when write 16, we start from
another part.

This patch just change the check in ext4_mb_group_or_file, so
that for the lonely 15 we will still use group preallocation.
After the patch, we will get:
debuge4fs -R 'stat a' /dev/sda8|grep BLOCKS -A 1
BLOCKS:
(0-15):8705-8720, (16-19):8465-8468

Looks more sane. Thanks.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Add flag to files with blocks intentionally past EOF

commit c8d46e41bc744c8fa0092112af3942fcd46c8b18 upstream (as of v2.6.33-git11)

fallocate() may potentially instantiate blocks past EOF, depending
on the flags used when it is called.

e2fsck currently has a test for blocks past i_size, and it
sometimes trips up - noticeably on xfstests 013 which runs fsstress.

This patch from Jiayang does fix it up - it (along with
e2fsprogs updates and other patches recently from Aneesh) has
survived many fsstress runs in a row.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix BUG_ON at fs/buffer.c:652 in no journal mode

commit 73b50c1c92666d326b5fa2c945d46509f2f6d91f upstream (as of v2.6.33-git11)

Calls to ext4_handle_dirty_metadata should only pass in an inode
pointer for inode-specific metadata, and not for shared metadata
blocks such as inode table blocks, block group descriptors, the
superblock, etc.

The BUG_ON can get tripped when updating a special device (such as a
block device) that is opened (so that i_mapping is set in
fs/block_dev.c) and the file system is mounted in no journal mode.

Addresses-Google-Bug: #2404870

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Use bitops to read/modify EXT4_I(inode)->i_state

commit 19f5fb7ad679bb361222c7916086435020c37cce upstream (as of v2.6.33-git11)

At several places we modify EXT4_I(inode)->i_state without holding
i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage,
ext4_do_update_inode, ...). These modifications are racy and we can
lose updates to i_state. So convert handling of i_state to use bitops
which are atomic.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Drop EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE flag

commit 1296cc85c26e94eb865d03f82140f27d598de467 upstream (as of v2.6.33-rc6)

We should update reserve space if it is delalloc buffer
and that is indicated by EXT4_GET_BLOCKS_DELALLOC_RESERVE flag.
So use EXT4_GET_BLOCKS_DELALLOC_RESERVE in place of
EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE

[ Stable note: This fixes a corruption cuased by the following
  reproduction case:

  rm -f $TEST_FN
  touch $TEST_FN
  fallocate -n -o 656712 -l 858907 $TEST_FN
  dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1011020 count=36983
  sync
  dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=332121 count=24005
  dd if=/dev/zero of=$TEST_FN conv=notrunc bs=1 seek=1040179 count=93319

  If the filesystem is then unmounted and e2fsck run forced, the
  i_blocks field for the file $TEST_FN will be found to be incorrect. ]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix quota accounting error with fallocate

commit 5f634d064c709ea02c3cdaa850a08323a4a4bf28 upstream (as of v2.6.33-rc6)

When we fallocate a region of the file which we had recently written,
and which is still in the page cache marked as delayed allocated blocks
we need to make sure we don't do the quota update on writepage path.
This is because the needed quota updated would have already be done
by fallocate.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Handle -EDQUOT error on write

commit 1db913823c0f8360fccbd24ca67eb073966a5ffd upstream (as of v2.6.33-rc6)

We need to release the journal before we do a write_inode.  Otherwise
we could deadlock.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Calculate metadata requirements more accurately

commit 9d0be50230b333005635967f7ecd4897dbfd181b upstream (as of v2.6.33-rc3)

In the past, ext4_calc_metadata_amount(), and its sub-functions
ext4_ext_calc_metadata_amount() and ext4_indirect_calc_metadata_amount()
badly over-estimated the number of metadata blocks that might be
required for delayed allocation blocks.  This didn't matter as much
when functions which managed the reserved metadata blocks were more
aggressive about dropping reserved metadata blocks as delayed
allocation blocks were written, but unfortunately they were too
aggressive.  This was fixed in commit 0637c6f, but as a result the
over-estimation by ext4_calc_metadata_amount() would lead to reserving
2-3 times the number of pending delayed allocation blocks as
potentially required metadata blocks.  So if there are 1 megabytes of
blocks which have been not yet been allocation, up to 3 megabytes of
space would get reserved out of the user's quota and from the file
system free space pool until all of the inode's data blocks have been
allocated.

This commit addresses this problem by much more accurately estimating
the number of metadata blocks that will be required.  It will still
somewhat over-estimate the number of blocks needed, since it must make
a worst case estimate not knowing which physical blocks will be
needed, but it is much more accurate than before.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix accounting of reserved metadata blocks

commit ee5f4d9cdf32fd99172d11665c592a288c2b1ff4 upstream (as of v2.6.33-rc3)

Commit 0637c6f had a typo which caused the reserved metadata blocks to
not be released correctly.   Fix this.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Patch up how we claim metadata blocks for quota purposes

commit 0637c6f4135f592f094207c7c21e7c0fc5557834 upstream (as of v2.6.33-rc3)

As reported in Kernel Bugzilla #14936, commit d21cd8f triggered a BUG
in the function ext4_da_update_reserve_space() found in
fs/ext4/inode.c.  The root cause of this BUG() was caused by the fact
that ext4_calc_metadata_amount() can severely over-estimate how many
metadata blocks will be needed, especially when using direct
block-mapped files.

In addition, it can also badly *under* estimate how much space is
needed, since ext4_calc_metadata_amount() assumes that the blocks are
contiguous, and this is not always true.  If the application is
writing blocks to a sparse file, the number of metadata blocks
necessary can be severly underestimated by the functions
ext4_da_reserve_space(), ext4_da_update_reserve_space() and
ext4_da_release_space().  This was the cause of the dq_claim_space
reports found on kerneloops.org.

Unfortunately, doing this right means that we need to massively
over-estimate the amount of free space needed.  So in some cases we
may need to force the inode to be written to disk asynchronously in
to avoid spurious quota failures.

http://bugzilla.kernel.org/show_bug.cgi?id=14936

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Ensure zeroout blocks have no dirty metadata

commit 515f41c33a9d44a964264c9511ad2c869af1fac3 upstream (as of v2.6.33-rc3)

This fixes a bug (found by Curt Wohlgemuth) in which new blocks
returned from an extent created with ext4_ext_zeroout() can have dirty
metadata still associated with them.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: return correct wbc.nr_to_write in ext4_da_writepages

commit 2faf2e19dd0e060eeb32442858ef495ac3083277 upstream (as of v2.6.33-rc3)

When ext4_da_writepages increases the nr_to_write in writeback_control
then it must always re-base the return value.  Originally there was a
(misguided) attempt prevent wbc.nr_to_write from going negative.  In
fact, it's necessary to allow nr_to_write to be negative so that
wb_writeback() can correctly calculate how many pages were actually
written.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Eliminate potential double free on error path

commit d3533d72e7478a61a3e1936956fc825289a2acf4 upstream (as of v2.6.33-rc3)

b_entry_name and buffer are initially NULL, are initialized within a loop
to the result of calling kmalloc, and are freed at the bottom of this loop.
The loop contains gotos to cleanup, which also frees b_entry_name and
buffer.  Some of these gotos are before the reinitializations of
b_entry_name and buffer.  To maintain the invariant that b_entry_name and
buffer are NULL at the top of the loop, and thus acceptable arguments to
kfree, these variables are now set to NULL after the kfrees.

This seems to be the simplest solution.  A more complicated solution
would be to introduce more labels in the error handling code at the end of
the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier E;
expression E1;
iterator I;
statement S;
@@

*kfree(E);
... when != E = E1
    when != I(E,...) S
    when != &E
*kfree(E);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4, jbd2: Add barriers for file systems with exernal journals

commit cc3e1bea5d87635c519da657303690f5538bb4eb upstream (as of v2.6.33-rc3)

This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk.  We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.

We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk.  Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.

Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: replace BUG() with return -EIO in ext4_ext_get_blocks

commit 034fb4c95fc0fed4ec4a50778127b92c6f2aec01 upstream (as of v2.6.33-rc3)

This patch fixes the Kernel BZ #14286.  When the address of an extent
corresponding to a valid block is corrupted, a -EIO should be reported
instead of a BUG().  This situation should not normally not occur
except in the case of a corrupted filesystem.  If however it does,
then the system should not panic directly but depending on the mount
time options appropriate action should be taken. If the mount options
so permit, the I/O should be gracefully aborted by returning a -EIO.

http://bugzilla.kernel.org/show_bug.cgi?id=14286

Signed-off-by: Surbhi Palande <surbhi.palande@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: Fix potential quota deadlock

commit d21cd8f163ac44b15c465aab7306db931c606908 upstream (as of v2.6.33-rc2)

We have to delay vfs_dq_claim_space() until allocation context destruction.
Currently we have following call-trace:
ext4_mb_new_blocks()
  /* task is already holding ac->alloc_semp */
 ->ext4_mb_mark_diskspace_used
    ->vfs_dq_claim_space()  /*  acquire dqptr_sem here. Possible deadlock */
 ->ext4_mb_release_context() /* drop ac->alloc_semp here */

Let's move quota claiming to ext4_da_update_reserve_space()

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.32-rc7 #18
 -------------------------------------------------------
 write-truncate-/3465 is trying to acquire lock:
  (&s->s_dquot.dqptr_sem){++++..}, at: [<c025e73b>] dquot_claim_space+0x3b/0x1b0

 but task is already holding lock:
  (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #3 (&meta_group_info[i]->alloc_sem){++++..}:
        [<c017d04b>] __lock_acquire+0xd7b/0x1260
        [<c017d5ea>] lock_acquire+0xba/0xd0
        [<c0527191>] down_read+0x51/0x90
        [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370
        [<c02d0c1c>] ext4_mb_free_blocks+0x46c/0x870
        [<c029c9d3>] ext4_free_blocks+0x73/0x130
        [<c02c8cfc>] ext4_ext_truncate+0x76c/0x8d0
        [<c02a8087>] ext4_truncate+0x187/0x5e0
        [<c01e0f7b>] vmtruncate+0x6b/0x70
        [<c022ec02>] inode_setattr+0x62/0x190
        [<c02a2d7a>] ext4_setattr+0x25a/0x370
        [<c022ee81>] notify_change+0x151/0x340
        [<c021349d>] do_truncate+0x6d/0xa0
        [<c0221034>] may_open+0x1d4/0x200
        [<c022412b>] do_filp_open+0x1eb/0x910
        [<c021244d>] do_sys_open+0x6d/0x140
        [<c021258e>] sys_open+0x2e/0x40
        [<c0103100>] sysenter_do_call+0x12/0x32

 -> #2 (&ei->i_data_sem){++++..}:
        [<c017d04b>] __lock_acquire+0xd7b/0x1260
        [<c017d5ea>] lock_acquire+0xba/0xd0
        [<c0527191>] down_read+0x51/0x90
        [<c02a5787>] ext4_get_blocks+0x47/0x450
        [<c02a74c1>] ext4_getblk+0x61/0x1d0
        [<c02a7a7f>] ext4_bread+0x1f/0xa0
        [<c02bcddc>] ext4_quota_write+0x12c/0x310
        [<c0262d23>] qtree_write_dquot+0x93/0x120
        [<c0261708>] v2_write_dquot+0x28/0x30
        [<c025d3fb>] dquot_commit+0xab/0xf0
        [<c02be977>] ext4_write_dquot+0x77/0x90
        [<c02be9bf>] ext4_mark_dquot_dirty+0x2f/0x50
        [<c025e321>] dquot_alloc_inode+0x101/0x180
        [<c029fec2>] ext4_new_inode+0x602/0xf00
        [<c02ad789>] ext4_create+0x89/0x150
        [<c0221ff2>] vfs_create+0xa2/0xc0
        [<c02246e7>] do_filp_open+0x7a7/0x910
        [<c021244d>] do_sys_open+0x6d/0x140
        [<c021258e>] sys_open+0x2e/0x40
        [<c0103100>] sysenter_do_call+0x12/0x32

 -> #1 (&sb->s_type->i_mutex_key#7/4){+.+...}:
        [<c017d04b>] __lock_acquire+0xd7b/0x1260
        [<c017d5ea>] lock_acquire+0xba/0xd0
        [<c0526505>] mutex_lock_nested+0x65/0x2d0
        [<c0260c9d>] vfs_load_quota_inode+0x4bd/0x5a0
        [<c02610af>] vfs_quota_on_path+0x5f/0x70
        [<c02bc812>] ext4_quota_on+0x112/0x190
        [<c026345a>] sys_quotactl+0x44a/0x8a0
        [<c0103100>] sysenter_do_call+0x12/0x32

 -> #0 (&s->s_dquot.dqptr_sem){++++..}:
        [<c017d361>] __lock_acquire+0x1091/0x1260
        [<c017d5ea>] lock_acquire+0xba/0xd0
        [<c0527191>] down_read+0x51/0x90
        [<c025e73b>] dquot_claim_space+0x3b/0x1b0
        [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380
        [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530
        [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0
        [<c02a5966>] ext4_get_blocks+0x226/0x450
        [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0
        [<c02a6ed6>] ext4_da_writepages+0x506/0x790
        [<c01de272>] do_writepages+0x22/0x50
        [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80
        [<c01d7b9b>] filemap_flush+0x2b/0x30
        [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60
        [<c029e595>] ext4_release_file+0x75/0xb0
        [<c0216b59>] __fput+0xf9/0x210
        [<c0216c97>] fput+0x27/0x30
        [<c02122dc>] filp_close+0x4c/0x80
        [<c014510e>] put_files_struct+0x6e/0xd0
        [<c01451b7>] exit_files+0x47/0x60
        [<c0146a24>] do_exit+0x144/0x710
        [<c0147028>] do_group_exit+0x38/0xa0
        [<c0159abc>] get_signal_to_deliver+0x2ac/0x410
        [<c0102849>] do_notify_resume+0xb9/0x890
        [<c01032d2>] work_notifysig+0x13/0x21

 other info that might help us debug this:

 3 locks held by write-truncate-/3465:
  #0:  (jbd2_handle){+.+...}, at: [<c02e1f8f>] start_this_handle+0x38f/0x5c0
  #1:  (&ei->i_data_sem){++++..}, at: [<c02a57f6>] ext4_get_blocks+0xb6/0x450
  #2:  (&meta_group_info[i]->alloc_sem){++++..}, at: [<c02ce962>] ext4_mb_load_buddy+0xb2/0x370

 stack backtrace:
 Pid: 3465, comm: write-truncate- Not tainted 2.6.32-rc7 #18
 Call Trace:
  [<c0524cb3>] ? printk+0x1d/0x22
  [<c017ac9a>] print_circular_bug+0xca/0xd0
  [<c017d361>] __lock_acquire+0x1091/0x1260
  [<c016bca2>] ? sched_clock_local+0xd2/0x170
  [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
  [<c017d5ea>] lock_acquire+0xba/0xd0
  [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0
  [<c0527191>] down_read+0x51/0x90
  [<c025e73b>] ? dquot_claim_space+0x3b/0x1b0
  [<c025e73b>] dquot_claim_space+0x3b/0x1b0
  [<c02cb95f>] ext4_mb_mark_diskspace_used+0x36f/0x380
  [<c02d210a>] ext4_mb_new_blocks+0x34a/0x530
  [<c02c601d>] ? ext4_ext_find_extent+0x25d/0x280
  [<c02c83fb>] ext4_ext_get_blocks+0x122b/0x13c0
  [<c016bca2>] ? sched_clock_local+0xd2/0x170
  [<c016be60>] ? sched_clock_cpu+0x120/0x160
  [<c016beef>] ? cpu_clock+0x4f/0x60
  [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
  [<c052712c>] ? down_write+0x8c/0xa0
  [<c02a5966>] ext4_get_blocks+0x226/0x450
  [<c016be60>] ? sched_clock_cpu+0x120/0x160
  [<c016beef>] ? cpu_clock+0x4f/0x60
  [<c017908b>] ? trace_hardirqs_off+0xb/0x10
  [<c02a5ff3>] mpage_da_map_blocks+0xc3/0xaa0
  [<c01d69cc>] ? find_get_pages_tag+0x16c/0x180
  [<c01d6860>] ? find_get_pages_tag+0x0/0x180
  [<c02a73bd>] ? __mpage_da_writepage+0x16d/0x1a0
  [<c01dfc4e>] ? pagevec_lookup_tag+0x2e/0x40
  [<c01ddf1b>] ? write_cache_pages+0xdb/0x3d0
  [<c02a7250>] ? __mpage_da_writepage+0x0/0x1a0
  [<c02a6ed6>] ext4_da_writepages+0x506/0x790
  [<c016beef>] ? cpu_clock+0x4f/0x60
  [<c016bca2>] ? sched_clock_local+0xd2/0x170
  [<c016be60>] ? sched_clock_cpu+0x120/0x160
  [<c016be60>] ? sched_clock_cpu+0x120/0x160
  [<c02a69d0>] ? ext4_da_writepages+0x0/0x790
  [<c01de272>] do_writepages+0x22/0x50
  [<c01d766d>] __filemap_fdatawrite_range+0x6d/0x80
  [<c01d7b9b>] filemap_flush+0x2b/0x30
  [<c02a40ac>] ext4_alloc_da_blocks+0x5c/0x60
  [<c029e595>] ext4_release_file+0x75/0xb0
  [<c0216b59>] __fput+0xf9/0x210
  [<c0216c97>] fput+0x27/0x30
  [<c02122dc>] filp_close+0x4c/0x80
  [<c014510e>] put_files_struct+0x6e/0xd0
  [<c01451b7>] exit_files+0x47/0x60
  [<c0146a24>] do_exit+0x144/0x710
  [<c017b163>] ? lock_release_holdtime+0x33/0x210
  [<c0528137>] ? _spin_unlock_irq+0x27/0x30
  [<c0147028>] do_group_exit+0x38/0xa0
  [<c017babb>] ? trace_hardirqs_on+0xb/0x10
  [<c0159abc>] get_signal_to_deliver+0x2ac/0x410
  [<c0102849>] do_notify_resume+0xb9/0x890
  [<c0178fd0>] ? trace_hardirqs_off_caller+0x20/0xd0
  [<c017b163>] ? lock_release_holdtime+0x33/0x210
  [<c0165b50>] ? autoremove_wake_function+0x0/0x50
  [<c017ba54>] ? trace_hardirqs_on_caller+0x134/0x190
  [<c017babb>] ? trace_hardirqs_on+0xb/0x10
  [<c0300ba4>] ? security_file_permission+0x14/0x20
  [<c0215761>] ? vfs_write+0x131/0x190
  [<c0214f50>] ? do_sync_write+0x0/0x120
  [<c0103115>] ? sysenter_do_call+0x27/0x32
  [<c01032d2>] work_notifysig+0x13/0x21

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ethtool: Fix potential user buffer overflow for ETHTOOL_{G, S}RXFH

commit bf988435bd5b53529f4408a8efb1f433f6ddfda9 upstream.

struct ethtool_rxnfc was originally defined in 2.6.27 for the
ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data
fields.  It was then extended in 2.6.30 to support various additional
commands.  These commands should have been defined to use a new
structure, but it is too late to change that now.

Since user-space may still be using the old structure definition
for the ETHTOOL_{G,S}RXFH commands, and since they do not need the
additional fields, only copy the originally defined fields to and
from user-space.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: FTDI: Add support for the RT System VX-7 radio programming cable

commit fcc6cb789c77ffee31710eec64efeb25f2124f7a upstream.

RT Systems has put out bunch of ham radio cables based on the FT232RL
chip.  Each cable type has a unique PID, this adds one for the Yaesu VX-7
radios.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: add quirk for Broadcom BT dongle

commit 63ab71deae67b031045bb28bf8cff45180089f8f upstream.

This device needs to be reset when resuming

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: sisusbvga: Fix for USB 3.0

commit 20a12f007feee1cfa761b431047271d1141d8031 upstream.

Super speed is also fast enough to let sisusbvga operate.
Therefor expand the checks.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: adds Artisman USB dongle to list of quirky devices

commit 47f19c0eedb377ad1ee8114f464d001ec5f96a69 upstream.

When an attempt is made to read the interface strings of the Artisman
Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written
to the dmesg log (uhci_result_common: failed with status 440000) and the
dongle resets itself, resulting in a disconnect/reconnect loop.

Adding the dongle to the list of devices in quirks.c, with the same
quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D
joystick, stops the device from resetting and allows it to be used with
no problems.

Signed-off-by: Paul Mortier <mortier@btinternet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: option: Add support for AMOI Skypephone S2

commit 7595931c986f50b1e197ce7b881563e36a7d041e upstream.

usbserial: Add AMOI Skypephone S2 support.

This patch adds support for the AMOI Skypephone S2 to the usbserial module.

Tested-by: Dennis Jansen <Dennis.Jansen@web.de>
Signed-off-by: Dennis Jansen <Dennis.Jansen@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: ftdi_sio: support for Signalyzer tools based on FTDI chips

commit 77dbd74e16b566e9d5eeb4be18ae3ee7d5902bd3 upstream.

ftdi_sio: support for Signalyzer tools based on FTDI chips

This patch adds support for the Xverve Signalyzers.

Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c

commit 9d72c81d657340e54a260a3b621f4a9f5b33829c upstream.

Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c
Allows use of 3G radio only

Signed-off-by: August Huber <gus@pbx.org>
Cc: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: option: add support for 1da5:4518

commit 646d90e2b925578abef5c45853e0b166b6a450bf upstream.

Signed-off-by: Omer Sezgin Ugurlu <omer.ugurlu@a-kent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: g_serial: fix tty cleanup on unload

commit b23097b793081358a6d943263c91bae4c955c4e3 upstream.

Call put_tty_driver() in cleanup function, to fix Oops when trying to open
gadget serial char device after module unload.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: g_serial: don't set low_latency flag

commit 44a0c0190b500ee6bcfc0976fe540f65dee2cd67 upstream.

No longer set low_latency flag as it causes this warning backtrace:

  WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x6c/0x288()

Fix associated locking and wakeups.

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: Maulik Mankad <x0082077@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: obey the sysfs power/wakeup setting

commit 48826626263d4a61d06fd8c5805da31f925aefa0 upstream.

This patch (as1403) is a partial reversion of an earlier change
(commit 5f677f1d45b2bf08085bbba7394392dfa586fa8e "USB: fix remote
wakeup settings during system sleep").  After hearing from a user, I
realized that remote wakeup should be enabled during system sleep
whenever userspace allows it, and not only if a driver requests it
too.

Indeed, there could be a device with no driver, that does nothing but
generate a wakeup request when the user presses a button.  Such a
device should be allowed to do its job.

The problem fixed by the earlier patch -- device generating a wakeup
request for no reason, causing system suspend to abort -- was also
addressed by a later patch ("USB: don't enable remote wakeup by
default", accepted but not yet merged into mainline).  The device
won't be able to generate the bogus wakeup requests because it will be
disabled for remote wakeup by default.  Hence this reversion will not
re-introduce any old problems.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: add USB ID for 0bda:8171

commit c0087580b8d414f6874cfe93d2653212842fcb44 upstream.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192su: add USB VID/PID for HWNUm-300

commit 488d3749620779ab2668c0dba2962836e51e3cd6 upstream.

The Hercules Wireless N USB mini (HWNUm-300) uses the RTL8191S chipset
and seems to work with this driver.

Signed-off-by: Stephane Glondu <steph@glondu.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Do not try to disable hpet if it hasn't been initialized before

commit ff4878089e1eaeac79d57878ad4ea32910fb4037 upstream.

hpet_disable is called unconditionally on machine reboot if hpet support
is compiled in the kernel.
hpet_disable only checks if the machine is hpet capable but doesn't make
sure that hpet has been initialized.

[ tglx: Made it a one liner and removed the redundant hpet_address check ]

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.DEB.2.00.1007211726240.22235@kaball-desktop>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: 6226/1: fix kprobe bug in ldr instruction emulation

commit 0ebe25f90cd99bb1bcf622ec8a841421d48380d6 upstream.

From: Bin Yang <bin.yang@marvell.com>

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220

commit 2503a5ecd86c002506001eba432c524ea009fe7f upstream.

RealView boards with certain revisions of the L220 cache controller (ARM11*
processors only) may have issues (hardware deadlock) with the recent changes to
the mb() barrier implementation (DSB followed by an L2 cache sync). The patch
redefines the RealView ARM11MPCore mandatory barriers without the outer_sync()
call.

Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: twl40300-keypad - fix handling of "all ground" rows

commit 3fea60261e73dbf4a51130d40cafcc8465b0f2c3 upstream.

The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c)
defines a key map for the matrix keypad keyboard. The hardware seems to
use all of the 8 rows and 8 columns of the keypad, although not all
possible locations are used.

The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys
are defined with a row and column number between 0 and 7, except

        KEY(0xff, 2, KEY_F9),
        KEY(0xff, 4, KEY_F10),
        KEY(0xff, 5, KEY_F11),

which represent keycodes that should be emitted when entire row is
connected to the ground.  since the driver handles this case as if we
had an extra column in the key matrix. Unfortunately we do not allocate
enough space and end up owerwriting some random memory.

Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table

commit 3e1bbc8d5018a05c0793c8a32b777a1396eb4414 upstream.

Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up
i8042 and breaking the touchpad.  Add this model to i8042_dmi_noloop_table[]
to resolve.

BugLink: https://bugs.launchpad.net/bugs/580664
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

IPoIB: Fix world-writable child interface control sysfs attributes

commit 7a52b34b07122ff5f45258d47f260f8a525518f0 upstream.

Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB
child entries are world-writable; however we don't want ordinary users
to be able to create and destroy child interfaces, so fix them to be
writable only by root.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix x2apic preenabled system with kexec

commit fd19dce7ac07973f700b0f13fb7f94b951414a4c upstream.

Found one x2apic system kexec loop test failed
when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip)

first kernel can kexec second kernel, but second kernel can not kexec third one.

it can be duplicated on another system with BIOS preenabled x2apic.
First kernel can not kexec second kernel.

It turns out, when kernel boot with pre-enabled x2apic, it will not execute
disable_local_APIC on shutdown path.

when init_apic_mappings() is called in setup_arch, it will skip setting of
apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic())
Then later, disable_local_APIC() will bail out early because !apic_phys.

So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys.

another solution could be updating init_apic_mappings() to set apic_phys even
for preenabled x2apic system. Actually even for x2apic system, that lapic
address is mapped already in early stage.

BTW: is there any x2apic preenabled system with apicid of boot cpu > 255?

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C3EB22B.3000701@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ASoC: Remove duplicate AUX definition from WM8776

commit 3c0709396df0869786f83e4b2d2d687c70ee886d upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sdhci-s3c: add missing remove function

commit 9d51a6b2487724e8713cd2794cf09ffeee5f6932 upstream.

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALL

commit db048b69037e7fa6a7d9e95a1271a50dc08ae233 upstream.

On a 32-bit machine, info.rule_cnt >= 0x40000000 leads to integer
overflow and the buffer may be smaller than needed.  Since
ETHTOOL_GRXCLSRLALL is unprivileged, this can presumably be used for at
least denial of service.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtc: fix ds1388 time corruption

commit 96fc3a45ea073136566f3c2676cad52f8b39a7df upstream.

The ds1307 driver misreads the ds1388 registers when checking for 12 or 24
hour mode.  Instead of checking the hour register it reads the minute
register.  Therefore the driver thinks minutes >= 40 has the 12HR bit set
and resets the minute register by zeroing the high bits.  This results in
minutes are reset to 0-9, jumping back in time 40 or 50 minutes.  The time
jump is also written back to the RTC.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tcp: fix crash in tcp_xmit_retransmit_queue

commit 45e77d314585869dfe43c82679f7e08c9b35b898 upstream.

It can happen that there are no packets in queue while calling
tcp_xmit_retransmit_queue(). tcp_write_queue_head() then returns
NULL and that gets deref'ed to get sacked into a local var.

There is no work to do if no packets are outstanding so we just
exit early.

This oops was introduced by 08ebd1721ab8fd (tcp: remove tp->lost_out
guard to make joining diff nicer).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Tested-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net/core: neighbour update Oops

commit 91a72a70594e5212c97705ca6a694bd307f7a26b upstream.

When configuring DMVPN (GRE + openNHRP) and a GRE remote
address is configured a kernel Oops is observed.  The
obserseved Oops is caused by a NULL header_ops pointer
(neigh->dev->header_ops) in neigh_update_hhs() when

void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
= neigh->dev->header_ops->cache_update;

is executed.  The dev associated with the NULL header_ops is
the GRE interface.  This patch guards against the
possibility that header_ops is NULL.

This Oops was first observed in kernel version 2.6.26.8.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ide: Fix IDE taskfile with cfq scheduler

commit 720fc22a7af79d91ec460c80efa92c65c12d105e upstream.

When ide taskfile access is being used (for example with hdparm --security
commands) and cfq scheduler is selected, the scheduler crashes on BUG in
cfq_put_request.

The reason is that the cfq scheduler is tracking counts of read and write
requests separately; the ide-taskfile subsystem allocates a read request and
then flips the flag to make it a write request. The counters in cfq will
mismatch.

This patch changes ide-taskfile to allocate the READ or WRITE request as
required and don't change the flag later.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cmd640: fix kernel oops in test_irq() method

commit a9ddabc52ce3757a4331d6c1e8bf4065333cc51b upstream.

When implementing the test_iqr() method, I forgot that this driver is not an
ordinary PCI driver and also needs to support VLB variant of the chip. Moreover,
'hwif->dev' should be NULL, potentially causing oops in pci_read_config_byte().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

commit 8cd774ad30c22b9d89823f1f05d845f4cdaba9e8 upstream.

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

genirq: Deal with desc->set_type() changing desc->chip

commit 4673247562e39a17e09440fa1400819522ccd446 upstream.

The set_type() function can change the chip implementation when the
trigger mode changes. That might result in using an non-initialized
irq chip when called from __setup_irq() or when called via
set_irq_type() on an already enabled irq.

The set_irq_type() function should not be called on an enabled irq,
but because we forgot to put a check into it, we have a bunch of users
which grew the habit of doing that and it never blew up as the
function is serialized via desc->lock against all users of desc->chip
and they never hit the non-initialized irq chip issue.

The easy fix for the __setup_irq() issue would be to move the
irq_chip_set_defaults(desc->chip) call after the trigger setting to
make sure that a chip change is covered.

But as we have already users, which do the type setting after
request_irq(), the safe fix for now is to call irq_chip_set_defaults()
from __irq_set_trigger() when desc->set_type() changed the irq chip.

It needs a deeper analysis whether we should refuse to change the chip
on an already enabled irq, but that'd be a large scale change to fix
all the existing users. So that's neither stable nor 2.6.35 material.

Reported-by: Esben Haabendal <eha@doredevelopment.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sched: Fix over-scheduling bug

commit 3c93717cfa51316e4dbb471e7c0f9d243359d5f8 upstream.

Commit e70971591 ("sched: Optimize unused cgroup configuration") introduced
an imbalanced scheduling bug.

If we do not use CGROUP, function update_h_load won't update h_load. When the
system has a large number of tasks far more than logical CPU number, the
incorrect cfs_rq[cpu]->h_load value will cause load_balance() to pull too
many tasks to the local CPU from the busiest CPU. So the busiest CPU keeps
going in a round robin. That will hurt performance.

The issue was found originally by a scientific calculation workload that
developed by Yanmin. With that commit, the workload performance drops
about 40%.

 CPU  before    after

 00   : 2       : 7
 01   : 1       : 7
 02   : 11      : 6
 03   : 12      : 7
 04   : 6       : 6
 05   : 11      : 7
 06   : 10      : 6
 07   : 12      : 7
 08   : 11      : 6
 09   : 12      : 6
 10   : 1       : 6
 11   : 1       : 6
 12   : 6       : 6
 13   : 2       : 6
 14   : 2       : 6
 15   : 1       : 6

Reviewed-by: Yanmin zhang <yanmin.zhang@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1276754893.9452.5442.camel@debian>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sched: Prevent compiler from optimising the sched_avg_update() loop

commit 0d98bb2656e9bd2dfda2d089db1fe1dbdab41504 upstream.

GCC 4.4.1 on ARM has been observed to replace the while loop in
sched_avg_update with a call to uldivmod, resulting in the
following build failure at link-time:

kernel/built-in.o: In function `sched_avg_update':
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
make: *** [.tmp_vmlinux1] Error 1

This patch introduces a fake data hazard to the loop body to
prevent the compiler optimising the loop away.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, Calgary: Limit the max PHB number to 256

commit d596043d71ff0d7b3d0bead19b1d68c55f003093 upstream.

The x3950 family can have as many as 256 PCI buses in a single system, so
change the limits to the maximum.  Since there can only be 256 PCI buses in one
domain, we no longer need the BUG_ON check.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
LKML-Reference: <20100701004519.GQ15515@tux1.beaverton.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, Calgary: Increase max PHB number

commit 499a00e92dd9a75395081f595e681629eb1eebad upstream.

Newer systems (x3950M2) can have 48 PHBs per chassis and 8
chassis, so bump the limits up and provide an explanation
of the requirements for each class.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Corinna Schultz <cschultz@linux.vnet.ibm.com>
LKML-Reference: <20100624212647.GI15515@tux1.beaverton.ibm.com>
[ v2: Fixed build bug, added back PHBS_PER_CALGARY == 4 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix vsyscall on gcc 4.5 with -Os

commit 124482935fb7fb9303c8a8ab930149c6a93d9910 upstream.

This fixes the -Os breaks with gcc 4.5 bug.  rdtsc_barrier needs to be
force inlined, otherwise user space will jump into kernel space and
kill init.

This also addresses http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44129
I believe.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100618210859.GA10913@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

perf: Resurrect flat callchains

commit 97aa1052739c6a06cb6b0467dbf410613d20bc97 upstream.

Initialize the callchain radix tree root correctly.

When we walk through the parents, we must stop after the root, but
since it wasn't well initialized, its parent pointer was random.

Also the number of hits was random because uninitialized, hence it
was part of the callchain while the root doesn't contain anything.

This fixes segfaults and percentages followed by empty callchains
while running:

perf report -g flat

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

amd64-agp: Probe unknown AGP devices the right way

commit 6fd024893911dcb51b4a0aa71971db5ba38f7071 upstream.

The current initialisation code probes 'unsupported' AGP devices
simply by calling its own probe function.  It does not lock these
devices or even check whether another driver is already bound to
them.

We must use the device core to manage this.  So if the specific
device id table didn't match anything and agp_try_unsupported=1,
switch the device id table and call driver_attach() again.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SCSI: aacraid: Eliminate use after free

commit 8a52da632ceb9d8b776494563df579e87b7b586b upstream.

The debugging code using the freed structure is moved before the kfree.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@free@
expression E;
position p;
@@
kfree@p(E)

@@
expression free.E, subE<=free.E, E1;
position free.p;
@@

  kfree@p(E)
  ...
(
  subE = E1
|
* E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT

commit 499031ac8a3df6738f6186ded9da853e8ea18253 upstream.

We should release dst if dst->error is set.

Bug introduced in 2.6.14 by commit e104411b82f5c
([XFRM]: Always release dst_entry on error in xfrm_lookup)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ipvs: Add missing locking during connection table hashing and unhashing

commit aea9d711f3d68c656ad31ab578ecfb0bb5cd7f97 upstream.

The code that hashes and unhashes connections from the connection table
is missing locking of the connection being modified, which opens up a
race condition and results in memory corruption when this race condition
is hit.

Here is what happens in pretty verbose form:

CPU 0 CPU 1
------------ ------------
An active connection is terminated and
we schedule ip_vs_conn_expire() on this
CPU to expire this connection.

IRQ assignment is changed to this CPU,
but the expire timer stays scheduled on
the other CPU.

New connection from same ip:port comes
in right before the timer expires, we
find the inactive connection in our
connection table and get a reference to
it. We proper lock the connection in
tcp_state_transition() and read the
connection flags in set_tcp_state().

ip_vs_conn_expire() gets called, we
unhash the connection from our
connection table and remove the hashed
flag in ip_vs_conn_unhash(), without
proper locking!

While still holding proper locks we
write the connection flags in
set_tcp_state() and this sets the hashed
flag again.

ip_vs_conn_expire() fails to expire the
connection, because the other CPU has
incremented the reference count. We try
to re-insert the connection into our
connection table, but this fails in
ip_vs_conn_hash(), because the hashed
flag has been set by the other CPU. We
re-schedule execution of
ip_vs_conn_expire(). Now this connection
has the hashed flag set, but isn't
actually hashed in our connection table
and has a dangling list_head.

We drop the reference we held on the
connection and schedule the expire timer
for timeouting the connection on this
CPU. Further packets won't be able to
find this connection in our connection
table.

ip_vs_conn_expire() gets called again,
we think it's already hashed, but the
list_head is dangling and while removing
the connection from our connection table
we write to the memory location where
this list_head points to.

The result will probably be a kernel oops at some other point in time.

This race condition is pretty subtle, but it can be triggered remotely.
It needs the IRQ assignment change or another circumstance where packets
coming from the same ip:port for the same service are being processed on
different CPUs. And it involves hitting the exact time at which
ip_vs_conn_expire() gets called. It can be avoided by making sure that
all packets from one connection are always processed on the same CPU and
can be made harder to exploit by changing the connection timeouts to
some custom values.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tpm_tis: fix subsequent suspend failures

commit 59f6fbe4291fcc078ba26ce4edf8373a7620a13a upstream.

Fix subsequent suspends by issuing tpm_continue_selftest during resume.
Otherwise, the tpm chip seems to be not fully initialized and will reject
the save state command during suspend, thus preventing the whole system
to suspend.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: David Safford <safford@watson.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: fix legacy LVDS dpms sequence

commit 15cb02c0a0338ee724bf23e31c7c410ecbffeeba upstream.

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389

Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: add quirk for ASUS HD 3600 board

commit e153b70b89770968a704eda0b55707c6066b2d44 upstream.

Connector is actually DVI rather than HDMI.

Reported-by: trapDoor <trapdoor6@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/r200: handle more hw tex coord types

commit 688acaa2897462e4c5e2482496e2868db0760809 upstream.

Code did not handle projected 2d and depth coordinates, meaning potentially
set 3d or cube special handling might stick.
(Not sure what depth coord actually does, but I guess handling it
like a normal coordinate is the right thing to do.)
Might be related to https://bugs.freedesktop.org/show_bug.cgi?id=26428

Signed-off-by: sroland@vmware.com
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/i915: Make G4X-style PLL search more permissive

commit 6ba770dc5c334aff1c055c8728d34656e0f091e2 upstream.

Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC
reference clock.

More generally, the 0.488% tolerance used before is just too tight to
reliably find a PLL setting.  I extracted the search algorithm and
modified it to find the dot clocks with maximum error over the valid
range for the given output type:

http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c

This gave:

Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571)
Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524)
Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488)
Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529)
Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488)
Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448)
Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478)
Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449)
Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510)

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/i915: enable low power render writes on GEN3 hardware.

commit 944001201ca0196bcdb088129e5866a9f379d08c upstream.

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/i915: Define MI_ARB_STATE bits

commit 45503ded966c98e604c9667c0b458d40666b9ef3 upstream.

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

i915: fix lock imbalance on error path...

commit f953c9353f5fe6e98fa7f32f51060a74d845b5f8 upstream.

While investigating Intel i5 Arrandale GPU lockups with -rc4, I
noticed a lock imbalance.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

dynamic debug: move ddebug_remove_module() down into free_module()

commit b82bab4bbe9efa7bc7177fc20620fff19bd95484 upstream.

The command

echo "file ec.c +p" >/sys/kernel/debug/dynamic_debug/control

causes an oops.

Move the call to ddebug_remove_module() down into free_module().  In this
way it should be called from all error paths.  Currently, we are missing
the remove if the module init routine fails.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

p54pci: add Symbol AP-300 minipci adapters pciid

commit 50900f1698f68127e54c67fdfe829e4a97b1be2b upstream.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Btrfs: fix checks in BTRFS_IOC_CLONE_RANGE

commit 2ebc3464781ad24474abcbd2274e6254689853b5 upstream.

1.  The BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE ioctls should check
whether the donor file is append-only before writing to it.

2.  The BTRFS_IOC_CLONE_RANGE ioctl appears to have an integer
overflow that allows a user to specify an out-of-bounds range to copy
from the source file (if off + len wraps around).  I haven't been able
to successfully exploit this, but I'd imagine that a clever attacker
could use this to read things he shouldn't.  Even if it's not
exploitable, it couldn't hurt to be safe.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mac80211: Handle mesh action frames in ieee80211_rx_h_action

commit 1cb561f83793191cf86a2db3948d28f5f42df9ff upstream.

This fixes the problem introduced in commit
8404080568613d93ad7cf0a16dfb68 which broke mesh peer link establishment.

changes:
v2  Added missing break (Johannes)
v3  Broke original patch into two (Johannes)

Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mac80211: do not wip out old supported rates

commit f0b058b61711ebf5be94d6865ca7b2c259b71d37 upstream.

Use old supported rates, if AP do not provide supported rates
information element in a new managment frame.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>