firefly-linux-kernel-4.4.55.git
9 years agonet: dsa: Consolidate getting the statistics
Andrew Lunn [Thu, 2 Apr 2015 02:06:38 +0000 (04:06 +0200)]
net: dsa: Consolidate getting the statistics

Reading the statistics from the hardware is the same for all
chips. What differs is the number of available statistics. Have just
one copy of the code in the shared mv88e6xxx.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6xxx: Add missing mutex's in EEE operations.
Andrew Lunn [Thu, 2 Apr 2015 02:06:37 +0000 (04:06 +0200)]
net: dsa: mv88e6xxx: Add missing mutex's in EEE operations.

The phy_mutex should be held while reading and writing to the phy.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: Consolidate phy read and write functions
Andrew Lunn [Thu, 2 Apr 2015 02:06:36 +0000 (04:06 +0200)]
net: dsa: Consolidate phy read and write functions

Move the common code for reading and writing phy registers into the
shared mv88e6xxx.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: Move phy page access functions into shared code
Andrew Lunn [Thu, 2 Apr 2015 02:06:35 +0000 (04:06 +0200)]
net: dsa: Move phy page access functions into shared code

These functions could in future be used by other drivers. Move them
into the shared area.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: Centralize Marvell switch reset
Andrew Lunn [Thu, 2 Apr 2015 02:06:34 +0000 (04:06 +0200)]
net: dsa: Centralize Marvell switch reset

Marvell switches are all reset in nearly the same way. The only
difference is if the PPU should be enabled or not. Move this
code into the shared mv88x6xxx.c.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: Consistently set and use ps->num_ports
Andrew Lunn [Thu, 2 Apr 2015 02:06:33 +0000 (04:06 +0200)]
net: dsa: Consistently set and use ps->num_ports

As a step towards consolidating code, consistently set the
number of ports in the private state structure, and make use of it in
loops.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6123_61_65: Determine and use number of switch ports
Guenter Roeck [Thu, 2 Apr 2015 02:06:32 +0000 (04:06 +0200)]
net: dsa: mv88e6123_61_65: Determine and use number of switch ports

Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6131: Determine and use number of switch ports
Guenter Roeck [Thu, 2 Apr 2015 02:06:31 +0000 (04:06 +0200)]
net: dsa: mv88e6131: Determine and use number of switch ports

Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6xxx: Move switch product IDs into common include file
Guenter Roeck [Thu, 2 Apr 2015 02:06:30 +0000 (04:06 +0200)]
net: dsa: mv88e6xxx: Move switch product IDs into common include file

This will let us use the switch product IDs in the common source code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: dsa: mv88e6131: Use common initialization functions
Guenter Roeck [Thu, 2 Apr 2015 02:06:29 +0000 (04:06 +0200)]
net: dsa: mv88e6131: Use common initialization functions

Common initialization functions will be needed to enable
HW bridging support.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agopkt_sched: fq: correct spelling of locally
Simon Horman [Thu, 2 Apr 2015 02:20:23 +0000 (11:20 +0900)]
pkt_sched: fq: correct spelling of locally

Correct spelling of locally.

Also remove extra space before tab character in struct fq_flow.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovxlan: correct spelling in comments
Simon Horman [Thu, 2 Apr 2015 02:17:58 +0000 (11:17 +0900)]
vxlan: correct spelling in comments

Fix some spelling / typos:
* droppped -> dropped
* asddress -> address
* compatbility -> compatibility

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovmxnet3: spelling fixes
stephen hemminger [Wed, 1 Apr 2015 22:33:08 +0000 (15:33 -0700)]
vmxnet3: spelling fixes

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovxge: Add const to ethtool_driver_stats_keys
Joe Perches [Wed, 1 Apr 2015 19:29:13 +0000 (12:29 -0700)]
vxge: Add const to ethtool_driver_stats_keys

Move about half a KB of data to text.

Miscellanea:

o Move strings out of the .h file into the .c file
  in case the .h file is ever #included twice

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocrypto: algif - use kmalloc instead of kzalloc
Tadeusz Struk [Mon, 30 Mar 2015 21:25:44 +0000 (14:25 -0700)]
crypto: algif - use kmalloc instead of kzalloc

No need to use kzalloc to allocate sgls as the structure is initialized anyway.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocrypto: af_alg - make exports consistant
Tadeusz Struk [Mon, 30 Mar 2015 21:25:43 +0000 (14:25 -0700)]
crypto: af_alg - make exports consistant

Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agochelsio cxgb/cxgb3: Make stats_strings arrays const
Joe Perches [Wed, 1 Apr 2015 15:49:24 +0000 (08:49 -0700)]
chelsio cxgb/cxgb3: Make stats_strings arrays const

Move ~2KB of strings in each driver from data to text.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'wireless-drivers-next-for-davem-2015-04-01' of git://git.kernel.org/pub...
David S. Miller [Wed, 1 Apr 2015 18:27:28 +0000 (14:27 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2015-04-01' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath9k:

* add Active Interference Cancellation, a method implemented in the HW
  to counter WLAN RX > sensitivity degradation when BT is transmitting
  at the same time. This feature is supported by cards like WB222
  based on AR9462.

iwlwifi:

* Location Aware Regulatory was added by Arik
* 8000 device family work
* update to the BT Coex firmware API

brmcfmac:

* add new BCM43455 and BCM43457 SDIO device support
* add new BCM43430 SDIO device support

wil6210:

* take care of AP bridging
* fix NAPI behavior
* found approach to achieve 4*n+2 alignment of Rx frames

rt2x00:

* add new rt2800usb device DWA 130

rtlwifi:

* add USB ID for D-Link DWA-131
* add USB ID ASUS N10 WiFi dongle

mwifiex:

* throughput enhancements
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'linux-can-next-for-4.1-20150401' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Wed, 1 Apr 2015 17:58:06 +0000 (13:58 -0400)]
Merge tag 'linux-can-next-for-4.1-20150401' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-04-01

this is a pull request of 5 patches for net-next/master.

There are two patches for the ems_usb driver by Gerhard Uttenthaler and
me, which fix sparse endianess warnings. Oliver Hartkopp adds two
patches to improve and extend the CAN-ID filter handling on RAW CAN
sockets. The last patch is by me, it silences an uninitialized variable
warning in the peak_usb driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: enable MoCA link state change detection
Petri Gynther [Wed, 1 Apr 2015 07:40:00 +0000 (00:40 -0700)]
net: bcmgenet: enable MoCA link state change detection

Currently, MoCA fixed PHYs are always in link-up state, regardless of
whether the link is actually up or not.

Add code to properly detect MoCA link state changes and to reflect the
new state in MoCA fixed PHY. Only GENET V3 and V4 MACs are capable of
detecting MoCA link state changes.

The code works as follows:
1. GENET MAC detects MoCA link state change and issues UMAC_IRQ_LINK_UP
   or UMAC_IRQ_LINK_DOWN interrupt.
2. Link up/down interrupt is processed in bcmgenet_irq_task(), which
   calls phy_mac_interrupt().
3. phy_mac_interrupt() updates the fixed PHY phydev->link and kicks
   the PHY state machine.
4. PHY state machine proceeds to read the fixed PHY link status
   register.
5. When the fixed PHY link status register is being read, the new
   function bcmgenet_fixed_phy_link_update() gets called. It copies
   the fixed PHY phydev->link value to the fixed PHY status->link.
6. PHY state machine receives the new link state of the fixed PHY.
7. MoCA fixed PHY link state now correctly reflects the real MoCA
   hardware link state.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: phy: at803x: simplify using devm_gpiod_get_optional and its 4th argument
Uwe Kleine-König [Tue, 31 Mar 2015 20:08:45 +0000 (22:08 +0200)]
net: phy: at803x: simplify using devm_gpiod_get_optional and its 4th argument

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Moreover use devm_gpiod_get_optional instead of ignoring all errors
returned by devm_gpiod_get and simplify accordingly.

The result is more strict error handling which is good.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocaif: remove unused struct member
Rasmus Villemoes [Tue, 31 Mar 2015 14:05:23 +0000 (16:05 +0200)]
caif: remove unused struct member

The tty_name member of struct ser_device is never set or used, so it
can be removed. (The definition of struct ser_device is private to
this .c file, and the identifier tty_name only occurs in this one
place.)

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agocan: pcan_usb: pcan_usb_fd_send_cmd(): silence compiler warning about uninitialized var
Marc Kleine-Budde [Wed, 1 Apr 2015 09:49:59 +0000 (11:49 +0200)]
can: pcan_usb: pcan_usb_fd_send_cmd(): silence compiler warning about uninitialized var

This patch silences the compiler warning:

drivers/net/can/usb/peak_usb/pcan_usb_fd.c: In function 'pcan_usb_fd_send_cmd':
drivers/net/can/usb/peak_usb/pcan_usb_fd.c:185:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]

by initialising the variable as 0.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
9 years agocan: introduce new raw socket option to join the given CAN filters
Oliver Hartkopp [Wed, 1 Apr 2015 05:50:29 +0000 (07:50 +0200)]
can: introduce new raw socket option to join the given CAN filters

The CAN_RAW socket can set multiple CAN identifier specific filters that lead
to multiple filters in the af_can.c filter processing. These filters are
indenpendent from each other which leads to logical OR'ed filters when applied.

This socket option joines the given CAN filters in the way that only CAN frames
are passed to user space that matched *all* given CAN filters. The semantic for
the applied filters is therefore changed to a logical AND.

This is useful especially when the filterset is a combination of filters where
the CAN_INV_FILTER flag is set in order to notch single CAN IDs or CAN ID
ranges from the incoming traffic.

As the raw_rcv() function is executed from NET_RX softirq the introduced
variables are implemented as per-CPU variables to avoid extensive locking at
CAN frame reception time.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
9 years agocan: fix multiple delivery of a single CAN frame for overlapping CAN filters
Oliver Hartkopp [Wed, 1 Apr 2015 05:50:28 +0000 (07:50 +0200)]
can: fix multiple delivery of a single CAN frame for overlapping CAN filters

The CAN_RAW socket can set multiple CAN identifier specific filters that lead
to multiple filters in the af_can.c filter processing. These filters are
indenpendent from each other which leads to logical OR'ed filters when applied.

This patch makes sure that every CAN frame which is filtered for a specific
socket is only delivered once to the user space. This is independent from the
number of matching CAN filters of this socket.

As the raw_rcv() function is executed from NET_RX softirq the introduced
variables are implemented as per-CPU variables to avoid extensive locking at
CAN frame reception time.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
9 years agocan: ems_usb: mark timestamp as little endian
Marc Kleine-Budde [Wed, 25 Mar 2015 09:36:17 +0000 (10:36 +0100)]
can: ems_usb: mark timestamp as little endian

The struct ems_cpc_msg describes the a message received from the USB device,
which uses little endian byte order. This patch marks the timestamp in struct
ems_cpc_msg accordingly.

Acked-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
9 years agocan: ems_usb: fix endianess of CAN ID
Gerhard Uttenthaler [Tue, 24 Mar 2015 18:02:29 +0000 (19:02 +0100)]
can: ems_usb: fix endianess of CAN ID

The device expects the CAN ID in little endian format.

Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
9 years agoMerge branch 'ptp-ns_to_timespec64'
David S. Miller [Tue, 31 Mar 2015 21:19:19 +0000 (17:19 -0400)]
Merge branch 'ptp-ns_to_timespec64'

Richard Cochran says:

====================
ptp: remove open coded ns_to_timespec64 and reverse

This patch series is a follow up to the recent timespec64 work for the
PTP Hardware Clock drivers.  Arnd noticed that drivers are using open
coded implementations of ns_to_timespec64 and timespec64_to_ns.  This
series replaces the open coded logic with the helper functions.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: ixgbe: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:13 +0000 (23:08 +0200)]
ptp: ixgbe: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: fec: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:09 +0000 (23:08 +0200)]
ptp: fec: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: tg3: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:08 +0000 (23:08 +0200)]
ptp: tg3: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: blackfin: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:06 +0000 (23:08 +0200)]
ptp: blackfin: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: cpts: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:16 +0000 (23:08 +0200)]
ptp: cpts: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: stmmac: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:15 +0000 (23:08 +0200)]
ptp: stmmac: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: mlx4: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:14 +0000 (23:08 +0200)]
ptp: mlx4: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: igb: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:12 +0000 (23:08 +0200)]
ptp: igb: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: e1000e: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:11 +0000 (23:08 +0200)]
ptp: e1000e: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() instead of
open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: gianfar: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:10 +0000 (23:08 +0200)]
ptp: gianfar: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: bnx2x: use helpers for converting ns to timespec.
Richard Cochran [Tue, 31 Mar 2015 21:08:07 +0000 (23:08 +0200)]
ptp: bnx2x: use helpers for converting ns to timespec.

This patch changes the driver to use ns_to_timespec64() and
timespec64_to_ns() instead of open coding the same logic.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: Fix another case of LACPDU not sent on slave
Mahesh Bandewar [Mon, 30 Mar 2015 21:31:16 +0000 (14:31 -0700)]
bonding: Fix another case of LACPDU not sent on slave

When mii-mon discovers that the link is up, it will call
bond_3ad_handle_link_change() but we forget to add the LACP_ENABLED
flag when we discover the speed and duplex for the slave link are
normal.

Change-Id: Ie8b268ecfeea0f99bf9fdcd72706c0653f9d9e49
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: deprecate BOND_MONITOR_CHURNED in favor of existing definitions
Mahesh Bandewar [Mon, 30 Mar 2015 21:30:40 +0000 (14:30 -0700)]
bonding: deprecate BOND_MONITOR_CHURNED in favor of existing definitions

AD_PORT_ACTOR_CHURN and AD_PORT_PARTNER_CHURN are already present and
essentially BOND_MONITOR_CHURNED is a combination of these two definitions.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'macb-next'
David S. Miller [Tue, 31 Mar 2015 20:51:18 +0000 (16:51 -0400)]
Merge branch 'macb-next'

Nicolas Ferre says:

====================
net/macb: fixes after big driver update

The recent modifications to the macb driver lead to issues with the probe
function code flow. Here are some attempt to fix them.
This time, some more issues are fixed related to the clock as reported by Boris
Brezillon.

The series is written on top of net-next.

Changes in v2:
- address Cyrille comment about exit condition of queue configuration loop
- add fixes for probe sequence related to clocks
- add ethtool register dump
- fix peripheral version test
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: unify peripheral version testing
Nicolas Ferre [Tue, 31 Mar 2015 13:02:06 +0000 (15:02 +0200)]
net/macb: unify peripheral version testing

As we need to check peripheral version from the hardware during probe, I
introduce a little helper to unify these tests. It would prevent to
de-synchronize the test like previously observed.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: fix the peripheral version test
Nicolas Ferre [Tue, 31 Mar 2015 13:02:05 +0000 (15:02 +0200)]
net/macb: fix the peripheral version test

We currently need two checks of the peripheral version in MACB_MID register.
One of them got out of sync after modification by 8a013a9c71b2 (net: macb:
Include multi queue support for xilinx ZynqMP ethernet version).
Fix this in macb_configure_caps() so that xilinx ZynqMP will be considered
as a GEM flavor.

Fixes: 8a013a9c71b2 ("net: macb: Include multi queue support for xilinx ZynqMP
ethernet version")

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Cc: <stable@vger.kernel.org> #4.0 (if it doesn't make it for -final)
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: add the user i/o to ethtool register dump
Nicolas Ferre [Tue, 31 Mar 2015 13:02:04 +0000 (15:02 +0200)]
net/macb: add the user i/o to ethtool register dump

User i/o register EMAC_USRIO or GMAC_UR can be found on both macb and gem
flavors of the peripheral. By using the proper accessor, we can add it to the
register dump feature of ethtool.
Increment the version of this API so it can be noticed from user space.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: fix probe sequence to setup clocks earlier
Nicolas Ferre [Tue, 31 Mar 2015 13:02:03 +0000 (15:02 +0200)]
net/macb: fix probe sequence to setup clocks earlier

As accessing the peripheral registers need the clocks to be set, we have to
enable them as soon as possible. Their configuration depend on the type of
device used and determined by the DT compatible string. That lead to add
another initialization function in the DT configuration structure.
As the device private structure length depend on an information read in the
registers, we have to store the clock pointers in temporary variables before
feeding the structure fields.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: trivial: correct wording for caps
Nicolas Ferre [Tue, 31 Mar 2015 13:02:02 +0000 (15:02 +0200)]
net/macb: trivial: correct wording for caps

As a non-native English speaker, I would correct "capacities" of the macb
peripheral to "capabilities": correct me if I'm wrong!

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: fix capabilities configuration
Nicolas Ferre [Tue, 31 Mar 2015 13:02:01 +0000 (15:02 +0200)]
net/macb: fix capabilities configuration

Capabilities configuration by macb_configure_caps() was moved far too late by
421d9df0628b (net/macb: merge at91_ether driver into macb driver) which would
lead to badly configured hardware.
So, move this function to early probe and modify its prototype to re-gain its
original behavior.
DT data retrieval is also moved to simplify the probe code flow.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: add comment in macb_probe_queues
Nicolas Ferre [Tue, 31 Mar 2015 13:02:00 +0000 (15:02 +0200)]
net/macb: add comment in macb_probe_queues

As we access the MID register directly, we need to tell why
we don't use the macb_is_gem() dedicated function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/macb: only probe queues once and use stored values
Nicolas Ferre [Tue, 31 Mar 2015 13:01:59 +0000 (15:01 +0200)]
net/macb: only probe queues once and use stored values

When merging at91_ether and macb driver during 421d9df0628b (net/macb: merge
at91_ether driver into macb driver) the probe function has been split. The code
dealing with initialization of queues is now moved in macb_init() which needs
information computed in the parent macb_probe() function.
So, add the queue_mask information to the private structure and use it when
needed in macb_init().

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: smc91x: Remove an unused variable
Fabio Estevam [Mon, 30 Mar 2015 16:43:38 +0000 (13:43 -0300)]
net: smc91x: Remove an unused variable

Commit cb6e0b3690f48dff ("net: smc91x: make use of 4th parameter to devm_gpiod_get_index")
caused the following build warning:

drivers/net/ethernet/smsc/smc91x.c:2208:6: warning: unused variable 'res' [-Wunused-variable]

Remove the unused 'res' variable.

Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge tag 'mac80211-next-for-davem-2015-03-30' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Tue, 31 Mar 2015 20:39:04 +0000 (16:39 -0400)]
Merge tag 'mac80211-next-for-davem-2015-03-30' of git://git./linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Lots of updates for net-next; along with the usual flurry
of small fixes, cleanups and internal features we have:
 * VHT support for TDLS and IBSS (conditional on drivers though)
 * first TX performance improvements (the biggest will come later)
 * many suspend/resume (race) fixes
 * name_assign_type support from Tom Gundersen
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: rename dev to orig_dev in deliver_ptype_list_skb
Jiri Pirko [Mon, 30 Mar 2015 14:56:01 +0000 (16:56 +0200)]
net: rename dev to orig_dev in deliver_ptype_list_skb

Unlike other places, this function uses name "dev" for what should be
"orig_dev", which might be a bit confusing. So fix this.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'mlx4-next'
David S. Miller [Tue, 31 Mar 2015 20:36:51 +0000 (16:36 -0400)]
Merge branch 'mlx4-next'

Or Gerlitz says:

====================
mlx4: Extend statistics gathering and display

This series from Eran and Matan extends the statistics collected and later
reported to the user via ethtool for native mode and SRIOV PF.

More Packet statistics, PFC statistics and global pause statistics
are now displayed via ethtool.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Moderate ethtool callback to show more statistics
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:26 +0000 (17:45 +0300)]
net/mlx4_en: Moderate ethtool callback to show more statistics

More packet statistics are now calculated and visible to the user via
ethtool:

- RX packet errors statistics.
- TX/RX drops are now calculated.
- TX multicast and broadcast statistics.
- RX/TX per priority bytes statistics.
- RX/TX no vlan packets and bytes statistics.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Add Flow control statistics display via ethtool
Matan Barak [Mon, 30 Mar 2015 14:45:25 +0000 (17:45 +0300)]
net/mlx4_en: Add Flow control statistics display via ethtool

Flow control per priority and Global pause counters are now visible via
ethtool.  The counters shows statistics regarding pauses in the device.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Protect access to the statistics bitmap
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:24 +0000 (17:45 +0300)]
net/mlx4_en: Protect access to the statistics bitmap

This will allow parallel access to the statistics bitmap.
A pre-step for adding PFC counters, where the statistics bitmap
can be dynamically changed when modifying the PFC setting.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Support general selective view of ethtool statistics
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:23 +0000 (17:45 +0300)]
net/mlx4_en: Support general selective view of ethtool statistics

The driver uses a bitmask to indicate which statistics should be
displayed to the user in ethtool. The bitmask is u64, therefore we are
limited for a selective view of up to 64 statistics. Extend the bitmap
in order to show more than 64 statistics.

In addition, add packet statistics to the ethtool display for PF.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Move statistics bitmap setting to the Ethernet driver
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:22 +0000 (17:45 +0300)]
net/mlx4_en: Move statistics bitmap setting to the Ethernet driver

The statistics bitmap belongs to the Ethernet driver, move it there.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Create new header file for all statistics info
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:21 +0000 (17:45 +0300)]
net/mlx4_en: Create new header file for all statistics info

Add mlx4_stats.h file and move there all statistics structs and marcos.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet/mlx4_en: Fix port counters statistics bitmask
Eran Ben Elisha [Mon, 30 Mar 2015 14:45:20 +0000 (17:45 +0300)]
net/mlx4_en: Fix port counters statistics bitmask

Two counters (rx_chksum_complete and tx_chksum_offload) are not displayed
under SRIOV for the PF via ethtool because their bit mask is off, fix that.

Fixes: f8c6455bb ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE')
Fixes: 9fab426de ('mlx4: add a new xmit_more counter')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'bcmgenet-next'
David S. Miller [Tue, 31 Mar 2015 18:15:01 +0000 (14:15 -0400)]
Merge branch 'bcmgenet-next'

Petri Gynther says:

====================
net: bcmgenet: code cleanup

Five patches to clean up bcmgenet code:
1. add UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE
2. remove __bcmgenet_fini_dma()
3. fix bcmgenet_open()
4. add UMAC_IRQ_LINK_EVENT
5. fix the call to phy_mac_interrupt()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: fix the call to phy_mac_interrupt()
Petri Gynther [Mon, 30 Mar 2015 07:29:35 +0000 (00:29 -0700)]
net: bcmgenet: fix the call to phy_mac_interrupt()

On phy_mac_interrupt() call, the new_link parameter should be 0 or 1.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: add UMAC_IRQ_LINK_EVENT
Petri Gynther [Mon, 30 Mar 2015 07:29:24 +0000 (00:29 -0700)]
net: bcmgenet: add UMAC_IRQ_LINK_EVENT

Add #define UMAC_IRQ_LINK_EVENT to simplify link event handling code.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: fix bcmgenet_open()
Petri Gynther [Mon, 30 Mar 2015 07:29:13 +0000 (00:29 -0700)]
net: bcmgenet: fix bcmgenet_open()

If bcmgenet_init_dma() fails, it cleans up after itself. Rx and Tx
DMAs are off, and NAPI instances haven't been netif_napi_add()'ed.
Therefore, we need to skip calling bcmgenet_fini_dma() on the error
handling path. bcmgenet_resume() already does this correctly.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: remove __bcmgenet_fini_dma()
Petri Gynther [Mon, 30 Mar 2015 07:29:01 +0000 (00:29 -0700)]
net: bcmgenet: remove __bcmgenet_fini_dma()

bcmgenet_fini_dma() is the only caller of __bcmgenet_fini_dma().
Move __bcmgenet_fini_dma() code inside bcmgenet_fini_dma().

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonet: bcmgenet: add UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE
Petri Gynther [Mon, 30 Mar 2015 07:28:50 +0000 (00:28 -0700)]
net: bcmgenet: add UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE

Add #define for UMAC_IRQ_RXDMA_DONE and UMAC_IRQ_TXDMA_DONE in order
to simplify the code that handles Rx and Tx default queue interrupts.

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'hv_netvsc-next'
David S. Miller [Tue, 31 Mar 2015 18:12:37 +0000 (14:12 -0400)]
Merge branch 'hv_netvsc-next'

K. Y. Srinivasan says:

====================
hv_netvsc: Eliminate memory allocation in the send path

The network protocol used to communicate with the host is the remote ndis (rndis)
protocol. We need to decorate each outgoing packet with a rndis header and
additional rndis state (rndis per-packet state). To manage this state, we
currently allocate memory in the transmit path. Eliminate this allocation by
requesting additional head room in the skb.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agohv_netvsc: Eliminate memory allocation in the packet send path
KY Srinivasan [Mon, 30 Mar 2015 04:08:42 +0000 (21:08 -0700)]
hv_netvsc: Eliminate memory allocation in the packet send path

The network protocol used to communicate with the host is the remote ndis (rndis)
protocol. We need to decorate each outgoing packet with a rndis header and
additional rndis state (rndis per-packet state). To manage this state, we
currently allocate memory in the transmit path. Eliminate this allocation by
requesting additional head room in the skb.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agohv_netvsc: Cleanup the test for freeing skb when we use sendbuf mechanism
KY Srinivasan [Mon, 30 Mar 2015 04:08:41 +0000 (21:08 -0700)]
hv_netvsc: Cleanup the test for freeing skb when we use sendbuf mechanism

In preparation for embedding the rndis state and other packet state into
the skb, cleanup the test for freeing the skb.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoethernet: Use bool function returns of true/false instead of 1/0
Joe Perches [Mon, 30 Mar 2015 01:25:12 +0000 (18:25 -0700)]
ethernet: Use bool function returns of true/false instead of 1/0

Use bool constants as the return values instead of 1 and 0.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'nla_in_addr'
David S. Miller [Tue, 31 Mar 2015 17:58:36 +0000 (13:58 -0400)]
Merge branch 'nla_in_addr'

Jiri Benc says:

====================
netlink: access functions for IP address attributes

There are many places that read or write IP addresses to netlink attributes.
With IPv6 addresses, every such place currently has to use generic nla_put
and nla_memcpy. Implementing IPv6 address access functions simplify things
and makes the code more intelligible. IPv4 address access functions has
lesser value but it would be better to be consistent between IPv6 and IPv4
and they still serve as documentation.

The conversion is straightforward and the resulting patches are not that
large, thus I kept all the changes in the patches that introduce the access
functions. If anyone prefers to split the definition of access functions and
the conversion and/or break it out by network protocols, please let me know.

While doing the conversion, I came across ugly typecasting in
inetpeer_addr_base and xfrm_address_t when dealing with IPv6 addresses.
Instead of introducing more of this, I cleaned it up. Those are the first
two patches, serving as a prerequisite to the latter two.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetlink: implement nla_get_in_addr and nla_get_in6_addr
Jiri Benc [Sun, 29 Mar 2015 14:59:26 +0000 (16:59 +0200)]
netlink: implement nla_get_in_addr and nla_get_in6_addr

Those are counterparts to nla_put_in_addr and nla_put_in6_addr.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agonetlink: implement nla_put_in_addr and nla_put_in6_addr
Jiri Benc [Sun, 29 Mar 2015 14:59:25 +0000 (16:59 +0200)]
netlink: implement nla_put_in_addr and nla_put_in6_addr

IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoxfrm: simplify xfrm_address_t use
Jiri Benc [Sun, 29 Mar 2015 14:59:24 +0000 (16:59 +0200)]
xfrm: simplify xfrm_address_t use

In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.

Modifying the uapi header is okay, the union has still the same size.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agotcp: simplify inetpeer_addr_base use
Jiri Benc [Sun, 29 Mar 2015 14:59:23 +0000 (16:59 +0200)]
tcp: simplify inetpeer_addr_base use

In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and get rid
of the typecasting.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agovxlan: fix indentation
Jiri Benc [Sun, 29 Mar 2015 14:17:37 +0000 (16:17 +0200)]
vxlan: fix indentation

Some lines in vxlan code are indented by 7 spaces instead of a tab.

Fixes: e4c7ed415387 ("vxlan: add ipv6 support")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'ipv6_null'
David S. Miller [Tue, 31 Mar 2015 17:51:59 +0000 (13:51 -0400)]
Merge branch 'ipv6_null'

Ian Morris says:

====================
ipv6: coding style - comparisons with NULL

The following patches address some coding style issues only. No
functional changes and no changes detected by objdiff.

The IPV6 code uses multiple different styles when comparing with NULL
(I.e. x == NULL and !x as well as x != NULL and x). Generally the
latter form is preferred according to checkpatch and so this changes
aligns the code to this style.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: coding style: comparison for inequality with NULL
Ian Morris [Sun, 29 Mar 2015 13:00:05 +0000 (14:00 +0100)]
ipv6: coding style: comparison for inequality with NULL

The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x != NULL and sometimes as x. x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoipv6: coding style: comparison for equality with NULL
Ian Morris [Sun, 29 Mar 2015 13:00:04 +0000 (14:00 +0100)]
ipv6: coding style: comparison for equality with NULL

The ipv6 code uses a mixture of coding styles. In some instances check for NULL
pointer is done as x == NULL and sometimes as !x. !x is preferred according to
checkpatch and this patch makes the code consistent by adopting the latter
form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'bnx2x-next'
David S. Miller [Tue, 31 Mar 2015 17:34:15 +0000 (13:34 -0400)]
Merge branch 'bnx2x-next'

Yuval Mintz says:

====================
bnx2x: link and protection changes

This patch series contains 2 small additions to link configuration,
as well as a safeguard against loading the device on a hardware at
a failed state.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobnx2x: Prevent probe as early as possible
Yuval Mintz [Sun, 29 Mar 2015 07:05:01 +0000 (10:05 +0300)]
bnx2x: Prevent probe as early as possible

It's possible that due to errors [either on PCI or on device itself]
registers reads would fail, returning all-Fs.

This adds a check as early as possible so that driver will not read junk
values and make incorrect probe decisions according to them; instead,
gracefully fail the probe.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobnx2x: Count number of link changes
Yaniv Rosner [Sun, 29 Mar 2015 07:05:00 +0000 (10:05 +0300)]
bnx2x: Count number of link changes

Number of link changes are now being stored in shared memory [by all possible
link owners], for management use [as well as possible debug information for
dumps].

Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobnx2x: Configure IFir et al. according to nvram
Yaniv Rosner [Sun, 29 Mar 2015 07:04:59 +0000 (10:04 +0300)]
bnx2x: Configure IFir et al. according to nvram

Enable controlling Post2, coeff, IPreDriver and IFir according to NVRAM setup.

Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agobonding: Remove hardcoded initialization
Mahesh Bandewar [Sat, 28 Mar 2015 05:34:31 +0000 (22:34 -0700)]
bonding: Remove hardcoded initialization

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agofib_trie: Cleanup ip_fib_net_exit code path
Alexander Duyck [Fri, 27 Mar 2015 21:14:22 +0000 (14:14 -0700)]
fib_trie: Cleanup ip_fib_net_exit code path

While fixing a recent issue I noticed that we are doing some unnecessary
work inside the loop for ip_fib_net_exit.  As such I am pulling out the
initialization to NULL for the locally stored fib_local, fib_main, and
fib_default.

In addition I am restoring the original code for flushing the table as
there is no need to split up the fib_table_flush and hlist_del work since
the code for packing the tnodes with multiple key vectors was dropped.

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agofib_trie: Fix warning on fib4_rules_exit
Alexander Duyck [Fri, 27 Mar 2015 21:14:16 +0000 (14:14 -0700)]
fib_trie: Fix warning on fib4_rules_exit

This fixes the following warning:

 BUG: sleeping function called from invalid context at mm/slub.c:1268
 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u8:0
 INFO: lockdep is turned off.
 CPU: 3 PID: 6 Comm: kworker/u8:0 Tainted: G        W       4.0.0-rc5+ #895
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 Workqueue: netns cleanup_net
  0000000000000006 ffff88011953fa68 ffffffff81a203b6 000000002c3a2c39
  ffff88011952a680 ffff88011953fa98 ffffffff8109daf0 ffff8801186c6aa8
  ffffffff81fbc9e5 00000000000004f4 0000000000000000 ffff88011953fac8
 Call Trace:
  [<ffffffff81a203b6>] dump_stack+0x4c/0x65
  [<ffffffff8109daf0>] ___might_sleep+0x1c3/0x1cb
  [<ffffffff8109db70>] __might_sleep+0x78/0x80
  [<ffffffff8117a60e>] slab_pre_alloc_hook+0x31/0x8f
  [<ffffffff8117d4f6>] __kmalloc+0x69/0x14e
  [<ffffffff818ed0e1>] ? kzalloc.constprop.20+0xe/0x10
  [<ffffffff818ed0e1>] kzalloc.constprop.20+0xe/0x10
  [<ffffffff818ef622>] fib_trie_table+0x27/0x8b
  [<ffffffff818ef6bd>] fib_trie_unmerge+0x37/0x2a6
  [<ffffffff810b06e1>] ? arch_local_irq_save+0x9/0xc
  [<ffffffff818e9793>] fib_unmerge+0x2d/0xb3
  [<ffffffff818f5f56>] fib4_rule_delete+0x1f/0x52
  [<ffffffff817f1c3f>] ? fib_rules_unregister+0x30/0xb2
  [<ffffffff817f1c8b>] fib_rules_unregister+0x7c/0xb2
  [<ffffffff818f64a1>] fib4_rules_exit+0x15/0x18
  [<ffffffff818e8c0a>] ip_fib_net_exit+0x23/0xf2
  [<ffffffff818e91f8>] fib_net_exit+0x32/0x36
  [<ffffffff817c8352>] ops_exit_list+0x45/0x57
  [<ffffffff817c8d3d>] cleanup_net+0x13c/0x1cd
  [<ffffffff8108b05d>] process_one_work+0x255/0x4ad
  [<ffffffff8108af69>] ? process_one_work+0x161/0x4ad
  [<ffffffff8108b4b1>] worker_thread+0x1cd/0x2ab
  [<ffffffff8108b2e4>] ? process_scheduled_works+0x2f/0x2f
  [<ffffffff81090686>] kthread+0xd4/0xdc
  [<ffffffff8109ec8f>] ? local_clock+0x19/0x22
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83
  [<ffffffff81a2c0c8>] ret_from_fork+0x58/0x90
  [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83

The issue was that as a part of exiting the default rules were being
deleted which resulted in the local trie being unmerged.  By moving the
freeing of the FIB tables up we can avoid the unmerge since there is no
local table left when we call the fib4_rules_exit function.

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetoot...
David S. Miller [Tue, 31 Mar 2015 16:45:58 +0000 (12:45 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-27

Here's another set of Bluetooth & 802.15.4 patches for 4.1:

 - New API to control LE advertising data (i.e. peripheral role)
 - mac802154 & at86rf230 cleanups
 - Support for toggling quirks from debugfs (useful for testing)
 - Memory leak fix for LE scanning
 - Extra version info reading support for Broadcom controllers

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoMerge branch 'ptp-2038'
David S. Miller [Tue, 31 Mar 2015 16:01:21 +0000 (12:01 -0400)]
Merge branch 'ptp-2038'

Fixed two warnings in e1000e and igb, when switching to timespec64
some printf formats started to not match.  In theses cases actually
the new type is __kernel_time_t which is __kernel_long_t which
unfortunately can be either "long" or "long long".  So to solve
this I cases the arguments to "long long".  -DaveM

Richard Cochran says:

====================
ptp: get ready for 2038

This series converts the core driver methods of the PTP Hardware Clock
(PHC) subsystem to use the 64 bit version of the timespec structure,
making the core API ready for the year 2038.

In addition, I reviewed how each driver and device represents the time
value at the hardware register level.  Most of the drivers are ready,
but a few will need some work before the year 2038, as shown:

   Patch   Driver
   ------------------------------------------------
   12      drivers/net/ethernet/intel/igb/igb_ptp.c
   15 ?    drivers/net/ethernet/sfc/ptp.c
   16      drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c

The commit log messages document how each driver is ready or why it is
not ready.  For patch 15, I could not easily find out the hardware
representation of the time value, and so the SFC maintainers will have
to review their low level code in order to resolve any remaining
issues.

* ChangeLog
** V3
   - dp83640: use timespec64 throughout per Arnd's suggestion
   - tilegx: use timespec64 throughout per Chris' suggestion
   - add Jeff's acked-bys
** V2
   - use the new methods in the posix clock code right away (patch #3)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: remove 32 bit get/set methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:13 +0000 (23:12 +0200)]
ptp: remove 32 bit get/set methods.

All of the PHC drivers have been converted to the new methods.  This patch
converts the three remaining callers within the core code and removes the
older methods for good.  As a result, the core PHC code is ready for the
year 2038.  However, some of the PHC drivers are not quite ready yet.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: pch: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:12 +0000 (23:12 +0200)]
ptp: pch: convert to the 64 bit get/set time methods.

The device has a 64 bit clock register, where each clock tick is 32
nanoseconds, and so with this patch the driver is ready for the year
2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: ixp46x: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:11 +0000 (23:12 +0200)]
ptp: ixp46x: convert to the 64 bit get/set time methods.

The device has a 64 bit clock register, where each clock tick is 16
nanoseconds, and so with this patch the driver is ready for the year
2038.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: dp83640: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:10 +0000 (23:12 +0200)]
ptp: dp83640: convert to the 64 bit get/set time methods.

This device stores the number of seconds in a 32 bit register, and the
stored value is unsigned.  Therefore this driver and device are ready
for the year 2038.  However, more work will be needed prior to 2106.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: tilegx: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:09 +0000 (23:12 +0200)]
ptp: tilegx: convert to the 64 bit get/set time methods.

This driver is 64 bit only, and so this driver and device are ready
for 2038.  This patch changes the driver to the new PHC and also
carries the timespec64 parameter on out to the gxio_mpipe_get-
set_timestamp functions, making explicit the fact that the tv_sec
field is 64 bits wide.

Not even compile tested.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Chris Metcalf <cmetcalf@ezchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: cpts: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:08 +0000 (23:12 +0200)]
ptp: cpts: convert to the 64 bit get/set time methods.

This driver's clock is implemented using a timecounter, and so with
this patch the driver is ready for the year 2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: stmmac: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:07 +0000 (23:12 +0200)]
ptp: stmmac: convert to the 64 bit get/set time methods.

This device stores the number of seconds in a 32 bit register.  So
more work is needed on this driver before the year 2038 comes around.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: sfc: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:06 +0000 (23:12 +0200)]
ptp: sfc: convert to the 64 bit get/set time methods.

This patch changes the driver to use the newer API.

Depending on how the hardware represents a time value, this driver may
or may not yet be ready for the year 2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: mlx4: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:05 +0000 (23:12 +0200)]
ptp: mlx4: convert to the 64 bit get/set time methods.

This driver's clock is implemented using a timecounter, and so with
this patch the driver is ready for the year 2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: ixgbe: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:04 +0000 (23:12 +0200)]
ptp: ixgbe: convert to the 64 bit get/set time methods.

This driver's clock is implemented using a timecounter, and so with
this patch the driver is ready for the year 2038.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 years agoptp: igb: convert to the 64 bit get/set time methods.
Richard Cochran [Sun, 29 Mar 2015 21:12:03 +0000 (23:12 +0200)]
ptp: igb: convert to the 64 bit get/set time methods.

For the 82576, the driver's clock is implemented using a timecounter,
and so with this patch that device is ready for the year 2038.

However, in the case of the i210, the device stores the number of
seconds in a 32 bit register.  Therefore, more work is needed on this
driver before the year 2038 comes around.

Compile tested only.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>