ipv6: correctly add local routes when lo goes up

[ Upstream commit a220445f9f4382c36a53d8ef3e08165fa27f7e2c ]

The goal of the patch is to fix this scenario:
 ip link add dummy1 type dummy
 ip link set dummy1 up
 ip link set lo down ; ip link set lo up

After that sequence, the local route to the link layer address of dummy1 is
not there anymore.

When the loopback is set down, all local routes are deleted by
addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still
exists, because the corresponding idev has a reference on it. After the rcu
grace period, dst_rcu_free() is called, and thus ___dst_free(), which will
set obsolete to DST_OBSOLETE_DEAD.

In this case, init_loopback() is called before dst_rcu_free(), thus
obsolete is still sets to something <= 0. So, the function doesn't add the
route again. To avoid that race, let's check the rt6 refcnt instead.

Fixes: 25fb6ca4ed9c ("net IPv6 : Fix broken IPv6 routing table after loopback down-up")
Fixes: a881ae1f625c ("ipv6: don't call addrconf_dst_alloc again when enable lo")
Fixes: 33d99113b110 ("ipv6: reallocate addrconf router for ipv6 address when lo device up")
Reported-by: Francesco Santoro <francesco.santoro@6wind.com>
Reported-by: Samuel Gauthier <samuel.gauthier@6wind.com>
CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com>
CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com>
CC: Sabrina Dubroca <sd@queasysnail.net>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
CC: Weilong Chen <chenweilong@huawei.com>
CC: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: fix ip6_tnl_lookup

[ Upstream commit 68d00f332e0ba7f60f212be74ede290c9f873bc5 ]

The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel
endpoints.") introduces support for wildcards in tunnels endpoints,
but in some rare circumstances ip6_tnl_lookup selects wrong tunnel
interface relying only on source or destination address of the packet
and not checking presence of wildcard in tunnels endpoints. Later in
ip6_tnl_rcv this packets can be dicarded because of difference in
ipproto even if fallback device have proper ipproto configuration.

This patch adds checks of wildcard endpoint in tunnel avoiding such
behavior

Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: tcp: restore IP6CB for pktoptions skbs

[ Upstream commit 8ce48623f0cf3d632e32448411feddccb693d351 ]

Baozeng Ding reported following KASAN splat :

BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8
Read of size 1 by task poc/25548
Call Trace:
 [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15
 [<     inline     >] print_address_description /mm/kasan/report.c:204
 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283
 [<     inline     >] kasan_report /mm/kasan/report.c:303
 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321
 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687
 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40
 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150
 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230
 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035
 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647
 [<     inline     >] SYSC_getsockopt /net/socket.c:1776
 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758
 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6
Memory state around the buggy address:
 ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                              ^
 ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

He also provided a syzkaller reproducer.

Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB
data that was moved at a different place in tcp_v6_rcv()

This patch moves tcp_v6_restore_cb() up and calls it from
tcp_v6_do_rcv() when np->pktoptions is set.

Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netlink: do not enter direct reclaim from netlink_dump()

[ Upstream commit d35c99ff77ecb2eb239731b799386f3b3637a31e ]

Since linux-3.15, netlink_dump() can use up to 16384 bytes skb
allocations.

Due to struct skb_shared_info ~320 bytes overhead, we end up using
order-3 (on x86) page allocations, that might trigger direct reclaim and
add stress.

The intent was really to attempt a large allocation but immediately
fallback to a smaller one (order-1 on x86) in case of memory stress.

On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to
meet the goal. Old kernels would need to remove __GFP_WAIT

While we are at it, since we do an order-3 allocation, allow to use
all the allocated bytes instead of 16384 to reduce syscalls during
large dumps.

iproute2 already uses 32KB recvmsg() buffer sizes.

Alexei provided an initial patch downsizing to SKB_WITH_OVERHEAD(16384)

Fixes: 9063e21fb026 ("netlink: autosize skb lengthes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Reviewed-by: Greg Rose <grose@lightfleet.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: call fanout_release, while UNREGISTERING a netdev

[ Upstream commit 6664498280cf17a59c3e7cf1a931444c02633ed1 ]

If a socket has FANOUT sockopt set, a new proto_hook is registered
as part of fanout_add(). When processing a NETDEV_UNREGISTER event in
af_packet, __fanout_unlink is called for all sockets, but prot_hook which was
registered as part of fanout_add is not removed. Call fanout_release, on a
NETDEV_UNREGISTER, which removes prot_hook and removes fanout from the
fanout_list.

This fixes BUG_ON(!list_empty(&dev->ptype_specific)) in netdev_run_todo()

Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Add netdev all_adj_list refcnt propagation to fix panic

[ Upstream commit 93409033ae653f1c9a949202fb537ab095b2092f ]

This is a respin of a patch to fix a relatively easily reproducible kernel
panic related to the all_adj_list handling for netdevs in recent kernels.

The following sequence of commands will reproduce the issue:

ip link add link eth0 name eth0.100 type vlan id 100
ip link add link eth0 name eth0.200 type vlan id 200
ip link add name testbr type bridge
ip link set eth0.100 master testbr
ip link set eth0.200 master testbr
ip link add link testbr mac0 type macvlan
ip link delete dev testbr

This creates an upper/lower tree of (excuse the poor ASCII art):

            /---eth0.100-eth0
mac0-testbr-
            \---eth0.200-eth0

When testbr is deleted, the all_adj_lists are walked, and eth0 is deleted twice from
the mac0 list. Unfortunately, during setup in __netdev_upper_dev_link, only one
reference to eth0 is added, so this results in a panic.

This change adds reference count propagation so things are handled properly.

Matthias Schiffer reported a similar crash in batman-adv:

https://github.com/freifunk-gluon/gluon/issues/680
https://www.open-mesh.org/issues/247

which this patch also seems to resolve.

Signed-off-by: Andrew Collins <acollins@cradlepoint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sched: act_vlan: Push skb->data to mac_header prior calling skb_vlan_*() functions

[ Upstream commit f39acc84aad10710e89835c60d3b6694c43a8dd9 ]

Generic skb_vlan_push/skb_vlan_pop functions don't properly handle the
case where the input skb data pointer does not point at the mac header:

- They're doing push/pop, but fail to properly unwind data back to its
  original location.
  For example, in the skb_vlan_push case, any subsequent
  'skb_push(skb, skb->mac_len)' calls make the skb->data point 4 bytes
  BEFORE start of frame, leading to bogus frames that may be transmitted.

- They update rcsum per the added/removed 4 bytes tag.
  Alas if data is originally after the vlan/eth headers, then these
  bytes were already pulled out of the csum.

OTOH calling skb_vlan_push/skb_vlan_pop with skb->data at mac_header
present no issues.

act_vlan is the only caller to skb_vlan_*() that has skb->data pointing
at network header (upon ingress).
Other calles (ovs, bpf) already adjust skb->data at mac_header.

This patch fixes act_vlan to point to the mac_header prior calling
skb_vlan_*() functions, as other callers do.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Pravin Shelar <pshelar@ovn.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: pktgen: fix pkt_size

[ Upstream commit 63d75463c91a5b5be7c0aca11ceb45ea5a0ae81d ]

The commit 879c7220e828 ("net: pktgen: Observe needed_headroom
of the device") increased the 'pkt_overhead' field value by
LL_RESERVED_SPACE.
As a side effect the generated packet size, computed as:

/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 -
  pkt_dev->pkt_overhead;

is decreased by the same value.
The above changed slightly the behavior of existing pktgen users,
and made the procfs interface somewhat inconsistent.
Fix it by restoring the previous pkt_overhead value and using
LL_RESERVED_SPACE as extralen in skb allocation.
Also, change pktgen_alloc_skb() to only partially reserve
the headroom to allow the caller to prefetch from ll header
start.

v1 -> v2:
 - fixed some typos in the comments

Fixes: 879c7220e828 ("net: pktgen: Observe needed_headroom of the device")
Suggested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: set mac address unconditionally

[ Upstream commit b82d44d78480faff7456e9e0999acb9d38666057 ]

If the mac address origin is not dt, you can only safely assign a mac
address after "link up" of the device. If the link is off the clocks are
disabled and because of issues assigning registers when clocks are off the
new mac address cannot be written in .ndo_set_mac_address() on some soc's.
This fix sets the mac address unconditionally in fec_restart(...) and
ensures consistency between fec registers and the network layer.

Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Avoid NULL pointer dereference in tg3_io_error_detected()

[ Upstream commit 1b0ff89852d79354e8a091c81a88df21f5aa9f0a ]

While the driver is probing the adapter, an error may occur before the
netdev structure is allocated and attached to pci_dev. In this case,
not only netdev isn't available, but the tg3 private structure is also
not available as it is just math from the NULL pointer, so dereferences
must be skipped.

The following trace is seen when the error is triggered:

  [1.402247] Unable to handle kernel paging request for data at address 0x00001a99
  [1.402410] Faulting instruction address: 0xc0000000007e33f8
  [1.402450] Oops: Kernel access of bad area, sig: 11 [#1]
  [1.402481] SMP NR_CPUS=2048 NUMA PowerNV
  [1.402513] Modules linked in:
  [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu
  [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000
  [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0
  [1.402787] REGS: c000001fe4e8b790 TRAP: 0300   Not tainted  (4.4.0-36-generic)
  [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 28000422  XER: 20000000
  [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1
  GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000
  GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299
  GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006
  GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768
  GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002
  GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000
  [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340
  [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340

This patch avoids the NULL pointer dereference by moving the access after
the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a
check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan].

Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery")
Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error")
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route

[ Upstream commit 2cf750704bb6d7ed8c7d732e071dd1bc890ea5e8 ]

Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid
instead of the previous dst_pid which was copied from in_skb's portid.
Since the skb is new the portid is 0 at that point so the packets are sent
to the kernel and we get scheduling while atomic or a deadlock (depending
on where it happens) by trying to acquire rtnl two times.
Also since this is RTM_GETROUTE, it can be triggered by a normal user.

Here's the sleeping while atomic trace:
[ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0
[ 7858.212881] 2 locks held by swapper/0/0:
[ 7858.213013]  #0:  (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350
[ 7858.213422]  #1:  (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130
[ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179
[ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 7858.214108]  0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000
[ 7858.214412]  ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e
[ 7858.214716]  000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f
[ 7858.215251] Call Trace:
[ 7858.215412]  <IRQ>  [<ffffffff813a7804>] dump_stack+0x85/0xc1
[ 7858.215662]  [<ffffffff810a4a72>] ___might_sleep+0x192/0x250
[ 7858.215868]  [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100
[ 7858.216072]  [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0
[ 7858.216279]  [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460
[ 7858.216487]  [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40
[ 7858.216687]  [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260
[ 7858.216900]  [<ffffffff81573c70>] rtnl_unicast+0x20/0x30
[ 7858.217128]  [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0
[ 7858.217351]  [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130
[ 7858.217581]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217785]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.217990]  [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350
[ 7858.218192]  [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350
[ 7858.218415]  [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180
[ 7858.218656]  [<ffffffff810fde10>] run_timer_softirq+0x260/0x640
[ 7858.218865]  [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f
[ 7858.219068]  [<ffffffff816637c8>] __do_softirq+0xe8/0x54f
[ 7858.219269]  [<ffffffff8107a948>] irq_exit+0xb8/0xc0
[ 7858.219463]  [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50
[ 7858.219678]  [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0
[ 7858.219897]  <EOI>  [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10
[ 7858.220165]  [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10
[ 7858.220373]  [<ffffffff810298e3>] default_idle+0x23/0x190
[ 7858.220574]  [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20
[ 7858.220790]  [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60
[ 7858.221016]  [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0
[ 7858.221257]  [<ffffffff8164f995>] rest_init+0x135/0x140
[ 7858.221469]  [<ffffffff81f83014>] start_kernel+0x50e/0x51b
[ 7858.221670]  [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120
[ 7858.221894]  [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c
[ 7858.222113]  [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a

Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()

[ Upstream commit db32e4e49ce2b0e5fcc17803d011a401c0a637f6 ]

Similar to commit 3be07244b733 ("ip6_gre: fix flowi6_proto value in
xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup.

Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value.
This affected output route lookup for packets sent on an ip6gretap device
in cases where routing was dependent on the value of flowi6_proto.

Since the correct proto is already set in the tunnel flowi6 template via
commit 252f3f5a1189 ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit
path."), simply delete the line setting the incorrect flowi6_proto value.

Suggested-by: Jiri Benc <jbenc@redhat.com>
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix a compile error in DBGUNDO()

[ Upstream commit 019b1c9fe32a2a32c1153e31375f87ec3e591273 ]

If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile
error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr

Fixes: efe4208f47f9 ("ipv6: make lookups simpler and faster")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix wrong checksum calculation on MTU probing

[ Upstream commit 2fe664f1fcf7c4da6891f95708a7a56d3c024354 ]

With TCP MTU probing enabled and offload TX checksumming disabled,
tcp_mtu_probe() calculated the wrong checksum when a fragment being copied
into the probe's SKB had an odd length. This was caused by the direct use
of skb_copy_and_csum_bits() to calculate the checksum, as it pads the
fragment being copied, if needed. When this fragment was not the last, a
subsequent call used the previous checksum without considering this
padding.

The effect was a stale connection in one way, as even retransmissions
wouldn't solve the problem, because the checksum was never recalculated for
the full SKB length.

Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid sk_forward_alloc overflows

[ Upstream commit 20c64d5cd5a2bdcdc8982a06cb05e5e1bd851a3d ]

A malicious TCP receiver, sending SACK, can force the sender to split
skbs in write queue and increase its memory usage.

Then, when socket is closed and its write queue purged, we might
overflow sk_forward_alloc (It becomes negative)

sk_mem_reclaim() does nothing in this case, and more than 2GB
are leaked from TCP perspective (tcp_memory_allocated is not changed)

Then warnings trigger from inet_sock_destruct() and
sk_stream_kill_queues() seeing a not zero sk_forward_alloc

All TCP stack can be stuck because TCP is under memory pressure.

A simple fix is to preemptively reclaim from sk_mem_uncharge().

This makes sure a socket wont have more than 2 MB forward allocated,
after burst and idle period.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix overflow in __tcp_retransmit_skb()

[ Upstream commit ffb4d6c8508657824bcef68a36b2a0f9d8c09d10 ]

If a TCP socket gets a large write queue, an overflow can happen
in a test in __tcp_retransmit_skb() preventing all retransmits.

The flow then stalls and resets after timeouts.

Tested:

sysctl -w net.core.wmem_max=1000000000
netperf -H dest -- -s 1000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.31

HID: usbhid: add ATEN CS962 to list of quirky devices

commit cf0ea4da4c7df11f7a508b2f37518e0f117f3791 upstream.

Like many similar devices it needs a quirk to work.
Issuing the request gets the device into an irrecoverable state.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()

commit 40b6e61ac72e99672e47cdb99c8d7d226004169b upstream.

Commit e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already
exists") introduced a bug by changing the possible error codes returned
by add_vol():
- this function no longer returns NULL in case of allocation failure
  but return ERR_PTR(-ENOMEM)
- when a duplicate entry in the volume RB tree is found it returns
  ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL)

Fix the tests done on add_vol() return val to match this new behavior.

Fixes: e96a8a3bb671 ("UBI: Fastmap: Do not add vol if it already exists")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: Check memopp before dereference (CVE-2016-8630)

commit d9092f52d7e61dd1557f2db2400ddb430e85937e upstream.

Commit 41061cdb98 ("KVM: emulate: do not initialize memopp") removes a
check for non-NULL under incorrect assumptions. An undefined instruction
with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt
to dereference a null pointer here.

Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5
Message-Id: <1477592752-126650-2-git-send-email-osh@google.com>
Signed-off-by: Owen Hofmann <osh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: vt, fix bogus division in csi_J

commit 42acfc6615f47e465731c263bee0c799edb098f2 upstream.

In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is
divided by 2 inappropriatelly. But scr_memsetw expects size, not
count, because it divides the size by 2 on its own before doing actual
memset-by-words.

So remove the bogus division.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Petr Písař <ppisar@redhat.com>
Fixes: f8df13e0a9 (tty: Clean console safely)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Fix size used in dma_free_coherent()

commit 51fbc7c06c8900370c6da5fc4a4685add8fa4fb0 upstream.

In commit 2abd9d5fa60f9 ("usb: dwc3: ep0: Add chained TRB support"), the
size of the memory allocated with 'dma_alloc_coherent()' has been modified
but the corresponding calls to 'dma_free_coherent()' have not been updated
accordingly.

This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@

*   ret = dma_alloc_coherent(x0, y0, z0, t0);
    ...
*   dma_free_coherent(x1, y1, ret, t1);

@script:python@
y0 << r.y0;
y1 << r.y1;

@@
if y1.find(y0) == -1:
 print "WARNING: sizes look different:  '%s'   vs   '%s'" % (y0, y1)
////////////////////

Fixes: 2abd9d5fa60f9 ("usb: dwc3: ep0: Add chained TRB support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pwm: Unexport children before chip removal

commit 0733424c9ba9f42242409d1ece780777272f7ea1 upstream.

Exported pwm channels aren't removed before the pwmchip and are
leaked. This results in invalid sysfs files. This fix removes
all exported pwm channels before chip removal.

Signed-off-by: David Hsu <davidhsu@google.com>
Fixes: 76abbdde2d95 ("pwm: Add sysfs interface")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header

commit ecbfa8eabae9cd73522d1d3d15869703c263d859 upstream.

scan_pool() does not mark the PEB for scrubing when bitflips are
detected in the EC header of a free PEB (VID header region left to
0xff).
Make sure we scrub the PEB in this case.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Disable "frame-address" warning

commit 124a3d88fa20e1869fc229d7d8c740cc81944264 upstream.

Newer versions of gcc warn about the use of __builtin_return_address()
with a non-zero argument when "-Wall" is specified:

  kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’:
  kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address]
     stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
  [ .. repeats a few times for other similar cases .. ]

It is true that a non-zero argument is somewhat dangerous, and we do not
actually have very many uses of that in the kernel - but the ftrace code
does use it, and as Stephen Rostedt says:

 "We are well aware of the danger of using __builtin_return_address() of
  > 0.  In fact that's part of the reason for having the "thunk" code in
  x86 (See arch/x86/entry/thunk_{64,32}.S).  [..] it adds extra frames
  when tracking irqs off sections, to prevent __builtin_return_address()
  from accessing bad areas.  In fact the thunk_32.S states: 'Trampoline to
  trace irqs off.  (otherwise CALLER_ADDR1 might crash)'."

For now, __builtin_return_address() with a non-zero argument is the best
we can do, and the warning is not helpful and can end up making people
miss other warnings for real problems.

So disable the frame-address warning on compilers that need it.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smc91x: avoid self-comparison warning

commit e3ebd894f084255fde19116955ba7054858ff5d6 upstream.

The smc91x driver defines a macro that compares its argument to
itself, apparently to get a true result while using its argument
to avoid a warning about unused local variables.

Unfortunately, this triggers a warning with gcc-6, as the comparison
is obviously useless:

drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt':
drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare]
  if (!smc_special_trylock(&lp->lock, flags)) {

This replaces the macro with another one that behaves similarly,
with a cast to (void) to ensure the argument is used, and using
a literal 'true' as its value.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: avoid false positive gcc-6 warning

commit cfe02a8a973e7e5f66926b8ae38dfce404b19e29 upstream.

When all subsystems are disabled, gcc notices that cgroup_subsys_enabled_key
is a zero-length array and that any access to it must be out of bounds:

In file included from ../include/linux/cgroup.h:19:0,
                 from ../kernel/cgroup.c:31:
../kernel/cgroup.c: In function 'cgroup_add_cftypes':
../kernel/cgroup.c:261:53: error: array subscript is above array bounds [-Werror=array-bounds]
  return static_key_enabled(cgroup_subsys_enabled_key[ssid]);
                            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
../include/linux/jump_label.h:271:40: note: in definition of macro 'static_key_enabled'
  static_key_count((struct static_key *)x) > 0;    \
                                        ^

We should never call the function in this particular case, so this is
not a bug. In order to silence the warning, this adds an explicit check
for the CGROUP_SUBSYS_COUNT==0 case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: fix error handling in exynos_drm_subdrv_open

commit 55c4b906aa2aec3fa66310ec03c6842e34a04b2a upstream.

gcc-6 warns about a pointless loop in exynos_drm_subdrv_open:

drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open':
drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare]
  list_for_each_entry_reverse(subdrv, &subdrv->list, list) {

Here, the list_for_each_entry_reverse immediately terminates because
the subdrv pointer is compared to itself as the loop end condition.

If we were to take the current subdrv pointer as the start of the
list (as we would do if list_for_each_entry_reverse() was not a macro),
we would iterate backwards over the &exynos_drm_subdrv_list anchor,
which would be even worse.

Instead, we need to use list_for_each_entry_continue_reverse()
to go back over each subdrv that was successfully opened until
the first entry.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/cma: silence warnings due to max() usage

commit badbda53e505089062e194c614e6f23450bc98b2 upstream.

pageblock_order can be (at least) an unsigned int or an unsigned long
depending on the kernel config and architecture, so use max_t(unsigned
long, ...) when comparing it.

fixes these warnings:

In file included from include/asm-generic/bug.h:13:0,
                 from arch/powerpc/include/asm/bug.h:127,
                 from include/linux/bug.h:4,
                 from include/linux/mmdebug.h:4,
                 from include/linux/mm.h:8,
                 from include/linux/memblock.h:18,
                 from mm/cma.c:28:
mm/cma.c: In function 'cma_init_reserved_mem':
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
mm/cma.c:186:27: note: in expansion of macro 'max'
  alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
                           ^
mm/cma.c: In function 'cma_declare_contiguous':
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
include/linux/kernel.h:747:9: note: in definition of macro 'max'
  typeof(y) _max2 = (y);            ^
mm/cma.c:270:29: note: in expansion of macro 'max'
   (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
                             ^
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
include/linux/kernel.h:747:21: note: in definition of macro 'max'
  typeof(y) _max2 = (y);                        ^
mm/cma.c:270:29: note: in expansion of macro 'max'
   (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
                             ^

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.au
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8584/1: floppy: avoid gcc-6 warning

commit dd665be0e243873343a28e18f9f345927b658daf upstream.

gcc-6.0 warns about comparisons between two identical expressions,
which is what we get in the floppy driver when writing to the FD_DOR
register:

drivers/block/floppy.c: In function 'set_dor':
drivers/block/floppy.c:810:44: error: self-comparison always evaluates to true [-Werror=tautological-compare]
   fd_outb(newdor, FD_DOR);

It would be nice to use a static inline function instead of the
macro, to avoid the warning, but we cannot do that because the
FD_DOR definition is incomplete at this point.

Adding a cast to (u32) is a harmless way to shut up the warning,
just not very nice.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/ptrace: Fix out of bounds array access warning

commit 1e407ee3b21f981140491d5b8a36422979ca246f upstream.

gcc-6 correctly warns about a out of bounds access

arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
        offsetof(struct thread_fp_state, fpr[32][0]));
                        ^

check the end of array instead of beginning of next element to fix this

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()

commit 1cf38741308c64d08553602b3374fb39224eeb5a upstream.

xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf build: Fix traceevent plugins build race

commit 67befc652845c8ffbefc8d173a6e6ced14d472f1 upstream.

Ingo reported following build failure:

  $ make clean install
  ...
    CC       plugin_kmem.o
  fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory
  /home/mingo/tip/tools/build/Makefile.build:77: recipe for target
  'plugin_hrtimer.o' failed
  make[3]: *** [plugin_hrtimer.o] Error 2
  Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed
  make[2]: *** [plugin_hrtimer-in.o] Error 2
  Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed
  make[1]: *** [libtraceevent_plugins] Error 2
  make[1]: *** Waiting for unfinished jobs....

Currently we have the install-traceevent-plugins target being dependent
on $(LIBTRACEEVENT), which will actualy not build any plugin. So the
install-traceevent-plugins target itself will try to build plugins,
but..

Plugins built is also triggered by perf build itself via
libtraceevent_plugins target.

This might cause a race having one make thread removing temp files from
another and result in above error. Fixing this by having proper plugins
build dependency before installing plugins.

Reported-and-Tested-by:: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Check peer device type before attempting EDID read

commit 4da5caa6a6f82cda3193bca855235b87debf78bd upstream.

Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: drop register readback in cayman_cp_int_cntl_setup

commit 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e upstream.

The read is taking a considerable amount of time (about 50us on this
machine). The register does not ever hold anything other than the ring
ID that is updated in this exact function, so there is no need for
the read modify write cycle.

This chops off a big chunk of the time spent in hardirq disabled
context, as this function is called multiple times in the interrupt
handler. With this change applied radeon won't show up in the list
of the worst IRQ latency offenders anymore, where it was a regular
before.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/si_dpm: workaround for SI kickers

commit 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e upstream.

Consolidate existing quirks. Fixes stability issues
on some kickers.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/si_dpm: Limit clocks on HD86xx part

commit fb9a5b0c1c9893db2e0d18544fd49e19d784a87d upstream.

Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/radeon: fix DP link training issue with second 4K monitor"

commit 9dc79965b21967caebde575f5f5d8bf1aa2c23ab upstream.

This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b.

It caused at least some Kaveri laptops to incorrectly report DisplayPort
connectors as connected.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference

commit 45c7a4908a307a023e237a64a3eadcafc4836493 upstream.

platform_get_resource can be returned the NULL pointer.
Then regs->start should be referred to NULL Pointer.
devm_ioremap_resource() checks whether res is NULL or not.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware

commit 2bf7dc8443e113844d078fd6541b7f4aa544f92f upstream.

The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller
firmware. Depending on how drive caches are handled internally by
controller firmware this could potentially lead to data integrity
problems.

Ensure that cache flushes are passed to the controller.

[mkp: applied by hand and removed unused vars]

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reported-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded

commit 4d2b496f19f3c2cfaca1e8fa0710688b5ff3811d upstream.

map_storep was not being vfree()'d in the module_exit call.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices

commit 1e793f6fc0db920400574211c48f9157a37e3945 upstream.

Commit 02b01e010afe ("megaraid_sas: return sync cache call with
success") modified the driver to successfully complete SYNCHRONIZE_CACHE
commands without passing them to the controller. Disk drive caches are
only explicitly managed by controller firmware when operating in RAID
mode. So this commit effectively disabled writeback cache flushing for
any drives used in JBOD mode, leading to data integrity failures.

[mkp: clarified patch description]

Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: discard multicast and 4-addr A-MSDUs

commit ea720935cf6686f72def9d322298bf7e9bd53377 upstream.

In mac80211, multicast A-MSDUs are accepted in many cases that
they shouldn't be accepted in:
 * drop A-MSDUs with a multicast A1 (RA), as required by the
   spec in 9.11 (802.11-2012 version)
 * drop A-MSDUs with a 4-addr header, since the fourth address
   can't actually be useful for them; unless 4-address frame
   format is actually requested, even though the fourth address
   is still not useful in this case, but ignored

Accepting the first case, in particular, is very problematic
since it allows anyone else with possession of a GTK to send
unicast frames encapsulated in a multicast A-MSDU, even when
the AP has client isolation enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: net: fix fragmented datagram_size off-by-one

commit e9300a4b7bbae83af1f7703938c94cf6dc6d308f upstream.

RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:

    datagram_size:  The encoded size of the entire IP datagram.  The
    value of datagram_size [...] SHALL be one less than the value of
    Total Length in the datagram's IP header (see STD 5, RFC 791).

Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:

    ether1394_tx() /* transmit */
        ether1394_encapsulate_prep()
            hdr->ff.dg_size = dg_size - 1;

    ether1394_data_handler() /* receive */
        if (hdr->common.lf == ETH1394_HDR_LF_FF)
            dg_size = hdr->ff.dg_size + 1;
        else
            dg_size = hdr->sf.dg_size + 1;

Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.

Only firewire-net sets and gets datagram_size without this offset.  The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394.  (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
  - from OS X fail entirely,
  - from Win XP start out with a bunch of fragmented datagrams which
    time out, then continue with unfragmented datagrams because Win XP
    temporarily reduces the MTU to 576 bytes.

So let's fix firewire-net's datagram_size accessors.

Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed.  (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: net: guard against rx buffer overflows

commit 667121ace9dbafb368618dbabcf07901c962ddac upstream.

The IP-over-1394 driver firewire-net lacked input validation when
handling incoming fragmented datagrams.  A maliciously formed fragment
with a respectively large datagram_offset would cause a memcpy past the
datagram buffer.

So, drop any packets carrying a fragment with offset + length larger
than datagram_size.

In addition, ensure that
  - GASP header, unfragmented encapsulation header, or fragment
    encapsulation header actually exists before we access it,
  - the encapsulated datagram or fragment is of nonzero size.

Reported-by: Eyal Itkin <eyal.itkin@gmail.com>
Reviewed-by: Eyal Itkin <eyal.itkin@gmail.com>
Fixes: CVE 2016-8633
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add XMG C504 to keyboard reset table

commit da25311c7ca8b0254a686fc0d597075b9aa3b683 upstream.

The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.

With this patch the touchpad is detected:

$ dmesg | grep -E "(i8042|Elantech|elantech)"

[    2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.680372] i8042: Attempting to reset device connected to KBD port
[    2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[    3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[    3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6

Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mirror: fix read error on recovery after default leg failure

commit dcb2ff56417362c31f6b430c3c531a84581e8721 upstream.

If a default leg has failed, any read will cause a new operational
default leg to be selected and the read is resubmitted.  But until now
the read will return failure even though it was successful due to
resubmission.  The reason for this is bio->bi_error was not being
cleared before resubmitting the bio.

Fix by clearing bio->bi_error before resubmission.

Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: console: Unlock vqs while freeing buffers

commit 34563769e438d2881f62cf4d9badc4e589ac0ec0 upstream.

Commit c6017e793b93 ("virtio: console: add locks around buffer removal
in port unplug path") added locking around the freeing of buffers in the
vq. However, when free_buf() is called with can_sleep = true and rproc
is enabled, it calls dma_free_coherent() directly, requiring interrupts
to be enabled. Currently a WARNING is triggered due to the spin locking
around free_buf, with a call stack like this:

WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433
free_buf+0x1a8/0x288
Call Trace:
[<8040c538>] show_stack+0x74/0xc0
[<80757240>] dump_stack+0xd0/0x110
[<80430d98>] __warn+0xfc/0x130
[<80430ee0>] warn_slowpath_null+0x2c/0x3c
[<807e7c6c>] free_buf+0x1a8/0x288
[<807ea590>] remove_port_data+0x50/0xac
[<807ea6a0>] unplug_port+0xb4/0x1bc
[<807ea858>] virtcons_remove+0xb0/0xfc
[<807b6734>] virtio_dev_remove+0x58/0xc0
[<807f918c>] __device_release_driver+0xac/0x134
[<807f924c>] device_release_driver+0x38/0x50
[<807f7edc>] bus_remove_device+0xfc/0x130
[<807f4b74>] device_del+0x17c/0x21c
[<807f4c38>] device_unregister+0x24/0x38
[<807b6b50>] unregister_virtio_device+0x28/0x44

Fix this by restructuring the loops to allow the locks to only be taken
where it is necessary to protect the vqs, and release it while the
buffer is being freed.

Fixes: c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: Make interrupt suppression spec compliant

commit 0ea1e4a6d9b62cf29e210d2b4ba9fd43917522e3 upstream.

According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is
negotiated the driver MUST set flags to 0. Not dirtying the available
ring in virtqueue_disable_cb also has a minor positive performance
impact, improving L1 dcache load missed by ~0.5% in vring_bench.

Writes to the used event field (vring_used_event) are still unconditional.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Ensure consistent state when switching to kernel stack at syscall entry

commit 6ed518328d0189e0fdf1bb7c73290d546143ea66 upstream.

We have one critical section in the syscall entry path in which we switch from
the userspace stack to kernel stack. In the event of an external interrupt, the
interrupt code distinguishes between those two states by analyzing the value of
sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that
the value of sr7 is in sync with the currently enabled stack.

This patch now disables interrupts while executing the critical section.  This
prevents the interrupt handler to possibly see an inconsistent state which in
the worst case can lead to crashes.

Interestingly, in the syscall exit path interrupts were already disabled in the
critical section which switches back to the userspace stack.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fsync after copy-up

commit 641089c1549d8d3df0b047b5de7e9a111362cdce upstream.

Make sure the copied up file hits the disk before renaming to the final
destination.  If this is not done then the copy-up may corrupt the data in
the file in case of a crash.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MIPS: Make ERET handle ERL before EXL

commit ede5f3e7b54a4347be4d8525269eae50902bd7cd upstream.

The ERET instruction to return from exception is used for returning from
exception level (Status.EXL) and error level (Status.ERL). If both bits
are set however we should be returning from ERL first, as ERL can
interrupt EXL, for example when an NMI is taken. KVM however checks EXL
first.

Fix the order of the checks to match the pseudocode in the instruction
set manual.

Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix wbinvd_dirty_mask use-after-free

commit bd768e146624cbec7122ed15dead8daa137d909d upstream.

vcpu->arch.wbinvd_dirty_mask may still be used after freeing it,
corrupting memory. For example, the following call trace may set a bit
in an already freed cpu mask:
    kvm_arch_vcpu_load
    vcpu_load
    vmx_free_vcpu_nested
    vmx_free_vcpu
    kvm_arch_vcpu_free

Fix this by deferring freeing of wbinvd_dirty_mask.

Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: free io_barrier after blk_cleanup_queue call

commit d09960b0032174eb493c4c13be5b9c9ef36dc9a7 upstream.

dm_old_request_fn() has paths that access md->io_barrier.  The party
destroying io_barrier should ensure that no future execution of
dm_old_request_fn() is possible.  Move io_barrier destruction to below
blk_cleanup_queue() to ensure this and avoid a NULL pointer crash during
request-based DM device shutdown.

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix tiocmget error handling

commit de24e0a108bc48062e1c7acaa97014bce32a919f upstream.

The current tiocmget implementation would fail to report errors up the
stack and instead leaked a few bits from the stack as a mask of
modem-status flags.

Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: limit terminal size to 4M chars

commit 32b2921e6a7461fe63b71217067a6cf4bddb132f upstream.

Size of kmalloc() in vc_do_resize() is controlled by user.
Too large kmalloc() size triggers WARNING message on console.
Put a reasonable upper bound on terminal size to prevent WARNINGs.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
CC: David Rientjes <rientjes@google.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Cc: syzkaller@googlegroups.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: add restart quirk for Intel Wildcatpoint PCH

commit 4c39135aa412d2f1381e43802523da110ca7855c upstream.

xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the
same quirks to prevent machines from spurious restart while
shutting them down.

Reported-by: Hasan Mahmood <hasan.mahm@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv: do not lose pending heartbeat vmbus packets

commit 407a3aee6ee2d2cb46d9ba3fc380bc29f35d020c upstream.

The host keeps sending heartbeat packets independent of the
guest responding to them.  Even though we respond to the heartbeat messages at
interrupt level, we can have situations where there maybe multiple heartbeat
messages pending that have not been responded to. For instance this occurs when the
VM is paused and the host continues to send the heartbeat messages.
Address this issue by draining and responding to all
the heartbeat messages that maybe pending.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: clear selection before resizing

commit 009e39ae44f4191188aeb6dfbf661b771dbbe515 upstream.

When resizing a vt its selection may exceed the new size, resulting in
an invalid memory access [1]. Clear the selection before resizing.

[1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.com

Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix potential infoleak in older kernels

Not upstream as it is not needed there.

So a patch something like this might be a safe way to fix the
potential infoleak in older kernels.

THIS IS UNTESTED. It's a very obvious patch, though, so if it compiles
it probably works. It just initializes the output variable with 0 in
the inline asm description, instead of doing it in the exception
handler.

It will generate slightly worse code (a few unnecessary ALU
operations), but it doesn't have any interactions with the exception
handler implementation.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GenWQE: Fix bad page access during abort of resource allocation

commit a7a7aeefbca2982586ba2c9fd7739b96416a6d1d upstream.

When interrupting an application which was allocating DMAable
memory, it was possible, that the DMA memory was deallocated
twice, leading to the error symptoms below.

Thanks to Gerald, who analyzed the problem and provided this
patch.

I agree with his analysis of the problem: ddcb_cmd_fixups() ->
genwqe_alloc_sync_sgl() (fails in f/lpage, but sgl->sgl != NULL
and f/lpage maybe also != NULL) -> ddcb_cmd_cleanup() ->
genwqe_free_sync_sgl() (double free, because sgl->sgl != NULL and
f/lpage maybe also != NULL)

In this scenario we would have exactly the kind of double free that
would explain the WARNING / Bad page state, and as expected it is
caused by broken error handling (cleanup).

Using the Ubuntu git source, tag Ubuntu-4.4.0-33.52, he was able to reproduce
the "Bad page state" issue, and with the patch on top he could not reproduce
it any more.

------------[ cut here ]------------
WARNING: at /build/linux-o03cxz/linux-4.4.0/arch/s390/include/asm/pci_dma.h:141
Modules linked in: qeth_l2 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common genwqe_card qeth crc_itu_t qdio ccwgroup vmur dm_multipath dasd_eckd_mod dasd_mod
CPU: 2 PID: 3293 Comm: genwqe_gunzip Not tainted 4.4.0-33-generic #52-Ubuntu
task: 0000000032c7e270 ti: 00000000324e4000 task.ti: 00000000324e4000
Krnl PSW : 0404c00180000000 0000000000156346 (dma_update_cpu_trans+0x9e/0xa8)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS: 00000000324e7bcd 0000000000c3c34a 0000000027628298 000000003215b400
           0000000000000400 0000000000001fff 0000000000000400 0000000116853000
           07000000324e7b1e 0000000000000001 0000000000000001 0000000000000001
           0000000000001000 0000000116854000 0000000000156402 00000000324e7a38
Krnl Code: 000000000015633a: 95001000           cli     0(%r1),0
           000000000015633e: a774ffc3           brc     7,1562c4
          #0000000000156342: a7f40001           brc     15,156344
          >0000000000156346: 92011000           mvi     0(%r1),1
           000000000015634a: a7f4ffbd           brc     15,1562c4
           000000000015634e: 0707               bcr     0,%r7
           0000000000156350: c00400000000       brcl    0,156350
           0000000000156356: eb7ff0500024       stmg    %r7,%r15,80(%r15)
Call Trace:
([<00000000001563e0>] dma_update_trans+0x90/0x228)
 [<00000000001565dc>] s390_dma_unmap_pages+0x64/0x160
 [<00000000001567c2>] s390_dma_free+0x62/0x98
 [<000003ff801310ce>] __genwqe_free_consistent+0x56/0x70 [genwqe_card]
 [<000003ff801316d0>] genwqe_free_sync_sgl+0xf8/0x160 [genwqe_card]
 [<000003ff8012bd6e>] ddcb_cmd_cleanup+0x86/0xa8 [genwqe_card]
 [<000003ff8012c1c0>] do_execute_ddcb+0x110/0x348 [genwqe_card]
 [<000003ff8012c914>] genwqe_ioctl+0x51c/0xc20 [genwqe_card]
 [<000000000032513a>] do_vfs_ioctl+0x3b2/0x518
 [<0000000000325344>] SyS_ioctl+0xa4/0xb8
 [<00000000007b86c6>] system_call+0xd6/0x264
 [<000003ff9e8e520a>] 0x3ff9e8e520a
Last Breaking-Event-Address:
 [<0000000000156342>] dma_update_cpu_trans+0x9a/0xa8
---[ end trace 35996336235145c8 ]---
BUG: Bad page state in process jbd2/dasdb1-8  pfn:3215b
page:000003d100c856c0 count:-1 mapcount:0 mapping:          (null) index:0x0
flags: 0x3fffc0000000000()
page dumped because: nonzero _count

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: increase ohci watchdog delay to 275 msec

commit ed6d6f8f42d7302f6f9b6245f34927ec20d26c12 upstream.

Increase ohci watchout delay to 275 ms. Previous delay was 250 ms
with 20 ms of slack, after removing slack time some ohci controllers don't
respond in time. Logs from systems with controllers that have the
issue would show "HcDoneHead not written back; disabled"

Signed-off-by: Bryan Paluch <bryanpaluch@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: use default USB_RESUME_TIMEOUT when resuming ports.

commit 7d3b016a6f5a0fa610dfd02b05654c08fa4ae514 upstream.

USB2 host inititated resume, and system suspend bus resume
need to use the same USB_RESUME_TIMEOUT as elsewhere.

This resolves a device disconnect issue at system resume seen
on Intel Braswell and Apollolake, but is in no way limited to
those platforms.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7

commit ca006f785fbfd7a5c901900bd3fe2b26e946a1ee upstream.

This adds support to ftdi_sio for the Infineon TriBoard TC2X7
engineering board for first-generation Aurix SoCs with Tricore CPUs.
Mere addition of the device IDs does the job.

Signed-off-by: Stefan Tauner <stefan.tauner@technikum-wien.at>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: fix potential NULL-dereference at probe

commit 126d26f66d9890a69158812a6caa248c05359daa upstream.

Make sure we have at least one port before attempting to register a
console.

Currently, at least one driver binds to a "dummy" interface and requests
zero ports for it. Should such an interface also lack endpoints, we get
a NULL-deref during probe.

Fixes: e5b1e2062e05 ("USB: serial: make minor allocation dynamic")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: function: u_ether: don't starve tx request queue

commit 6c83f77278f17a7679001027e9231291c20f0d8a upstream.

If we don't guarantee that we will always get an
interrupt at least when we're queueing our very last
request, we could fall into situation where we queue
every request with 'no_interrupt' set. This will
cause the link to get stuck.

The behavior above has been triggered with g_ether
and dwc3.

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: txe: don't clean an unprocessed interrupt cause.

commit 43605e293eb13c07acb546c14f407a271837af17 upstream.

SEC registers are not accessible when the TXE device is in low power
state, hence the SEC interrupt cannot be processed if device is not
awake.

In some rare cases entrance to low power state (aliveness off) and input
ready bits can be signaled at the same time, resulting in communication
stall as input ready won't be signaled again after waking up. To resolve
this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the
interrupt is not processed.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Fix regression in ubifs_readdir()

commit a00052a296e54205cf238c75bd98d17d5d02a6db upstream.

Commit c83ed4c9dbb35 ("ubifs: Abort readdir upon error") broke
overlayfs support because the fix exposed an internal error
code to VFS.

Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Peter Rosin <peda@axentia.se>
Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Tested-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Fixes: c83ed4c9dbb35 ("ubifs: Abort readdir upon error")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Abort readdir upon error

commit c83ed4c9dbb358b9e7707486e167e940d48bfeed upstream.

If UBIFS is facing an error while walking a directory, it reports this
error and ubifs_readdir() returns the error code. But the VFS readdir
logic does not make the getdents system call fail in all cases. When the
readdir cursor indicates that more entries are present, the system call
will just return and the libc wrapper will try again since it also
knows that more entries are present.
This causes the libc wrapper to busy loop for ever when a directory is
corrupted on UBIFS.
A common approach do deal with corrupted directory entries is
skipping them by setting the cursor to the next entry. On UBIFS this
approach is not possible since we cannot compute the next directory
entry cursor position without reading the current entry. So all we can
do is setting the cursor to the "no more entries" position and make
getdents exit.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix races on root_log_ctx lists

commit 570dd45042a7c8a7aba1ee029c5dd0f5ccf41b9b upstream.

btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the
list because it knows all of the waiters are patiently waiting for the
commit to finish.

But, there's a small race where btrfs_sync_log can remove itself from
the list if it finds a log commit is already done.  Also, it uses
list_del_init() to remove itself from the list, but there's no way to
know if btrfs_remove_all_log_ctxs has already run, so we don't know for
sure if it is safe to call list_del_init().

This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and
just calls it with the proper locking.

This is part two of the corruption fixed by cbd60aa7cd1.  I should have
done this in the first place, but convinced myself the optimizations were
safe.  A 12 hour run of dbench 2048 will eventually trigger a list debug
WARN_ON for the list_del_init() in btrfs_sync_log().

Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct

commit 4afb604e2d14d429ac9e1fd84b952602853b2df5 upstream.

Prevents leaking pointers between processes

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID: binder: Add strong ref checks

commit 0a3ffab93fe52530602fe47cd74802cffdb19c05 upstream.

Prevent using a binder_ref with only weak references where a strong
reference is required.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix headset mic detection problem for two Dell laptops

commit 6aecd8715802d23dc6a0859b50c62d2b0a99de3a upstream.

They uses the codec ALC255, and have the different pin cfg definition
from the ones in the existing pin quirk table. Now adding them into
the table to fix the problem.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table

commit f771d5bb71d4df9573d12386400540516672208b upstream.

We have a new Dell laptop model which uses ALC295, the pin definition
is different from the existing ones in the pin quirk table, to fix the
headset mic detection and mic mute led's problem, we need to add the
new pin defintion into the pin quirk table.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - allow 40 bit DMA mask for NVidia devices

commit 3ab7511eafdd5c4f40d2832f09554478dfbea170 upstream.

Commit 49d9e77e72cf ("ALSA: hda - Fix system panic when DMA > 40 bits
for Nvidia audio controllers") simply disabled any DMA exceeding 32
bits for NVidia devices, even though they are capable of performing
DMA up to 40 bits. On some architectures (such as arm64), system memory
is not guaranteed to be 32-bit addressable by PCI devices, and so this
change prevents NVidia devices from working on platforms such as AMD
Seattle.

Since the original commit already mentioned that up to 40 bits of DMA
is supported, and given that the code has been updated in the meantime
to support a 40 bit DMA mask on other devices, revert commit 49d9e77e72cf
and explicitly set the DMA mask to 40 bits for NVidia devices.

Fixes: 49d9e77e72cf ('ALSA: hda - Fix system panic when DMA > 40 bits...')
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Raise AZX_DCAPS_RIRB_DELAY handling into top drivers

commit 7d9a180895ee8c301df7f9447429009795c56c21 upstream.

AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is
just to set a flag in bus.  So it's better to be set in the toplevel
driver, either hda_intel.c or hda_tegra.c, instead of the common
hda_controller.c.  This also allows us to strip this flag from dcaps,
so save one more bit there.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps

commit ef85f299c74e6c5dd98ec0230183be33f4c2813d upstream.

AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND,
which is Creative's XFi specific.  So, we can replace it and reduce
one more bit free for DCAPS.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add quirk for Syntek STK1160

commit bdc3478f90cd4d2928197f36629d5cf93b64dbe9 upstream.

The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves
the issue reported on the mailing list
(http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes
bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071).

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: Fix short sprintf buffer in /proc/keys show function

commit 03dab869b7b239c4e013ec82aea22e181e441cfc upstream.

This fixes CVE-2016-7042.

Fix a short sprintf buffer in proc_keys_show().  If the gcc stack protector
is turned on, this can cause a panic due to stack corruption.

The problem is that xbuf[] is not big enough to hold a 64-bit timeout
rendered as weeks:

(gdb) p 0xffffffffffffffffULL/(60*60*24*7)
$2 = 30500568904943

That's 14 chars plus NUL, not 11 chars plus NUL.

Expand the buffer to 16 chars.

I think the unpatched code apparently works if the stack-protector is not
enabled because on a 32-bit machine the buffer won't be overflowed and on a
64-bit machine there's a 64-bit aligned pointer at one side and an int that
isn't checked again on the other side.

The panic incurred looks something like:

Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe
CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f
 ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6
 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679
Call Trace:
 [<ffffffff813d941f>] dump_stack+0x63/0x84
 [<ffffffff811b2cb6>] panic+0xde/0x22a
 [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0
 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30
 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0
 [<ffffffff81350410>] ? key_validate+0x50/0x50
 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20
 [<ffffffff8126b31c>] seq_read+0x2cc/0x390
 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70
 [<ffffffff81244fc7>] __vfs_read+0x37/0x150
 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0
 [<ffffffff81246156>] vfs_read+0x96/0x130
 [<ffffffff81247635>] SyS_read+0x55/0xc0
 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4

Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: memcontrol: do not recurse in direct reclaim

commit 89a2848381b5fcd9c4d9c0cd97680e3b28730e31 upstream.

On 4.0, we saw a stack corruption from a page fault entering direct
memory cgroup reclaim, calling into btrfs_releasepage(), which then
tried to allocate an extent and recursed back into a kmem charge ad
nauseam:

  [...]
  btrfs_releasepage+0x2c/0x30
  try_to_release_page+0x32/0x50
  shrink_page_list+0x6da/0x7a0
  shrink_inactive_list+0x1e5/0x510
  shrink_lruvec+0x605/0x7f0
  shrink_zone+0xee/0x320
  do_try_to_free_pages+0x174/0x440
  try_to_free_mem_cgroup_pages+0xa7/0x130
  try_charge+0x17b/0x830
  memcg_charge_kmem+0x40/0x80
  new_slab+0x2d9/0x5a0
  __slab_alloc+0x2fd/0x44f
  kmem_cache_alloc+0x193/0x1e0
  alloc_extent_state+0x21/0xc0
  __clear_extent_bit+0x2b5/0x400
  try_release_extent_mapping+0x1a3/0x220
  __btrfs_releasepage+0x31/0x70
  btrfs_releasepage+0x2c/0x30
  try_to_release_page+0x32/0x50
  shrink_page_list+0x6da/0x7a0
  shrink_inactive_list+0x1e5/0x510
  shrink_lruvec+0x605/0x7f0
  shrink_zone+0xee/0x320
  do_try_to_free_pages+0x174/0x440
  try_to_free_mem_cgroup_pages+0xa7/0x130
  try_charge+0x17b/0x830
  mem_cgroup_try_charge+0x65/0x1c0
  handle_mm_fault+0x117f/0x1510
  __do_page_fault+0x177/0x420
  do_page_fault+0xc/0x10
  page_fault+0x22/0x30

On later kernels, kmem charging is opt-in rather than opt-out, and that
particular kmem allocation in btrfs_releasepage() is no longer being
charged and won't recurse and overrun the stack anymore.

But it's not impossible for an accounted allocation to happen from the
memcg direct reclaim context, and we needed to reproduce this crash many
times before we even got a useful stack trace out of it.

Like other direct reclaimers, mark tasks in memcg reclaim PF_MEMALLOC to
avoid recursing into any other form of direct reclaim.  Then let
recursive charges from PF_MEMALLOC contexts bypass the cgroup limit.

Link: http://lkml.kernel.org/r/20161025141050.GA13019@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/list_lru.c: avoid error-path NULL pointer deref

commit 1bc11d70b5db7c6bb1414b283d7f09b1fe1ac0d0 upstream.

As described in https://bugzilla.kernel.org/show_bug.cgi?id=177821:

After some analysis it seems to be that the problem is in alloc_super().
In case list_lru_init_memcg() fails it goes into destroy_super(), which
calls list_lru_destroy().

And in list_lru_init() we see that in case memcg_init_list_lru() fails,
lru->node is freed, but not set NULL, which then leads list_lru_destroy()
to believe it is initialized and call memcg_destroy_list_lru().
memcg_destroy_list_lru() in turn can access lru->node[i].memcg_lrus,
which is NULL.

[akpm@linux-foundation.org: add comment]
Signed-off-by: Alexander Polakov <apolyakov@beget.ru>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libxfs: clean up _calc_dquots_per_chunk

commit 58d789678546d46d7bbd809dd7dab417c0f23655 upstream.

The function xfs_calc_dquots_per_chunk takes a parameter in units
of basic blocks.  The kernel seems to get the units wrong, but
userspace got 'fixed' by commenting out the unnecessary conversion.
Fix both.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

h8300: fix syscall restarting

commit 21753583056d48a5fad964d6f272e28168426845 upstream.

Back in commit f56141e3e2d9 ("all arches, signal: move restart_block to
struct task_struct"), all architectures and core code were changed to
use task_struct::restart_block.  However, when h8300 support was
subsequently restored in v4.2, it was not updated to account for this,
and maintains thread_info::restart_block, which is not kept in sync.

This patch drops the redundant restart_block from thread_info, and moves
h8300 to the common one in task_struct, ensuring that syscall restarting
always works as expected.

Fixes: f56141e3e2d9 ("all arches, signal: move restart_block to struct task_struct")
Link: http://lkml.kernel.org/r/1476714934-11635-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: Clear port->pdt when tearing down the i2c adapter

commit 36e3fa6a38e135e9478a2f75dec9bf6ff1e6480e upstream.

The i2c adapter is only relevant for some peer device types, so
let's clear the pdt if it's still the same as the old_pdt when we
tear down the i2c adapter.

I don't really like this design pattern of updating port->whatever
before doing the accompanying changes and passing around old_whatever
to figure stuff out. Would make much more sense to me to the pass the
new value around and only update the port->whatever when things are
consistent. But let's try to work with what we have right now.

Quoting a follow-up from Ville:

"And naturally I forgot to amend the commit message w.r.t. this guy
[the change in drm_dp_destroy_port].  We don't really need to do this
here, but I figured I'd try to be a bit more consistent by having it,
just to avoid accidental mistakes if/when someone changes this stuff
again later."

v2: Clear port->pdt in the caller, if needed (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: fix NULL pointer dereference under race condition

commit 147b36d5b70c083cc76770c47d60b347e8eaf231 upstream.

Race condition between registering an I2C device driver and
deregistering an I2C adapter device which is assumed to manage that
I2C device may lead to a NULL pointer dereference due to the
uninitialized list head of driver clients.

The root cause of the issue is that the I2C bus may know about the
registered device driver and thus it is matched by bus_for_each_drv(),
but the list of clients is not initialized and commonly it is NULL,
because I2C device drivers define struct i2c_driver as static and
clients field is expected to be initialized by I2C core:

  i2c_register_driver()             i2c_del_adapter()
    driver_register()                 ...
      bus_add_driver()                ...
        ...                           bus_for_each_drv(..., __process_removed_adapter)
      ...                               i2c_do_del_adapter()
    ...                                   list_for_each_entry_safe(..., &driver->clients, ...)
    INIT_LIST_HEAD(&driver->clients);

To solve the problem it is sufficient to do clients list head
initialization before calling driver_register().

The problem was found while using an I2C device driver with a sluggish
registration routine on a bus provided by a physically detachable I2C
master controller, but practically the oops may be reproduced under
the race between arbitraty I2C device driver registration and managing
I2C bus device removal e.g. by unbinding the latter over sysfs:

% echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind
  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  Internal error: Oops: 17 [#1] SMP ARM
  CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  task: e5ada400 task.stack: e4936000
  PC is at i2c_do_del_adapter+0x20/0xcc
  LR is at __process_removed_adapter+0x14/0x1c
  Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: 35bd004a  DAC: 00000051
  Process sh (pid: 533, stack limit = 0xe4936210)
  Stack: (0xe4937d28 to 0xe4938000)
  Backtrace:
  [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c)
  [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0)
  [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284)
  [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx])
  [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44)
  [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c)
  [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34)
  [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104)
  [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34)
  [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54)
  [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214)
  [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120)
  [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170)
  [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8)
  [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c)

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: xgene: Avoid dma_buffer overrun

commit 603616017c35f4d0fbdbcace72adf9bf949c4a65 upstream.

SMBus block command uses the first byte of buffer for the data length.
The dma_buffer should be increased by 1 to avoid the overrun issue.

Reported-by: Phil Endecott <phil_gjouf_endecott@chezphil.org>
Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.30

Revert "fix minor infoleak in get_user_ex()"

This reverts commit 9d25c78ec01c402dc56272693c44ef9d72ecdd2e which is
1c109fabbd51863475cd12ac206bdd249aee35af upstream

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86/mm: Expand the exception table logic to allow new handling options"

This reverts commit fcf5e5198b447969ed2a56ec335dae3c695a6b46 which is
548acf19234dbda5a52d5a8e7e205af46e9da840 upstream.

Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.29

ARM: pxa: pxa_cplds: fix interrupt handling

commit 9ba63e3cc849cdaf3b675c47cc51fe35419e5117 upstream.

Since its initial commit, the driver is buggy for multiple interrupts
handling. The translation from the former lubbock.c file was not
complete, and might stall all interrupt handling when multiple
interrupts occur.

This is especially true when inside the interrupt handler and if a new
interrupt comes and is not handled, leaving the output line still held,
and not creating a transition as the GPIO block behind would expect to
trigger another cplds_irq_handler() call.

For the record, the hardware is working as follows.

The interrupt mechanism relies on :
 - one status register
 - one mask register

Let's suppose the input irq lines are called :
 - i_sa1111
 - i_lan91x
 - i_mmc_cd
Let's suppose the status register for each irq line is called :
 - status_sa1111
 - status_lan91x
 - status_mmc_cd
Let's suppose the interrupt mask for each irq line is called :
 - irqen_sa1111
 - irqen_lan91x
 - irqen_mmc_cd
Let's suppose the output irq line, connected to GPIO0 is called :
 - o_gpio0

The behavior is as follows :
 - o_gpio0 = not((status_sa1111 & irqen_sa1111) |
 (status_lan91x & irqen_lan91x) |
 (status_mmc_cd & irqen_mmc_cd))
   => this is a N-to-1 NOR gate and multiple AND gates
 - irqen_* is exactly as programmed by a write to the FPGA
 - status_* behavior is governed by a bi-stable D flip-flop
   => on next FPGA clock :
     - if i_xxx is high, status_xxx becomes 1
     - if i_xxx is low, status_xxx remains as it is
     - if software sets status_xxx to 0, the D flip-flop is reset
       => status_xxx becomes 0
       => on next FPGA clock cycle, if i_xxx is high, status_xxx becomes
  1 again

Fixes: fc9e38c0f4d3 ("ARM: pxa: lubbock: use new pxa_cplds driver")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/nvram: Fix an incorrect partition merge

commit 11b7e154b132232535befe51c55db048069c8461 upstream.

When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.

Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .

Fixes: fa2b4e54d41f ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mpt3sas: Don't spam logs if logging level is 0

commit 0d667f72b2a20bbac72bec0ab11467fc70bb0f1f upstream.

In _scsih_io_done() we test if the ioc->logging_level does _not_ have
the MPT_DEBUG_REPLY bit set and if it hasn't we print the debug
messages. This unfortunately is the wrong way around.

Note, the actual bug is older than af0094115 but this commit removed the
CONFIG_SCSI_MPT3SAS_LOGGING Kconfig option which hid the bug.

Fixes: af0094115 'mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from Kconfig'
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf symbols: Fixup symbol sizes before picking best ones

commit 432746f8e0b6a82ba832b771afe31abd51af6752 upstream.

When we call symbol__fixup_duplicate() we use algorithms to pick the
"best" symbols for cases where there are various functions/aliases to an
address, and those check zero size symbols, which, before calling
symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file.

So first fixup the end, then fixup the duplicates.

Found while trying to figure out why 'perf test vmlinux' failed, see the
output of 'perf test -v vmlinux' to see cases where the symbols picked
as best for vmlinux don't match the ones picked for kallsyms.

Cc: Anton Blanchard <anton@samba.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 694bf407b061 ("perf symbols: Add some heuristics for choosing the best duplicate symbol")
Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too

commit c97b40e4d15f13a36cd037d598e45cbe9e1e5757 upstream.

We can allow aliases to be kept, but we were checking this just when
loading vmlinux files, be consistent, do it for any symbol table loading
code that calls symbol__fixup_duplicate() by making this function check
.allow_aliases instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 680d926a8cb0 ("perf symbols: Allow symbol alias when loading map for symbol name")
Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf hists browser: Fix event group display

commit d9ea48bc4e7cc297ca1073fa3f90ed80d964b7b4 upstream.

Milian reported that the event group on TUI shows duplicated overhead.
This was due to a bug on calculating hpp->buf position.  The
hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but
it's already called from the hpp__call_print_fn macro in __hpp__fmt().
The end result is that the print function returns number of bytes it
printed but the buffer advanced twice of the length.

This is generally not a problem since it doesn't need to access the
buffer again.  But with event group, overhead needs to be printed
multiple times and hist_entry__snprintf_alignment() tries to fill the
space with buffer after it printed.  So it (brokenly) showed the last
overhead again.

The bug was there from the beginning, but I think it's only revealed
when the alignment function was added.

Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 89fee7094323 ("perf hists: Do column alignment on the format iterator")
Link: http://lkml.kernel.org/r/20160912061958.16656-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: divider: Fix clk_divider_round_rate() to use clk_readl()

commit 2cf9a57811bddb6fa6b0f8d7376da164d5534813 upstream.

clk-divider uses clk_readl()/clk_writel() everywhere, except in
clk_divider_round_rate(), where plain readl() is used. Change this to
clk_readl(), as it makes a difference on powerpc.

Fixes: e6d5e7d90be92cee ("clk-divider: Fix READ_ONLY when divider > 1")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qoriq: fix a register offset error

commit 8964193f6bfda5c4cf14eedb7e94892c1f1c34f0 upstream.

The offset of Core Cluster clock control/status register
on cluster group V3 version is different from others, and
should be plus 0x70000.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Reviewed-by: Scott Wood <oss@buserror.net>
Fixes: 9e19ca2f627e ("clk: qoriq: Add ls2080a support.")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/con3270: fix insufficient space padding

commit 6cd997db911f28f2510b771691270c52b63ed2e6 upstream.

con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.

For lines that were _just_ short enough that the RA order still fit in
the line buffer, the line was instead padded with an insufficient
amount of spaces. This was caused by examining the size of the
allocated line buffer rather than the length of the string to be
displayed.

For con3270_cline_end(), we just compare against the line length. For
con3270_update_string() however that isn't available anymore, so we
check whether the Repeat to Address order is present.

Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git)
Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/con3270: fix use of uninitialised data

commit c14f2aac7aa147861793eed9f41f91dd530f0be1 upstream.

con3270 contains an optimisation that reduces the amount of data to be
transmitted to the 3270 terminal by putting a Repeat to Address (RA)
order into the data stream. The RA order itself takes up space, so
con3270 only uses it if there's enough space left in the line
buffer. Otherwise it just pads out the line manually.

For lines too long to include the RA order, one byte was left
uninitialised. This was caused by an off-by-one bug in the loop that
pads out the line. Since the buffer is allocated from a common pool,
the single byte left uninitialised contained some previous buffer
content. Usually this was just a space or some character (which can
result in clutter but is otherwise harmless). Sometimes, however, it
was a Repeat to Address order, messing up the entire screen layout and
causing the display to send the entire buffer content on every
keystroke.

Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git)
Reported-by: Liu Jing <liujbjl@linux.vnet.ibm.com>
Tested-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Tested-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>