Merge remote-tracking branch 'lsk/v3.10/topic/arm64-dma' into linux-linaro-lsk

Conflicts:
arch/arm64/mm/dma-mapping.c
arch/arm64/mm/init.c

arm64: Make default dma_ops to be noncoherent

Currently arm64 dma_ops is by default made coherent which makes it
opposite in default policy from arm.

Make default dma_ops to be noncoherent (same as arm), as currently there
aren't any dma-capable drivers which assumes coherent ops

Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit c7a4a7658d689f664050c45493d79adf053f226e)

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Use swiotlb late initialisation

Since arm64 does not support ISA, there is no need for early swiotlb
initialisation. This patch switches the DMA mapping code to
swiotlb_tlb_late_init_with_default_size(). A side effect of this is that
GFP_DMA is used for the swiotlb buffer and devices with a 32-bit
coherent mask are correctly supported.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 3690951fc6d42f3a0903987677d0e592c49dd8db)
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Conflicts:
arch/arm64/mm/init.c
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Replace ZONE_DMA32 with ZONE_DMA

On arm64 we do not have two DMA zones, so it does not make sense to
implement ZONE_DMA32. This patch changes ZONE_DMA32 with ZONE_DMA, the
latter covering 32-bit dma address space to honour GFP_DMA allocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 19e7640d1f2302c20df2733e3e3df49acb17189e)
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Conflicts:
arch/arm64/mm/dma-mapping.c
Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Fix DMA range invalidation for cache line unaligned buffers

If the buffer needing cache invalidation for inbound DMA does start or
end on a cache line aligned address, we need to use the non-destructive
clean&invalidate operation. This issue was introduced by commit
7363590d2c46 (arm64: Implement coherent DMA API based on swiotlb).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org>
(cherry picked from commit ebf81a938dade3b450eb11c57fa744cfac4b523f)
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

DMA-API: provide a helper to setup DMA masks

Many drivers contain code such as:

dev->dma_mask = &dev->coherent_dma_mask;
dev->coherent_dma_mask = MASK;

Let's move this pattern out of drivers and have the DMA API provide a
helper for it.  This helper uses dma_set_mask_and_coherent() to allow
platform issues to be properly dealt with via dma_set_mask()/
dma_is_supported().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit fa6a8d6d65b19ab44e5244ea499bcd553cc72343)
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

DMA-API: provide a helper to set both DMA and coherent DMA masks

Provide a helper to set both the DMA and coherent DMA masks to the
same value - this avoids duplicated code in a number of drivers,
sometimes with buggy error handling, and also allows us identify
which drivers do things differently.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(cherry picked from commit 4aa806b771d16b810771d86ce23c4c3160888db3)
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-cma' into lsk-v3.10-arm64-dma

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-hmp' into linux-linaro-lsk

Conflicts:
arch/arm64/kernel/Makefile
arch/arm64/kernel/topology.c

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-topology' into lsk-v3.10-arm64-hmp

Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/topology.h
arch/arm64/kernel/smp.c
arch/arm64/kernel/topology.c

arm64: topology: Provide relative power numbers for cores

Provide performance numbers to the scheduler to help it fill the cores in
the system on big.LITTLE systems. With the current scheduler this may
perform poorly for applications that try to do OpenMP style work over all
cores but should help for more common workloads. The current 32 bit ARM
implementation provides a similar estimate so this helps ensure that
work to improve big.LITTLE systems on ARMv7 systems performs similarly
on ARMv8 systems.

The power numbers are the same as for ARMv7 since it seems that the
expected differential between the big and little cores is very similar on
both ARMv7 and ARMv8.  In both ARMv7 and ARMv8 cases the numbers were
based on the published DMIPS numbers.

These numbers are just an initial and basic approximation for use with
the current scheduler, it is likely that both experience with silicon
and ongoing work on improving the scheduler will lead to further tuning
or will tune automatically at runtime and so make the specific choice of
numbers here less critical.

Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: topology: Tell the scheduler about the relative power of cores

In heterogeneous systems like big.LITTLE systems the scheduler will be
able to make better use of the available cores if we provide power numbers
to it indicating their relative performance. Do this by parsing the CPU
nodes in the DT.

This code currently has no effect as no information on the relative
performance of the cores is provided.

Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: topology: Add support for topology DT bindings

Add support for parsing the explicit topology bindings to discover the
topology of the system.

Since it is not currently clear how to map multi-level clusters for the
scheduler all leaf clusters are presented to the scheduler at the same
level. This should be enough to provide good support for current systems.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

arm64: topology: Initialise default topology state immediately

As a legacy of the way 32 bit ARM did things the topology code uses a null
topology map by default and then overwrites it by mapping cores with no
information to a cluster by themselves later. In order to make it simpler
to reset things as part of recovering from parse failures in firmware
information directly set this configuration on init. A core will always be
its own sibling so there should be no risk of confusion with firmware
provided information.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

arm64: topology: Implement basic CPU topology support

Add basic CPU topology support to arm64, based on the existing pre-v8
code and some work done by Mark Hambleton.  This patch does not
implement any topology discovery support since that should be based on
information from firmware, it merely implements the scaffolding for
integration of topology support in the architecture.

No locking of the topology data is done since it is only modified during
CPU bringup with external serialisation from the SMP code.

The goal is to separate the architecture hookup for providing topology
information from the DT parsing in order to ease review and avoid
blocking the architecture code (which will be built on by other work)
with the DT code review by providing something simple and basic.

Following patches will implement support for interpreting topology
information from MPIDR and for parsing the DT topology bindings for ARM,
similar patches will be needed for ACPI.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: removed CONFIG_CPU_TOPOLOGY, always on if SMP]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit f6e763b93a6cd3411fd8df925344022719bcba62)
Signed-off-by: Mark Brown <broonie@linaro.org>
Conflicts:
arch/arm64/kernel/Makefile

of: move of_get_cpu_node implementation to DT core library

This patch moves the generalized implementation of of_get_cpu_node from
PowerPC to DT core library, thereby adding support for retrieving cpu
node for a given logical cpu index on any architecture.

The CPU subsystem can now use this function to assign of_node in the
cpu device while registering CPUs.

It is recommended to use these helper function only in pre-SMP/early
initialisation stages to retrieve CPU device node pointers in logical
ordering. Once the cpu devices are registered, it can be retrieved easily
from cpu device of_node which avoids unnecessary parsing and matching.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
(cherry picked from commit 183912d352a242a276a7877852f107459a13aff9)
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit 6e2bb9193fc2161ae2a5cfd11590aa9c0ae8a80d)
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branch 'lsk/v3.10/topic/arm64-hugepages' into linux-linaro-lsk

arm64: Fix build for __PAGE_NONE define

Simple typo.

Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: mm: Add double logical invert to pte accessors

Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.

For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.

This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: mm: Introduce PTE_WRITE

We have the following means for encoding writable or dirty ptes:

                                PTE_DIRTY       PTE_RDONLY
!pte_dirty && !pte_write        0               1
!pte_dirty && pte_write         0               1
pte_dirty && !pte_write         1               1
pte_dirty && pte_write          1               0

So we can't distinguish between writable clean ptes and read only
ptes. This can cause problems with ptes being incorrectly flagged as
read only when they are writable but not dirty.

This patch introduces a new software bit PTE_WRITE which allows us to
correctly identify writable ptes. PTE_RDONLY is now only clear for
valid ptes where a page is both writable and dirty.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Conflicts:
arch/arm64/include/asm/pgtable.h

arm64: mm: Remove PTE_BIT_FUNC macro

Expand out the pte manipulation functions. This makes our life easier
when using things like tags and cscope.

Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

mm/hugetlb.c: call MMU notifiers when copying a hugetlb page range

When copy_hugetlb_page_range() is called to copy a range of hugetlb
mappings, the secondary MMUs are not notified if there is a protection
downgrade, which breaks COW semantics in KVM.

This patch adds the necessary MMU notifier calls.

Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Acked-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: mm: Fix PMD_SECT_PROT_NONE definition

Modify the value of PMD_SECT_PROT_NONE to match that of PTE_NONE. This
should have been in commit 3676f9ef5481 (Move PTE_PROT_NONE higher up).

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+: 3676f9ef5481: arm64: Move PTE_PROT_NONE higher up
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: Move PTE_PROT_NONE higher up

PTE_PROT_NONE means that a pte is present but does not have any
read/write attributes. However, setting the memory type like
pgprot_writecombine() is allowed and such bits overlap with
PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the
vma->vm_pg_prot on PROT_NONE mappings.

This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit
59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE
together with the other software bits.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+

ARM64: mm: THP support.

Bring Transparent HugePage support to ARM. The size of a
transparent huge page depends on the normal page size. A
transparent huge page is always represented as a pmd.

If PAGE_SIZE is 4KB, THPs are 2MB.
If PAGE_SIZE is 64KB, THPs are 512MB.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.

The buddy allocator has a default MAX_ORDER of 11, which is too
low to allocate enough memory for 512MB Transparent HugePages if
our base page size is 64KB.

This patch introduces MAX_ZONE_ORDER and sets it to 14 when 64KB
pages are used in conjuction with THP, otherwise the default value
of 11 is used.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

ARM64: mm: HugeTLB support.

Add huge page support to ARM64, different huge page sizes are
supported depending on the size of normal pages:

PAGE_SIZE is 4KB:
   2MB - (pmds) these can be allocated at any time.
1024MB - (puds) usually allocated on bootup with the command line
         with something like: hugepagesz=1G hugepages=6

PAGE_SIZE is 64KB:
 512MB - (pmds) usually allocated on bootup via command line.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

ARM64: mm: Move PTE_PROT_NONE bit.

Under ARM64, PTEs can be broadly categorised as follows:
   - Present and valid: Bit #0 is set. The PTE is valid and memory
     access to the region may fault.

   - Present and invalid: Bit #0 is clear and bit #1 is set.
     Represents present memory with PROT_NONE protection. The PTE
     is an invalid entry, and the user fault handler will raise a
     SIGSEGV.

   - Not present (file or swap): Bits #0 and #1 are clear.
     Memory represented has been paged out. The PTE is an invalid
     entry, and the fault handler will try and re-populate the
     memory where necessary.

Huge PTEs are block descriptors that have bit #1 clear. If we wish
to represent PROT_NONE huge PTEs we then run into a problem as
there is no way to distinguish between regular and huge PTEs if we
set bit #1.

To resolve this ambiguity this patch moves PTE_PROT_NONE from
bit #1 to bit #2 and moves PTE_FILE from bit #2 to bit #3. The
number of swap/file bits is reduced by 1 as a consequence, leaving
60 bits for file and swap entries.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

ARM64: mm: Make PAGE_NONE pages read only and no-execute.

If we consider the following code sequence:

my_pte = pte_modify(entry, myprot);
x = pte_write(my_pte);
y = pte_exec(my_pte);

If myprot comes from a PROT_NONE page, then x and y will both be
true which is undesireable behaviour.

This patch sets the no-execute and read-only bits for PAGE_NONE
such that the code above will return false for both x and y.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

ARM64: mm: Restore memblock limit when map_mem finished.

In paging_init the memblock limit is set to restrict any addresses
returned by early_alloc to fit within the initial direct kernel
mapping in swapper_pg_dir. This allows map_mem to allocate puds,
pmds and ptes from the initial direct kernel mapping.

The limit stays low after paging_init() though, meaning any
bootmem allocations will be from a restricted subset of memory.
Gigabyte huge pages, for instance, are normally allocated from
bootmem as their order (18) is too large for the default buddy
allocator (MAX_ORDER = 11).

This patch restores the memblock limit when map_mem has finished,
allowing gigabyte huge pages (and other objects) to be allocated
from all of bootmem.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

mm: thp: Correct the HPAGE_PMD_ORDER check.

All Transparent Huge Pages are allocated by the buddy allocator.

A compile time check is in place that fails when the order of a
transparent huge page is too large to be allocated by the buddy
allocator. Unfortunately that compile time check passes when:
HPAGE_PMD_ORDER == MAX_ORDER
( which is incorrect as the buddy allocator can only allocate
memory of order strictly less than MAX_ORDER. )

This patch updates the compile time check to fail in the above
case.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

x86: mm: Remove general hugetlb code from x86.

huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d have
already been copied over to mm.

This patch removes the x86 copies of these functions and activates
the general ones by enabling:
CONFIG_ARCH_WANT_GENERAL_HUGETLB

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb: Copy general hugetlb code from x86 to mm.

The huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d
functions in x86/mm/hugetlbpage.c do not rely on any architecture
specific knowledge other than the fact that pmds and puds can be
treated as huge ptes.

To allow other architectures to use this code (and reduce the need
for code duplication), this patch copies these functions into mm,
replaces the use of pud_large with pud_huge and provides a config
flag to activate them:
CONFIG_ARCH_WANT_GENERAL_HUGETLB

If CONFIG_ARCH_WANT_HUGE_PMD_SHARE is also active then the
huge_pmd_share code will be called by huge_pte_alloc (othewise we
call pmd_alloc and skip the sharing code).

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

x86: mm: Remove x86 version of huge_pmd_share.

The huge_pmd_share code has been copied over to mm/hugetlb.c to
make it accessible to other architectures.

Remove the x86 copy of the huge_pmd_share code and enable the
ARCH_WANT_HUGE_PMD_SHARE config flag. That way we reference the
general one.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb: Copy huge_pmd_share from x86 to mm.

Under x86, multiple puds can be made to reference the same bank of
huge pmds provided that they represent a full PUD_SIZE of shared
huge memory that is aligned to a PUD_SIZE boundary.

The code to share pmds does not require any architecture specific
knowledge other than the fact that pmds can be indexed, thus can
be beneficial to some other architectures.

This patch copies the huge pmd sharing (and unsharing) logic from
x86/ to mm/ and introduces a new config option to activate it:
CONFIG_ARCH_WANTS_HUGE_PMD_SHARE

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>

Merge remote-tracking branch 'lsk/v3.10/topic/juno' into linux-linaro-lsk

Conflicts:
arch/arm64/boot/dts/Makefile

Merge remote-tracking branch 'lsk/v3.10/topic/misc' into linux-linaro-lsk

dtc: Use general include directory

Since newer DT bindings include references to include/dt-bindings we need
to make this available to build DTs using them. Upstream has a number of
reworkings which are much more invasive but featureful, just include a
minimal fix.

Signed-off-by: Mark Brown <broonie@linaro.org>

arm64: Add Juno platform support

[Squashed down several commits from dev repository, reused vexpress
config option -- broonie]

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branch 'lsk/v3.10/topic/configs' into linux-linaro-lsk

linaro/configs: add fragment preempt-rt

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branch 'lsk/v3.10/topic/big.LITTLE' into linux-linaro-lsk

Merge branch 'for-lsk' of git://git.linaro.org/arm/big.LITTLE/mp into lsk-v3.10-big.LITTLE

sched: hmp: Change small task packing defaults for all platforms

All platforms other than TC2 default to enabling packing. Since TC2
shows no performance or energy degradation with this feature enabled
make it default enabled the same as everyone else.
Likewise, vendors have been including TC2 support in multi-machine
kernel builds so they expect the default thresholds to remain the
same when the TC2 #ifdef is removed.

Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>

Merge tag 'v3.10.39' into linux-linaro-lsk

This is the 3.10.39 stable release

Linux 3.10.39

usb: musb: avoid NULL pointer dereference

commit eee3f15d5f1f4f0c283dd4db67dc1b874a2852d1 upstream.

instead of relying on the otg pointer, which
can be NULL in certain cases, we can use the
gadget and host pointers we already hold inside
struct musb.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: pl2303: add ids for Hewlett-Packard HP POS pole displays

commit b16c02fbfb963fa2941b7517ebf1f8a21946775e upstream.

Add device ids to pl2303 for the Hewlett-Packard HP POS pole displays:

LD960: 03f0:0B39
LCM220: 03f0:3139
LCM960: 03f0:3239

[ Johan: fix indentation and sort PIDs numerically ]

Signed-off-by: Aaron Sanders <aaron.sanders@hp.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use i_size_read in ext4_unaligned_aio()

commit 6e6358fc3c3c862bfe9a5bc029d3f8ce43dc9765 upstream.

We haven't taken i_mutex yet, so we need to use i_size_read().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix jbd2 warning under heavy xattr load

commit ec4cb1aa2b7bae18dd8164f2e9c7c51abcf61280 upstream.

When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:

WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()

CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G    W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
 [<ffffffff816311b0>] dump_stack+0x19/0x1b
 [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90
 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
 [<ffffffff8119421e>] setxattr+0x13e/0x1e0
 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b

The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:

CPU1                                CPU2
ext4_xattr_release_block()          ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
  le32_add_cpu(&BHDR(bh)->h_refcount, -1);
  unlock_buffer(bh);
                                    lock_buffer(bh);
                                    /* True */
                                    if (BHDR(bh)->h_refcount == cpu_to_le32(1))
                                      get_bh(bh);
                                      ext4_free_blocks()
                                        ...
                                        jbd2_journal_forget()
                                          jbd2_journal_unfile_buffer()
                                          -> JH is gone
  error = ext4_handle_dirty_xattr_block(handle, inode, bh);
  -> triggers the warning

We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.

Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: do not put bh when buffer_uptodate failed

commit f7cf4f5bfe073ad792ab49c04f247626b3e38db6 upstream.

Do not put bh when buffer_uptodate failed in ocfs2_write_block and
ocfs2_write_super_or_backup, because it will put bh in b_end_io.
Otherwise it will hit a warning "VFS: brelse: Trying to free free
buffer".

Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: dlm: fix recovery hung

commit ded2cf71419b9353060e633b59e446c42a6a2a09 upstream.

There is a race window in dlm_do_recovery() between dlm_remaster_locks()
and dlm_reset_recovery() when the recovery master nearly finish the
recovery process for a dead node.  After the master sends FINALIZE_RECO
message in dlm_remaster_locks(), another node may become the recovery
master for another dead node, and then send the BEGIN_RECO message to
all the nodes included the old master, in the handler of this message
dlm_begin_reco_handler() of old master, dlm->reco.dead_node and
dlm->reco.new_master will be set to the second dead node and the new
master, then in dlm_reset_recovery(), these two variables will be reset
to default value.  This will cause new recovery master can not finish
the recovery process and hung, at last the whole cluster will hung for
recovery.

old recovery master:                                 new recovery master:
dlm_remaster_locks()
                                                  become recovery master for
                                                  another dead node.
                                                  dlm_send_begin_reco_message()
dlm_begin_reco_handler()
{
 if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) {
  return -EAGAIN;
 }
 dlm_set_reco_master(dlm, br->node_idx);
 dlm_set_reco_dead_node(dlm, br->dead_node);
}
dlm_reset_recovery()
{
 dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM);
 dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM);
}
                                                  will hang in dlm_remaster_locks() for
                                                  request dlm locks info

Before send FINALIZE_RECO message, recovery master should set
DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done,
this can break the race windows as the BEGIN_RECO messages will not be
handled before DLM_RECO_STATE_FINALIZE flag is cleared.

A similar race may happen between new recovery master and normal node
which is in dlm_finalize_reco_handler(), also fix it.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: dlm: fix lock migration crash

commit 34aa8dac482f1358d59110d5e3a12f4351f6acaa upstream.

This issue was introduced by commit 800deef3f6f8 ("ocfs2: use
list_for_each_entry where benefical") in 2007 where it replaced
list_for_each with list_for_each_entry.  The variable "lock" will point
to invalid data if "tmpq" list is empty and a panic will be triggered
due to this.  Sunil advised reverting it back, but the old version was
also not right.  At the end of the outer for loop, that
list_for_each_entry will also set "lock" to an invalid data, then in the
next loop, if the "tmpq" list is empty, "lock" will be an stale invalid
data and cause the panic.  So reverting the list_for_each back and reset
"lock" to NULL to fix this issue.

Another concern is that this seemes can not happen because the "tmpq"
list should not be empty.  Let me describe how.

old lock resource owner(node 1):                                  migratation target(node 2):
image there's lockres with a EX lock from node 2 in
granted list, a NR lock from node x with convert_type
EX in converting list.
dlm_empty_lockres() {
 dlm_pick_migration_target() {
   pick node 2 as target as its lock is the first one
   in granted list.
 }
 dlm_migrate_lockres() {
   dlm_mark_lockres_migrating() {
     res->state |= DLM_LOCK_RES_BLOCK_DIRTY;
     wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res));
 //after the above code, we can not dirty lockres any more,
     // so dlm_thread shuffle list will not run
                                                                   downconvert lock from EX to NR
                                                                   upconvert lock from NR to EX
<<< migration may schedule out here, then
<<< node 2 send down convert request to convert type from EX to
<<< NR, then send up convert request to convert type from NR to
<<< EX, at this time, lockres granted list is empty, and two locks
<<< in the converting list, node x up convert lock followed by
<<< node 2 up convert lock.

 // will set lockres RES_MIGRATING flag, the following
 // lock/unlock can not run
     dlm_lockres_release_ast(dlm, res);
   }

   dlm_send_one_lockres()
                                                                 dlm_process_recovery_data()
                                                                   for (i=0; i<mres->num_locks; i++)
                                                                     if (ml->node == dlm->node_num)
                                                                       for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
                                                                        list_for_each_entry(lock, tmpq, list)
                                                                        if (lock) break; <<< lock is invalid as grant list is empty.
                                                                       }
                                                                       if (lock->ml.node != ml->node)
                                                                         BUG() >>> crash here
 }

I see the above locks status from a vmcore of our internal bug.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hung_task: check the value of "sysctl_hung_task_timeout_sec"

commit 80df28476505ed4e6701c3448c63c9229a50c655 upstream.

As sysctl_hung_task_timeout_sec is unsigned long, when this value is
larger then LONG_MAX/HZ, the function schedule_timeout_interruptible in
watchdog will return immediately without sleep and with print :

  schedule_timeout: wrong timeout value ffffffffffffff83

and then the funtion watchdog will call schedule_timeout_interruptible
again and again.  The screen will be filled with

"schedule_timeout: wrong timeout value ffffffffffffff83"

This patch does some check and correction in sysctl, to let the function
schedule_timeout_interruptible allways get the valid parameter.

Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Tested-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlb: fix softlockup when a large number of hugepages are freed.

commit 55f67141a8927b2be3e51840da37b8a2320143ed upstream.

When I decrease the value of nr_hugepage in procfs a lot, softlockup
happens.  It is because there is no chance of context switch during this
process.

On the other hand, when I allocate a large number of hugepages, there is
some chance of context switch.  Hence softlockup doesn't happen during
this process.  So it's necessary to add the context switch in the
freeing process as same as allocating process to avoid softlockup.

When I freed 12 TB hugapages with kernel-2.6.32-358.el6, the freeing
process occupied a CPU over 150 seconds and following softlockup message
appeared twice or more.

$ echo 6000000 > /proc/sys/vm/nr_hugepages
$ cat /proc/sys/vm/nr_hugepages
6000000
$ grep ^Huge /proc/meminfo
HugePages_Total:   6000000
HugePages_Free:    6000000
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
$ echo 0 > /proc/sys/vm/nr_hugepages

BUG: soft lockup - CPU#16 stuck for 67s! [sh:12883] ...
Pid: 12883, comm: sh Not tainted 2.6.32-358.el6.x86_64 #1
Call Trace:
  free_pool_huge_page+0xb8/0xd0
  set_max_huge_pages+0x128/0x190
  hugetlb_sysctl_handler_common+0x113/0x140
  hugetlb_sysctl_handler+0x1e/0x20
  proc_sys_call_handler+0x97/0xd0
  proc_sys_write+0x14/0x20
  vfs_write+0xb8/0x1a0
  sys_write+0x51/0x90
  __audit_syscall_exit+0x265/0x290
  system_call_fastpath+0x16/0x1b

I have not confirmed this problem with upstream kernels because I am not
able to prepare the machine equipped with 12TB memory now.  However I
confirmed that the amount of decreasing hugepages was directly
proportional to the amount of required time.

I measured required times on a smaller machine.  It showed 130-145
hugepages decreased in a millisecond.

  Amount of decreasing     Required time      Decreasing rate
  hugepages                     (msec)         (pages/msec)
  ------------------------------------------------------------
  10,000 pages == 20GB         70 -  74          135-142
  30,000 pages == 60GB        208 - 229          131-144

It means decrement of 6TB hugepages will trigger softlockup with the
default threshold 20sec, in this decreasing rate.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: try_to_unmap_cluster() should lock_page() before mlocking

commit 57e68e9cd65b4b8eb4045a1e0d0746458502554c upstream.

A BUG_ON(!PageLocked) was triggered in mlock_vma_page() by Sasha Levin
fuzzing with trinity.  The call site try_to_unmap_cluster() does not lock
the pages other than its check_page parameter (which is already locked).

The BUG_ON in mlock_vma_page() is not documented and its purpose is
somewhat unclear, but apparently it serializes against page migration,
which could otherwise fail to transfer the PG_mlocked flag.  This would
not be fatal, as the page would be eventually encountered again, but
NR_MLOCK accounting would become distorted nevertheless.  This patch adds
a comment to the BUG_ON in mlock_vma_page() and munlock_vma_page() to that
effect.

The call site try_to_unmap_cluster() is fixed so that for page !=
check_page, trylock_page() is attempted (to avoid possible deadlocks as we
already have check_page locked) and mlock_vma_page() is performed only
upon success.  If the page lock cannot be obtained, the page is left
without PG_mlocked, which is again not a problem in the whole unevictable
memory design.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: fix format string bug in stack tracer

commit a0c32761e73c9999cbf592b702f284221fea8040 upstream.

Kees reported the following error:

   arch/sh/kernel/dumpstack.c: In function 'print_trace_address':
   arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security]

Use the "%s" format so that it's impossible to interpret 'data' as a
format string.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Reported-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtip32xx: Set queue bounce limit

commit 1044b1bb9278f2e656a1a7b63dc24a59506540aa upstream.

We need to set the queue bounce limit during the device initialization to
prevent excessive bouncing on 32 bit architectures.

Signed-off-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: unbind all interfaces before rebinding any

commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream.

When a driver doesn't have pre_reset, post_reset, or reset_resume
methods, the USB core unbinds that driver when its device undergoes a
reset or a reset-resume, and then rebinds it afterward.

The existing straightforward implementation can lead to problems,
because each interface gets unbound and rebound before the next
interface is handled.  If a driver claims additional interfaces, the
claim may fail because the old binding instance may still own the
additional interface when the new instance tries to claim it.

This patch fixes the problem by first unbinding all the interfaces
that are marked (i.e., their needs_binding flag is set) and then
rebinding all of them.

The patch also makes the helper functions in driver.c a little more
uniform and adjusts some out-of-date comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210

commit ead5178bf442dbae4008ee54bf4f66a1f6a317c9 upstream.

Add new ulpi IDs which are available on Xilinx Zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hvc: ensure hvc_init is only ever called once in hvc_console.c

commit f76a1cbed18c86e2d192455f0daebb48458965f3 upstream.

Commit 3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of
khcvd thread") moved the call of hvc_init from being a device_initcall
into hvc_alloc, and used a non-null hvc_driver as indication of whether
hvc_init had already been called.

The problem with this is that hvc_driver is only assigned a value
at the bottom of hvc_init, and so there is a window where multiple
hvc_alloc calls can be in progress at the same time and hence try
and call hvc_init multiple times.  Previously the use of device_init
guaranteed that hvc_init was only called once.

This manifests itself as sporadic instances of two hvc_init calls
racing each other, and with the loser of the race getting -EBUSY
from tty_register_driver() and hence that virtual console fails:

    Couldn't register hvc console driver
    virtio-ports vport0p1: error -16 allocating hvc for port

Here we add an atomic_t to guarantee we'll never run hvc_init twice.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 3e6c6f630a52 ("Delay creation of khcvd thread")
Reported-by: Jim Somerville <Jim.Somerville@windriver.com>
Tested-by: Jim Somerville <Jim.Somerville@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix wrong bit mask in dwc3_event_devt

commit 06f9b6e59661cee510b04513b13ea7927727d758 upstream.

Around DWC USB3 2.30a release another bit has been added to the
Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield.

Because of that, what used to be 8 bits long, has become 9 bits long.

Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of
Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits
not 8 bits. And the following reserved field uses [31:25] bits not
[31:24] bits, and it has 7 bits.

So in dwc3_event_devt, the bit mask should be:
event_info [24:16] 9 bits
reserved31_25 [31:25] 7 bits

This patch makes sure that newer core releases will work fine with
Linux and that we will decode the event information properly on new
core releases.

[ balbi@ti.com : improve commit log a bit ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: media: gspca: sn9c20x: add ID for Genius Look 1320 V2

commit 61f0319193c44adbbada920162d880b1fdb3aeb3 upstream.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: omap3isp: preview: Fix the crop margins

commit 8b57b9669aa884ac75b8d09c251d6b1755533c15 upstream.

Commit 3fdfedaaa "[media] omap3isp: preview: Lower the crop margins"
accidentally changed the previewer's cropping, causing the previewer
to miss four pixels on each line, thus corrupting the final image.
Restored the removed setting.

Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: saa7134: fix WARN_ON during resume

commit 30d652823de5fd7907d40e969a2d8e23938d8d03 upstream.

Do not attempt to reload the tuner modules when resuming after a suspend.
This triggers a WARN_ON in kernel/kmod.c:148 __request_module.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581.

This has always been wrong, but it was never noticed until the WARN_ON
was added in 3.9.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: fix PCTV 290e LNA oops

commit 3ec40dcfb413214b2874aec858870502b61c2202 upstream.

Pointer to device state has been moved to different location during
some change. PCTV 290e LNA function still uses old pointer, carried
over FE priv, and it crash.

Reported-by: Janne Kujanpää <jikuja@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: m88rs2000: add caps FE_CAN_INVERSION_AUTO

commit 3c8023a782964c72574ad8268ba0ea4e2d9772fc upstream.

The m88rs2000 frontend is always auto inversion.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: m88rs2000: prevent frontend crash on continuous transponder scans

commit 8272d0a0c0d374a01721e579df6e8add5577132b upstream.

Add m88rs2000_get_tune_settings, min delay of 2000 ms on symbol
rate more than 3000000 and delay of 3000ms less than this.

Adding min delay prevents crashing the frontend on continuous
transponder scans. Other dvb_frontend_tune_settings remain as default.

This makes very little time difference to good channel scans, but slows down
the set frontend where lock can never be achieved i.e. DVB-S2.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-compat-ioctl32: fix wrong VIDIOC_SUBDEV_G/S_EDID32 support

commit bc826d6e39fe5f09cbadf8723e9183e6331b586f upstream.

The wrong ioctl numbers were used due to a copy-and-paste error.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uvcvideo: Do not use usb_set_interface on bulk EP

commit b1e43f232698274871e1358c276d7b0242a7d607 upstream.

The UVC specification uses alternate setting selection to notify devices
of stream start/stop. This breaks when using bulk-based devices, as the
video streaming interface has a single alternate setting in that case,
making video stream start and video stream stop events to appear
identical to the device. Bulk-based devices are thus not well supported
by UVC.

The webcam built in the Asus Zenbook UX302LA ignores the set interface
request and will keep the video stream enabled when the driver tries to
stop it. If USB autosuspend is enabled the device will then be suspended
and will crash, requiring a cold reboot.

USB trace capture showed that Windows sends a CLEAR_FEATURE(HALT)
request to the bulk endpoint when stopping the stream instead of
selecting alternate setting 0. The camera then behaves correctly, and
thus seems to require that behaviour.

Replace selection of alternate setting 0 with clearing of the endpoint
halt feature at video stream stop for bulk-based devices. Let's refrain
from blaming Microsoft this time, as it's not clear whether this
Windows-specific but USB-compliant behaviour was specifically developed
to handle bulkd-based UVC devices, or if the camera just took advantage
of it.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM

commit 01bb59ebffdec314da8da66266edf29529372f9b upstream.

When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this
warning:
drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined
but not used [-Wunused-function]

Instead of creating nested #ifdefs, this patch fixes it by defining the
xHCI PCI stubs as inline.

This warning has been in since 3.2 kernel and was
caused by commit 421aa841a134f6a743111cf44d0c6d3b45e3cf8c
"usb/xhci: hide MSI code behind PCI bars", but wasn't noticed
until 3.13 when a configuration with these options was tried

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: extend quirk for Renesas cards

commit 6db249ebefc6bf5c39f35dfaacc046d8ad3ffd70 upstream.

After suspend another Renesas PCI-X USB 3.0 card doesn't work.
[root@fedora-20 ~]# lspci -vmnnd 1912:
Device: 03:00.0
Class: USB controller [0c03]
Vendor: Renesas Technology Corp. [1912]
Device: uPD720202 USB 3.0 Host Controller [0015]
SVendor: Renesas Technology Corp. [1912]
SDevice: uPD720202 USB 3.0 Host Controller [0015]
Rev: 02
ProgIf: 30

This patch should be applied to stable kernel 3.14 that contain
the commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d
"xhci: Fix resume issues on Renesas chips in Samsung laptops"

Reported-and-tested-by: Anatoly Kharchenko <rfr-bugs@yandex.ru>
Reference: http://redmine.russianfedora.pro/issues/1315
Signed-off-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Prevent runtime pm from autosuspending during initialization

commit bcffae7708eb8352f44dc510b326541fe43a02a4 upstream.

xHCI driver has its own pci probe function that will call usb_hcd_pci_probe
to register its usb-2 bus, and then continue to manually register the
usb-3 bus. usb_hcd_pci_probe does a pm_runtime_put_noidle at the end and
might thus trigger a runtime suspend before the usb-3 bus is ready.

Prevent the runtime suspend by increasing the usage count in the
beginning of xhci_pci_probe, and decrease it once the usb-3 bus is
ready.

xhci-platform driver is not using usb_hcd_pci_probe to set up
busses and should not need to have it's usage count increased during probe.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: zero: Fix SuperSpeed enumeration for alternate setting 1

commit 9c1b70361e0b38e4acb8e62b54da66538cb77ff2 upstream.

It was impossible to enumerate on a SuperSpeed (XHCI) host
with alternate setting = 1 due to the wrongly set 'bMaxBurst'
field in the SuperSpeed Endpoint Companion descriptor.

Testcase:
<host> modprobe -r usbtest; modprobe usbtest alt=1
<device> modprobe g_zero
plug device to SuperSpeed port on the host.

Without this patch the host always complains like so
"usb 12-2: Not enough bandwidth for new device state.
 usb 12-2: Not enough bandwidth for altsetting 1"

Bug was introduced by commit cf9a08ae in v3.9

Fixes: cf9a08ae5aec (usb: gadget: convert source sink and loopback to
new function interface)

Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: tcm_usb_gadget: stop format strings

commit aba37fd975f0dd58e025c99c2a79b61b20190831 upstream.

This makes sure that the name coming out of configfs cannot be used
accidentally as a format string.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: fix race in readdir

commit 01d8885785a60ae8f4c37b0ed75bdc96d0fc6a44 upstream.

jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2)

The -ENOENT is due to readdir calling dir_emit on the same entry twice.

If the dir_emit callback sleeps and the tree is changed underneath us,
we won't be able to trust deh_offset(deh) anymore. We need to save
next_pos before we might sleep so we can find the next entry.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi: Correct EFI boot stub use of code32_start

commit 7e8213c1f3acc064aef37813a39f13cbfe7c3ce7 upstream.

code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.

The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.

Reported-by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/tcm_fc: Fix use-after-free of ft_tpg

commit 2c42be2dd4f6586728dba5c4e197afd5cfaded78 upstream.

ft_del_tpg checks tpg->tport is set before unlinking the tpg from the
tport when the tpg is being removed. Set this pointer in ft_tport_create,
or the unlinking won't happen in ft_del_tpg and tport->tpg will reference
a deleted object.

This patch sets tpg->tport in ft_tport_create, because that's what
ft_del_tpg checks, and is the only way to get back to the tport to
clear tport->tpg.

The bug was occuring when:

- lport created, tport (our per-lport, per-provider context) is
  allocated.
  tport->tpg = NULL
- tpg created
- a PRLI is received. ft_tport_create is called, tpg is found and
  tport->tpg is set
- tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not
  set, tport->tpg is not cleared and points at freed memory
- Future calls to ft_tport_create return tport via first conditional,
  instead of searching for new tpg by calling ft_lport_find_tpg.
  tport->tpg is still invalid, and will access freed memory.

see https://bugzilla.redhat.com/show_bug.cgi?id=1071340

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug

commit d444edc679e7713412f243b792b1f964e5cff1e1 upstream.

This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message()
where during ERL=2 connection recovery, a bogus conn_p pointer could
end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION
notifying the initiator that cmd->logout_cid has failed.

The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with
a bogus conn_p pointer in iscsit_build_conn_drop_async_message().

Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: arcmsr: upper 32 of dma address lost

commit e2c70425f05219b142b3a8a9489a622c736db39d upstream.

The original code always set the upper 32 bits to zero because it was
doing a shift of the wrong variable.

Fixes: 1a4f550a09f8 ('[SCSI] arcmsr: 1.20.00.15: add SATA RAID plus other fixes')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: qla2xxx: fix error handling of qla2x00_mem_alloc()

commit b2a72ec32d0f499aaadf41264232517a12326df0 upstream.

qla2x00_mem_alloc() returns 1 on success and -ENOMEM on failure.  On the
one hand the caller assumes non-zero is success but on the other hand
the caller also assumes that it returns an error code.

I've fixed it to return zero on success and a negative error code on
failure.  This matches the documentation as well.

[jejb: checkpatch fix]
Fixes: e315cd28b9ef ('[SCSI] qla2xxx: Code changes for qla data structure refactoring')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ib_srpt: Use correct ib_sg_dma primitives

commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream.

The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().

This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.

Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Vinod Kumar <vinod.kumar@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ehca: Returns an error on ib_copy_to_udata() failure

commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream.

In case of error when writing to userspace, function ehca_create_cq()
does not set an error code before following its error path.

This patch sets the error code to -EFAULT when ib_copy_to_udata()
fails.

This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mthca: Return an error on ib_copy_to_udata() failure

commit 08e74c4b00c30c232d535ff368554959403d0432 upstream.

In case of error when writing to userspace, the function mthca_create_cq()
does not set an error code before following its error path.

This patch sets the error code to -EFAULT when ib_copy_to_udata() fails.

This was caught when using spatch (aka. coccinelle)
to rewrite call to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/nes: Return an error on ib_copy_from_udata() failure instead of NULL

commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream.

In case of error while accessing to userspace memory, function
nes_create_qp() returns NULL instead of an error code wrapped through
ERR_PTR().  But NULL is not expected by ib_uverbs_create_qp(), as it
check for error with IS_ERR().

As page 0 is likely not mapped, it is going to trigger an Oops when
the kernel will try to dereference NULL pointer to access to struct
ib_qp's fields.

In some rare cases, page 0 could be mapped by userspace, which could
turn this bug to a vulnerability that could be exploited: the function
pointers in struct ib_device will be under userspace total control.

This was caught when using spatch (aka. coccinelle)
to rewrite calls to ib_copy_{from,to}_udata().

Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null
Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci
Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipath: Fix potential buffer overrun in sending diag packet routine

commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream.

Guard against a potential buffer overrun.  The size to read from the
user is passed in, and due to the padding that needs to be taken into
account, as well as the place holder for the ICRC it is possible to
overflow the 32bit value which would cause more data to be copied from
user space than is allocated in the buffer.

Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: set timeparms.to_maxval in setup_callback_client

commit 3758cf7e14b753838fe754ede3862af10b35fdac upstream.

...otherwise the logic in the timeout handling doesn't work correctly.

Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSD: Traverse unconfirmed client through hash-table

commit 2b9056359889c78ea5decb5b654a512c2e8a945c upstream.

When stopping nfsd, I got BUG messages, and soft lockup messages,
The problem is cuased by double rb_erase() in nfs4_state_destroy_net()
and destroy_client().

This patch just let nfsd traversing unconfirmed client through
hash-table instead of rbtree.

[ 2325.021995] BUG: unable to handle kernel NULL pointer dereference at
          (null)
[ 2325.022809] IP: [<ffffffff8133c18c>] rb_erase+0x14c/0x390
[ 2325.022982] PGD 7a91b067 PUD 7a33d067 PMD 0
[ 2325.022982] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 2325.022982] Modules linked in: nfsd(OF) cfg80211 rfkill bridge stp
llc snd_intel8x0 snd_ac97_codec ac97_bus auth_rpcgss nfs_acl serio_raw
e1000 i2c_piix4 ppdev snd_pcm snd_timer lockd pcspkr joydev parport_pc
snd parport i2c_core soundcore microcode sunrpc ata_generic pata_acpi
[last unloaded: nfsd]
[ 2325.022982] CPU: 1 PID: 2123 Comm: nfsd Tainted: GF          O
3.14.0-rc8+ #2
[ 2325.022982] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 2325.022982] task: ffff88007b384800 ti: ffff8800797f6000 task.ti:
ffff8800797f6000
[ 2325.022982] RIP: 0010:[<ffffffff8133c18c>]  [<ffffffff8133c18c>]
rb_erase+0x14c/0x390
[ 2325.022982] RSP: 0018:ffff8800797f7d98  EFLAGS: 00010246
[ 2325.022982] RAX: ffff880079c1f010 RBX: ffff880079f4c828 RCX:
0000000000000000
[ 2325.022982] RDX: 0000000000000000 RSI: ffff880079bcb070 RDI:
ffff880079f4c810
[ 2325.022982] RBP: ffff8800797f7d98 R08: 0000000000000000 R09:
ffff88007964fc70
[ 2325.022982] R10: 0000000000000000 R11: 0000000000000400 R12:
ffff880079f4c800
[ 2325.022982] R13: ffff880079bcb000 R14: ffff8800797f7da8 R15:
ffff880079f4c860
[ 2325.022982] FS:  0000000000000000(0000) GS:ffff88007f900000(0000)
knlGS:0000000000000000
[ 2325.022982] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2325.022982] CR2: 0000000000000000 CR3: 000000007a3ef000 CR4:
00000000000006e0
[ 2325.022982] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 2325.022982] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 2325.022982] Stack:
[ 2325.022982]  ffff8800797f7de0 ffffffffa0191c6e ffff8800797f7da8
ffff8800797f7da8
[ 2325.022982]  ffff880079f4c810 ffff880079bcb000 ffffffff81cc26c0
ffff880079c1f010
[ 2325.022982]  ffff880079bcb070 ffff8800797f7e28 ffffffffa01977f2
ffff8800797f7df0
[ 2325.022982] Call Trace:
[ 2325.022982]  [<ffffffffa0191c6e>] destroy_client+0x32e/0x3b0 [nfsd]
[ 2325.022982]  [<ffffffffa01977f2>] nfs4_state_shutdown_net+0x1a2/0x220
[nfsd]
[ 2325.022982]  [<ffffffffa01700b8>] nfsd_shutdown_net+0x38/0x70 [nfsd]
[ 2325.022982]  [<ffffffffa017013e>] nfsd_last_thread+0x4e/0x80 [nfsd]
[ 2325.022982]  [<ffffffffa001f1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc]
[ 2325.022982]  [<ffffffffa017064b>] nfsd_destroy+0x5b/0x80 [nfsd]
[ 2325.022982]  [<ffffffffa0170773>] nfsd+0x103/0x130 [nfsd]
[ 2325.022982]  [<ffffffffa0170670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 2325.022982]  [<ffffffff810a8232>] kthread+0xd2/0xf0
[ 2325.022982]  [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 2325.022982]  [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0
[ 2325.022982]  [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[ 2325.022982] Code: 48 83 e1 fc 48 89 10 0f 84 02 01 00 00 48 3b 41 10
0f 84 08 01 00 00 48 89 51 08 48 89 fa e9 74 ff ff ff 0f 1f 40 00 48 8b
50 10 <f6> 02 01 0f 84 93 00 00 00 48 8b 7a 10 48 85 ff 74 05 f6 07 01
[ 2325.022982] RIP  [<ffffffff8133c18c>] rb_erase+0x14c/0x390
[ 2325.022982]  RSP <ffff8800797f7d98>
[ 2325.022982] CR2: 0000000000000000
[ 2325.022982] ---[ end trace 28c27ed011655e57 ]---

[  228.064071] BUG: soft lockup - CPU#0 stuck for 22s! [nfsd:558]
[  228.064428] Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211
xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc
ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6
nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw
ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security
iptable_raw nfsd(OF) auth_rpcgss nfs_acl lockd snd_intel8x0
snd_ac97_codec ac97_bus joydev snd_pcm snd_timer e1000 sunrpc snd ppdev
parport_pc serio_raw pcspkr i2c_piix4 microcode parport soundcore
i2c_core ata_generic pata_acpi
[  228.064539] CPU: 0 PID: 558 Comm: nfsd Tainted: GF          O
3.14.0-rc8+ #2
[  228.064539] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[  228.064539] task: ffff880076adec00 ti: ffff880074616000 task.ti:
ffff880074616000
[  228.064539] RIP: 0010:[<ffffffff8133ba17>]  [<ffffffff8133ba17>]
rb_next+0x27/0x50
[  228.064539] RSP: 0018:ffff880074617de0  EFLAGS: 00000282
[  228.064539] RAX: ffff880074478010 RBX: ffff88007446f860 RCX:
0000000000000014
[  228.064539] RDX: ffff880074478010 RSI: 0000000000000000 RDI:
ffff880074478010
[  228.064539] RBP: ffff880074617de0 R08: 0000000000000000 R09:
0000000000000012
[  228.064539] R10: 0000000000000001 R11: ffffffffffffffec R12:
ffffea0001d11a00
[  228.064539] R13: ffff88007f401400 R14: ffff88007446f800 R15:
ffff880074617d50
[  228.064539] FS:  0000000000000000(0000) GS:ffff88007f800000(0000)
knlGS:0000000000000000
[  228.064539] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  228.064539] CR2: 00007fe9ac6ec000 CR3: 000000007a5d6000 CR4:
00000000000006f0
[  228.064539] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[  228.064539] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[  228.064539] Stack:
[  228.064539]  ffff880074617e28 ffffffffa01ab7db ffff880074617df0
ffff880074617df0
[  228.064539]  ffff880079273000 ffffffff81cc26c0 ffffffff81cc26c0
0000000000000000
[  228.064539]  0000000000000000 ffff880074617e48 ffffffffa01840b8
ffffffff81cc26c0
[  228.064539] Call Trace:
[  228.064539]  [<ffffffffa01ab7db>] nfs4_state_shutdown_net+0x18b/0x220
[nfsd]
[  228.064539]  [<ffffffffa01840b8>] nfsd_shutdown_net+0x38/0x70 [nfsd]
[  228.064539]  [<ffffffffa018413e>] nfsd_last_thread+0x4e/0x80 [nfsd]
[  228.064539]  [<ffffffffa00aa1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc]
[  228.064539]  [<ffffffffa018464b>] nfsd_destroy+0x5b/0x80 [nfsd]
[  228.064539]  [<ffffffffa0184773>] nfsd+0x103/0x130 [nfsd]
[  228.064539]  [<ffffffffa0184670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[  228.064539]  [<ffffffff810a8232>] kthread+0xd2/0xf0
[  228.064539]  [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[  228.064539]  [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0
[  228.064539]  [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40
[  228.064539] Code: 1f 44 00 00 55 48 8b 17 48 89 e5 48 39 d7 74 3b 48
8b 47 08 48 85 c0 75 0e eb 25 66 0f 1f 84 00 00 00 00 00 48 89 d0 48 8b
50 10 <48> 85 d2 75 f4 5d c3 66 90 48 3b 78 08 75 f6 48 8b 10 48 89 c7

Fixes: ac55fdc408039 (nfsd: move the confirmed and unconfirmed hlists...)
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix setclientid encode size

commit 480efaee085235bb848f1063f959bf144103c342 upstream.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: check passed socket's net matches NFSd superblock's one

commit 3064639423c48d6e0eb9ecc27c512a58e38c6c57 upstream.

There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:

"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.

This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.

v2: Put socket on exit.

Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: notify_change needs elevated write count

commit 9f67f189939eccaa54f3d2c9cf10788abaf2d584 upstream.

Looks like this bug has been here since these write counts were
introduced, not sure why it was just noticed now.

Thanks also to Jan Kara for pointing out the problem.

Reported-by: Matthew Rahtz <mrahtz@rapitasystems.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix test_stateid error reply encoding

commit a11fcce1544df08c723d950ff0edef3adac40405 upstream.

If the entire operation fails then there's nothing to encode.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: buffer-length check for SUPPATTR_EXCLCREAT

commit de3997a7eeb9ea286b15879fdf8a95aae065b4f7 upstream.

This was an omission from 8c18f2052e756e7d5dea712fc6e7ed70c00e8a39
"nfsd41: SUPPATTR_EXCLCREAT attribute".

Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: session needs room for following op to error out

commit 4c69d5855a16f7378648c5733632628fa10431db upstream.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: querying buffer scan_mask should return 0/1

commit 2076a20fc1a06f7b0333c62a2bb4eeeac7ed1bcb upstream.

Ensure that querying the IIO buffer scan_mask returns a value of
0 or 1. Currently querying the scan mask has the value returned
by test_bit(), which returns either true or false. For some
architectures test_bit() may return -1 for true, which will appear
to return an error when returning from iio_scan_mask_query().

Additionally, it's important for the sysfs interface to consistently
return the same thing when querying the scan_mask.

Signed-off-by: Alec Berg <alecaberg@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: fix crash during hotplug of PCI USB controller card

commit a2ff864b53eac9a0e9b05bfe9d1781ccd6c2af71 upstream.

The code in hcd-pci.c that matches up EHCI controllers with their
companion UHCI or OHCI controllers assumes that the private drvdata
fields don't get set too early.  However, it turns out that this field
gets set by usb_create_hcd(), before hcd-pci expects it, and this can
result in a crash when two controllers are probed in parallel (as can
happen when a new controller card is hotplugged).

The companions_rwsem lock was supposed to prevent this sort of thing,
but usb_create_hcd() is called outside the scope of the rwsem.

A simple solution is to check that the root-hub pointer has been
initialized as well as the drvdata field.  This doesn't happen until
usb_add_hcd() is called; that call and the check are both protected by
the rwsem.

This patch should be applied to stable kernels from 3.10 onward.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stefani Seibold <stefani@seibold.net>
Tested-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

commit b3b42ac2cbae1f3cecbb6229964a4d48af31d382 upstream.

The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  We have
a software workaround for that ("espfix") for the 32-bit kernel, but
it relies on a nonzero stack segment base which is not available in
32-bit mode.

Since 16-bit support is somewhat crippled anyway on a 64-bit kernel
(no V86 mode), and most (if not quite all) 64-bit processors support
virtualization for the users who really need it, simply reject
attempts at creating a 16-bit segment when running on top of a 64-bit
kernel.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace/x86: One more missing sync after fixup of function modification failure

commit 12729f14d8357fb845d75155228b21e76360272d upstream.

If a failure occurs while modifying ftrace function, it bails out and will
remove the tracepoints to be back to what the code originally was.

There is missing the final sync run across the CPUs after the fix up is done
and before the ftrace int3 handler flag is reset.

Here's the description of the problem:

CPU0 CPU1
---- ----
  remove_breakpoint();
  modifying_ftrace_code = 0;

[still sees breakpoint]
<takes trap>
[sees modifying_ftrace_code as zero]
[no breakpoint handler]
[goto failed case]
[trap exception - kernel breakpoint, no
 handler]
BUG()

Link: http://lkml.kernel.org/r/1393258342-29978-2-git-send-email-pmladek@suse.cz
Fixes: 8a4d0a687a5 "ftrace: Use breakpoint method to update ftrace caller"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix directory hash ordering bug

commit c88547a8119e3b581318ab65e9b72f27f23e641d upstream.

Commit f5ea1100 ("xfs: add CRCs to dir2/da node blocks") introduced
in 3.10 incorrectly converted the btree hash index array pointer in
xfs_da3_fixhashpath(). It resulted in the the current hash always
being compared against the first entry in the btree rather than the
current block index into the btree block's hash entry array. As a
result, it was comparing the wrong hashes, and so could misorder the
entries in the btree.

For most cases, this doesn't cause any problems as it requires hash
collisions to expose the ordering problem. However, when there are
hash collisions within a directory there is a very good probability
that the entries will be ordered incorrectly and that actually
matters when duplicate hashes are placed into or removed from the
btree block hash entry array.

This bug results in an on-disk directory corruption and that results
in directory verifier functions throwing corruption warnings into
the logs. While no data or directory entries are lost, access to
them may be compromised, and attempts to remove entries from a
directory that has suffered from this corruption may result in a
filesystem shutdown.  xfs_repair will fix the directory hash
ordering without data loss occuring.

[dchinner: wrote useful a commit message]

Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Fix case where ethtype was never obtained and always be checked against 0

commit f764cd68d9036498f08fe8834deb6a367b5c2542 upstream.

Zero-initializing ether_type masked that the ether type would never be
obtained for 8021x packets and the comparison against eapol_type
would always fail.

Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>