powerpc/ps3: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the PS3 smp.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop'
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB

Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not
select PCI. This can lead to a config with the former and the latter
disabled, which does not build.

To fix this PPC_CELL_NATIVE should select PCI. However, that would
force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So
instead move the select of PPC_OF_PLATFORM_PCI and PCI under both
IBM_CELL_BLADE and CELLEB.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: ppc32 needs elf_read_implies_exec()

On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries
because old toolchains had bugs where they didn't mark program
segments executable that needed to be.  For some reason we didn't do
this on ppc32 builds.  This hadn't been an issue until commit 8d30c14c
("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side
effect that we are now enforcing execute permissions to some extent on
32-bit 4xx and Book E processors.

This fixes it by defining elf_read_implies_exec on 32-bit to turn on
the read-implies-exec behaviour on programs that are sufficiently old
that they don't have a PT_GNU_STACK program header.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'merge' of git://git./linux/kernel/git/jwboyer/powerpc-4xx into merge

powerpc/86xx: Add device_type entry to soc for ppc9a

The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase()
to return the correct address.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/44x: Correct memory size calculation for denali-based boards

Some U-Boot versions incorrectly set the number of chipselects to two
for Sequoia/Rainier boards while they only have one chipselect hardwired.
This patch adds a workaround for this, hardcoding the number of chipselects
to one for sequioa/rainer board models and reading the actual value from
the memory controller register DDR0_10 otherwise.

It also fixes another error in the way ibm4xx_denali_fixup_memsize
calculates memory size. When testing the DDR_REDUC bit, the polarity is
backwards.  A "1" implies 32-bit wide memory while a "0" implies 64-bit
wide memory.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

maintainers: Fix PowerPC 4xx git tree

Update the git tree URL for the PowerPC 4xx git tree.

Reported-by: Denis ChengRq <crquan@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

powerpc: fix for long standing bug noticed by gcc 4.4.0

Previous gcc versions didn't notice this because one of the preceding
#ifs always evaluated to true.

gcc 4.4.0 produced this error:

arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Revert "powerpc: Add support for early tlbilx opcode"

This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6.  Our HW
guys were able to fix this so it never sees the light of day.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: Fix modular build of ide-pmac when mediabay is built in

Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.

This fixes the following build error:

> CC [M]  drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/pasemi: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the pasemi setup.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: subrata@linux.vnet.ibm.com
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK

Fixes this build error:

In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

maintainers: Fix PS3 patterns

Correct the MAINTAINERS file patterns for PS3.  Removes some PS3
patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and
adds missing PS3 sound and RTC driver patterns.

CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning

Fix build warnings like these when CONFIG_PS3_FLASH=n:

  arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/32: Don't clobber personality flags on exec

Now that ppc32 implements address randomization it also wants to inherit
personality flags like ADDR_NO_RANDOMIZE across exec, for things like
`setarch ppc -R' to work.  But the ppc32 version of SET_PERSONALITY
forcefully sets PER_LINUX, clearing all personality flags.  So be
careful about preserving the flags.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fix crash on CPU hotplug

early_init_mmu_secondary() is called at CPU hotplug time, so it
must be marked as __cpuinit, not __init.

Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit").

Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge

powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/85xx: Added SMP defconfig

Since the vast majority of 85xx platforms are UP we introduce a new SMP
config for the few platforms that have more than one core.  Beyond
CONFIG_SMP=y and its dependencies this should be identical to
mpc85xx_defconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/85xx: Enabled a bunch of FSL specific drivers/options

* Add new 85xx boards
* Added QE/FSL gpio
* Enabled PHY drivers that exist on various boards
* Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE)
* FSL HW Crypto Engine
* CPM I2C
* QE Serial

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc/85xx: Updated generic mpc85xx_defconfig

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD

The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling
the SATA INTx interrupt, even when SATA support was enabled.  This was safe,
because the SATA driver re-enabled it.  But with commit a5bfc471 ("ahci: drop
intx manipulation on msi enable"), the driver no longer does this, and so SATA
support on the 8610 HPCD is broken.

The original quirk function disabled INTx because it caused some other
interrupt problem during early development on this board, but no one remembers
any more what that problem was, and it doesn't seem to occur any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

fsl_rio: Pass the proper device to dma mapping routines

The driver should pass a device that specifies internal DMA ops, but
currently NULL pointer is passed, therefore following bug appears
during boot up:

  ------------[ cut here ]------------
  Kernel BUG at c0018a7c [verbose debug info unavailable]
  Oops: Exception in kernel mode, sig: 5 [#1]
  [...]
  NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60
  LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60
  Call Trace:
  [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable)
  [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c
  [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50
  [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84
  [...]
  ---[ end trace 561bb236c800851f ]---

This patch fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

powerpc: Fix of_node_put() exit path in of_irq_map_one()

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: defconfig updates

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: Add FLASH nodes to lite5200 device tree

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/device-tree: Document MTD nodes with multiple "reg" tuples

Add binding for mtd nodes with multiple reg tuples.  Multiple reg tuples
are used when the flash region covers multiple devices of the same type,
but not necessarily the same size.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of

It's easier to find bindings descriptions in separate files.  So factor
out the MTD physmap bindings into a separate file to not clutter
booting-without-of.txt more.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx:
rework chip selects handling"), I merged activate_cs and deactivate_cs
hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver
is using these hooks too. And that resulted in the following build
failure:

CC      drivers/spi/mpc52xx_psc_spi.o
drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe':
drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data'
has no member named 'activate_cs'
drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data'
has no member named 'deactivate_cs'
make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1

This patch simply adds the legacy hooks back for 2.6.30, and for
2.6.31 we'll convert the driver to ->cs_control.

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

powerpc: pseries/dtl.c should include asm/firmware.h

A randconfig build on powerpc failed with:

dtl.c: In function 'dtl_init':
dtl.c:238: error: implicit declaration of function 'firmware_has_feature'
dtl.c:238: error: 'FW_FEATURE_SPLPAR' undeclared (first use in this function)

- We need firmware.h for these definitions.

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Fix data-corrupting bug in __futex_atomic_op

Richard Henderson pointed out that the powerpc __futex_atomic_op has a
bug: it will write the wrong value if the stwcx. fails and it has to
retry the lwarx/stwcx. loop, since 'oparg' will have been overwritten
by the result from the first time around the loop.  This happens
because it uses the same register for 'oparg' (an input) as it uses
for the result.

This fixes it by using separate registers for 'oparg' and 'ret'.

Cc: stable@kernel.org
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()

While adding native EEH support to Emulex and Qlogic drivers, it was
discovered that dev->error_state was set to pci_io_channel_normal too
late in the recovery process. These drivers rely on error_state to
determine if they can access the device in their slot_reset callback,
thus error_state needs to be set to pci_io_channel_normal in
eeh_report_reset(). Below is a detailed explanation (courtesy of Richard
Lary) as to why this is necessary.

Background:
PCI MMIO or DMA accesses to a frozen slot generate additional EEH
errors. If the number of additional EEH errors exceeds EEH_MAX_FAILS the
adapter will be shutdown. To avoid triggering excessive EEH errors and
an undesirable adapter shutdown, some drivers use the
pci_channel_offline(dev) wrapper function to return a Boolean value
based on the value of pci_dev->error_state to determine if PCI MMIO or
DMA accesses are safe. If the wrapper returns TRUE, drivers must not
make PCI MMIO or DMA access to their hardware.

The pci_dev structure member error_state reflects one of three values,
1) pci_channel_io_normal, 2) pci_channel_io_frozen, 3)
pci_channel_io_perm_failure.  Function pci_channel_offline(dev) returns
TRUE if error_state is pci_channel_io_frozen or pci_channel_io_perm_failure.

The EEH driver sets pci_dev->error_state to pci_channel_io_frozen at the
point where the PCI slot is frozen. Currently, the EEH driver restores
dev->error_state to pci_channel_io_normal in eeh_report_resume() before
calling the driver's resume callback. However, when the EEH driver calls
the driver's slot_reset callback() from eeh_report_reset(), it
incorrectly indicates the error state is still pci_channel_io_frozen.

Waiting until eeh_report_resume() to restore dev->error_state to
pci_channel_io_normal is too late for Emulex and QLogic FC drivers and
any other drivers which are designed to use common code paths in these
two cases: i) those called after the driver's slot_reset callback() and
ii) those called after the PCI slot is frozen but before the driver's
slot_reset callback is called. Case i) all driver paths executed to
reinitialize the hardware after a reset and case ii) all code paths
executed by driver kernel threads that run asynchronous to the main
driver thread, such as interrupt handlers and worker threads to process
driver work queues.

Emulex and QLogic FC drivers are designed with common code paths which
require that pci_channel_offline(dev) reflect the true state of the
hardware. The state transitions that the hardware takes from Normal
Operations to Slot Frozen to Reset to Normal Operations are documented
in the Power Architecture™ Platform Requirements+ (PAPR+) in Table 75.
PE State Control.

PAPR defines the following 3 states:

0 -- Not reset, Not EEH stopped, MMIO load/store allowed, DMA allowed
     (Normal Operations)
1 -- Reset, Not EEH stopped, MMIO load/store disabled, DMA disabled
2 -- Not reset, EEH stopped, MMIO load/store disabled, DMA disabled
     (Slot Frozen)

An EEH error places the slot in state 2 (Frozen) and the adapter driver
is notified that an EEH error was detected. If the adapter driver
returns PCI_ERS_RESULT_NEED_RESET, the EEH driver calls
eeh_reset_device() to place the slot into state 1 (Reset) and
eeh_reset_device completes by placing the slot into State 0 (Normal
Operations). Upon return from eeh_reset_device(), the EEH driver calls
eeh_report_reset, which then calls the adapter's slot_reset callback. At
the time the adapter's slot_reset callback is called, the true state of
the hardware is Normal Operations and should be accurately reflected by
setting dev->error_state to pci_channel_io_normal.

The current implementation of EEH driver does not do so and requires
this change to correct this deficiency.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

powerpc: Allow 256kB pages with SHMEM

Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed,
let powerpc 256kB pages coexist with CONFIG_SHMEM again.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Linux 2.6.30-rc2

Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix scheduling while holding the new active list spinlock
  drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU.
  drm/i915: Correctly set the write flag for get_user_pages in pread.
  drm/i915: Fix use of uninitialized var in 40a5f0de
  drm/i915: indicate framebuffer restore key in SysRq help message
  drm/i915: sync hdmi detection by hdmi identifier with 2D
  drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed)
  drm/i915: Implement batch and ring buffer dumping

x86 microcode: revert some work_on_cpu

Revert part of af5c820a3169e81af869c113e18ec7588836cd50 ("x86: cpumask:
use work_on_cpu in arch/x86/kernel/microcode_core.c")

That change is causing only one Intel CPU's microcode to be updated e.g.
microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22
where before it announced that also for CPU0 and CPU1 and CPU2.

We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code,
because Intel's request_microcode_user() involves a copy_from_user() from
/sbin/microcode_ctl, which therefore needs to be on that CPU at the time.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/i915: fix scheduling while holding the new active list spinlock

regression caused by commit 5e118f4139feafe97e913df67b1f7c1e5083e535:
i915_gem_object_move_to_inactive() should be called in task context,
as it calls fput();

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
[anholt: Add more detail to the comment about the lock break that's added]
Signed-off-by: Eric Anholt <eric@anholt.net>

Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: warn about lockdep disabling after kernel taint, fix

Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix "direct_io" private mmap
  fuse: fix argument type in fuse_get_user_pages()

Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix possible mismatch of sufile counters on recovery
  nilfs2: segment usage file cleanups
  nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error
  nilfs2: simplify handling of active state of segments fix
  nilfs2: remove module version
  nilfs2: fix lockdep recursive locking warning on meta data files
  nilfs2: fix lockdep recursive locking warning on bmap
  nilfs2: return f_fsid for statfs2

Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing FILE tag to MAINTAINERS
  microblaze: remove duplicated #include's
  microblaze: struct device - replace bus_id with dev_name()
  microblaze: Simplify copy_thread()
  microblaze: Add TIMESTAMPING constants to socket.h
  microblaze: Add missing empty ftrace.h file
  microblaze: Fix problem with removing zero length files

Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Add in PCI bus for DMA API debugging.
  sh: Pre-allocate a reasonable number of DMA debug entries.
  sh: sh7786: modify usb setup timeout judgment bug.
  MAINTAINERS: Update sh architecture file patterns.
  sh: ap325: use edge control for ov772x camera
  sh: Plug in support for ARCH=sh64 using sh SRCARCH.
  sh: urquell: Fix up address mapping in board comments.
  sh: Add support for DMA API debugging.
  sh: Provide cpumask_of_pcibus() to fix NUMA build.
  sh: urquell: Add board comment
  sh: wire up sys_preadv/sys_pwritev() syscalls.
  sh: sh7785lcr: fix PCI address map for 32-bit mode
  sh: intc: Added resume from hibernation support to the intc

Fix lpfc_parse_bg_err()'s use of do_div()

Fix lpfc_parse_bg_err()'s use of do_div().  It should be passing a 64-bit
variable as the first parameter.  However, since it's only using a 32-bit
variable, it doesn't need to use do_div() at all, but can instead use the
division operator.

This deals with the following warnings:

    CC      drivers/scsi/lpfc/lpfc_scsi.o
  drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err':
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type
  drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Update some of the USB kernel doc

Updates some usb_serial_port members documentation.

Signed-off-by: Leandro Dorileo <ldorileo@gmail.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parport_pc: Fix build failure drivers/parport/parport_pc.c for powerpc

In commit 51dcdfec6a274afc1c6fce180d582add9ff512c0 ("parport: Use the
PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg.
This isn't being supplied on powerpc.  This patch make powerpc fallback
to the old behaviour, that is using "0" for irqflags.

Fixes build failure:

  In file included from drivers/parport/parport_pc.c:68:
  arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports':
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port'
  make[3]: *** [drivers/parport/parport_pc.o] Error 1

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parport: Fix various uses of parport_pc

These got overlooked first time around.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tty: Fix leak in ti-usb

If the ti-usb adapter returns an zero data length frame (which happens)
then we leak a kref.  Found by Christoph Mair <christoph.mair@gmail.com>
who proposed a patch.  The patch here is different as Christoph's patch
didn't work for the case where tty = NULL and data arrived but Christoph
did all the hard work chasing it down.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cdc-acm: Fix long standing abuse of tty->low_latency

ACM sets the low latency flag but calls the flip buffer routines from
IRQ context which isn't permitted (and as of 2.6.29 causes a warning
hence this one was caught)

Fortunatelt ACM doesn't need to set this flag in the first place as it
only set it to work around problems in ancient (pre tty flip rewrite)
kernels.

Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

microblaze: Add missing FILE tag to MAINTAINERS

Signed-off-by: Michal Simek <monstr@monstr.eu>

lockdep: warn about lockdep disabling after kernel taint, fix

Impact: build fix for Sparc and s390

Stephen Rothwell reported that the Sparc build broke:

 In file included from kernel/panic.c:12:
 include/linux/debug_locks.h: In function '__debug_locks_off':
 include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg'

due to:

 9eeba61: lockdep: warn about lockdep disabling after kernel taint

There is some inconsistency between architectures about where exactly
xchg() is defined.

The traditional place is in system.h but the more logical point for it
is in atomic.h - where most architectures (especially new ones) have
it defined. These architecture also still offer it via system.h.

Some, such as Sparc or s390 only have it in asm/system.h and not available
via asm/atomic.h at all.

Use the widest set of headers in debug_locks.h and also include asm/system.h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

microblaze: remove duplicated #include's

Remove duplicated #include's in
  arch/microblaze/include/asm/io.h
  arch/microblaze/kernel/prom.c
  arch/microblaze/kernel/ptrace.c
  arch/microblaze/kernel/signal.c
  arch/microblaze/kernel/sys_microblaze.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: struct device - replace bus_id with dev_name()

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Simplify copy_thread()

Removing nr parameter from copy_tread function
commit 6f2c55b843836d26528c56a0968689accaedbc67

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add TIMESTAMPING constants to socket.h

This changes was introduce with
commit: cb9eff097831007afb30d64373f29d99825d0068

net: new user space API for time stamping of incoming and outgoing packets

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Add missing empty ftrace.h file

Signed-off-by: Michal Simek <monstr@monstr.eu>

microblaze: Fix problem with removing zero length files

Adding one new line was recommended solution.
Test with make distclean

Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

sh: Add in PCI bus for DMA API debugging.

This adds in the pci_bus_type for DMA API debug.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: Pre-allocate a reasonable number of DMA debug entries.

This prevents the DMA API debugging from running out of entries right
away on boot. Defines 4096 entries by default, which while a bit on the
heavy side, ought to leave enough breathing room for some time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  tomoyo: version bump to 2.2.0.
  tomoyo: add Documentation/tomoyo.txt

Fix quilt merge error in acpi-cpufreq.c

We ended up incorrectly using '&cur' instead of '&readin' in the
work_on_cpu() -> smp_call_function_single() transformation in commit
01599fca6758d2cd133e78f87426fc851c9ea725 ("cpufreq: use
smp_call_function_[single|many]() in acpi-cpufreq.c").

Andrew explains:
 "OK, the acpi tree went and had conflicting changes merged into it after
  I'd written the patch and it appears that I incorrectly reverted part
  of 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c while fixing the resulting
  rejects.

  Switching it to `readin' looks correct."

Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tomoyo: version bump to 2.2.0.

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>

tomoyo: add Documentation/tomoyo.txt

Signed-off-by: Kentaro Takeda <takedakn@nttdata.co.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Toshiharu Harada <haradats@nttdata.co.jp>
Signed-off-by: James Morris <jmorris@namei.org>

Merge branch 'for-rc1/xen/core' of git://git./linux/kernel/git/jeremy/xen

* 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: add FIX_TEXT_POKE to fixmap
  xen: honour VCPU availability on boot
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  xen: resume interrupts before system devices.
  xen/mmu: weaken flush_tlb_other test
  xen/mmu: some early pagetable cleanups
  Xen: Add virt_to_pfn helper function
  x86-64: remove PGE from must-have feature list
  xen: mask XSAVE from cpuid
  NULL noise: arch/x86/xen/smp.c
  xen: remove xen_load_gdt debug
  xen: make xen_load_gdt simpler
  xen: clean up xen_load_gdt
  xen: split construction of p2m mfn tables from registration
  xen: separate p2m allocation from setting
  xen: disable preempt for leave_lazy_mmu

sh: sh7786: modify usb setup timeout judgment bug.

This corrects a race with the PHY RST bit not being set properly if the
PLL status changes right before timeout. This resulted in it potentially
failing even if the device came up in time.

Special thanks to Mr. Juha Leppanen and Iwamatsu-san for reporting this
out and reviewing it.

Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

edac: use to_delayed_work()

The edac-core driver includes code which assumes that the work_struct
which is included in every delayed_work is the first member of that
structure.  This is currently the case but might change in the future, so
use to_delayed_work() instead, which doesn't make such an assumption.

linux-2.6.30-rc1 has the to_delayed_work() function that will allow this
patch to work

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: fix local pci_write_bits32

Fix the edac local pci_write_bits32 to properly note the 'escape' mask if
all ones in a 32-bit word.

Currently no consumer of this function uses that mask, so there is no
danger to existing code.

Signed-off-by: Jeff Haran <jharan@Brocade.COM>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xpc: clean up numerous globals

Introduce xpc_arch_ops and eliminate numerous individual global definitions.

Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xpc: implement opencomplete messaging

sgi-xpc has a window of failure where an open message can be sent and a
subsequent data message can get lost.  We have added a new message
(opencomplete) which closes that window.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xpc: prevent false heartbeat failures

The heartbeat timeout functionality in sgi-xpc is currently not trained to
the connection time.  If a connection is made and the code is in the last
polling window prior to doing a timeout, the next polling window will see
the heartbeat as unchanged and initiate a no-heartbeat disconnect.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-xpc: update SGI XP/XPC/XPNET maintainer

Dean has moved on to other work.  His responsibilities for XP/XPC/XPNET
have been handed to me.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc: use correct debugfs mountpoint

Use the default mountpoint of debugfs in the pktcdvd ABI.

Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: <balagi@justmail.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix documentation

The description about various statistics from memory.stat is not accurate
and confusing at times.

Correct this along with a few other minor cleanups.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)

This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: fix data corruption for racing writes

If two writers allocating blocks to file race with each other (e.g.
because writepages races with ordinary write or two writepages race with
each other), ext2_getblock() can be called on the same inode in parallel.
Before we are going to allocate new blocks, we have to recheck the block
chain we have obtained so far without holding truncate_mutex.  Otherwise
we could overwrite the indirect block pointer set by the other writer
leading to data loss.

The below test program by Ying is able to reproduce the data loss with ext2
on in BRD in a few minutes if the machine is under memory pressure:

long kMemSize  = 50 << 20;
int kPageSize = 4096;

int main(int argc, char **argv) {
int status;
int count = 0;
int i;
char *fname = "/mnt/test.mmap";
char *mem;
unlink(fname);
int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600);
status = ftruncate(fd, kMemSize);
mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
// Fill the memory with 1s.
memset(mem, 1, kMemSize);
sleep(2);
for (i = 0; i < kMemSize; i++) {
int byte_good = mem[i] != 0;
if (!byte_good && ((i % kPageSize) == 0)) {
//printf("%d ", i / kPageSize);
count++;
}
}
munmap(mem, kMemSize);
close(fd);
unlink(fname);

if (count > 0) {
printf("Running %d bad page\n", count);
return 1;
}
return 0;
}

Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shmem: respect MAX_LFS_FILESIZE

SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect
swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account.
Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to
grow slightly bigger than that supposed maximum.

Fix this by using the min of both (at build time not run time).  And it
happens that this calculation is good as far as 8MB pages on 32-bit or
16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that,
it's truncated to such large numbers that we don't need to care.

[akpm@linux-foundation.org: it needs pagemap.h]
[akpm@linux-foundation.org: fix sparc64 min() warnings]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Yuri Tikhonov <yur@emcraft.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shmem: fix division by zero

Fix a division by zero which we have in shmem_truncate_range() and
shmem_unuse_inode() when using big PAGE_SIZE values (e.g.  256kB on
ppc44x).

With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large
(0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type
from 'unsigned long' to 'unsigned long long'.

Hugh: reverted its unsigned long longs in shmem_truncate_range() and
shmem_getpage(): the pagecache index cannot be more than an unsigned long,
so the divisions by zero occurred in unreached code.  It's a pity we need
any ULL arithmetic here, but I found no pretty way to avoid it.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

intelfb: support i854

Support the Intel 854 Chipset in fbdev.

We test and use the patch on a Thomson IP1101 IPTV-Box.  On the VGA-Port
we get a normal signal.

Here is the link to the Mambux-Project: http://www.mambux.de

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Stefan Husemann <shusemann@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add documentation describing what tsk->active_mm means vs tsk->mm

I'm sure everyone knows this, but I didn't, so I googled it, and found a
nice explanation from Linus.  Might be worth sticking in Documentation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove warning when CONFIG_DEBUG_VM=n

mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used

[akpm@linux-foundation.org: simplify as suggested by Balbir]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys.c: clean up sys_shutdown exit path

Impact: cleanup, fix

Clean up sys_shutdown() exit path.  Factor out common code.  Return
correct error code instead of always 0 on failure.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

at25: make input buffers of at25_*write() const

| drivers/misc/eeprom/at25.c:358: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

at24: make input buffers of at24_*write() const

| drivers/misc/eeprom/at24.c:508: warning: assignment from incompatible pointer type

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jbd: update locking coments

Update information about locking in JBD revoke code.

Reported-by: Lin Tan <tammy000@gmail.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: document get_user_pages_fast()

While better than get_user_pages(), the usage of gupf(), especially the
return values and the fact that it can potentially only partially pin the
range, warranted some documentation.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

initramfs: fix initramfs to work with hardlinked init

Change cb6ff208076b5f434db1b8c983429269d719cef5 ("NOMMU: Support XIP on
initramfs") seems to have broken booting from initramfs with /sbin/init
being a hardlink.

It seems like the logic required for XIP on nommu, i.e.  ftruncate to
reported cpio header file size (body_len) is broken for hardlinks, which
have a reported size of 0, and the truncate thus nukes the contents of the
file (in my case busybox), making boot impossible and ending with runaway
loop modprobe binfmt-0000 - and of course 0000 is not a valid binary
format.

My fix is to only call ftruncate if size is non-zero which fixes things
for me, but I'm not certain whether this will break XIP for those files on
nommu systems, although I would guess not.

Signed-off-by: Randy Robertson <rmrobert@vmware.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: fix exit_ptrace() vs ptrace_traceme() race

Pointed out by Roland.  The bug was recently introduced by me in
"forget_original_parent: split out the un-ptrace part", commit
39c626ae47c469abdfd30c6e42eff884931380d6.

Since that patch we have a window after exit_ptrace() drops tasklist and
before forget_original_parent() takes it again.  In this window the child
can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after
that.

Change ptrace_traceme() to not attach to the exiting ->real_parent.  We
don't report the error in this case, we pretend we attach right before
->real_parent calls exit_ptrace() which should untrace us anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: bluesmoke-devel list is moderated for non-subscribers

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: reformat the Unevictable-LRU documentation

Do a bit of reformatting on the Unevictable-LRU documentation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: point the UNEVICTABLE_LRU config option at the documentation

Point the UNEVICTABLE_LRU config option at the documentation describing
the option.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysrq: remove duplicated #include

Remove duplicated #include in drivers/char/sysrq.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/video/cyblafb.h: remove it, it's unused

commit ddb53d48da5b0e691f35e703ac29118747f86c99 ("fbdev: remove cyblafb
driver") removed drivers/video/cyblafb.c, but not its .h file

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

res_counter: update documentation

After the introduction of resource counters hierarchies
(28dbc4b6a01fb579a9441c7b81e3d3413dc452df) the prototypes of
res_counter_init() and res_counter_charge() have been changed.

Keep the documentation consistent with the actual function prototypes.

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi: spi_write_then_read() bugfixes

The "simplify spi_write_then_read()" patch included two regressions from
the 2.6.27 behaviors:

 - The data it wrote out during the (full duplex) read side
   of the transfer was not zeroed.

 - It fails completely on half duplex hardware, such as
   Microwire and most "3-wire" SPI variants.

So, revert that patch.  A revised version should be submitted at some
point, which can get the speedup on standard hardware (full duplex)
without breaking on less-capable half-duplex stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

asm-generic/siginfo.h: update NSIGTRAP definition

Impact: (nearly) trivial

The patch

commit da654b74bda14c45a7d98c731bf3c1a43b6b74e2
Author: Srinivasa Ds <srinivasa@in.ibm.com>
Date:   Tue Sep 23 15:23:52 2008 +0530

    signals: demultiplexing SIGTRAP signal

forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new
number of sigtrap subcodes.  Nothing in the tree seems to use it, but
presumably something in user space might.  So update it.

Cc: Srinivasa Ds <srinivasa@in.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: do not allow unsupported pixel depth

Do not allow modes with unsupported pixel depth.  Otherwise, one can hang
a computer by setting incorrect value with fbset command.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

filemap: fix kernel-doc warnings

Fix filemap.c kernel-doc warnings:

Warning(mm/filemap.c:575): No description found for parameter 'page'
Warning(mm/filemap.c:575): No description found for parameter 'waiter'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/fiemap.h: include types.h now that it's exported

Include <linux/types.h> in fiemap.h.  Sam Ravnborg pointed out that this
was missing in this newly-exported header which uses the __u32 and __u64
types.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/aty/radeon_base.c: fix typo in comment

Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sisfb: fix color component length for pseudocolor modes

sisfb incorrectly sets the length of the color fields to 6 bits
for PSEUDOCOLOR modes, even though 8 bits are always used per pixel.
Fix this by setting the length to 8.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sa1100fb: fix color component length for pseudocolor modes

sa1100fb incorrectly sets the length of the color fields to 8 bits for
PSEUDOCOLOR modes for which only 4 bits are used per pixel.  Fix this by
setting the length to 4 bits for these modes.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>