ALSA: hda - Add support for Lenovo 3000 N200

Added the model entry (model=lenovo) for Lenovo N3000 N200 laptop
with ALC861-VD.  Reference below:
https://bugzilla.novell.com/show_bug.cgi?id=406425

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Fix warning from strict_strtoul()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: AC97 codec PM

Simple suspend/resume for AC97 ASoC codec.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Acked-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Make pop/click debug wait times dynamically configurable

DAPM supports adding a compile time configurable delay to the widget power
sequences, aiding diagnosis of problems with pops and clicks being
generated during them. This patch converts this to be configurable at run
time via a sysfs file.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Advertise 16000Hz rate for WM9713 PCM interface

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ac97 - fix patch_ucb1400 for proper resume

Replace 'snd_ac97_write' with snd_ac97_write_cache' in pacth_ucb1400 to allow
proper codec wakeup.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ALSA: hda - Fix speaker output on Toshiba P105

Toshiba Satellite P105 with cx5045 has no HP pin but only a
speaker pin and does the speaker-muting on hardware.
Thus the matching model is laptop-micsense.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Add missing Thinkpad Z60m support

Added the missing SSID of Thinkpad Z60m for model=thinkpad with
AD1981HD.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ALSA: hda - Fix ALC883 medion model

ALC883 medion model doesn't unmute the proper amps so no output can be heard.
Replaced the mute switches to behave just like other models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: TLV320AIC3X: Add mixer control for ADC highpass filter

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: Fix AC97 power down

Some laptops don't like PR3 powerdown.  Do PR3 powerdown only
for the real power-saving.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: via82xx - Add VIA audio device #1841 to ac97_quirk list

Signed-off-by: Walter Sheets <w41ter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: Release v1.0.17rc3

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - disable amp override on non-HP machines

Some machines with Cx5045 seem to have no problem with the volume
over 0dB on NID 0x17.  Disable amp overrides for other devices but HP.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ymfpci - fix initial volume for 44.1kHz output

YDSXGR_BUF441OUTVOL register isn't initialized properly.  This may lead to
a silent output at full volume of unchanged "Wave Playback Volume".
http://bugzilla.kernel.org/show_bug.cgi?id=10963

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Add MacBook 3.1 support

MacBook 3.1 is compatible with model=mbp3.
Added the codec SSID 10b6:3600.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add digital mic configuration to N810 machine driver

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: TLV320AIC3X: Add support for digital microphone input

AIC33 and AIC34 codecs in TLV320AIC3x family support digital microphone
input. When enabled, the codec ADC takes bitstream input to low-pass
filter from GPIO2 instead of its own delta-sigma modulator while providing
oversampling clock through GPIO1.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: TLV320AIC3X: Modify only interface related bits in aic3x_set_dai_fmt

Those two serial data interface control register bits have also other
functions and they can be set before aic3x_set_dai_fmt is called.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: TLV320AIC3X: Use register modifier widget for mic bias

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add support for generic DAPM register modifier widget

This generic register modifier widget is for updating multiple codec
register bits at once when the widget changes its power state.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Replace custom debug macros with pr_ equivalents

Several ASoC codec drivers use custom macros equivalent to the standard
pr_ macros, most of which are not actually used. Replace these custom
macros with the standard ones.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add AK4535 driver

The AK4535 codec is included in some HP iPAQ systems.

This driver was originally written by Richard Purdie and with some bug
fixes from Milan Plzik.  While out of tree it has also had some
mechanical updates for new APIs and current best practices from Liam
Girdwood, Graeme Gregory and Mark Brown.

Signed-off-by: Richard Purdie <richard@openedhand.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: PCI168 snd-azt3328: some more fixups

- fix problem with codec register 0x6a being write-only
  by adding a software shadow register
  (caused annoying noise after module loading due to _toggling_
  between gameport and audio bits instead of configuring them properly)
- rename several "Wave" mixer controls to "PCM", since this is
  what Wine and several other apps are looking for (IOW, _requiring_)
  and this is what AC97 specs use as naming, too,
  thus I'd guess it's what these controls are
- cleanup, small optimizations

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: trident - pause s/pdif output

Stop the S/PDIF DMA engine and output when the device is told to pause.
It will keep on looping the current buffer contents if this isn't done.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Tested-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Added SSID for 'Fujitsu Siemens Amilo M1451G' laptop

Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to
patch_realtek.c , so that it uses ALC880_FUJITSU by default.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Added model selection for iMac 24"

Added the SSID of a known iMac 24" to automatically use
ALC885_IMAC24 quirk.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] Revert "alsa: add annotations to bitwise type snd_pcm_hw_param_t"

This reverts commit 36b34d2437104f323e09d7c6af6451d3c0b9c0cd.

From: Al Viro <viro@ZenIV.linux.org.uk>

WIW, *all* this stuff is not bitwise at all.  For crying out loud, half
of these types are routinely used as array indices and loop variables...

If anything, we want a different set of allowed operations - subtraction
between elements of type (yielding integer), addition/subtraction of
integer types not bigger than ours (yielding our type), comparisons,
assignments (=, +=, -=, passing to function as argument, return from
function, initializers) and second/third arguments in ?:.  With 0 *not*
being allowed as a constant of such type.

It's not bitwise; we may use the same infrastructure in sparse, but it
should be a separate class of types (__attribute__((affine))).

dma_addr_t is another candidate for the same treatment, but there we'll
need helpers for conversions to hw-acceptable form (dma_to_le32(), etc.)
and gradual conversion of drivers.

ALSA ones and pm mess are absolutely straightforward cases, though.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Fix digital converter proc output

AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved.
The whole SIC bits are returned from DIGI_CONVERT_1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

alsa: add annotations to bitwise type snd_pcm_hw_param_t

Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading
to integer type, this goes a long way towards eliminating them.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: fix PM=n build

Fix sound/soc build failure when CONFIG_PM=n:

linux-next-20080617/sound/soc/soc-core.c:829: error: 'soc_resume_deferred' undeclared (first use in this function)
soc3.out:make[3]: *** [sound/soc/soc-core.o] Error 1

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ca0106 - Add entry for another MSI K8N Diamond MB

Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Fix wrong volumes in AD1988 auto-probe mode

Don't create mixer volume elements for Headphone and Speaker if they
use the same DAC as normal line-outs on AD1988.  Otherwise the amp
value gets screwed up, e.g.
https://bugzilla.novell.com/show_bug.cgi?id=398255

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: Fix register programming in Freescale MPC8610 HPCD sound driver

Fix the Freescale MPC8610 HPCD sound driver so that it programs the DMACR
and PMUXCR registers in the global utilities correctly.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: emu10k1 - simplify the last fix

Clean up the previous commit for fixing memory leaks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1 - fix possible memory leak in memory allocation routines

The leak was introduced in "[ALSA] emu10k1 - simplify page allocation
for synth" commit.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: Remove duplicate MODULE_AUTHOR/DESCRIPTION/LICENCE from snd-ens1370.ko

But comment only extra code in ak4531_codec.c for history.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: Release 1.0.17rc2

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - use upper_32_bits()

Use the standard upper_32_bits() instead of own macro.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - bdl_pos_adj=32 as default

Use bdl_pos_adj=32 as default except for Intel hardwares confirmed
to work with bdl_pos_adj=1.  Looks like ATI and NVidia require this
higher value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Don't block system resume

On OpenMoko soc-audio resume is taking 700ms of the whole resume time of
1.3s, dominated by writes to the codec over I2C.  This patch shunts the
resume guts into a workqueue which then is done asynchronously.

The "card" is locked using the ALSA power state APIs as suggested by
Mark Brown.

[Added fix for race with resume to suspend and fixed a couple of nits
from checkpatch -- broonie.]

Signed-off-by: Andy Green <andy@openmoko.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Check for exact register match in wm97xx_reset()

To provide added robustness in case an AC97 controller reads back all
zeros in error cases check for an exact match when testing to see if
resets have brought the codec back.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda: Add support for 92HD73xxx codecs

Added support for new family of IDT codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: make snd_ctl_elem_read() and snd_ctl_elem_write() static

snd_ctl_elem_read() and snd_ctl_elem_write() are no longer used by
any other drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Remove unused mutex

Removed unused mutex from patch_*.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Fix stac9205_cfg_tbl

Sort stac9205_cfg_table in the order of id numbers, and removed the
duplicated (obsoleted) entries for 0x01fc and 0x01fd.  This doesn't
change the driver behavior since the old entries are all secondary.

The duplication occured due to commit dfe495d0, and the old entries
were introduced by commit ae0a8ed8.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Cover also Nokia N810 WiMAX Edition in N810 machine driver

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add TLV information to the LM4857 controls on the GTA01

Signed-off-by: Mike Montour <mail@mmontour.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add SOC_SINGLE_EXT_TLV control type

Signed-off-by: Mike Montour <mail@mmontour.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add TLV information to remaining WM8753 controls

Signed-off-by: Mike Montour <mail@mmontour.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Fix WM9713 voice PCM slave mode configuration

Reported-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Pass the DAI being configured into CPU DAI probe and remove

This allows per-DAI initialisation to be done by the CPU DAI drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Add missing includes

Ensure that DAIs are prototyped in the codec drivers that define them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Tweak tlv320aicx reg_cache_size

ASoC codec drivers frequently set the register cache size using sizeof()
rather than ARRAY_SIZE(). For tlv320aicx either is correct since the
registers are 8 bit but update to use ARRAY_SIZE() for clarity.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Fix register cache size for UDA1380

The register cache size is used by the codec_reg sysfs file which works in
terms of the register cache access functions rather than in terms of raw
access to the cache so the size specified needs to be in terms of the
number of elements.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: ASoC: Fix register cache sizes for Wolfson codecs

The register cache size is used by the codec_reg sysfs file which works in
terms of the register cache access functions rather than in terms of raw
access to the cache so the size specified needs to be in terms of the
number of elements.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: opti93x: use cs4231 lib

This patch converts the Opti93x driver to use
the cs4231 library instead of duplicating the code.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: opti93x: add support for Opti93x codec in cs4231-lib

This patch adds support for WSS compatible Opti93x
codec to the cs4231-lib.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Add a warning if pending IRQ is found

The pending IRQ handling is a very hackish workaround and should be
avoided as much as possible via a larger bdl_pos_adj option value.
Put a warning message if this situation occurs so that the user may have
a chance to notice that something is wrong.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Add description of bdl_pos_adj option

Added a brief description of the new bdl_pos_adj option to
ALSA-Configuration.txt.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Fix bdl_pos_adj value for ATI SB chipsets

ATI SB controllers seem to report the DMA ahead in the amount of FIFO.
Thus bdl_pos_adj should be 32 for them as default.

Also, the default value is set to -1, which means to make the driver
to choose the appropriate value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - bdl_pos_adj option to each instance

The option bdl_pos_adj should be provided for each card instance instead of
a global one because the value depends rather on each controller-chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - remove position_fix=3

position_fix=3 is the option to correct the DMA position with the
FIFO size.  But, it never worked correctly, and we have now more other
workarounds for the DMA position fixes.  Thus better to remove it.

Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role
better.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: hda - Add bdl_pos_adj option

Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup
timing.

Most HD-audio hardwares have a problem that a BDL IRQ is issued before
actually the data and the DMA pointer are updated.
We have already a mechanism to force to delay snd_pcm_period_elapsed()
calls via workq, but this costs much CPU, and typically the delay is
within one sample.  Thus, it's more clever to adjust the BDL entries
instead.

The new option adds the size of the delay in frames.  As default,
it's set to 1 -- that is, one sample delay.  Even the hardware is
really correct, one sample delay is relatively harmless in comparison
with reporting wrong positions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

sound: sound/oss/dmasound/: cleanups

This patch contains the following cleanups:
- make the following needlessly global functions static:
  - dmasound_core.c: get_afmt_string()
  - dmasound_paula.c: dmasound_paula_init()
  - dmasound_q40.c: dmasound_q40_init()
- remove the following unused global variable:
  - dmasound_core.c: software_input_volume

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: emu10k1 - Fix page allocation with GFP_DMA

Added the missing GFP_ATOMIC to page_alloc when called with GFP_DMA.
GFP_KERNEL often results in stalls for ZONE_DMA, so GFP_ATOMIC is more
prgmatic.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] hda - Add Toshiba dynabook SS RX1 support

I have Toshiba dynabook SS RX1 and this patch adds that support.

Signed-off-by: Akio Idehara <zbe64533@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] opti93x: fix sound ouput for Opti930

This patch fixes silenced output from the Opti930.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ac97 - Fix power_save option value as time-out

The power_save option was set as boot although it was meant to be a
timeout value like the same option of snd-hda-intel originally.
Now fixed to the same style.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ASoC: Fix default mono mixer configuration for WM8510

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] ac97: add support for wm9711 master left inv switch

This patch adds support for Master Left Inv Switch on wm9711.
At least required to drive the mono speaker on the PXA270 platfrom

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA: make sparc/dbri.c:snd_dbri_proc() static

This patch makes the needlessly global snd_dbri_proc() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] usbaudio.c: remove #ifndef CONFIG_USB_EHCI_SPLIT_ISO code

Since USB_EHCI_SPLIT_ISO is now unconditionally enabled the
#ifndef CONFIG_USB_EHCI_SPLIT_ISO became wrong.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] remove SND_GUS_SYNTH

After the removal of the sequencer instrument layer SND_GUS_SYNTH was
no longer used.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Revised AT32 ASoC Patch

Attached is a revised version of my patch to add AT32 to ASoC.  This cleans
most of the style issues associated with the previous patch.  Also fixes an
issue with the playpaq_wm8510.c code depending on a non-released patch to th
AT32 portmux support.

Patch is against 2.6.24.3.atmel.3 kernel, the latest AVR32 kernel Atmel has
released, with the linux-2.6-asoc patches from when v2.6.24 was tagged also
applied.

[Fixed up minor checkpatch issues and updated for current kernels -- broonie]

Signed-off-by: Geoffrey Wossum <gwossum@acm.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] ASoC: Add WM8990 driver

The WM8990 is a highly integrated ultra-low power hi-fi codec designed
for handsets rich in multimedia features such as mobile TV, digital
audio playback and gaming.

The bulk of this driver was written by Liam Girdwood with some
additional development and updates for new ASoC APIs by me.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] ASoC: Add WM8510 driver

The WM8510 is a mono CODEC with speaker driver optimised for telephony
applications, featuring:
 - 16/20/24/32 bit audio at data rates between 8kHz and 48kHz
 - On-chip PLL
 - Dual microphone inputs

This driver was originally written by Liam Girdwood with updates from
Brett Saunders, Geoffrey Wossum and myself.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Brett Saunders <breton.saunders@ntlworld.com>
Signed-off-by: Geoffrey Wossum <geoffrey@pager.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] maestro3: Fix hw volume on HP OmniBook

Make the hw volume buttons work correctly on some HP OmniBook laptops.
The original quirk was apparently applied a bit too early and it was
also lacking some critial register writes. This improved sequence was
discovered by trial and error (like the original sequence). Tested and
found working on OB500 and OB6000 laptops.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - increase max_codecs of ICH to 4

It turned out that some ICH9-based boards use SD3 for the audio codec
where the current driver code doesn't probe.  Since we have a better
codec slot check now, it must be safe to increase this to 4.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Fix PLL gating control on Realtek codecs

On some Realtek codecs, the analog PLL gating control bit must be set
off while the default value is 1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - support intel DG33 motherboards

These two motherboards's pin configuration are not covered by driver.
I wrote a new model to support them.

Signed-off-by: Jiang zhe <zhe.jiang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: Release v1.0.17rc1

Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] emu10k1 - Fix inverted Analog/Digital mixer switch on Audigy2

On Audigy2 Platinum, the Analog/Digital mixer switch is inverted.
https://bugzilla.novell.com/show_bug.cgi?id=396204

The patch adds a simple workaround.

There might be another device requiring a similar fix, too (or fix for
audigy2 generically), but right now I fix only the known broken one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] emu10k1 - simplify page allocation for synth

Simplify the page allocation of emu10k1 driver for emux synth support.
Since these pages aren't be necessarily coherent, we can avoid
expensive DMA-coherent routines.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] trivial clean up of sound/isa/sb/Makefile

Remove unneeded sort in sound/isa/sb/Makefile.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound: Clean up sound/oss/Kconfig

Removed unnecessary dependencies, fix a wrong selection, and
make CONFIG_SOUND_OSS menuconfig to simplify.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] trident - clean up obsolete synth codes

Clean up the unused synth codes in the memory handling of trident driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Make ak4531 local to ens1370 driver

The ak4531 module is used only by ens1370 driver (and unlikely that
any other will use it ever).  Let's make it local to ens1370.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Clean up sound/pci/ac97/Makefile

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] ASoC: Add UDA1380 driver

The UDA1380 codec is used by the HTC Magician and a number of Samsung
reference boards.

This driver has had a long out of tree history, having originally been
written by Giorgio Padrin and converted to ASoC by Richard Purdie.
Since conversion to ASoC most of the work on the driver has been done by
Philipp Zabel with some review and updates for new APIs by Liam Girdwood
and Mark Brown.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] ASoC: Add SOC_DOUBLE_S8_TLV control type

The SOC_DOUBLE_S8_TLV control type was originally implemented in the
UDA1380 driver by Philipp Zabel and was moved into the core by me.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Improve the slots option handling

Fix and improve the slots option handling.  The sound core tries to
find the slot with the given module name first and assign if it's
still available.  If all pre-given slots are unavailable, then try
to find another free slot.

Also, when a module name begins with '!', it means the negative match:
the slot will be given for any modules but that one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Fix EAPD and COEF setups for realtek codecs

Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - show correct codec chip in PCM stream names

Show more exact codec chip name in the PCM stream name strings.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Fix vref pincap check in alc882 auto-detection

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Add ALC663 support

Added the support of ALC663 codec, including specific models for
ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Add ICH9 controller support (8086:2911)

Added the missing PCI ID for ICH9 controller (8086:2911)

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] hda - Add support of Teradici controller

Add the new PCI ID 0x6549 0x1200 Teradici controller.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Add EM-X270 ASoC driver

This patch adds ASoC support for EM-X270 machine.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE

Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to
represent its meaning more better.  This config isn't provided only
for the detection but for more verbose debug prints in general.

Signed-off-by: Takashi Iwai <tiwai@suse.de>