KVM: x86: fix -DDEBUG oops

Fix a slight error with assertion in local APIC code.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: don't walk every parent pages while mark unsync

While we mark the parent's unsync_child_bitmap, if the parent is already
unsynced, it no need walk it's parent, it can reduce some unnecessary
workload

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: clear unsync_child_bitmap completely

In current code, some page's unsync_child_bitmap is not cleared completely
in mmu_sync_children(), for example, if two PDPEs shard one PDT, one of
PDPE's unsync_child_bitmap is not cleared.

Currently, it not harm anything just little overload, but it's the prepare
work for the later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: cleanup for __mmu_unsync_walk()

Decrease sp->unsync_children after clear unsync_child_bitmap bit

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: don't mark pte notrap if it's just sync transient

If the sync-sp just sync transient, don't mark its pte notrap

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: avoid double write protected in sync page path

The sync page is already write protected in mmu_sync_children(), don't
write protected it again

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: cleanup for dirty page judgment

Using wrap function to cleanup page dirty judgment

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: rename 'page' and 'shadow_page' to 'sp'

Rename 'page' and 'shadow_page' to 'sp' to better fit the context

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86: XSAVE/XRSTOR live migration support

This patch enable save/restore of xsave state.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: PPC: fix build warning in kvm_arch_vcpu_ioctl_run

Fix compile warning:
  CC [M]  arch/powerpc/kvm/powerpc.o
  arch/powerpc/kvm/powerpc.c: In function 'kvm_arch_vcpu_ioctl_run':
  arch/powerpc/kvm/powerpc.c:290: warning: 'gpr' may be used uninitialized in this function
  arch/powerpc/kvm/powerpc.c:290: note: 'gpr' was declared here

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: Fix mov cr3 #GP at wrong instruction

On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: Fix mov cr4 #GP at wrong instruction

On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: Fix mov cr0 #GP at wrong instruction

On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Enable XSAVE/XRSTOR for guest

This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: Fix incorrect rcu deref in rmode_tss_base()

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Fix unused but set warnings

No real bugs in this one.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Fix KVM_SET_SIGNAL_MASK with arg == NULL

When the user passed in a NULL mask pass this on from the ioctl
handler.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: delay local tlb flush

delay local tlb flush until enter guest moden, it can reduce vpid flush
frequency and reduce remote tlb flush IPI(if KVM_REQ_TLB_FLUSH bit is
already set, IPI is not sent)

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: use wrapper function to flush local tlb

Use kvm_mmu_flush_tlb() function instead of calling
kvm_x86_ops->tlb_flush(vcpu) directly.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: remove unnecessary remote tlb flush

This remote tlb flush is no necessary since we have synced while
sp is zapped

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: fix rcu usage warning in init_rmode()

fix:

[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:258 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1
1 lock held by qemu-system-x86/3796:
 #0:  (&vcpu->mutex){+.+.+.}, at: [<ffffffffa0217fd8>] vcpu_load+0x1a/0x66 [kvm]

stack backtrace:
Pid: 3796, comm: qemu-system-x86 Not tainted 2.6.34 #25
Call Trace:
 [<ffffffff81070ed1>] lockdep_rcu_dereference+0x9d/0xa5
 [<ffffffffa0214fdf>] gfn_to_memslot_unaliased+0x65/0xa0 [kvm]
 [<ffffffffa0216139>] gfn_to_hva+0x22/0x4c [kvm]
 [<ffffffffa0216217>] kvm_write_guest_page+0x2a/0x7f [kvm]
 [<ffffffffa0216286>] kvm_clear_guest_page+0x1a/0x1c [kvm]
 [<ffffffffa0278239>] init_rmode+0x3b/0x180 [kvm_intel]
 [<ffffffffa02786ce>] vmx_set_cr0+0x350/0x4d3 [kvm_intel]
 [<ffffffffa02274ff>] kvm_arch_vcpu_ioctl_set_sregs+0x122/0x31a [kvm]
 [<ffffffffa021859c>] kvm_vcpu_ioctl+0x578/0xa3d [kvm]
 [<ffffffff8106624c>] ? cpu_clock+0x2d/0x40
 [<ffffffff810f7d86>] ? fget_light+0x244/0x28e
 [<ffffffff810709b9>] ? trace_hardirqs_off_caller+0x1f/0x10e
 [<ffffffff8110501b>] vfs_ioctl+0x32/0xa6
 [<ffffffff81105597>] do_vfs_ioctl+0x47f/0x4b8
 [<ffffffff813ae654>] ? sub_preempt_count+0xa3/0xb7
 [<ffffffff810f7da8>] ? fget_light+0x266/0x28e
 [<ffffffff810f7c53>] ? fget_light+0x111/0x28e
 [<ffffffff81105617>] sys_ioctl+0x47/0x6a
 [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: rename vpid_sync_vcpu_all() to vpid_sync_vcpu_single()

The name "pid_sync_vcpu_all" isn't appropriate since it just affect
a single vpid, so rename it to vpid_sync_vcpu_single().

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: Add all-context INVVPID type support

Add all-context INVVPID type support.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: reduce remote tlb flush in kvm_mmu_pte_write()

collect remote tlb flush in kvm_mmu_pte_write() path

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: traverse sp hlish safely

Now, we can safely to traverse sp hlish

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: gather remote tlb flush which occurs during page zapped

Using kvm_mmu_prepare_zap_page() and kvm_mmu_zap_page() instead of
kvm_mmu_zap_page() that can reduce remote tlb flush IPI

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: don't get free page number in the loop

In the later patch, we will modify sp's zapping way like below:

kvm_mmu_prepare_zap_page A
kvm_mmu_prepare_zap_page B
kvm_mmu_prepare_zap_page C
....
kvm_mmu_commit_zap_page

[ zaped multiple sps only need to call kvm_mmu_commit_zap_page once ]

In __kvm_mmu_free_some_pages() function, the free page number is
getted form 'vcpu->kvm->arch.n_free_mmu_pages' in loop, it will
hinders us to apply kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page()
since kvm_mmu_prepare_zap_page() not free sp.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: split the operations of kvm_mmu_zap_page()

Using kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page() to
split kvm_mmu_zap_page() function, then we can:

- traverse hlist safely
- easily to gather remote tlb flush which occurs during page zapped

Those feature can be used in the later patches

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: introduce some macros to cleanup hlist traverseing

Introduce for_each_gfn_sp() and for_each_gfn_indirect_valid_sp() to
cleanup hlist traverseing

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: skip invalid sp when unprotect page

In kvm_mmu_unprotect_page(), the invalid sp can be skipped

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: Make sure single type invvpid is supported before issuing invvpid instruction

According to SDM, we need check whether single-context INVVPID type is supported
before issuing invvpid instruction.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86: use linux/uaccess.h instead of asm/uaccess.h

Should use linux/uaccess.h instead of asm/uaccess.h

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: cleanup "*new.rmap" type

The type of '*new.rmap' is not 'struct page *', fix it

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Enforce EPT pagetable level checking

We only support 4 levels EPT pagetable now.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: Add Documentation/kvm/msr.txt

This patch adds a file that documents the usage of KVM-specific
MSRs.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: PPC: elide struct thread_struct instances from stack

Instead of instantiating a whole thread_struct on the stack use only the
required parts of it.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Properly return error to userspace on vmentry failure

The vmexit handler returns KVM_EXIT_UNKNOWN since there is no handler
for vmentry failures. This intercepts vmentry failures and returns
KVM_FAIL_ENTRY to userspace instead.

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: Don't calculate quadrant if tdp_enabled

There's no need to calculate quadrant if tdp is enabled.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: Document large pages

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: Document cr0.wp emulation

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: Allow spte.w=1 for gpte.w=0 and cr0.wp=0 only in shadow mode

When tdp is enabled, the guest's cr0.wp shouldn't have any effect on spte
permissions.

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86: Propagate fpu_alloc errors

Memory allocation may fail. Propagate such errors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: SVM: Fix EFER.LME being stripped

Must set VCPU register to be the guest notion of EFER even if that
setting is not valid on hardware.  This was masked by the set in
set_efer until 7657fd5ace88e8092f5f3a84117e093d7b893f26 broke that.
Fix is simply to set the VCPU register before stripping bits.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: don't check PT_WRITABLE_MASK directly

Since we have is_writable_pte(), make use of it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: calculate correct gfn for small host pages backing large guest pages

In Documentation/kvm/mmu.txt:
  gfn:
    Either the guest page table containing the translations shadowed by this
    page, or the base page frame for linear translations. See role.direct.

But in function FNAME(fetch)(), sp->gfn is incorrect when one of following
situations occurred:

 1) guest is 32bit paging and the guest PDE maps a 4-MByte page
    (backed by 4k host pages), FNAME(fetch)() miss handling the quadrant.

    And if guest use pse-36, "table_gfn = gpte_to_gfn(gw->ptes[level - delta]);"
    is incorrect.

 2) guest is long mode paging and the guest PDPTE maps a 1-GByte page
    (backed by 4k or 2M host pages).

So we fix it to suit to the document and suit to the code which
requires sp->gfn correct when sp->role.direct=1.

We use the goal mapping gfn(gw->gfn) to calculate the base page frame
for linear translations, it is simple and easy to be understood.

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: Calculate correct base gfn for direct non-DIR level

In Document/kvm/mmu.txt:
  gfn:
    Either the guest page table containing the translations shadowed by this
    page, or the base page frame for linear translations. See role.direct.

But in __direct_map(), the base gfn calculation is incorrect,
it does not calculate correctly when level=3 or 4.

Fix by using PT64_LVL_ADDR_MASK() which accounts for all levels correctly.

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: Don't allocate gfns page for direct mmu pages

When sp->role.direct is set, sp->gfns does not contain any essential
information, leaf sptes reachable from this sp are for a continuous
guest physical memory range (a linear range).
So sp->gfns[i] (if it was set) equals to sp->gfn + i. (PT_PAGE_TABLE_LEVEL)
Obviously, it is not essential information, we can calculate it when need.

It means we don't need sp->gfns when sp->role.direct=1,
Thus we can save one page usage for every kvm_mmu_page.

Note:
  Access to sp->gfns must be wrapped by kvm_mmu_page_get_gfn()
  or kvm_mmu_page_set_gfn().
  It is only exposed in FNAME(sync_page).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: VMX: Add constant for invalid guest state exit reason

For the sake of completeness, this patch adds a symbolic
constant for VMX exit reason 0x21 (invalid guest state).

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: allow more page become unsync at getting sp time

Allow more page become asynchronous at getting sp time, if need create new
shadow page for gfn but it not allow unsync(level > 1), we should unsync all
gfn's unsync page

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: allow more page become unsync at gfn mapping time

In current code, shadow page can become asynchronous only if one
shadow page for a gfn, this rule is too strict, in fact, we can
let all last mapping page(i.e, it's the pte page) become unsync,
and sync them at invlpg or flush tlb time.

This patch allow more page become asynchronous at gfn mapping time

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Update Red Hat copyrights

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: SVM: correctly trace irq injection

On SVM interrupts are injected by svm_set_irq() not svm_inject_irq().
The later is used only to wait for irq window.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: only update unsync page in invlpg path

Only unsync pages need updated at invlpg time since other shadow
pages are write-protected

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: don't write-protect if have new mapping to unsync page

Two cases maybe happen in kvm_mmu_get_page() function:

- one case is, the goal sp is already in cache, if the sp is unsync,
  we only need update it to assure this mapping is valid, but not
  mark it sync and not write-protect sp->gfn since it not broke unsync
  rule(one shadow page for a gfn)

- another case is, the goal sp not existed, we need create a new sp
  for gfn, i.e, gfn (may)has another shadow page, to keep unsync rule,
  we should sync(mark sync and write-protect) gfn's unsync shadow page.
  After enabling multiple unsync shadows, we sync those shadow pages
  only when the new sp not allow to become unsync(also for the unsyc
  rule, the new rule is: allow all pte page become unsync)

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: split kvm_sync_page() function

Split kvm_sync_page() into kvm_sync_page() and kvm_sync_page_transient()
to clarify the code address Avi's suggestion

kvm_sync_page_transient() function only update shadow page but not mark
it sync and not write protect sp->gfn. it will be used by later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86: Use FPU API

Convert KVM to use generic FPU API.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86: Use unlazy_fpu() for host FPU

We can avoid unnecessary fpu load when userspace process
didn't use FPU frequently.

Derived from Avi's idea.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

x86: Export FPU API for KVM use

Also add some constants.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Consolidate arch specific vcpu ioctl locking

Now that all arch specific ioctls have centralized locking, it is easy to
move it to the central dispatcher.

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: PPC: Centralize locking of arch specific vcpu ioctls

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: s390: Centrally lock arch specific vcpu ioctls

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86: Lock arch specific vcpu ioctls centrally

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: move vcpu locking to dispatcher for generic vcpu ioctls

All vcpu ioctls need to be locked, so instead of locking each one specifically
we lock at the generic dispatcher.

This patch only updates generic ioctls and leaves arch specific ioctls alone.

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86: cleanup unused local variable

fix:
 arch/x86/kvm/x86.c: In function ‘handle_emulation_failure’:
 arch/x86/kvm/x86.c:3844: warning: unused variable ‘ctxt’

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: unalias gfn before sp->gfns[] comparison in sync_page

sp->gfns[] contain unaliased gfns, but gpte might contain pointer
to aliased region.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: remove rmap before clear spte

Remove rmap before clear spte otherwise it will trigger BUG_ON() in
some functions such as rmap_write_protect().

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: use proper cache object freeing function

Use kmem_cache_free to free objects allocated by kmem_cache_alloc.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: remove CAP_SYS_RAWIO requirement from kvm_vm_ioctl_assign_irq

Remove this check in an effort to allow kvm guests to run without
root privileges.  This capability check doesn't seem to add any
security since the device needs to have already been added via the
assign device ioctl and the io actually occurs through the pci
sysfs interface.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Only reset MMU when necessary

Only modifying some bits of CR0/CR4 needs paging mode switch.

Modify EFER.NXE bit would result in reserved bit updates.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86: Clean up duplicate assignment

mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the
destory_kvm_mmu().

kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to
vcpu->arch.cr4/efer, no need to do it again later.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86 emulator: Add missing decoder flags for xor instructions

This adds missing decoder flags for xor instructions (opcodes 0x34 - 0x35)

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86 emulator: Add missing decoder flags for sub instruction

This adds missing decoder flags for sub instructions (opcodes 0x2c - 0x2d)

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: x86 emulator: Add test acc, imm instruction (opcodes 0xA8 - 0xA9)

This adds test acc, imm instruction to the x86 emulator

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: pass correct parameter to kvm_mmu_free_some_pages

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: VMXON/VMXOFF usage changes

SDM suggests VMXON should be called before VMPTRLD, and VMXOFF
should be called after doing VMCLEAR.

Therefore in vmm coexistence case, we should firstly call VMXON
before any VMCS operation, and then call VMXOFF after the
operation is done.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: VMCLEAR/VMPTRLD usage changes

Originally VMCLEAR/VMPTRLD is called on vcpu migration. To
support hosted VMM coexistance, VMCLEAR is executed on vcpu
schedule out, and VMPTRLD is executed on vcpu schedule in.
This could also eliminate the IPI when doing VMCLEAR.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Some minor changes to code structure

Do some preparations for vmm coexistence support.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: VMX: Define new functions to wrapper direct call of asm code

Define vmcs_load() and kvm_cpu_vmxon() to avoid direct call of asm
code. Also move VMXE bit operation out of kvm_cpu_vmxoff().

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: update mmu documetation for role.nxe

There's no member "cr4_nxe" in struct kvm_mmu_page_role, it names "nxe" now.
Update mmu document.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: MMU: Fix free memory accounting race in mmu_alloc_roots()

We drop the mmu lock between freeing memory and allocating the roots; this
allows some other vcpu to sneak in and allocate memory.

While the race is benign (resulting only in temporary overallocation, not oom)
it is simple and easy to fix by moving the freeing close to the allocation.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: inject #UD if instruction emulation fails and exit to userspace

Do not kill VM when instruction emulation fails. Inject #UD and report
failure to userspace instead. Userspace may choose to reenter guest if
vcpu is in userspace (cpl == 3) in which case guest OS will kill
offending process and continue running.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

KVM: Document KVM_SET_BOOT_CPU_ID

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Document KVM_SET_IDENTITY_MAP ioctl

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed

Currently, kvm_mmu_zap_page() returning the number of freed children sp.
This might confuse the caller, because caller don't know the actual freed
number. Let's make kvm_mmu_zap_page() return the number of pages it actually
freed.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: Fix debug output error in walk_addr()

Fix a debug output error in walk_addr

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: MMU: mark page table dirty when a pte is actually modified

Sometime cmpxchg_gpte doesn't modify gpte, in such case, don't mark
page table page as dirty.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: SVM: Allow EFER.LMSLE to be set with nested svm

This patch enables setting of efer bit 13 which is allowed
in all SVM capable processors. This is necessary for the
SLES11 version of Xen 4.0 to boot with nested svm.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: SVM: Dump vmcb contents on failed vmrun

This patch adds a function to dump the vmcb into the kernel
log and calls it after a failed vmrun to ease debugging.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: Get rid of KVM_REQ_KICK

KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation.  This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.

Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.

Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: do not inject exception directly into vcpu

Return exception as a result of instruction emulation and handle
injection in KVM code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: move interruptibility state tracking out of emulator

Emulator shouldn't access vcpu directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: handle shadowed registers outside emulator

Emulator shouldn't access vcpu directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: use shadowed register in emulate_sysexit()

emulate_sysexit() should use shadowed registers copy instead of
looking into vcpu state directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: set RFLAGS outside x86 emulator code

Removes the need for set_flags() callback.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: advance RIP outside x86 emulator code

Return new RIP as part of instruction emulation result instead of
updating KVM's RIP from x86 emulator code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: handle emulation failure case first

If emulation failed return immediately.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: do not inject #PF in (read|write)_emulated() callbacks

Return error to x86 emulator instead of injection exception behind its back.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: remove export of emulator_write_emulated()

It is not called directly outside of the file it's defined in anymore.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: x86 emulator: x86_emulate_insn() return -1 only in case of emulation failure

Currently emulator returns -1 when emulation failed or IO is needed.
Caller tries to guess whether emulation failed by looking at other
variables. Make it easier for caller to recognise error condition by
always returning -1 in case of failure. For this new emulator
internal return value X86EMUL_IO_NEEDED is introduced. It is used to
distinguish between error condition (which returns X86EMUL_UNHANDLEABLE)
and condition that requires IO exit to userspace to continue emulation.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

KVM: fill in run->mmio details in (read|write)_emulated function

Fill in run->mmio details in (read|write)_emulated function just like
pio does. There is no point in filling only vcpu fields there just to
copy them into vcpu->run a little bit later.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>