staging: iio: accel remove deprecated and misleading event macros.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: sca3000 event attribute name updates

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: lis3l02dq event attribute renames

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: events move buffer codes so they do not clash with new scheme

We could blugeon these more into the scheme I guess, but does it make sense
to do so?

Also remove all remain vestiges of old scheme.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: tsl2563 move to new event numbering scheme and remove old definitions

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: accel remove old event codes

Signed-off-by: Joanthan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: sca3000 move to new event code scheme and add combined orientations

The combined orientations allow handling of typical motion and free fall
detectors to be handled as threshold events just applied to a number of
axes via boolean operations.  So freefall is when x, y and z magnitudes
are all below a threshold for a particular period.  Motion detectors
are typically whether x or y or z are above a particular value.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: lis3l02dq move to new event code scheme

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc events update to new numbering system

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: events define macros for new event code system

These are step one of moving to a systematic numbering for event
codes.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Use proper BRCM_FULLMAC #ifdefs

Make it obvious that DHD_USE_STATIC_BUF is only used as part of FULLMAC build

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: light: Adding driver for ISL29018 ALS

adding support for the ISL 29018 ambient light and proximity sensor.

Addressed comments from reviews by Jonathan Cameron and Joe Perches
  * Removed some excess dbg prints that only printed function name
  * Renamed some properties to make them more descriptive
  * Added a property to list available adc resolutions
  * Defined arrays for resolutions/ranges as static const
  * Change loops initialization to memset for extensibility.
    * used sizeof() instead of ARRAY_SIZE() to be safer
  * Added a property to list available adc ranges
  * Fixed warnings and property names.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove dead code from siutils.c

Removed lots of unused functions from siutils.c

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove dead code from bcmwifi.c

Removed unused functions wf_chspec_ntoa() and wf_chspec_aton().

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove dead code from linux_osl.c.

Removed several completely unused functions:
osl_malloc_failed
osl_pcmcia_attr
osl_pcmcia_read_attr
osl_pcmcia_write_attr
osl_pktdup
and related macros

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unnecessary hndtcam.h

The header file is unnecessary.  Delete it and don't include it.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove unnecessary bitfuncs.h

This header file is no longer included anywhere.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Don't include bitfuncs.h

Remove include of bitfuncs.h, as it's completely uncessary for these files.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Use linux/bitops.h instead of bitfuncs.h

Use ffs() from linux/bitops.h, instead of the locally defined find_msbit().

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Remove dead code from aiutils.c

Removed unused function ai_view().

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: speakup: fix speakup core to build properly

The vc_data structure changed to move the tty structure off to the port,
so change the code to handle this.  Now the code will build properly,
and hopefully work as well.

Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add speakup to the staging directory

Speakup is a kernel based screen review package for the linux operating
system.  It allows blind users to interact with applications on the
linux console by means of synthetic speech.

The authors and maintainers of this code include the following:

Kirk Reiser, Andy Berdan, John Covici, Brian and
David Borowski, Christopher Brannon, Samuel Thibault and William Hubbs.

Signed-off-by: William Hubbs <w.d.hubbs@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/int16/s16/

Use the kernel types, don't invent your own.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: s/uint16/u16/

Use the kernel types, don't invent your own.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove forgotten undef

I forgot to remove the float undefs in typedef.h from previous patches,
this fixes this issue.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: wl_cfg80211.c: fix compiler warnings

size_t should be '%zd' in a printf, not '%d'

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove some more macros from linuxver.h

These aren't needed anymore, and now we are down to just one broken one,
and a whole bunch of #include files here.  This can be further factored
by moving the proper #includes into the different .c files, and not
leaving them in this one large one.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove unused irq typedef

If it's not needed, why define it?

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove unneeded pm macro

Use the real type, not a macro.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove some unused macros

These are all defined by the core kernel, use those versions
instead of just creating noops.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove unneeded pci macros

These wrapper macros aren't needed, remove them.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove free_netdev wrapper

It's incorrect, call the real function.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove old module macro wrappers

they weren't doing anything, so get rid of them.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: brcm80211: remove MY_INIT_WORK macro

Use the real macro instead.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Rename camel cased functions in channel.c to lowercase

Rename camel cased functions in channel.c to lowercase

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: file: Removed braces from some statement blocks

Unnecessary braces in some statement blocks

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove ';' after while() in macros.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: wl_cfg80211.c: fix 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000-usb: Add correct procedure for fw image downloading.

call request_firmware instead of trying to open the file directly from
the kernel driver.

Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: bind driver name to device name

Since the device name has changed use the new name to
bind the driver to it.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bug fix - connection status report

Added connection status report for the case connection fails.
Originally this logic was missing.

Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed duplicated file, linux_osl.c

Removed duplicated file, linux_osl.c from brcmfmac.
linux_osl.c under brcm80211/util/ will be shared
between softmac & fullmac drivers

Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: ring_generic: provide IIO_CONST_ATTR_SCAN_EL_TYPE_WITH_SHIFT

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: ad799x drop in_precision in favor of new in_type

-drop in_precision in favor of new in_type -
This also fixes the bug from the scan elements move (as a side effect)
-add sign and storagebits to struct ad799x_chip_info
-properly mask the results based on ad799x_chip_info:bits

staging: iio: adc: ad799x misc fixed per iio list review

remove new line
remove storagebits from struct ad799x_chip_info
use defined storagebits value for in_type

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: max1363 fix bug due to scan_element directory move.

    The device found passed to the attr functions is that of the ring
    buffer, not the the iio_dev so we need to bounce through one more
    hop to get the right address.

Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: sca3000 fix bug due to scan_element directory move.

The device found passed to the attr functions is that of the ring
buffer, not the the iio_dev so we need to bounce through one more
hop to get the right address.

Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: timestamp_en naming typo fix.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: max1363: remove unused variable

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: iio_ring_rip_outer return immediately if rip_lots returns <= 0

Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

misc: ti-st: Kconfig & Makefile for TI_ST

Add the Kconfig and the Makefile for the TI_ST driver.
TI_ST driver is the line discipline driver for the Texas Instrument's
WiLink chipsets.
Also add the ti-st folder to list of drivers under drivers/misc.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: move TI_ST from staging to misc/

move the 3 source files st_core.c, st_kim.c and st_ll.c
from staging to drivers/misc/.

Texas Instrument's WiLink 7 chipset packs wireless technologies like
Bluetooth, FM, GPS and WLAN into a single die.
Among these the Bluetooth, FM Rx/Tx and GPS are interfaced to a apps processor
over a single UART.

This line discipline driver allows various protocol drivers such as Bluetooth
BlueZ driver, FM V4L2 driver and GPS simple character device driver
to communicate with its relevant core in the chip.

Each protocol or technologies use a logical channel to communicate with chip.
Bluetooth uses the HCI-H4 [channels 1-4], FM uses a CH-8 and
GPS a CH-9 protocol. The driver also constitutes the TI HCI-LL Power
Management protocol which use channels 30-33.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: ad799x: Address iio list feedback

Address feedback from Shubhrajyoti Datta:
Cast return value
Michael Hennerich:
Use i2c_smbus_read_byte_data()
Fix return value check

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: max1363: prevent buffer overflow

ring->access.read_last() reads the entire datum from
the ring including padding and time stamp.

Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: adc: ad799x: prevent buffer overflow

ring->access.read_last() reads the entire datum from the ring including padding and time stamp.

Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch macro errors.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix various checkpatch spacing errors.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix 'do not init statics to 0 or NULL'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix 'do not init globals to 0 or NULL'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac/*: fix remaining 'assignment in if condition'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: the tree is now kept in git, not quilt

Update the MAINTAINERS file to show the new location of the staging
development tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: west bridge, block driver change for partition support

This patch fixes an error in the block driver wherein multiple
partitions in an mmc card were not detected correctly due to
incorrect alloc_disk arguments.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: west bridge, addition of common lock on cyasdevice

This patch adds and initializes a common lock to
cyasdevice module. This is meant to be used in order
to avoid error scenarios where the device module
could be called by both the block and gadget modules
at the same time.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove duplicated file, bcmwifi.c

Remove duplicated file, bcmwifi.c from brcmfmac.
bcmwifi.c under brcm80211/util/ will be shared
between softmac & fullmac drivers

Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: west bridge cyasgadget, removal of " " before ";"

This patch fixes removes all of the the " ;"'s in the west bridge
cyasgadget driver and instead replaces them with ";" only.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - update Kconfig to select IOMMU module

IOMMU module most be selected when using tidspbridge, because
now tidsbridge depends on iommu module.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bug fix for n_ssids usage and update drv_info

-update drv_info so it's visible in "ethtool -i" output
-remove n_ssids usage. Fixes nullptr deref bug seen before.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bcmutils.[ch]: purge unused funcs

Get rid of unused functions in bcmutils.[ch]. Note that bcmutils.h is shared between
fullmac and softmac

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: autofs3: get the TODO file right the third time

This is what Arnd wanted the file to say.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove dmm custom module

Dmm custom module is not needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - deprecate reserve/unreserve_memory funtions

Now what iommu memory usage is kept track by iommu module
the functions reserve/unreserve_memory are not needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove reserved memory clean up

Now iommv module keeps track of iommu memory used,
we do not need resource cleanup for reserved
memories anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct

We don't need to map iva2 iommu register base address
anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - move all iommu related code to a new file

Create dsp-mmu module and moves all the iommu code related to
this module.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove hw directory

hw directory was only being used for custom iommu implementation
APIs, so after the iommu module migration this directory is not
needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - fix mmufault support

With changes for iommu migration mmufault report and dsp track
dump is broken, this patch fixes that.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - remove custom mmu code from tiomap3430.c

This patch removes all the custom mmu code remaining in
tiomap3430.c which is not needed anymore.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name

Now these functions only map user space addresses to dsp virtual
addresses, so now the functions have a more meaningful name.
Also now user_to_dsp_map returns the mapped address.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge - move shared memory iommu maps to tiomap3430.c

Now iommu maps of shared memory segments are done in
bridge_brd_start and unmaped in bridge_brd_stop.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sst: Intel SST audio driver

This is the Intel SST audio driver.

As compared to the previous versions it has all the printks and other stuff
noted cleaned up and more hardware support. The Aava support is disabled in
this patch (is_aava resolves to 0) because the Aava board detection logic
is not yet upstream.

The driver itself is a combination of a traditional ALSA driver and a
hardware assisted offload driver which can play audio while the processor
is asleep but which can't do all the more interactive stuff.

In the general case most software would use the ALSA interface, but the
other interface is needed for certain classes of use such as music playback
on highly power consumption sensitive devices.

This is going to staging primarily because it depends upon the staging memrar
driver.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Harsha Priya <priya.harsha@intel.com>
[Merged together and tweaked for -next]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: olpc_dcon: mark the driver as CONFIG_BROKEN for now

It doesn't build yet, as it depends on some changes that are not yet
in the tree, so mark it as BROKEN for now until that gets resolved.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: tidspbridge: use omap_dsp_platform_data

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

omap: add dsp platform device

Otherwise tidspbridge cannot work.

It looks like this was dropped in the conversion to staging. I took the
liberty of doing some cleaning up.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: usbip: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: qdsp5: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: easycap: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: camera: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cxt1e1: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: tm6000: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192e: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192u: ieee80211: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlags49_h25: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlags49_h2: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cx25821: Makefile: cleaned up Makefile cflag lines

Changed to use the proper ccflags-y option

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>