staging:csr: remove usage of CsrSnprintf and use scnprintf

This change tries to achieve the removal of the csr driver defined snprintf
and uses the kernel defined snprintf.

After this change i got following build warnings, which are solved in this patch

warnings generated:

drivers/staging/csr/io.c:929:13: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘u32’
drivers/staging/csr/io.c:929:13: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 5 has type ‘u32’
drivers/staging/csr/csr_wifi_hip_udi.c: In function ‘unifi_print_status’:
drivers/staging/csr/csr_wifi_hip_udi.c:78:27: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘u32’
drivers/staging/csr/csr_wifi_hip_udi.c:151:27: warning: format ‘%u’ expects type ‘unsigned int’, but argument 5 has type ‘long int’
drivers/staging/csr/csr_wifi_hip_udi.c:257:27: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘u32’
drivers/staging/csr/csr_wifi_hip_udi.c:257:27: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 5 has type ‘u32’
drivers/staging/csr/csr_wifi_hip_udi.c:261:27: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘u32’

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: replace printk calls in comedi core

Replace the printk() calls in the comedi core module with something more
suitable, such as dev_...() or pr_...().  Remove the ones that report a
failure to increment a module count (try_module_get() failure).  Change
the printk() call in the DPRINTK() macro to pr_debug().

TODO: Most of the DPRINTK() calls need to be replaced with something
else.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: abbreviate IS_ENABLED()

The IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA) and
IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) macro calls are a bit
long-winded.  Define a couple of macros DO_ISA and DO_PCI as
abbreviations for them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: check bus type before accessing LCR

The PCI-local bridge LCR registers are (assumed to be) present and used
iff the board is a PCI board (a PCI236).  Currently the code tests if
devpriv->lcr_iobase is valid before accessing the registers.  Instead,
check if the board is a PCI board and assume devpriv->lcr_iobase is
valid if so.  (Currently, no validity check is performed as the PCI
vendor and device ID ought to suffice, but simple checks could be added
when attaching the device.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: check bus type in detach routine

When detaching the device in pc236_detach() mirror the bus type checks
performed by pc236_attach().  The existing tests are safe but rely on
dev->iobase being 0 when comedi_to_pci_dev(dev) is NULL.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc236: add helper functions to check bus type

Add inline helper function is_isa_board(board) to check if the driver
supports ISA boards and this is an ISA board, and is_pci_board(board) to
check if the driver supports PCI boards and this is a PCI board.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc263: abbreviate IS_ENABLED()

The IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_ISA) and
IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_PCI) macro calls are a bit
long-winded.  Define a couple of macros DO_ISA and DO_PCI as
abbreviations for them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc263: check bus type in detach routine

When detaching the device in pc263_detach() mirror the bus type checks
performed by pc263_attach().  The existing tests are safe but rely on
dev->iobase being 0 when comedi_to_pci_dev(dev) is NULL.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pc263: add helper functions to check bus type

Add inline helper function is_isa_board(board) to check if the driver
supports ISA boards and this is an ISA board, and is_pci_board(board) to
check if the driver supports PCI boards and this is a PCI board.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: cleanup contec_do_insn_bits

Create local variables for the mask and bits values passed in
the data pointer to make this function a bit clearer.

Return the state of the output bits (s->state) in data[1] since
this is what comedilib is expecting.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an attach_pci callback function. Since the
driver does not require any external configuration options, disable
the legacy attach by making the attach simply return -ENOSYS. This
removes the need to walk to pci bus to find the pci_dev and the
need for the pci_dev_put in the detach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: remove unneeded boardinfo code

The boardinfo code is not needed by this driver. Only one board
type is supported.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: define register map for board

Only one board type is supported by this driver. Instead of
passing the register offsets for the digital in/out ports in
the boardinfo, define the register map and use that to access
the ports.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: remove unused fields in the boardinfo

The model, in_ports, out_ports, and out_boffs information in the
boardinfo is not used by the driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: remove function trace messages

The dev_dbg function trace messages in the contec_do_insn_bits
and contec_di_insn_bits functions are just noise. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: contec_pci_dio: remove thisboard macro

This macro relies on a local variable of a specific name. Remove the
macro and use the comedi_board() helper to get the thisboard pointer.

Move the 'dev->board_name = thisboard->name;' in contec_attach().
The contec_find_pci_dev() function modifies the dev->board_ptr.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: remove return in ProcessLineStatus and ProcessModemStatus

These are void functions and they dont need return at the end of the function

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: remove retval initialisation in qt_tiocmget and qt_tiocmset

in qt_tiocmset,

the retval gets assigned if we have a valid serial pointer in the critical section
(between mutex_lock and _unlock) of the code, no need to initialise this variable.

the same retval assignment follows in the qt_tiocmget function also, so remove the
initialisation here too.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: remove unneeded return in qt_throttle

this return is in the end of the qt_throttle function, so this return
not needed

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: remove unneeded return in qt_unthrottle

this return is at the end of the void function qt_unthrottle, which is
not needed, and also remove the new line below this.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: asus_oled add MODULE_VERSION

Moved version string from MODULE_DESCRIPTION to MODULE_VERSION

Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: asus_oled: Change printk calls to dev_xxx

- Use dev_err whenever a struct device * is present
- None of the printk calls had levels set, but looked like they should
  probably be dev_err

Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: replace macros with inline functions

Replace the IS_ISA_BOARD() and IS_PCI_BOARD() functionlike macros with
inline functions is_isa_board() and is_pci_board().  Also call
is_pci_board() in dio200_find_pci_board() instead of an explicit
comparison operator.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: make attach handler optional

Some low-level Comedi drivers no longer support manual configuration of
devices with the COMEDI_DEVCONFIG ioctl (used by the comedi_config
program).  For those drivers, the 'attach_pci' or 'attach_usb' handler
will be set in the struct comedi_driver to configure devices
automatically (via comedi_pci_auto_config() or
comedi_usb_auto_config()).  Their 'attach' handlers are redundant but
the the comedi core module currently requires it to be set.

Make the 'attach' handler optional and issue a warning if something
wants to call it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: remove unused DRV_NAME

This define is not used in the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: remove unneeded boardinfo code

The boardinfo code is not needed by this driver. Only one board
type is supported.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: move boardinfo values into subdevice setup

There is only one "boardtype" actually supported by this driver.
The second entry in the boardinfo is a dummy entry that would
result in an unusable device.

Remove the boardinfo fields and just use the open coded values
in the subdevice setup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: remove unused fields in the boardinfo

The *_bits information in the boardinfo is not used by the driver.
Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: cleanup the analog output range

The analog output channels on this board only support a single
range, 0-10V unipolar. This range is available as an exported
symbol from the comedi core and "range_unipolar10". Use that
instead of duplicating the range in this driver and remove
the information from the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an attach_pci callback function. Since the
driver does not require any external configuration options, disable
the legacy attach by making the attach simply return -ENOSYS. This
removes the need to walk the pci bus to find the pci_dev and the
need for the pci_dev_put() in the detach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dnya_pci10xx: remove thisboard and devpriv macros

These macros rely on local variables having a specific name. Replace
them with local variables where used. Use the comedi_board() helper
to get the thisboard pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omapdrm: Expose the OMAP Z-Order property through DRM

Added support for zorder changes through DRM plane properties

Signed-off-by: Andre Renaud <andre@bluewatersys.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: add rotation properties

Use tiled buffers for rotated/reflected scanout, with CRTC and plane
properties as the interface for userspace to configure rotation.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci7x3x: fix pointer-to-int-cast warning

This driver uses the void *private variable in the comedi_subdevice
to pass the offset needed to read/write the appropriate register to
get/set the channels for the subdevice.

The adl_pci7x3x_do_insn_bits() and adl_pci7x3x_di_insn_bits() functions
were retrieving this offset by casting the s->private value as an
unsigned int. On 64-bit builds this results in a warning:

warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

Fix these warnings by casting the void * to an unsigned long.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: variax.c: Eliminated remaining strict_stroul()s

Eliminated remaining calls to strict_stroul() and replaced them with
strict_kstrtou8().

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: add helper macros to check bus type

Add helper macro IS_ISA_BOARD(board) to check if the driver supports ISA
boards and this is an ISA board, and IS_PCI_BOARD(board) to check if the
driver supports PCI boards and this is a PCI board.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: check bus type in detach routine

When detaching the device in dio200_detach() mirror the bus type checks
performed by dio200_attach().  The existing tests are safe but rely on
dev->iobase being 0 when comedi_to_pci_dev(dev) is NULL.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: abbreviate IS_ENABLED()

The IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_ISA) and
IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) macro calls are a bit
long-winded.  Define a couple of macros DO_ISA and DO_PCI as
abbreviations for them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: fix bitwise vs logical bug

This is a static checker fix and not something I can test.  The intent
of the code here is to set some bit flags.  For a logical OR the ">> 1"
shift wouldn't make a difference.  So it should be using a bitwise OR.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging "vme" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zsmalloc: collapse internal .h into .c

The patch collapses in the internal zsmalloc_int.h into
the zsmalloc-main.c file.

This is done in preparation for the promotion to mm/ where
separate internal headers are discouraged.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging "usbip" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: i18n.c: Fix leak in msg_set()

If we end up returning -EINVAL from the function we will leak the
memory allocated to 'newstr' which has been allocated but not yet
assigned to anything.
Fix the leak by properly freeing the memory again before we return.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix typo in staging/rtl8192u

Correct spelling typo in staging/rtl8192u

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fix typo in staging/rtl8187se

Correct spelling typo and adjust comment line length.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix typo in staging/rtl8192e

Correct spelling typo in staging/rtl8192e.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Replace timeout values with USB_CTRL_G(S)ET_TIMEOUT.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000: Fix ft1000_control function timeout argument usage.

Function ft1000_control have input argument timeout which was not passed
to usb_control_msg instead hardcoded to LARGE_TIMEOUT.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: add page table mapping method

This patchset provides page mapping via the page table.
On some archs, most notably ARM, this method has been
demonstrated to be faster than copying.

The logic controlling the method selection (copy vs page table)
is controlled by the definition of USE_PGTABLE_MAPPING which
is/can be defined for any arch that performs better with page
table mapping.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: prevent mappping in interrupt context

Because we use per-cpu mapping areas shared among the
pools/users, we can't allow mapping in interrupt context
because it can corrupt another users mappings.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: s/firstpage/page in new copy map funcs

firstpage already has precedent and meaning the first page
of a zspage.  In the case of the copy mapping functions,
it is the first of a pair of pages needing to be mapped.

This patch just renames the firstpage argument to "page" to
avoid confusion.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: fix checkpatch warnings

Now checkpatch clean.

$ find drivers/staging/panel -name "*.[ch]"|xargs ./scripts/checkpatch.pl \
-f --terse --nosummary|cut -f3- -d":"|sort |uniq -c|sort -n

2  WARNING: Single statement macros should not use a do {} while (0) loop

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Reduce maximum receive buffer size to a more sensible value

The current value for the maximum receive buffer size is 30720, which is
too large. For long-running systems, memory fragmentation may make it
difficult to obtain the buffers of O(2) needed for aggregation. Buffers
of O(3) are even worse, particularly when not needed. The new size is set
to 9100, which will allow aggregation.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: nvec: fix coding style issues

This commit fixes coding style issues that includes
long lines. Based on the original patch submitted by
Adnan Ali <adnan.ali@codethink.co.uk>

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging rtl8192e: Declare MODULE_FIRMWARE usage

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Mike McCormack <mikem@ring3k.org>
Cc: wlanfae <wlanfae@realtek.com>
Cc: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: use %*phC to hexdump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: print small buffers with %*ph

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: use %*ph to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: ac100@lists.launchpad.net
Acked-by: Julian Andres Klode <jak@jak-linux.org>
Acked-By: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: print small buffers via %*ph

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:ccg: Fix missing brackets for sizeof (found by sparse).

Fix following:
WARNING: sizeof fsg should be sizeof(fsg)
+ memset(&fsg, 0, sizeof fsg);

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: fix reference counting in gdm_wimax_event_init

This patch fixes the commit "staging/gdm72xx: cleanup little at
gdm_wimax_event_rcv" (8df858ea76b76dde9a39d4edd9aaded983582cfe),
which mishandles the reference counting of wm_event.

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Bump version number

Bump version numbers to keep in sync with internal
version information.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: isoc latency for audio burst

Set audio latency. This fixes issue where audio clips heard during
link outage.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Return correct actual_length to userland

This fixes issue where wrong retrun value was received
by userland application after writing data to raw hid device.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: Insulate driver from HZ value

This patch fixes issue caused due to different HZ
value on system which do not have HZ=1000

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: buffer frame if urb not available.

For interrupt end point buffer frames, if urb is not available
& give back as soon as urb is received from usb core.

Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/crystalhd: unregister chardev when class_create fails in chd_dec_init_chdev

we missed a unregiser_chrdev if the class_create and subsequent function calls / checks fail

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/crystalhd: assign PTR_ERR at fail cases to rc in chd_dec_init_chdev

the rc assignment to PTR_ERR at fail cases of class_create and device_create are missed out,
return proper error rather than returning -ENODEV.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: pcm.c: Changed simple_strtoul to kstrtoint

Changed call to simple_strtoul to kstrtoint in pcm_set_impulse_volume(...)

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omapdrm: Fix DMM sparse warnings

Fix the following sparse warnings:

drivers/staging/omapdrm/omap_dmm_tiler.c:123:13:
   warning: symbol 'omap_dmm_irq_handler' was not declared.
   Should it be static?

drivers/staging/omapdrm/omap_dmm_tiler.c:370:24:
   warning: Using plain integer as NULL pointer

Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob.clark@linaro.org>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: remove reclaim_buffers callback

The reclaim_buffers callback has already been removed by Daniel Vetter
<daniel.vetter@ffwll.ch> with his patch "drm: kill reclaim_buffers callback"
(b0071efe82). As a result the kernel compilation fails with omapdrm support
and so the callback for reclaim_buffers is being removed from omapdrm.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Fix typo in vt6656

Correct spelling typo in staging/vt6656

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: print small buffers with %*ph

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: print small buffers with %*ph

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: don't leak 'param' in vt6656_hostap_ioctl() when returning -EOPNOTSUPP

Don't return -EOPNOTSUPP directly in switch case's since it'll leak
the memory allocated to 'param' when that variable goes out of scope
without having been assigned to anything.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/tidspbridge: use module_platform_driver

the code under _init and _exit does platform_driver_register and
platform_driver_unregister respectively only,

so its better to use the module_platform_driver than just replicating
the module_platform_driver's implementation

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: eliminate uuid_uuid_to_string

There is native specificator for snprintf to get UUID in human readable format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: logger: Finish documentation of two structs

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: logger.h: Complete documentation of logger_entry

Previously, there were simply comments after each part - Now, it is
completed properly according to "Kernel doc" Sorry in advance if I made
any mistakes.

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: Fix comment/license formatting

Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: use module_platform_driver

as the init and exit functions just do a platform_driver_register and
platform_driver_unregister, and nothing else, so its better to
use the module_platform_driver macro rather replicating its implementation

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Fix up version.h includes

Include version.h where actually needed, remove where unneeded.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: fix coding style problems in handle_bh_error

the following fixes:

* fix line over 80
* fix no space at start of line
* use tabs instead of spaces
* no need of opening & closing braces for single statement if block

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: remove the initialisation of interfaceTag and its comment in handle_bh_error

the interfaceTag is actually initialised in for loop of this function
and its not needed to initialise it before for loop.

and also remove the comment that is obvious about this variable.

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: fix coding style problems in uf_wait_for_thread_to_stop

the following fixes:

* fix no space at the start of line
* line over 80 characters
* use tabs instead of spaces at starting of every line

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: fix coding style problems in uf_stop_thread

The following warnings and errors were fixed:

* fix no space at the start of a line
* fix line over 80 characters
* use tabs instead of spaces

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: clean coding style in uf_start_thread

in bh.c the function uf_start_thread needed a coding style fixes.

The following fixes:

* fix no space at the start of line
* fix over 80 character lines
* fix no brace needed for single statement blocks (if..else or for and while)
* use tabs instead of 4 spaces at the start of every line

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: remove firmware pointer check before giving to release_firmware

we do a check of firmware pointer against the NULL value before we give
it to the release_firmware.

as release_firmware is actually having a check against NULL, its not needed
here.

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: coding style fixes at sdio_linux_remove_irq and at install_irq

the following coding style problems were fixed:

1. move function return type from top to the starting of the function
2. remove all the spaces at the start of a line and used tabs

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/csr: coding style fixes in CsrTimeGet

the following warnings were fixed:
1. removed all spaces before the start of a line and used tabs
2. removed the braces around the if as it encloses only a single statement

Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: use %*ph[C] to hexdump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: print mac address with %pM

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: use ioremap_nocache instead of ioremap

The CPU might write-combine and/or cache memory access.  Something that for
most modules is not desired.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove linked list of registered devices

The linked list of registered devices is not needed as the struct
tpci200_board is saved in private data field of the pci device.

Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: avoid kernel bug when uninstalling a device

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts_pstor: substitute rtsx_dump by print_hex_dump

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: substitute rts51x_dump by print_hex_dump

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: ssv_dnp: fix checkpatch.pl warning

Fix checkpatch.pl warning about printk issue by merging two printk
calls into one dev_info call.

Signed-off-by: Güngör Erseymen <gelurine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci6208: use the 'board_name' for the resource name

Use the 'dev->board_name' instead of the 'dev->driver->driver_name'
as the resource name used when requesing the pci regions in
comedi_pci_enable(). The board_name has a closer affinity to the
card.

Also, remove the dev_err() message when comedi_pci_enable() fails.
It's just noise and doesn't actually tell the real reason why the
call failed. It could have failed either the pci_enable_device()
or the pci_request_regions().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>