staging/lustre/ptlrpc: Add schedule point to ptlrpc_check_set()

Most ptlrpc sets are believed to be small and bounded in length.  However
at the very least the ptlrpcd reuses the ptlrpc sets at its primary work
queue.  This work queue can easily have work added faster than the ptlrpcd
thread can process the work.  The unbounded work can lead to the ptlrpcd
monopolizing a CPU for hundreds of seconds.  Obviously a well-behaved
kernel function should obey the scheduler and share the processor.

We address that problem by inserting a cond_resched() at the top of the
main loop of ptlrpc_check_set().

Some have suggested putting the cond_resched() lower in the loop.  However,
the only current way to bound the number of loops that we exceed our
allocated run time is to put the call at the top of the loop.  Putting it
lower would allow an unknown number (and since it is unknown, it might be
excessively large at times) of cycles through the loop before a
resched is allowed.

Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/10358
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5053
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: replace hard-coded MGC_ENQUEUE_LIMIT value

During client mount, the client will send an LDLM_ENQUEUE request to
MGS with send delay set to MGC_ENQUEUE_LIMIT, which is hard coded to
50 seconds. On the other hand, the interval for pinger is deduced from
obd_timeout. When obd_timeout is configured for a longer period of
time, so does the pinger. We know that connecting to the secondary MGS
node is triggered by the pinger. Now that we have a longer interval,
the pinger will not be able to try the secondary before the
LDLM_ENQUEUE request fails the mount using the same delay limit.

This code change will replace the hard-coded send delay being
mentioned above with a value that is long enough to give the client a
chance to connect to the secondary MGS if exists.

Signed-off-by: Cheng Shao <cheng_shao@xyratex.com>
Reviewed-on: http://review.whamcloud.com/9217
Xyratex-bug-id: MRP-1516
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4582
Reviewed-by: Ryan Haasken <haasken@cray.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: race at req processing

Race between ptlrpc_resend_req() and ptlrpc_check_set().
1 thread do ptlrpc_check_set()->after_reply()
2 thread do ptlrpc_resend_req()
The result is request with rq_resend = 1 and MSG_REPLY flag.
When this request will came to server it will cause client eviction.
The patch skip ptlrpc_resend_req logic if rq_replied is set,
and clear rq_resend flag at reply_in_callback() when client got
reply.

Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Xyratex-bug-id: MRP-1888
Reviewed-on: http://review.whamcloud.com/10471
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5116
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Chris Horn <hornc@cray.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: get rid of old checksum initial value

Old code residue assumes initial checksum value as ~0, and relies on
that to check whether OST server has calculated bulk data checksum.
That is not the case anymore.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/10354
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4937
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mgc: mgc import reconnect race

mgc import can be reconnected by pinger or
ptlrpc_reconnect_import().
ptlrpc_invalidate_import() isn't protected against
alteration of imp_invalid state. Import can be
reconnected by pinger which makes imp_invalid
equal to false. Thus LASSERT(imp->imp_invalid) fails
in ptlrpc_invalidate_import().

It is safe to call ptlrpc_invalidate_import() when
import is deactivated, but ptlrpc_reconnect_import() doesn't
deactivate it.
Let's use only pinger when available to reconnect import

Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-on: http://review.whamcloud.com/9967
Xyratex-bug-id: MRP-1746
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4913
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: fix NULL pointer dereference of {exp, imp}_obd

Pointer 'obd' checked for NULL at line 694 may be dereferenced at
line 813.

Pointer 'req->rq_export->exp_obd' checked for NULL at line 1155
may be dereferenced at line 1164. Also there is one similar error
on line 1170.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/10062
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix frong ldlm flags type used

Fixed implicit conversion from 'unsigned long long' to 'int'.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/7799
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4023
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Only kill SGID/SUID bits

Check that attr mode is valid before using it when determining if to
clear SGID and SUID bits in ll_setattr.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/10153
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4924
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Protect request buffer changing

*_enlarge_reqbuf class of functions can change request body location
for a request that's already in replay list, as such a parallel
traverser of the list (after_reply -> ptlrpc_free_committed) might
access freed and scrambled memory causing assertion.

Since all such users only can get to this request under imp_lock, take
imp_lock to protect against them in *_enlarge_reqbuf

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/10074
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3333
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: revert changes to libcfs_sock_ioctl

Changes introduced by 80db2734acbc78db12798cfb611d6acc7fe389e6
unfortunately totally break lustre, we use this function
to access not only socket proto obs, but also device ioctl
like SIOCGIFCONF that now fail.
Reverting part of the previous patch to regain the needed
functionality.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Fredrick John Berchmans <fredrickprashanth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: remove blank lines after an open brace

This patch fixes the following checkpatch warning:

  CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: fix block comment style

This patch fixes the following checkpatch warnings, which are issued
when the gdm72xx driver is moved out of staging into drivers/net/wimax:

  WARNING: networking block comments don't use an empty /* line, use /* Comment...
  WARNING: networking block comments start with * on subsequent lines
  WARNING: networking block comments put the trailing */ on a separate line

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: check return value of sscanf

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: fix sbeCrc function declaration

This patch fixes the following sparse warning:

drivers/staging/cxt1e1/sbecrc.c:86:1: warning: symbol 'sbeCrc' was not declared. Should it be static?

Furthermore it fixes wring sbeCrc return type in function declaration.

Signed-off-by: Pawel Lebioda <pawel.lebioda89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ft1000_dnld.c:code indent should use tabs where possible

This patch fixes the following checkpatch.pl issue in
ft1000/ft1000-pcmcia/ft1000_dnld.c
ERROR: code indent should use tabs where possible

Signed-off-by: Quentin Lee <lee.rhapsody@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced1401: fix sparse warning for ced1401

This patch fixes below warning.

drivers/staging/ced1401/ced_ioc.c:703:30: warning: incorrect type in assignment (different address spaces)
drivers/staging/ced1401/ced_ioc.c:703:30:    expected void *[usertype] lpvBuff
drivers/staging/ced1401/ced_ioc.c:703:30:    got char [noderef] <asn:1>*puBuf

Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused rtw_pwr_wakeup_ex()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove no-op rtl8723a_sreset_linked_status_check()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: sreset_priv->dbg_trigger_point is never set

No point carrying a bunch of code around that is never going to get
called.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Wifi_Error_Status isn't used for anything

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused rtw_sreset_get_wifi_status()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_allow_stainfo23a(): Make hwaddr argument const

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_sta_mgt.c: One copy of the broadcast address should suffice

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_sta_mgt.c: Use ether_addr_{copy, equal}()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: usb_ops_linux.c: Add blank line between declaration and usage

This fixes a minor sparse warning.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix sparse warning

Found running sparse on the rtl8723au driver.

  CHECK   drivers/staging/rtl8723au/core/rtw_cmd.c
drivers/staging/rtl8723au/core/rtw_cmd.c:1479:54: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8723au/core/rtw_cmd.c:1479:54:    expected int [signed] gfp
drivers/staging/rtl8723au/core/rtw_cmd.c:1479:54:    got restricted gfp_t

Signed-off-by: Clement Calmels <clement.calmels@free.fr>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove inapplicable comment

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _queue_empty

_queue_empty is an inline wrapper around list_empty.  This patch removes this
wrapper function and instead calls list_empty directly.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove function get_list_head

get_list_head is an inline that returns &list->head.  This patch removes this
inline and directly applies &list->head where applicable.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function get_next

get_next is just an inline wrapper around return list->next.  This
patch removes the wrapper and directly uses list->next where
applicable.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function list_delete

list_delete is just an inline wrapper around list_del_init.  This patch
removes the wrapper and directly uses list_del_init.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function list_insert_tail

list_insert_tail is just an inline wrapper around list_add_tail.  This
patch removes the wrapper and directly uses list_add_tail.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function is_list_empty

is_list_empty is just an inline wrapper around list_empty.  This patch
removes the wrapper and directly uses list_empty instead.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove wrapper function _init_listhead

_init_listhead is just an inline wrapper around INIT_LIST_HEAD.  This
patch removes the wrapper and directly uses INIT_LIST_HEAD instead.

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8821ae: replace magic number by macro

For consistency with other drivers, replace a magic number by a macro.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove unused inline _RND512()

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove unused inline _RND256()

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove inline _RND128() and use round_up()

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove inline _RND8() and use round_up()

Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8821ae/rtl8821ae: Remove dead code

This is all #if 0'ed out, and it contains some rather weird stuff
(post-increment of a bool, for example). Nuke it.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace _cancel_timer() with del_timer_sync()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function flush_signals_thread()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function thread_enter()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use round_up() instead of RND4()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: osdep_service.h: Remove unused macros

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use round_up() instead of _RND4()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use round_up() instead of _RND8()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use round_up() instead of _RND128()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused inline function _RND256()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: osdep_service.h: Remove unused function definations

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use cpu_to_le16() insted of RTW_PUT_LE16()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use get_unaligned_le16() instead of RTW_GET_LE16()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused inline function bitshift()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use get_unaligned_be16() instead of RTW_GET_BE16()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use cpu_to_be16() instead of RTW_PUT_BE16()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use cpu_to_be32() instead of RTW_PUT_BE32()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace _cancel_timer_ex() with del_timer_sync()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused inline function _RND512()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace _cancel_workitem_sync() with cancel_work_sync()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace _rtw_queue_empty() with list_empty()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: osdep_service.c: Remove unused macro

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Replace rtw_list_delete() with list_del_init()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: osdep_service.h: Remove unused macro, enum and variables

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_get_time_interval_ms()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_division64()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use kstrtoul() for string to long conversion

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_sleep_schedulable()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove _rtw_init_listhead(), wrapper for INIT_LIST_HEAD()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_is_list_empty(), wrapper for list_emty()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_end_of_queue_search()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_list_insert_tail(), wrapper for list_add_tail()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_list_insert_head()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_mfree2d(), wrapper for kfree()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function _rtw_memset()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy rtl8188eu_free_xmit_priv() and its wrapper

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function Hal_InitChannelPlan()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy rtl8188e_stop_thread() and its wrapper

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy rtl8188e_start_thread() and its wrapper

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy rtl8188e_GetHalODMVar() and its wrapper

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function CheckFwRsvdPageContent()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove dummy function odm_DynamicTxPower()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Merge usb_ops.h into usb_ops_linux.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove continual_urb_error from struct dvobj_priv

rtw_inc_and_chk_continual_urb_error() was only user of continual_urb_error,
which has been removed.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove inline function rtw_inc_and_chk_continual_urb_error()

rtw_inc_and_chk_continual_urb_error() is used to check if device is
removed unexpectedly, to do that we can just check status of urb in
usb_read_port_complete() and usbctrl_vendorreq() doed that by checking
return value of usb_control_msg().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: usb_ops.h: Remove macro rtw_usb_control_msg()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu:usb_ops.h:Remove unused enum, macros and function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove macros specific to kernel version < 2.6.12

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Merge hal/usb_ops_linux.c into os_dep/usb_ops_linux.c

Consolidate all usb operation related functions in one file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove unneeded config and headers

Remove WIRELESS_EXT and WEXT_PRIV

remove net/iw_handler.h, linux/etherdevice.h and net/cfg80211.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device.h remove dead strutures and variables

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove variables device_set_options

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device_init_registers remove unused variables

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove 80211hdr.h

Remove all variables that are dead with this header

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove old channel tables

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove wmgr.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove old rx receive list

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove vnt_set_channel from device_init_registers

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dpc remove dead code RXvMngWorkItem

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead codead remove bssdb.h header

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>