firefly-linux-kernel-4.4.55.git
16 years agomemcg: clean up checking of the disabled flag
Li Zefan [Fri, 25 Jul 2008 08:47:18 +0000 (01:47 -0700)]
memcg: clean up checking of the disabled flag

Those checks are unnecessary, because when the subsystem is disabled
it can't be mounted, so those functions won't get called.

The check is needed in functions which will be called in other places
except cgroup.

[hugh@veritas.com: further checking of disabled flag]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: remove a redundant check
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:17 +0000 (01:47 -0700)]
memcg: remove a redundant check

Because of remove refcnt patch, it's very rare case to that
mem_cgroup_charge_common() is called against a page which is accounted.

mem_cgroup_charge_common() is called when.
 1. a page is added into file cache.
 2. an anon page is _newly_ mapped.

A racy case is that a newly-swapped-in anonymous page is referred from
prural threads in do_swap_page() at the same time.
(a page is not Locked when mem_cgroup_charge() is called from do_swap_page.)

Another case is shmem. It charges its page before calling add_to_page_cache().
Then, mem_cgroup_charge_cache() is called twice. This case is handled in
mem_cgroup_cache_charge(). But this check may be too hacky...

Signed-off-by : KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: add hints for branch
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:16 +0000 (01:47 -0700)]
memcg: add hints for branch

Showing brach direction for obvious conditions.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: helper function for relcaim from shmem.
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:15 +0000 (01:47 -0700)]
memcg: helper function for relcaim from shmem.

A new call, mem_cgroup_shrink_usage() is added for shmem handling and
relacing non-standard usage of mem_cgroup_charge/uncharge.

Now, shmem calls mem_cgroup_charge() just for reclaim some pages from
mem_cgroup.  In general, shmem is used by some process group and not for
global resource (like file caches).  So, it's reasonable to reclaim pages
from mem_cgroup where shmem is mainly used.

[hugh@veritas.com: shmem_getpage release page sooner]
[hugh@veritas.com: mem_cgroup_shrink_usage css_put]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: remove refcnt from page_cgroup
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:14 +0000 (01:47 -0700)]
memcg: remove refcnt from page_cgroup

memcg: performance improvements

Patch Description
 1/5 ... remove refcnt fron page_cgroup patch (shmem handling is fixed)
 2/5 ... swapcache handling patch
 3/5 ... add helper function for shmem's memory reclaim patch
 4/5 ... optimize by likely/unlikely ppatch
 5/5 ... remove redundunt check patch (shmem handling is fixed.)

Unix bench result.

== 2.6.26-rc2-mm1 + memory resource controller
Execl Throughput                           2915.4 lps   (29.6 secs, 3 samples)
C Compiler Throughput                      1019.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5796.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1097.7 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               565.3 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1022128.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   544057.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    346481.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      319325.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     148788.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks       99051.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2058917.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1606109.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    854789.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         126145.2 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     2915.4      678.0
File Copy 1024 bufsize 2000 maxblocks         3960.0   346481.0      875.0
File Copy 256 bufsize 500 maxblocks           1655.0    99051.0      598.5
File Copy 4096 bufsize 8000 maxblocks         5800.0   854789.0     1473.8
Shell Scripts (8 concurrent)                     6.0     1097.7     1829.5
                                                                 =========
     FINAL SCORE                                                     991.3

== 2.6.26-rc2-mm1 + this set ==
Execl Throughput                           3012.9 lps   (29.9 secs, 3 samples)
C Compiler Throughput                       981.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (1 concurrent)               5872.0 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)               1120.3 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               578.0 lpm   (60.0 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    1003993.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks   550452.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks    347159.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks      314644.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks     151852.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks      101000.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    2033256.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks   1611814.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks    847979.0 KBps  (30.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places         128148.7 lpm   (30.0 secs, 3 samples)

                     INDEX VALUES
TEST                                        BASELINE     RESULT      INDEX

Execl Throughput                                43.0     3012.9      700.7
File Copy 1024 bufsize 2000 maxblocks         3960.0   347159.0      876.7
File Copy 256 bufsize 500 maxblocks           1655.0   101000.0      610.3
File Copy 4096 bufsize 8000 maxblocks         5800.0   847979.0     1462.0
Shell Scripts (8 concurrent)                     6.0     1120.3     1867.2
                                                                 =========
     FINAL SCORE                                                    1004.6

This patch:

Remove refcnt from page_cgroup().

After this,

 * A page is charged only when !page_mapped() && no page_cgroup is assigned.
* Anon page is newly mapped.
* File page is added to mapping->tree.

 * A page is uncharged only when
* Anon page is fully unmapped.
* File page is removed from LRU.

There is no change in behavior from user's view.

This patch also removes unnecessary calls in rmap.c which was used only for
refcnt mangement.

[akpm@linux-foundation.org: fix warning]
[hugh@veritas.com: fix shmem_unuse_inode charging]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: better migration handling
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:10 +0000 (01:47 -0700)]
memcg: better migration handling

This patch changes page migration under memory controller to use a
different algorithm.  (thanks to Christoph for new idea.)

Before:
 - page_cgroup is migrated from an old page to a new page.
After:
 - a new page is accounted , no reuse of page_cgroup.

Pros:

 - We can avoid compliated lock depndencies and races in migration.

Cons:

 - new param to mem_cgroup_charge_common().

 - mem_cgroup_getref() is added for handling ref_cnt ping-pong.

This version simplifies complicated lock dependency in page migraiton
under memory resource controller.

  new refcnt sequence is following.

a mapped page:
  prepage_migration() ..... +1 to NEW page
  try_to_unmap()      ..... all refs to OLD page is gone.
  move_pages()        ..... +1 to NEW page if page cache.
  remap...            ..... all refs from *map* is added to NEW one.
  end_migration()     ..... -1 to New page.

  page's mapcount + (page_is_cache) refs are added to NEW one.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: avoid unnecessary initialization
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:09 +0000 (01:47 -0700)]
memcg: avoid unnecessary initialization

* remove over-killing initialization (in fast path)
* makeing the condition for PAGE_CGROUP_FLAG_ACTIVE be more obvious.

Signed-off-by: KAMEAZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomemcg: make global var read_mostly
KAMEZAWA Hiroyuki [Fri, 25 Jul 2008 08:47:08 +0000 (01:47 -0700)]
memcg: make global var read_mostly

mem_cgroup_subsys and page_cgroup_cache should be read_mostly and
MEM_CGROUP_RECLAIM_RETRIES can be just a fixed number.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevcgroup: code cleanup
Li Zefan [Fri, 25 Jul 2008 08:47:08 +0000 (01:47 -0700)]
devcgroup: code cleanup

- clean up set_majmin()
- use simple_strtoul() to parse major/minor

[akpm@linux-foundation.org: fix simple_strtoul() usage]
[kosaki.motohiro@jp.fujitsu.com: fix warnings]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodevcgroup: relax white-list protection down to RCU
Pavel Emelyanov [Fri, 25 Jul 2008 08:47:07 +0000 (01:47 -0700)]
devcgroup: relax white-list protection down to RCU

Currently this list is protected with a simple spinlock, even for reading
from one.  This is OK, but can be better.

Actually I want it to be better very much, since after replacing the
OpenVZ device permissions engine with the cgroup-based one I noticed, that
we set 12 default device permissions for each newly created container (for
/dev/null, full, terminals, ect devices), and people sometimes have up to
20 perms more, so traversing the ~30-40 elements list under a spinlock
doesn't seem very good.

Here's the RCU protection for white-list - dev_whitelist_item-s are added
and removed under the devcg->lock, but are looked up in permissions
checking under the rcu_read_lock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup_clone: use pid of newly created task for new cgroup
Serge E. Hallyn [Fri, 25 Jul 2008 08:47:06 +0000 (01:47 -0700)]
cgroup_clone: use pid of newly created task for new cgroup

cgroup_clone creates a new cgroup with the pid of the task.  This works
correctly for unshare, but for clone cgroup_clone is called from
copy_namespaces inside copy_process, which happens before the new pid is
created.  As a result, the new cgroup was created with current's pid.
This patch:

1. Moves the call inside copy_process to after the new pid
   is created
2. Passes the struct pid into ns_cgroup_clone (as it is not
   yet attached to the task)
3. Passes a name from ns_cgroup_clone() into cgroup_clone()
   so as to keep cgroup_clone() itself simpler
4. Uses pid_vnr() to get the process id value, so that the
   pid used to name the new cgroup is always the pid as it
   would be known to the task which did the cloning or
   unsharing.  I think that is the most intuitive thing to
   do.  This way, task t1 does clone(CLONE_NEWPID) to get
   t2, which does clone(CLONE_NEWPID) to get t3, then the
   cgroup for t3 will be named for the pid by which t2 knows
   t3.

(Thanks to Dan Smith for finding the main bug)

Changelog:
June 11: Incorporate Paul Menage's feedback:  don't pass
         NULL to ns_cgroup_clone from unshare, and reduce
 patch size by using 'nodename' in cgroup_clone.
June 10: Original version

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge Hallyn <serge@us.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Tested-by: Dan Smith <danms@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: convert res_counter_write() to be a cgroups write_string() handler
Paul Menage [Fri, 25 Jul 2008 08:47:04 +0000 (01:47 -0700)]
cgroup files: convert res_counter_write() to be a cgroups write_string() handler

Currently res_counter_write() is a raw file handler even though it's
ultimately taking a number, since in some cases it wants to
pre-process the string when converting it to a number.

This patch converts res_counter_write() from a raw file handler to a
write_string() handler; this allows some of the boilerplate
copying/locking/checking to be removed, and simplies the cleanup path,
since these functions are now performed by the cgroups framework.

[lizf@cn.fujitsu.com: build fix]
Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: convert devcgroup_access_write() into a cgroup write_string() handler
Paul Menage [Fri, 25 Jul 2008 08:47:03 +0000 (01:47 -0700)]
cgroup files: convert devcgroup_access_write() into a cgroup write_string() handler

This patch converts devcgroup_access_write() from a raw file handler
into a handler for the cgroup write_string() method. This allows some
boilerplate copying/locking/checking to be removed and simplifies the
cleanup path, since these functions are performed by the cgroups
framework before calling the handler.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: remove cpuset_common_file_write()
Paul Menage [Fri, 25 Jul 2008 08:47:02 +0000 (01:47 -0700)]
cgroup files: remove cpuset_common_file_write()

This patch tweaks the signatures of the update_cpumask() and
update_nodemask() functions so that they can be called directly as
handlers for the new cgroups write_string() method.

This allows cpuset_common_file_write() to be removed.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: turn attach_task_by_pid directly into a cgroup write handler
Paul Menage [Fri, 25 Jul 2008 08:47:01 +0000 (01:47 -0700)]
cgroup files: turn attach_task_by_pid directly into a cgroup write handler

This patch changes attach_task_by_pid() to take a u64 rather than a
string; as a result it can be called directly as a control groups
write_u64 handler, and cgroup_common_file_write() can be removed.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: move notify_on_release file to separate write handler
Paul Menage [Fri, 25 Jul 2008 08:47:01 +0000 (01:47 -0700)]
cgroup files: move notify_on_release file to separate write handler

This patch moves the write handler for the cgroups notify_on_release
file into a separate handler. This handler requires no cgroups locking
since it relies on atomic bitops for synchronization.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroups: misc cleanups to write_string patchset
Paul Menage [Fri, 25 Jul 2008 08:47:00 +0000 (01:47 -0700)]
cgroups: misc cleanups to write_string patchset

This patch contains cleanups suggested by reviewers for the recent
write_string() patchset:

- pair cgroup_lock_live_group() with cgroup_unlock() in cgroup.c for
  clarity, rather than directly unlocking cgroup_mutex.

- make the return type of cgroup_lock_live_group() a bool

- use a #define'd constant for the local buffer size in read/write functions

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: move the release_agent file to use typed handlers
Paul Menage [Fri, 25 Jul 2008 08:46:59 +0000 (01:46 -0700)]
cgroup files: move the release_agent file to use typed handlers

Adds cgroup_release_agent_write() and cgroup_release_agent_show()
methods to handle writing/reading the path to a cgroup hierarchy's
release agent. As a result, cgroup_common_file_read() is now unnecessary.

As part of the change, a previously-tolerated race in
cgroup_release_agent() is avoided by copying the current
release_agent_path prior to calling call_usermode_helper().

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: add write_string cgroup control file method
Paul Menage [Fri, 25 Jul 2008 08:46:58 +0000 (01:46 -0700)]
cgroup files: add write_string cgroup control file method

This patch adds a write_string() method for cgroups control files. The
semantics are that a buffer is copied from userspace to kernelspace
and the handler function invoked on that buffer.  The buffer is
guaranteed to be nul-terminated, and no longer than max_write_len
(defaulting to 64 bytes if unspecified). Later patches will convert
existing raw file write handlers in control group subsystems to use
this method.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup files: clean up whitespace in struct cftype
Paul Menage [Fri, 25 Jul 2008 08:46:57 +0000 (01:46 -0700)]
cgroup files: clean up whitespace in struct cftype

This patch removes some extraneous spaces from method declarations in
struct cftype, to fit in with conventional kernel style.

Signed-off-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroups: annotate two variables with __read_mostly
Li Zefan [Fri, 25 Jul 2008 08:46:56 +0000 (01:46 -0700)]
cgroups: annotate two variables with __read_mostly

- need_forkexit_callback will be read only after system boot.
- use_task_css_set_links will be read only after it's set.

And these 2 variables are checked when a new process is forked.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup: list_for_each cleanup
KOSAKI Motohiro [Fri, 25 Jul 2008 08:46:55 +0000 (01:46 -0700)]
cgroup: list_for_each cleanup

--------------------------
while() {
list_entry();
...
}
--------------------------

is equivalent to following code.

--------------------------
list_for_each_entry(){
...
}
--------------------------

later can review easily more.

this patch is just clean up.
it doesn't have any behavor change.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMark res_counter_charge(_locked) with __must_check
Pavel Emelyanov [Fri, 25 Jul 2008 08:46:55 +0000 (01:46 -0700)]
Mark res_counter_charge(_locked) with __must_check

Ignoring their return values may result in counter underflow in the future -
when the value charged will be uncharged (or in "leaks" - when the value is
not uncharged).

This also prevents from using charging routines to decrement the
counter value (i.e. uncharge it) ;)

(Current code works OK with res_counter, however :) )

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocgroup: use read lock to guard find_existing_css_set()
Li Zefan [Fri, 25 Jul 2008 08:46:54 +0000 (01:46 -0700)]
cgroup: use read lock to guard find_existing_css_set()

The function does not modify anything (except the temporary css template), so
it's sufficient to hold read lock.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoprocfs-guide: drop pointless &nbsp; entities
Mike Frysinger [Fri, 25 Jul 2008 08:46:53 +0000 (01:46 -0700)]
procfs-guide: drop pointless &nbsp; entities

Having trailing &nbsp; entities in a revision numer seems pretty pointless
to me.  More so, it's causing me pains, so just drop them since no other
guide is doing this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: implement sending information via netlink about user below quota
Jan Kara [Fri, 25 Jul 2008 08:46:52 +0000 (01:46 -0700)]
quota: implement sending information via netlink about user below quota

Sometimes it may be useful for userspace to know (e.g.  for some hosting
guys) that some user stopped exceeding his hardlimit or softlimit in
quotas.  Implement sending of such events to userspace via quota netlink
protocol so that they don't have to poll for such events.  Based on idea
and initial implementation by Vladislav Bogdanov.

Cc: Vladislav Bogdanov <slava@nsys.by>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: convert macros to inline functions
Jan Kara [Fri, 25 Jul 2008 08:46:52 +0000 (01:46 -0700)]
quota: convert macros to inline functions

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: move function-macros from quota.h to quotaops.h
Jan Kara [Fri, 25 Jul 2008 08:46:51 +0000 (01:46 -0700)]
quota: move function-macros from quota.h to quotaops.h

Move declarations of some macros, which should be in fact functions to
quotaops.h.  This way they can be later converted to inline functions
because we can now use declarations from quota.h.  Also add necessary
includes of quotaops.h to a few files.

[akpm@linux-foundation.org: fix JFS build]
[akpm@linux-foundation.org: fix UFS build]
[vegard.nossum@gmail.com: fix QUOTA=n build]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Arjen Pool <arjenpool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: cleanup loop in sync_dquots()
Jan Kara [Fri, 25 Jul 2008 08:46:50 +0000 (01:46 -0700)]
quota: cleanup loop in sync_dquots()

Make loop in sync_dquots() checking whether there's something to write
more readable, remove useless variable and macro info_any_dirty() which
is used only in this place.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: "Vegard Nossum" <vegard.nossum@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: rename quota functions from upper case, make bigger ones non-inline
Jan Kara [Fri, 25 Jul 2008 08:46:50 +0000 (01:46 -0700)]
quota: rename quota functions from upper case, make bigger ones non-inline

Cleanup quotaops.h: Rename functions from uppercase to lowercase (and
define backward compatibility macros), move larger functions to dquot.c
and make them non-inline.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquota: fix possible infinite loop in quota code
Jan Kara [Fri, 25 Jul 2008 08:46:49 +0000 (01:46 -0700)]
quota: fix possible infinite loop in quota code

When quota structure is going to be dropped and it is dirty, quota code tries
to write it.  If the write fails for some reason (e.  g.  transaction cannot
be started because the journal is aborted), we try writing again and again and
again...  Fix the problem by clearing the dirty bit even if the write failed.

(akpm: for 2.6.27, 2.6.26.x and 2.6.25.x)

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: dingdinghua <dingdinghua85@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoUTC timestamp option for FAT filesystems fix
Joe Peterson [Fri, 25 Jul 2008 08:46:48 +0000 (01:46 -0700)]
UTC timestamp option for FAT filesystems fix

Signed-off-by: Joe Peterson <joe@skyrush.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofatfs: add UTC timestamp option
Joe Peterson [Fri, 25 Jul 2008 08:46:47 +0000 (01:46 -0700)]
fatfs: add UTC timestamp option

Provide a new mount option ("tz=UTC") for DOS (vfat/msdos) filesystems,
allowing timestamps to be in coordinated universal time (UTC) rather than
local time in applications where doing this is advantageous.

In particular, portable devices that use fat/vfat (such as digital
cameras) can benefit from using UTC in their internal clocks, thus
avoiding daylight saving time errors and general time ambiguity issues.
The user of the device does not have to worry about changing the time when
moving from place or when daylight saving changes.

The new mount option, when set, disables the counter-adjustment that Linux
currently makes to FAT timestamp info in anticipation of the normal
userspace time zone correction.  When used in this new mode, all daylight
saving time and time zone handling is done in userspace as is normal for
many other filesystems (like ext3).  The default mode, which remains
unchanged, is still appropriate when mounting volumes written in Windows
(because of its use of local time).

I originally based this patch on one submitted last year by Paul Collins,
but I updated it to work with current source and changed variable/option
naming.  Ogawa Hirofumi (who maintains these filesystems) and I discussed
this patch at length on lkml, and he suggested using the option name in
the attached version of the patch.  Barry Bouwsma pointed out a good
addition to the patch as well.

Signed-off-by: Joe Peterson <joe@skyrush.com>
Signed-off-by: Paul Collins <paul@ondioline.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Barry Bouwsma <free_beer_for_all@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoremove unused #include <linux/dirent.h>'s
Adrian Bunk [Fri, 25 Jul 2008 08:46:46 +0000 (01:46 -0700)]
remove unused #include <linux/dirent.h>'s

Remove some unused #include <linux/dirent.h>'s.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoremove the in-kernel struct dirent{,64}
Adrian Bunk [Fri, 25 Jul 2008 08:46:46 +0000 (01:46 -0700)]
remove the in-kernel struct dirent{,64}

The kernel struct dirent{,64} were different from the ones in
userspace.

Even worse, we exported the kernel ones to userspace.

But after the fat usages are fixed we can remove the conflicting
kernel versions.

Reviewed-by: H. Peter Anvin <hpa@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomsdos fs: remove unsettable atari option
Rene Scharfe [Fri, 25 Jul 2008 08:46:45 +0000 (01:46 -0700)]
msdos fs: remove unsettable atari option

It has been impossible to set the option 'atari' of the MSDOS filesystem
for several years.  Since nobody seems to have missed it, let's remove its
remains.

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: small optimization to __fat_readdir()
OGAWA Hirofumi [Fri, 25 Jul 2008 08:46:44 +0000 (01:46 -0700)]
fat: small optimization to __fat_readdir()

This removes unnecessary parsing for directory entries.

If short_only, we don't need to parse longname.  And if !both and it found
the longname, we don't need shortname.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: use same logic in fat_search_long() and __fat_readdir()
OGAWA Hirofumi [Fri, 25 Jul 2008 08:46:44 +0000 (01:46 -0700)]
fat: use same logic in fat_search_long() and __fat_readdir()

This uses uses stack for shortname, and uses __getname() for longname in
fat_search_long() and __fat_readdir().  By this, it removes unneeded
__getname() for shortname.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: cleanup fs/fat/dir.c
OGAWA Hirofumi [Fri, 25 Jul 2008 08:46:43 +0000 (01:46 -0700)]
fat: cleanup fs/fat/dir.c

This is no logic changes, just cleans fs/fat/dir.c up.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat/dir.c: switch to struct __fat_dirent
Adrian Bunk [Fri, 25 Jul 2008 08:46:43 +0000 (01:46 -0700)]
fat/dir.c: switch to struct __fat_dirent

struct __fat_dirent is what was formerly the kernel struct dirent (that
was different from the userspace struct dirent).

Converting all fat users to struct __fat_dirent will allow us to get rid
of the conflicting struct dirent definition.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: fix VFAT_IOCTL_READDIR_xxx and cleanup for userland
OGAWA Hirofumi [Fri, 25 Jul 2008 08:46:42 +0000 (01:46 -0700)]
fat: fix VFAT_IOCTL_READDIR_xxx and cleanup for userland

"struct dirent" is a kernel type here, but is a **different type** in
userspace!  This means both the structure and the IOCTL number is wrong!

So, this adds new "struct __fat_dirent" to generate correct IOCTL number.
And kernel stuff moves to under __KERNEL__.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofat: fix parse_options()
OGAWA Hirofumi [Fri, 25 Jul 2008 08:46:41 +0000 (01:46 -0700)]
fat: fix parse_options()

Current parse_options() exits too early.  We need to run the code of
bottom in this function even if users doesn't specify options.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: remove double definitions of xattr macros
Shen Feng [Fri, 25 Jul 2008 08:46:41 +0000 (01:46 -0700)]
reiserfs: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_SECURITY_PREFIX
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: convert j_commit_lock to mutex
Jeff Mahoney [Fri, 25 Jul 2008 08:46:40 +0000 (01:46 -0700)]
reiserfs: convert j_commit_lock to mutex

j_commit_lock is a semaphore but uses it as if it were a mutex.  This patch
converts it to a mutex.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: convert j_flush_sem to mutex
Jeff Mahoney [Fri, 25 Jul 2008 08:46:39 +0000 (01:46 -0700)]
reiserfs: convert j_flush_sem to mutex

j_flush_sem is a semaphore but uses it as if it were a mutex.  This patch
converts it to a mutex.

[akpm@linux-foundation.org: fix mutex_trylock retval treatment]
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: convert j_lock to mutex
Jeff Mahoney [Fri, 25 Jul 2008 08:46:38 +0000 (01:46 -0700)]
reiserfs: convert j_lock to mutex

j_lock is a semaphore but uses it as if it were a mutex.  This patch converts
it to a mutex.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: correct mount option parsing to detect when quota options can be changed
Jan Kara [Fri, 25 Jul 2008 08:46:38 +0000 (01:46 -0700)]
reiserfs: correct mount option parsing to detect when quota options can be changed

We should not allow user to change quota mount options when quota is just
suspended.  It would make mount options and internal quota state inconsistent.

Also we should not allow user to change quota format when quota is turned on.
On the other hand we can just silently ignore when some option is set to the
value it already has (some mount versions do this on remount).  Finally, we
should not discard current quota options if parsing of mount options fails.

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: fix typos in messages and comments (journalled -> journaled)
Jan Kara [Fri, 25 Jul 2008 08:46:37 +0000 (01:46 -0700)]
reiserfs: fix typos in messages and comments (journalled -> journaled)

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreiserfs: fix synchronization of quota files in journal=data mode
Jan Kara [Fri, 25 Jul 2008 08:46:36 +0000 (01:46 -0700)]
reiserfs: fix synchronization of quota files in journal=data mode

In journal=data mode, it is not enough to do write_inode_now() as done in
vfs_quota_on() to write all data to their final location (which is needed for
quota_read to work correctly).  Calling journal_end_sync() before calling
vfs_quota_on() does it's job because transactions are committed to the journal
and data marked as dirty in memory so write_inode_now() writes them to their
final locations.

Cc: <reiserfs-devel@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohfsplus: convert the extents_lock in a mutex
Matthias Kaehlcke [Fri, 25 Jul 2008 08:46:36 +0000 (01:46 -0700)]
hfsplus: convert the extents_lock in a mutex

Apple Extended HFS file system: The semaphore extents lock is used as a
mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohfs: convert extents_lock in a mutex
Matthias Kaehlcke [Fri, 25 Jul 2008 08:46:35 +0000 (01:46 -0700)]
hfs: convert extents_lock in a mutex

Apple Macintosh file system: The semaphore extens_lock is used as a mutex.
Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agohfs: convert bitmap_lock in a mutex
Matthias Kaehlcke [Fri, 25 Jul 2008 08:46:34 +0000 (01:46 -0700)]
hfs: convert bitmap_lock in a mutex

Apple Macintosh file system: The semaphore bitmap_lock is used as a mutex.
Convert it to the mutex API

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocoda: remove CODA_FS_OLD_API
Adrian Bunk [Fri, 25 Jul 2008 08:46:34 +0000 (01:46 -0700)]
coda: remove CODA_FS_OLD_API

While fixing CONFIG_ leakages to the userspace kernel headers I ran into
CODA_FS_OLD_API.

After five years, are there still people using the old API left?
Especially considering that you have to choose at compile time which API
to support in the kernel (and distributions tend to offer the new API for
some time).

Jan: "The old API can definitely go.  Around the time the new
      interface went in there were some non-Coda userspace file system
      implementations that took a while longer to convert to the new API,
      but by now they all switched to the new interface or in some cases
      to a FUSE-based solution."

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoisofs: fix minor filesystem corruption
Adam Greenblatt [Fri, 25 Jul 2008 08:46:32 +0000 (01:46 -0700)]
isofs: fix minor filesystem corruption

Some iso9660 images contain files with rockridge data that is either
incorrect or incompletely parsed.  Prior to commit
f2966632a134e865db3c819346a1dc7d96e05309 ("[PATCH] rock: handle directory
overflows") (included with kernel 2.6.13) the kernel ignored the rockridge
data for these files, while still allowing the files to be accessed under
their non-rockridge names.  That commit inadvertently changed things so
that files with invalid rockridge data could not be accessed at all.  (I
ran across the problem when comparing some old CDs with hard disk copies I
had made long ago under kernel 2.4: a few of the files on the hard disk
copies were no longer visible on the CDs.)

This change reverts to the pre-2.6.13 behavior.

Signed-off-by: Adam Greenblatt <adam.greenblatt@gmail.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: validate directory entry data before use
Duane Griffin [Fri, 25 Jul 2008 08:46:31 +0000 (01:46 -0700)]
ext3: validate directory entry data before use

ext3_dx_find_entry uses ext3_next_entry without verifying that the entry
is valid.  If its rec_len == 0 this causes an infinite loop.  Refactor the
loop to check the validity of entries before checking whether they match
and moving onto the next one.

There are other uses of ext3_next_entry in this file which also look
problematic.  They should be reviewed and fixed if/when we have a
test-case that triggers them.

This patch fixes the first case (image hdb.25.softlockup.gz) reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: don't abort if flushing file data failed
Hidehiro Kawai [Fri, 25 Jul 2008 08:46:30 +0000 (01:46 -0700)]
jbd: don't abort if flushing file data failed

In ordered mode, the current jbd aborts the journal if a file data buffer
has an error.  But this behavior is unintended, and we found that it has
been adopted accidentally.

This patch undoes it and just calls printk() instead of aborting the
journal.  Additionally, set AS_EIO into the address_space object of the
failed buffer which is submitted by journal_do_submit_data() so that
fsync() can get -EIO.

Missing error checkings are also added to inform errors on file data
buffers to the user.  The following buffers are targeted.

  (a) the buffer which has already been written out by pdflush
  (b) the buffer which has been unlocked before scanned in the
      t_locked_list loop

[akpm@linux-foundation.org: improve grammar in a printk]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: kill 2 useless magic numbers
Li Zefan [Fri, 25 Jul 2008 08:46:29 +0000 (01:46 -0700)]
ext3: kill 2 useless magic numbers

dx_root_limit() will never return 20, and I can't figure out what 20
stands for.  This function has never changed since htree directory
indexing was merged.

Similar for dx_node_limit() and the magic 22.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: positively dispose the unmapped data buffers in journal_commit_transaction()
Toshiyuki Okajima [Fri, 25 Jul 2008 08:46:29 +0000 (01:46 -0700)]
jbd: positively dispose the unmapped data buffers in journal_commit_transaction()

After ext3-ordered files are truncated, there is a possibility that the
pages which cannot be estimated still remain.  Remaining pages can be
released when the system has really few memory.  So, it is not memory
leakage.  But the resource management software etc.  may not work
correctly.

It is possible that journal_unmap_buffer() cannot release the buffers, and
the pages to which they belong because they are attached to a commiting
transaction and journal_unmap_buffer() cannot release them.  To release
such the buffers and the pages later, journal_unmap_buffer() leaves it to
journal_commit_transaction().  (journal_unmap_buffer() puts the mark
'BH_Freed' to the buffers so that journal_commit_transaction() can
identify whether they can be released or not.)

In the journalled mode and the writeback mode, jbd does with only metadata
buffers.  But in the ordered mode, jbd does with metadata buffers and also
data buffers.

Actually, journal_commit_transaction() releases only the metadata buffers
of which release is demanded by journal_unmap_buffer(), and also releases
the pages to which they belong if possible.

As a result, the data buffers of which release is demanded by
journal_unmap_buffer() remain after a transaction commits.  And also the
pages to which they belong remain.

Such the remained pages don't have mapping any longer.  Due to this fact,
there is a possibility that the pages which cannot be estimated remain.

The metadata buffers marked 'BH_Freed' and the pages to which
they belong can be released at 'JBD: commit phase 7'.

Therefore, by applying the same code into 'JBD: commit phase 2' (where the
data buffers are done with), journal_commit_transaction() can also release
the data buffers marked 'BH_Freed' and the pages to which they belong.

As a result, all the buffers marked 'BH_Freed' can be released, and also
all the pages to which these buffers belong can be released at
journal_commit_transaction().  So, the page which cannot be estimated is
lost.

<<Excerpt of code at 'JBD: commit phase 7'>>
 >         spin_lock(&journal->j_list_lock);
 >         while (commit_transaction->t_forget) {
 >                 transaction_t *cp_transaction;
 >                 struct buffer_head *bh;
 >
 >                 jh = commit_transaction->t_forget;
 >...
 >                 if (buffer_freed(bh)) {
 >                 ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         clear_buffer_freed(bh);
 >                        ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         clear_buffer_jbddirty(bh);
 >                 }
 >
 >                 if (buffer_jbddirty(bh)) {
 >                         JBUFFER_TRACE(jh, "add to new checkpointing trans");
 >                         __journal_insert_checkpoint(jh, commit_transaction);
 >                         JBUFFER_TRACE(jh, "refile for checkpoint writeback");
 >                         __journal_refile_buffer(jh);
 >                         jbd_unlock_bh_state(bh);
 >                 } else {
 >                         J_ASSERT_BH(bh, !buffer_dirty(bh));
 > ...
 >                         JBUFFER_TRACE(jh, "refile or unfile freed buffer");
 >                         __journal_refile_buffer(jh);
 >                         if (!jh->b_transaction) {
 >                                 jbd_unlock_bh_state(bh);
 >                                  /* needs a brelse */
 >                                 journal_remove_journal_head(bh);
 >                                 release_buffer_page(bh);
 >                                 ^^^^^^^^^^^^^^^^^^^^^^^^
 >                         } else
 >                 }
****************************************************************
* Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' *
****************************************************************

At journal_commit_transaction() code, there is one extra message in the
series of jbd debug messages.  ("JBD: commit phase 2") This patch fixes
it, too.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: unexport journal_update_superblock
Adrian Bunk [Fri, 25 Jul 2008 08:46:26 +0000 (01:46 -0700)]
jbd: unexport journal_update_superblock

Remove the unused EXPORT_SYMBOL(journal_update_superblock).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: handle deleting corrupted indirect blocks
Duane Griffin [Fri, 25 Jul 2008 08:46:26 +0000 (01:46 -0700)]
ext3: handle deleting corrupted indirect blocks

While freeing indirect blocks we attach a journal head to the parent
buffer head, free the blocks, then journal the parent.  If the indirect
block list is corrupted and points to the parent the journal head will be
detached when the block is cleared, causing an OOPS.

Check for that explicitly and handle it gracefully.

This patch fixes the third case (image hdb.20000057.nullderef.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Immediately above the change, in the ext3_free_data function, we call
ext3_clear_blocks to clear the indirect blocks in this parent block.  If
one of those blocks happens to actually be the parent block it will clear
b_private / BH_JBD.

I did the check at the end rather than earlier as it seemed more elegant.
I don't think there should be much practical difference, although it is
possible the FS may not be quite so badly corrupted if we did it the other
way (and didn't clear the block at all).  To be honest, I'm not convinced
there aren't other similar failure modes lurking in this code, although I
couldn't find any with a quick review.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: don't read inode block if the buffer has a write error
Hidehiro Kawai [Fri, 25 Jul 2008 08:46:24 +0000 (01:46 -0700)]
ext3: don't read inode block if the buffer has a write error

A transient I/O error can corrupt inode data.  Here is the scenario:

(1) update inode_A at the block_B
(2) pdflush writes out new inode_A to the filesystem, but it results
    in write I/O error, at this point, BH_Uptodate flag of the buffer
    for block_B is cleared and BH_Write_EIO is set
(3) create new inode_C which located at block_B, and
    __ext3_get_inode_loc() tries to read on-disk block_B because the
    buffer is not uptodate
(4) if it can read on-disk block_B successfully, inode_A is
    overwritten by old data

This patch makes __ext3_get_inode_loc() not read the inode block if the
buffer has BH_Write_EIO flag.  In this case, the buffer should have the
latest information, so setting the uptodate flag to the buffer (this
avoids WARN_ON_ONCE() in mark_buffer_dirty().)

According to this change, we would need to test BH_Write_EIO flag for the
error checking.  Currently nobody checks write I/O errors on metadata
buffers, but it will be done in other patches I'm working on.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: sugita <yumiko.sugita.yf@hitachi.com>
Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: handle corrupted orphan list at mount
Duane Griffin [Fri, 25 Jul 2008 08:46:23 +0000 (01:46 -0700)]
ext3: handle corrupted orphan list at mount

If the orphan node list includes valid, untruncatable nodes with nlink > 0
the ext3_orphan_cleanup loop which attempts to delete them will not do so,
causing it to loop forever. Fix by checking for such nodes in the
ext3_orphan_get function.

This patch fixes the second case (image hdb.20000009.softlockup.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: printk warning fix]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: remove double definitions of xattr macros
Shen Feng [Fri, 25 Jul 2008 08:46:23 +0000 (01:46 -0700)]
ext3: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: fix race between free buffer and commit transaction
Mingming Cao [Fri, 25 Jul 2008 08:46:22 +0000 (01:46 -0700)]
jbd: fix race between free buffer and commit transaction

journal_try_to_free_buffers() could race with jbd commit transaction when
the later is holding the buffer reference while waiting for the data
buffer to flush to disk.  If the caller of journal_try_to_free_buffers()
request tries hard to release the buffers, it will treat the failure as
error and return back to the caller.  We have seen the directo IO failed
due to this race.  Some of the caller of releasepage() also expecting the
buffer to be dropped when passed with GFP_KERNEL mask to the
releasepage()->journal_try_to_free_buffers().

With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to
indicating this call could wait, in case of try_to_free_buffers() failed,
let's waiting for journal_commit_transaction() to finish commit the
current committing transaction, then try to free those buffers again.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: improve some code in rb tree part of dir.c
Shen Feng [Fri, 25 Jul 2008 08:46:21 +0000 (01:46 -0700)]
ext3: improve some code in rb tree part of dir.c

- remove unnecessary code in free_rb_tree_fname
 - rename free_rb_tree_fname to ext3_htree_create_dir_info
   since it and ext3_htree_free_dir_info are a pair
 - replace kmalloc with kzalloc in ext3_htree_free_dir_info

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: tidy up revoke cache initialisation and destruction
Duane Griffin [Fri, 25 Jul 2008 08:46:21 +0000 (01:46 -0700)]
jbd: tidy up revoke cache initialisation and destruction

Make revocation cache destruction safe to call if initialisation fails
partially or entirely.  This allows it to be used to cleanup in the case
of initialisation failure, simplifying that code slightly.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: eliminate duplicated code in revocation table init/destroy functions
Duane Griffin [Fri, 25 Jul 2008 08:46:20 +0000 (01:46 -0700)]
jbd: eliminate duplicated code in revocation table init/destroy functions

The revocation table initialisation/destruction code is repeated for each
of the two revocation tables stored in the journal.  Refactoring the
duplicated code into functions is tidier, simplifies the logic in
initialisation in particular, and slightly reduces the code size.

There should not be any functional change.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agojbd: replace potentially false assertion with if block
Duane Griffin [Fri, 25 Jul 2008 08:46:19 +0000 (01:46 -0700)]
jbd: replace potentially false assertion with if block

If an error occurs during jbd cache initialisation it is possible for the
journal_head_cache to be NULL when journal_destroy_journal_head_cache is
called.  Replace the J_ASSERT with an if block to handle the situation
correctly.

Note that even with this fix things will break badly if jbd is statically
compiled in and cache initialisation fails.

Signed-off-by: Duane Griffin <duaneg@dghda.com
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: correct mount option parsing to detect when quota options can be changed
Jan Kara [Fri, 25 Jul 2008 08:46:18 +0000 (01:46 -0700)]
ext3: correct mount option parsing to detect when quota options can be changed

We should not allow user to change quota mount options when quota is just
suspended.  I would make mount options and internal quota state inconsistent.
Also we should not allow user to change quota format when quota is turned on.
On the other hand we can just silently ignore when some option is set to the
value it already has (mount does this on remount).

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix typos in messages and comments (journalled -> journaled)
Jan Kara [Fri, 25 Jul 2008 08:46:17 +0000 (01:46 -0700)]
ext3: fix typos in messages and comments (journalled -> journaled)

Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext3: fix synchronization of quota files in journal=data mode
Jan Kara [Fri, 25 Jul 2008 08:46:16 +0000 (01:46 -0700)]
ext3: fix synchronization of quota files in journal=data mode

In journal=data mode, it is not enough to do write_inode_now as done in
vfs_quota_on() to write all data to their final location (which is needed for
quota_read to work correctly).  Calling journal_flush() does its job.

Reported-by: Nick <gentuu@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: fix typo in Hurd part of include/linux/ext2_fs.h
Samuel Thibault [Fri, 25 Jul 2008 08:46:16 +0000 (01:46 -0700)]
ext2: fix typo in Hurd part of include/linux/ext2_fs.h

Fix typo in Hurd part of include/linux/ext2_fs.h

The ';' here is redundant or can even pose problem.  This is actually not
used by the Linux kernel, but it is exposed in GNU/Hurd.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoext2: remove double definitions of xattr macros
Shen Feng [Fri, 25 Jul 2008 08:46:15 +0000 (01:46 -0700)]
ext2: remove double definitions of xattr macros

remove the definitions of macros:
XATTR_TRUSTED_PREFIX
XATTR_USER_PREFIX
since they are defined in linux/xattr.h

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agominix: remove !NO_TRUNCATE code
Adrian Bunk [Fri, 25 Jul 2008 08:46:14 +0000 (01:46 -0700)]
minix: remove !NO_TRUNCATE code

This patch removes the !NO_TRUNCATE code that anyway required a manual
editing of the code for being used.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: max732x driver
Eric Miao [Fri, 25 Jul 2008 08:46:14 +0000 (01:46 -0700)]
gpio: max732x driver

This adds a driver supporting a family of I2C port expanders from Maxim,
which includes the MAX7319 and MAX7320-7327 chips.

[dbrownell@users.sourceforge.net: minor fixes]
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpiolib: allow user-selection
Michael Buesch [Fri, 25 Jul 2008 08:46:11 +0000 (01:46 -0700)]
gpiolib: allow user-selection

This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: add bt8xxgpio driver
Michael Buesch [Fri, 25 Jul 2008 08:46:10 +0000 (01:46 -0700)]
gpio: add bt8xxgpio driver

This adds the bt8xxgpio driver.  The purpose of the bt8xxgpio driver is to
export all of the 24 GPIO pins available on Brooktree 8xx chips to the
kernel GPIO infrastructure.

This makes it possible to use a physically modified BT8xx card as
cheap digital GPIO card.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: mcp23s08 handles multiple chips per chipselect
David Brownell [Fri, 25 Jul 2008 08:46:09 +0000 (01:46 -0700)]
gpio: mcp23s08 handles multiple chips per chipselect

Teach the mcp23s08 driver about a curious feature of these chips: up to
four of them can share the same chipselect, with the SPI signals wired in
parallel, by matching two bits in the first protocol byte against two
address lines on the chip.

This is handled by three software changes:

  * Platform data now holds an array of per-chip structs, not
    just one chip's address and pullup configuration.

  * Probe() and remove() now use another level of structure,
    wrapping an instance of the original structure for each
    mcp23s08 chip sharing that chipselect.

  * The HAEN bit is set, so that the hardware address bits can no
    longer be ignored (boot firmware may not have enabled them).

The "one struct per chip" preserves the guts of the current code,
but platform_data will need minor changes.

    OLD:
/* incorrect "slave" ID may not have mattered */
.slave = 3,
.pullups = BIT(3) | BIT(1) | BIT(0),

    NEW:
/* slave address _must_ match chip's wiring */
.chip[3] = {
.is_present = true,
.pullups = BIT(3) | BIT(1) | BIT(0),
},

There's no change in how things _behave_ for spi_device nodes with a
single mcp23s08 chip.  New multi-chip configurations assign GPIOs in
sequence, without holes.  The spi_device just resembles a bigger
controller, but internally it has multiple gpio_chip instances.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogpio: sysfs interface
David Brownell [Fri, 25 Jul 2008 08:46:07 +0000 (01:46 -0700)]
gpio: sysfs interface

This adds a simple sysfs interface for GPIOs.

    /sys/class/gpio
     /export ... asks the kernel to export a GPIO to userspace
     /unexport ... to return a GPIO to the kernel
        /gpioN ... for each exported GPIO #N
    /value ... always readable, writes fail for input GPIOs
    /direction ... r/w as: in, out (default low); write high, low
/gpiochipN ... for each gpiochip; #N is its first GPIO
    /base ... (r/o) same as N
    /label ... (r/o) descriptive, not necessarily unique
    /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1)

GPIOs claimed by kernel code may be exported by its owner using a new
gpio_export() call, which should be most useful for driver debugging.
Such exports may optionally be done without a "direction" attribute.

Userspace may ask to take over a GPIO by writing to a sysfs control file,
helping to cope with incomplete board support or other "one-off"
requirements that don't merit full kernel support:

  echo 23 > /sys/class/gpio/export
... will gpio_request(23, "sysfs") and gpio_export(23);
use /sys/class/gpio/gpio-23/direction to (re)configure it,
when that GPIO can be used as both input and output.
  echo 23 > /sys/class/gpio/unexport
... will gpio_free(23), when it was exported as above

The extra D-space footprint is a few hundred bytes, except for the sysfs
resources associated with each exported GPIO.  The additional I-space
footprint is about two thirds of the current size of gpiolib (!).  Since
no /dev node creation is involved, no "udev" support is needed.

Related changes:

  * This adds a device pointer to "struct gpio_chip".  When GPIO
    providers initialize that, sysfs gpio class devices become children of
    that device instead of being "virtual" devices.

  * The (few) gpio_chip providers which have such a device node have
    been updated.

  * Some gpio_chip drivers also needed to update their module "owner"
    field ...  for which missing kerneldoc was added.

  * Some gpio_chips don't support input GPIOs.  Those GPIOs are now
    flagged appropriately when the chip is registered.

Based on previous patches, and discussion both on and off LKML.

A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this
merges to mainline.

[akpm@linux-foundation.org: a few maintenance build fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokprobes: remove redundant config check
Abhishek Sagar [Fri, 25 Jul 2008 08:46:05 +0000 (01:46 -0700)]
kprobes: remove redundant config check

I noticed that there's a CONFIG_KPROBES check inside kernel/kprobes.c,
which is redundant.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokprobes: improve kretprobe scalability with hashed locking
Srinivasa D S [Fri, 25 Jul 2008 08:46:04 +0000 (01:46 -0700)]
kprobes: improve kretprobe scalability with hashed locking

Currently list of kretprobe instances are stored in kretprobe object (as
used_instances,free_instances) and in kretprobe hash table.  We have one
global kretprobe lock to serialise the access to these lists.  This causes
only one kretprobe handler to execute at a time.  Hence affects system
performance, particularly on SMP systems and when return probe is set on
lot of functions (like on all systemcalls).

Solution proposed here gives fine-grain locks that performs better on SMP
system compared to present kretprobe implementation.

Solution:

 1) Instead of having one global lock to protect kretprobe instances
    present in kretprobe object and kretprobe hash table.  We will have
    two locks, one lock for protecting kretprobe hash table and another
    lock for kretporbe object.

 2) We hold lock present in kretprobe object while we modify kretprobe
    instance in kretprobe object and we hold per-hash-list lock while
    modifying kretprobe instances present in that hash list.  To prevent
    deadlock, we never grab a per-hash-list lock while holding a kretprobe
    lock.

 3) We can remove used_instances from struct kretprobe, as we can
    track used instances of kretprobe instances using kretprobe hash
    table.

Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system
with return probes set on all systemcalls looks like this.

cacheline              non-cacheline             Un-patched kernel
aligned patch         aligned patch
===============================================================================
real    9m46.784s       9m54.412s                  10m2.450s
user    40m5.715s       40m7.142s                  40m4.273s
sys     2m57.754s       2m58.583s                  3m17.430s
===========================================================

Time duration for kernel compilation ("make -j 8) on the same system, when
kernel is not probed.
=========================
real    9m26.389s
user    40m8.775s
sys     2m7.283s
=========================

Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomfd: sm501 fix gpio number calculation for upper bank
Ben Dooks [Fri, 25 Jul 2008 08:46:03 +0000 (01:46 -0700)]
mfd: sm501 fix gpio number calculation for upper bank

The sm501_gpio_pin2nr() routine returns the wrong values for gpios in the
upper bank.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomfd: sm501 build fixes when CONFIG_MFD_SM501_GPIO unset
Ben Dooks [Fri, 25 Jul 2008 08:46:02 +0000 (01:46 -0700)]
mfd: sm501 build fixes when CONFIG_MFD_SM501_GPIO unset

Fix the build problems if CONFIG_MFD_SM501_GPIO is not set, which is
generally when there is no gpiolib support available as currently happens
on x86 when building PCI SM501.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosm501: fixes for akpms comments on gpiolib addition
Ben Dooks [Fri, 25 Jul 2008 08:46:02 +0000 (01:46 -0700)]
sm501: fixes for akpms comments on gpiolib addition

Fixup the comments from the patch that added the gpiolib support from
Andrew Morton.  These include spotting some missing frees on error or
release, and changing a memcpy for a type-safe assingment.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosm501: gpio I2C support
Ben Dooks [Fri, 25 Jul 2008 08:46:01 +0000 (01:46 -0700)]
sm501: gpio I2C support

Add support for adding the GPIO based I2C resources.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosm501: gpio dynamic registration for PCI devices
Arnaud Patard [Fri, 25 Jul 2008 08:46:00 +0000 (01:46 -0700)]
sm501: gpio dynamic registration for PCI devices

The SM501 PCI card requires a dyanmic gpio allocation as the number of
cards is not known at compile time.  Fixup the platform data and
registration to deal with this.

Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosm501: add gpiolib support
Ben Dooks [Fri, 25 Jul 2008 08:45:59 +0000 (01:45 -0700)]
sm501: add gpiolib support

Add support for exporting the GPIOs on the SM501 via gpiolib.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosm501: add power control callback
Ben Dooks [Fri, 25 Jul 2008 08:45:58 +0000 (01:45 -0700)]
sm501: add power control callback

Add callback to get or set the power control if the device has the sleep
connected to some form of GPIO.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoprintk ratelimiting rewrite
Dave Young [Fri, 25 Jul 2008 08:45:58 +0000 (01:45 -0700)]
printk ratelimiting rewrite

All ratelimit user use same jiffies and burst params, so some messages
(callbacks) will be lost.

For example:
a call printk_ratelimit(5 * HZ, 1)
b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will
will be supressed.

- rewrite __ratelimit, and use a ratelimit_state as parameter.  Thanks for
  hints from andrew.

- Add WARN_ON_RATELIMIT, update rcupreempt.h

- remove __printk_ratelimit

- use __ratelimit in net_ratelimit

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokallsyms: unify 32- and 64-bit code
Vegard Nossum [Fri, 25 Jul 2008 08:45:56 +0000 (01:45 -0700)]
kallsyms: unify 32- and 64-bit code

Use the %p format string which already accounts for the padding you need
with a pointer type on a particular architecture.

Also replace the macro with a static inline function to match the rest of
the file.

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolist debugging: use WARN() instead of BUG()
Dave Jones [Fri, 25 Jul 2008 08:45:55 +0000 (01:45 -0700)]
list debugging: use WARN() instead of BUG()

Arjan noted that the list_head debugging is BUG'ing when it detects
corruption.  By causing the box to panic immediately, we're possibly
losing some bug reports.  Changing this to a WARN() should mean we at the
least start seeing reports collected at kerneloops.org

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoExample use of WARN()
Arjan van de Ven [Fri, 25 Jul 2008 08:45:55 +0000 (01:45 -0700)]
Example use of WARN()

Now that WARN() exists, we can fold some of the printk's into it.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokernel/irq/manage.c: replace a printk + WARN_ON() to a WARN()
Arjan van de Ven [Fri, 25 Jul 2008 08:45:54 +0000 (01:45 -0700)]
kernel/irq/manage.c: replace a printk + WARN_ON() to a WARN()

Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoAdd a WARN() macro; this is WARN_ON() + printk arguments
Arjan van de Ven [Fri, 25 Jul 2008 08:45:53 +0000 (01:45 -0700)]
Add a WARN() macro; this is WARN_ON() + printk arguments

Add a WARN() macro that acts like WARN_ON(), with the added feature that it
takes a printk like argument that is printed as part of the warning message.

[akpm@linux-foundation.org: fix printk arguments]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoRename WARN() to WARNING() to clear the namespace
Arjan van de Ven [Fri, 25 Jul 2008 08:45:52 +0000 (01:45 -0700)]
Rename WARN() to WARNING() to clear the namespace

We want to use WARN() as a variant of WARN_ON(), however a few drivers are
using WARN() internally.  This patch renames these to WARNING() to avoid the
namespace clash.  A few cases were defining but not using the thing, for those
cases I just deleted the definition.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Greg KH <greg@kroah.com>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/misc/hpilo.c needs CONFIG_PCI
Andrew Morton [Fri, 25 Jul 2008 08:45:52 +0000 (01:45 -0700)]
drivers/misc/hpilo.c needs CONFIG_PCI

m68k allmodconfig:

drivers/misc/hpilo.c: In function 'ilo_ccb_close':
drivers/misc/hpilo.c:225: error: implicit declaration of function 'pci_free_consistent'
drivers/misc/hpilo.c: In function 'ilo_ccb_open':
drivers/misc/hpilo.c:244: error: implicit declaration of function 'pci_alloc_consistent'
drivers/misc/hpilo.c:245: warning: assignment makes pointer from integer without a cast

Cc: David Altobelli <david.altobelli@hp.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodocumentation: update CodingStyle tips for Emacs users
Johannes Weiner [Fri, 25 Jul 2008 08:45:51 +0000 (01:45 -0700)]
documentation: update CodingStyle tips for Emacs users

Describe a setup that integrates better with Emacs' cc-mode and also fixes
up the alignment of continuation lines to really only use tabs.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoinit/version.c: define version_string only if CONFIG_KALLSYMS is not defined
Daniel Guilak [Fri, 25 Jul 2008 08:45:50 +0000 (01:45 -0700)]
init/version.c: define version_string only if CONFIG_KALLSYMS is not defined

int Version_* is only used with ksymoops, which is only needed (according
to README and Documentation/Changes) if CONFIG_KALLSYMS is NOT defined.
Therefore this patch defines version_string only if CONFIG_KALLSYMS is not
defined.

Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoinit/version.c: silence sparse warning by declaring the version string
Daniel Guilak [Fri, 25 Jul 2008 08:45:49 +0000 (01:45 -0700)]
init/version.c: silence sparse warning by declaring the version string

Signed-off-by: Daniel Guilak <daniel@danielguilak.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoinit.h: remove obsolete content
Robert P. J. Day [Fri, 25 Jul 2008 08:45:49 +0000 (01:45 -0700)]
init.h: remove obsolete content

Remove apparently obsolete content from init.h referring to gcc 2.9x
and to "no_module_init".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>