firefly-linux-kernel-4.4.55.git
13 years agodrivers/rtc/rtc-s3c.c: support clock gating
Donggeun Kim [Tue, 26 Jul 2011 00:13:32 +0000 (17:13 -0700)]
drivers/rtc/rtc-s3c.c: support clock gating

Add support for clock gating.  Power consumption can be reduced by setting
rtc_clk disabled state except for when RTC related registers are accessed.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
Dmitry Eremin-Solenikov [Tue, 26 Jul 2011 00:13:30 +0000 (17:13 -0700)]
drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200

MPC5200B contains a limited version of RTC from MPC5121.  Add support for
the RTC on that CPU.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoinit: skip calibration delay if previously done
Sameer Nanda [Tue, 26 Jul 2011 00:13:29 +0000 (17:13 -0700)]
init: skip calibration delay if previously done

For each CPU, do the calibration delay only once.  For subsequent calls,
use the cached per-CPU value of loops_per_jiffy.

This saves about 200ms of resume time on dual core Intel Atom N5xx based
systems.  This helps bring down the kernel resume time on such systems
from about 500ms to about 300ms.

[akpm@linux-foundation.org: make cpu_loops_per_jiffy static]
[akpm@linux-foundation.org: clean up message text]
[akpm@linux-foundation.org: fix things up after upstream rmk changes]
Signed-off-by: Sameer Nanda <snanda@chromium.org>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Andrew Worsley <amworsley@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomisc/eeprom: add eeprom access driver for digsy_mtc board
Anatolij Gustschin [Tue, 26 Jul 2011 00:13:29 +0000 (17:13 -0700)]
misc/eeprom: add eeprom access driver for digsy_mtc board

Both displays on digsy_mtc board obtain their configuration from microwire
EEPROMs which are connected to the SoC over GPIO lines.  We need an easy
way to access the EEPROMs to write the needed display configuration or to
read out the currently programmed configuration.  The generic
eeprom_93xx46 SPI driver added by previous patch allows EEPROM access over
sysfs.  Using the simple driver added by this patch we provide used GPIO
interface and access control description on the board for generic
eeprom_93xx46 driver and spi_gpio driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomisc/eeprom: add driver for microwire 93xx46 EEPROMs
Anatolij Gustschin [Tue, 26 Jul 2011 00:13:27 +0000 (17:13 -0700)]
misc/eeprom: add driver for microwire 93xx46 EEPROMs

Add EEPROM driver for 93xx46 chips.  It can also be used with spi_gpio
driver to access 93xx46 EEPROMs connected over GPIO lines.  This driver
supports read/write/erase access to the EEPROM chips over sysfs files.

[rdunlap@xenotime.net: fix printk format]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch.pl: update $logFunctions
Joe Perches [Tue, 26 Jul 2011 00:13:27 +0000 (17:13 -0700)]
checkpatch.pl: update $logFunctions

Previous behavior allowed only alphabetic prefixes like pr_info to exceed
the 80 column line length limit.

ath6kl wants to add a digit into the prefix, so allow numbers as well as
digits in the <prefix>_<level> printks.

<prefix>_<level>_ratelimited and <prefix>_<level>_once and WARN_RATELIMIT
and WARN_ONCE may now exceed 80 cols.

Add missing <prefix>_printk type for completeness.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch: make utf-8 test --strict
Joe Perches [Tue, 26 Jul 2011 00:13:26 +0000 (17:13 -0700)]
checkpatch: make utf-8 test --strict

Some patches are sent in using ISO-8859 or even Windows codepage 1252.

Make checkpatch accept these by default and only emit the "Invalid UTF-8"
message when using --strict.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch.pl: add ability to ignore various messages
Joe Perches [Tue, 26 Jul 2011 00:13:25 +0000 (17:13 -0700)]
checkpatch.pl: add ability to ignore various messages

Some users would like the ability to not emit some of the messages that
checkpatch produces.  This can make it easier to use checkpatch in other
projects and integrate into scm hook scripts.

Add command line option to "--ignore" various message types.  Add option
--show-types to emit the "type" of each message.  Categorize all ERROR,
WARN and CHK messages with types.

Add optional .checkpatch.conf file to store default options.
3 paths are searched for .checkpatch.conf
    .             customized per-tree configurations
    $HOME         user global configuration when per-tree configs don't exist
    ./scripts     lk defaults to override script
The .conf file can contain any valid command-line argument and
the contents are prepended to any additional command line arguments.
Multiple lines may be used, blank lines are ignored, # is a comment.

Update "false positive" output for readability.

Update version to 0.32

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch: add a "prefer __aligned" check
Joe Perches [Tue, 26 Jul 2011 00:13:24 +0000 (17:13 -0700)]
checkpatch: add a "prefer __aligned" check

Prefer the use of __aligned(size) over __attribute__((__aligned___(size)))

Link: http://lkml.kernel.org/r/20110609094526.1571774c.akpm@linux-foundation.org
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch: validate signature styles and To: and Cc: lines
Joe Perches [Tue, 26 Jul 2011 00:13:23 +0000 (17:13 -0700)]
checkpatch: validate signature styles and To: and Cc: lines

Signatures have many forms and can sometimes cause problems if not in the
correct format when using git send-email or quilt.

Try to verify the signature tags and email addresses to use the generally
accepted "Signed-off-by: Full Name <email@domain.tld>" form.

Original idea by Anish Kumar <anish198519851985@gmail.com>

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Anish Kumar <anish198519851985@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch: add __rcu as a sparse modifier
Sven Eckelmann [Tue, 26 Jul 2011 00:13:23 +0000 (17:13 -0700)]
checkpatch: add __rcu as a sparse modifier

Fix "need consistent spacing around '*'" error after a __rcu sparse
annotation which was caused by the missing __rcu entry in the
checkpatch.pl internal list of sparse keywords.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocheckpatch: suggest using min_t or max_t
Joe Perches [Tue, 26 Jul 2011 00:13:22 +0000 (17:13 -0700)]
checkpatch: suggest using min_t or max_t

A common issue with min() or max() is using a cast on one or both of the
arguments when using min_t/max_t could be better.

Add cast detection to uses of min/max and suggest an appropriate use of
min_t or max_t instead.

Caveat:  This only works for min() or max() on a single line.
         It does not find min() or max() split across multiple lines.

This does find:
min((u32)foo, bar);
But it does not find:
max((unsigned long)foo,
    bar);

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/firmware/sigma.c needs MODULE_LICENSE
Randy Dunlap [Tue, 26 Jul 2011 00:13:21 +0000 (17:13 -0700)]
drivers/firmware/sigma.c needs MODULE_LICENSE

Fix module tainting message:

  sigma: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agolib: make _tolower() public
Andy Shevchenko [Tue, 26 Jul 2011 00:13:20 +0000 (17:13 -0700)]
lib: make _tolower() public

This function is required by *printf and kstrto* functions that are
located in the different modules.  This patch makes _tolower() public.
However, it's good idea to not use the helper outside of mentioned
functions.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agolib/lcm.c: quiet sparse noise
H Hartley Sweeten [Tue, 26 Jul 2011 00:13:20 +0000 (17:13 -0700)]
lib/lcm.c: quiet sparse noise

The symbol 'lcm' is exported to the kernel (EXPORT_SYMBOL_GPL).
Pick up it's definition in <linux/lcm.h> to quiet the sparse noise:

  warning: symbol 'lcm' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomach-ux500: add lm3530 ALS platform data for U5500
Linus Walleij [Tue, 26 Jul 2011 00:13:18 +0000 (17:13 -0700)]
mach-ux500: add lm3530 ALS platform data for U5500

From: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>

platform data for simple backlight driver for LM3530
in the u5500 platform

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoarch/arm/mach-ux500/board-u5500.c: calibrate ALS input voltage
Shreshtha Kumar Sahu [Tue, 26 Jul 2011 00:13:17 +0000 (17:13 -0700)]
arch/arm/mach-ux500/board-u5500.c: calibrate ALS input voltage

Provide the support for auto calibration of ALS Zone boundaries based on
min/max ALS input voltage.

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASS
Axel Lin [Tue, 26 Jul 2011 00:13:16 +0000 (17:13 -0700)]
drivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASS

We call led_classdev_register/led_classdev_unregister in
create_netxbig_led/delete_netxbig_led, thus make LEDS_NETXBIG depend on
LEDS_CLASS.

This patch fixes below build error if LEDS_CLASS is not configured.

    LD      .tmp_vmlinux1
  drivers/built-in.o: In function `create_netxbig_led':
  drivers/leds/leds-netxbig.c:350: undefined reference to `led_classdev_register'
  drivers/leds/leds-netxbig.c:361: undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `delete_netxbig_led':
  drivers/leds/leds-netxbig.c:313: undefined reference to `led_classdev_unregister'

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/leds/leds-sunfire.c: fix sunfire_led_generic_probe() error handling
Axel Lin [Tue, 26 Jul 2011 00:13:16 +0000 (17:13 -0700)]
drivers/leds/leds-sunfire.c: fix sunfire_led_generic_probe() error handling

- return -ENOMEM if kzalloc fails, rather than the current -EINVAL

- fix a memory leak in the case of goto out_unregister_led_cdevs

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/leds/leds-lp5521.c: provide section tagging
Linus Walleij [Tue, 26 Jul 2011 00:13:15 +0000 (17:13 -0700)]
drivers/leds/leds-lp5521.c: provide section tagging

Tag the and remove() function as __devexit respectively.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMAINTAINERS: update HIGH RESOLUTION TIMERS patterns
Joe Perches [Tue, 26 Jul 2011 00:13:14 +0000 (17:13 -0700)]
MAINTAINERS: update HIGH RESOLUTION TIMERS patterns

clockchips.h was typoed as clockevents.h

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoget_maintainers.pl: improve .mailmap parsing
Joe Perches [Tue, 26 Jul 2011 00:13:13 +0000 (17:13 -0700)]
get_maintainers.pl: improve .mailmap parsing

Entries that used formats other than "Proper Name <commit@email.xx>"
were not parsed properly.

Try to improve the parsing so that the entries in the forms of:
    Proper Name <proper@email.xx> <commit@email.xx>
and
    Proper Name <proper@email.xx> Commit Name <commit@email.xx>
are transformed correctly.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agokernel/configs.c: include MODULE_*() when CONFIG_IKCONFIG_PROC=n
Stephen Boyd [Tue, 26 Jul 2011 00:13:12 +0000 (17:13 -0700)]
kernel/configs.c: include MODULE_*() when CONFIG_IKCONFIG_PROC=n

If CONFIG_IKCONFIG=m but CONFIG_IKCONFIG_PROC=n we get a module that has
no MODULE_LICENSE definition.  Move the MODULE_*() definitions outside the
CONFIG_IKCONFIG_PROC #ifdef to prevent this configuration from tainting
the kernel.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonotifiers: vt: move vt notifiers into vt.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:12 +0000 (17:13 -0700)]
notifiers: vt: move vt notifiers into vt.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonotifiers: pm: move pm notifiers into suspend.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:11 +0000 (17:13 -0700)]
notifiers: pm: move pm notifiers into suspend.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonotifiers: sys: move reboot notifiers into reboot.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:10 +0000 (17:13 -0700)]
notifiers: sys: move reboot notifiers into reboot.h

It is not necessary to share the same notifier.h.

This patch already moves register_reboot_notifier() and
unregister_reboot_notifier() from kernel/notifier.c to kernel/sys.c.

[amwang@redhat.com: make allyesconfig succeed on ppc64]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonotifiers: net: move netdevice notifiers into netdevice.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:09 +0000 (17:13 -0700)]
notifiers: net: move netdevice notifiers into netdevice.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agonotifiers: cpu: move cpu notifiers into cpu.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:08 +0000 (17:13 -0700)]
notifiers: cpu: move cpu notifiers into cpu.h

We presently define all kinds of notifiers in notifier.h.  This is not
necessary at all, since different subsystems use different notifiers, they
are almost non-related with each other.

This can also save much build time.  Suppose I add a new netdevice event,
really I don't have to recompile all the source, just network related.
Without this patch, all the source will be recompiled.

I move the notify events near to their subsystem notifier registers, so
that they can be found more easily.

This patch:

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers/misc: add support the FSA9480 USB Switch
Donggeun Kim [Tue, 26 Jul 2011 00:13:07 +0000 (17:13 -0700)]
drivers/misc: add support the FSA9480 USB Switch

The FSA9480 is a USB port accessory detector and switch.  This patch adds
support the FSA9480 USB Switch.

[akpm@linux-foundation.org: make a couple of things static]
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agogeode: reflect mfgpt dependency on mfd
Philip A. Prindeville [Tue, 26 Jul 2011 00:13:05 +0000 (17:13 -0700)]
geode: reflect mfgpt dependency on mfd

As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs
which then make the GPIO, MFGPT, ACPI, etc.  all visible to the system.

So the dependencies of the MFGPT stuff have changed, and most people
expect Kconfig to bring in the necessary dependencies.  Without them, the
module fails to load and most people don't understand why because the
details of the rewrite aren't captured anywhere most people who know to
look.

This dependency needs to be reflected in Kconfig.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
Acked-by: Alexandros C. Couloumbis <alex@ozo.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoeisa/pci_eisa.c: fix section mismatch
Arnaud Lacombe [Tue, 26 Jul 2011 00:13:04 +0000 (17:13 -0700)]
eisa/pci_eisa.c: fix section mismatch

Fixes

  WARNING: vmlinux.o(.data+0x15d3ac): Section mismatch in reference from the variable pci_eisa_driver to the function .init.text:pci_eisa_init()
  The variable pci_eisa_driver references the function __init pci_eisa_init()
  If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable:
  *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoinclude/linux/kernel.h: hide internal macros from userspace
Arnaud Lacombe [Tue, 26 Jul 2011 00:13:03 +0000 (17:13 -0700)]
include/linux/kernel.h: hide internal macros from userspace

Unexpose to userland the following macros
 - __FUNCTION__
 - NUMA_BUILD
 - COMPACTION_BUILD
 - REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoinclude/linux/kernel.h: fix a headers_check warning
WANG Cong [Tue, 26 Jul 2011 00:13:02 +0000 (17:13 -0700)]
include/linux/kernel.h: fix a headers_check warning

Fix the warning:

  usr/include/linux/kernel.h:65: userspace cannot reference function or variable defined in the kernel

As Michal noted, BUILD_BUG_ON stuffs should be moved
under #ifdef __KERNEL__.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoinclude/linux/ioport.h: new helper to define common struct resource constructs
Uwe Kleine-König [Tue, 26 Jul 2011 00:13:00 +0000 (17:13 -0700)]
include/linux/ioport.h: new helper to define common struct resource constructs

Resource definitions that just define start, end and flags =
IORESOURCE_MEM or IORESOURCE_IRQ (with start=end) are quite common.  So
introduce a shortcut for them.  For completeness add macros for
IORESOURCE_DMA and IORESOURCE_IO, too and also make available a set of
macros to specify named resources of all types which are less common.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodevres: fix possible use after free
Maxin B John [Tue, 26 Jul 2011 00:12:59 +0000 (17:12 -0700)]
devres: fix possible use after free

devres uses the pointer value as key after it's freed, which is safe but
triggers spurious use-after-free warnings on some static analysis tools.
Rearrange code to avoid such warnings.

Signed-off-by: Maxin B. John <maxin.john@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoasm-generic/system.h: drop useless __KERNEL__
Mike Frysinger [Tue, 26 Jul 2011 00:12:58 +0000 (17:12 -0700)]
asm-generic/system.h: drop useless __KERNEL__

This header isn't exported to user-space, and even if it was, the
__KERNEL__ check covers the entire file, so we'd get a useless stub in the
first place.  So punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrivers: use kzalloc/kcalloc instead of 'kmalloc+memset', where possible
Rakib Mullick [Tue, 26 Jul 2011 00:12:56 +0000 (17:12 -0700)]
drivers: use kzalloc/kcalloc instead of 'kmalloc+memset', where possible

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: remove dead code
Richard Weinberger [Tue, 26 Jul 2011 00:12:55 +0000 (17:12 -0700)]
um: remove dead code

GCC 4.6's -Wunused-but-set-variable found some dead code.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: adjust size of pid_buf
Richard Weinberger [Tue, 26 Jul 2011 00:12:55 +0000 (17:12 -0700)]
um: adjust size of pid_buf

Linux can have pids up to 4*1024*1024.  To handle such huge numbers
pid_buf needs to be larger.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: implement a x86_64 vDSO
Richard Weinberger [Tue, 26 Jul 2011 00:12:54 +0000 (17:12 -0700)]
um: implement a x86_64 vDSO

Until now UML had no x86_64 vDSO.  So glibc always used the vsyscall page
for gettimeday() and friends.  Calls to gettimeday() returned falsely the
host time and confused some programs.

This patch adds a vDSO which turns all __vdso_* calls into a system call
so that UML can trap them.

As glibc still uses the vsyscall page for static binaries this patch
improves the situation only for dynamic binaries.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: set __HAVE_ARCH_GATE_AREA for x86_64
Richard Weinberger [Tue, 26 Jul 2011 00:12:54 +0000 (17:12 -0700)]
um: set __HAVE_ARCH_GATE_AREA for x86_64

Implement arch_vma_name() and make get_gate_vma(), in_gate_area() and
in_gate_area_no_mm() a nop.

We need arch_vma_name() to support vDSO.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: Set __HAVE_ARCH_GATE_AREA for i386
Richard Weinberger [Tue, 26 Jul 2011 00:12:53 +0000 (17:12 -0700)]
um: Set __HAVE_ARCH_GATE_AREA for i386

When UML is unable to reuse the host's vDSO FIXADDR_USER_START is zero.
To handle this special case correclty we have to implement custom gate
area helper methods.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: disable scan_elf_aux() on x86_64
Richard Weinberger [Tue, 26 Jul 2011 00:12:52 +0000 (17:12 -0700)]
um: disable scan_elf_aux() on x86_64

Reusing the host's vDSO makes only sense on x86_32.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agouml: free resources
Davidlohr Bueso [Tue, 26 Jul 2011 00:12:52 +0000 (17:12 -0700)]
uml: free resources

When creating the temp file there's a memory and file descriptor leak upon
error.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agouml: drivers/slip_user.c memory leak fix
Vitaliy Ivanov [Tue, 26 Jul 2011 00:12:51 +0000 (17:12 -0700)]
uml: drivers/slip_user.c memory leak fix

Do not free memory when you failed to allocate it.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agouml: helper.c warning corrections
Vitaliy Ivanov [Tue, 26 Jul 2011 00:12:50 +0000 (17:12 -0700)]
uml: helper.c warning corrections

Fix this warning:

  arch/um/os-Linux/helper.c: In function `helper_child':
  arch/um/os-Linux/helper.c:38:7: warning: ignoring return value of `write', declared with attribute warn_unused_result

[richard@nod.at: happens only with -D_FORTIFY_SOURCE=2]
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agouml: cow_user.c warning corrections
Vitaliy Ivanov [Tue, 26 Jul 2011 00:12:50 +0000 (17:12 -0700)]
uml: cow_user.c warning corrections

Fix this warning:

  arch/um/drivers/cow_user.c: In function `absolutize':
  arch/um/drivers/cow_user.c:189:7: warning: ignoring return value of `chdir', declared with attribute warn_unused_result

[richard@nod.at: happens only with -D_FORTIFY_SOURCE=2]
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agouml: drivers/net_user.c memory leak fix
Vitaliy Ivanov [Tue, 26 Jul 2011 00:12:49 +0000 (17:12 -0700)]
uml: drivers/net_user.c memory leak fix

Perform memory cleanup on exit.  On receiving invalid 'pid' we still
should clean 'output' variable.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: reinstate kernel version in generated .config
Geert Uytterhoeven [Tue, 26 Jul 2011 00:12:48 +0000 (17:12 -0700)]
um: reinstate kernel version in generated .config

Commit 0954828fcbf3 ("kconfig: replace KERNELVERSION usage by the
mainmenu's prompt") made the kernel version disappear from the generated
.config file when configuring for UML.  As UML's Kconfig doesn't have a
mainmenu, kconfig falls back to the default string "Linux Kernel
Configuration".

Add a suitable mainmenu to the main UML Kconfig file to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: add netpoll support
Richard Weinberger [Tue, 26 Jul 2011 00:12:48 +0000 (17:12 -0700)]
um: add netpoll support

To make netconsole usable on UML, its ethernet driver needs netpoll
support.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: fix _FORTIFY_SOURCE=2 support for kernel modules
Richard Weinberger [Tue, 26 Jul 2011 00:12:47 +0000 (17:12 -0700)]
um: fix _FORTIFY_SOURCE=2 support for kernel modules

When UML is compiled with _FORTIFY_SOURCE we have to export all _chk()
functions which are used in modules.  For now it's only the case for
__sprintf_chk().

Tested-by: Florian Fainelli <florian@openwrt.org>
Reported-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: clean up delay functions
Richard Weinberger [Tue, 26 Jul 2011 00:12:46 +0000 (17:12 -0700)]
um: clean up delay functions

Both sys-i386 and sys-x86_64 support now ndelay().  The delay functions
are based on arch/x86/lib/delay.c.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:45 +0000 (17:12 -0700)]
um, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoum: clean up vm-flags.h
Richard Weinberger [Tue, 26 Jul 2011 00:12:44 +0000 (17:12 -0700)]
um: clean up vm-flags.h

There is no need to define VM_{STACK,DATA}_DEFAULT_FLAGS as variable.
It's also useless to test for TIF_IA32 as 64bit UML has no IA32 emulation.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocris, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:44 +0000 (17:12 -0700)]
cris, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agocris: fix some build warnings in pinmux.c
WANG Cong [Tue, 26 Jul 2011 00:12:43 +0000 (17:12 -0700)]
cris: fix some build warnings in pinmux.c

Fix some harmless warnings such as

  arch/cris/arch-v32/mach-a3/pinmux.c:273: warning: ISO C90 forbids mixed declarations and code:

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agom68k, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:42 +0000 (17:12 -0700)]
m68k, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agom32r, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:40 +0000 (17:12 -0700)]
m32r, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoalpha, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:39 +0000 (17:12 -0700)]
alpha, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoh8300, exec: remove redundant set_fs(USER_DS)
Mathias Krause [Tue, 26 Jul 2011 00:12:38 +0000 (17:12 -0700)]
h8300, exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agowriteback: account NR_WRITTEN at IO completion time
Wu Fengguang [Tue, 26 Jul 2011 00:12:37 +0000 (17:12 -0700)]
writeback: account NR_WRITTEN at IO completion time

NR_WRITTEN is now accounted at block IO enqueue time, which is not very
accurate as to common understanding.  This moves NR_WRITTEN accounting to
the IO completion time and makes it more consistent with BDI_WRITTEN,
which is used for bandwidth estimation.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: simplify unuse and writepage
Hugh Dickins [Tue, 26 Jul 2011 00:12:37 +0000 (17:12 -0700)]
tmpfs: simplify unuse and writepage

shmem_unuse_inode() and shmem_writepage() contain a little code to cope
with pages inserted independently into the filecache, probably by a
filesystem stacked on top of tmpfs, then fed to its ->readpage() or
->writepage().

Unionfs was indeed experimenting with working in that way three years ago,
but I find no current examples: nowadays the stacking filesystems use vfs
interfaces to the lower filesystem.

It's now illegal: remove most of that code, adding some WARN_ON_ONCEs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Erez Zadok <ezk@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: simplify filepage/swappage
Hugh Dickins [Tue, 26 Jul 2011 00:12:36 +0000 (17:12 -0700)]
tmpfs: simplify filepage/swappage

We can now simplify shmem_getpage_gfp(): there is no longer a dilemma of
filepage passed in via shmem_readpage(), then swappage found, which must
then be copied over to it.

Although at first it's tempting to replace the **pagep arg by returning
struct page *, that makes a mess of IS_ERR_OR_NULL(page)s in all the
callers, so leave as is.

Insert BUG_ON(!PageUptodate) when we find and lock page: some of the
complication came from uninitialized pages inserted into filecache prior
to readpage; but now we're in control, and only release pagelock on
filecache once it's uptodate (if an error occurs in reading back from
swap, the page remains in swapcache, never moved to filecache).

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: simplify prealloc_page
Hugh Dickins [Tue, 26 Jul 2011 00:12:35 +0000 (17:12 -0700)]
tmpfs: simplify prealloc_page

The prealloc_page handling in shmem_getpage_gfp() is unnecessarily
complicated: first simplify that before going on to filepage/swappage.

That's right, don't report ENOMEM when the preallocation fails: we may or
may not need the page.  But simply report ENOMEM once we find we do need
it, instead of dropping lock, repeating allocation, unwinding on failure
etc.  And leave the out label on the fast path, don't goto.

Fix something that looks like a bug but turns out not to be: set
PageSwapBacked on prealloc_page before its mem_cgroup_cache_charge(), as
the removed case was doing.  That's important before adding to LRU
(determines which LRU the page goes on), and does affect which path it
takes through memcontrol.c, but in the end MEM_CGROUP_CHANGE_TYPE_ SHMEM
is handled no differently from CACHE.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: "Zhang, Yanmin" <yanmin.zhang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: remove_shmem_readpage
Hugh Dickins [Tue, 26 Jul 2011 00:12:34 +0000 (17:12 -0700)]
tmpfs: remove_shmem_readpage

Remove that pernicious shmem_readpage() at last: the things we needed it
for (splice, loop, sendfile, i915 GEM) are now fully taken care of by
shmem_file_splice_read() and shmem_read_mapping_page_gfp().

This removal clears the way for a simpler shmem_getpage_gfp(), since page
is never passed in; but leave most of that cleanup until after.

sys_readahead() and sys_fadvise(POSIX_FADV_WILLNEED) will now EINVAL,
instead of unexpectedly trying to read ahead on tmpfs: if that proves to
be an issue for someone, then we can either arrange for them to return
success instead, or try to implement async readahead on tmpfs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: pass gfp to shmem_getpage_gfp
Hugh Dickins [Tue, 26 Jul 2011 00:12:34 +0000 (17:12 -0700)]
tmpfs: pass gfp to shmem_getpage_gfp

Make shmem_getpage() a wrapper, passing mapping_gfp_mask() down to
shmem_getpage_gfp(), which in turn passes gfp down to shmem_swp_alloc().

Change shmem_read_mapping_page_gfp() to use shmem_getpage_gfp() in the
CONFIG_SHMEM case; but leave tiny !SHMEM using read_cache_page_gfp().

Add a BUG_ON() in case anyone happens to call this on a non-shmem mapping;
though we might later want to let that case route to read_cache_page_gfp().

It annoys me to have these two almost-redundant args, gfp and fault_type:
I can't find a better way; but initialize fault_type only in shmem_fault().

Note that before, read_cache_page_gfp() was allocating i915_gem's pages
with __GFP_NORETRY as intended; but the corresponding swap vector pages
got allocated without it, leaving a small possibility of OOM.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: refine shmem_file_splice_read
Hugh Dickins [Tue, 26 Jul 2011 00:12:33 +0000 (17:12 -0700)]
tmpfs: refine shmem_file_splice_read

Tidy up shmem_file_splice_read():

Remove readahead: okay, we could implement shmem readahead on swap,
but have never done so before, swap being the slow exceptional path.

Use shmem_getpage() instead of find_or_create_page() plus ->readpage().

Remove several comments: sorry, I found them more distracting than
helpful, and this will not be the reference version of splice_read().

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: clone shmem_file_splice_read()
Hugh Dickins [Tue, 26 Jul 2011 00:12:32 +0000 (17:12 -0700)]
tmpfs: clone shmem_file_splice_read()

Copy __generic_file_splice_read() and generic_file_splice_read() from
fs/splice.c to shmem_file_splice_read() in mm/shmem.c.  Make
page_cache_pipe_buf_ops and spd_release_page() accessible to it.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm/futex: fix futex writes on archs with SW tracking of dirty & young
Benjamin Herrenschmidt [Tue, 26 Jul 2011 00:12:32 +0000 (17:12 -0700)]
mm/futex: fix futex writes on archs with SW tracking of dirty & young

I haven't reproduced it myself but the fail scenario is that on such
machines (notably ARM and some embedded powerpc), if you manage to hit
that futex path on a writable page whose dirty bit has gone from the PTE,
you'll livelock inside the kernel from what I can tell.

It will go in a loop of trying the atomic access, failing, trying gup to
"fix it up", getting succcess from gup, go back to the atomic access,
failing again because dirty wasn't fixed etc...

So I think you essentially hang in the kernel.

The scenario is probably rare'ish because affected architecture are
embedded and tend to not swap much (if at all) so we probably rarely hit
the case where dirty is missing or young is missing, but I think Shan has
a piece of SW that can reliably reproduce it using a shared writable
mapping & fork or something like that.

On archs who use SW tracking of dirty & young, a page without dirty is
effectively mapped read-only and a page without young unaccessible in the
PTE.

Additionally, some architectures might lazily flush the TLB when relaxing
write protection (by doing only a local flush), and expect a fault to
invalidate the stale entry if it's still present on another processor.

The futex code assumes that if the "in_atomic()" access -EFAULT's, it can
"fix it up" by causing get_user_pages() which would then be equivalent to
taking the fault.

However that isn't the case.  get_user_pages() will not call
handle_mm_fault() in the case where the PTE seems to have the right
permissions, regardless of the dirty and young state.  It will eventually
update those bits ...  in the struct page, but not in the PTE.

Additionally, it will not handle the lazy TLB flushing that can be
required by some architectures in the fault case.

Basically, gup is the wrong interface for the job.  The patch provides a
more appropriate one which boils down to just calling handle_mm_fault()
since what we are trying to do is simulate a real page fault.

The futex code currently attempts to write to user memory within a
pagefault disabled section, and if that fails, tries to fix it up using
get_user_pages().

This doesn't work on archs where the dirty and young bits are maintained
by software, since they will gate access permission in the TLB, and will
not be updated by gup().

In addition, there's an expectation on some archs that a spurious write
fault triggers a local TLB flush, and that is missing from the picture as
well.

I decided that adding those "features" to gup() would be too much for this
already too complex function, and instead added a new simpler
fixup_user_fault() which is essentially a wrapper around handle_mm_fault()
which the futex code can call.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix some nits Darren saw, fiddle comment layout]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Shan Hai <haishan.bai@gmail.com>
Tested-by: Shan Hai <haishan.bai@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <darren.hart@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: remove useless rcu lock-unlock from mapping_tagged()
Konstantin Khlebnikov [Tue, 26 Jul 2011 00:12:31 +0000 (17:12 -0700)]
mm: remove useless rcu lock-unlock from mapping_tagged()

radix_tree_tagged() is lockless - it reads from a member of the raid-tree
root node.  It does not require any protection.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: page allocator: reconsider zones for allocation after direct reclaim
Mel Gorman [Tue, 26 Jul 2011 00:12:30 +0000 (17:12 -0700)]
mm: page allocator: reconsider zones for allocation after direct reclaim

With zone_reclaim_mode enabled, it's possible for zones to be considered
full in the zonelist_cache so they are skipped in the future.  If the
process enters direct reclaim, the ZLC may still consider zones to be full
even after reclaiming pages.  Reconsider all zones for allocation if
direct reclaim returns successfully.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: page allocator: initialise ZLC for first zone eligible for zone_reclaim
Mel Gorman [Tue, 26 Jul 2011 00:12:29 +0000 (17:12 -0700)]
mm: page allocator: initialise ZLC for first zone eligible for zone_reclaim

There have been a small number of complaints about significant stalls
while copying large amounts of data on NUMA machines reported on a
distribution bugzilla.  In these cases, zone_reclaim was enabled by
default due to large NUMA distances.  In general, the complaints have not
been about the workload itself unless it was a file server (in which case
the recommendation was disable zone_reclaim).

The stalls are mostly due to significant amounts of time spent scanning
the preferred zone for pages to free.  After a failure, it might fallback
to another node (as zonelists are often node-ordered rather than
zone-ordered) but stall quickly again when the next allocation attempt
occurs.  In bad cases, each page allocated results in a full scan of the
preferred zone.

Patch 1 checks the preferred zone for recent allocation failure
        which is particularly important if zone_reclaim has failed
        recently.  This avoids rescanning the zone in the near future and
        instead falling back to another node.  This may hurt node locality
        in some cases but a failure to zone_reclaim is more expensive than
        a remote access.

Patch 2 clears the zlc information after direct reclaim.
        Otherwise, zone_reclaim can mark zones full, direct reclaim can
        reclaim enough pages but the zone is still not considered for
        allocation.

This was tested on a 24-thread 2-node x86_64 machine.  The tests were
focused on large amounts of IO.  All tests were bound to the CPUs on
node-0 to avoid disturbances due to processes being scheduled on different
nodes.  The kernels tested are

3.0-rc6-vanilla Vanilla 3.0-rc6
zlcfirst Patch 1 applied
zlcreconsider Patches 1+2 applied

FS-Mark
./fs_mark  -d  /tmp/fsmark-10813  -D  100  -N  5000  -n  208  -L  35  -t  24  -S0  -s  524288
                fsmark-3.0-rc6       3.0-rc6        3.0-rc6
                   vanilla  zlcfirs  zlcreconsider
Files/s  min          54.90 ( 0.00%)       49.80 (-10.24%)       49.10 (-11.81%)
Files/s  mean        100.11 ( 0.00%)      135.17 (25.94%)      146.93 (31.87%)
Files/s  stddev       57.51 ( 0.00%)      138.97 (58.62%)      158.69 (63.76%)
Files/s  max         361.10 ( 0.00%)      834.40 (56.72%)      802.40 (55.00%)
Overhead min       76704.00 ( 0.00%)    76501.00 ( 0.27%)    77784.00 (-1.39%)
Overhead mean    1485356.51 ( 0.00%)  1035797.83 (43.40%)  1594680.26 (-6.86%)
Overhead stddev  1848122.53 ( 0.00%)   881489.88 (109.66%)  1772354.90 ( 4.27%)
Overhead max     7989060.00 ( 0.00%)  3369118.00 (137.13%) 10135324.00 (-21.18%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds)        501.49    493.91    499.93
Total Elapsed Time (seconds)               2451.57   2257.48   2215.92

MMTests Statistics: vmstat
Page Ins                                       46268       63840       66008
Page Outs                                   90821596    90671128    88043732
Swap Ins                                           0           0           0
Swap Outs                                          0           0           0
Direct pages scanned                        13091697     8966863     8971790
Kswapd pages scanned                               0     1830011     1831116
Kswapd pages reclaimed                             0     1829068     1829930
Direct pages reclaimed                      13037777     8956828     8648314
Kswapd efficiency                               100%         99%         99%
Kswapd velocity                                0.000     810.643     826.346
Direct efficiency                                99%         99%         96%
Direct velocity                             5340.128    3972.068    4048.788
Percentage direct scans                         100%         83%         83%
Page writes by reclaim                             0           3           0
Slabs scanned                                 796672      720640      720256
Direct inode steals                          7422667     7160012     7088638
Kswapd inode steals                                0     1736840     2021238

Test completes far faster with a large increase in the number of files
created per second.  Standard deviation is high as a small number of
iterations were much higher than the mean.  The number of pages scanned by
zone_reclaim is reduced and kswapd is used for more work.

LARGE DD
                3.0-rc6       3.0-rc6       3.0-rc6
                    vanilla     zlcfirst     zlcreconsider
download tar           59 ( 0.00%)   59 ( 0.00%)   55 ( 7.27%)
dd source files       527 ( 0.00%)  296 (78.04%)  320 (64.69%)
delete source          36 ( 0.00%)   19 (89.47%)   20 (80.00%)
MMTests Statistics: duration
User/Sys Time Running Test (seconds)        125.03    118.98    122.01
Total Elapsed Time (seconds)                624.56    375.02    398.06

MMTests Statistics: vmstat
Page Ins                                     3594216      439368      407032
Page Outs                                   23380832    23380488    23377444
Swap Ins                                           0           0           0
Swap Outs                                          0         436         287
Direct pages scanned                        17482342    69315973    82864918
Kswapd pages scanned                               0      519123      575425
Kswapd pages reclaimed                             0      466501      522487
Direct pages reclaimed                       5858054     2732949     2712547
Kswapd efficiency                               100%         89%         90%
Kswapd velocity                                0.000    1384.254    1445.574
Direct efficiency                                33%          3%          3%
Direct velocity                            27991.453  184832.737  208171.929
Percentage direct scans                         100%         99%         99%
Page writes by reclaim                             0        5082       13917
Slabs scanned                                  17280       29952       35328
Direct inode steals                           115257     1431122      332201
Kswapd inode steals                                0           0      979532

This test downloads a large tarfile and copies it with dd a number of
times - similar to the most recent bug report I've dealt with.  Time to
completion is reduced.  The number of pages scanned directly is still
disturbingly high with a low efficiency but this is likely due to the
number of dirty pages encountered.  The figures could probably be improved
with more work around how kswapd is used and how dirty pages are handled
but that is separate work and this result is significant on its own.

Streaming Mapped Writer
MMTests Statistics: duration
User/Sys Time Running Test (seconds)        124.47    111.67    112.64
Total Elapsed Time (seconds)               2138.14   1816.30   1867.56

MMTests Statistics: vmstat
Page Ins                                       90760       89124       89516
Page Outs                                  121028340   120199524   120736696
Swap Ins                                           0          86          55
Swap Outs                                          0           0           0
Direct pages scanned                       114989363    96461439    96330619
Kswapd pages scanned                        56430948    56965763    57075875
Kswapd pages reclaimed                      27743219    27752044    27766606
Direct pages reclaimed                         49777       46884       36655
Kswapd efficiency                                49%         48%         48%
Kswapd velocity                            26392.541   31363.631   30561.736
Direct efficiency                                 0%          0%          0%
Direct velocity                            53780.091   53108.759   51581.004
Percentage direct scans                          67%         62%         62%
Page writes by reclaim                           385         122        1513
Slabs scanned                                  43008       39040       42112
Direct inode steals                                0          10           8
Kswapd inode steals                              733         534         477

This test just creates a large file mapping and writes to it linearly.
Time to completion is again reduced.

The gains are mostly down to two things.  In many cases, there is less
scanning as zone_reclaim simply gives up faster due to recent failures.
The second reason is that memory is used more efficiently.  Instead of
scanning the preferred zone every time, the allocator falls back to
another zone and uses it instead improving overall memory utilisation.

This patch: initialise ZLC for first zone eligible for zone_reclaim.

The zonelist cache (ZLC) is used among other things to record if
zone_reclaim() failed for a particular zone recently.  The intention is to
avoid a high cost scanning extremely long zonelists or scanning within the
zone uselessly.

Currently the zonelist cache is setup only after the first zone has been
considered and zone_reclaim() has been called.  The objective was to avoid
a costly setup but zone_reclaim is itself quite expensive.  If it is
failing regularly such as the first eligible zone having mostly mapped
pages, the cost in scanning and allocation stalls is far higher than the
ZLC initialisation step.

This patch initialises ZLC before the first eligible zone calls
zone_reclaim().  Once initialised, it is checked whether the zone failed
zone_reclaim recently.  If it has, the zone is skipped.  As the first zone
is now being checked, additional care has to be taken about zones marked
full.  A zone can be marked "full" because it should not have enough
unmapped pages for zone_reclaim but this is excessive as direct reclaim or
kswapd may succeed where zone_reclaim fails.  Only mark zones "full" after
zone_reclaim fails if it failed to reclaim enough pages after scanning.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: preallocate page before lock_page() at filemap COW
KAMEZAWA Hiroyuki [Tue, 26 Jul 2011 00:12:27 +0000 (17:12 -0700)]
mm: preallocate page before lock_page() at filemap COW

Currently we are keeping faulted page locked throughout whole __do_fault
call (except for page_mkwrite code path) after calling file system's fault
code.  If we do early COW, we allocate a new page which has to be charged
for a memcg (mem_cgroup_newpage_charge).

This function, however, might block for unbounded amount of time if memcg
oom killer is disabled or fork-bomb is running because the only way out of
the OOM situation is either an external event or OOM-situation fix.

In the end we are keeping the faulted page locked and blocking other
processes from faulting it in which is not good at all because we are
basically punishing potentially an unrelated process for OOM condition in
a different group (I have seen stuck system because of ld-2.11.1.so being
locked).

We can do test easily.

 % cgcreate -g memory:A
 % cgset -r memory.limit_in_bytes=64M A
 % cgset -r memory.memsw.limit_in_bytes=64M A
 % cd kernel_dir; cgexec -g memory:A make -j

Then, the whole system will live-locked until you kill 'make -j'
by hands (or push reboot...) This is because some important page in a
a shared library are locked.

Considering again, the new page is not necessary to be allocated
with lock_page() held. And usual page allocation may dive into
long memory reclaim loop with holding lock_page() and can cause
very long latency.

There are 3 ways.
  1. do allocation/charge before lock_page()
     Pros. - simple and can handle page allocation in the same manner.
             This will reduce holding time of lock_page() in general.
     Cons. - we do page allocation even if ->fault() returns error.

  2. do charge after unlock_page(). Even if charge fails, it's just OOM.
     Pros. - no impact to non-memcg path.
     Cons. - implemenation requires special cares of LRU and we need to modify
             page_add_new_anon_rmap()...

  3. do unlock->charge->lock again method.
     Pros. - no impact to non-memcg path.
     Cons. - This may kill LOCK_PAGE_RETRY optimization. We need to release
             lock and get it again...

This patch moves "charge" and memory allocation for COW page
before lock_page(). Then, we can avoid scanning LRU with holding
a lock on a page and latency under lock_page() will be reduced.

Then, above livelock disappears.

[akpm@linux-foundation.org: fix code layout]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: Lutz Vieweg <lvml@5t9.de>
Original-idea-by: Michal Hocko <mhocko@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agotmpfs: no need to use i_lock
Hugh Dickins [Tue, 26 Jul 2011 00:12:26 +0000 (17:12 -0700)]
tmpfs: no need to use i_lock

2.6.36's 7e496299d4d2 ("tmpfs: make tmpfs scalable with percpu_counter for
used blocks") to make tmpfs scalable with percpu_counter used
inode->i_lock in place of sbinfo->stat_lock around i_blocks updates; but
that was adverse to scalability, and unnecessary, since info->lock is
already held there in the fast paths.

Remove those uses of i_lock, and add info->lock in the three error paths
where it's then needed across shmem_free_blocks().  It's not actually
needed across shmem_unacct_blocks(), but they're so often paired that it
looks wrong to split them apart.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: pincer in truncate_inode_pages_range
Hugh Dickins [Tue, 26 Jul 2011 00:12:25 +0000 (17:12 -0700)]
mm: pincer in truncate_inode_pages_range

truncate_inode_pages_range()'s final loop has a nice pincer property,
bringing start and end together, squeezing out the last pages.  But the
range handling missed out on that, just sliding up the range, perhaps
letting pages come in behind it.  Add one more test to give it the same
pincer effect.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: consistent truncate and invalidate loops
Hugh Dickins [Tue, 26 Jul 2011 00:12:25 +0000 (17:12 -0700)]
mm: consistent truncate and invalidate loops

Make the pagevec_lookup loops in truncate_inode_pages_range(),
invalidate_mapping_pages() and invalidate_inode_pages2_range() more
consistent with each other.

They were relying upon page->index of an unlocked page, but apologizing
for it: accept it, embrace it, add comments and WARN_ONs, and simplify the
index handling.

invalidate_inode_pages2_range() had special handling for a wrapped
page->index + 1 = 0 case; but MAX_LFS_FILESIZE doesn't let us anywhere
near there, and a corrupt page->index in the radix_tree could cause more
trouble than that would catch.  Remove that wrapped handling.

invalidate_inode_pages2_range() uses min() to limit the pagevec_lookup
when near the end of the range: copy that into the other two, although
it's less useful than you might think (it limits the use of the buffer,
rather than the indices looked up).

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: tidy vmtruncate_range and related functions
Hugh Dickins [Tue, 26 Jul 2011 00:12:24 +0000 (17:12 -0700)]
mm: tidy vmtruncate_range and related functions

Use consistent variable names in truncate_pagecache(), truncate_setsize(),
vmtruncate() and vmtruncate_range().

unmap_mapping_range() and vmtruncate_range() have mismatched interfaces:
don't change either, but make the vmtruncates more precise about what they
expect unmap_mapping_range() to do.

vmtruncate_range() is currently called only with page-aligned start and
end+1: can handle unaligned start, but unaligned end+1 would hit BUG_ON in
truncate_inode_pages_range() (lacks partial clearing of the end page).

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: truncate functions are in truncate.c
Hugh Dickins [Tue, 26 Jul 2011 00:12:23 +0000 (17:12 -0700)]
mm: truncate functions are in truncate.c

Correct comment on truncate_inode_pages*() in linux/mm.h; and remove
declaration of page_unuse(), it didn't exist even in 2.2.26 or 2.4.0!

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: cleanup descriptions of filler arg
Hugh Dickins [Tue, 26 Jul 2011 00:12:23 +0000 (17:12 -0700)]
mm: cleanup descriptions of filler arg

The often-NULL data arg to read_cache_page() and read_mapping_page()
functions is misdescribed as "destination for read data": no, it's the
first arg to the filler function, often struct file * to ->readpage().

Satisfy checkpatch.pl on those filler prototypes, and tidy up the
declarations in linux/pagemap.h.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agosparc64: implement get_user_pages_fast()
David S. Miller [Tue, 26 Jul 2011 00:12:22 +0000 (17:12 -0700)]
sparc64: implement get_user_pages_fast()

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agosparc64: add support for _PAGE_SPECIAL
David S. Miller [Tue, 26 Jul 2011 00:12:21 +0000 (17:12 -0700)]
sparc64: add support for _PAGE_SPECIAL

Luckily there are still a few software PTE bits remaining and they even
match up in both the sun4u and sun4v pte layouts.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agosparc64: use RCU page table freeing
David S. Miller [Tue, 26 Jul 2011 00:12:21 +0000 (17:12 -0700)]
sparc64: use RCU page table freeing

Make use of the generic RCU page table freeing on Sparc64, doing so allows
for race-free software page-table walkers like gup_fast().

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agosparc64: kill page table quicklists
David S. Miller [Tue, 26 Jul 2011 00:12:20 +0000 (17:12 -0700)]
sparc64: kill page table quicklists

With the recent mmu_gather changes that included generic RCU freeing of
page-tables, it is now quite straightforward to implement gup_fast() on
sparc64.

This patch:

Remove the page table quicklists.  They are pointless and make it harder
to use RCU page table freeing and share code with other architectures.

BTW, this is the second time this has happened, see commit 3c936465249f
("[SPARC64]: Kill pgtable quicklists and use SLAB.")

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agommap: fix and tidy up overcommit page arithmetic
Dmitry Fink [Tue, 26 Jul 2011 00:12:19 +0000 (17:12 -0700)]
mmap: fix and tidy up overcommit page arithmetic

- shmem pages are not immediately available, but they are not
  potentially available either, even if we swap them out, they will just
  relocate from memory into swap, total amount of immediate and
  potentially available memory is not going to be affected, so we
  shouldn't count them as potentially free in the first place.

- nr_free_pages() is not an expensive operation anymore, there is no
  need to split the decision making in two halves and repeat code.

Signed-off-by: Dmitry Fink <dmitry.fink@palm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm/memblock.c: avoid abuse of RED_INACTIVE
Andrew Morton [Tue, 26 Jul 2011 00:12:18 +0000 (17:12 -0700)]
mm/memblock.c: avoid abuse of RED_INACTIVE

RED_INACTIVE is a slab thing, and reusing it for memblock was
inappropriate, because memblock is dealing with phys_addr_t's which have a
Kconfigurable sizeof().

Create a new poison type for this application.  Fixes the sparse warning

    warning: cast truncates bits from constant value (9f911029d74e35b becomes 9d74e35b)

Reported-by: H Hartley Sweeten <hartleys@visionengravers.com>
Tested-by: H Hartley Sweeten <hartleys@visionengravers.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agooom: make deprecated use of oom_adj more verbose
David Rientjes [Tue, 26 Jul 2011 00:12:18 +0000 (17:12 -0700)]
oom: make deprecated use of oom_adj more verbose

/proc/pid/oom_adj is deprecated and scheduled for removal in August 2012
according to Documentation/feature-removal-schedule.txt.

This patch makes the warning more verbose by making it appear as a more
serious problem (the presence of a stack trace and being multiline should
attract more attention) so that applications still using the old interface
can get fixed.

Very popular users of the old interface have been converted since the oom
killer rewrite has been introduced.  udevd switched to the
/proc/pid/oom_score_adj interface for v162, kde switched in 4.6.1, and
opensshd switched in 5.7p1.

At the start of 2012, this should be changed into a WARN() to emit all
such incidents and then finally remove the tunable in August 2012 as
scheduled.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agooom: remove references to old badness() function
David Rientjes [Tue, 26 Jul 2011 00:12:17 +0000 (17:12 -0700)]
oom: remove references to old badness() function

The badness() function in the oom killer was renamed to oom_badness() in
a63d83f427fb ("oom: badness heuristic rewrite") since it is a globally
exported function for clarity.

The prototype for the old function still existed in linux/oom.h, so remove
it.  There are no existing users.

Also fixes documentation and comment references to badness() and adjusts
them accordingly.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm/memory.c: remove ZAP_BLOCK_SIZE
Andrew Morton [Tue, 26 Jul 2011 00:12:16 +0000 (17:12 -0700)]
mm/memory.c: remove ZAP_BLOCK_SIZE

ZAP_BLOCK_SIZE became unused in the preemptible-mmu_gather work ("mm:
Remove i_mmap_lock lockbreak").  So zap it.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: hugetlb: fix coding style issues
Chris Forbes [Tue, 26 Jul 2011 00:12:14 +0000 (17:12 -0700)]
mm: hugetlb: fix coding style issues

Fix coding style issues flagged by checkpatch.pl

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm/huge_memory.c: minor lock simplification in __khugepaged_exit
Chris Wright [Tue, 26 Jul 2011 00:12:14 +0000 (17:12 -0700)]
mm/huge_memory.c: minor lock simplification in __khugepaged_exit

The lock is released first thing in all three branches.  Simplify this by
unconditionally releasing lock and remove else clause which was only there
to be sure lock was released.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm/page_cgroup.c: simplify code by using SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN...
Daniel Kiper [Tue, 26 Jul 2011 00:12:13 +0000 (17:12 -0700)]
mm/page_cgroup.c: simplify code by using SECTION_ALIGN_UP() and SECTION_ALIGN_DOWN() macros

Commit a539f3533b78e3 ("mm: add SECTION_ALIGN_UP() and
SECTION_ALIGN_DOWN() macro") introduced the SECTION_ALIGN_UP() and
SECTION_ALIGN_DOWN() macros.  Use those macros to increase code
readability.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: remove the leftovers of noswapaccount
WANG Cong [Tue, 26 Jul 2011 00:12:12 +0000 (17:12 -0700)]
mm: remove the leftovers of noswapaccount

In commit a2c8990aed5ab ("memsw: remove noswapaccount kernel parameter"),
Michal forgot to remove some left pieces of noswapaccount in the tree,
this patch removes them all.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopagewalk: fix code comment for THP
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:11 +0000 (17:12 -0700)]
pagewalk: fix code comment for THP

Commit bae9c19bf1 ("thp: split_huge_page_mm/vma") changed locking behavior
of walk_page_range().  Thus this patch changes the comment too.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopagewalk: add locking-rule comments
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:10 +0000 (17:12 -0700)]
pagewalk: add locking-rule comments

Originally, walk_hugetlb_range() didn't require a caller take any lock.
But commit d33b9f45bd ("mm: hugetlb: fix hugepage memory leak in
walk_page_range") changed its rule.  Because it added find_vma() call in
walk_hugetlb_range().

Any locking-rule change commit should write a doc too.

[akpm@linux-foundation.org: clarify comment]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopagewalk: don't look up vma if walk->hugetlb_entry is unused
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:09 +0000 (17:12 -0700)]
pagewalk: don't look up vma if walk->hugetlb_entry is unused

Currently, walk_page_range() calls find_vma() every page table for walk
iteration.  but it's completely unnecessary if walk->hugetlb_entry is
unused.  And we don't have to assume find_vma() is a lightweight
operation.  So this patch checks the walk->hugetlb_entry and avoids the
find_vma() call if possible.

This patch also makes some cleanups.  1) remove ugly uninitialized_var()
and 2) #ifdef in function body.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agopagewalk: fix walk_page_range() don't check find_vma() result properly
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:09 +0000 (17:12 -0700)]
pagewalk: fix walk_page_range() don't check find_vma() result properly

The doc of find_vma() says,

    /* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
    struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)
    {
     (snip)

Thus, caller should confirm whether the returned vma matches a desired one.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: swap-token: add a comment for priority aging
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:08 +0000 (17:12 -0700)]
mm: swap-token: add a comment for priority aging

Document some swap token aging design decisions.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: swap-token: makes global variables to function local
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:07 +0000 (17:12 -0700)]
mm: swap-token: makes global variables to function local

global_faults and last_aging are only used in grab_swap_token().  Move
them into grab_swap_token().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: swap-token: fix dead link
KOSAKI Motohiro [Tue, 26 Jul 2011 00:12:06 +0000 (17:12 -0700)]
mm: swap-token: fix dead link

http://www.cs.wm.edu/~sjiang/token.pdf is now dead.  Replace it with an
alive alternative.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoxen/balloon: memory hotplug support for Xen balloon driver
Daniel Kiper [Tue, 26 Jul 2011 00:12:06 +0000 (17:12 -0700)]
xen/balloon: memory hotplug support for Xen balloon driver

Memory hotplug support for Xen balloon driver.  It should be mentioned
that hotplugged memory is not onlined automatically.  It should be onlined
by user through standard sysfs interface.

Memory could be hotplugged in following steps:

  1) dom0: xl mem-max <domU> <maxmem>
     where <maxmem> is >= requested memory size,

  2) dom0: xl mem-set <domU> <memory>
     where <memory> is requested memory size; alternatively memory
     could be added by writing proper value to
     /sys/devices/system/xen_memory/xen_memory0/target or
     /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,

  3) domU: for i in /sys/devices/system/memory/memory*/state; do \
             [ "`cat "$i"`" = offline ] && echo online > "$i"; done

Memory could be onlined automatically on domU by adding following line to
udev rules:

  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"

In that case step 3 should be omitted.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>