net/hyperv: Add support for promiscuous mode setting

Add code to accept promiscuous mode setting, and pass it to
RNDIS filter.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

net/hyperv: Fix long lines in netvsc.c

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: line6: NULL dereference in dev_err()

"line6" hasn't been set at this point and we should be using
&interface->dev instead.

Gcc would have complained about this if it weren't for the fact that we
initialized line6 to NULL.  I removed the initialization.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: mousevsc: Properly add the hid device

We need to properly add the hid device to correctly initialize the
sysfs state. While this patch is against the staging tree; Jiri,
please pick up this patch as you merge the Hyper-V mouse driver.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: lttng: cleanup one-bit signed bitfields

* Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Sparse complains that these signed bitfields look "dubious".  The
> problem is that instead of being either 0 or 1 like people would expect,
> signed one bit variables like this are either 0 or -1.  It doesn't cause
> a problem in this case but it's ugly so lets fix them.

* walter harms (wharms@bfs.de) wrote:
> hi,
> This patch looks ok to me but this design is ugly by itself.
> It should be replaced by an uchar uint whatever or use a
> real bool (obviously not preferred by this programmes).

bool :1, uchar :1 or uint :1 could make sense. uchar:1/bool:1 won't save
any space here, because the surrounding fields are either uint or
pointers, so alignment will just add padding.

I try to use int/uint whenever possible because x86 CPUs tend to get
less register false-dependencies when using instructions modifying the
whole register (generated by using int/uint types) rather than only part
of it (uchar/char/bool). I only use char/uchar/bool when there is a
clear wanted space gain.

The reason why I never use the bool type within a structure when I want
a compact representation is that bool takes a whole byte just to
represent one bit:

struct usebitfield {
    int a;
    unsigned int f:1, g:1, h:1, i:1, j:1;
    int b;
};

struct usebool {
    int a;
    bool f, g, h, i, j;
    int b;
};

struct useboolbf {
    int a;
    bool f:1, g:1, h:1, i:1, j:1;
    int b;
};

int main()
{
    printf("bitfield %d bytes, bool %d bytes, boolbitfield %d bytes\n",
            sizeof(struct usebitfield), sizeof(struct usebool),
            sizeof(struct useboolbf));
}

result:

bitfield 12 bytes, bool 16 bytes, boolbitfield 12 bytes

This is because each bool takes one byte, while the bitfields are put in
units of "unsigned int" (or bool for the 3rd struct). So in this
example, we need 5 bytes + 3 bytes alignment for the bool, but only 4
bytes to hold the "unsigned int" unit for the bitfields.

The choice between bool and bitfields must also take into account the
frequency of access to the variable, because bitfields require mask
operations to access the selected bit(s). You will notice that none of
these bitfields are accessed on the tracing fast-path: only in
slow-paths. Therefore, space gain is more important than speed here.

One might argue that I have so few of these fields here that it does not
make an actual difference to go for bitfield or bool. I am just trying
to choose types best suited for their intended purpose, ensuring they
are future-proof and will allow simply adding more fields using the same
type, as needed.

So I guess I'll go for uint :1.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng wrapper: add missing include to kallsyms wrapper

Needed to keep bissectability.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: ring buffer move null pointer check to open

* Dan Carpenter <dan.carpenter@oracle.com> wrote:
> The patch c844b2f5cfea: "lttng lib: ring buffer" from Nov 28, 2011,
> leads to the following Smatch complaint:
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c +86
> +lib_ring_buffer_mmap_buf()
>          warn: variable dereferenced before check 'buf' (see line 79)
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c
>     78          unsigned long length = vma->vm_end - vma->vm_start;
>     79          struct channel *chan = buf->backend.chan;
>                                        ^^^^^^^^^^^^^^^^^
> Dereference.
>
>     80          const struct lib_ring_buffer_config *config = chan->backend.config;
>     81          unsigned long mmap_buf_len;
>     82
>     83          if (config->output != RING_BUFFER_MMAP)
>     84                  return -EINVAL;
>     85
>     86          if (!buf)
>                     ^^^^
> Check.
>
>     87                  return -EBADF;
>     88

Let's move the NULL buf check to the file "open", where it belongs. The
"open" file operation is the actual interface between lib ring buffer
and the modules using it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: ring buffer remove duplicate null pointer

* Dan Carpenter <dan.carpenter@oracle.com> wrote:
> The patch c844b2f5cfea: "lttng lib: ring buffer" from Nov 28, 2011,
> leads to the following Smatch complaint:
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c +33
> +lib_ring_buffer_fault()
>          warn: variable dereferenced before check 'buf' (see line 26)
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_mmap.c
>     25          struct lib_ring_buffer *buf = vma->vm_private_data;
>     26          struct channel *chan = buf->backend.chan;
>                                        ^^^^^^^^^^^^^^^^^
> Dereference.
>
>     27          const struct lib_ring_buffer_config *config = chan->backend.config;
>     28          pgoff_t pgoff = vmf->pgoff;
>     29          struct page **page;
>     30          void **virt;
>     31          unsigned long offset, sb_bindex;
>     32
>     33          if (!buf)
>                     ^^^^
> Check.
>
>     34                  return VM_FAULT_OOM;
>     35

This check is performed at mapping setup time in
lib_ring_buffer_mmap_buf() already, so we can safely remove this
duplicata.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: ring buffer: remove stale null-pointer

* Dan Carpenter <dan.carpenter@oracle.com> wrote:
[...]
> The patch c844b2f5cfea: "lttng lib: ring buffer" from Nov 28, 2011,
> leads to the following Smatch complaint:
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_frontend.c +1150
> +lib_ring_buffer_print_buffer_errors()
>          warn: variable dereferenced before check 'chan' (see line 1143)
>
> drivers/staging/lttng/lib/ringbuffer/ring_buffer_frontend.c
>   1142  {
>   1143          const struct lib_ring_buffer_config *config =
> +chan->backend.config;
>
> +^^^^^^^^^^^^^^^^^^^^
> Dereference.
>
>   1144          unsigned long write_offset, cons_offset;
>   1145
>   1146          /*
>   1147           * Can be called in the error path of allocation when
>   1148           * trans_channel_data is not yet set.
>   1149           */
>   1150          if (!chan)
>                 ^^^^^^^^^
> Check.  At first glance the comment seems out of date, I think check can
> be removed safely.
>
>   1151                  return;
>   1152          /*

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: Rename clashing symbols

The "rtl8192e: Export symbols" patch exported three functions already
exported by the rtl8192u driver. This patch renames the three functions:
  Dot11d_Init => dot11d_init
  HTUpdateSelfAndPeerSetting => HT_update_self_and_peer_setting
  IsLegalChannel => rtllib_legal_channel

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: ram_console: pass in a boot info string

Allow the board file to pass a boot info string through the
platform data that is appended to the /proc/last_kmsg file.

[moved the .h file to drivers/staging/android/ to be self-contained - gregkh]

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

android: logger: bump up the logger buffer sizes

(port from common android-2.6.39
  commit: 11430f16545205c614dd5bd58e4a7ee630fc0f9f)

events: (no change, 256)
main: 64 -> 256
radio: 64 -> 256
system: 64 -> 256

Signed-off-by: JP Abgrall <jpa@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

android: lowmemorykiller: Fix arguments to lowmem_shrink

The arguments to shrink functions have changed, update
lowmem_shrink to match.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: lowmemorykiller: Ignore shmem pages in page-cache

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: lowmemorykiller: Update arguments of shrinker for 2.6.35

Signed-off-by: Colin Cross <ccross@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: lowmemorykiller: Remove bitrotted codepath

Now that we're murder-synchronous, this code path will never be
called (and if it does, it doesn't tell us anything useful other
than we killed a task that was already being killed by somebody
else but hadn't gotten its' signal yet)

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: binder: Fix memory corruption via page aliasing

binder_deferred_release was not unmapping the page from the buffer
before freeing it, causing memory corruption.  This only happened
when page(s) had not been freed by binder_update_page_range, which
properly unmaps the pages.

This only happens on architectures with VIPT aliasing.

To reproduce, create a program which opens, mmaps, munmaps, then closes
the binder very quickly.  This should leave a page allocated when the
binder is released.  When binder_deferrred_release is called on the
close, the page will remain mapped to the address in the linear
proc->buffer.  Later, we may map the same physical page to a different
virtual address that has different coloring, and this may cause
aliasing to occur.

PAGE_POISONING will greatly increase your chances of noticing any
problems.

Signed-off-by: Christopher Lais <chris+android@zenthought.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: lowmemkiller: Substantially reduce overhead during reclaim

This patch optimizes lowmemkiller to not do any work when it has an outstanding
kill-request. This greatly reduces the pressure on the task_list lock
(improving interactivity), as well as improving the vmscan performance
when under heavy memory pressure (by up to 20x in tests).

Note: For this enhancement to work, you need CONFIG_PROFILING

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: lowmemorykiller: Don't try to kill the same pid over and over

  Under certain circumstances, a process can take awhile to
handle a sig-kill (especially if it's in a scheduler group with
a very low share ratio). When this occurs, lowmemkiller returns
to vmscan indicating the process memory has been freed - even
though the process is still waiting to die. Since the memory
hasn't actually freed, lowmemkiller is called again shortly after,
and picks the same process to die; regardless of the fact that
it has already been 'scheduled' to die and the memory has already
been reported to vmscan as having been freed.

  Solution is to check fatal_signal_pending() on the selected
task, and if it's already pending destruction return; indicating
to vmscan that no resources were freed on this pass.

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: binder: Create dedicated workqueue for binder deferred work

Some drivers flush the global workqueue when closed. This would deadlock if
the last reference to the file was released from the binder.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: timed_gpio: Properly discard invalid timeout values.

The timed output device never previously checked the return value of sscanf,
resulting in an uninitialized int being passed to enable() if input value
was invalid.

Signed-off-by: Mike Lockwood <lockwood@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: binder: Move debugging information from procfs to debugfs

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

binder: Use seq_file for debug interface.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

android: logger: Add new system log for framework/system log messages

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: timed_gpio: Request gpios.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: ram_console: Start ram console earlier

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: android: ramconsole: Ensure ramconsole does not get cluttered by apanic threads

[Note, this is part of a patch from Sam, just the drivers/staging/
portion, that adds a function that the apanic code calls, but the apanic
code isn't here, so just include part of this to make merges and diffs
easier and this keeps things self-contained - gregkh]

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: android: add the code back to the build

It builds, so ship it!

Cc: Arve Hjønnevåg <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "Staging: android: mark subsystem as broken"

This reverts commit 2cdf99ce2b9418c9d7c5f907195cfac421375520.

It now builds, so this can be reverted.

Cc: Arve Hjønnevåg <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

android-common: Fix slab.h includes for 2.6.34-rc4

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

android-common: include linux/slab.h

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/android: fix build issues

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "Staging: android: delete android drivers"

This reverts commit b0a0ccfad85b3657fe999805df65f5cfe634ab8a.

Turns out I was wrong, we want these in the tree.

Note, I've disabled the drivers from the build at the moment, so other
patches can be applied to fix some build issues due to internal api
changes since the code was removed from the tree.

Cc: Arve Hjønnevåg <arve@android.com>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: Split into two directories

Now that the rtl8192e driver is split up, it makes sense to keep the
rtllib code in one directory and the rtl8192e specific code in
another. This patch contains the split and the fixup of includes.

Since rtl_core.h already included rtllib.h and dot11d.h, rtl_core.h
was updated to point to the parent directory. All other references to
rtllib.h and dot11d.h in the rtl8192e specific code where deleted
rather than fixed. This leaves just one file that needs to know the
real location of the rtllib includes.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: Split the driver up

This patch splits the current r8192e_pci driver up into six different
drivers: rtllib, rtllib_crypt, rtllib_crypt_ccmp, rtllib_crypt_tkip,
rtllib_crypt_wep, and r8192e_pci.

Now that they are proper modules, the init and exit functions do not
need to be called directly. Also, the rtllib_*_null functions are not
needed since they will be loaded on demand.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: Export symbols

The rtl8192e driver had a natural split between the more generic
rtllib code and the more specific rtl8192e code. This patch exports
all the symbols needed by the r8192 specific code from the rtllib
generic code.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: create generic rtllib_debug.h

Rename rtl_debug.h to rtllib_debug.h. Source files should include
rtllib.h if they are generic and rtl_core.h if they are r8192e
specific. Files should never include both.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: move RTL_DEBUG and proc prototypes

The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.

The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtl8192e: cleanup rtl_debug.h

This patch cleans up rtl_debug.h by removing all the unused defines and
stub functions.
The changes to rtl_core.c are just to remove the deleted stub function
calls.
The changes to rtl_debug.c are functions that are never called.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Changed return type of lis3l02dq_read_event_config() to int

The lis3l02dq_read_event_config() function returned an ssize_t up to
now, which lead to a compiler warning in line 660 (initialization from
incompatible pointer type). The iio_info struct is defined to accept an
int-returning function as the read_event_config parameter.

Also it seems odd to have the check for (ret < 0) and return ret in
this case, when the return type is signed.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: VME: PIO2: Correct irq reset

The loop used to reset the interrupt masks has faulty logic. There are 4
banks of 8 I/O, however each mask is comprised of 2 bits and thus there are
8 sets of registers to clear. Driver was wrongly equating this with 8 banks
leading to a us writing past the end of the "bank" array (used to store mask
configuration as these registers are write only) and thus causing memory
corruption. Clear both registers of masks for each bank and half iterations.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/adc: strict_strtoul was used with a long type variable

The function ad7280_store_balance_timer() parses data from a char*
buffer into a long variable, but uses the the function strict_strtoul
which expects a pointer to an unsigned long variable as its third
parameter.

As Dan Carpenter mentioned, the values are capped a few lines later,
but a check if val is negative is missing.
Now this function will return -ERANGE if there is a representation of
a negative number in buf.

Additionally the checkpatch.pl considers strict_strtoul as obsolete.
I replaced its call with the suggested kstrtoul.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: Use kcalloc instead of kzalloc to allocate array

The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: integer overflows in private_ioctl()

There are two potential integer overflows in private_ioctl() if
userspace passes in a large sList.uItem / sNodeList.uItem.  The
subsequent call to kmalloc() would allocate a small buffer, leading
to a memory corruption.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6655: integer overflows in private_ioctl()

There are two potential integer overflows in private_ioctl() if
userspace passes in a large sList.uItem / sNodeList.uItem.  The
subsequent call to kmalloc() would allocate a small buffer, leading
to a memory corruption.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: card.c: Change return of CARDbAddBasicRate to void

In all locations that call this function ignore your returna, so remove
it.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: baseband.c: Remove commented code

This patch removes a lot of commented code, and some return calls of
void functions.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: baseband.c: Removed dead code, and fix coding standards

Remved some commented code, and fixed some style issues. was removed too
a redundant if statement.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: 80211mgr.c: Code cleanup, removed return of void funcs.

Removed return call of void functions. Removed some code style issues.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: main_usb.c: Use kzalloc instead kmalloc

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:vt6656: iwctl.c: Removed unneeded function

Removed the function iwctl_giwnwid, that just return a error code.

Changes v1 to v2:
Removed same functions of vt6655 and vt6656.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: move hv_netvsc out of staging area

hv_netvsc has been reviewed on netdev mailing list on 6/09/2011.
All recommended changes have been made. We are requesting to move
it out of staging area.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: KY Srinivasan <kys@microsoft.com>
Signed-off-by: Mike Sterling <Mike.Sterling@microsoft.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Changed data type of val in store_measurement_mode to u8

The code in sca3000_store_measurement_mode() uses the variable val to
do bitwise operations with an int mask and or-s it into st->rx[0] which
is an entry in a u8 array (see sca3000.h).

This means up to now values larger than a u8 were silently ignored and
just the lower 8 bits counted into the value that was written into
st->rx[0]. This code will return -ERANGE if the value in buf was too
large to fit into a u8.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Changed data type for val to unsigned long in write_frequency

In lis3102dq_write_frequency() we used a long variable to store the
value parsed from the char* buffer buf, as there only was a
strict_strtol() function to parse values.
Now we have got kstrto* which allows us to convert to the right data
type in most cases.

In this particular function we want to write a frequency value, and it
doesn't make sense to allow negative values here (as Dan Carpenter
pointed out in a previous email).
This means we can now parse the value into an unsigned long and get an
error for invalid (e.g. negative) values.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/accel: Changed data type in adis16220_write_16bit to u16

In the adis16220_write_16bit() function we used a long value to store
parsed data from the char* buffer buf.
The called function to actually write the data,
adis16220_spi_write_reg_16(), takes a u16 value as a parameter, so up
to now a value larger than u16 was silently ignored as it was only
truncated when passing the parameter.
Now this function will only accept values fitting into a u16.

Additionally the parsing function was changed to overcome the now
obsolete strict_strtol() function.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Reverse semaphore locking in IOCTL_BCM_BUFFER_DOWNLOAD_STOP.

This patch reorders the semaphore locking.
It makes better sense to first evaluate
fw_download_sema semaphore then
NVMRdmWrmLocl semaphore. The
fw_download_sema is suppose to be
acquired in the START ioctl.  If this is
not true, then it does not make sense
to continue.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Alter code to move error handling closer to the calls.

This is a cleanup patch. I've shuffled the code around to
move the error handling closer to the calls. I've removed
some indent levels. I've replaced break statements with
direct returns.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Clean up patch that calls semaphore down_trylock directly.

This patch evaluates/calls the down_trylock locking
function directly, instead of storing the results
in a variable and evaluating the variable. These
changes were made in:
IOCTL_BCM_BUFFER_DOWNLOAD_STOP and
IOCTL_BCM_BUFFER_DOWNLOAD_START.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Add LTTng entry to MAINTAINERS file

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: add LTTng to build

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: toplevel Makefile and Kconfig

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: probe callbacks

Implement the LTTng probe callbacks. One notable file here is
lttng-events.h, which is the core implementation of the LTTng
TRACE_EVENT macros for generation of probes and tracepoint decription
from the TRACE_EVENT declarations.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: add system call instrumentation probe

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: Add documentation and TODO files

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: debugfs and procfs ABI

Add the "lttng" virtual file to debugfs and procfs. All operations are
performed through ioctls (LTTng ioctl range is already reserved
upstream) on this virtual file and on anonymous file descriptors
returned by these ioctls. Each file descriptor is associated with a
tracer "object" (session, channel, stream, event, context).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: timing calibration feature

This calibration feature is fairly limited for now, but provides an
example of how this can be performed.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: dynamically selectable context information

Events can be augmented with context information. This is dynamically
configurable from the command line.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: tracer control and core structures

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: lib ring buffer clients

Each lttng buffer configuration (discard mode, overwrite mode, mmap
support, splice support, per-cpu buffers, global buffer for metadata) is
a lib ring buffer client.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: syscall instrumentation

x86-32 and x86-64 system call instrumentation, along with the
lttng-syscalls-generate-headers.sh script that generates the headers
from the system call list. See README for details.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng instrumentation: tracepoint events

Modifications to the in-kernel TRACE_EVENT are needed to generate the
compact event descriptions and the probe code LTTng generates. These
changes could apply to upstream TRACE_EVENT, but requires changing the
in-kernel API.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng wrappers

Implement wrappers for compatibility with older kernel versions and
kernels with had the libringbuffer (old) patchset applied.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng libs: add Makefile

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: offset alignment header

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng: BUILD_RUNTIME_BUG_ON

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: portable bitfield read/write header

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: ring buffer

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

lttng lib: lttng priority heap

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/mei: don't check if list is empty before looping

1. No need to check if a list is empty before list_for_each_ looping as
this is already checked by loop stopping conditional.

The side effect is reduced indentation depth
from:
if (!list_empty)
list_for_each()
to:
list_for_each()

2. drop cb_ prefix from cl_pos, cl_next variables used in list_for_each
loops. The code is more compact and readable

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/mei: remove status member of mei_io_list

status was never writen

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/mei: remove BUG_ON for testing of the response buffer size overflow

We can remove BUG_ON in mei_irq_thread_read_client_message()
as the testing for response buffer size overflow has already
graceful handling in place.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: clean up a single statement if

Eliminate the only remaining checkpatch.pl warning:

WARNING: braces {} are not necessary for single statement blocks
#7463: FILE: staging/xgifb/vb_setmode.c:7463:
+       if (ModeNo & 0x80) {
+               ModeNo = ModeNo & 0x7F;
+       }

total: 0 errors, 1 warnings, 0 checks, 7554 lines checked

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: reduce if nesting in XGI_GetVCLK2Ptr()

Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: reduce if nesting in XGI_SetLockRegs()

Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: delete empty if statement blocks

Delete empty if statement blocks. The patch eliminates following
checkpatch.pl warnings:

WARNING: suspect code indent for conditional statements (8, 8)

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: delete XGI_VBLongWait()

XGI_VBLongWait() is NOP, so just delete it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: delete commented-out code

Delete commented-out code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: inline XGI_SetMiscRegs()

Inline a trivial function.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: eliminate GetVGAType/Set_VGAType

Eliminate unneeded function and struct field. The same information is
available in HwDeviceExtension->jChipType.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make internal functions static

Make internal functions static.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_GetLVDSOEMTableIndex() static

XGI_GetLVDSOEMTableIndex() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_XG21SetPanelDelay() static

XGI_XG21SetPanelDelay() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_XG27BLSignalVDD() static

XGI_XG27BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_XG21BLSignalVDD() static

XGI_XG21BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_SetXG27FPBits() static

XGI_SetXG27FPBits() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_SetXG21FPBits() static

XGI_SetXG21FPBits() can be made static. Move the function, so that
forward declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_GetResInfo() static

XGI_GetResInfo() can be made static. Move the function, so that forward
declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: xgifb: vb_setmode: make XGI_LongWait() static

XGI_LongWait() can be made static. Move the function, so that forward
declaration is not needed.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/sm7xx: Convert pci_table entries to PCI_DEVICE (if PCI_ANY_ID is used)

This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/wlags49_h2: Convert pci_table entries to PCI_DEVICE (if PCI_ANY_ID is used)

This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.

Since CH_Agere_Systems_Mini_PCI_V1 is defined as 0 in hermes_pci_versions
and neither the enum nor the value is used anywhere else, we can drop
the assignment of .driver_data as it is initialized as 0 by default.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>