USB: hub: fix SS max number of ports

commit 93491ced3c87c94b12220dbac0527e1356702179 upstream.

Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.

This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).

Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: proximity: as3935: recalibrate RCO after resume

commit 6272c0de13abf1480f701d38288f28a11b4301c4 upstream.

According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.

Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()

commit 784047eb2d3405a35087af70cba46170c5576b25 upstream.

The "len" could be as low as -14 so we should check for negatives.

Fixes: 9a7fe54ddc3a ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode

commit 8b8a84c54aff4256d592dc18346c65ecf6811b45 upstream.

Commit 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
bit the wrong way. The comments in the code are correct, but the inverted
use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be
enabled instead of disabled unlike what the comments say.

Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can
be only pinged few times before it stops responding.

Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()

commit 861ce4a3244c21b0af64f880d5bfe5e6e2fb9e4a upstream.

'__vmalloc_start_set' currently only gets set in initmem_init() when
!CONFIG_NEED_MULTIPLE_NODES. This breaks detection of vmalloc address
with virt_addr_valid() with CONFIG_NEED_MULTIPLE_NODES=y, causing
a kernel crash:

  [mm/usercopy] 517e1fbeb6: kernel BUG at arch/x86/mm/physaddr.c:78!

Set '__vmalloc_start_set' appropriately for that case as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dc16ecf7fd1f ("x86-32: use specific __vmalloc_start_set flag in __virt_addr_valid")
Link: http://lkml.kernel.org/r/1494278596-30373-1-git-send-email-labbott@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'

commit be40597a1bc173bf9dadccdf5388b956f620ae8f upstream.

UARTn_FRAME_PARITY_ODD is 0x0300
UARTn_FRAME_PARITY_EVEN is 0x0200
So if the UART is configured for EVEN parity, it would be reported as ODD.
Fix it by correctly testing if the 2 bits are set.

Fixes: 3afbd89c9639 ("serial/efm32: add new driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix IBSS presp allocation size

commit f1f3e9e2a50a70de908f9dfe0d870e9cdc67e042 upstream.

When VHT IBSS support was added, the size of the extra elements
wasn't considered in ieee80211_ibss_build_presp(), which makes
it possible that it would overrun the allocated buffer. Fix it
by allocating the necessary space.

Fixes: abcff6ef01f9 ("mac80211: add VHT support for IBSS")
Reported-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix CSA in IBSS mode

commit f181d6a3bcc35633facf5f3925699021c13492c5 upstream.

Add the missing IBSS capability flag during capability init as it needs
to be inserted into the generated beacon in order for CSA to work.

Fixes: cd7760e62c2ac ("mac80211: add support for CSA in IBSS mode")
Signed-off-by: Piotr Gawlowicz <gawlowicz@tkn.tu-berlin.de>
Signed-off-by: Mikołaj Chwalisz <chwalisz@tkn.tu-berlin.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211/wpa: use constant time memory comparison for MACs

commit 98c67d187db7808b1f3c95f2110dd4392d034182 upstream.

Otherwise, we enable all sorts of forgeries via timing attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't look at the PM bit of BAR frames

commit 769dc04db3ed8484798aceb015b94deacc2ba557 upstream.

When a peer sends a BAR frame with PM bit clear, we should
not modify its PM state as madated by the spec in
802.11-20012 10.2.1.2.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vb2: Fix an off by one error in 'vb2_plane_vaddr'

commit 5ebb6dd36c9f5fb37b1077b393c254d70a14cb46 upstream.

We should ensure that 'plane_no' is '< vb->num_planes' as done in
'vb2_plane_cookie' just a few lines below.

Fixes: e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: conservative: Allow down_threshold to take values from 1 to 10

commit b8e11f7d2791bd9320be1c6e772a60b2aa093e45 upstream.

Commit 27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency
decrease checking) removed the 10 point substraction when comparing the
load against down_threshold but did not remove the related limit for the
down_threshold value.  As a result, down_threshold lower than 11 is not
allowed even though values from 1 to 10 do work correctly too. The
comment ("cannot be lower than 11 otherwise freq will not fall") also
does not apply after removing the substraction.

For this reason, allow down_threshold to take any value from 1 to 99
and fix the related comment.

Fixes: 27ed3cd2ebf4 (cpufreq: conservative: Fix the logic in frequency decrease checking)
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: gs_usb: fix memory leak in gs_cmd_reset()

commit 5cda3ee5138e91ac369ed9d0b55eab0dab077686 upstream.

This patch adds the missing kfree() in gs_cmd_reset() to free the
memory that is not used anymore after usb_control_msg().

Cc: Maximilian Schneider <max@schneidersoft.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

configfs: Fix race between create_link and configfs_rmdir

commit ba80aa909c99802c428682c352b0ee0baac0acd3 upstream.

This patch closes a long standing race in configfs between
the creation of a new symlink in create_link(), while the
symlink target's config_item is being concurrently removed
via configfs_rmdir().

This can happen because the symlink target's reference
is obtained by config_item_get() in create_link() before
the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep()
during configfs_rmdir() shutdown is actually checked..

This originally manifested itself on ppc64 on v4.8.y under
heavy load using ibmvscsi target ports with Novalink API:

[ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added
[ 7879.893760] ------------[ cut here ]------------
[ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs]
[ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G           O 4.8.17-customv2.22 #12
[ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000
[ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870
[ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700   Tainted: G O     (4.8.17-customv2.22)
[ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28222242  XER: 00000000
[ 7879.893820] CFAR: d000000002c664bc SOFTE: 1
                GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820
                GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000
                GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80
                GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40
                GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940
                GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000
                GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490
                GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940
[ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs]
[ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs]
[ 7879.893842] Call Trace:
[ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs]
[ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460
[ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490
[ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170
[ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390
[ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec
[ 7879.893856] Instruction dump:
[ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000
[ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000
[ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]---

To close this race, go ahead and obtain the symlink's target
config_item reference only after the existing CONFIGFS_USET_DROPPING
check succeeds.

This way, if configfs_rmdir() wins create_link() will return -ENONET,
and if create_link() wins configfs_rmdir() will return -EBUSY.

Reported-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.73

sparc64: make string buffers large enough

commit b5c3206190f1fddd100b3060eb15f0d775ffeab8 upstream.

My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit)
then some of the strings will overflow.  I don't know if that's possible
but it seems simple enough to make the buffers slightly larger.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kvm: do not rely on the ILC on kvm host protection fauls

commit c0e7bb38c07cbd8269549ee0a0566021a3c729de upstream.

For most cases a protection exception in the host (e.g. copy
on write or dirty tracking) on the sie instruction will indicate
an instruction length of 4. Turns out that there are some corner
cases (e.g. runtime instrumentation) where this is not necessarily
true and the ILC is unpredictable.

Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for
all possible ILCs.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: don't use linux IRQ #0

commit e5c86679d5e864947a52fb31e45a425dea3e7fa9 upstream.

Linux IRQ #0 is reserved for error reporting and may not be used.
Increase NR_IRQS for one additional slot and increase
irq_domain_add_legacy parameter first_irq value to 1, so that linux
IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains.
Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa
PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform
data definitions.

This fixes inability to use hardware IRQ #0 in configurations that don't
use device tree and allows for non-identity mapping between linux IRQ #
and hardware IRQ #.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: ignore requests when the connection state is not CONNECTED

[ Upstream commit 4c887aa65d38633885010277f3482400681be719 ]

In tipc_conn_sendmsg(), we first queue the request to the outqueue
followed by the connection state check. If the connection is not
connected, we should not queue this message.

In this commit, we reject the messages if the connection state is
not CF_CONNECTED.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: add a schedule point in proc_pid_readdir()

[ Upstream commit 3ba4bceef23206349d4130ddf140819b365de7c8 ]

We have seen proc_pid_readdir() invocations holding cpu for more than 50
ms.  Add a cond_resched() to be gentle with other tasks.

[akpm@linux-foundation.org: coding style fix]
Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

romfs: use different way to generate fsid for BLOCK or MTD

[ Upstream commit f598f82e204ec0b17797caaf1b0311c52d43fb9a ]

Commit 8a59f5d25265 ("fs/romfs: return f_fsid for statfs(2)") generates
a 64bit id from sb->s_bdev->bd_dev.  This is only correct when romfs is
defined with CONFIG_ROMFS_ON_BLOCK.  If romfs is only defined with
CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev
will triger an oops.

Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y,
both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined.
Therefore when calling huge_encode_dev() to generate a 64bit id, I use
the follow order to choose parameter,

- CONFIG_ROMFS_ON_BLOCK defined
  use sb->s_bdev->bd_dev
- CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined
  use sb->s_dev when,
- both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined
  leave id as 0

When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev
is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index,
otherwise sb->s_dev is 0.

This is a try-best effort to generate a uniq file system ID, if all the
above conditions are not meet, f_fsid of this romfs instance will be 0.
Generally only one romfs can be built on single MTD block device, this
method is enough to identify multiple romfs instances in a computer.

Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.de
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Nong Li <nongli1031@gmail.com>
Tested-by: Nong Li <nongli1031@gmail.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: sctp_addr_id2transport should verify the addr before looking up assoc

[ Upstream commit 6f29a130613191d3c6335169febe002cba00edf5 ]

sctp_addr_id2transport is a function for sockopt to look up assoc by
address. As the address is from userspace, it can be a v4-mapped v6
address. But in sctp protocol stack, it always handles a v4-mapped
v6 address as a v4 address. So it's necessary to convert it to a v4
address before looking up assoc by address.

This patch is to fix it by calling sctp_verify_addr in which it can do
this conversion before calling sctp_endpoint_lookup_assoc, just like
what sctp_sendmsg and __sctp_connect do for the address from users.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: avoid start_xmit to schedule napi when napi is disabled

[ Upstream commit de9bf29dd6e4a8a874cb92f8901aed50a9d0b1d3 ]

Stop the tx when the napi is disabled to prevent napi_schedule() is
called.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: fix rtl8152_post_reset function

[ Upstream commit 2c561b2b728ca4013e76d6439bde2c137503745e ]

The rtl8152_post_reset() should sumbit rx urb and interrupt transfer,
otherwise the rx wouldn't work and the linking change couldn't be
detected.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: re-schedule napi for tx

[ Upstream commit 248b213ad908b88db15941202ef7cb7eb137c1a0 ]

Re-schedule napi after napi_complete() for tx, if it is necessay.

In r8152_poll(), if the tx is completed after tx_bottom() and before
napi_complete(), the scheduling of napi would be lost. Then, no
one handles the next tx until the next napi_schedule() is called.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"

[ Upstream commit 406dab8450ec76eca88a1af2fc15d18a2b36ca49 ]

Lock sequence IDs are bumped in decode_lock by calling
nfs_increment_seqid(). nfs_increment_sequid() does not use the
seqid_mutating_err() function fixed in commit 059aa7348241 ("Don't
increment lock sequence ID after NFS4ERR_MOVED").

Fixes: 059aa7348241 ("Don't increment lock sequence ID after ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ravb: unmap descriptors when freeing rings

[ Upstream commit a47b70ea86bdeb3091341f5ae3ef580f1a1ad822 ]

"swiotlb buffer is full" errors occur after repeated initialisation of a
device - f.e. suspend/resume or ip link set up/down. This is because memory
mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit()
is not released.  Resolve this problem by unmapping descriptors when
freeing rings.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fixed system hanged if disable P2A

[ Upstream commit 6c971c09f38704513c426ba6515f22fb3d6c87d5 ]

The original ast driver will access some BMC configuration through P2A bridge
that can be disabled since AST2300 and after.
It will cause system hanged if P2A bridge is disabled.
Here is the update to fix it.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: Don't enabling polling twice on runtime resume

[ Upstream commit cae9ff036eea577856d5b12860b4c79c5e71db4a ]

As it turns out, on cards that actually have CRTCs on them we're already
calling drm_kms_helper_poll_enable(drm_dev) from
nouveau_display_resume() before we call it in
nouveau_pmops_runtime_resume(). This leads us to accidentally trying to
enable polling twice, which results in a potential deadlock between the
RPM locks and drm_dev->mode_config.mutex if we end up trying to enable
polling the second time while output_poll_execute is running and holding
the mode_config lock. As such, make sure we only enable polling in
nouveau_pmops_runtime_resume() if we need to.

This fixes hangs observed on the ThinkPad W541

Signed-off-by: Lyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc, parport_gsc: Fixes for printk continuation lines

[ Upstream commit 83b5d1e3d3013dbf90645a5d07179d018c8243fa ]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: adaptec: starfire: add checks for dma mapping errors

[ Upstream commit d1156b489fa734d1af763d6a07b1637c01bb0aed ]

init_ring(), refill_rx_ring() and start_tx() don't check
if mapping dma memory succeed.
The patch adds the checks and failure handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES

[ Upstream commit e82d02580af45663fad6d3596e4344c606e81e10 ]

This should be a typo.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page

[ Upstream commit 4af0e5bb95ee3ba5ea4bd7dbb94e1648a5279cc9 ]

In spite of switching to paged allocation of Rx buffers, the driver still
called dma_unmap_single() in the Rx queues tear-down path.

The DMA region unmapping code in free_skb_rx_queue() basically predates
the introduction of paged allocation to the driver. While being refactored,
it apparently hasn't reflected the change in the DMA API usage by its
counterpart gfar_new_page().

As a result, setting an interface to the DOWN state now yields the following:

  # ip link set eth2 down
  fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40]
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28
  CPU: 1 PID: 189 Comm: ip Tainted: G           O    4.9.5 #1
  task: dee73400 task.stack: dede2000
  NIP: c02101e8 LR: c02101e8 CTR: c0260d74
  REGS: dede3bb0 TRAP: 0700   Tainted: G           O     (4.9.5)
  MSR: 00021000 <CE,ME>  CR: 28002222  XER: 00000000

  GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000
  GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000
  GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000
  GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540
  NIP [c02101e8] check_unmap+0x8e0/0xa28
  LR [c02101e8] check_unmap+0x8e0/0xa28
  Call Trace:
  [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable)
  [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c
  [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404
  [dede3d80] [c02e39b4] gfar_close+0x24/0xc8
  [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8
  [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c
  [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174
  [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60
  [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824
  [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298
  [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854
  [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74
  [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c
  --- interrupt: c01 at 0xff45da0
      LR = 0xff45cd0
  Instruction dump:
  811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052
  386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4
  ---[ end trace 695ae6d7ac1d0c47 ]---
  Mapped at:
   [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248
   [<c02e3ef0>] startup_gfar+0x368/0x570
   [<c036aeb4>] __dev_open+0xdc/0x150
   [<c036b1b8>] __dev_change_flags+0xa0/0x174
   [<c036b2ac>] dev_change_flags+0x20/0x60

Even though the issue was discovered in 4.9 kernel, the code in question
is identical in the current net and net-next trees.

Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Avoid command timeouts during VF driver device shutdown

[ Upstream commit d585df1c5ccf995fcee910705ad7a9cdd11d4152 ]

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

The result is that the VF driver on the VM will experience a command
timeout during the shutdown process when the Hypervisor does not deliver
a command-completion event to the VM.

To avoid FW command timeouts on the VM when the driver's shutdown method
is invoked, we detect the absence of the VF's comm channel at the very
start of the shutdown process. If the comm-channel has already been
disabled, we cause all FW commands during the device shutdown process to
immediately return success (and thus avoid all command timeouts).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers

[ Upstream commit 96692b097ba76d0c637ae8af47b29c73da33c9d0 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: prevent userspace from deleting client object

[ Upstream commit c966b6279f610a24ac1d42dcbe30e10fa61220b2 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: fix flow labels when the traffic class is non-0

[ Upstream commit 90427ef5d2a4b9a24079889bf16afdcdaebc4240 ]

ip6_make_flowlabel() determines the flow label for IPv6 packets. It's
supposed to be passed a flow label, which it returns as is if non-0 and
in some other cases, otherwise it calculates a new value.

The problem is callers often pass a flowi6.flowlabel, which may also
contain traffic class bits. If the traffic class is non-0
ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and
returns the whole thing. Thus it can return a 'flow label' longer than
20b and the low 20b of that is typically 0 resulting in packets with 0
label. Moreover, different packets of a flow may be labeled differently.
For a TCP flow with ECN non-payload and payload packets get different
labels as exemplified by this pair of consecutive packets:

(pure ACK)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49
    Payload Length: 32
    Next Header: TCP (6)

(payload)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000
    Payload Length: 688
    Next Header: TCP (6)

This patch allows ip6_make_flowlabel() to be passed more than just a
flow label and has it extract the part it really wants. This was simpler
than modifying the callers. With this patch packets like the above become

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 32
    Next Header: TCP (6)

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 688
    Next Header: TCP (6)

Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FS-Cache: Initialise stores_lock in netfs cookie

[ Upstream commit 62deb8187d116581c88c69a2dd9b5c16588545d4 ]

Initialise the stores_lock in fscache netfs cookies.  Technically, it
shouldn't be necessary, since the netfs cookie is an index and stores no
data, but initialising it anyway adds insignificant overhead.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Clear outstanding writes when disabling a cookie

[ Upstream commit 6bdded59c8933940ac7e5b416448276ac89d1144 ]

fscache_disable_cookie() needs to clear the outstanding writes on the
cookie it's disabling because they cannot be completed after.

Without this, fscache_nfs_open_file() gets stuck because it disables the
cookie when the file is opened for writing but can't uncache the pages till
afterwards - otherwise there's a race between the open routine and anyone
who already has it open R/O and is still reading from it.

Looking in /proc/pid/stack of the offending process shows:

[<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache]
[<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache]
[<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs]
[<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4]
[<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7
[<ffffffff811743ac>] vfs_open+0x5c/0x65
[<ffffffff81184185>] path_openat+0x785/0x8fb
[<ffffffff81184343>] do_filp_open+0x48/0x9e
[<ffffffff81174710>] do_sys_open+0x13b/0x1cb
[<ffffffff811747b9>] SyS_open+0x19/0x1b
[<ffffffff81001c44>] do_syscall_64+0x80/0x17a
[<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a
[<ffffffffffffffff>] 0xffffffffffffffff

Reported-by: Jianhong Yin <jiyin@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Fix dead object requeue

[ Upstream commit e26bfebdfc0d212d366de9990a096665d5c0209a ]

Under some circumstances, an fscache object can become queued such that it
fscache_object_work_func() can be called once the object is in the
OBJECT_DEAD state.  This results in the kernel oopsing when it tries to
invoke the handler for the state (which is hard coded to 0x2).

The way this comes about is something like the following:

 (1) The object dispatcher is processing a work state for an object.  This
     is done in workqueue context.

 (2) An out-of-band event comes in that isn't masked, causing the object to
     be queued, say EV_KILL.

 (3) The object dispatcher finishes processing the current work state on
     that object and then sees there's another event to process, so,
     without returning to the workqueue core, it processes that event too.
     It then follows the chain of events that initiates until we reach
     OBJECT_DEAD without going through a wait state (such as
     WAIT_FOR_CLEARANCE).

     At this point, object->events may be 0, object->event_mask will be 0
     and oob_event_mask will be 0.

 (4) The object dispatcher returns to the workqueue processor, and in due
     course, this sees that the object's work item is still queued and
     invokes it again.

 (5) The current state is a work state (OBJECT_DEAD), so the dispatcher
     jumps to it - resulting in an OOPS.

When I'm seeing this, the work state in (1) appears to have been either
LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is
fscache_osm_lookup_oob).

The window for (2) is very small:

 (A) object->event_mask is cleared whilst the event dispatch process is
     underway - though there's no memory barrier to force this to the top
     of the function.

     The window, therefore is from the time the object was selected by the
     workqueue processor and made requeueable to the time the mask was
     cleared.

 (B) fscache_raise_event() will only queue the object if it manages to set
     the event bit and the corresponding event_mask bit was set.

     The enqueuement is then deferred slightly whilst we get a ref on the
     object and get the per-CPU variable for workqueue congestion.  This
     slight deferral slightly increases the probability by allowing extra
     time for the workqueue to make the item requeueable.

Handle this by giving the dead state a processor function and checking the
for the dead state address rather than seeing if the processor function is
address 0x2.  The dead state processor function can then set a flag to
indicate that it's occurred and give a warning if it occurs more than once
per object.

If this race occurs, an oops similar to the following is seen (note the RIP
value):

BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
IP: [<0000000000000002>] 0x1
PGD 0
Oops: 0010 [#1] SMP
Modules linked in: ...
CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
Workqueue: fscache_object fscache_object_work_func [fscache]
task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000
RIP: 0010:[<0000000000000002>]  [<0000000000000002>] 0x1
RSP: 0018:ffff880717547df8  EFLAGS: 00010202
RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200
RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480
RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510
R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000
R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600
FS:  0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00
 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000
 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900
Call Trace:
 [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache]
 [<ffffffff8109d5db>] process_one_work+0x17b/0x470
 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400
 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400
 [<ffffffff810a5acf>] kthread+0xcf/0xe0
 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
 [<ffffffff816460d8>] ret_from_fork+0x58/0x90
 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeremy McNicoll <jeremymc@redhat.com>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ethtool: do not vzalloc(0) on registers dump

[ Upstream commit 3808d34838184fd29088d6b3a364ba2f1c018fb6 ]

If ->get_regs_len() callback return 0, we allocate 0 bytes of memory,
what print ugly warning in dmesg, which can be found further below.

This happen on mac80211 devices where ieee80211_get_regs_len() just
return 0 and driver only fills ethtool_regs structure and actually
do not provide any dump. However I assume this can happen on other
drivers i.e. when for some devices driver provide regs dump and for
others do not. Hence preventing to to print warning in ethtool code
seems to be reasonable.

ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO)
<snip>
Call Trace:
[<ffffffff813bde47>] dump_stack+0x63/0x8c
[<ffffffff811b0a1f>] warn_alloc+0x13f/0x170
[<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0
[<ffffffff811f0874>] vzalloc+0x54/0x60
[<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30
[<ffffffff816adbb1>] dev_ioctl+0x181/0x520
[<ffffffff816714d2>] sock_do_ioctl+0x42/0x50
<snip>
Mem-Info:
active_anon:435809 inactive_anon:173951 isolated_anon:0
 active_file:835822 inactive_file:196932 isolated_file:0
 unevictable:0 dirty:8 writeback:0 unstable:0
 slab_reclaimable:157732 slab_unreclaimable:10022
 mapped:83042 shmem:306356 pagetables:9507 bounce:0
 free:130041 free_pcp:1080 free_cma:0
Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 3187 7643 7643
Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB
lowmem_reserve[]: 0 0 4456 4456

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

log2: make order_base_2() behave correctly on const input value zero

commit 29905b52fad0854351f57bab867647e4982285bf upstream.

The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.

This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.

So update order_base_2() to adhere to its own documented interface.

[ See

     http://marc.info/?l=linux-kernel&m=147672952517795&w=2

  and follow-up discussion for more background. The gcc "optimization
  pass" is really just broken, but now the GCC trunk problem seems to
  have escaped out of just specially built daily images, so we need to
  work around it in mainline.    - Linus ]

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: respect /proc/sys/kernel/traceoff_on_warning

[ Upstream commit 4f40c6e5627ea73b4e7c615c59631f38cc880885 ]

After much waiting I finally reproduced a KASAN issue, only to find my
trace-buffer empty of useful information because it got spooled out :/

Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning
interface.

Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jump label: pass kbuild_cflags when checking for asm goto support

[ Upstream commit 35f860f9ba6aac56cc38e8b18916d833a83f1157 ]

Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default.  This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.

This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.

Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / runtime: Avoid false-positive warnings from might_sleep_if()

[ Upstream commit a9306a63631493afc75893a4ac405d4e1cbae6aa ]

The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations.  For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]

That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:

 BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
 1 lock held by Xorg/1500:
  #0:  (&dev->struct_mutex){+.+.+.}, at:
  [<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
 CPU: 0 PID: 1500 Comm: Xorg Not tainted
 Call Trace:
  dump_stack+0x85/0xc2
  ___might_sleep+0x196/0x260
  __might_sleep+0x53/0xb0
  __pm_runtime_resume+0x7a/0x90
  intel_runtime_pm_get+0x25/0x90 [i915]
  aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
  i915_vma_bind+0xaf/0x1e0 [i915]
  i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
  i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
  ? trace_hardirqs_on+0xd/0x10
  ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
  ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
  i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
  ? __might_fault+0x4e/0xb0
  i915_gem_execbuffer2+0xc5/0x260 [i915]
  ? __might_fault+0x4e/0xb0
  drm_ioctl+0x206/0x450 [drm]
  ? i915_gem_execbuffer+0x340/0x340 [i915]
  ? __fget+0x5/0x200
  do_vfs_ioctl+0x91/0x6f0
  ? __fget+0x111/0x200
  ? __fget+0x5/0x200
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc6

even though the code triggering it is correct.

Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.

Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches

[ Upstream commit a088d1d73a4bcfd7bc482f8d08375b9b665dc3e5 ]

When for instance a mobile Linux device roams from one access point to
another with both APs sharing the same broadcast domain and a
multicast snooping switch in between:

1)    (c) <~~~> (AP1) <--[SSW]--> (AP2)

2)              (AP1) <--[SSW]--> (AP2) <~~~> (c)

Then currently IPv6 multicast packets will get lost for (c) until an
MLD Querier sends its next query message. The packet loss occurs
because upon roaming the Linux host so far stayed silent regarding
MLD and the snooping switch will therefore be unaware of the
multicast topology change for a while.

This patch fixes this by always resending MLD reports when an interface
change happens, for instance from NO-CARRIER to CARRIER state.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: piix4: Fix request_region size

[ Upstream commit f43128c75202f29ee71aa83e6c320a911137c189 ]

Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.

Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications

[ Upstream commit 5a70348e1187c5bf1cbd0ec51843f36befed1c2d ]

If a context is configured as dualstack ("IPv4v6"), the modem indicates
the context activation with a slightly different indication message.
The dual-stack indication omits the link_type (IPv4/v6) and adds
additional address fields.
IPv6 LSIs are identical to IPv4 LSIs, but have a different link type.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sierra_net: Skip validating irrelevant fields for IDLE LSIs

[ Upstream commit 764895d3039e903dac3a70f219949efe43d036a0 ]

When the context is deactivated, the link_type is set to 0xff, which
triggers a warning message, and results in a wrong link status, as
the LSI is ignored.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns: Fix the device being used for dma mapping during TX

[ Upstream commit b85ea006b6bebb692628f11882af41c3e12e1e09 ]

This patch fixes the device being used to DMA map skb->data.
Erroneous device assignment causes the crash when SMMU is enabled.
This happens during TX since buffer gets DMA mapped with device
correspondign to net_device and gets unmapped using the device
related to DSAF.

Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NET: mkiss: Fix panic

[ Upstream commit 7ba1b689038726d34e3244c1ac9e2e18c2ea4787 ]

If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values.  If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:

[<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
[<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
[<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
[<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)

This patch makes mkiss behave like the 6pack driver. 6pack does not
panic.  In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.

[ralf@linux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]

Signed-off-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NET: Fix /proc/net/arp for AX.25

[ Upstream commit 4872e57c812dd312bf8193b5933fa60585cda42f ]

When sending ARP requests over AX.25 links the hwaddress in the neighbour
cache are not getting initialized.  For such an incomplete arp entry
ax2asc2 will generate an empty string resulting in /proc/net/arp output
like the following:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
172.20.1.99      0x3         0x0              *        bpq0

The missing field will confuse the procfs parsing of arp(8) resulting in
incorrect output for the device such as the following:

$ arp
Address                  HWtype  HWaddress           Flags Mask            Iface
gateway                  ether   52:54:00:00:5d:5f   C                     ens3
172.20.1.99                      (incomplete)                              ens3

This changes the content of /proc/net/arp to:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
172.20.1.99      0x3         0x0         *                     *        bpq0
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3

To do so it change ax2asc to put the string "*" in buf for a NULL address
argument.  Finally the HW address field is left aligned in a 17 character
field (the length of an ethernet HW address in the usual hex notation) for
readability.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Inhibit IPv4-mapped src address on the wire.

[ Upstream commit ec5e3b0a1d41fbda0cc33a45bc9e54e91d9d12c7 ]

This patch adds a check for the problematic case of an IPv4-mapped IPv6
source address and a destination address that is neither an IPv4-mapped
IPv6 address nor in6addr_any, and returns an appropriate error. The
check in done before returning from looking up the route.

Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Handle IPv4-mapped src to in6addr_any dst.

[ Upstream commit 052d2369d1b479cdbbe020fdd6d057d3c342db74 ]

This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.

Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: xilinx_emaclite: fix receive buffer overflow

[ Upstream commit cd224553641848dd17800fe559e4ff5d208553e8 ]

xilinx_emaclite looks at the received data to try to determine the
Ethernet packet length but does not properly clamp it if
proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer
overflow and a panic via skb_panic() as the length exceeds the allocated
skb size.

Fix those cases.

Also add an additional unconditional check with WARN_ON() at the end.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: xilinx_emaclite: fix freezes due to unordered I/O

[ Upstream commit acf138f1b00bdd1b7cd9894562ed0c2a1670888e ]

The xilinx_emaclite uses __raw_writel and __raw_readl for register
accesses. Those functions do not imply any kind of memory barriers and
they may be reordered.

The driver does not seem to take that into account, though, and the
driver does not satisfy the ordering requirements of the hardware.
For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read()
which try to set MDIO address before initiating the transaction.

I'm seeing system freezes with the driver with GCC 5.4 and current
Linux kernels on Zynq-7000 SoC immediately when trying to use the
interface.

In commit 123c1407af87 ("net: emaclite: Do not use microblaze and ppc
IO functions") the driver was switched from non-generic
in_be32/out_be32 (memory barriers, big endian) to
__raw_readl/__raw_writel (no memory barriers, native endian), so
apparently the device follows system endianness and the driver was
originally written with the assumption of memory barriers.

Rather than try to hunt for each case of missing barrier, just switch
the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending
on endianness instead.

Tested on little-endian Zynq-7000 ARM SoC FPGA.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: 123c1407af87 ("net: emaclite: Do not use microblaze and ppc IO
functions")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call echo service immediately after socket reconnect

commit b8c600120fc87d53642476f48c8055b38d6e14c7 upstream.

Commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") changes the behaviour of the SMB2 echo
service and causes it to renegotiate after a socket reconnect. However
under default settings, the echo service could take up to 120 seconds to
be scheduled.

The patch forces the echo service to be called immediately resulting a
negotiate call being made immediately on reconnect.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.

commit baabd567f87be05330faa5140f72a91960e7405a upstream.

The driver attempts to alter memory that is mapped to PCI device.

This is because tx_fwinfo_8190pci points to skb->data

Move the pci_map_single to when completed buffer is ready to be mapped with
psdec is empty to drop on mapping error.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation

commit 46350b71a09ccf3573649e03db55d4b61d5da231 upstream.

Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015):
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf

states the following:

"LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation
up to 396 MHz."

So fix the entry by adding the 25mV margin value as done in the other
entries of the table, which results in 1.15V for 396MHz operation.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Stephane Fillod <f8cfe@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

partitions/msdos: FreeBSD UFS2 file systems are not recognized

commit 223220356d5ebc05ead9a8d697abb0c0a906fc81 upstream.

The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD
and NetBSD partitions and does a reasonable job picking out OpenBSD
and NetBSD UFS subpartitions.

But for FreeBSD the subpartitions are always "bad".

    Kernel: <bsd:bad subpartition - ignored

Though all 3 of these BSD systems use UFS as a file system, only
FreeBSD uses relative start addresses in the subpartition
declarations.

The following patch fixes this for FreeBSD partitions and leaves
the code for OpenBSD and NetBSD intact:

Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/vmem: fix identity mapping

commit c34a69059d7876e0793eb410deedfb08ccb22b02 upstream.

The identity mapping is suboptimal for the last 2GB frame. The mapping
will be established with a mix of 4KB and 1MB mappings instead of a
single 2GB mapping.

This happens because of a off-by-one bug introduced with
commit 50be63450728 ("s390/mm: Convert bootmem to memblock").

Currently the identity mapping looks like this:

0x0000000080000000-0x0000000180000000        4G PUD RW
0x0000000180000000-0x00000001fff00000     2047M PMD RW
0x00000001fff00000-0x0000000200000000        1M PTE RW

With the bug fixed it looks like this:

0x0000000080000000-0x0000000200000000        6G PUD RW

Fixes: 50be63450728 ("s390/mm: Convert bootmem to memblock")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.72

arm64: ensure extension of smp_store_release value

commit 994870bead4ab19087a79492400a5478e2906196 upstream.

When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.

Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).

This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.

A whitespace issue at the top of __smp_store_release() is also
corrected.

No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.

Fixes: 47933ad41a86 ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes: 878a84d5a8a1 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Cc: <stable@vger.kernel.org> # 3.14.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: armv8_deprecated: ensure extension of addr

commit 55de49f9aa17b0b2b144dd2af587177b9aadf429 upstream.

Our compat swp emulation holds the compat user address in an unsigned
int, which it passes to __user_swpX_asm(). When a 32-bit value is passed
in a register, the upper 32 bits of the register are unknown, and we
must extend the value to 64 bits before we can use it as a base address.

This patch casts the address to unsigned long to ensure it has been
suitably extended, avoiding the potential issue, and silencing a related
warning from clang.

Fixes: bd35a4adc413 ("arm64: Port SWP/SWPB emulation support from arm")
Cc: <stable@vger.kernel.org> # 3.19.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usercopy: Adjust tests to deal with SMAP/PAN

commit f5f893c57e37ca730808cb2eee3820abd05e7507 upstream.

Under SMAP/PAN/etc, we cannot write directly to userspace memory, so
this rearranges the test bytes to get written through copy_to_user().
Additionally drops the bad copy_from_user() test that would trigger a
memcpy() against userspace on failure.

[arnd: the test module was added in 3.14, and this backported patch
       should apply cleanly on all version from 3.14 to 4.10.
       The original patch was in 4.11 on top of a context change
       I saw the bug triggered with kselftest on a 4.4.y stable kernel]

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/qib,hfi1: Fix MR reference count leak on write with immediate

commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream.

The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory
reference when a buffer cannot be allocated for returning the immediate
data.

The issue is that the rkey validation has already occurred and the RNR
nak fails to release the reference that was fruitlessly gotten.  The
the peer will send the identical single packet request when its RNR
timer pops.

The fix is to release the held reference prior to the rnr nak exit.
This is the only sequence the requires both rkey validation and the
buffer allocation on the same packet.

Cc: Stable <stable@vger.kernel.org> # 4.7+
Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: entry: improve data abort handling of tagged pointers

commit 276e93279a630657fff4b086ba14c95955912dfa upstream.

This backport has a minor difference from the upstream commit: it adds
the asm-uaccess.h file, which is not present in 4.4, because 4.4 does
not have commit b4b8664d291a ("arm64: don't pull uaccess.h into *.S").

Original patch description:

When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).

When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.

Fixes: d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: hw_breakpoint: fix watchpoint matching for tagged pointers

commit 7dcd9dd8cebe9fa626af7e2358d03a37041a70fb upstream.

This backport has a few small differences from the upstream commit:
 - The address tag is removed in watchpoint_handler() instead of
   get_distance_from_watchpoint(), because 4.4 does not have commit
   fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact watchpoint
   addresses").
 - A macro is backported (untagged_addr), as it is not present in 4.4.

Original patch description:

When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.

The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.

Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.

Fixes: d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make __xfs_xattr_put_listen preperly report errors.

commit 791cc43b36eb1f88166c8505900cad1b43c7fe1a upstream.

Commit 2a6fba6 "xfs: only return -errno or success from attr ->put_listent"
changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is
insufficient space in the buffer assuming that setting context->count to -1
would be enough, but all of the ->put_listent callers only check seen_enough.
This results in a failed assertion:
XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175
in insufficient buffer size case.

This is only reproducible with at least 2 xattrs and only when the buffer
gets depleted before the last one.

Furthermore if buffersize is such that it is enough to hold the last xattr's
name, but not enough to hold the sum of preceeding xattr names listxattr won't
fail with ERANGE, but will suceed returning last xattr's name without the
first character. The first character end's up overwriting data stored at
(context->alist - 1).

Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Don't perform cached access checks before we've OPENed the file

commit 762674f86d0328d5dc923c966e209e1ee59663f2 upstream.

Donald Buczek reports that a nfs4 client incorrectly denies
execute access based on outdated file mode (missing 'x' bit).
After the mode on the server is 'fixed' (chmod +x) further execution
attempts continue to fail, because the nfs ACCESS call updates
the access parameter but not the mode parameter or the mode in
the inode.

The root cause is ultimately that the VFS is calling may_open()
before the NFS client has a chance to OPEN the file and hence revalidate
the access and attribute caches.

Al Viro suggests:
>>> Make nfs_permission() relax the checks when it sees MAY_OPEN, if you know
>>> that things will be caught by server anyway?
>>
>> That can work as long as we're guaranteed that everything that calls
>> inode_permission() with MAY_OPEN on a regular file will also follow up
>> with a vfs_open() or dentry_open() on success. Is this always the
>> case?
>
> 1) in do_tmpfile(), followed by do_dentry_open() (not reachable by NFS since
> it doesn't have ->tmpfile() instance anyway)
>
> 2) in atomic_open(), after the call of ->atomic_open() has succeeded.
>
> 3) in do_last(), followed on success by vfs_open()
>
> That's all.  All calls of inode_permission() that get MAY_OPEN come from
> may_open(), and there's no other callers of that puppy.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=109771
Link: http://lkml.kernel.org/r/1451046656-26319-1-git-send-email-buczek@molgen.mpg.de
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Ensure we revalidate attributes before using execute_ok()

commit 5c5fc09a1157a11dbe84e6421c3e0b37d05238cb upstream.

Donald Buczek reports that NFS clients can also report incorrect
results for access() due to lack of revalidation of attributes
before calling execute_ok().
Looking closely, it seems chdir() is afflicted with the same problem.

Fix is to ensure we call nfs_revalidate_inode_rcu() or
nfs_revalidate_inode() as appropriate before deciding to trust
execute_ok().

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Link: http://lkml.kernel.org/r/1451331530-3748-1-git-send-email-buczek@molgen.mpg.de
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: consider memblock reservations for deferred memory initialization sizing

commit 864b9a393dcb5aed09b8fd31b9bbda0fdda99374 upstream.

We have seen an early OOM killer invocation on ppc64 systems with
crashkernel=4096M:

kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0
kthreadd cpuset=/ mems_allowed=7
CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1
Call Trace:
  dump_stack+0xb0/0xf0 (unreliable)
  dump_header+0xb0/0x258
  out_of_memory+0x5f0/0x640
  __alloc_pages_nodemask+0xa8c/0xc80
  kmem_getpages+0x84/0x1a0
  fallback_alloc+0x2a4/0x320
  kmem_cache_alloc_node+0xc0/0x2e0
  copy_process.isra.25+0x260/0x1b30
  _do_fork+0x94/0x470
  kernel_thread+0x48/0x60
  kthreadd+0x264/0x330
  ret_from_kernel_thread+0x5c/0xa4

Mem-Info:
active_anon:0 inactive_anon:0 isolated_anon:0
 active_file:0 inactive_file:0 isolated_file:0
 unevictable:0 dirty:0 writeback:0 unstable:0
 slab_reclaimable:5 slab_unreclaimable:73
 mapped:0 shmem:0 pagetables:0 bounce:0
 free:0 free_pcp:0 free_cma:0
Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 0 0 0
Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB
0 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
819200 pages RAM
0 pages HighMem/MovableOnly
817481 pages reserved
0 pages cma reserved
0 pages hwpoisoned

the reason is that the managed memory is too low (only 110MB) while the
rest of the the 50GB is still waiting for the deferred intialization to
be done.  update_defer_init estimates the initial memoty to initialize
to 2GB at least but it doesn't consider any memory allocated in that
range.  In this particular case we've had

Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)

so the low 2GB is mostly depleted.

Fix this by considering memblock allocations in the initial static
initialization estimation.  Move the max_initialise to
reset_deferred_meminit and implement a simple memblock_reserved_memory
helper which iterates all reserved blocks and sums the size of all that
start below the given address.  The cumulative size is than added on top
of the initial estimation.  This is still not ideal because
reset_deferred_meminit doesn't consider holes and so reservation might
be above the initial estimation whihch we ignore but let's make the
logic simpler until we really need to handle more complicated cases.

Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: better skb->sender_cpu and skb->napi_id cohabitation

commit 52bd2d62ce6758d811edcbd2256eb9ea7f6a56cb upstream.

skb->sender_cpu and skb->napi_id share a common storage,
and we had various bugs about this.

We had to call skb_sender_cpu_clear() in some places to
not leave a prior skb->napi_id and fool netdev_pick_tx()

As suggested by Alexei, we could split the space so that
these errors can not happen.

0 value being reserved as the common (not initialized) value,
let's reserve [1 .. NR_CPUS] range for valid sender_cpu,
and [NR_CPUS+1 .. ~0U] for valid napi_id.

This will allow proper busy polling support over tunnels.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Fix panic when serial console and DMA are enabled

commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream.

This patch fixes an issue that kernel panic happens when DMA is enabled
and we press enter key while the kernel booting on the serial console.

* An interrupt may occur after sci_request_irq().
* DMA transfer area is initialized by setup_timer() in sci_request_dma()
  and used in interrupt.

If an interrupt occurred between sci_request_irq() and setup_timer() in
sci_request_dma(), DMA transfer area has not been initialized yet.
So, this patch changes the order of sci_request_irq() and
sci_request_dma().

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com>
[Shimoda changes the commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Drop krefs for interrupted tty lock

commit e9036d0662360cd4c79578565ce422ed5872f301 upstream.

When the tty lock is interrupted on attempted re-open, 2 tty krefs
are still held. Drop extra kref before returning failure from
tty_lock_interruptible(), and drop lookup kref before returning
failure from tty_open().

Fixes: 0bfd464d3fdd ("tty: Wait interruptibly for tty lock on reopen")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: char: mem: Fix wraparound check to allow mappings up to the end

commit 32829da54d9368103a2f03269a5120aa9ee4d5da upstream.

A recent fix to /dev/mem prevents mappings from wrapping around the end
of physical address space. However, the check was written in a way that
also prevents a mapping reaching just up to the end of physical address
space, which may be a valid use case (especially on 32-bit systems).
This patch fixes it by checking the last mapped address (instead of the
first address behind that) for overflow.

Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()")
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Fix use-after-free at card unregistration

commit 4efda5f2130da033aeedc5b3205569893b910de2 upstream.

soc_cleanup_card_resources() call snd_card_free() at the last of its
procedure.  This turned out to lead to a use-after-free.
PCM runtimes have been already removed via soc_remove_pcm_runtimes(),
while it's dereferenced later in soc_pcm_free() called via
snd_card_free().

The fix is simple: just move the snd_card_free() call to the beginning
of the whole procedure.  This also gives another benefit: it
guarantees that all operations have been shut down before actually
releasing the resources, which was racy until now.

Reported-and-tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT

commit ba3021b2c79b2fa9114f92790a99deb27a65b728 upstream.

snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices.  Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:

  BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
  CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x143/0x1b0 lib/dump_stack.c:52
   kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
   kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
   copy_to_user ./arch/x86/include/asm/uaccess.h:725
   snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
   do_loop_readv_writev fs/read_write.c:716
   __do_readv_writev+0x94c/0x1380 fs/read_write.c:864
   do_readv_writev fs/read_write.c:894
   vfs_readv fs/read_write.c:908
   do_readv+0x52a/0x5d0 fs/read_write.c:934
   SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
   SyS_readv+0x87/0xb0 fs/read_write.c:1018

This patch adds the missing reset of queue indices.  Together with the
previous fix for the ioctl/read race, we cover the whole problem.

Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Fix race between read and ioctl

commit d11662f4f798b50d8c8743f433842c3e40fe3378 upstream.

The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked.  We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.

This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.

Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/tmr: fully separate alarm execution/pending lists

commit b4e382ca7586a63b6c1e5221ce0863ff867c2df6 upstream.

Reusing the list_head for both is a bad idea.  Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.

The execution list should not require its own locking, the single function
that uses it can only be called from a single context.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Make sure backup_handle is always valid

commit 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c upstream.

When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.

The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.

Reported-by: Murray McAllister <murray.mcallister@insomniasec.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()

commit ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf upstream.

The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.

References:
https://bugzilla.redhat.com/show_bug.cgi?id=1437431

Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()

commit f0c62e9878024300319ba2438adc7b06c6b9c448 upstream.

If vmalloc() fails then we need to a bit of cleanup before returning.

Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Drop kernel samples even though :u is specified

commit cc1582c231ea041fbc68861dfaf957eaf902b829 upstream.

When doing sampling, for example:

  perf record -e cycles:u ...

On workloads that do a lot of kernel entry/exits we see kernel
samples, even though :u is specified. This is due to skid existing.

This might be a security issue because it can leak kernel addresses even
though kernel sampling support is disabled.

The patch drops the kernel samples if exclude_kernel is specified.

For example, test on Haswell desktop:

  perf record -e cycles:u <mgen>
  perf report --stdio

Before patch applied:

    99.77%  mgen     mgen              [.] buf_read
     0.20%  mgen     mgen              [.] rand_buf_init
     0.01%  mgen     [kernel.vmlinux]  [k] apic_timer_interrupt
     0.00%  mgen     mgen              [.] last_free_elem
     0.00%  mgen     libc-2.23.so      [.] __random_r
     0.00%  mgen     libc-2.23.so      [.] _int_malloc
     0.00%  mgen     mgen              [.] rand_array_init
     0.00%  mgen     [kernel.vmlinux]  [k] page_fault
     0.00%  mgen     libc-2.23.so      [.] __random
     0.00%  mgen     libc-2.23.so      [.] __strcasestr
     0.00%  mgen     ld-2.23.so        [.] strcmp
     0.00%  mgen     ld-2.23.so        [.] _dl_start
     0.00%  mgen     libc-2.23.so      [.] sched_setaffinity@@GLIBC_2.3.4
     0.00%  mgen     ld-2.23.so        [.] _start

We can see kernel symbols apic_timer_interrupt and page_fault.

After patch applied:

    99.79%  mgen     mgen           [.] buf_read
     0.19%  mgen     mgen           [.] rand_buf_init
     0.00%  mgen     libc-2.23.so   [.] __random_r
     0.00%  mgen     mgen           [.] rand_array_init
     0.00%  mgen     mgen           [.] last_free_elem
     0.00%  mgen     libc-2.23.so   [.] vfprintf
     0.00%  mgen     libc-2.23.so   [.] rand
     0.00%  mgen     libc-2.23.so   [.] __random
     0.00%  mgen     libc-2.23.so   [.] _int_malloc
     0.00%  mgen     libc-2.23.so   [.] _IO_doallocbuf
     0.00%  mgen     ld-2.23.so     [.] do_lookup_x
     0.00%  mgen     ld-2.23.so     [.] open_verify.constprop.7
     0.00%  mgen     ld-2.23.so     [.] _dl_important_hwcaps
     0.00%  mgen     libc-2.23.so   [.] sched_setaffinity@@GLIBC_2.3.4
     0.00%  mgen     ld-2.23.so     [.] _start

There are only userspace symbols.

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Cc: mark.rutland@arm.com
Cc: will.deacon@arm.com
Cc: yao.jin@intel.com
Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hotplug-mem: Fix missing endian conversion of aa_index

commit dc421b200f91930c9c6a9586810ff8c232cf10fc upstream.

When adding or removing memory, the aa_index (affinity value) for the
memblock must also be converted to match the endianness of the rest
of the 'ibm,dynamic-memory' property.  Otherwise, subsequent retrieval
of the attribute will likely lead to non-existent nodes, followed by
using the default node in the code inappropriately.

Fixes: 5f97b2a0d176 ("powerpc/pseries: Implement memory hotplug add in the kernel")
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/numa: Fix percpu allocations to be NUMA aware

commit ba4a648f12f4cd0a8003dd229b6ca8a53348ee4b upstream.

In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we
switched to the generic implementation of cpu_to_node(), which uses a percpu
variable to hold the NUMA node for each CPU.

Unfortunately we neglected to notice that we use cpu_to_node() in the allocation
of our percpu areas, leading to a chicken and egg problem. In practice what
happens is when we are setting up the percpu areas, cpu_to_node() reports that
all CPUs are on node 0, so we allocate all percpu areas on node 0.

This is visible in the dmesg output, as all pcpu allocs being in group 0:

  pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
  pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
  pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
  pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31
  pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39
  pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47

To fix it we need an early_cpu_to_node() which can run prior to percpu being
setup. We already have the numa_cpu_lookup_table we can use, so just plumb it
in. With the patch dmesg output shows two groups, 0 and 1:

  pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
  pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
  pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23
  pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31
  pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39
  pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47

We can also check the data_offset in the paca of various CPUs, with the fix we
see:

  CPU 0:  data_offset = 0x0ffe8b0000
  CPU 24: data_offset = 0x1ffe5b0000

And we can see from dmesg that CPU 24 has an allocation on node 1:

  node   0: [mem 0x0000000000000000-0x0000000fffffffff]
  node   1: [mem 0x0000001000000000-0x0000001fffffffff]

Fixes: 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/eeh: Avoid use after free in eeh_handle_special_event()

commit daeba2956f32f91f3493788ff6ee02fb1b2f02fa upstream.

eeh_handle_special_event() is called when an EEH event is detected but
can't be narrowed down to a specific PE.  This function looks through
every PE to find one in an erroneous state, then calls the regular event
handler eeh_handle_normal_event() once it knows which PE has an error.

However, if eeh_handle_normal_event() found that the PE cannot possibly
be recovered, it will free it, rendering the passed PE stale.
This leads to a use after free in eeh_handle_special_event() as it attempts to
clear the "recovering" state on the PE after eeh_handle_normal_event() returns.

Thus, make sure the PE is valid when attempting to clear state in
eeh_handle_special_event().

Fixes: 8a6b1bc70dbb ("powerpc/eeh: EEH core to handle special event")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: don't disable a not previously enabled PCI device

commit ddff7ed45edce4a4c92949d3c61cd25d229c4a14 upstream.

When pci_enable_device() or pci_enable_device_mem() fail in
qla2x00_probe_one() we bail out but do a call to
pci_disable_device(). This causes the dev_WARN_ON() in
pci_disable_device() to trigger, as the device wasn't enabled
previously.

So instead of taking the 'probe_out' error path we can directly return
*iff* one of the pci_enable_device() calls fails.

Additionally rename the 'probe_out' goto label's name to the more
descriptive 'disable_device'.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages

commit d6dbdd3c8558cad3b6d74cc357b408622d122331 upstream.

Under memory pressure, we start ageing pages, which amounts to parsing
the page tables. Since we don't want to allocate any extra level,
we pass NULL for our private allocation cache. Which means that
stage2_get_pud() is allowed to fail. This results in the following
splat:

[ 1520.409577] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1520.417741] pgd = ffff810f52fef000
[ 1520.421201] [00000008] *pgd=0000010f636c5003, *pud=0000010f56f48003, *pmd=0000000000000000
[ 1520.429546] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 1520.435156] Modules linked in:
[ 1520.438246] CPU: 15 PID: 53550 Comm: qemu-system-aar Tainted: G        W       4.12.0-rc4-00027-g1885c397eaec #7205
[ 1520.448705] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB12A 10/26/2016
[ 1520.463726] task: ffff800ac5fb4e00 task.stack: ffff800ce04e0000
[ 1520.469666] PC is at stage2_get_pmd+0x34/0x110
[ 1520.474119] LR is at kvm_age_hva_handler+0x44/0xf0
[ 1520.478917] pc : [<ffff0000080b137c>] lr : [<ffff0000080b149c>] pstate: 40000145
[ 1520.486325] sp : ffff800ce04e33d0
[ 1520.489644] x29: ffff800ce04e33d0 x28: 0000000ffff40064
[ 1520.494967] x27: 0000ffff27e00000 x26: 0000000000000000
[ 1520.500289] x25: ffff81051ba65008 x24: 0000ffff40065000
[ 1520.505618] x23: 0000ffff40064000 x22: 0000000000000000
[ 1520.510947] x21: ffff810f52b20000 x20: 0000000000000000
[ 1520.516274] x19: 0000000058264000 x18: 0000000000000000
[ 1520.521603] x17: 0000ffffa6fe7438 x16: ffff000008278b70
[ 1520.526940] x15: 000028ccd8000000 x14: 0000000000000008
[ 1520.532264] x13: ffff7e0018298000 x12: 0000000000000002
[ 1520.537582] x11: ffff000009241b93 x10: 0000000000000940
[ 1520.542908] x9 : ffff0000092ef800 x8 : 0000000000000200
[ 1520.548229] x7 : ffff800ce04e36a8 x6 : 0000000000000000
[ 1520.553552] x5 : 0000000000000001 x4 : 0000000000000000
[ 1520.558873] x3 : 0000000000000000 x2 : 0000000000000008
[ 1520.571696] x1 : ffff000008fd5000 x0 : ffff0000080b149c
[ 1520.577039] Process qemu-system-aar (pid: 53550, stack limit = 0xffff800ce04e0000)
[...]
[ 1521.510735] [<ffff0000080b137c>] stage2_get_pmd+0x34/0x110
[ 1521.516221] [<ffff0000080b149c>] kvm_age_hva_handler+0x44/0xf0
[ 1521.522054] [<ffff0000080b0610>] handle_hva_to_gpa+0xb8/0xe8
[ 1521.527716] [<ffff0000080b3434>] kvm_age_hva+0x44/0xf0
[ 1521.532854] [<ffff0000080a58b0>] kvm_mmu_notifier_clear_flush_young+0x70/0xc0
[ 1521.539992] [<ffff000008238378>] __mmu_notifier_clear_flush_young+0x88/0xd0
[ 1521.546958] [<ffff00000821eca0>] page_referenced_one+0xf0/0x188
[ 1521.552881] [<ffff00000821f36c>] rmap_walk_anon+0xec/0x250
[ 1521.558370] [<ffff000008220f78>] rmap_walk+0x78/0xa0
[ 1521.563337] [<ffff000008221104>] page_referenced+0x164/0x180
[ 1521.569002] [<ffff0000081f1af0>] shrink_active_list+0x178/0x3b8
[ 1521.574922] [<ffff0000081f2058>] shrink_node_memcg+0x328/0x600
[ 1521.580758] [<ffff0000081f23f4>] shrink_node+0xc4/0x328
[ 1521.585986] [<ffff0000081f2718>] do_try_to_free_pages+0xc0/0x340
[ 1521.592000] [<ffff0000081f2a64>] try_to_free_pages+0xcc/0x240
[...]

The trivial fix is to handle this NULL pud value early, rather than
dereferencing it blindly.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix memory leak in update_space_info failure path

commit 896533a7da929136d0432713f02a3edffece2826 upstream.

If we fail to add the space_info kobject, we'll leak the memory
for the percpu counter.

Fixes: 6ab0a2029c (btrfs: publish allocation data in sysfs)
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: use correct types for page indices in btrfs_page_exists_in_range

commit cc2b702c52094b637a351d7491ac5200331d0445 upstream.

Variables start_idx and end_idx are supposed to hold a page index
derived from the file offsets. The int type is not the right one though,
offsets larger than 1 << 44 will get silently trimmed off the high bits.
(1 << 44 is 16TiB)

What can go wrong, if start is below the boundary and end gets trimmed:
- if there's a page after start, we'll find it (radix_tree_gang_lookup_slot)
- the final check "if (page->index <= end_idx)" will unexpectedly fail

The function will return false, ie. "there's no page in the range",
although there is at least one.

btrfs_page_exists_in_range is used to prevent races in:

* in hole punching, where we make sure there are not pages in the
  truncated range, otherwise we'll wait for them to finish and redo
  truncation, but we're going to replace the pages with holes anyway so
  the only problem is the intermediate state

* lock_extent_direct: we want to make sure there are no pages before we
  lock and start DIO, to prevent stale data reads

For practical occurence of the bug, there are several constaints.  The
file must be quite large, the affected range must cross the 16TiB
boundary and the internal state of the file pages and pending operations
must match.  Also, we must not have started any ordered data in the
range, otherwise we don't even reach the buggy function check.

DIO locking tries hard in several places to avoid deadlocks with
buffered IO and avoids waiting for ranges. The worst consequence seems
to be stale data read.

CC: Liu Bo <bo.li.liu@oracle.com>
Fixes: fc4adbff823f7 ("btrfs: Drop EXTENT_UPTODATE check in hole punching and direct locking")
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Fix error path on bad ioctl

commit cec422c11caeeccae709e9942058b6b644ce434c upstream.

Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK
ioctl. We shouldn't unlock the context status mutex as it was not
locked (yet).

Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts")
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path

commit 006351ac8ead0d4a67dd3845e3ceffe650a23212 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()

commit 940ef1a0ed939c2ca029fca715e25e7778ce1e34 upstream.

... and it really needs splitting into "new" and "extend" cases, but that's for
later

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ufs: set correct ->s_maxsize

commit 6b0d144fa758869bdd652c50aa41aaf601232550 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ufs: restore maintaining ->i_blocks

commit eb315d2ae614493fd1ebb026c75a80573d84f7ad upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix ufs_isblockset()

commit 414cf7186dbec29bd946c138d6b5c09da5955a08 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ufs: restore proper tail allocation

commit 8785d84d002c2ce0f68fbcd6c2c86be859802c7e upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: add i_blocksize()

commit 93407472a21b82f39c955ea7787e5bc7da100642 upstream.

Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset: consider dying css as offline

commit 41c25707d21716826e3c1f60967f5550610ec1c9 upstream.

In most cases, a cgroup controller don't care about the liftimes of
cgroups.  For the controller, a css becomes online when ->css_online()
is called on it and offline when ->css_offline() is called.

However, cpuset is special in that the user interface it exposes cares
whether certain cgroups exist or not.  Combined with the RCU delay
between cgroup removal and css offlining, this can lead to user
visible behavior oddities where operations which should succeed after
cgroup removals fail for some time period.  The effects of cgroup
removals are delayed when seen from userland.

This patch adds css_is_dying() which tests whether offline is pending
and updates is_cpuset_online() so that the function returns false also
while offline is pending.  This gets rid of the userland visible
delays.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>