ds1001b: defconfig sync with sdk to support android 4.1

Merge remote-tracking branch 'origin/develop-3.0' into develop-3.0-jb

phonepad:add sew868

phonepad:fix 3g driver

add phonepad board support

to support JB three buffer

add ds1001b product

update arm and logic voltage,
from product experiment
v2

rk: cpufreq_stats.c: fix boot time crash

fix this bug:
[    2.300817] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    2.308902] pgd = c0404000
[    2.311615] [00000000] *pgd=00000000
[    2.315198] Internal error: Oops: 5 [#1] PREEMPT SMP
[    2.320157] CPU: 1    Not tainted  (3.0.8+ #70)
[    2.324689] PC is at cpufreq_stat_notifier_trans+0x40/0xa8
[    2.330169] LR is at notifier_call_chain+0x2c/0x70
[    2.334954] pc : [<c06ce1d4>]    lr : [<c0481440>]    psr: 80000013
[    2.334959] sp : eee47e50  ip : c0a13104  fp : 30a32c00
[    2.346424] r10: eee47ec8  r9 : 00118c30  r8 : 00000000
[    2.351641] r7 : fffffffc  r6 : 00000000  r5 : ed8c1d80  r4 : 00000000
[    2.358158] r3 : 00000009  r2 : 000f6180  r1 : 00000000  r0 : 00000000
[    2.364678] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    2.371976] Control: 10c53c7d  Table: 6040404a  DAC: 00000015
[    2.377712]
[    2.924838] [<c06ce1d4>] (cpufreq_stat_notifier_trans+0x40/0xa8) from [<c0481440>] (notifier_call_chain+0x2c/0x70)
[    2.935178] [<c0481440>] (notifier_call_chain+0x2c/0x70) from [<c04815a0>] (__srcu_notifier_call_chain+0x40/0x58)
[    2.945430] [<c04815a0>] (__srcu_notifier_call_chain+0x40/0x58) from [<c04815cc>] (srcu_notifier_call_chain+0x14/0x18)
[    2.956115] [<c04815cc>] (srcu_notifier_call_chain+0x14/0x18) from [<c06cccd8>] (cpufreq_notify_transition+0xb4/0xe8)
[    2.966721] [<c06cccd8>] (cpufreq_notify_transition+0xb4/0xe8) from [<c044b584>] (cpufreq_scale_rate_for_dvfs+0x10c/0x164)
[    2.977755] [<c044b584>] (cpufreq_scale_rate_for_dvfs+0x10c/0x164) from [<c044cb94>] (dvfs_target_cpu+0x378/0x67c)
[    2.988093] [<c044cb94>] (dvfs_target_cpu+0x378/0x67c) from [<c044c1dc>] (dvfs_set_rate+0x48/0x68)
[    2.997044] [<c044c1dc>] (dvfs_set_rate+0x48/0x68) from [<c044b1f0>] (rk30_target+0x1a8/0x200)
[    3.005648] [<c044b1f0>] (rk30_target+0x1a8/0x200) from [<c06cbff0>] (__cpufreq_driver_target+0x4c/0x60)
[    3.015121] [<c06cbff0>] (__cpufreq_driver_target+0x4c/0x60) from [<c06d05ec>] (cpufreq_interactive_up_task+0x128/0x184)
[    3.025981] [<c06d05ec>] (cpufreq_interactive_up_task+0x128/0x184) from [<c047c3d0>] (kthread+0x80/0x88)
[    3.035453] [<c047c3d0>] (kthread+0x80/0x88) from [<c04375f8>] (kernel_thread_exit+0x0/0x8)
[    3.043796] Code: e5956018 e5953010 ea000004 e5951020 (e7911104)

Revert "rk30: clock: disable pd_vio gating function before rga, lcdc, cif support properly"

This reverts commit 2186d7743ad119ca8b5eea702970463fe4aba3df.

rkfb:add three buffer support for menuconfig,redefine  FBIOPUT_NUM_BUFFERS     0x4625

rkfb:add ioctl to get buffers number

turn of lcdc power domain and clk in earyl suspend

Merge remote-tracking branch 'origin/develop-3.0' into develop-3.0-jb

fix bugs of early suspend when display_pd is closed.

rk: move CLK_SWITCH_TO_32K config from mach-rk30 to plat-rk

rkfb:use macro HDMI_HPD_ACTIVED to judge HDMI plug or not

rk30fb :fix a bug in rk_fb_switch_screeen

after close lcdc the hdmi used ,return directly

Merge remote-tracking branch 'origin/develop-3.0' into develop-3.0-jb

rk30: ddr.c: always compile with Os, else may hung on boot

rk30: sdk: defconfig: sync with last tuna/grouper defconfig

rk: switch to toolchain gcc-4.4.3

update arm and logic voltage,
from product experiment

Merge remote-tracking branch 'stable/linux-3.0.y' into develop-3.0-jb

Conflicts:
drivers/net/usb/asix.c
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
drivers/usb/serial/option.c

Merge remote-tracking branch 'common/android-3.0' into develop-3.0-jb

Conflicts:
drivers/cpufreq/cpufreq_interactive.c
drivers/misc/pmem.c
drivers/net/usb/asix.c
drivers/net/wireless/ath/ath9k/ani.c
drivers/net/wireless/ath/ath9k/ar5008_phy.c
drivers/net/wireless/ath/ath9k/ar9002_hw.c
drivers/net/wireless/ath/ath9k/ar9003_calib.c
drivers/net/wireless/ath/ath9k/ar9003_mac.c
drivers/net/wireless/ath/ath9k/ar9003_phy.h
drivers/net/wireless/ath/ath9k/calib.c
drivers/net/wireless/ath/ath9k/hif_usb.c
drivers/net/wireless/ath/ath9k/hw.c
drivers/net/wireless/ath/ath9k/hw.h
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/rc.c
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/bcm4319/aiutils.c
drivers/net/wireless/bcm4319/bcmsdh.c
drivers/net/wireless/bcm4319/bcmsdh_linux.c
drivers/net/wireless/bcm4319/bcmsdh_sdmmc.c
drivers/net/wireless/bcm4319/bcmsdh_sdmmc_linux.c
drivers/net/wireless/bcm4319/bcmutils.c
drivers/net/wireless/bcm4319/dhd_common.c
drivers/net/wireless/bcm4319/dhd_proto.h
drivers/net/wireless/bcm4319/dhd_sdio.c
drivers/net/wireless/bcm4319/hndpmu.c
drivers/net/wireless/bcm4319/include/aidmp.h
drivers/net/wireless/bcm4319/include/bcmcdc.h
drivers/net/wireless/bcm4319/include/bcmdefs.h
drivers/net/wireless/bcm4319/include/bcmdevs.h
drivers/net/wireless/bcm4319/include/bcmendian.h
drivers/net/wireless/bcm4319/include/bcmpcispi.h
drivers/net/wireless/bcm4319/include/bcmperf.h
drivers/net/wireless/bcm4319/include/bcmsdbus.h
drivers/net/wireless/bcm4319/include/bcmsdh.h
drivers/net/wireless/bcm4319/include/bcmsdh_sdmmc.h
drivers/net/wireless/bcm4319/include/bcmsdpcm.h
drivers/net/wireless/bcm4319/include/bcmsdspi.h
drivers/net/wireless/bcm4319/include/bcmsdstd.h
drivers/net/wireless/bcm4319/include/bcmspi.h
drivers/net/wireless/bcm4319/include/bcmutils.h
drivers/net/wireless/bcm4319/include/bcmwifi.h
drivers/net/wireless/bcm4319/include/dhdioctl.h
drivers/net/wireless/bcm4319/include/epivers.h
drivers/net/wireless/bcm4319/include/hndpmu.h
drivers/net/wireless/bcm4319/include/hndrte_armtrap.h
drivers/net/wireless/bcm4319/include/hndrte_cons.h
drivers/net/wireless/bcm4319/include/hndsoc.h
drivers/net/wireless/bcm4319/include/linux_osl.h
drivers/net/wireless/bcm4319/include/linuxver.h
drivers/net/wireless/bcm4319/include/miniopt.h
drivers/net/wireless/bcm4319/include/msgtrace.h
drivers/net/wireless/bcm4319/include/osl.h
drivers/net/wireless/bcm4319/include/packed_section_end.h
drivers/net/wireless/bcm4319/include/packed_section_start.h
drivers/net/wireless/bcm4319/include/pcicfg.h
drivers/net/wireless/bcm4319/include/proto/802.11e.h
drivers/net/wireless/bcm4319/include/proto/802.1d.h
drivers/net/wireless/bcm4319/include/proto/bcmeth.h
drivers/net/wireless/bcm4319/include/proto/bcmevent.h
drivers/net/wireless/bcm4319/include/proto/bcmip.h
drivers/net/wireless/bcm4319/include/proto/eapol.h
drivers/net/wireless/bcm4319/include/proto/ethernet.h
drivers/net/wireless/bcm4319/include/proto/sdspi.h
drivers/net/wireless/bcm4319/include/proto/vlan.h
drivers/net/wireless/bcm4319/include/proto/wpa.h
drivers/net/wireless/bcm4319/include/sbchipc.h
drivers/net/wireless/bcm4319/include/sbconfig.h
drivers/net/wireless/bcm4319/include/sbhnddma.h
drivers/net/wireless/bcm4319/include/sbpcmcia.h
drivers/net/wireless/bcm4319/include/sbsdio.h
drivers/net/wireless/bcm4319/include/sbsdpcmdev.h
drivers/net/wireless/bcm4319/include/sbsocram.h
drivers/net/wireless/bcm4319/include/sdio.h
drivers/net/wireless/bcm4319/include/sdioh.h
drivers/net/wireless/bcm4319/include/sdiovar.h
drivers/net/wireless/bcm4319/include/siutils.h
drivers/net/wireless/bcm4319/include/trxhdr.h
drivers/net/wireless/bcm4319/include/typedefs.h
drivers/net/wireless/bcm4319/siutils.c
drivers/net/wireless/bcm4319/wl_iw.c
drivers/net/wireless/bcm4319/wl_iw.h
drivers/net/wireless/bcmdhd/Kconfig
drivers/net/wireless/bcmdhd/Makefile
drivers/net/wireless/bcmdhd/bcmevent.c
drivers/net/wireless/bcmdhd/dhd.h
drivers/net/wireless/bcmdhd/dhd_cdc.c
drivers/net/wireless/bcmdhd/dhd_linux.c
drivers/net/wireless/bcmdhd/dhd_wlfc.h
drivers/net/wireless/bcmdhd/include/Makefile
drivers/net/wireless/bcmdhd/include/htsf.h
drivers/net/wireless/bcmdhd/include/proto/802.11.h
drivers/net/wireless/bcmdhd/include/proto/802.11_bta.h
drivers/net/wireless/bcmdhd/include/proto/bt_amp_hci.h
drivers/net/wireless/bcmdhd/include/proto/p2p.h
drivers/net/wireless/bcmdhd/include/wlfc_proto.h
drivers/net/wireless/bcmdhd/include/wlioctl.h
drivers/net/wireless/bcmdhd/linux_osl.c
drivers/net/wireless/bcmdhd/wl_android.c
drivers/net/wireless/bcmdhd/wl_android.h
drivers/net/wireless/bcmdhd/wl_cfg80211.c
drivers/net/wireless/bcmdhd/wl_cfg80211.h
drivers/net/wireless/bcmdhd/wl_cfgp2p.c
drivers/net/wireless/bcmdhd/wl_cfgp2p.h
drivers/net/wireless/bcmdhd/wl_linux_mon.c
drivers/net/wireless/bcmdhd/wldev_common.c
drivers/net/wireless/bcmdhd/wldev_common.h
drivers/net/wireless/ipw2x00/ipw2200.c
drivers/net/wireless/iwlwifi/iwl-agn-lib.c
drivers/net/wireless/iwlwifi/iwl-agn-tx.c
drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-agn.h
drivers/net/wireless/iwlwifi/iwl-core.c
drivers/net/wireless/iwlwifi/iwl-hcmd.c
drivers/net/wireless/iwlwifi/iwl-rx.c
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/libertas/if_spi.c
drivers/net/wireless/p54/p54spi.c
drivers/net/wireless/rt2x00/rt2800lib.c
drivers/net/wireless/rt2x00/rt2800pci.c
drivers/net/wireless/rt2x00/rt2800usb.c
drivers/net/wireless/rt2x00/rt2x00.h
drivers/net/wireless/rt2x00/rt2x00dev.c
drivers/net/wireless/rt2x00/rt2x00mac.c
drivers/net/wireless/rt2x00/rt2x00queue.c
drivers/usb/serial/option.c

rk30 hdmi: lower ddc frequency to pass hdmi cts.

solve gsensor deadlock problem.

sched: Cleanup cpu_active madness

commit 5fbd036b552f633abb394a319f7c62a5c86a9cd7 upstream.

Stepan found:

CPU0 CPUn

_cpu_up()
  __cpu_up()

boostrap()
  notify_cpu_starting()
  set_cpu_online()
  while (!cpu_active())
    cpu_relax()

<PREEMPT-out>

smp_call_function(.wait=1)
  /* we find cpu_online() is true */
  arch_send_call_function_ipi_mask()

  /* wait-forever-more */

<PREEMPT-in>
  local_irq_enable()

  cpu_notify(CPU_ONLINE)
    sched_cpu_active()
      set_cpu_active()

Now the purpose of cpu_active is mostly with bringing down a cpu, where
we mark it !active to avoid the load-balancer from moving tasks to it
while we tear down the cpu. This is required because we only update the
sched_domain tree after we brought the cpu-down. And this is needed so
that some tasks can still run while we bring it down, we just don't want
new tasks to appear.

On cpu-up however the sched_domain tree doesn't yet include the new cpu,
so its invisible to the load-balancer, regardless of the active state.
So instead of setting the active state after we boot the new cpu (and
consequently having to wait for it before enabling interrupts) set the
cpu active before we set it online and avoid the whole mess.

rk30: cpufreq: prevent deadlock by disable call get_online_cpus

The deadlock happens when:
rk30_cpufreq_temp_limit_work_func:
 cpufreq_driver_target
  lock_policy_rwsem_write
  mutex_lock(&cpufreq_mutex)

cpufreq_interactive_up_task:
 mutex_lock(&cpufreq_mutex)
 mutex_lock(&cpu_hotplug.lock)

_cpu_down:
 mutex_lock(&cpu_hotplug.lock)
 lock_policy_rwsem_write

rk: fiq_debugger: better support cpu cmd, never switch when target cpu is offline

rk: add RK_CLOCK_PROC config, disable /proc/clocks by default

add arm-eabi-4.4.3 toolchain

i2c: 'move rk30_i2c_platform_data from mach-rk30 to plat-rk' and 'disable i2c4 select on rk2928'

rk: add RK_PL330_DMA config

add mt6229 for rk30

rk30:phone: the bug of charge_display

add mw100 for rk30

add mu509 for rk30

add twl60xx low battery detection function at rk30_phone_defconfig.

hcd nonper channel problem & suspend when no device connect

add charge display function at  rk30_phone_defconfig.

rk30:sdk:change load order order

camera:modify ov5640_for_td8801.c

rk30:phone:support pmic tps80032 vbat low detection,support pmic tps80032 early suspend

rk30:sdk: update power calculation method

del rga dump for bug fix

Revert "rk30:sdk: store clock request frequency and auto scale frequency when limit clock frequency"

This reverts commit f0a1404739d7e0e63e8e2745bf92af10faeb0fc4.

rk30:sdk: store clock request frequency and auto scale frequency when limit clock frequency

rk30: not gating the gpios clock

rk30:sdk: protect variable and function

rk30:sdk: get avs value under logic 1.1V

rk30:sdk add interface of avs function and interface to see dvfs tree(/sys/dvfs/dvfs_tree)

revise rga code err

rk: plat: entry-macro.S use GIC_CPU_BASE macro

add rga version

rk: move fiq.c from mach-rk30 to plat-rk

add GIC_DIST_BASE, GIC_CPU_BASE, IRQ_DEBUG_UART macro
rename rk30_fiq_init to rk_fiq_init

rk30:sdk: add lowpower check

rk30:sdk: add wakelock when charging

rk30:sdk: add GPU frequency limit between 133MHz to 400MHz

rk: plat: add io.h

DMA: rk29-pl330.c add new argument 'id' to pl330_request_channel() where it is invoked

rk: plat: add memory.h

DMA: dma-pl330.c add new argument 'id' to pl330_request_channel() where it is invoked

adc drivers: add comments

DMA :pl330.c  add new argument 'id' to pl330_request_channel()

rk: plat: add gpio.h

rk: move fiq.h from mach-rk30 to plat-rk

rk: move system.h from mach-rk30 to plat-rk

rk: move clkdev.h debug-macro.S entry-macro.S timex.h uncompress.h from mach-rk30 to plat-rk

rk30: cpufreq: support build with non-SMP config

camera: modify ov5640 driver for phone

Revert "fix spi driver's bug while dma recieving"

This reverts commit b01b358f83249ee24bc26232ee3afed5e5e6feec.

net: wireless: bcmdhd: Skip inaccurate wl_construct_reginfo() call

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

add broadcom OOB function resource,current is not used

rk30: timer: try fix asynchronous read timer, return value may undefined

rk30 : DMA: add move DMA microcode from DDR to SRAM

rk30: add retry after dvfs set voltage error, and check voltage value to make sure if it realy failed

rk30: record arm voltage value before dvfs start

camera rk30: rk_camera_querycap func has bug of quering orintation.

solve the problem we should push power button twice when device resume.

fix spi driver's bug while dma recieving

camera rk29: fix error when calculate crop left-top point coordinate, version update to v0.x.d

gpll support 300M

modify tdsc8800 bug.

rk30 hdmi:
1. Fix HDMI 480P video parameter setting error.
2. Print EDID data when debug is enabled.

rk30 phone: camera update ov5640_for_td8801.c

rk30 phone: camera config :change back camera from ov5640.c to ov5640_for_td8801.c

Linux 3.0.36

USB: fix gathering of interface associations

commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream.

TEAC's UD-H01 (and probably other devices) have a gap in the interface
number allocation of their descriptors:

  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          220
    bNumInterfaces          3
    [...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      [...]
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          1 Audio
      bFunctionSubClass       0
      bFunctionProtocol      32
      iFunction               4
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      [...]

Once a configuration is selected, usb_set_configuration() walks the
known interfaces of a given configuration and calls find_iad() on
each of them to set the interface association pointer the interface
is included in.

The problem here is that the loop variable is taken for the interface
number in the comparison logic that gathers the association. Which is
fine as long as the descriptors are sane.

In the case above, however, the logic gets out of sync and the
interface association fields of all interfaces beyond the interface
number gap are wrong.

Fix this by passing the interface's bInterfaceNumber to find_iad()
instead.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: bEN <ml_all@circa.be>
Reported-by: Ivan Perrone <ivanperrone@hotmail.com>
Tested-by: ivan perrone <ivanperrone@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: Enforce USB driver and USB serial driver match

commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream.

We need to make sure that the USB serial driver we find
matches the USB driver whose probe we are currently
executing. Otherwise we will end up with USB serial
devices bound to the correct serial driver but wrong
USB driver.

An example of such cross-probing, where the usbserial_generic
USB driver has found the sierra serial driver:

May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected
May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected
May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected

sysfs view of the same problem:

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/sierra
-rw-r--r-- 1 root root 4096 May 29 18:23 new_id
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/
total 0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/
total 0
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
-rw-r--r-- 1 root root 4096 May 29 18:33 new_id
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind

So we end up with a mismatch between the USB driver and the
USB serial driver.  The reason for the above is simple: The
USB driver probe will succeed if *any* registered serial
driver matches, and will use that serial driver for all
serial driver functions.

This makes ref counting go wrong. We count the USB driver
as used, but not the USB serial driver.  This may result
in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>:

[11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1
[11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
[11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
[11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0
[11812.264197] USB Serial deregistering driver FTDI USB Serial Device
[11812.264865] usbcore: deregistering interface driver ftdi_sio
[11812.282180] USB Serial deregistering driver pl2303
[11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[11812.283272] usbcore: deregistering interface driver pl2303
[11812.301056] USB Serial deregistering driver generic
[11812.301186] usbcore: deregistering interface driver usbserial_generic
[11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect
[11812.301823] BUG: unable to handle kernel paging request at f8e7438c
[11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.301871] *pde = 357ef067 *pte = 00000000
[11812.301957] Oops: 0000 [#1] PREEMPT SMP
[11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303]
[11812.302008]
[11812.302019] Pid: 1323, comm: modprobe Tainted: G        W    3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J
[11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1
[11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300
[11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58
[11812.302160]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0
[11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[11812.302189] DR6: ffff0ff0 DR7: 00000400
[11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000)
[11812.302209] Stack:
[11812.302216]  f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540
[11812.302325]  f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450
[11812.302372]  f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590
[11812.302419] Call Trace:
[11812.302439]  [<c133d2c1>] usb_unbind_interface+0x51/0x190
[11812.302456]  [<c12f0344>] __device_release_driver+0x64/0xb0
[11812.302469]  [<c12f0c67>] driver_detach+0x97/0xa0
[11812.302483]  [<c12f001c>] bus_remove_driver+0x6c/0xe0
[11812.302500]  [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140
[11812.302514]  [<c12f0ff9>] driver_unregister+0x49/0x80
[11812.302528]  [<c1457df6>] ? printk+0x1d/0x1f
[11812.302540]  [<c133c50d>] usb_deregister+0x5d/0xb0
[11812.302557]  [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial]
[11812.302575]  [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial]
[11812.302593]  [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial]
[11812.302611]  [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial]
[11812.302716]  [<c1080b48>] sys_delete_module+0x158/0x260
[11812.302730]  [<c110594e>] ? mntput+0x1e/0x30
[11812.302746]  [<c145c3c3>] ? sysenter_exit+0xf/0x18
[11812.302746]  [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170
[11812.302746]  [<c145c390>] sysenter_do_call+0x12/0x36
[11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f
[11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58
[11812.302746] CR2: 00000000f8e7438c

Fix by only evaluating serial drivers pointing back to the
USB driver we are currently probing.  This still allows two
or more drivers to match the same device, running their
serial driver probes to sort out which one to use.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modem

commit 19a3dd1575e954e8c004413bee3e12d3962f2525 upstream.

Add support for Sierra Wireless AirCard 320U modem

Signed-off-by: Tomas Cassidy <tomas.cassidy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-acm: fix devices not unthrottled on open

commit 6c4707f3f8c44ec18282e1c014c80e1c257042f9 upstream.

Currently CDC-ACM devices stay throttled when their TTY is closed while
throttled, stalling further communication attempts after the next open.

Unthrottling during open/activate got lost starting with kernel
3.0.0 and this patch reintroduces it.

Signed-off-by: Otto Meta <otto.patches@sister-shadow.de>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2

commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream.

This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers.  Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state.  Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.

The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep.  Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.

A similar patch has already been applied as commit
151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during
suspend on ASUS computers).  The patch supersedes that one and reverts
it.  There are two differences:

The old patch added the flag at the USB level; this patch
adds it at the PCI level.

The old patch applied to all chipsets with the same vendor,
subsystem vendor, and product IDs; this patch makes an
exception for a known-good system (based on DMI information).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapter

commit e00a54d772210d450e5c1a801534c3c8a448549f upstream.

Add support for RT Systems USB-RTS01 USB to Serial adapter:
http://www.rtsystemsinc.com/Photos/USBRTS01.html

Tested by controlling Icom IC-718 amateur radio transceiver via hamlib.

Signed-off-by: Evan McNabb <evan@mcnabbs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add Optris MS Pro usb id

commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream.

Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mct_u232: Fix incorrect TIOCMSET return

commit 1aa3c63cf0a79153ee13c8f82e4eb6c40b66a161 upstream.

The low level helper returns 1 on success. The ioctl should however return
0. As this is the only user of the helper return, make the helper return 0 or
an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: qcserial: Add Sierra Wireless device IDs

commit c41444ccfa33a1c20efa319e554cb531576e64a2 upstream.

Some additional IDs found in the BSD/GPL licensed out-of-tree
GobiSerial driver from Sierra Wireless.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: mos7840: Fix compilation of usb serial driver

commit b9c87663eead64c767e72a373ae6f8a94bead459 upstream.

The __devinitconst section can't be referenced
from usb_serial_device structure. Thus removed it as
it done in other mos* device drivers.

Error itself:
WARNING: drivers/usb/serial/mos7840.o(.data+0x8): Section mismatch in reference
from the variable moschip7840_4port_device to the variable
.devinit.rodata:id_table
The variable moschip7840_4port_device references
the variable __devinitconst id_table

[v2] no attach now

Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xHCI: Increase the timeout for controller save/restore state operation

commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream.

When system software decides to power down the xHC with the intent of
resuming operation at a later time, it will ask xHC to save the internal
state and restore it when resume to correctly recover from a power event.
Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore
State flag in the USBCMD register and wait for the Save/Restore State
Status flag in the USBSTS register to transition to '0'". However, it does
not define how long software should wait for the SSS/RSS bit to transition
to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller
to save/restore the state successfully. Increase the timeout to 10ms helps to
resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation"

Signed-off-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfsplus: fix overflow in sector calculations in hfsplus_submit_bio

commit a6dc8c04218eb752ff79cdc24a995cf51866caed upstream.

The variable io_size was unsigned int, which caused the wrong sector number
to be calculated after aligning it. This then caused mount to fail with big
volumes, as backup volume header information was searched from a
wrong sector.

Signed-off-by: Janne Kalliomäki <janne@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>