arm: dts: rk3288-android: rename card name

Change-Id: I62a9de19b115f96f0b55b1dad696816e623868d4
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ASoC: hdmi_analog: add snd_card's name parsing from DT node support

Change-Id: Ie0fcd8ccbac5686b53261cf37a82921e05875dee
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

arm: dts: rockchip: enable dfi and dmc nodes for rk3288 rk818 edp board

Change-Id: I13d7de4810cc5d101db751f32afeaa3815a4727b
Signed-off-by: Tang Yun ping <typ@rock-chips.com>

arm: dts: rockchip: rk3328: add gpu_power_model in gpu node

Indeed, the values of the model parameters are supplied by Rocky Hao.

Change-Id: I23edaa0ee104d07f79f5bf5bdbd393b4fb3c5120
Signed-off-by: chenzhen <chenzhen@rock-chips.com>

arm: dts: rockchip: rk322x: add gpu_power_model in gpu node

Indeed, the values of the model parameters are supplied by Rocky Hao.

Change-Id: Ie6ff535eab3a1fabcd69289a0c1f32c76603a391
Signed-off-by: chenzhen <chenzhen@rock-chips.com>

drm: rockchip: hdmi: check sink max_tmds_clock in mode_valid

If sink max TMDS clock < 340MHz, we think the mode pixel clock
greater than 340MHz should support YCbCr420, or it is a bad mode.

Change-Id: I9f53fa4f9875977ae0355b65d9ccd8a304558c5d
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

arm64: dts: rk3368-r88: enabled usb host

Change-Id: I02dbdeebb15221076a2e1c415e5e6e8bccb484b2
Signed-off-by: Huang zhibao <hzb@rock-chips.com>

arm: dts: rk3288: remove cpll from cru

Change-Id: Iad4df450078a805abbeca5c271a75f40f2fefa6c
Signed-off-by: xubilv <xbl@rock-chips.com>

arm: dts: rk3288: support mipi dsi uboot display for rk818 evb

Change-Id: Id1b225de0905df9fe7837614b11b523f4b202c74
Signed-off-by: xubilv <xbl@rock-chips.com>

clk: rockchip: 3288: dclk will change if cpll initialized

Change-Id: I698437b21c94684af0a7dfbe643794de62edc962
Signed-off-by: xubilv <xbl@rock-chips.com>

arm: dts: rk3288: add dfi and dmc device nodes

Add dfi and dmc nodes in the device tree for the ARM rk3288 SoC.
To support ddr frequency scaling function, we need enable dmc and
dfi nodes.

Change-Id: Ib796c08c694e74e0da3319d2797e95aecf3e7e73
Signed-off-by: Tang Yun ping <typ@rock-chips.com>

PM / devfreq: assign set_auto_self_refresh for rk3288

This makes ddr possible to enter auto self-refresh mode
when early suspend.

Change-Id: I0cd214bcb9c8e82aeea3f335a77be21feb356e2d
Signed-off-by: Tang Yun ping <typ@rock-chips.com>

drm/edid: Clear the old hdmi info before parsing display info

The current EDID might not support advanced HDMI 2.0 features.
Leaving old hdmi info in the drm_display_info will make display
work not okay, when switching display from HDMI 2.0 device to
HDMI 1.4 device.

Change-Id: Ifaf11a115580a93ec00160d54f0d453842d7b484
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

arm: dts: rk3288-android: enable built-in hdmi and rt5640 sound

This patch use one cpudai->multicodecs card for built-in hdmi and
external codec which share the same i2s controller.

Change-Id: Ib56d7f10b6739b1c26ec8946470b9f0cd7215979
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

arm: configs: rockchip: enable SND_ROCKCHIP_HDMI_ANALOG

This patch enable SND_ROCKCHIP_HDMI_ANALOG for built-in hdmi sound
and external codec which share the same i2s controller.

Change-Id: I3ac29ba12f75c938e015d2b77a3b749888c2e4c2
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

ARM: dts: rk3288: fix to timer0 for broadcast timer

Change-Id: I0dd9a367c2587391b17ab9bb3a4610abdee14816
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

arm64: dts: rk3368-r88: add hdmi sound card

Change-Id: I2a81102c7e110a2fe36ec8ba3622ebb63cc91066
Signed-off-by: xuhuicong <xhc@rock-chips.com>

arm: dts: rk3288: add iep node and enable it

Change-Id: Ie7fe0bbc91a5fedb0617d9b6c6056bdb4aed610d
Signed-off-by: buluess.li <buluess.li@rock-chips.com>

input: touchscreen: gsl3673: to solve the boot and resume slowly

when boot and resume,the fw should load/reload,this will take up
much time in the main thread,so here add a thread to load/reload
fw in order to void this situation.

Change-Id: Ic1a67fd662b0406ede08b0aeb944525fabc519e6
Signed-off-by: buluess.li <buluess.li@rock-chips.com>

arm: dts: rockchip: rk3288: update tsadc's working frequence

tsadc in rk3288 can not work well at 10k hz clock. at most time, tsadc
in rk3288 can work well, but it will wrongly report a very high
temperature (eg. 110 degree) occasionally.  we set 5k hz can
resolve this issue.

Change-Id: I06a4a1631baa5f65786a524e2430bb2386f52bdf
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>

Revert "FROMLIST: drm: edid: HDMI 2.0 HF-VSDB block parsing"

This reverts commit 6e9aa006c4ae10f95bba0121c26b06363efb3b96.

UPSTREAM code has support parsing HDMI.20 HF-VSDB.

Change-Id: Ia25ee6a92e9a2fee4b3356446c1198e938c5e74d
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

drm: bridge: dw-hdmi: use scdc struct and function defined in upstream

Change-Id: I32c81abd842d61559032668d609bf479daac2666
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

UPSTREAM: drm/edid: detect SCDC support in HF-VSDB

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.

Change-Id: I14d2a5585a528b7195170a4202be87199eb858c6
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from 62c58af32c935a98a1e8d8ceb39a3a47b36fbbcd)

arm: dts: rk3288-evb: set i2c4 clock frequency to 400khz

Change-Id: I849a99d147e9336ba81cd25c92594ffb1289cb53
Signed-off-by: buluess.li <buluess.li@rock-chips.com>

UPSTREAM: drm/edid: detect SCDC support in HF-VSDB

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
 Thierry:
 - Fix typos in commit message and make abbreviation consistent
   across the commit message.
 - Change structure object name from hdmi_info -> hdmi
 - Fix typos and abbreviations in description of structure drm_hdmi_info
   end the description with a full stop.
 - Create a structure drm_scdc, and keep all information related to SCDC
   register set (supported, read request supported) etc in it.

Ville:
 - Change rr -> read_request
 - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
   of HF-VSDB parsing can be kept in same function, in incremental
   patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.

Change-Id: I93cd26ee5c51c3714eb702e8a1bd1b335385f26e
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit afa1c763653e0fd68f2d1e3dca869c9453d8ef06)

UPSTREAM: drm/edid: check for HF-VSDB block

This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase

Change-Id: Ie787aa71b17a5aad6b30722872e9befe79803baa
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 50dd1bd1e2395a78e5adfad96487092e215483e0)

scripts/gcc-wrapper.py: ignore drm_edid.c:3506

Change-Id: I3363df9995e27dedb4b0b461e210f872b7ef83c8
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

drm: bridge: dw-hdmi: correct the judgment condition of curr_ctrl

The judgment condition of curr_ctrl is curr_ctrl->mpixelclock. It is
a hand mistake of commit <594a077e31e8b1ff0bd192e9af702fecaeea31ba>,
when patch(https://patchwork.kernel.org/patch/9603303) is merged.

Change-Id: I40b150e4f166aa4ca05c078f52347764bdd1fd01
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

arm: rockchip_defconfig: enable CONFIG_IEP

Change-Id: I2b37378eb04f2146c515e074ba4f6d83d6148a0e
Signed-off-by: buluess.li <buluess.li@rock-chips.com>

ASoC: rockchip: hdmi_analog: set sysclk for codec dai

Change-Id: Ia9eabcc482451c64897b6d9d09d484da77624cbb
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>

video: rockchip: iep: compatible for did not config CONFIG_FB_ROCKCHIP

if there not config CONFIG_FB_ROCKCHIP that will build error

Change-Id: Icaa837f3c0a539e98133b7cb9550700e8a46817f
Signed-off-by: buluess.li <buluess.li@rock-chips.com>

ARM: dts: rockchip: add power key support on gva sdk board.

Change-Id: I10046d4369fad752b76e3dc518aab2c714e37eb6
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

drm: bridge: dw-hdmi: correct the judgment condition of pll_config

The judgment condition of pll_config is phy_config->mpixelclock. It is
a hand mistake of commit <594a077e31e8b1ff0bd192e9af702fecaeea31ba>.

Change-Id: I7e312fd3b7982ca4fdf610e577776bc5a45c4bde
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>

arm64: dts: rk3328: enable the power domain for decoder

The decoder requests the power domain is idle status when
it is resetting. Without the power domain it won't work.

Change-Id: If3afdbefbe40bc7529f13c12444adddbb328a21b
Signed-off-by: Randy Li <randy.li@rock-chips.com>

arm64: dts: rk3368: add system-status-freq and auto-freq-en properties for dmc

Change-Id: I4e1190548ab9e4a6167de7a04541e1e2db69481f
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

drm: bridge/dw-hdmi: add platform_device_unregister when remove

Change-Id: I7fdc7046b0065329abddbe503c9acd576175670a
Signed-off-by: xuhuicong <xhc@rock-chips.com>

arm64: rockchip_defconfig: enable drm tve

Change-Id: Ic1fb7387191a16cb37f690ce300ff0814af51c9c
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

ARM64: dts: rk3328-evb: enable tve

tve is enabled by default.

Change-Id: I43f9103a0a8d3078031e5d32a1d99602fb0a96ed
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

ARM64: dts: rk3328: add tve display node

support rk3328 cvbs.Some display parameter can be configured,
such as saturation.For more information, please check
Documentation/devicetree/bindings/display/rockchip/rockchip_drm_tve.txt

Change-Id: Ifcc074a34910b58a26fc309fc601494562851025
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

arm64: dts: rk3399: remove 297MHz and add 300MHz for dmc

Only 200MHz, 300MHz, 400MHz, 528MHz, 600MHz, 666MHz, 732MHz and
800MHz are available at present.

Change-Id: I48ed7e6e6f636389fbc239b1cca201f5c5f19d7a
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

PM / devfreq: assign set_auto_self_refresh for rk3368

This makes it possible to enter ddr self-refresh mode
when early suspend.

Change-Id: Ib72f391af00674a3c3ab32bbbd4e4a857d3354e8
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

PM / devfreq: rockchip_dmc: change frequency according to system status

This registers a reboot notifier, it will change ddr frequency to a
specified value when reboot system.

This registers a fb notifier, it will change ddr frequency to a specified
value and enable ddr self-reflash mode when early suspend.

This adds a new sysfs node system_status, so that different system status
can change ddr frequency through the node.

Change-Id: Ib5d7d5bd8ee82c29f6f260a3d2ffcb829dde2003
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

soc: rockchip: introduce system status notifier

This makes dmc driver possible to register a system status notifier and
other drivers possible to call the notifier call-back easily, so that
the dmc driver can change frequency according to different system status.

Change-Id: I1a4fb4649366d75310d2e29f87775bb2d9ca3d67
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

ARM: dts: rk3229-gva-sdk: remove memory node in dts.

Use memory region passed from uboot.

Change-Id: I8bd1c320cd1824fab9f2bc39213e24aa2fbcbc7b
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

drm: bridge: dw-hdmi: add debugfs_remove_recursive when unbind

On RK3328, dw-hdmi driver is reloaded after bind and unbind
then it will use the first register debugfs address if no run
debugfs_remove_recursive, and cause system crash.

Change-Id: Iafa6b4059962b62c79157a9cf6c3e1d56df48f03
Signed-off-by: xuhuicong <xhc@rock-chips.com>

ARM: dts: rockchip: convert rk3288 device tree files to 64 bits

In order to be able to use more than 4GB of RAM when the LPAE is
activated, the dts must be converted in 64 bits.

Most of the changes by the following commands:
sed -e 's/0xff/0x0 0xff/g' -e 's/0x0 0xff[[:xdigit:]]\{6\}/& 0x0/g'
sed 's/reg = <0x0 0x80000000>/reg = <0x0 0x0 0x0 0x80000000>/'
sed 's/reg = <0 0x80000000>/reg = <0x0 0x0 0x0 0x80000000>/'
sed 's/reg = <0 0x8000000>/reg = <0x0 0x0 0x0 0x8000000>/'

Change-Id: Ic4711ae04abc03db9ee09f78223a955a66a85d60
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>

drm/rockchip: vop: correct vop register's version

Change-Id: Ic7a85e3107501ed652b79e41a7c849b7538f0f81
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

OP-TEE: remove macro SWITCH_CPU0_DEBUG

Now OP-TEE OS can run in muti-core state,
so don't need switch to cpu0 anymore.'

Change-Id: I4f61120250823d6e2e13e2edeee58c26a184b7d2
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>

arm64: dts: rk3368-r88: wifi work up

Change-Id: I3b110916ac835be300253133a1977c7fd44bf332
Signed-off-by: huweiguo <hwg@rock-chips.com>

drm: bridge: dw-hdmi: set hdcp1x_enable in the dts so uboot can visit

Change-Id: Ibaf91c5beac2355e5c270f1edb69a63795dbff6a
Signed-off-by: xuhuicong <xhc@rock-chips.com>

clk: rockchip: rk3228: add CLK_IGNORE_UNUSED flag for vio_h2p

Change-Id: Ieca7abf5d01f70db09aa0fcc77b838c106f4fc87
Signed-off-by: WeiYong Bi <bivvy.bi@rock-chips.com>

clk: rockchip: rk3228: fix some PLL_NUX_CLKs' gates

Some PLL_NUX_CLKs' gates is actually behind muxs according to latest TRM,
so move the gates to composite clocks and amend their parent clocks.

Change-Id: Ib6043caa61e9df0473f2d0bdc756850968bb2a55
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

clk: rockchip: rk3228: fix gpu gate-register

Fix a typo making the aclk_gpu and aclk_gpu_noc access a wrong register to
handle its gate.

Change-Id: Ie0bac8014363af7c0409b8a56eacf2e858818843
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

arm64: dts: rk3368-r88: gmac work up

Change-Id: I43ffe5abe8293232f026f4696b17b36024d392cd
Signed-off-by: huweiguo <hwg@rock-chips.com>

ARM: dts: rockchip: Reduce the time of phy reset for rk3288-evb

It is too long to reset the time with 1000ms, which
would make the system init and resume slowly, 50ms
is enough.

Change-Id: Ifba39f401d14e161dd3d49e1b20ae102569ebb58
Signed-off-by: David Wu <david.wu@rock-chips.com>

arm64: rockchip_linux_defconfig: enable drm tve

Change-Id: I1e3ddee6b8f0b1987604fff727d4e33ef35c7d5c
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

drm/rockchip: vop: support rk3328 linux drm cvbs

Change-Id: Ie412fb30794b0addb2a4a0844af65e8356ab98c0
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

drm/rockchip: support rk3328 linux drm cvbs

This adds support for Rockchip CVBS found on rk3328 Linux.
The CVBS driver is based on the DRM framework.
NTSC(720x480i60hz) and PAL(720x576i50hz) modes are supported.
it's worth noting that rk3328 CVBS dclk is base on hdmi clk,so hdmi
should be enabled.

Change-Id: I059808111bfa96724eb629b6fc37915a4852e234
Signed-off-by: algea.cao <algea.cao@rock-chips.com>

net: wireless: rockchip_wlan: add rtl8189fs support

update rtl8189fs wifi driver to version v4.3.24.8_22657.20170607

Change-Id: Ia8154d438b8d17eb334ccac0bd366f19d7b0f785
Signed-off-by: huweiguo <hwg@rock-chips.com>

Revert "usb: xhci-plat: check hcc_params after add hcd"

This reverts commit 4301c33db2829da207884f4c66bba798062db033.

Since we have merged upstream patch, so let's revert this patch.

Change-Id: I188629f566e50810bd633bff8cc63edda42efe28
Signed-off-by: William Wu <william.wu@rock-chips.com>

arm64: dts: rk3399-mid: add otg switch regulator node

Change-Id: I61cb0c65c3bec7750f6b58711e7271c42c72b8bf
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>

arm64: dts: rk3368-p9: add otg switch regulator node

Change-Id: Ia200739711b6cc88e605981c325124720b1dc105
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

power: rk818-charger: set otg5v by regulator framework

because rk818 regulator driver registers all regulators into
system without checking whether they are defined in dts, so we
have to control it by regulator framework. Otherwise,
psci_system_suspend_finish() will disable it after system wakeup.

Change-Id: Ia9d9c0b7a8cf42ccee071ac0416c1ef2f711df2f
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

power: rk818-charger: support set charge current by battery temperature

Change-Id: I10b71fae6400f3c0125cab7af1524c2091c8924a
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

arm64: dts: rk3368-r88: r88 board work up

Change-Id: I86b88bb57d6c61b6dfd898cc45bc927c57a6c6ec
Signed-off-by: Huang zhibao <hzb@rock-chips.com>

ARM: dts: rk3229-gva-sdk: let wifi/bt working properly

Change-Id: I548200c4e81b56cbfdaa78b86369cdb5880b1fba
Signed-off-by: Yankun Zheng <zyk@rock-chips.com>

arm: rockchip_defconfig: netfilter: add iptables for IPV6

Change-Id: I5c5709cc5335ce0ac5670df7fa0af41eab6e35dc
Signed-off-by: Xu Xuehui <xxh@rock-chips.com>

net: wireless: rockchip_wlan: fix bug for ap6335

1. fix when start softap, wifi driver crash
2. fix p2p mac addr not correct, this case p2p can not use

Change-Id: Ia9b5d7ac660ec9b954a682345c52778f7534229e
Signed-off-by: Xu Xuehui <xxh@rock-chips.com>

net: wireless: rockchip_wlan: update rtl8189es wifi driver to version v4.3.18.4_22798.20170620

Change-Id: I257bf2273e34ea9fcc5e1f4199abed892bc1c0d4
Signed-off-by: huweiguo <hwg@rock-chips.com>

FROMLIST: drm/rockchip: add fb_dmabuf_export support

Add support for fb_dmabuf_export call, which is executed when ioctl
FBIOGET_DMABUF is called.

Change-Id: I13b753ae25d043835b1f4ffc20b5e233171d1096
Signed-off-by: Guillaume Tucker <guillaume.tucker@arm.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(am from https://github.com/ARM-software/linux/commit/61062681c90f49e129c0602ebe755a12787fbd66)

FROMLIST: fb: add dma-buf support

Add support for the dma-buf exporter role to the frame buffer API. The
importer role isn't meaningful for frame buffer devices, as the frame
buffer device model doesn't allow using externally allocated memory.

taken from an RFC on the linaro-mm-sig mailing list:
http://lists.linaro.org/pipermail/linaro-mm-sig/2012-June/002167.html

Fixes by Mark Yao:
  add FBIOGET_DMABUF to compat_ioctl.

Change-Id: I39c9bbdd6b88c6d5ba7524abfc5b560dceb4633e
Signed-off-by: Guillaume Tucker <guillaume.tucker@arm.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
(am from https://patchwork.linuxtv.org/patch/12980)

drm/rockchip: protect loader clocks

Change-Id: Ie9217de35ea1dc11d99b6340fc9f6ecc27ba33c8
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

drivers: rk_nand: modify write permissions for proc files

modify "rknand" and "mtd" write permissions, read only.

Change-Id: Ib5b35059c5f075b1bade4400e1bf846222ae9a49
Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>

power: rk818-charger: fix input current 80ma define error

1. input current 800ma should be 80ma, it's safe to change,
   because 800ma was not used;
2. set lowest one as default value when decode charge parameter.

Change-Id: I1683ebff708a62db2711b40f8f449f07936245f4
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

power: rk818-battery: update ts1 current select

select 40uA when temperature lower than 0'C, otherwise 60uA.

Change-Id: Ib235441c3adb146b8d1746a435875c19b1d8624d
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

power: rk818-battery: fix battery charging state report error

RK818_VB_MON_REG register needs at least 100ms to be correct
status for checking whether charger is online or offline.
So We search power_supply_class to get usb and ac psy for
charging state.

Change-Id: Ic332c055100309481d0dcd6d4bf030cc8db77d2d
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

power: rk818-battery: add notify to broadcast battery temperature

Change-Id: I2ee392f1885e87b0398eaff5ab7d0a0c89527e93
Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>

ARM: dts: rk322x-android: enable uart1

Change-Id: I5218cb893854900bb6a4b50910078be0cc598475
Signed-off-by: Binyuan Lan <lby@rock-chips.com>

UPSTREAM: drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()

drm_edid_to_eld() is just mean to cook up the ELD for the audio driver,
so having it parse non-audio related stuff seems just wrong, and
potentially could lead to that information not being even filled out
if the function doesn't even get called. Let's move that stuff to the
place where we parse the color formats and whatnot from the CEA ext
block.

Change-Id: I8f881f192ed06f4e16ec5e3811690c1df62c7546
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-9-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 23ebf8b9eab9151c3cccca8dbf44a8d47357158d)

UPSTREAM: drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info

We have the drm_display_info for storing information about the sink, so
let's move dvi_dual and max_tmds_clock in there.

v2: Deal with superfluous code shuffling
    Document dvi_dual and max_tmds_clock too

Change-Id: I678b50021e8b9fb03554f15e2bc003037813d51a
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 2a272ca9b8f748aa50f5f2df391a4bf05fd9fd29)

UPSTREAM: drm/edid: Make max_tmds_clock kHz instead of MHz

We generally store clocks in kHz, so let's do that for the
HDMI max TMDS clock value as well. Less surpising.

v2: Deal with superfluous code shuffling

Change-Id: I27afd0604e5e7f1bfaa572c1c5b81ecfbcf0994e
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit ab5603c4d334224e3a884e62e7083ec69849fa7a)

UPSTREAM: drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID

It's not a good idea to leave stale cea_rev in the drm_display_info. The
current EDID might not even have a CEA ext block in which case we'd end
up leaving the stale value in place.

Change-Id: I57e2bd4a92ddcab8c8f345c5e7e251cfa1fbd231
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-8-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 011acce2859ad50b7a923cad4a726220b5f24455)

UPSTREAM: drm/edid: Reduce the number of times we parse the CEA extension block

Instead of parsing parts of the CEA extension block in two places
to determine supported color formats and whatnot, let's just
consolidate it to one function. This also makes it possible to neatly
flatten drm_assign_hdmi_deep_color_info().

Change-Id: I68bd125757e6e5c8f13db62e52c4da827c040809
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-7-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 1cea146a806ae1f34cb1b5e3206ff63a2bb90782)

UPSTREAM: drm/edid: Don't pass around drm_display_info needlessly

We already pass the connector to drm_add_display_info() and
drm_assign_hdmi_deep_color_info(), so passing the
connector->display_info also is pointless.

Change-Id: I6c2035b7d9dd942adeb4e3477ef8999aca4a74a4
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-6-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 1826750f5775fa17909d02755bc872dfcfc6685e)

UPSTREAM: drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID

Clear out old max_tmds_clock and dvi_dual information (possibly from a
previous EDID) before parsing the current EDID. Tne current EDID might
not even have these in its HDMI VSDB, which would mean that we'd leave
the old stale values in place.

Change-Id: Ia0acb9ca673f8bf9badfda1cf99899298bae464b
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-3-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 75d7e542bd3669a7ce41b713be8d3fd71e0ed2fa)

UPSTREAM: drm/edid: Clear old audio latency values before parsing the new EDID

Clear out stale audio latency information (potentially from a previous
EDID) before constructing the ELD from the EDID.

Change-Id: I1e770776f031864f597c5cd143c5fc120b313b7d
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-2-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 85c91580555ac610b266260bc7866c51bdc4d205)

UPSTREAM: drm/edid: CEA mode 64 1080p100 vsync pulse width incorrect

  In the CEA-861 specification VIC 64 specifies a vsync pulse of 5 and
a backporch of 36. Adjust vsync pulse width to match specification.

Change-Id: I8a02c2c754644e911eff74c4a179a6825398f2d7
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1471282288-30909-1-git-send-email-clinton.a.taylor@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 8f0e4907a8e7545850ae093a0286833f3949e4cb)

UPSTREAM: drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)

The tiled 5K Dell monitor appears to be hiding it's tiled mode
inside the displayid timings block, this patch parses this
blocks and adds the modes to the modelist.

v1.1: add missing __packed.

Change-Id: Ide9eb60dd88614669ea5070c9135a880819c71f0
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit a39ed680bddb1ead592e22ed812c7e47286bfc03)

UPSTREAM: drm/edid: move displayid validation to it's own function.

We need to use this for validating modeline additions.

Change-Id: Idda40c52ff9372433e8bf81e1df5af7b59ce9b4c
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit c97291774c1b867b56c3d439ddaec9a965cf559e)

UPSTREAM: drm/displayid: Iterate over all DisplayID blocks

This will iterate over all DisplayID blocks found in the buffer.
Previously only the first block was parsed.

https://bugs.freedesktop.org/show_bug.cgi?id=95207

Change-Id: I952ea2442e8b7c31d8ca882cff8211f008cdd073
Signed-off-by: Tomas Bzatek <tomas@bzatek.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 3a4a2ea39f86c581054794c0a727597745f1084b)

UPSTREAM: drm/edid: move displayid tiled block parsing into separate function.

This just makes the code easier to follow.

Change-Id: Ic3ca12dd72c44fccfa16503822611ab4fd6b46ef
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 5e546cd5b3bc76824069ffa98c52a5f48cf91aba)

UPSTREAM: drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor

The EDID 1.4 specification section 3.10.3.9 defines an Established Timings III
descriptor (tag #F7h). The parsing of this descriptor by drm_est3_modes() is
off by one byte: the offset of the first timing bitmap is 6, not 5.

Change-Id: Ic24532d54245e035feb474309a609d7efb330658
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160328002258.E75DF6E35D@gabe.freedesktop.org
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit f3a32d74ef733e1ed1a0b804c17ec27081e0ff37)

UPSTREAM: drm/edid: Fix EDID Established Timings I and II

Three of the VESA DMT timings in edid_est_modes[] are slightly off.
1. 640x480@72Hz vsync_end should be 492, not 491.
2. 640x480@60Hz clock should be 25175, not 25200.
3. 1024x768@75Hz clock should be 78750, not 78800.
This patch corrects those timings per the VESA DMT specification, and
thus brings them into line with the identical timings in drm_dmt_modes[].

Change-Id: I351bc886ef2fb120ed62caaff9d0fff6b1868e4f
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160402100817.B60776E23A@gabe.freedesktop.org
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 87707cfdc387681dc702f00dfcffc26ca0bc5f71)

UPSTREAM: drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".

According to E-EDID spec 1.3, table 3.9, a digital video sink with the
"DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x
TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned".

For such displays, the DFP spec 1.0, section 3.10 "EDID support" says:

"If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.)
 without extensions, the host will make the following assumptions:

 1. 24-bit MSB-aligned RGB TFT
 2. DE polarity is active high
 3. H and V syncs are active high
 4. Established CRT timings will be used
 5. Dithering will not be enabled on the host"

So if we don't know the bit depth of the display from additional
colorimetry info we should assume 8 bpc / 24 bpp by default.

This patch adds info->bpc = 8 assignement for that case.

Change-Id: Ie7603f8bf19eeeb1cd1988b6a245ead5d2e52763
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 210a021dab639694600450c14b877bf3e3240adc)

UPSTREAM: drm/edid: respect connector force for drm_get_edid ddc probe

Skip DDC probe for forced connector status. Don't try to read the EDID
if the connector is forced off. Skipping probe for forced on connectors
will make more sense when drm_do_get_edid() will handle override and
firmware EDIDs.

Change-Id: I43c16b3bfd85520536445265ee693765538e4800
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-4-git-send-email-jani.nikula@intel.com
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
(cherry picked from commit 15f080f08d48af9388142e45a247c8410736178b)

ARM: dts: rk3229-gva-sdk: add new dts for google voice assistant sdk.

Change-Id: Ib1fedf6a86dff770f59e1a9313356d65c39835a4
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

ARM: rockchip_defconfig: enable CONFIG_RK_NAND support.

Change-Id: If44d8809787e065cddfcbbd207a2b3ba3b97085d
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

ARM: dts: rk322x: add nandc support

Change-Id: I7a95fc186cd49fcf1c835ee0cd65eb2244caaa32
Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

ARM: dts: rk3229-echo-v10: let wifi/bt working properly

Change-Id: I943f77203f4a568921a602cd06b0ab096108f553
Signed-off-by: Binyuan Lan <lby@rock-chips.com>

ARM: dts: rk322x: add another GPIO sets for UART1

Change-Id: Ibb32b7c9fb59f9adad4d4645967aa9f1c5032f5c
Signed-off-by: Binyuan Lan <lby@rock-chips.com>