Sanjoy Das [Thu, 16 Jul 2015 22:08:37 +0000 (22:08 +0000)]
[SCEV][NFC] Use triple-slash (///) for comment.
Makes the comments for proveNoWrapByVaryingStart consistent with the
rest of ScalarEvolution.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242451
91177308-0d34-0410-b5e6-
96231b3b80d8
Simon Pilgrim [Thu, 16 Jul 2015 21:44:53 +0000 (21:44 +0000)]
Fix spelling. NFCI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242448
91177308-0d34-0410-b5e6-
96231b3b80d8
Tim Northover [Thu, 16 Jul 2015 21:30:21 +0000 (21:30 +0000)]
AArch64: make inexact signalling on round Darwin-specific
C11 leaves the choice on whether round-to-integer operations set the inexact
flag implementation-defined. Darwin does expect it to be set, but this seems to
be against the intent of the IEEE document and slower to implement anyway. So
it should be opt-in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242446
91177308-0d34-0410-b5e6-
96231b3b80d8
Simon Pilgrim [Thu, 16 Jul 2015 21:14:26 +0000 (21:14 +0000)]
[X86][SSE] Added nounwind attribute to vector shift tests.
Stop i686 codegen from generating cfi directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242443
91177308-0d34-0410-b5e6-
96231b3b80d8
Bill Schmidt [Thu, 16 Jul 2015 21:14:07 +0000 (21:14 +0000)]
[PowerPC] v4i32 is a VSRCRegClass
I was looking at some vector code generation and kept seeing
unnecessary vector copies into the Altivec half of the VSX registers.
I discovered that we overlooked v4i32 when adding the register classes
for VSX; we only added v4f32 and v2f64. This means that anything that
canonicalizes into v4i32 (which is a LOT of stuff) ends up being
forced into VRRC on its way to VSRC.
The fix is one line. The rest of the patch is fixing up some test
cases whose code generation has changed as a result.
This seems like it would be a good candidate for backport to 3.7.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242442
91177308-0d34-0410-b5e6-
96231b3b80d8
Philip Reames [Thu, 16 Jul 2015 21:10:46 +0000 (21:10 +0000)]
List supported architectures for StackMap section and related intrinsics
Not having this documented led to some confusion in a recent review thread.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242441
91177308-0d34-0410-b5e6-
96231b3b80d8
Simon Pilgrim [Thu, 16 Jul 2015 21:00:57 +0000 (21:00 +0000)]
[X86][SSE] Updated vector conversion test names.
I'll be adding further tests shortly so need a more thorough naming convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242440
91177308-0d34-0410-b5e6-
96231b3b80d8
Eli Bendersky [Thu, 16 Jul 2015 20:42:38 +0000 (20:42 +0000)]
Streamline the coding style in NVPTXLowerAggrCopies
Make the style consistent with LLVM style throughout and clang-format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242439
91177308-0d34-0410-b5e6-
96231b3b80d8
Matthias Braun [Thu, 16 Jul 2015 20:27:01 +0000 (20:27 +0000)]
MachineInstr: Explain the subtle semantics of uses()/defs()
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242438
91177308-0d34-0410-b5e6-
96231b3b80d8
Jingyue Wu [Thu, 16 Jul 2015 20:13:48 +0000 (20:13 +0000)]
[NVPTX] enable SpeculativeExecution in NVPTX
Summary:
SpeculativeExecution enables a series straight line optimizations (such
as SLSR and NaryReassociate) on conditional code. For example,
if (...)
... b * s ...
if (...)
... (b + 1) * s ...
speculative execution can hoist b * s and (b + 1) * s from then-blocks,
so that we have
... b * s ...
if (...)
...
... (b + 1) * s ...
if (...)
...
Then, SLSR can rewrite (b + 1) * s to (b * s + s) because after
speculative execution b * s dominates (b + 1) * s.
The performance impact of this change is significant. It speeds up the
benchmarks running EigenFloatContractionKernelInternal16x16
(https://bitbucket.org/eigen/eigen/src/
ba68f42fa69e4f43417fe1e52669d4dd5d2b3bee/unsupported/Eigen/CXX11/src/Tensor/TensorContractionCuda.h?at=default#cl-526)
by roughly 2%. Some internal benchmarks that have the above code pattern
are improved by up to 40%. No significant slowdowns are observed on
Eigen CUDA microbenchmarks.
Reviewers: jholewinski, broune, eliben
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11201
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242437
91177308-0d34-0410-b5e6-
96231b3b80d8
Matthias Braun [Thu, 16 Jul 2015 20:02:37 +0000 (20:02 +0000)]
AArch64: Implement conditional compare sequence matching.
This is a new iteration of the reverted r238793 /
http://reviews.llvm.org/D8232 which wrongly assumed that any and/or
trees can be represented by conditional compare sequences, however there
are some restrictions to that. This version fixes this and adds comments
that explain exactly what types of and/or trees can actually be
implemented as conditional compare sequences.
Related to http://llvm.org/PR20927, rdar://
18326194
Differential Revision: http://reviews.llvm.org/D10579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242436
91177308-0d34-0410-b5e6-
96231b3b80d8
Tom Stellard [Thu, 16 Jul 2015 19:40:09 +0000 (19:40 +0000)]
AMDPGU/SI: Negative offsets aren't allowed in MUBUF's vaddr operand
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242434
91177308-0d34-0410-b5e6-
96231b3b80d8
Tom Stellard [Thu, 16 Jul 2015 19:40:07 +0000 (19:40 +0000)]
AMDPGU/SI: Use AssertZext node to mask high bit for scratch offsets
Summary:
We can safely assume that the high bit of scratch offsets will never
be set, because this would require at least 128 GB of GPU memory.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11225
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242433
91177308-0d34-0410-b5e6-
96231b3b80d8
Matthias Braun [Thu, 16 Jul 2015 18:55:35 +0000 (18:55 +0000)]
LiveInterval: Document and enforce rules about empty subranges.
Empty subranges are not allowed in a LiveInterval and must be removed
instead: Check this in the verifiers, put a reminder for this in the
comment of the shrinkToUses variant for a single lane and make it
automatic for the shrinkToUses variant for a LiveInterval.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242431
91177308-0d34-0410-b5e6-
96231b3b80d8
Matthias Braun [Thu, 16 Jul 2015 18:55:32 +0000 (18:55 +0000)]
Do not duplicate method name in comment, remove duplicate comment
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242430
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Thu, 16 Jul 2015 18:41:41 +0000 (18:41 +0000)]
Delete an unused function.
Patch by Xan López!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242429
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Thu, 16 Jul 2015 18:38:13 +0000 (18:38 +0000)]
Revert "Add missing load/store flags to thumb2 instructions."
This reverts commit r242300.
This is causing buildbot failures which we are investigating.
I'll reapply once we know whats going on, but for now want to
get the bots green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242428
91177308-0d34-0410-b5e6-
96231b3b80d8
Cong Hou [Thu, 16 Jul 2015 18:23:57 +0000 (18:23 +0000)]
Rename LoopInfo::Analyze() to LoopInfo::analyze() and turn its parameter type to const&.
The benefit of turning the parameter of LoopInfo::analyze() to const& is that it now can accept a rvalue.
http://reviews.llvm.org/D11250
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242426
91177308-0d34-0410-b5e6-
96231b3b80d8
Peter Collingbourne [Thu, 16 Jul 2015 17:42:21 +0000 (17:42 +0000)]
Internalize: internalize comdat members as a group, and drop comdat on such members.
Internalizing an individual comdat group member without also internalizing
the other members of the comdat can break comdat semantics. For example,
if a module contains a reference to an internalized comdat member, and the
linker chooses a comdat group from a different object file, this will break
the reference to the internalized member.
This change causes the internalizer to only internalize comdat members if all
other members of the comdat are not externally visible. Once a comdat group
has been fully internalized, there is no need to apply comdat rules to its
members; later optimization passes (e.g. globaldce) can legally drop individual
members of the comdat. So we drop the comdat attribute from all comdat members.
Differential Revision: http://reviews.llvm.org/D10679
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242423
91177308-0d34-0410-b5e6-
96231b3b80d8
Benjamin Kramer [Thu, 16 Jul 2015 16:51:48 +0000 (16:51 +0000)]
[NVPTX] Don't leak dead instructions after unlinking them from the BasicBlock
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242417
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 16:47:18 +0000 (16:47 +0000)]
Fix Kaleidoscope tuto: ExecutionEngine->getDataLayout() returns a ref
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242416
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 16:34:23 +0000 (16:34 +0000)]
Make ExecutionEngine owning a DataLayout
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242414
91177308-0d34-0410-b5e6-
96231b3b80d8
Eli Bendersky [Thu, 16 Jul 2015 16:27:19 +0000 (16:27 +0000)]
Correct lowering of memmove in NVPTX
This fixes https://llvm.org/bugs/show_bug.cgi?id=24056
Also a bit of refactoring along the way.
Differential Revision: http://reviews.llvm.org/D11220
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242413
91177308-0d34-0410-b5e6-
96231b3b80d8
Tom Stellard [Thu, 16 Jul 2015 16:13:34 +0000 (16:13 +0000)]
AMDGPU/R600: Remove unused variable
This fixes a warning introduced by r242410.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242412
91177308-0d34-0410-b5e6-
96231b3b80d8
Tom Stellard [Thu, 16 Jul 2015 15:38:29 +0000 (15:38 +0000)]
AMDPGU/R600: Replace llvm_unreachable() call with LLVMContext::emitError()
Summary:
This fixes an issue on MIPS where the infinite-loop-evergreen.ll test
was failing to terminate.
Fixes PR24147.
Reviewers: arsenm, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242410
91177308-0d34-0410-b5e6-
96231b3b80d8
James Molloy [Thu, 16 Jul 2015 15:22:46 +0000 (15:22 +0000)]
[Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242409
91177308-0d34-0410-b5e6-
96231b3b80d8
Alexandros Lamprineas [Thu, 16 Jul 2015 14:54:41 +0000 (14:54 +0000)]
- TargetParser does not handle armv7l in parseArchProfile().
- ARM V7L matches the 'A' profile of ARM architecture.
Change-Id: I80c8b973f5c93fb040c177a227644d56b1b83ea8
Phabricator: http://reviews.llvm.org/D11261
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242406
91177308-0d34-0410-b5e6-
96231b3b80d8
Silviu Baranga [Thu, 16 Jul 2015 14:02:58 +0000 (14:02 +0000)]
Fix memcheck interval ends for pointers with negative strides
Summary:
The checking pointer grouping algorithm assumes that the
starts/ends of the pointers are well formed (start <= end).
The runtime memory checking algorithm also assumes this by doing:
start0 < end1 && start1 < end0
to detect conflicts. This check only works if start0 <= end0 and
start1 <= end1.
This change correctly orders the interval ends by either checking
the stride (if it is constant) or by using min/max SCEV expressions.
Reviewers: anemet, rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242400
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Kuperstein [Thu, 16 Jul 2015 13:55:39 +0000 (13:55 +0000)]
[X86] Test for r242395 (Fix emitPrologue() to make less assumptions about pushes)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242399
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Kuperstein [Thu, 16 Jul 2015 13:54:14 +0000 (13:54 +0000)]
[X86] Reapply r240257 : "Allow more call sequences to use push instructions for argument passing"
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
This should no longer cause miscompiles, now that a bug in emitPrologue was fixed in r242395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242398
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Kuperstein [Thu, 16 Jul 2015 12:27:59 +0000 (12:27 +0000)]
[X86] Fix emitPrologue() to make less assumptions about pushes
When X86FrameLowering::emitPrologue() looks for where to insert the %esp subtraction
to allocate stack space for local allocations, it assumes that any sequence of push
instructions that starts at function entry consists purely of spills of callee-save
registers.
This may be false, since from some point forward, the pushes may pushing arguments
to a subsequent function call.
This caused a miscompile that was exposed by r240257, and is not easily testable
since r240257 was reverted. A test will be committed separately after r240257 is
reapplied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242395
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Kuperstein [Thu, 16 Jul 2015 12:20:31 +0000 (12:20 +0000)]
Revert "Make ExecutionEngine owning a DataLayout"
Reverting to fix buildbot breakage.
This reverts commit r242387.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242394
91177308-0d34-0410-b5e6-
96231b3b80d8
Benjamin Kramer [Thu, 16 Jul 2015 11:12:05 +0000 (11:12 +0000)]
[Mips] Make helper function static, NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242393
91177308-0d34-0410-b5e6-
96231b3b80d8
Tobias Grosser [Thu, 16 Jul 2015 08:20:37 +0000 (08:20 +0000)]
Add PM extension point EP_VectorizerStart
This extension point allows passes to be executed right before the vectorizer
and other highly target specific optimizations are run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242389
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 06:23:12 +0000 (06:23 +0000)]
Add missing break in switch case in R600ISelLowering
Summary: Catched by coverity.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11120
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242388
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 06:17:14 +0000 (06:17 +0000)]
Make ExecutionEngine owning a DataLayout
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242387
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 06:11:10 +0000 (06:11 +0000)]
Move most user of TargetMachine::getDataLayout to the Module one
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242386
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 06:04:17 +0000 (06:04 +0000)]
Remove DataLayout from TargetLoweringObjectFile, redirect to Module
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242385
91177308-0d34-0410-b5e6-
96231b3b80d8
Mehdi Amini [Thu, 16 Jul 2015 05:59:25 +0000 (05:59 +0000)]
Redirect pointerSize query to the TargetMachine in ASMPrinter
Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242384
91177308-0d34-0410-b5e6-
96231b3b80d8
Adam Nemet [Thu, 16 Jul 2015 02:48:05 +0000 (02:48 +0000)]
[LAA] Split out a helper to check the pointer partitions, NFC
This is made a static public member function to allow the transition of
this logic from LAA to LoopDistribution. (Technically, it could be an
implementation-local static function but then it would not be accessible
from LoopDistribution.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242376
91177308-0d34-0410-b5e6-
96231b3b80d8
Reid Kleckner [Thu, 16 Jul 2015 01:30:00 +0000 (01:30 +0000)]
Revert "[X86] Allow more call sequences to use push instructions for argument passing"
It miscompiles some code and a reduced test case has been sent to the
author.
This reverts commit r240257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242373
91177308-0d34-0410-b5e6-
96231b3b80d8
Reid Kleckner [Thu, 16 Jul 2015 01:16:39 +0000 (01:16 +0000)]
Revert "Update LLVM bindings after r239940. ..."
Revert the changes to the C API LLVMBuildLandingPad that were part of
the personality function move. We now set the personality on the parent
function when the C API attempts to construct a landingpad with a
personality.
This reverts commit r240010.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242372
91177308-0d34-0410-b5e6-
96231b3b80d8
Alex Lorenz [Thu, 16 Jul 2015 00:58:33 +0000 (00:58 +0000)]
Fix broken testcase from r242358.
The testcase failed on non X86 targets, because I forgot to pass the
'-march=x86-64' option into llc for one of the X86 specific tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242370
91177308-0d34-0410-b5e6-
96231b3b80d8
Akira Hatanaka [Thu, 16 Jul 2015 00:58:23 +0000 (00:58 +0000)]
[ARM] Define a subtarget feature that is used to avoid using movt/movw
pairs for 32-bit immediates.
This change is needed to avoid emitting movt/movw pairs when doing LTO
and do so on a per-function basis.
Out-of-tree projects currently using cl::opt option -arm-use-movt=0 or
false to avoid emitting movt/movw pairs should make changes to add
subtarget feature "+no-movt" (see the changes made to clang in r242368).
rdar://problem/
21529937
Differential Revision: http://reviews.llvm.org/D11026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242369
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Thu, 16 Jul 2015 00:38:34 +0000 (00:38 +0000)]
Trying to fix the windows bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242367
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Thu, 16 Jul 2015 00:14:49 +0000 (00:14 +0000)]
Fix handling of relative paths in thin archives.
The member has to end up with a path relative to the archive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242362
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Thu, 16 Jul 2015 00:09:18 +0000 (00:09 +0000)]
Clear kill flags in ARMLoadStoreOptimizer.
The pass here was clearing kill flags on instructions which had
their sources killed in the instruction being combined. But
given that the new instruction is inserted after the existing ones,
any existing instructions with kill flags will lead to the verifier
complaining that we are reading an undefined physreg.
For example, what we had prior to this optimization is
t2STRi12 %R1, %SP, 12
t2STRi12 %R1<kill>, %SP, 16
t2STRi12 %R0<kill>, %SP, 8
and prior to this fix that would generate
t2STRi12 %R1<kill>, %SP, 16
t2STRDi8 %R0<kill>, %R1, %SP, 8
This is clearly incorrect as it didn't clear the kill flag on R1
used with offset 16 because there was no kill flag on the instruction
with offset 12.
After this change we clear the kill flag on the offset 16 instruction
because we know it will be used afterwards in the new instruction.
I haven't provided a test case. I have a small test, but even it is
very sensitive to register allocation order which isn't ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242359
91177308-0d34-0410-b5e6-
96231b3b80d8
Alex Lorenz [Wed, 15 Jul 2015 23:38:35 +0000 (23:38 +0000)]
MIR Serialization: Serialize the jump table index operands.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242358
91177308-0d34-0410-b5e6-
96231b3b80d8
Alex Lorenz [Wed, 15 Jul 2015 23:31:07 +0000 (23:31 +0000)]
MIR Serialization: Serialize the jump table info.
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242357
91177308-0d34-0410-b5e6-
96231b3b80d8
Sean Silva [Wed, 15 Jul 2015 23:23:02 +0000 (23:23 +0000)]
Add a test for r242281 from an old patch of mine.
This isn't thorough, but should serve as a sanity check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242356
91177308-0d34-0410-b5e6-
96231b3b80d8
Cong Hou [Wed, 15 Jul 2015 23:20:34 +0000 (23:20 +0000)]
Remove a private member of BranchProbabilityInfo which is not used at all.
The member to be removed is LoopInfo *LI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242355
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 23:15:33 +0000 (23:15 +0000)]
llvm-ar: Don't write the directory in the string table.
We were already doing the right thing for short file names, but not long
ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242354
91177308-0d34-0410-b5e6-
96231b3b80d8
Cong Hou [Wed, 15 Jul 2015 22:48:29 +0000 (22:48 +0000)]
Create a wrapper pass for BranchProbabilityInfo.
This new wrapper pass is useful when we want to do branch probability analysis conditionally (e.g. only in PGO mode) but don't want to add one more pass dependence.
http://reviews.llvm.org/D11241
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242349
91177308-0d34-0410-b5e6-
96231b3b80d8
David Majnemer [Wed, 15 Jul 2015 22:48:26 +0000 (22:48 +0000)]
Silence GCC -Wparenthesis warning
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242348
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 22:46:53 +0000 (22:46 +0000)]
For new archive member we only need to store the full path.
We were storing both the path and the file name, which was redundant
and easy to get confused up with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242347
91177308-0d34-0410-b5e6-
96231b3b80d8
Chen Li [Wed, 15 Jul 2015 22:41:13 +0000 (22:41 +0000)]
[LoopUnswitch] Add an else clause to IsTrivialUnswitchCondition() when checking HeaderTerm instruction type
Summary:
This is a trivial code change with no functionality effect.
When LoopUnswitch determines trivial unswitch condition, it checks whether the loop header's terminator instruction is a branch instruction or switch instruction since trivial unswitch condition can only apply to these two instruction types. The current code does not fail the check directly on other instruction types, but check the nullness of LoopExitBB variable instead. The added else clause makes the check fail immediately on other instruction types and makes the code more obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242345
91177308-0d34-0410-b5e6-
96231b3b80d8
Hans Wennborg [Wed, 15 Jul 2015 22:18:25 +0000 (22:18 +0000)]
test-release.sh: Run both .o files through sed before comparing them
On some systems (e.g. Mac OS X), sed will add a newline to the end of
the output if there wasn't one already. This would cause false
cmp errors since the .o file from Phase 2 was passed through sed and
the one from Phase 3 wasn't. Work around this by passing both through
sed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242341
91177308-0d34-0410-b5e6-
96231b3b80d8
Matthias Braun [Wed, 15 Jul 2015 22:16:00 +0000 (22:16 +0000)]
TargetRegisterInfo: Provide a way to check assigned registers in getRegAllocationHints()
Pass a const reference to LiveRegMatrix to getRegAllocationHints()
because some targets can prodive better hints if they can test whether a
physreg has been used for register allocation yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242340
91177308-0d34-0410-b5e6-
96231b3b80d8
Alex Lorenz [Wed, 15 Jul 2015 22:14:49 +0000 (22:14 +0000)]
MIR Serialization: Serialize references from the stack objects to named allocas.
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242339
91177308-0d34-0410-b5e6-
96231b3b80d8
Paul Robinson [Wed, 15 Jul 2015 22:04:54 +0000 (22:04 +0000)]
Add a "debugger tuning" concept that allows us to fine-tune how we
emit debug info, according to the preferences of the different
debuggers used on various targets.
Darwin and FreeBSD default to tuning for LLDB; PS4 defaults to tuning for
the SCE (Sony Computer Entertainment) debugger. All others default to GDB.
Differential Revision: http://reviews.llvm.org/D8506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242338
91177308-0d34-0410-b5e6-
96231b3b80d8
JF Bastien [Wed, 15 Jul 2015 21:51:33 +0000 (21:51 +0000)]
Fix mergefunc infinite loop
Self-referential constants containing references to a merged function
no longer cause the MergeFunctions pass to infinite loop. Also adds a
reproduction IR which would otherwise fail, which was isolated from a similar
issue in Chromium.
Author: jrkoenig
Reviewers: nlewycky, jfb
Subscribers: llvm-commits, nlewycky, jfb
Differential Revision: http://reviews.llvm.org/D11208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242337
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 21:24:07 +0000 (21:24 +0000)]
Simplify a few uses of remove_filename by using parent_path instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242334
91177308-0d34-0410-b5e6-
96231b3b80d8
Hans Wennborg [Wed, 15 Jul 2015 21:06:16 +0000 (21:06 +0000)]
Switch the release script to build with CMake by default (PR21561)
It retains the possibility to use the autoconf build with a
command-line option ('-use-autoconf'), and uses that by default on Darwin since
compiler-rt requires it on that platform.
This commit also removes the "Release-64" flavour and related logic. The script
would previously do two builds unless the '-no-64bit' flag was passed, but on
my machine and from those I asked this always ended up producing two 64-bit builds,
causing much confusion.
It also removes the -build-triple option, which caused the --build= flag to
get passed to ./configure. This was presumably intended for cross-compiling,
but none of the release testers use it. If someone does want to pass it,
they can use '-configure-flags --build=foo' instead.
Differential Revision: http://reviews.llvm.org/D10715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242331
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 20:45:56 +0000 (20:45 +0000)]
Handle the error of trying to convert a regular archive to a thin one.
While at it, test that we can add to a thin archive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242330
91177308-0d34-0410-b5e6-
96231b3b80d8
Cong Hou [Wed, 15 Jul 2015 19:58:26 +0000 (19:58 +0000)]
Rename doFunction() in BFI to calculate() and change its parameters from pointers to references.
http://reviews.llvm.org/D11196
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242322
91177308-0d34-0410-b5e6-
96231b3b80d8
Tobias Edler von Koch [Wed, 15 Jul 2015 19:32:22 +0000 (19:32 +0000)]
Analyze recursive PHI nodes in BasicAA
Summary:
This patch allows phi nodes like
%x = phi [ %incptr, ... ] [ %var, ... ]
%incptr = getelementptr %x, 1
to be analyzed by BasicAliasAnalysis.
In aliasPHI, we can detect incoming values that are recursive GEPs with a
constant offset. Instead of trying to analyze a recursive GEP (and failing),
we now ignore it and instead set the size of the memory referenced by
the PHINode to UnknownSize. This represents all the possible memory
locations the pointer represented by the PHINode could be advanced to
by the GEP.
For now, this new behavior is turned off by default to allow debugging of
performance degradations seen with SPEC/x86 and Hexagon benchmarks.
The flag -basicaa-recphi turns it on.
Reviewers: hfinkel, sanjoy
Subscribers: tobiasvk_caf, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D10368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242320
91177308-0d34-0410-b5e6-
96231b3b80d8
Bruno Cardoso Lopes [Wed, 15 Jul 2015 18:10:46 +0000 (18:10 +0000)]
Revert "Refactor optimizeUncoalescable logic"
Likely broke compilation on ARM:
http://lab.llvm.org:8011/builders/clang-native-arm-lnt/builds/13054
This reverts commit
0b7824464fbe3d3f386e2d4aef6a431422709e53.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242311
91177308-0d34-0410-b5e6-
96231b3b80d8
Bruno Cardoso Lopes [Wed, 15 Jul 2015 18:10:35 +0000 (18:10 +0000)]
Revert "Look through PHIs to find additional register sources"
Likely broke compilation on ARM:
http://lab.llvm.org:8011/builders/clang-native-arm-lnt/builds/13054
This reverts commit
131ce4a838c081516cbfed039fc986b33e3979d6.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242310
91177308-0d34-0410-b5e6-
96231b3b80d8
Cong Hou [Wed, 15 Jul 2015 17:58:15 +0000 (17:58 +0000)]
Test commit.
This is a test commit (one blank line deleted).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242308
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 17:19:39 +0000 (17:19 +0000)]
Delete declared but not implemented functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242304
91177308-0d34-0410-b5e6-
96231b3b80d8
Adrian Prantl [Wed, 15 Jul 2015 17:01:41 +0000 (17:01 +0000)]
Debug Info: Add basic support for external types references.
This is a necessary prerequisite for bootstrapping the emission
of debug info inside modules.
- Adds a FlagExternalTypeRef to DICompositeType.
External types must have a unique identifier.
- External type references are emitted using a forward declaration
with a DW_AT_signature([DW_FORM_ref_sig8]) based on the UID.
http://reviews.llvm.org/D9612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242302
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 16:36:38 +0000 (16:36 +0000)]
Add missing load/store flags to thumb2 instructions.
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242300
91177308-0d34-0410-b5e6-
96231b3b80d8
Bill Schmidt [Wed, 15 Jul 2015 15:45:30 +0000 (15:45 +0000)]
[PPC64LE] Fix vec_sld semantics for little endian
The vec_sld interface provides access to the vsldoi instruction.
Unlike most of the vec_* interfaces, we do not attempt to change the
generated code for vec_sld based on the endian mode. It is too
difficult to correctly infer the desired semantics because of
different element types, and the corrected instruction sequence is
expensive, involving loading a permute control vector and performing a
generalized permute.
For GCC, this was implemented as "Don't touch the vec_sld"
implementation. When it came time for the LLVM implementation, I did
the same thing. However, this was hasty and incorrect. In LLVM's
version of altivec.h, vec_sld was previously defined in terms of the
vec_perm interface. Because vec_perm semantics are adjusted for
little endian, this means that leaving vec_sld untouched causes it to
generate something different for LE than for BE. Not good.
This back-end patch accompanies the changes to altivec.h that change
vec_sld's behavior for little endian. Those changes mean that we see
slightly different code in the back end when trying to recognize a
VSLDOI instruction in isVSLDOIShuffleMask. In particular, a
ShuffleKind of 1 (where the two inputs are identical) must now be
treated the same way as a ShuffleKind of 2 (little endian with
different inputs) when little endian mode is in force. This is
because ShuffleKind of 1 is defined using big-endian numbering.
This has a ripple effect on LowerBUILD_VECTOR, where we create our own
internal VSLDOI instructions. Because these are a ShuffleKind of 1,
they will now have their shift amounts subtracted from 16 when
recognizing the shuffle mask. To avoid problems we have to subtract
them from 16 again before creating the VSLDOI instructions.
There are a couple of other uses of BuildVSLDOI, but these do not need
to be modified because the shift amount is 8, which is unchanged when
subtracted from 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242296
91177308-0d34-0410-b5e6-
96231b3b80d8
Bruno Cardoso Lopes [Wed, 15 Jul 2015 15:35:23 +0000 (15:35 +0000)]
Look through PHIs to find additional register sources
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/
20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242295
91177308-0d34-0410-b5e6-
96231b3b80d8
Bruno Cardoso Lopes [Wed, 15 Jul 2015 15:35:09 +0000 (15:35 +0000)]
Refactor optimizeUncoalescable logic
- Create a new CopyRewriter for Uncoalescable copy-like instructions
- Change the ValueTracker to return a ValueTrackerResult
This makes optimizeUncoalescable looks more like optimizeCoalescable and
use the CopyRewritter infrastructure.
This is also the preparation for looking up into PHI nodes in the
ValueTracker.
Differential Revision: http://reviews.llvm.org/D11195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242294
91177308-0d34-0410-b5e6-
96231b3b80d8
Andrew Wilkins [Wed, 15 Jul 2015 13:03:08 +0000 (13:03 +0000)]
Expose setPersonalityFn to Go
Summary:
Add Value.SetPersonality to the Go bindings. The Go
bindings' Builder.CreateLandingPad has been updated,
removing the obsolete personality argument.
Background
The personality attribute was removed from LandingPadInst
in r239940, and llvm::Function::setPersonalityFn introduced.
There was no corresponding change to either the C API or
Go bindings. The Go bindings were broken until r239940, but
that change was just to ignore the personality argument.
This broke llgo.
Reviewers: majnemer, pcc
Subscribers: deadalnix, llvm-commits, axw
Differential Revision: http://reviews.llvm.org/D11116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242289
91177308-0d34-0410-b5e6-
96231b3b80d8
Benjamin Kramer [Wed, 15 Jul 2015 12:56:19 +0000 (12:56 +0000)]
[PPC] Disassemble little endian ppc instructions in the right byte order
PR24122. The test is simply a byte swapped version of ppc64-encoding.txt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242288
91177308-0d34-0410-b5e6-
96231b3b80d8
Alexandros Lamprineas [Wed, 15 Jul 2015 10:46:21 +0000 (10:46 +0000)]
-Added API for retrieving the default FPU of a CPU from TargetParser.
-Implemented as a table lookup.
Change-Id: Iaad0eaf4b29b06827e6700269496dc1ba20e9018
Phabricator: http://reviews.llvm.org/D11100
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242284
91177308-0d34-0410-b5e6-
96231b3b80d8
Chandler Carruth [Wed, 15 Jul 2015 08:53:29 +0000 (08:53 +0000)]
[PM/AA] Fix *numerous* serious bugs in GlobalsModRef found by
inspection.
While we want to handle calls specially in this code because they should
have been modeled by the call graph analysis that precedes it, we should
*not* be re-implementing the predicates for whether an instruction reads
or writes memory. Those are well defined already. Notably, at least the
following issues seem to be clearly missed before:
- Ordered atomic loads can "write" to memory by causing writes from other
threads to become visible. Similarly for ordered atomic stores.
- AtomicRMW instructions quite obviously both read and write to memory.
- AtomicCmpXchg instructions also read and write to memory.
- Fences read and write to memory.
- Invokes of intrinsics or memory allocation functions.
I don't have any test cases, and I suspect this has never really come up
in the real world. But there is no reason why it wouldn't, and it makes
the code simpler to do this the right way.
While here, I've tried to make the loops significantly simpler as well
and added helpful comments as to what is going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242281
91177308-0d34-0410-b5e6-
96231b3b80d8
Alexey Bataev [Wed, 15 Jul 2015 08:39:35 +0000 (08:39 +0000)]
[SDAG] Optimize unordered comparison in soft-float mode (patch by Anton Nadolskiy)
Current implementation handles unordered comparison poorly in soft-float mode.
Consider (a ULE b) which is a <= b. It is lowered to (ledf2(a, b) <= 0 || unorddf2(a, b) != 0) (in general). We can do better job by lowering it to (__gtdf2(a, b) <= 0).
Such replacement is true for other CMP's (ult, ugt, uge). In general, we just call same function as for ordered case but negate comparison against zero.
Differential Revision: http://reviews.llvm.org/D10804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242280
91177308-0d34-0410-b5e6-
96231b3b80d8
Hal Finkel [Wed, 15 Jul 2015 08:23:05 +0000 (08:23 +0000)]
[PowerPC] Use the MachineCombiner to reassociate fadd/fmul
This is a direct port of the code from the X86 backend (r239486/r240361), which
uses the MachineCombiner to reassociate (floating-point) adds/muls to increase
ILP, to the PowerPC backend. The rationale is the same.
There is a lot of copy-and-paste here between the X86 code and the PowerPC
code, and we should extract at least some of this into CodeGen somewhere.
However, I don't want to do that until this code is enhanced to handle FMAs as
well. After that, we'll be in a better position to extract the common parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242279
91177308-0d34-0410-b5e6-
96231b3b80d8
Hal Finkel [Wed, 15 Jul 2015 08:23:03 +0000 (08:23 +0000)]
[PowerPC] Extend physical register live range in PPCVSXFMAMutate
If the source of the copy that defines the addend is a physical register, then
its existing live range may not extend to the FMA being mutated. Make sure we
extend the live range of the register to meet the FMA because it will become
its operand in this case.
I don't have an independent test case, but it will be exposed by change to be
committed shortly enabling the use of the machine combiner to do fadd/fmul
reassociation, and will be covered by one of the associated regression tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242278
91177308-0d34-0410-b5e6-
96231b3b80d8
Hal Finkel [Wed, 15 Jul 2015 08:22:23 +0000 (08:22 +0000)]
[MachineCombiner] Work with itineraries
MachineCombiner predicated its use of scheduling-based metrics on
hasInstrSchedModel(), but useful conclusions can be drawn from pipeline
itineraries as well. Almost all of the logic (except for resource tracking in
preservesResourceLen) can be used if we have an itinerary, so enable it in that
case as well.
This will be used by the PowerPC backend in an upcoming commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242277
91177308-0d34-0410-b5e6-
96231b3b80d8
Petr Pavlu [Wed, 15 Jul 2015 08:10:30 +0000 (08:10 +0000)]
[AArch64] Fix problems in decoding generic MSR instructions
Bitpatterns rejected by the decoder method of `MSR (immediate)` should be
decoded as the `extended MSR (register)` instruction.
Differential Revision: http://reviews.llvm.org/D7174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242276
91177308-0d34-0410-b5e6-
96231b3b80d8
Chandler Carruth [Wed, 15 Jul 2015 08:09:23 +0000 (08:09 +0000)]
[PM/AA] Cleanup some loops to be range-based. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242275
91177308-0d34-0410-b5e6-
96231b3b80d8
Petr Pavlu [Wed, 15 Jul 2015 08:04:27 +0000 (08:04 +0000)]
[TableGen] Improve decoding options for non-orthogonal instructions
When FixedLenDecoder matches an input bitpattern of form [01]+ with an
instruction bitpattern of form [01?]+ (where 0/1 are static bits and ? are
mixed/variable bits) it passes the input bitpattern to a specific instruction
decoder method which then makes a final decision whether the bitpattern is a
valid instruction or not. This means the decoder must handle all possible
values of the variable bits which sometimes leads to opcode rewrites in the
decoder method when the instructions are not fully orthogonal.
The patch provides a way for the decoder method to say that when it returns
Fail it does not necessarily mean the bitpattern is invalid, but rather that
the bitpattern is definitely not an instruction that is recognized by the
decoder method. The decoder can then try to match the input bitpattern with
other possible instruction bitpatterns.
For example, this allows to solve a situation on AArch64 where the `MSR
(immediate)` instruction has form:
1101 0101 0000 0??? 0100 ???? ???1 1111
but not all values of the ? bits are allowed. The rejected values should be
handled by the `extended MSR (register)` instruction:
1101 0101 000? ???? ???? ???? ???? ????
The decoder will first try to decode an input bitpattern that matches both
bitpatterns as `MSR (immediate)` but currently this puts the decoder method of
`MSR (immediate)` into a situation when it must be able to decode all possible
values of the ? bits, i.e. it would need to rewrite the instruction to `MSR
(register)` when it is not `MSR (immediate)`.
The patch allows to specify that the decoder method cannot determine if the
instruction is valid for all variable values. The decoder method can simply
return Fail when it knows it is definitely not `MSR (immediate)`. The decoder
will then backtrack the decoding and find that it can match the input
bitpattern with the more generic `MSR (register)` bitpattern too.
Differential Revision: http://reviews.llvm.org/D7174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242274
91177308-0d34-0410-b5e6-
96231b3b80d8
Simon Pilgrim [Wed, 15 Jul 2015 08:04:07 +0000 (08:04 +0000)]
[X86][SSE] Added i686/SSE2 vector shift tests.
We were only testing on x86-64, but we should be ensuring decent code gen of i64 shifts on 32-bit targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242273
91177308-0d34-0410-b5e6-
96231b3b80d8
Igor Breger [Wed, 15 Jul 2015 07:08:10 +0000 (07:08 +0000)]
AVX : Fix ISA disabling in case AVX512VL , some instructions should be disabled only if AVX512BW present.
Tests added.
Differential Revision: http://reviews.llvm.org/D11122
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242270
91177308-0d34-0410-b5e6-
96231b3b80d8
Rafael Espindola [Wed, 15 Jul 2015 05:47:46 +0000 (05:47 +0000)]
Initial support for writing thin archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242269
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Zolotukhin [Wed, 15 Jul 2015 01:51:51 +0000 (01:51 +0000)]
Tidy-up test case from r242257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242268
91177308-0d34-0410-b5e6-
96231b3b80d8
Chandler Carruth [Wed, 15 Jul 2015 01:48:40 +0000 (01:48 +0000)]
[vim] Update the syntax to mark REQUIRES lines and not talk about
dejagnu.
I wonder if it would be useful to handle FileCheck prefixes specially?
Especially if we could get some error checking. Suggestions welcome.
Patches more welcome as I have no idea what I'm doing with vim
script....
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242267
91177308-0d34-0410-b5e6-
96231b3b80d8
Chandler Carruth [Wed, 15 Jul 2015 01:36:50 +0000 (01:36 +0000)]
[vim] Add the IR's comment prefix to the comments list. This allows vim
to intelligently wrap prose written in IR comment blocks. This has
bothered me for roughly ever, and my fellow IRC denziens convinced me to
fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242266
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 01:31:26 +0000 (01:31 +0000)]
Use enum instead of unsigned. NFC.
The unsigned opcode argument here was the result of BinaryOperator->getOpcode().
That returns a BinaryOps enum which is more accurate than passing around an
unsigned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242265
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 01:31:23 +0000 (01:31 +0000)]
Use cast<> instead of dyn_cast to remove llvm_unreachable. NFC.
This code was checking if we are an ICmpInst or FCmpInst then throwing
unreachable if we are neither. We must be one or the other, so use a
cast on the FCmpInst case to ensure that we are that case. Then we can
avoid having an unreachable but still catch an error if we ever had another
subclass of CmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242264
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 01:31:20 +0000 (01:31 +0000)]
Use another foreach loop. NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242263
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 00:43:57 +0000 (00:43 +0000)]
Use getAnyExtOrTrunc helper instead of manually doing ext/trunc check. NFC.
The code here was doing exactly what is already in getAnyExtOrTrunc().
Just use that method instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242261
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 00:43:54 +0000 (00:43 +0000)]
Use getZExtOrTrunc helper instead of manually doing zext/trunc check. NFC.
The code here was doing exactly what is already in getZExtOrTrunc().
Just use that method instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242260
91177308-0d34-0410-b5e6-
96231b3b80d8
Michael Zolotukhin [Wed, 15 Jul 2015 00:19:51 +0000 (00:19 +0000)]
[LoopUnrolling] Handle cast instructions.
During estimation of unrolling effect we should be able to propagate
constants through casts.
Differential Revision: http://reviews.llvm.org/D10207
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242257
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 00:07:57 +0000 (00:07 +0000)]
Change conditional to assert. NFC.
This code was breaking from the case statement if the getStoreSizeInBits()
value was not a multiple of 0. Given that the implementation returns
getStoreSize() * 8, it can only be a multiple of 8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242255
91177308-0d34-0410-b5e6-
96231b3b80d8
Pete Cooper [Wed, 15 Jul 2015 00:07:55 +0000 (00:07 +0000)]
Use getStoreSize() instead of getStoreSizeInBits()/8. NFC.
The calls here were both to getStoreSizeInBits() which multiplies by 8.
We then immediately divided by 8. Calling getStoreSize() returns the
values we need without the extra arithmetic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242254
91177308-0d34-0410-b5e6-
96231b3b80d8