[PATCH] Video Select set for VESA FB

Automatically set VIDEO_SELECT when you select VESA FB.  Currently if you
select VESA FB with fbcon but don't select VGA console the box will not
have its video mode set.  Thus you get a blank screen.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gxfb: Turn on the flatpanel power and data

For Geode devices without a flatpanel aware BIOS, this enables the flatpanel
power and data.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gxfb: Fixup flatpanel detection

Use the right MSR and bits to detect if the GX is strapped for TFT or CRT

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gxfb: Support command line options

Add support for command line options for setting the mode and various
settings.

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gxfb: Support flat panel timings

Support TFT panels by correctly setting up the flat panel registers

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver

We cannot assume that the BIOS will be correctly setting up the hardware, so
set some bits in various display registers to enable video output.  Allow an
advanced user to specify a frambuffer size, rather then probing the BIOS.  All
of these fixes were prompted by the OLPC effort.

[akpm@osdl.org: cleanups]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] FB: Get the Geode GX frambuffer size from the BIOS

Use the Geode GX BIOS virtual registers to get the actual size of the
framebuffer.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] backlight: do not power off backlight when unregistering

ACPI drivers like ibm-acpi are moving to the backlight sysfs
infrastructure.  During ibm-acpi testing, I have noticed that
backlight_device_unregister() sets the display brightness and power to
zero.

This causes the display to be dimmed on ibm-acpi module removal.  It will
affect all other ACPI drivers that are being converted to use the backlight
class, as well.  It also affects a number of framebuffer devices that are
used on desktops and laptops which might also not want such behaviour.

Since working around this behaviour requires undesireable hacks, Richard
Purdie decided that we would be better off reverting the changes in the
sysfs class, and adding the code to dim and power off the backlight device
to the drivers that want it.  This patch is my attempt to do so.

Patch against latest linux-2.6.git.  Changes untested, as I lack the
required hardware.  Still, they are trivial enough that, apart from typos,
there is little chance of getting them wrong.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] softcursor.c: avoid unaligned accesses

Fix some possible unaligned accesses when accessing fields of 'image'
pointer.  Indeed this pointer was obtained by allocating a block of memory
that embeds a temporary array plus an image structure.  The temporary
buffer was located at the start of the allocated block and depending on its
size, the image structure which comes right after can be unaligned.

For example when using mini fonts (4x6) (cursor's width is 4 and its height
is 6) the temporary buf size is 6 bytes.

Therefore this patch moves the image structure to the start of the block
and moves the temporary buffer right after.  It makes 'image' pointer
always aligned and since the tempo buf is a buffer of char, it's always
correctly aligned as well.

It also fixes the file header alignement.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] backlight: lcd: Remove dependenct from the framebuffer layer

The backlight layer should be independent from the framebuffer layer.  It
can use the services offered by the framebuffer, but its absence should not
prevent the backlight/lcd layer from functioning.

[akpm@osdl.org: cleanups]
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] visws: sgivwfb as module needs exports

With CONFIG_FB_SGIVW=m:
WARNING: "sgivwfb_mem_size" [drivers/video/sgivwfb.ko] undefined!
WARNING: "sgivwfb_mem_phys" [drivers/video/sgivwfb.ko] undefined!

(or don't allow FB_SGIVW=m in Kconfig)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/video/*: use kmemdup()

From: Eric Sesterhenn <snakebyte@gmx.de>

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Improve power management

Some register were only set in aty_init() which is not called on resume.  I
added the aty_resume_chip() function to reset those registers on resume.

Susped-to-ram now works on a HP Omnibook 6000 with acpi_sleep=s3_bios.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Improve atyfb_atari_probe()

Improve atyfb_atari_probe():
* Call correct_chipset() so that more par members, par->features in
  particular, get initialized.
* If probe fails iounmap() the mapped regions and continue probing for more
  adapters.

Only verified to cross-compile due to lack of hardware.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Remove aty_cmap_regs

Remove aty_cmap_regs. Access the LUT in the same way as other registers.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Fix __init and __devinit annotations

Fix some __init and __devinit annotations.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Remove pointless aty_init() argument

The 'name' argument of aty_init() is pointless because the bus type can be
queried from the hardware.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Fix blanking level transitions

Fix a minor problem in blanking level transitions.  Reducing the blanking
level gradually was impossible.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Fix sparse warnings

Silence some sparse warnings:
* Remove casts from atari out_le32() and friends.
* Move accel functions' declarations to atyfb.h.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Fix compiler warnings

Fix some compiler warnings and remove an #ifdef.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb: Remove FIXME

atyfb has used the auxiliary register aperture for a long time.  Remove a
related FIXME which was accidentally left in.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Document the new ioctl

This patch adds a new ioctl range for the mbxfb driver.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Add YUV video overlay support

This patch adds a way to create and use the video plane (YUV overlay) and
scaling video scaling features of the chip.

The overlay is configured, resized and modified using a device specific
ioctl.

Also included in this patch:
  - If no platform data was passed, print an error and exit instead of crashing.
  - Added a write_reg(_dly) macro. This improves readability when
    manipulating chip registers. (no more udelay() after each write).
  - Comments about some issues.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: add more registers to debugfs

This patch fixes debugfs for mbxfb and adds some missing registers.

The way registers were read was out of sync with the rest of the driver (direct
access instead of using readl())

sdram controller registers are now accessible in the sdram/ subdirectory and
some other registers are grouped in the misc/ subdirectory.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Add more registers bits access macros

This patch adds register bits access macros for chip's Video Plane, Scaling
and interrupt registers.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] mbxfb: Fix HSCOEFF3 register address

This patch corrects the address for register HSCOEFF3.

Signed-off-by: Raphael Assenat <raph@8d.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] au11oofb: fix to remove flickering

Currently a lot of flickering is seen on the VGA and LCD port when one
starts a DBAu1100 board, with 'CONFIG_PRINTK=3Dy'.

This patch removes the flickering and as a result all kernel messages come
by in a nice steady fashion.

Signed-off-by: Freddy Spierenburg <freddy@dusktilldawn.nl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] constify vga16fb.c

- move some static data into the .rodata section

- simplify source code for transl_l[] and transl_h[] which makes it more
  readable

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] annotate some variables in vesafb driver as __read_mostly

- annotate some variables in vesafb driver as __read_mostly

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] constify and annotate __read_mostly in vgacon.c and fbmem.c

- annotate some variables from vgacon.c and fbmem.c as __read_mostly
- move the mask[] array in fb_set_logo_truepalette() into the .rodata section

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] various fbdev files: mark structs and array read-only

- move some structs and arrays to the read-only (.rodata) section

[akpm@osdl.org: build fix]
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fbcmap.c: mark structs const or __read_mostly

- Mark the default colormaps read-only, as nobody should be allowed to
  modify them

- Additionally mark color values as __read_mostly since they will only be
  modified (very seldom) by fb_invert_cmaps()

- Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE()
  macro

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s3c2410fb: Add support for STN displays

This patch adds support for stn displays on the s3c2410 arm SoC.

The LCD type is choosen by a new field in the s3c2410fb_mach_info structure
and its value is the value of the PNRMODE bits.  This worth to be noted as
a value of 0 means that you configure a 4 bit dual scan stn display.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video: Get the default mode from the right database

If no default mode is specified, it should be grabbed from the supplied
database, not the default one.

[teanropo@jyu.fi: fix it]
[akpm@osdl.org: simplify it]
[akpm@osdl.org: remove pointless DEFAULT_MODEDB_INDEX]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Tero Roponen <teanropo@jyu.fi>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pmagb-b-fb: Fix a default clock frequency

Inspection of real hardware has revealed one of the clock frequencies known
to be supported by PMAGB-B hardware is off by 3kHz.  Following is a fix.
Please apply.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] video SiS: remove unnecessary variables in SiS_DDC2Delay

Remove unnecesary iteration and accumulator variables from SiS_DDC2Delay.

Originally spotted by Jesper Juhl <jesper.juhl@gmail.com>.

Cc: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: David Rientjes <rientjes@cs.washington.edu>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] igafb: switch to pci_get API

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] atyfb, rivafb: minor fixes

aty128fb: return an error in the unlikely event that we cannot calculate
some key PLL info

rivafb:
* call CalcStateExt() directly, rather than via function pointers, since
  CalcStateExt() is the only value ever assigned to ->CalcStateExt().
* propagate error return back from CalcVClock() through callers

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/S3triofb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/amifb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/atafb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/atyfb_base

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/cirrusfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/cyberfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/ffb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/fm2fb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/hpfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/macfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/offb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/platinumfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/pvr2fb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/retz3fb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/stifb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/tgafb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/tridentfb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/vesafb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ioremap balanced with iounmap for drivers/video/virgefb

ioremap must be balanced by an iounmap and failing to do so can result in a
memory leak.

Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sl82c105: straighten up IDE control/status register caching

Straighten up the IDE control/status register caching -- you *really* can't
cache the shared register per-channel and hope that it won't get out ouf
sync.

Set the PIO fallback mode to PIO0 for the slave drive as well as master --
there was no point in having them different (most probably a resutl of
typo).

Do a bit of reformat and cleanup while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] pdc202xx_new: fix PIO mode setup

Fix pdcnew_tune_drive() to always set the PIO mode requested, not pick the
best possible one, change pdcnew_config_drive_xfer_rate() accordingly, and
get rid of the duplicate tuneproc() call in config_chipset_for_dma().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ide: more conversion to pci_get APIs

This completes IDE except for one use which requires a new core PCI function
and will be polished up at the end

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: fix sys_sysctl interface of ipc sysctls

Currently there is a regression and the ipc sysctls don't show up in the
binary sysctl namespace.

This patch adds sysctl_ipc_data to read data/write from the appropriate
namespace and deliver it in the expected manner.

[akpm@osdl.org: warning fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: simplify ipc ns specific sysctls

Refactor the ipc sysctl support so that it is simpler, more readable, and
prepares for fixing the bug with the wrong values being returned in the
sys_sysctl interface.

The function proc_do_ipc_string() was misnamed as it never handled strings.
It's magic of when to work with strings and when to work with longs belonged
in the sysctl table.  I couldn't tell if the code would work if you disabled
the ipc namespace but it certainly looked like it would have problems.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: implement sysctl_uts_string()

The problem: When using sys_sysctl we don't read the proper values for the
variables exported from the uts namespace, nor do we do the proper locking.

This patch introduces sysctl_uts_string which properly fetches the values and
does the proper locking.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] sysctl: simplify sysctl_uts_string

The binary interface to the namespace sysctls was never implemented resulting
in some really weird things if you attempted to use sys_sysctl to read your
hostname for example.

This patch series simples the code a little and implements the binary sysctl
interface.

In testing this patch series I discovered that our 32bit compatibility for the
binary sysctl interface is imperfect.  In particular KERN_SHMMAX and
KERN_SMMALL are size_t sized quantities and are returned as 8 bytes on to
32bit binaries using a x86_64 kernel.  However this has existing for a long
time so it is not a new regression with the namespace work.

Gads the whole sysctl thing needs work before it stops being easy to shoot
yourself in the foot.

Looking forward a little bit we need a better way to handle sysctls and
namespaces as our current technique will not work for the network namespace.
I think something based on the current overlapping sysctl trees will work but
the proc side needs to be redone before we can use it.

This patch:

Introduce get_uts() and put_uts() (used later) and remove most of the special
cases for when UTS namespace is compiled in.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: defaults likely to please a new user

Assign defaults most likely to please a new user:
 1) generate some logging output
    (verbose=2)
 2) avoid injecting failures likely to lock up UI
    (ignore_gfp_wait=1, ignore_gfp_highmem=1)

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: optimize and simplify should_fail()

Trivial optimization and simplification of should_fail().

Do cheaper disqualification tests first (performance gain not quantified).
Simplify logic; eliminate goto.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: Clamp debugfs stacktrace-depth to MAX_STACK_TRACE_DEPTH

Clamp /debug/fail*/stacktrace-depth to MAX_STACK_TRACE_DEPTH.  Ensures that a
read of /debug/fail*/stacktrace-depth always returns a truthful answer.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: Use bool-true-false throughout

Use bool-true-false throughout.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: Correct, disambiguate, and reformat documentation

Correct, disambiguate, and reformat documentation.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection: stacktrace filtering kconfig fix

`select' doesn't work very well.  With alpha `make allmodconfig' we end up
with CONFIG_STACKTRACE enabled, so we end up with undefined save_stacktrace()
at link time.

Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection Kconfig cleanup

- Fix some spelling and grammatical errors

- Make the Kconfig menu more conventional.  First you select
  fault-injection, then under that you select particular clients of it.

Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault injection: stacktrace filtering

This patch provides stacktrace filtering feature.

The stacktrace filter allows failing only for the caller you are
interested in.

For example someone may want to inject kmalloc() failures into
only e100 module. they want to inject not only direct kmalloc() call,
but also indirect allocation, too.

- e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone
  --> kmem_cache_alloc

This patch enables to detect function calls like this by stacktrace
and inject failures. The script Documentaion/fault-injection/failmodule.sh
helps it.

The range of text section of loaded e100 is expected to be
[/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text)

So failmodule.sh stores these values into /debug/failslab/address-start
and /debug/failslab/address-end. The maximum stacktrace depth is specified
by /debug/failslab/stacktrace-depth.

Please see the example that demonstrates how to inject slab allocation
failures only for a specific module
in Documentation/fault-injection/fault-injection.txt

[dwm@meer.net: reject failure if any caller lies within specified range]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault injection: process filtering for fault-injection capabilities

This patch provides process filtering feature.
The process filter allows failing only permitted processes
by /proc/<pid>/make-it-fail

Please see the example that demostrates how to inject slab allocation
failures into module init/cleanup code
in Documentation/fault-injection/fault-injection.txt

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection capability for disk IO

This patch provides fault-injection capability for disk IO.

Boot option:

fail_make_request=<probability>,<interval>,<space>,<times>

<interval> -- specifies the interval of failures.

<probability> -- specifies how often it should fail in percent.

<space> -- specifies the size of free space where disk IO can be issued
   safely in bytes.

<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_make_request/interval
/debug/fail_make_request/probability
/debug/fail_make_request/specifies
/debug/fail_make_request/times

Example:

fail_make_request=10,100,0,-1
echo 1 > /sys/blocks/hda/hda1/make-it-fail

generic_make_request() on /dev/hda1 fails once per 10 times.

Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection capability for alloc_pages()

This patch provides fault-injection capability for alloc_pages()

Boot option:

fail_page_alloc=<interval>,<probability>,<space>,<times>

<interval> -- specifies the interval of failures.

<probability> -- specifies how often it should fail in percent.

<space> -- specifies the size of free space where memory can be
   allocated safely in pages.

<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/fail_page_alloc/interval
/debug/fail_page_alloc/probability
/debug/fail_page_alloc/specifies
/debug/fail_page_alloc/times
/debug/fail_page_alloc/ignore-gfp-highmem
/debug/fail_page_alloc/ignore-gfp-wait

Example:

fail_page_alloc=10,100,0,-1

The page allocation (alloc_pages(), ...) fails once per 10 times.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection capability for kmalloc

This patch provides fault-injection capability for kmalloc.

Boot option:

failslab=<interval>,<probability>,<space>,<times>

<interval> -- specifies the interval of failures.

<probability> -- specifies how often it should fail in percent.

<space> -- specifies the size of free space where memory can be
   allocated safely in bytes.

<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/failslab/interval
/debug/failslab/probability
/debug/failslab/specifies
/debug/failslab/times
/debug/failslab/ignore-gfp-highmem
/debug/failslab/ignore-gfp-wait

Example:

failslab=10,100,0,-1

slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault-injection capabilities infrastructure

This patch provides base functions implement to fault-injection
capabilities.

- The function should_fail() is taken from failmalloc-1.0
  (http://www.nongnu.org/failmalloc/)

[akpm@osdl.org: cleanups, comments, add __init]
Cc: <okuji@enbug.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fault injection: documentation and scripts

This patch set provides some fault-injection capabilities.

- kmalloc() failures

- alloc_pages() failures

- disk IO errors

We can see what really happens if those failures happen.

In order to enable these fault-injection capabilities:

1. Enable relevant config options (CONFIG_FAILSLAB, CONFIG_PAGE_ALLOC,
   CONFIG_MAKE_REQUEST) and if you want to configure them via debugfs,
   enable CONFIG_FAULT_INJECTION_DEBUG_FS.

2. Build and boot with this kernel

3. Configure fault-injection capabilities behavior by boot option or debugfs

   - Boot option

     failslab=
     fail_page_alloc=
     fail_make_request=

   - Debugfs

     /debug/failslab/*
     /debug/fail_page_alloc/*
     /debug/fail_make_request/*

   Please refer to the Documentation/fault-injection/fault-injection.txt
   for details.

4. See what really happens.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] nfsd: replace kmalloc+memset with kcalloc + simplify NULL check

Replace kmalloc+memset with kcalloc and simplify

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NFS3: Calculate 'w' a bit later in nfs3svc_encode_getaclres()

NFS3: Calculate 'w' a bit later in nfs3svc_encode_getaclres()
      This is a small performance optimization since we can return before
      needing 'w'. It also saves a few bytes of .text :
      Before:
           text    data     bss     dec     hex filename
           1632     140       0    1772     6ec fs/nfsd/nfs3acl.o
      After:
           text    data     bss     dec     hex filename
           1624     140       0    1764     6e4 fs/nfsd/nfs3acl.o

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] NFS2: Calculate 'w' a bit later in nfsaclsvc_encode_getaclres()

NFS2: Calculate 'w' a bit later in nfsaclsvc_encode_getaclres()
      This is a small performance optimization since we can return before
      needing 'w'. It also saves a few bytes of .text :
      Before:
           text    data     bss     dec     hex filename
           2406     212       0    2618     a3a fs/nfsd/nfs2acl.o
      After:
           text    data     bss     dec     hex filename
           2400     212       0    2612     a34 fs/nfsd/nfs2acl.o

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] lockdep: annotate nfsd4 recover code

> =============================================
> [ INFO: possible recursive locking detected ]
> 2.6.18-1.2724.lockdepPAE #1
> ---------------------------------------------
> nfsd/6884 is trying to acquire lock:
>  (&inode->i_mutex){--..}, at: [<c04811e5>] vfs_rmdir+0x73/0xf4
>
> but task is already holding lock:
>  (&inode->i_mutex){--..}, at: [<f8dfa621>]
> nfsd4_clear_clid_dir+0x1f/0x3d [nfsd]
>
> other info that might help us debug this:
> 3 locks held by nfsd/6884:
>  #0:  (hash_sem){----}, at: [<f8de05eb>] nfsd+0x181/0x2ea [nfsd]
>  #1:  (client_mutex){--..}, at: [<f8df6d19>]
> nfsd4_setclientid_confirm+0x3b/0x2cf [nfsd]
>  #2:  (&inode->i_mutex){--..}, at: [<f8dfa621>]
> nfsd4_clear_clid_dir+0x1f/0x3d [nfsd]
>
> stack backtrace:
>  [<c040524d>] dump_trace+0x69/0x1af
>  [<c04053ab>] show_trace_log_lvl+0x18/0x2c
>  [<c040595f>] show_trace+0xf/0x11
>  [<c0405a53>] dump_stack+0x15/0x17
>  [<c043ca7a>] __lock_acquire+0x110/0x9b6
>  [<c043d91e>] lock_acquire+0x5c/0x7a
>  [<c061a41b>] __mutex_lock_slowpath+0xde/0x234
>  [<c04811e5>] vfs_rmdir+0x73/0xf4
>  [<f8dfa62b>] nfsd4_clear_clid_dir+0x29/0x3d [nfsd]
>  [<f8dfa733>] nfsd4_remove_clid_dir+0xb8/0xf8 [nfsd]
>  [<f8df6e90>] nfsd4_setclientid_confirm+0x1b2/0x2cf [nfsd]
>  [<f8def19a>] nfsd4_proc_compound+0x137a/0x166c [nfsd]
>  [<f8de00d5>] nfsd_dispatch+0xc5/0x180 [nfsd]
>  [<f8d09d83>] svc_process+0x3bd/0x631 [sunrpc]
>  [<f8de0604>] nfsd+0x19a/0x2ea [nfsd]
>  [<c0404e27>] kernel_thread_helper+0x7/0x10
> DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
> Leftover inexact backtrace:
>  =======================

Some nesting annotation to the nfsd4 recovery code.
The vfs operations called will take dentry->d_inode->i_mutex.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ISDN: fix warnings

* diva, sedlbauer: the 'ready' label is only used in certain configurations
* hfc_pci:
- cast 'arg' to proper size for testing and printing
- print out 'void __iomem *' variables with %p,
  rather than using incorrect casts that throw warnings

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] i4l: remove the broken HISAX_AMD7930 option

HISAX_AMD7930 was never anywhere near to being working, and this doesn't
seem to change in the forseeable future.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] isdn: replace kmalloc+memset with kzalloc

Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/isdn/*: trivial vsnprintf() conversion

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ISDN: Avoid a potential NULL ptr deref in ippp

There's a potential problem in isdn_ppp.c::isdn_ppp_decompress().
dev_alloc_skb() may fail and return NULL. If it does we will be passing a
NULL skb_out to ipc->decompress() and may also end up
dereferencing a NULL pointer at

    *proto = isdn_ppp_strip_proto(skb_out);

Correct this by testing 'skb_out' against NULL early and bail out.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] isdn: fix missing unregister_capi_driver

unregister_capi_driver() needs to be called in module cleanup.
(It fixes data corruption by reloading t1isa driver)

Cc: Kai Germaschewski <kai.germaschewski@gmx.de>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/isdn: Handcrafted MIN/MAX Macro removal

Cleanups done to use min/max macros from kernel.h.  Handcrafted MIN/MAX
macros are changed to use macros in kernel.h

[akpm@osdl.org: warning fix]
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: cyclades, fix warnings

fix gcc signed/unsigned warnings

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: cyclades, cleanup

- remove cvs rcsid and alter code that uses it.
- allow a semicolon after use of macro to not confuse parsers (e.g. indent)
  by do {} while (0)
- JIFFIES_DIFF is simple subtraction, subtract directly
- returns cleanup -- do not put values in parenthesis and do not return nothing
  at the end of void functions
- comments are /* */ in C (not //)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: cyclades, Lindent the code

make the code indented by tabs.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: cyclades, save indent levels

Save 3 indent levels in interrupt routine by moving the code to a separate
function.  This needs to be done to allow Lindent do its work, since only 4
columns are used for indenting now and hence Lindent makes a big mess in the
code, when moves it 4*5 columns to the right.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, use mod_timer

Do not set expires by hand, use kernel helper, which also calls add_timer.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, dynamic tty device

register tty device dynamically according to the count of board ports.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, change init sequence

Reorganizate module init and exit and implement logic, when something fails in
these functions.  The former is needed for proper handling dynamic
tty_register_device.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, move init and exit code

Let's have these function at the end of the driver and expand stli_init
directly into module_init fucntion, since there is nothing other to have
there.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, fix enabling

Enable ISA cards before pci_register_driver and then, enable each PCI card in
probe function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, correct fail paths

Check more retvals and react somehow.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Char: istallion, free only isa

Only ISA cards should be freed in module exit.  Pci probed are freed in
pci_remove.  Define a flag, where we store this info a what to check against.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>