Olof Johansson [Thu, 2 Jan 2014 18:57:05 +0000 (10:57 -0800)]
Merge tag 'renesas-sh-sci3-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Third Round of Renesas SH SCI Updates for v3.14
* Add Device Tree Support
* Remove platform data mapbase and irqs fields
* Remove platform data scbrr_algo_id field
* tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Add OF support
serial: sh-sci: Add device tree bindings documentation
serial: sh-sci: Remove platform data mapbase and irqs fields
serial: sh-sci: Remove platform data scbrr_algo_id field
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 18:54:34 +0000 (10:54 -0800)]
Merge tag 'renesas-sh-soc-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/drivers
Renesas SH based SoC Updates for v3.14
* Global
- Don't set plat_sci_port scbrr_algo_id field
- Declare SCIF register base and IRQ as resources
* sh772[34] SoCs
- Set serial port sampling rate to 8 for SCIFA ports
(These are merged through arm-soc due to dependencies with the SCI platform data
rework done for shmobile)
* tag 'renesas-sh-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
sh: Don't set plat_sci_port scbrr_algo_id field
sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports
sh: Declare SCIF register base and IRQ as resources
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 2 Jan 2014 18:54:20 +0000 (10:54 -0800)]
Merge branch 'renesas/drivers-sci2' into next/drivers
* renesas/drivers-sci2:
serial: sh-sci: Rework baud rate calculation
serial: sh-sci: Compute overrun_bit without using baud rate algo
serial: sh-sci: Remove unused GPIO request code
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
serial: sh-sci: Support resources passed through platform resources
serial: sh-sci: Don't check IRQ in verify port operation
serial: sh-sci: Set the UPF_FIXED_PORT flag
serial: sh-sci: Remove duplicate interrupt check in verify port op
serial: sh-sci: Simplify baud rate calculation algorithms
serial: sh-sci: Remove baud rate calculation algorithm 5
serial: sh-sci: Sort headers alphabetically
serial: sh-sci: Convert to clk_prepare/unprepare
serial: sh-sci: Don't enable/disable port from within break timer
serial: sh-sci: Fix warnings due to improper casts and printk formats
Olof Johansson [Sun, 29 Dec 2013 21:26:13 +0000 (13:26 -0800)]
Merge tag 'renesas-irqc-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Renesas ARM based SoC IRQC Driver Updates for v3.14
* Simplify irq_set_type() method
* Enable mask on suspend
* Use lazy disable
* tag 'renesas-irqc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
irq-renesas-irqc: simplify irq_set_type() method
irqchip: renesas-irqc: Enable mask on suspend
irqchip: renesas-irqc: Use lazy disable
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 27 Dec 2013 21:24:15 +0000 (13:24 -0800)]
Merge tag 'sunxi-drivers-for-3.14' of https://github.com/mripard/linux into next/drivers
From Maxime Ripard:
Allwinner SoC additions for 3.14
Two drivers are merged through for 3.14:
- The A10/A20 RTC driver
- The A31 reset controller IP
* tag 'sunxi-drivers-for-3.14' of https://github.com/mripard/linux:
ARM: sun4i/sun7i: RTC driver
ARM: sun4i/sun7i: DT documentation for RTC driver
reset: Add Allwinner SoCs Reset Controller Driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 26 Dec 2013 19:00:13 +0000 (11:00 -0800)]
Merge tag 'tegra-for-3.14-trusted-foundations' of git://git./linux/kernel/git/tegra/linux into next/drivers
From Stephen Warren:
ARM: tegra: Trusted Foundations firmware support
Add support for the Trusted Foundations secure-mode firmware, as found
on NVIDIA SHIELD. This allows Linux to run in non-secure mode on this
board; all previous Tegra support has assumed the kernel is running in
secure mode.
(The base TF support has been discussed back and forth a lot; for now
the most logical place for it seems to be under arch/arm, so we're adding
it here. We can move it out to a common location in the future if needed).
* tag 'tegra-for-3.14-trusted-foundations' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: support Trusted Foundations by default
ARM: tegra: set CPU reset handler using firmware
ARM: tegra: split setting of CPU reset handler
ARM: tegra: add support for Trusted Foundations
of: add Trusted Foundations bindings documentation
of: add vendor prefix for Trusted Logic Mobility
ARM: add basic support for Trusted Foundations
Signed-off-by: Olof Johansson <olof@lixom.net>
Bastian Hecht [Fri, 6 Dec 2013 09:59:54 +0000 (10:59 +0100)]
serial: sh-sci: Add OF support
Extend the driver to with support for SCIx device tree bindings. A
minimal set of features is supported, additional properties can be added
later should the need to describe more device features arise.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:53 +0000 (10:59 +0100)]
serial: sh-sci: Add device tree bindings documentation
Document the device tree bindings for the sci serial port devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:52 +0000 (10:59 +0100)]
serial: sh-sci: Remove platform data mapbase and irqs fields
The fields are not used anymore by board files, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:51 +0000 (10:59 +0100)]
serial: sh-sci: Remove platform data scbrr_algo_id field
The field isn't set by any board, remote it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 24 Dec 2013 12:50:13 +0000 (21:50 +0900)]
Merge branch 'sh-soc' into sh-sci2-base
Laurent Pinchart [Fri, 6 Dec 2013 09:59:50 +0000 (10:59 +0100)]
sh: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:49 +0000 (10:59 +0100)]
sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports
SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the
value specified in the datasheet. This is currently handled by a custom
baud rate calculation algorithm. The algorithm ID will be removed from
platform data, set the sampling rate directly instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:48 +0000 (10:59 +0100)]
sh: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Wolfram Sang [Wed, 18 Dec 2013 21:31:58 +0000 (22:31 +0100)]
arm: shmobile: r7s72100: add i2c clocks
Tested with RIIC2 on a genmai board. Others untested but hopefully
trivial enough to be added.
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:47 +0000 (10:59 +0100)]
ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:45 +0000 (10:59 +0100)]
ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:46 +0000 (10:59 +0100)]
ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:43 +0000 (10:59 +0100)]
ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:42 +0000 (10:59 +0100)]
ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:44 +0000 (10:59 +0100)]
ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:41 +0000 (10:59 +0100)]
ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:40 +0000 (10:59 +0100)]
ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 1 Nov 2013 00:44:07 +0000 (01:44 +0100)]
ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:38 +0000 (10:59 +0100)]
ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:35 +0000 (10:59 +0100)]
ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:39 +0000 (10:59 +0100)]
ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:36 +0000 (10:59 +0100)]
ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:34 +0000 (10:59 +0100)]
ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:33 +0000 (10:59 +0100)]
ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:32 +0000 (10:59 +0100)]
ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:31 +0000 (10:59 +0100)]
ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:30 +0000 (10:59 +0100)]
ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Sun, 3 Nov 2013 12:50:31 +0000 (13:50 +0100)]
ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:29 +0000 (10:59 +0100)]
ARM: shmobile: r8a7791: Don't define SCIF platform data in an array
The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:27 +0000 (10:59 +0100)]
ARM: shmobile: r8a7778: Don't define SCIF platform data in an array
The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:25 +0000 (10:59 +0100)]
ARM: shmobile: r7s72100: Don't define SCIF platform data in an array
The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:26 +0000 (10:59 +0100)]
ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array
The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:24 +0000 (10:59 +0100)]
ARM: shmobile: r8a7779: Use macros to declare SCIF devices
Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:23 +0000 (10:59 +0100)]
ARM: shmobile: r8a7740: Use macros to declare SCIF devices
Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:22 +0000 (10:59 +0100)]
ARM: shmobile: sh73a0: Use macros to declare SCIF devices
Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:21 +0000 (10:59 +0100)]
ARM: shmobile: sh7372: Use macros to declare SCIF devices
Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 20 Dec 2013 02:09:34 +0000 (18:09 -0800)]
ARM: shmobile: r8a7778: add sound SCU clock support
This is needed to use SRC (= Sampling Rate Converter)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 24 Dec 2013 12:08:27 +0000 (21:08 +0900)]
Merge branch 'sh-sci' into soc3-base
Laurent Pinchart [Fri, 6 Dec 2013 09:59:20 +0000 (10:59 +0100)]
serial: sh-sci: Rework baud rate calculation
Computing the baud rate register value requires knowledge of the
hardware sampling rate. This information is currently encoded in a baud
rate calculation algorithm ID passed through platform data. However, it
can be derived from the port type directly in most cases.
Compute the sampling rate internally in the driver if the baud rate
calculation algorithm ID isn't specified, and allow platforms to
override the sampling rate through platform data in special cases (this
is only required for SCIFA ports on sh7723 and sh7724, the reason needs
to be investigated).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:19 +0000 (10:59 +0100)]
serial: sh-sci: Compute overrun_bit without using baud rate algo
The overrun bit index is a property of the hardware. It's currently
computed based on a different and unrelated hardware property, the baud
rate calculation algorithm. Compute it using hardware identification
information only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:18 +0000 (10:59 +0100)]
serial: sh-sci: Remove unused GPIO request code
The driver requests at initialization time GPIOs passed through platform
data. No platform makes use of this feature, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:17 +0000 (10:59 +0100)]
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
None of the fields is ever set by board code, and both of them are set
in the driver at probe time. Move them out of struct plat_sci_port to
struct sci_port.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:16 +0000 (10:59 +0100)]
serial: sh-sci: Support resources passed through platform resources
Memory and IRQ resources are currently passed to the driver through
platform data. Support passing them through the standard platform
resources mechanism instead. This deprecates platform data resources.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:15 +0000 (10:59 +0100)]
serial: sh-sci: Don't check IRQ in verify port operation
The IRQ number can't be modified by the user as the port is fixed.
There's no need to check the new IRQ number as it will be ignored by the
core.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:14 +0000 (10:59 +0100)]
serial: sh-sci: Set the UPF_FIXED_PORT flag
The base address, IRQ and baud rate generator parent clock rate can't be
changed by userspace. Mark the port as fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:13 +0000 (10:59 +0100)]
serial: sh-sci: Remove duplicate interrupt check in verify port op
The driver checks if the interrupt number is greater than nr_irqs and
returns an error in that case. The same check is already performed by
the caller, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:12 +0000 (10:59 +0100)]
serial: sh-sci: Simplify baud rate calculation algorithms
Rewrite the baud rate register value calculations in easier to read
forms. The computed value isn't modified.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:11 +0000 (10:59 +0100)]
serial: sh-sci: Remove baud rate calculation algorithm 5
The algorithm isn't used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Fri, 6 Dec 2013 09:59:10 +0000 (10:59 +0100)]
serial: sh-sci: Sort headers alphabetically
This helps locating duplicates.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Sat, 14 Dec 2013 00:09:31 +0000 (03:09 +0300)]
irq-renesas-irqc: simplify irq_set_type() method
Value 0 of the sense selection field of CONFIG_n register means "disable event
detection" and serves in irqc_sense[] for marking the invalid values of the IRQ
type (by just omitting initializers). There is no need for INTC_IRQ_SENSE_VALID
and hence INTC_IRQ_SENSE() as all field values matching to the valid IRQ types
are non-zero anyway.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Sun, 22 Dec 2013 22:08:08 +0000 (14:08 -0800)]
Merge tag 'samsung-irq' of git://git./linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim:
Samsung irq update for v3.14
- use linear irq domain for exynos-combiner
* tag 'samsung-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
irqchip: exynos-combiner: remove hard-coded irq_base value
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 22 Dec 2013 19:42:50 +0000 (11:42 -0800)]
Merge tag 'at91-drivers' of git://github.com/at91linux/linux-at91 into next/drivers
From Nicolas Ferre:
AT91 crypto drivers DT support:
- add DT to sha/des/aes existing drivers
- add DMA DT
- all documentation added to crypto/atmel-crypto.txt file
* tag 'at91-drivers' of git://github.com/at91linux/linux-at91:
crypto: atmel-sha - add sha information to the log
crypto: atmel-sha - add support for Device Tree
crypto: atmel-tdes - add support for Device Tree
crypto: atmel-aes - add support for Device Tree
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 22 Dec 2013 19:42:30 +0000 (11:42 -0800)]
Merge branch 'at91/dt' into next/drivers
Merging at91/dt as a prereq for the at91/drivers code.
* at91/dt: (43 commits)
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
ARM: at91: dt: at91rm9200ek: add emac and nor flash support
ARM: at91: add uart aliases to sama5d3 dtsi
ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT
ARM: at91: Animeo IP: fix mtd partition table
ARM: at91: at91sam9g45: add i2c pinctrl
ARM: at91: at91sam9g45: set default mmc pinctrl-names
ARM: at91: sama5d3: enable qt1070 as a wakeup source
ARM: at91: add support for Cosino board series by HCE Engineering
ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes
ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix
ARM: at91/dt/trivial: use macro for AES irq type
ARM: at91: sam9263ek: add dt lcd support
ARM: at91: at9sam9m10g45ek: add dt lcd support
ARM: at91: sam9263: add fb dt support
ARM: at91: sam9g45: add fb dt support
ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation
ARM: at91/dt: binding: add precision to AIC documentation
ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition
ARM: at91/dt: add ethernet phy to at91rm9200ek board
...
Carlo Caione [Sat, 16 Nov 2013 17:33:54 +0000 (18:33 +0100)]
ARM: sun4i/sun7i: RTC driver
This patch introduces the driver for the RTC in the Allwinner A10 and
A20 SoCs.
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Carlo Caione [Sat, 16 Nov 2013 17:33:53 +0000 (18:33 +0100)]
ARM: sun4i/sun7i: DT documentation for RTC driver
Add DT documentation for SUNXI RTC driver
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Kevin Hilman [Fri, 20 Dec 2013 19:23:08 +0000 (11:23 -0800)]
Merge tag 'renesas-usb-r8a66597-hcd-for-v3.14' of git://git./linux/kernel/git/horms/renesas into next/drivers
From Simon Horman:
Renesas USB r8a66597 HCD update for v3.14
Convert to clk_prepare/unprepare
* tag 'renesas-usb-r8a66597-hcd-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
usb: r8a66597-hcd: Convert to clk_prepare/unprepare
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Wolfram Sang [Wed, 18 Dec 2013 21:48:37 +0000 (22:48 +0100)]
arm: shmobile: clks: remove duplicated clock from r7s72100
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Thu, 12 Dec 2013 12:35:43 +0000 (21:35 +0900)]
ARM: shmobile: koelsch: Conditionally select MICREL_PHY
The koelsch board uses has an SH ethernet controller which uses a Micrel
phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the
Micrel-specific phy driver rather than relying on the generic phy driver.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 11 Dec 2013 14:13:51 +0000 (15:13 +0100)]
ARM: shmobile: rcar-gen2: Initialize CCF before clock sources
When CONFIG_COMMON_CLOCK is enabled, call rcar_gen2_clocks_init() in the
timer init function to initialize the common clock framework before
initializing the clock sources. This will take care of clock
initialization when the r8a779[01] boards will be switched to
multiplatform kernels.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 11 Dec 2013 14:05:13 +0000 (15:05 +0100)]
ARM: shmobile: r8a7791: Add clock index macros for DT sources
Add macros usable by device tree sources to reference r8a7791 clocks by
index.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Wed, 11 Dec 2013 14:05:12 +0000 (15:05 +0100)]
ARM: shmobile: r8a7790: Add clock index macros for DT sources
Add macros usable by device tree sources to reference r8a7790 clocks by
index.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ben Dooks [Thu, 12 Dec 2013 18:14:21 +0000 (18:14 +0000)]
ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
The PCI sub-system is not enabled by default on ARM and on certain
Renesas devices the build does not select it. This means that there
are configurations that do not allow the AHB-PCI bridge used for the
USB sub-systems to be built.
For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the
PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config
where there may be many Reneasas devices selected.
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 28 Nov 2013 17:11:46 +0000 (18:11 +0100)]
serial: sh-sci: Convert to clk_prepare/unprepare
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Laurent Pinchart [Thu, 28 Nov 2013 17:11:45 +0000 (18:11 +0100)]
serial: sh-sci: Don't enable/disable port from within break timer
The break timer accesses hardware registers and thus requires the port
to be enabled. It currently ensures this by enabling the port at the
beginning of the timer handler, and disabling it at the end. However,
the enable/disable operations call the runtime PM sync functions, which
are not allowed in atomic context. The current situation is thus broken.
This change relies on non-atomic code to enable/disable the port. The
break timer will only be started from the IRQ handler, which already
runs with the port enabled. We just need to ensure that the port won't
be disabled with the timer running, and that's easily done by just
cancelling the timer in the port disable function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:52 +0000 (15:30 +0900)]
ARM: tegra: support Trusted Foundations by default
Support for Trusted Foundations is light and allows the kernel to run on
a wider range of devices, so enable it by default.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:51 +0000 (15:30 +0900)]
ARM: tegra: set CPU reset handler using firmware
Use a firmware operation to set the CPU reset handler and only resort to
doing it ourselves if there is none defined.
This supports the booting of secondary CPUs on devices using a TrustZone
secure monitor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:50 +0000 (15:30 +0900)]
ARM: tegra: split setting of CPU reset handler
Not all Tegra devices can set the CPU reset handler in the same way.
In particular, devices using a TrustZone secure monitor cannot set it
up directly and need to ask the firmware to do it.
This patch separates the act of setting the reset handler from its
preparation, so the former can be implemented in a different way.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:49 +0000 (15:30 +0900)]
ARM: tegra: add support for Trusted Foundations
Register the firmware operations for Trusted Foundations if the device
tree indicates it is active on the device.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:48 +0000 (15:30 +0900)]
of: add Trusted Foundations bindings documentation
Add the Device Tree bindings documentation for the Trusted Foundation
secure monitor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:47 +0000 (15:30 +0900)]
of: add vendor prefix for Trusted Logic Mobility
Add the "tlm" prefix for Trusted Logic Mobility.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Alexandre Courbot [Sun, 24 Nov 2013 06:30:46 +0000 (15:30 +0900)]
ARM: add basic support for Trusted Foundations
Trusted Foundations is a TrustZone-based secure monitor for ARM that
can be invoked using the same SMC-based API on supported platforms.
This patch adds initial basic support for Trusted Foundations using
the ARM firmware API. Current features are limited to the ability to
boot secondary processors.
Note: The API followed by Trusted Foundations does *not* follow the SMC
calling conventions. It has nothing to do with PSCI neither and is only
relevant to devices that use Trusted Foundations (like most Tegra-based
retail devices).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Nicolas Ferre [Tue, 15 Oct 2013 14:37:44 +0000 (16:37 +0200)]
crypto: atmel-sha - add sha information to the log
Depending on peripheral capabilities, print SHA information at the end
of the probe function.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Ferre [Tue, 15 Oct 2013 13:36:34 +0000 (15:36 +0200)]
crypto: atmel-sha - add support for Device Tree
Add support for Device Tree and use of the DMA DT API to
get the channels if needed.
Documentation is added for these DT nodes.
Initial code by: Nicolas Royer and Eukrea.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Ferre [Tue, 15 Oct 2013 10:14:58 +0000 (12:14 +0200)]
crypto: atmel-tdes - add support for Device Tree
Add support for Device Tree and use of the DMA DT API to
get the channels if needed.
Documentation is added for these DT nodes.
Initial code by: Nicolas Royer and Eukrea.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Nicolas Ferre [Mon, 14 Oct 2013 15:52:38 +0000 (17:52 +0200)]
crypto: atmel-aes - add support for Device Tree
Add support for Device Tree and use of the DMA DT API to
get the needed channels.
Documentation is added for these DT nodes.
Initial code by: Nicolas Royer and Eukrea.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Laurent Pinchart [Wed, 11 Dec 2013 12:40:31 +0000 (13:40 +0100)]
serial: sh-sci: Fix warnings due to improper casts and printk formats
Use the %zu and %pad printk specifiers to print size_t and dma_addr_t
variables, and cast pointers to uintptr_t instead of unsigned int where
applicable. This fixes warnings on platforms where pointers and/or
dma_addr_t have a different size than int.
Cc: linux-serial@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 11 Dec 2013 00:51:04 +0000 (16:51 -0800)]
ARM: shmobile: r8a7778: add USB Func DMAEngine support
HPB-DMAC has 2 channel for USB Func (= D0/D1)
D0 is used as Tx, D1 is used as Rx on this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Ben Dooks [Wed, 11 Dec 2013 10:07:42 +0000 (10:07 +0000)]
ARM: rcar-gen2: Do not setup timer in non-secure mode
If the system has been started in non-secure mode, then the ARM generic
timer is not configurable during the kernel initialisation. Currently
the only thing we can check for is if the timer has been correctly
configured during the boot process.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Ian Molton <ian.molton@codethink.co.uk>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sergei Shtylyov [Sun, 8 Dec 2013 20:50:36 +0000 (23:50 +0300)]
ARM: shmobile: r8a7791: add Ether clock
Add support for R8A7791 Ether clock.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 6 Dec 2013 02:09:30 +0000 (18:09 -0800)]
ARM: shmobile: r8a7778: camera-rcar header cleanup
<linux/platform_data/camera-rcar.h> is needed on BockW,
not setup-r8a7778.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 5 Dec 2013 01:32:42 +0000 (17:32 -0800)]
ARM: shmobile: sh73a0: add FSI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 4 Dec 2013 12:05:56 +0000 (21:05 +0900)]
irqchip: renesas-irqc: Enable mask on suspend
Now when lazy interrupt disable has been enabled in the driver
then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells
the core that only IRQs marked as wakeups need to stay enabled
during Suspend-to-RAM.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 4 Dec 2013 12:05:46 +0000 (21:05 +0900)]
irqchip: renesas-irqc: Use lazy disable
Set the ->irq_enable() and ->irq_disable() methods to NULL
to enable lazy disable of interrupts. This by itself provides
some level of optimization, but is mainly enabled as ground
work for future Suspend-to-RAM wake up support.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Fri, 29 Nov 2013 03:02:12 +0000 (19:02 -0800)]
ARM: shmobile: r8a7790: add I2C support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 3 Dec 2013 02:12:24 +0000 (11:12 +0900)]
ARM: shmobile: r8a7778: add SSIx DMAEngine support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 26 Nov 2013 07:47:10 +0000 (16:47 +0900)]
ARM: shmobile: r8a7779: add HSPI clock support for DT
Based on work for the r8a7778 SoC by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Wed, 4 Dec 2013 01:28:27 +0000 (17:28 -0800)]
ARM: shmobile: r8a7740: add FSI clock support for DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Mon, 2 Dec 2013 02:17:18 +0000 (18:17 -0800)]
ARM: shmobile: r8a7790: add SSI MSTP clocks
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Thu, 21 Nov 2013 07:25:32 +0000 (23:25 -0800)]
ARM: shmobile: r8a7778: add HPBIFx DMAEngine support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Simon Horman [Tue, 10 Dec 2013 07:43:16 +0000 (16:43 +0900)]
ARM: shmobile: Select AUTO_ZRELADDR for EMEV2
Since ("ARM: shmobile: Remove legacy KZM9D board code")
It is now necessary for AUTO_ZRELADDR to be selected
in order for the kernel to build with kzm9d_defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:05:23 +0000 (01:05 -0800)]
ARM: shmobile: r8a7790: tidyup clock table order
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro
for a long term.
But in these days, the ICK clock is defined in random place.
This patch arranges it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:04:35 +0000 (01:04 -0800)]
ARM: shmobile: r8a7790: fixup I2C clock source
I2C clock is based on P clock, not HP clock
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kuninori Morimoto [Tue, 19 Nov 2013 09:04:20 +0000 (01:04 -0800)]
ARM: shmobile: r8a7790: care EXTAL divider settings
EXTAL clock frequency needs 1/2 when
(MD14, MD13, MD19) = (1, x, x).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 20 Nov 2013 08:00:05 +0000 (17:00 +0900)]
ARM: shmobile: Add r8a7791 clocks for thermal devices
Add the r8a7791 thermal device as legacy clocks.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>