firefly-linux-kernel-4.4.55.git
13 years agopowerpc: Fix corruption when grabbing FWNMI data
Anton Blanchard [Tue, 11 Jan 2011 19:50:51 +0000 (19:50 +0000)]
powerpc: Fix corruption when grabbing FWNMI data

The FWNMI code uses a global buffer without any locks to read the RTAS error
information. If two CPUs take a machine check at once then we will corrupt
this buffer.

Since most FWNMI rtas messages are not of the extended type, we can create a
64bit percpu buffer and use it where possible. If we do receive an extended
RTAS log then we fall back to the old behaviour of using the global buffer.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Rework pseries machine check handler
Anton Blanchard [Tue, 11 Jan 2011 19:49:19 +0000 (19:49 +0000)]
powerpc: Rework pseries machine check handler

Rework pseries machine check handler:

- If MSR_RI isn't set, we cannot recover even if the machine check was fully
  recovered

- Rename nonfatal to recovered

- Handle RTAS_DISP_LIMITED_RECOVERY

- Use BUS_MCEERR_AR instead of BUS_ADRERR

- Don't check all the RTAS error log fields when receiving a synchronous
  machine check. Recent versions of the pseries firmware do not fill them
  in during a machine check and instead send a follow up error log with
  the detailed information. If we see a synchronous machine check, and we
  came from userspace then kill the task.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Don't silently handle machine checks from userspace
Anton Blanchard [Tue, 11 Jan 2011 19:48:14 +0000 (19:48 +0000)]
powerpc: Don't silently handle machine checks from userspace

If a machine check comes from userspace we send a SIGBUS to the task and
fail to printk anything.

If we are taking machine checks due to bad hardware we want to know about
it right away. Furthermore if we don't complain loudly then it will look
a lot like a bug in the userspace application, potentially causing a lot
of confusion.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Remove duplicate debugger hook in machine_check_exception
Anton Blanchard [Tue, 11 Jan 2011 19:47:20 +0000 (19:47 +0000)]
powerpc: Remove duplicate debugger hook in machine_check_exception

We are calling debugger_fault_handler twice in machine_check_exception.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Never halt RTAS error logging after receiving an unrecoverable machine check
Anton Blanchard [Tue, 11 Jan 2011 19:46:29 +0000 (19:46 +0000)]
powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check

Newer versions of the System p firwmare send a partial RTAS error log in the
machine check handler with a more detailed response appearing sometime later
via check event.

This means at machine check time we do not have enough information to
ascertain exactly what went on. Furthermore, I have found the RTAS error
logs in the machine check handler contain no useful information, so halting on
them makes little sense. If we want to halt it would make more sense to do
it following the error log received sometime later via check event.

In light of this, never halt the error log in the pseries machine
check handler.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Don't force MSR_RI in machine_check_exception
Anton Blanchard [Tue, 11 Jan 2011 19:45:31 +0000 (19:45 +0000)]
powerpc: Don't force MSR_RI in machine_check_exception

We should never force MSR_RI on. If we take a machine check with MSR_RI off
then we have no chance of recovering safely.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Print 32 bits of DSISR in show_regs
Anton Blanchard [Tue, 11 Jan 2011 19:44:30 +0000 (19:44 +0000)]
powerpc: Print 32 bits of DSISR in show_regs

We were printing 64 bits of DSISR in show_regs even though it is 32 bit.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kdump: Disable ftrace during kexec
Anton Blanchard [Thu, 6 Jan 2011 18:00:36 +0000 (18:00 +0000)]
powerpc/kdump: Disable ftrace during kexec

We should disable ftrace during kexec, some of the tracers are very invasive
and we do not want them going off while doing the low level work of swapping
one kernel out for another. This mirrors what we do on x86.

Even though we cannot return from a kexec on powerpc (since we do not implement
CONFIG_KEXEC_JUMP), add the restore code in case we do one day.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler
Anton Blanchard [Fri, 21 Jan 2011 02:43:59 +0000 (13:43 +1100)]
powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler

Use the crash handler hooks to run the SPU stop code, just like we do for
ehea and cell RAS code.

While I'm here I noticed "CPUSs reliabally"

so fix the spelling MISTAKESs reliabally.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kexec: Remove empty ppc_md.machine_kexec_prepare
Anton Blanchard [Thu, 6 Jan 2011 17:58:36 +0000 (17:58 +0000)]
powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare

We check for a valid handler before calling ppc_md.machine_kexec_prepare
so we can just remove these empty handlers.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kexec: Don't initialise kexec hooks to default handlers
Anton Blanchard [Thu, 6 Jan 2011 17:57:03 +0000 (17:57 +0000)]
powerpc/kexec: Don't initialise kexec hooks to default handlers

There's no need to initialise ppc_md.machine_kexec and
ppc_md.machine_kexec_prepare to the default handlers.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kdump: Remove ppc_md.machine_crash_shutdown
Anton Blanchard [Thu, 6 Jan 2011 17:56:09 +0000 (17:56 +0000)]
powerpc/kdump: Remove ppc_md.machine_crash_shutdown

No one uses ppc_md.machine_crash_shutdown, so remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kexec: Remove ppc_md.machine_kexec
Anton Blanchard [Thu, 6 Jan 2011 17:55:36 +0000 (17:55 +0000)]
powerpc/kexec: Remove ppc_md.machine_kexec

No one uses ppc_md.machine_kexec, so remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kexec: Remove ppc_md.machine_kexec_cleanup
Anton Blanchard [Thu, 6 Jan 2011 17:54:58 +0000 (17:54 +0000)]
powerpc/kexec: Remove ppc_md.machine_kexec_cleanup

No one uses ppc_md.machine_kexec_cleanup, so remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/kexec: Move all ppc_md kexec function pointers together
Anton Blanchard [Thu, 6 Jan 2011 17:54:15 +0000 (17:54 +0000)]
powerpc/kexec: Move all ppc_md kexec function pointers together

Move all the kexec handlers together.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/cell: Use system_wq in cpufreq_spudemand
Tejun Heo [Mon, 3 Jan 2011 03:49:25 +0000 (03:49 +0000)]
powerpc/cell: Use system_wq in cpufreq_spudemand

With cmwq, there's no reason to use a separate workqueue in
cpufreq_spudemand.  Use system_wq instead.  The work items are already
sync canceled on stop, so it's already guaranteed that no work is
running when spu_gov_exit() is entered.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Dave Jones <davej@redhat.com>
Cc: cpufreq@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/macintosh: Fix wrong test in fan_{read,write}_reg()
roel kluin [Fri, 31 Dec 2010 04:57:46 +0000 (04:57 +0000)]
powerpc/macintosh: Fix wrong test in fan_{read,write}_reg()

Fix error test in fan_{read,write}_reg()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/rtas_flash: Use simple_read_from_buffer
Akinobu Mita [Fri, 24 Dec 2010 20:03:59 +0000 (20:03 +0000)]
powerpc/rtas_flash: Use simple_read_from_buffer

Simplify read file operation for /proc/powerpc/rtas/* interface
by using simple_read_from_buffer.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/spufs: Use simple_write_to_buffer
Akinobu Mita [Fri, 24 Dec 2010 20:03:56 +0000 (20:03 +0000)]
powerpc/spufs: Use simple_write_to_buffer

Simplify several write fileoperations for spufs by using
simple_write_to_buffer().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/ppc32/tracing: Add stack frame to calls of trace_hardirqs_on/off
Steven Rostedt [Wed, 22 Dec 2010 16:42:56 +0000 (16:42 +0000)]
powerpc/ppc32/tracing: Add stack frame to calls of trace_hardirqs_on/off

32-bit variant of the previous patch for 64-bit:

<<
    When an interrupt occurs in userspace, we can call trace_hardirqs_on/off()
    With one level stack. But if we have irqsoff tracing enabled,
    it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call
    goes two stack frames up. If this is from user space, then there may
    not exist a second stack....
>>

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off
Steven Rostedt [Thu, 23 Dec 2010 19:46:06 +0000 (19:46 +0000)]
powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off

    When an interrupt occurs in userspace, we can call trace_hardirqs_on/off()
    With one level stack. But if we have irqsoff tracing enabled,
    it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call
    goes two stack frames up. If this is from user space, then there may
    not exist a second stack.

    Add a second stack when calling trace_hardirqs_on/off() otherwise
    the following oops might occur:

    Oops: Kernel access of bad area, sig: 11 [#1]
    PREEMPT SMP NR_CPUS=2 PA Semi PWRficient
    last sysfs file: /sys/block/sda/size
    Modules linked in: ohci_hcd ehci_hcd usbcore
    NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440
    REGS: c00000003e2f3af0 TRAP: 0300   Not tainted  (2.6.37-rc6+)
    MSR: 9000000000001032 <ME,IR,DR>  CR: 48044444  XER: 20000000
    DAR: 00000001ffb9db50, DSISR: 0000000040000000
    TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1
    GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8
    GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000
    GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000
    GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008
    GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950
    GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000
    GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38
    GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70
    NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0
    LR [c0000000000034d4] decrementer_common+0xd4/0x100
    Call Trace:
    [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable)
    [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100
    Instruction dump:
    81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000
    80030000 e92a0000 eb6301f8 2f800000 <eb89001041fe00dc a06d000a eb1e8050
    ---[ end trace 4ec7fd2be9240928 ]---

Reported-by: Joerg Sommer <joerg@alea.gnuu.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agopowerpc: Ensure the else case of feature sections will fit
Michael Ellerman [Sun, 7 Nov 2010 18:22:29 +0000 (18:22 +0000)]
powerpc: Ensure the else case of feature sections will fit

When we create an alternative feature section, the else case must be the
same size or smaller than the body. This is because when we patch the
else case in we just overwrite the body, so there must be room.

Up to now we just did this by inspection, but it's quite easy to enforce
it in the assembler, so we should.

The only change is to add the ifgt block, but that effects the alignment
of the tabs and so the whole macro is modified.

Also add a test, but #if 0 it because we don't want to break the build.
Anyone who's modifying the feature macros should enable the test.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
13 years agoMerge remote branch 'kumar/next' into merge
Benjamin Herrenschmidt [Fri, 21 Jan 2011 00:00:44 +0000 (11:00 +1100)]
Merge remote branch 'kumar/next' into merge

13 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 20 Jan 2011 04:27:25 +0000 (20:27 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Unify "numa=" command line option handling
  Revert "x86: Make relocatable kernel work with new binutils"

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 20 Jan 2011 04:25:45 +0000 (20:25 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits)
  sctp: user perfect name for Delayed SACK Timer option
  net: fix can_checksum_protocol() arguments swap
  Revert "netlink: test for all flags of the NLM_F_DUMP composite"
  gianfar: Fix misleading indentation in startup_gfar()
  net/irda/sh_irda: return to RX mode when TX error
  net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.
  USB CDC NCM: tx_fixup() race condition fix
  ns83820: Avoid bad pointer deref in ns83820_init_one().
  ipv6: Silence privacy extensions initialization
  bnx2x: Update bnx2x version to 1.62.00-4
  bnx2x: Fix AER setting for BCM57712
  bnx2x: Fix BCM84823 LED behavior
  bnx2x: Mark full duplex on some external PHYs
  bnx2x: Fix BCM8073/BCM8727 microcode loading
  bnx2x: LED fix for BCM8727 over BCM57712
  bnx2x: Common init will be executed only once after POR
  bnx2x: Swap BCM8073 PHY polarity if required
  iwlwifi: fix valid chain reading from EEPROM
  ath5k: fix locking in tx_complete_poll_work
  ath9k_hw: do PA offset calibration only on longcal interval
  ...

13 years agosctp: user perfect name for Delayed SACK Timer option
Shan Wei [Tue, 18 Jan 2011 22:39:00 +0000 (22:39 +0000)]
sctp: user perfect name for Delayed SACK Timer option

The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK,
not SCTP_DELAYED_ACK.

Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK,
for making compatibility with existing applications.

Reference:
8.1.19.  Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK)
(http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25)

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: fix can_checksum_protocol() arguments swap
Eric Dumazet [Wed, 19 Jan 2011 00:51:36 +0000 (00:51 +0000)]
net: fix can_checksum_protocol() arguments swap

commit 0363466866d901fbc (net offloading: Convert checksums to use
centrally computed features.) mistakenly swapped can_checksum_protocol()
arguments.

This broke IPv6 on bnx2 for instance, on NIC without TCPv6 checksum
offloads.

Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoRevert "netlink: test for all flags of the NLM_F_DUMP composite"
David S. Miller [Tue, 18 Jan 2011 20:40:38 +0000 (12:40 -0800)]
Revert "netlink: test for all flags of the NLM_F_DUMP composite"

This reverts commit 0ab03c2b1478f2438d2c80204f7fef65b1bca9cf.

It breaks several things including the avahi daemon.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agox86: Unify "numa=" command line option handling
Jan Beulich [Wed, 19 Jan 2011 08:57:21 +0000 (08:57 +0000)]
x86: Unify "numa=" command line option handling

In order to be able to suppress the use of SRAT tables that
32-bit Linux can't deal with (in one case known to lead to a
non-bootable system, unless disabling ACPI altogether), move the
"numa=" option handling to common code.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoRevert "x86: Make relocatable kernel work with new binutils"
Ingo Molnar [Wed, 19 Jan 2011 09:09:42 +0000 (10:09 +0100)]
Revert "x86: Make relocatable kernel work with new binutils"

This reverts commit 86b1e8dd83cb ("x86: Make relocatable kernel work with
new binutils").

Markus Trippelsdorf reported a boot failure caused by this patch.

The real solution to the original patch will likely involve an
arch-generic solution to define an overlaid jiffies_64 and jiffies
variables.

Until that's done and tested on all architectures revert this commit to
solve the regression.

Reported-and-bisected-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <4D36A759.60704@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agogianfar: Fix misleading indentation in startup_gfar()
Anton Vorontsov [Tue, 18 Jan 2011 02:36:02 +0000 (02:36 +0000)]
gianfar: Fix misleading indentation in startup_gfar()

Just stumbled upon the issue while looking for another bug.

The code looks correct, the indentation is not.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/irda/sh_irda: return to RX mode when TX error
Kuninori Morimoto [Thu, 13 Jan 2011 21:47:42 +0000 (21:47 +0000)]
net/irda/sh_irda: return to RX mode when TX error

sh_irda can not use RX/TX in same time,
but this driver didn't return to RX mode when TX error occurred.
This patch care xmit error case to solve this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.
Jesse Gross [Mon, 17 Jan 2011 20:46:00 +0000 (20:46 +0000)]
net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.

In netif_skb_features() we return only the features that are valid for vlans
if we have a vlan packet.  However, we should not mask out NETIF_F_HW_VLAN_TX
since it enables transmission of vlan tags and is obviously valid.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoUSB CDC NCM: tx_fixup() race condition fix
Alexey Orishko [Mon, 17 Jan 2011 07:07:25 +0000 (07:07 +0000)]
USB CDC NCM: tx_fixup() race condition fix

- tx_fixup() can be called from either timer callback or from xmit()
  in usbnet, so spinlock is added to avoid concurrency-related problem.
- minor correction due to checkpatch warning for some line over 80
  chars after previous patch was applied.

Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agons83820: Avoid bad pointer deref in ns83820_init_one().
Jesper Juhl [Mon, 17 Jan 2011 10:24:57 +0000 (10:24 +0000)]
ns83820: Avoid bad pointer deref in ns83820_init_one().

In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate
memory via alloc_etherdev(). We then call PRIV() on the returned storage
which is 'return netdev_priv()'. netdev_priv() takes the pointer it is
passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and
returns it. Then we test the resulting pointer for NULL, which it is
unlikely to be at this point, and later dereference it. This will go bad
if alloc_etherdev() actually returned NULL.

This patch reworks the code slightly so that we test for a NULL pointer
(and return -ENOMEM) directly after calling alloc_etherdev().

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Silence privacy extensions initialization
Romain Francoise [Mon, 17 Jan 2011 07:59:18 +0000 (07:59 +0000)]
ipv6: Silence privacy extensions initialization

When a network namespace is created (via CLONE_NEWNET), the loopback
interface is automatically added to the new namespace, triggering a
printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set.

This is problematic for applications which use CLONE_NEWNET as
part of a sandbox, like Chromium's suid sandbox or recent versions of
vsftpd. On a busy machine, it can lead to thousands of useless
"lo: Disabled Privacy Extensions" messages appearing in dmesg.

It's easy enough to check the status of privacy extensions via the
use_tempaddr sysctl, so just removing the printk seems like the most
sensible solution.

Signed-off-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Update bnx2x version to 1.62.00-4
Yaniv Rosner [Tue, 18 Jan 2011 04:33:55 +0000 (04:33 +0000)]
bnx2x: Update bnx2x version to 1.62.00-4

Update bnx2x version to 1.62.00-4

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix AER setting for BCM57712
Yaniv Rosner [Tue, 18 Jan 2011 04:33:52 +0000 (04:33 +0000)]
bnx2x: Fix AER setting for BCM57712

Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM84823 LED behavior
Yaniv Rosner [Tue, 18 Jan 2011 04:33:47 +0000 (04:33 +0000)]
bnx2x: Fix BCM84823 LED behavior

Fix BCM84823 LED behavior which may show on some systems

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Mark full duplex on some external PHYs
Yaniv Rosner [Tue, 18 Jan 2011 04:33:42 +0000 (04:33 +0000)]
bnx2x: Mark full duplex on some external PHYs

Device may show incorrect duplex mode for devices with external PHY

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM8073/BCM8727 microcode loading
Yaniv Rosner [Tue, 18 Jan 2011 04:33:36 +0000 (04:33 +0000)]
bnx2x: Fix BCM8073/BCM8727 microcode loading

Improve microcode loading verification before proceeding to next stage

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: LED fix for BCM8727 over BCM57712
Yaniv Rosner [Tue, 18 Jan 2011 04:33:31 +0000 (04:33 +0000)]
bnx2x: LED fix for BCM8727 over BCM57712

LED on BCM57712+BCM8727 systems requires different settings

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Common init will be executed only once after POR
Yaniv Rosner [Tue, 18 Jan 2011 04:33:24 +0000 (04:33 +0000)]
bnx2x: Common init will be executed only once after POR

Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode.
However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Swap BCM8073 PHY polarity if required
Yaniv Rosner [Tue, 18 Jan 2011 04:33:18 +0000 (04:33 +0000)]
bnx2x: Swap BCM8073 PHY polarity if required

Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoLinux 2.6.38-rc1
Linus Torvalds [Tue, 18 Jan 2011 23:14:02 +0000 (15:14 -0800)]
Linux 2.6.38-rc1

13 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Tue, 18 Jan 2011 22:30:00 +0000 (14:30 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (lm93) Add support for LM94

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 18 Jan 2011 22:29:37 +0000 (14:29 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Validate cpu early in perf_event_alloc()
  perf: Find_get_context: fix the per-cpu-counter check
  perf: Fix contexted inheritance

13 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 18 Jan 2011 22:29:21 +0000 (14:29 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clear irqstack thread_info
  x86: Make relocatable kernel work with new binutils

13 years agoMerge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 18 Jan 2011 22:28:48 +0000 (14:28 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
  MIPS: Malta: enable Cirrus FB console
  MIPS: add CONFIG_VIRTUALIZATION for virtio support
  MIPS: Implement __read_mostly
  MIPS: ath79: add common WMAC device for AR913X based boards
  MIPS: ath79: Add initial support for the Atheros AP81 reference board
  MIPS: ath79: add common SPI controller device
  SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs
  MIPS: ath79: add common GPIO buttons device
  MIPS: ath79: add common watchdog device
  MIPS: ath79: add common GPIO LEDs device
  MIPS: ath79: add initial support for the Atheros PB44 reference board
  MIPS: ath79: utilize the MIPS multi-machine support
  MIPS: ath79: add GPIOLIB support
  MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs
  MIPS: jump label: Add MIPS support.
  MIPS: Use WARN() in uasm for better diagnostics.
  MIPS: Optimize TLB handlers for Octeon CPUs
  MIPS: Add LDX and LWX instructions to uasm.
  MIPS: Use BBIT instructions in TLB handlers
  MIPS: Declare uasm bbit0 and bbit1 functions.
  ...

13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 18 Jan 2011 20:50:19 +0000 (12:50 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

13 years agohwmon: (lm93) Add support for LM94
Guenter Roeck [Mon, 17 Jan 2011 20:48:20 +0000 (12:48 -0800)]
hwmon: (lm93) Add support for LM94

This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
13 years agoiwlwifi: fix valid chain reading from EEPROM
Wey-Yi Guy [Tue, 18 Jan 2011 15:59:13 +0000 (07:59 -0800)]
iwlwifi: fix valid chain reading from EEPROM

When read valid tx/rx chains from EEPROM, there is a bug to use the
tx chain value for both tx and rx, the result of this cause low
receive throughput on 1x2 devices becuase rx will only utilize single
chain instead of two chains

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath5k: fix locking in tx_complete_poll_work
Bob Copeland [Tue, 18 Jan 2011 13:06:43 +0000 (08:06 -0500)]
ath5k: fix locking in tx_complete_poll_work

ath5k_reset must be called with sc->lock.  Since the tx queue
watchdog runs in a workqueue and accesses sc, it's appropriate
to just take the lock over the whole function.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoperf: Validate cpu early in perf_event_alloc()
Oleg Nesterov [Tue, 18 Jan 2011 16:10:32 +0000 (17:10 +0100)]
perf: Validate cpu early in perf_event_alloc()

Starting from perf_event_alloc()->perf_init_event(), the kernel
assumes that event->cpu is either -1 or the valid CPU number.

Change perf_event_alloc() to validate this argument early. This
also means we can remove the similar check in
find_get_context().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: gregkh@suse.de
Cc: stable@kernel.org
LKML-Reference: <20110118161032.GC693@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoperf: Find_get_context: fix the per-cpu-counter check
Oleg Nesterov [Tue, 18 Jan 2011 16:10:08 +0000 (17:10 +0100)]
perf: Find_get_context: fix the per-cpu-counter check

If task == NULL, find_get_context() should always check that cpu
is correct.

Afaics, the bug was introduced by 38a81da2 "perf events: Clean
up pid passing", but even before that commit "&& cpu != -1" was
not exactly right, -ESRCH from find_task_by_vpid() is not
accurate.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: gregkh@suse.de
Cc: stable@kernel.org
LKML-Reference: <20110118161008.GB693@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMIPS: Malta: enable Cirrus FB console
Aurelien Jarno [Tue, 18 Jan 2011 11:20:45 +0000 (12:20 +0100)]
MIPS: Malta: enable Cirrus FB console

While most users of a physical Malta board are using the serial port
as the console, a lot of QEMU users would prefer to interact with a
graphical console. Enable the Cirrus FB support in the Malta default
configuration to make that possible. Note that the default console will
still be the serial port, users have to pass "console=tty0" to the
kernel to use the Cirrus FB.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: add CONFIG_VIRTUALIZATION for virtio support
Aurelien Jarno [Tue, 18 Jan 2011 11:20:44 +0000 (12:20 +0100)]
MIPS: add CONFIG_VIRTUALIZATION for virtio support

Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the
the virtio code there. Used to enable the virtio drivers under QEMU.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2002/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Implement __read_mostly
David Daney [Thu, 14 Oct 2010 19:36:49 +0000 (12:36 -0700)]
MIPS: Implement __read_mostly

Just do what everyone else is doing by placing __read_mostly things in
the .data.read_mostly section.

mips_io_port_base can not be read-only (const) and writable
(__read_mostly) at the same time.  One of them has to go, so I chose
to eliminate the __read_mostly.  It will still get stuck in a portion
of memory that is not adjacent to things that are written, and thus
not be on a dirty cache line, for whatever that is worth.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add common WMAC device for AR913X based boards
Gabor Juhos [Tue, 4 Jan 2011 20:28:29 +0000 (21:28 +0100)]
MIPS: ath79: add common WMAC device for AR913X based boards

Add common platform_device and helper code to make the registration
of the built-in wireless MAC easier on the Atheros AR9130/AR9132
based boards. Also register the WMAC device on the AR81 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>,
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1962/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: Add initial support for the Atheros AP81 reference board
Gabor Juhos [Tue, 4 Jan 2011 20:28:28 +0000 (21:28 +0100)]
MIPS: ath79: Add initial support for the Atheros AP81 reference board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1952/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add common SPI controller device
Gabor Juhos [Tue, 4 Jan 2011 20:28:23 +0000 (21:28 +0100)]
MIPS: ath79: add common SPI controller device

Several boards are using the built-in SPI controller of the
AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device
and helper code to register it. Additionally, the patch registers
the SPI bus on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1956/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoSPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs
Gabor Juhos [Tue, 4 Jan 2011 20:28:22 +0000 (21:28 +0100)]
SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs

The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This
patch implements a driver for that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1960/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add common GPIO buttons device
Gabor Juhos [Tue, 4 Jan 2011 20:28:21 +0000 (21:28 +0100)]
MIPS: ath79: add common GPIO buttons device

Almost all boards have one or more push buttons connected to GPIO lines.
This patch adds common code to register a platform_device for them.

The patch also adds support for the buttons on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add common watchdog device
Gabor Juhos [Tue, 4 Jan 2011 20:28:20 +0000 (21:28 +0100)]
MIPS: ath79: add common watchdog device

All supported SoCs have a built-in hardware watchdog driver. This patch
registers a platform_device for that to make it usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add common GPIO LEDs device
Gabor Juhos [Tue, 4 Jan 2011 20:28:18 +0000 (21:28 +0100)]
MIPS: ath79: add common GPIO LEDs device

Almost all boards have one or more LEDs connected to GPIO lines. This
patch adds common code to register a platform_device for them.

The patch also adds support for the LEDs on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add initial support for the Atheros PB44 reference board
Gabor Juhos [Tue, 4 Jan 2011 20:28:17 +0000 (21:28 +0100)]
MIPS: ath79: add initial support for the Atheros PB44 reference board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1950/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: utilize the MIPS multi-machine support
Gabor Juhos [Tue, 4 Jan 2011 20:28:16 +0000 (21:28 +0100)]
MIPS: ath79: utilize the MIPS multi-machine support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1949/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: ath79: add GPIOLIB support
Gabor Juhos [Tue, 4 Jan 2011 20:28:15 +0000 (21:28 +0100)]
MIPS: ath79: add GPIOLIB support

This patch implements generic GPIO routines for the built-in
GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs
Gabor Juhos [Tue, 4 Jan 2011 20:28:14 +0000 (21:28 +0100)]
MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs

This patch adds initial support for various Atheros SoCs based on the
MIPS 24Kc core. The following models are supported at the moment:

  - AR7130
  - AR7141
  - AR7161
  - AR9130
  - AR9132
  - AR7240
  - AR7241
  - AR7242

The current patch contains minimal support only, but the resulting
kernel can boot into user-space with using of an initramfs image on
various boards which are using these SoCs. Support for more built-in
devices and individual boards will be implemented in further patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1947/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: jump label: Add MIPS support.
David Daney [Tue, 28 Dec 2010 21:26:23 +0000 (13:26 -0800)]
MIPS: jump label: Add MIPS support.

In order not to be left behind, we add jump label support for MIPS.

Tested on 64-bit big endian (Octeon), and 32-bit little endian
(malta/qemu).

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/1923/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Use WARN() in uasm for better diagnostics.
David Daney [Tue, 28 Dec 2010 02:18:29 +0000 (18:18 -0800)]
MIPS: Use WARN() in uasm for better diagnostics.

On the off chance that uasm ever warns about overflow, there is no way
to know what the offending instruction is.

Change the printks to WARNs, so we can get a nice stack trace.  It has
the added benefit of being much more noticeable than the short single
line warning message, so is less likely to be ignored.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1905/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Optimize TLB handlers for Octeon CPUs
David Daney [Tue, 28 Dec 2010 02:07:57 +0000 (18:07 -0800)]
MIPS: Optimize TLB handlers for Octeon CPUs

Octeon can use scratch registers in the TLB handlers.  Octeon II can
use LDX instructions.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1904/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Add LDX and LWX instructions to uasm.
David Daney [Tue, 28 Dec 2010 02:07:56 +0000 (18:07 -0800)]
MIPS: Add LDX and LWX instructions to uasm.

Needed by Octeon II optimized TLB handlers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Pachwork: https://patchwork.linux-mips.org/patch/1903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Use BBIT instructions in TLB handlers
David Daney [Mon, 20 Dec 2010 23:54:50 +0000 (15:54 -0800)]
MIPS: Use BBIT instructions in TLB handlers

If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they
are more efficient than an AND followed by an branch and then
restoring the clobbered register.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1873/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Declare uasm bbit0 and bbit1 functions.
David Daney [Mon, 20 Dec 2010 23:54:49 +0000 (15:54 -0800)]
MIPS: Declare uasm bbit0 and bbit1 functions.

these are already defined, but declaring them allow them to be used
outside of uasm.c.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Use C0_KScratch (if present) to hold PGD pointer.
David Daney [Tue, 21 Dec 2010 22:19:11 +0000 (14:19 -0800)]
MIPS: Use C0_KScratch (if present) to hold PGD pointer.

Decide at runtime to use either Context or KScratch to hold the PGD
pointer.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1876/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Add DINSM to uasm.
David Daney [Tue, 21 Dec 2010 22:19:10 +0000 (14:19 -0800)]
MIPS: Add DINSM to uasm.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1875/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Probe for presence of KScratch registers.
David Daney [Tue, 21 Dec 2010 22:19:09 +0000 (14:19 -0800)]
MIPS: Probe for presence of KScratch registers.

Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1877/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Add generic support for multiple machines within a single kernel
Gabor Juhos [Tue, 23 Nov 2010 15:06:25 +0000 (16:06 +0100)]
MIPS: Add generic support for multiple machines within a single kernel

This patch adds a generic solution to support multiple machines based on
a given SoC within a single kernel image. It is implemented already for
several other architectures but MIPS has no generic support for that yet.

[Ralf: This competes with DT but DT is a much more complex solution and this
code has been used by OpenWRT for a long time so for now DT is a bad reason
to stop the merge but longer term this should be migrated to DT.]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: kaloz@openwrt.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1814/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Use printf extension %pR for struct resource
Joe Perches [Fri, 12 Nov 2010 21:37:52 +0000 (13:37 -0800)]
MIPS: Use printf extension %pR for struct resource

Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1772/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMIPS: Sibyte: Use vzalloc in sbbus profiler
Joe Perches [Fri, 5 Nov 2010 03:07:26 +0000 (20:07 -0700)]
MIPS: Sibyte: Use vzalloc in sbbus profiler

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1756/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
13 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
Linus Torvalds [Tue, 18 Jan 2011 18:00:50 +0000 (10:00 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/jejb/parisc-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  parisc: fix compile breakage caused by inlining maybe_mkwrite
  parisc : Remove broken line wrapping handling pdc_iodc_print()

13 years agoMerge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Tue, 18 Jan 2011 16:06:22 +0000 (08:06 -0800)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix asm/pgtable.h
  microblaze: Fix missing pagemap.h

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 18 Jan 2011 16:05:50 +0000 (08:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix initialization for HP 2011 notebooks
  ALSA: hda - Add support for VMware controller
  ALSA: hda - consitify string arrays
  ALSA: hda - Add add multi-streaming playback for AD1988
  ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code
  ASoC: WM8990: msleep() takes milliseconds not jiffies
  ALSA : au88x0 - Limit number of channels to fix Oops via OSS emu
  ALSA: constify functions in ac97
  ASoC: WL1273 FM radio: Fix breakage with MFD API changes
  ALSA: hda - More coverage for odd-number channels elimination for HDMI
  ALSA: hda - Store PCM parameters properly in HDMI open callback
  ALSA: hda - Rearrange fixup struct in patch_realtek.c
  ALSA: oxygen: Xonar DG: fix CS4245 register writes
  ALSA: hda - Suppress the odd number of channels for HDMI
  ALSA: hda - Add fixup-call in init callback
  ALSA: hda - Reorganize fixup structure for Realtek
  ALSA: hda - Apply Sony VAIO hweq fixup only once
  ALSA: hda - Apply mario fixup only once
  ALSA: hda - Remove unused fixup entry for ALC262

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Tue, 18 Jan 2011 16:05:20 +0000 (08:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits)
  m68knommu: fix broken setting of irq_chip and handler
  m68knommu: switch to using -mcpu= flags for ColdFire targets
  m68knommu: arch/m68knommu/Kconfig whitespace cleanup
  m68knommu: create optimal separate instruction and data cache for ColdFire
  m68knommu: support ColdFire caches that do copyback and write-through
  m68knommu: support version 2 ColdFire split cache
  m68knommu: make cache push code ColdFire generic
  m68knommu: clean up ColdFire cache control code
  m68knommu: move inclusion of ColdFire v4 cache registers
  m68knommu: merge bit definitions for version 3 ColdFire cache controller
  m68knommu: create bit definitions for the version 2 ColdFire cache controller
  m68knommu: remove empty __iounmap() it is no used
  m68knommu: remove kernel_map() code, it is not used
  m68knommu: remove do_page_fault(), it is not used
  m68knommu: use user stack pointer hardware on some ColdFire cores
  m68knommu: remove command line printing DEBUG
  m68knommu: remove fasthandler interrupt code
  m68knommu: move UART addressing to part specific includes
  m68knommu: fix clock rate value reported for ColdFire 54xx parts
  m68knommu: move ColdFire CPU names into their headers
  ...

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 18 Jan 2011 16:04:30 +0000 (08:04 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix tracepoint id to string perf.data header table
  perf tools: Fix handling of wildcards in tracepoint event selectors
  powerpc: perf: Fix frequency calculation for overflowing counters

13 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 18 Jan 2011 16:03:55 +0000 (08:03 -0800)]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV310: Add missing virtual ASoC DMA device
  ARM: S5PV210: Add missing virtual ASoC DMA device
  ARM: S5P6450: Add missing virtual ASoC DMA device
  ARM: S5P6440: Add missing virtual ASoC DMA device
  ARM: S5P6442: Enable I2S device to work on SMDK6442

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Tue, 18 Jan 2011 15:58:36 +0000 (07:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  autofs4: clean ->d_release() and autofs4_free_ino() up
  autofs4: split autofs4_init_ino()
  autofs4: mkdir and symlink always get a dentry that had passed lookup
  autofs4: autofs4_get_inode() doesn't need autofs_info * argument anymore
  autofs4: kill ->size in autofs_info
  autofs4: pass mode to autofs4_get_inode() explicitly
  autofs4: autofs4_mkroot() is not different from autofs4_init_ino()
  autofs4: keep symlink body in inode->i_private
  autofs4 - fix debug print in autofs4_lookup()
  vfs - fix dentry ref count in do_lookup()
  autofs4 - fix get_next_positive_dentry()

13 years agoperf: Fix contexted inheritance
Peter Zijlstra [Mon, 17 Jan 2011 12:45:37 +0000 (13:45 +0100)]
perf: Fix contexted inheritance

Linus reported that the RCU lockdep annotation bits triggered for this
rcu_dereference() because we're not holding rcu_read_lock().

Going over the code I cannot convince myself its correct:

 - holding a ref on the parent_ctx, doesn't avoid it being uncloned
   concurrently (as the comment says), so we can race with a free.

 - holding parent_ctx->mutex doesn't avoid the above free from taking
   place either, it would at best avoid parent_ctx from being freed.

I.e. the warning is correct. To fix the bug, serialize against the
unclone_ctx() call by extending the reach of the parent_ctx->lock.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: Clear irqstack thread_info
Brian Gerst [Mon, 17 Jan 2011 12:32:10 +0000 (07:32 -0500)]
x86: Clear irqstack thread_info

Mathias Merz reported that v2.6.37 failed to boot on his
system.

Make sure that the thread_info part of the irqstack is
initialized to zeroes.

Reported-and-Tested-by: Matthias Merz <linux@merz-ka.de>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <AANLkTimyKXfJ1x8tgwrr1hYnNLrPfgE1NTe4z7L6tUDm@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Tue, 18 Jan 2011 13:05:44 +0000 (14:05 +0100)]
Merge branch 'fix/asoc' into for-linus

13 years agox86: Make relocatable kernel work with new binutils
Shaohua Li [Tue, 18 Jan 2011 00:57:49 +0000 (08:57 +0800)]
x86: Make relocatable kernel work with new binutils

The CONFIG_RELOCATABLE=y option is broken with new binutils, which will make
boot panic.

According to Lu Hongjiu, the affected binutils are from 2.20.51.0.12 to
2.21.51.0.3, which are release since Oct 22 this year. At least ubuntu 10.10 is
using such binutils. See:

    http://sourceware.org/bugzilla/show_bug.cgi?id=12327

The reason of the boot panic is that we have 'jiffies = jiffies_64;' in
vmlinux.lds.S. The jiffies isn't in any section. In kernel build, there is
warning saying jiffies is an absolute address and can't be relocatable. At
runtime, jiffies will have virtual address 0.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Lu Hongjiu<hongjiu.lu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1295312269.1949.725.camel@sli10-conroe>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Tue, 18 Jan 2011 06:44:55 +0000 (07:44 +0100)]
Merge branch 'fix/hda' into for-linus

13 years agoALSA: hda - Fix initialization for HP 2011 notebooks
Vitaliy Kulikov [Fri, 14 Jan 2011 23:21:13 +0000 (17:21 -0600)]
ALSA: hda - Fix initialization for HP 2011 notebooks

Fixes for HP 2011 notebooks: enable dock ports and disable BTL
initialization in the driver.

Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoALSA: hda - Add support for VMware controller
Bankim Bhavsar [Mon, 17 Jan 2011 14:23:21 +0000 (15:23 +0100)]
ALSA: hda - Add support for VMware controller

Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio
Controller.

[changed to use AZX_DRIVER_GENERIC by tiwai]

Signed-off-by: Bankim Bhavsar <bbhavsar@vmware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoALSA: hda - consitify string arrays
Takashi Iwai [Mon, 17 Jan 2011 10:29:34 +0000 (11:29 +0100)]
ALSA: hda - consitify string arrays

Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoALSA: hda - Add add multi-streaming playback for AD1988
Raymond Yau [Mon, 17 Jan 2011 10:19:03 +0000 (11:19 +0100)]
ALSA: hda - Add add multi-streaming playback for AD1988

Attached a patch which add a new model to support multi-streaming
playback for ad1988.

playback another stereo stream through the front panel headphone on
device 2 while playback through the speakers connected to rear panel
on device 0 at the same time.

Tested with ad1988a rev2 codec on asus P5B-V motherboard.

Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoautofs4: clean ->d_release() and autofs4_free_ino() up
Al Viro [Mon, 17 Jan 2011 02:42:32 +0000 (21:42 -0500)]
autofs4: clean ->d_release() and autofs4_free_ino() up

The latter is called only when both ino and dentry are about to
be freed, so cleaning ->d_fsdata and ->dentry is pointless.

Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agoautofs4: split autofs4_init_ino()
Al Viro [Sun, 16 Jan 2011 23:43:40 +0000 (18:43 -0500)]
autofs4: split autofs4_init_ino()

split init_ino into new_ino and clean_ino; the former is
what used to be init_ino(NULL, sbi), the latter is for cases
where we passed non-NULL ino.  Lose unused arguments.

Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agoautofs4: mkdir and symlink always get a dentry that had passed lookup
Al Viro [Sun, 16 Jan 2011 23:29:35 +0000 (18:29 -0500)]
autofs4: mkdir and symlink always get a dentry that had passed lookup

... so ->d_fsdata will have been set up before we get there

Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>