Benoit Goby [Wed, 11 Aug 2010 23:53:42 +0000 (16:53 -0700)]
mfd: cpcap-whisper: Ignore the SE1 bit to detect host mode
The Nexus One data pins are in the SE1 state until vbus is powered.
Ignore the SE1 bit to fix host mode detection when a Nexus One is
attached.
Change-Id: Ia2314b26acdb1d20fa0a43812f88c232c919cba3
Signed-off-by: Benoit Goby <benoit@android.com>
Dima Zavin [Mon, 23 Aug 2010 18:12:17 +0000 (11:12 -0700)]
ARM: tegra: stingray: temporarily disable LP0 (AVP suspend)
Change-Id: Iaedd594aba25649f934dea6d0e715de72f08ed1a
Signed-off-by: Dima Zavin <dima@android.com>
Kaz Fukuoka [Fri, 30 Jul 2010 20:13:01 +0000 (13:13 -0700)]
[ARM] tegra: stingray: CPU-AVP RPC in kernel
- /dev/nvfw ioctl interface to load AVP firmware.
- Use request_firmware() for AVP modules
- /dev/nvrpc ioctl interface to call RPC on AVP.
- Server thread to serve RPC from AVP.
Change-Id: I1694dc49d69b677cd225f8b68a4f84edf9bf0a23
Signed-off-by: Dima Zavin <dima@android.com>
Mike Lockwood [Fri, 20 Aug 2010 23:49:07 +0000 (19:49 -0400)]
[ARM] tegra: stingray: defconfig: Enable CONFIG_USB_ANDROID_RNDIS
Signed-off-by: Mike Lockwood <lockwood@android.com>
Mike Lockwood [Fri, 20 Aug 2010 23:46:17 +0000 (19:46 -0400)]
[ARM] tegra: stingray: Add support for RNDIS USB function.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Nick Pelly [Fri, 20 Aug 2010 02:27:10 +0000 (19:27 -0700)]
mdm6600: Don't panic on wrong port.
Lack of power management on the mdm6600 driver causes it to sometimes
open with a bad port after USB re-unemeration. WARN_ON_ONCE instead of
BUG_ON.
Change-Id: Iae6c7aa2c1f2b30ff879a1b744a5efeef01664f9
Signed-off-by: Nick Pelly <npelly@google.com>
Rebecca Schultz Zavin [Fri, 20 Aug 2010 00:12:04 +0000 (17:12 -0700)]
[ARM] tegra: nvrm: Remove NvRm reset and clock controls for camera
These controls are no longer used.
Change-Id: I5259a799777471272b54682d4bfef9a0739964ec
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
S. Holmes [Thu, 19 Aug 2010 15:31:17 +0000 (09:31 -0600)]
tegra: nvrm: Add VDE, VCP, and BSEA to RM clock & module APIs
Add the VDE, VCP, and BSEA blocks to the RM clock and module APIs so that
video and audio playback will work.
Change-Id: I4a7d9121239967f6b76b0a585a818d1047a56993
Jay Cheng [Fri, 20 Aug 2010 00:04:36 +0000 (17:04 -0700)]
[ARM] tegra: stingray: change uartc clock source to pll_m.
With PLL_M (600Mhz) as clock source, it produces the closest 3M baud rate
required by BT module.
Change-Id: I9a33f415a8a13fbb68589d5b2575f7c7beab5c44
Signed-off-by: Jay Cheng <jacheng@nvidia.com>
Praveen Bharathi [Thu, 12 Aug 2010 16:11:32 +0000 (11:11 -0500)]
board-stingray-power: add notification led driver
Change-Id: Ia2a6f7d2f5734e815a6fabc1d4752eb3bcddde9d
Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
Praveen Bharathi [Thu, 12 Aug 2010 16:10:44 +0000 (11:10 -0500)]
leds: stingray: add blink support for cpcap leds
Allows individual led to support blink capability
Change-Id: If2c7bd8a4bc617e3049b0db3a6fec4f92b06c0e5
Signed-off-by: Praveen Bharathi <pbharathi@motorola.com>
Greg Meiste [Fri, 13 Aug 2010 18:40:12 +0000 (13:40 -0500)]
[ARM] tegra: stingray: Charge LED GPIO moved on P2
Support the charge LED on P2 hardware.
Change-Id: I2e8733f11d98c29015282520f8f560b5734f8696
Signed-off-by: Greg Meiste <w30289@motorola.com>
James Wylder [Mon, 9 Aug 2010 15:56:53 +0000 (10:56 -0500)]
[ARM] tegra: stingray: USB current drain reduction.
At boot time the kernel should:
USB_FORCEON_N (GPIO_TEGRA_PC5) should be initialized output high.
ULPI_PHY_RESET_B (GPIO_TEGRA_PG2) should be initialized output low.
Signed-off-by: James Wylder <james.wylder@motorola.com>
Change-Id: I92a59c5fff4a9d3dd68a3ce3bd6a6c134241146d
Greg Meiste [Mon, 16 Aug 2010 16:13:27 +0000 (11:13 -0500)]
[ARM] tegra: stingray: Configure CPCAP Switchers for low power
CPCAP switchers 2, 3, and 4 need to be set to PSM mode in normal mode
and PFM mode in low power mode. CPCAP switchers 2 and 4 should be set
to 0.95v in low power mode. This will provide some current drain
savings.
Change-Id: Ie506305dd011dfc14fda5fd24562539149352bb9
Signed-off-by: Greg Meiste <w30289@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Ramesh Sudini [Thu, 19 Aug 2010 18:37:23 +0000 (13:37 -0500)]
[ARM] tegra: stingray: defconfig: enable whisper HID
Change-Id: I29ad1993a06adf6ac6a7b5093cc7cba9b4111fa1
Signed-off-by: Ramesh Sudini <ramesh.sudini@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Ramesh Sudini [Thu, 19 Aug 2010 18:21:37 +0000 (13:21 -0500)]
HID: hid-motorola: whisper HID driver
Signed-off-by: Ramesh Sudini <ramesh.sudini@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Change-Id: I63a1c5358f8536916e29d18e298ea495deddcbae
James Wylder [Thu, 19 Aug 2010 02:15:03 +0000 (19:15 -0700)]
[ARM] tegra: stingray: implement display suspend/resume callbacks
Implement the init/suspend/resume callbacks to initialize,
clear, and set the lvds gpio respectively.
Change-Id: Id7b7481ceff481088089b7b914cea321ad04350f
Signed-off-by: James Wylder <james.wylder@motorola.com>
Rebecca Schultz Zavin [Tue, 10 Aug 2010 20:02:19 +0000 (13:02 -0700)]
[ARM] tegra: Modify board-stingray to use correct name for tegra_camera device
Change-Id: I2dfd8100b264ecbfb43eed669881ec535c8a7bcd
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Tue, 10 Aug 2010 20:00:02 +0000 (13:00 -0700)]
media: video: tegra: Move tegra_isp to tegra_camera and add functionality
The tegra_camera device has been extended to include all clock and
regulator functionality needed by to support camera on tegra.
Change-Id: Ie1611a79c24f7ebe3ae570d38a9f470683af91dd
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Colin Cross [Mon, 2 Aug 2010 23:13:38 +0000 (16:13 -0700)]
[ARM] tegra: stingray: Enable LP0 suspend
Change-Id: I263eee7206c7109cb766e3dbad991304a6ebc9ab
Signed-off-by: Colin Cross <ccross@google.com>
Rebecca Schultz Zavin [Tue, 10 Aug 2010 20:05:59 +0000 (13:05 -0700)]
[ARM] tegra: Specifiy regulator by device name in stingray board file
This change adds the ability to specify a regulator by device name
and modifies one consumer to use this functionality.
Change-Id: I7f4df5f60458717049c3a8abe52d7eb0b99dad89
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Wed, 18 Aug 2010 21:00:18 +0000 (14:00 -0700)]
[ARM] configs: Enable soc2030 2MP imager in stingray defconfig
Change-Id: I58f571c78a64adda4f70e7f3c87b3e3d218cc185
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Iliyan Malchev [Thu, 12 Aug 2010 00:43:34 +0000 (17:43 -0700)]
[ARM] tegra: cpcap-audio: enable turning off audio-output paths
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Fri, 6 Aug 2010 22:39:41 +0000 (15:39 -0700)]
[ARM] tegra: cpcap-audio: add support for selecting audio inputs
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Fri, 6 Aug 2010 22:32:33 +0000 (15:32 -0700)]
[ARM] tegra: stingray: add mic2 and correct mic1 configuration
Signed-off-by: Iliyan Malchev <malchev@google.com>
Jaikumar Ganesh [Mon, 16 Aug 2010 22:51:09 +0000 (15:51 -0700)]
[ARM] tegra: stingray: Add HID drivers.
Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
Greg Meiste [Fri, 13 Aug 2010 18:16:50 +0000 (13:16 -0500)]
mfd: cpcap-whisper: Tweak to support real Whisper docks
The real Whisper basic dock behaves a bit different than the prototype.
Detection must be tweaked to properly detect the accessory when it is
plugged into the wall.
Change-Id: I7e2c4708b7c6642c3b58ebed199632be59804740
Signed-off-by: Greg Meiste <w30289@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Greg Meiste [Thu, 29 Jul 2010 20:50:51 +0000 (15:50 -0500)]
mfd: cpcap-whisper: Update configuration for Whisper Smart
Smart Whisper accessories need a different configuration, so they are
now their own accessory
Change-Id: I16167a01ae3f3cdfd0c9765771459ff38cbc6b31
Signed-off-by: Greg Meiste <w30289@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Greg Meiste [Thu, 29 Jul 2010 19:23:26 +0000 (14:23 -0500)]
mfd: cpcap-whisper: Report dock ID to system
Add support for whisper driver to report the dock ID to the system
via sysfs. The dock ID can be found at:
/sys/class/switch/dock/dock_addr
Change-Id: Iafcc738c5e9bd10f94ee2cab1ab0d39a10b9932e
Signed-off-by: Greg Meiste <w30289@motorola.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Dmitry Shmidt [Mon, 16 Aug 2010 17:57:13 +0000 (10:57 -0700)]
mmc: sdhci-tegra: Set MMC_PM_KEEP_POWER flag in case of built-in device
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Mike Lockwood [Fri, 13 Aug 2010 15:31:20 +0000 (11:31 -0400)]
[ARM] tegra: stingray_defconfig: Enable CONFIG_FUSE_FS
Signed-off-by: Mike Lockwood <lockwood@android.com>
Erik Gilling [Fri, 13 Aug 2010 00:28:12 +0000 (17:28 -0700)]
video: tegra: unpin nvmap handles after flip
Signed-off-by: Erik Gilling <konkers@android.com>
Colin Cross [Wed, 11 Aug 2010 22:23:50 +0000 (15:23 -0700)]
[ARM] tegra: stingray: Configure SYS_RESTART_B gpio
Change-Id: I8ccdf18a0b34877a5689a968ad253b2eb7a7a4f3
Signed-off-by: Colin Cross <ccross@google.com>
Sergey Kudakov [Wed, 11 Aug 2010 23:18:51 +0000 (18:18 -0500)]
leds: leds-lp8550: fix a typo in suspend/resume handlers
Change-Id: I1445b90b9f31ec69d8ec298cae68ed9d75fb5abd
Signed-off-by: Sergey Kudakov <sergey.kudakov@motorola.com>
Nick Pelly [Tue, 10 Aug 2010 21:46:06 +0000 (14:46 -0700)]
mdm6600: Use pre-allocated, dma-coherent bulk buffer pool.
The generic bulk handlers use dynamic buffer allocation. This is likely
to be a performance issue.
Change-Id: I9a66131d500b6152d9af118d739f3a2f3dea97c9
Signed-off-by: Nick Pelly <npelly@google.com>
Nick Pelly [Thu, 29 Jul 2010 19:05:57 +0000 (12:05 -0700)]
[ARM] tegra: stingray: switch to new mdm6600 driver in defconfig
Change-Id: I24d8f1deeea99adb2dfb934a3b7984ecdada9d39
Signed-off-by: Nick Pelly <npelly@google.com>
Nick Pelly [Thu, 29 Jul 2010 19:05:22 +0000 (12:05 -0700)]
mdm6600: Add mdm6600 usb-serial driver.
This is a re-write of the Motorola mdm6600_modem driver.
The usb_serial_generic_* handlers actually cover the USB bulk to serial data
path. So that code disappears.
The USB interrupt data to TIOCMGET ioctl path does not appear to be used by
pppd in userspace, using a temporary BUG_ON() to confirm.
So we end up with very little but a hook to register generic usb-serial
handlers for the MDM6600 vendor id.
I have not spent time testing behavior in low-power-modes, it is likely I will
need to over-ride some of the generic handlers at that point.
Change-Id: I65fdd06c2764416f365995761aa653878c0e393b
Signed-off-by: Nick Pelly <npelly@google.com>
Rebecca Schultz Zavin [Wed, 11 Aug 2010 22:08:12 +0000 (15:08 -0700)]
leds: leds-lp8550: Remove early suspend/resume handler from this driver
Instead just allow userspace to turn on and off the backlight when
entering suspend. Otherwise we get a race condition on some hardware
where the backlight does not go off.
Change-Id: I81303125ebc0cfa8ef1d135a3681d6dd4d4137d9
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Tue, 10 Aug 2010 23:56:56 +0000 (16:56 -0700)]
[ARM] tegra: Add support for soc2030 camera sensor to stingray boardfiles
Change-Id: I2c83e3946a279aa9b963518ff6e600aad714276f
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Tue, 10 Aug 2010 23:49:45 +0000 (16:49 -0700)]
media: video: tegra: Driver for 2MP SOC2030 imager for use with tegra isp
Change-Id: I5ec72fd2a06c97c8cbf496d69fe2b03c1ef0941e
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Benoit Goby [Wed, 11 Aug 2010 01:10:01 +0000 (18:10 -0700)]
misc: Fix panic on suspend in TS27.010 Mux driver
Change-Id: I6af85425934961c65caf096f501f2356eac946fd
Signed-off-by: Benoit Goby <benoit@android.com>
Colin Cross [Wed, 11 Aug 2010 01:19:14 +0000 (18:19 -0700)]
[ARM] tegra: stingray: Enable LP1 suspend
Signed-off-by: Colin Cross <ccross@google.com>
Change-Id: I9a7fa0cf420f962599b05831fae3209dfe28b947
Colin Cross [Fri, 6 Aug 2010 21:50:00 +0000 (14:50 -0700)]
[ARM] tegra: stingray: Remove cruft from defconfig, add CROSS_COMPILE
Signed-off-by: Colin Cross <ccross@google.com>
Change-Id: I6b6a3be38a23f7cf09309bb326ce020ac4dc471a
Rebecca Schultz Zavin [Tue, 10 Aug 2010 23:55:43 +0000 (16:55 -0700)]
[ARM] tegra: Add pinmuxing for pin group dte to stingray board file
Change-Id: Ib8e30764c690a11e4962ed8c52d80225cd9f15fa
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Todd Poynor [Thu, 5 Aug 2010 03:25:59 +0000 (20:25 -0700)]
cpcap: suspend/resume
Disable cpcap interrupts at suspend and re-enable at resume, to avoid
processing interrupts while the SPI controller is suspended.
Change-Id: I26676b8ce8983bf5477f169a15d811c474c6f5a4
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Benoit Goby [Tue, 10 Aug 2010 01:00:04 +0000 (18:00 -0700)]
usb: serial: Fix memory corruption in moto-flashmdm
moto_flashmdm_attach should also override bulk_out_buffers as
usb-serial expects they have the same size as bulk_out_buffer
Change-Id: I97487fa833ed3dee40a15c485ba8565944d0f9e4
Signed-off-by: Benoit Goby <benoit@android.com>
Benoit Goby [Fri, 6 Aug 2010 19:24:59 +0000 (12:24 -0700)]
[ARM] tegra: stingray_defconfig: Enable USB_SERIAL_MOTO_FLASH_MODEM
Change-Id: Ib952e1296e34669389d2783f183ce8889b9b0e27
Signed-off-by: Benoit Goby <benoit@android.com>
makarand.karvekar [Fri, 6 Aug 2010 20:26:20 +0000 (15:26 -0500)]
touch: temporary fix for IC wake issue.
reset commented out in resume.
reset address pointer to message object.
adjusted wait time after reset upon recommendation from Atmel.
Change-Id: I0dd983ce0545c6ca2e48d4ed06b90d8c1ac1a390
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Jay Cheng [Fri, 6 Aug 2010 22:42:33 +0000 (18:42 -0400)]
[ARM] tegra: stingray: change UARTC clock source to PLL_P
Bluetooth requires 3Mpbs baud rate. Change UART clock source from
clk_m (
26000000) to pll_p (
216000000).
Signed-off-by: Jay Cheng <jacheng@nvidia.com>
Erik Gilling [Fri, 6 Aug 2010 21:56:35 +0000 (14:56 -0700)]
[ARM] add tegra dc and fb to stignray_defconfig
Signed-off-by: Erik Gilling <konkers@android.com>
Erik Gilling [Mon, 12 Jul 2010 00:11:06 +0000 (17:11 -0700)]
[ARM] tegra: move stingray-panel to new display system
Signed-off-by: Erik Gilling <konkers@android.com>
Nick Pelly [Fri, 6 Aug 2010 00:37:53 +0000 (17:37 -0700)]
[ARM] tegra: stingray: Enable TS MUX driver again.
No longer crashes due to fixes to mdm6600_modem
Change-Id: Ie5617b998d947cd7f2a55728e66e89a58b4fc96e
Signed-off-by: Nick Pelly <npelly@google.com>
Nick Pelly [Fri, 6 Aug 2010 00:35:17 +0000 (17:35 -0700)]
mdm6600_modem: fix crash on suspend in mdm6600_modem
This allow's Motorola's mdm6600_modem driver to work with suspend.
Patch provided by Motorola.
mdm6600_modem will shortly be replaced by a re-write, but its useful to commit
this update for easier A/B testing.
Change-Id: I0489f139e59e42ba1b6fb1979cf8b3ea8196a126
Signed-off-by: Nick Pelly <npelly@google.com>
Greg Meiste [Thu, 5 Aug 2010 15:38:12 +0000 (10:38 -0500)]
[ARM] tegra: stingray: Configure Charge LED
Configure GPIO_PZ5 to control the charge LED. For now, charge LEDs
are enabled when device is powered up. GPIO is also exported to
enable factory testing.
Change-Id: I6bf7345cc795d57c1312c2c14ab1c74863a421ce
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Thu, 5 Aug 2010 16:15:08 +0000 (11:15 -0500)]
power: ds2781: Check if charger already attached when probed
If Stingray is powered up with a charger already attached, the battery
driver would not report charging to the system, even though the battery
was being charged. This charges the DS2781 battery driver to check
if a charger is already present when the driver is probed.
Change-Id: I786e34a4699a545f5a03995db5df457cd7f63773
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Tue, 3 Aug 2010 20:41:22 +0000 (15:41 -0500)]
[ARM] tegra: stingray: Tegra w1 timing updates
Changes to the Tegra w1 timings to meet the timing requirements
of the DS2780 and DS2781 ICs as recommended by the hardware team.
Change-Id: I5dca589d98d87c16fac82759d02d42cd4afbc659
Signed-off-by: Greg Meiste <w30289@motorola.com>
makarand.karvekar [Mon, 2 Aug 2010 19:20:15 +0000 (14:20 -0500)]
misc: max9635: disable irq in suspend.
The device expects the irq to be disabled on resume, enable
it from suspend so enable/disables are balanced.
Change-Id: I62cf633819d8fdb3c5f7c6227f2625cfdecdc6a8
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Colin Cross [Wed, 4 Aug 2010 01:31:33 +0000 (18:31 -0700)]
[ARM] tegra: stingray: Update board file for i2c-tegra changes
The latest i2c-tegra driver requires more platform data to support
multiple i2c busses on a single controller.
Iliyan Malchev [Thu, 29 Jul 2010 21:13:10 +0000 (14:13 -0700)]
[ARM] tegra: stingray: configure CPCAP audio codec driver
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Thu, 29 Jul 2010 21:12:39 +0000 (14:12 -0700)]
[ARM] tegra: stingray: configure board for audio through i2s1
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Thu, 29 Jul 2010 21:09:06 +0000 (14:09 -0700)]
[ARM] tegra: stingray: platform driver for CPCAP audio codec
-- provides output-volume control
-- provides two output paths: speaker and headset
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Fri, 30 Jul 2010 19:50:23 +0000 (12:50 -0700)]
[ARM] tegra: add mach header to configure cpcap-audio
Signed-off-by: Iliyan Malchev <malchev@google.com>
Iliyan Malchev [Mon, 28 Jun 2010 22:29:40 +0000 (15:29 -0700)]
[ARM] tegra: stingray: configure audio-related clocks
Iliyan Malchev [Thu, 29 Jul 2010 21:08:42 +0000 (14:08 -0700)]
[ARM] public interface for CPCAP audio codec driver
Signed-off-by: Iliyan Malchev <malchev@google.com>
Colin Cross [Fri, 30 Jul 2010 19:16:30 +0000 (12:16 -0700)]
input: qtouch: Fix warning
Signed-off-by: Colin Cross <ccross@google.com>
Greg Meiste [Fri, 30 Jul 2010 15:42:36 +0000 (10:42 -0500)]
w1: Add support for DS2780 gas gauge
Stingray will initially ship with the DS2780 instead of the DS2781
gas gauge. The same DS2781 driver will work, but need to look for
the DS2780 family code.
Change-Id: I6b47f31d6362895839af4922210dba2aee41db42
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Thu, 29 Jul 2010 12:53:19 +0000 (07:53 -0500)]
[ARM] tegra: stingray: Reduce Tpdl time
The Tpdl time was too large, causing some batteries to not be
detected.
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Fri, 30 Jul 2010 14:28:56 +0000 (09:28 -0500)]
power: ds2781: Use correct value for Rsnsp
The current being reported by the DS2781 battery driver was off
due to the incorrect value being used for Rsnsp. The DS2781 has
a register with the correct value, so use it instead of a hard
coded value.
Change-Id: I6fbd32a2a890232a805a2d4f1e595b0b3daf30e8
Signed-off-by: Greg Meiste <w30289@motorola.com>
makarand.karvekar [Fri, 30 Jul 2010 03:23:38 +0000 (22:23 -0500)]
touch: remove duplicate register input device call
duplicate register input called, when boot work function is triggered
via firmware update process.
This broke reboot command.
Change-Id: I78547127bfbde39f1f971806156d332883b8bf43
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Benoit Goby [Thu, 29 Jul 2010 01:32:41 +0000 (18:32 -0700)]
[ARM] tegra: stingray: Configure the USB PHY as recommended by Motorola
Use ehci devices from devices.c
Change-Id: I4035b5e1ee06d5b2a561da0b1d4c0d8c55092a4d
Signed-off-by: Benoit Goby <benoit@android.com>
Rebecca Schultz Zavin [Thu, 29 Jul 2010 05:42:03 +0000 (22:42 -0700)]
media: video: tegra: ov5650: Remove log messages
Some sensor ioctls are called on every frame. Remove log messages
to prevent the kernel log from getting too spammy.
Change-Id: I0eb88eb7e7da7c5eb3e158c17ae68cca195147fc
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Wed, 28 Jul 2010 22:21:32 +0000 (15:21 -0700)]
[ARM] tegra: Add ov5650 camera sensor to stingray board file
Change-Id: I1b5277de2ed972ef2c7235e1c7d190273ff0e069
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Wed, 28 Jul 2010 22:20:15 +0000 (15:20 -0700)]
[ARM] tegra: Add tegra isp to stingray board files
Change-Id: I84eab4cb11a90cea7e43d63a571faffd022a5cda
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Thu, 29 Jul 2010 01:06:59 +0000 (18:06 -0700)]
[ARM] configs: Add ov5650 to stingray defconfig
Change-Id: Id0088aff7dc4f235965d834e153461f653772300
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Wed, 28 Jul 2010 22:18:51 +0000 (15:18 -0700)]
media: video: Add support for omnivision ov5650 for use with tegra isp
Change-Id: Ifb306ff6818d46fac26d7a1a9261a4cc67d729ca
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Rebecca Schultz Zavin [Wed, 28 Jul 2010 22:16:25 +0000 (15:16 -0700)]
media: video: Add stub isp driver for tegra
Change-Id: I6ff1bf0e72ef69b59d5875bd60c7cd825fa2ca4f
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Gary King [Wed, 21 Jul 2010 22:08:57 +0000 (15:08 -0700)]
[ARM] tegra: nvrm: add basic implementation of clock controls
add support for enabling, disabling and configuring the ISP, VI and
CSI clocks from user-space through the RM APIs
Change-Id: I652af05d5406928721ac62371b85cb3e2cbb3f6b
Signed-off-by: Gary King <gking@nvidia.com>
Gary King [Tue, 20 Jul 2010 21:29:27 +0000 (14:29 -0700)]
[ARM] tegra: add iram heap
AVP modules expect IRAM to be allocatable through nvmap, so the
IRAM heap needs to be created
Change-Id: Idd1bdccd5ff05ae655cb59780a89002a122055c9
Signed-off-by: Gary King <gking@nvidia.com>
Colin Cross [Thu, 29 Jul 2010 00:19:05 +0000 (17:19 -0700)]
Revert "[ARM] tegra: stingray: Disable DS2781 1w driver"
This reverts commit
3f399eda535217497ba911cbe94af04f7f2fb724.
Colin Cross [Wed, 28 Jul 2010 23:28:48 +0000 (16:28 -0700)]
HACK: stingray: Don't set the memory controller frequency
The latest stingray P1s die during boot when the memory
controller frequency is changed.
Change-Id: Ia505343289d7f6066d7731d2297c585988ffa7ea
Signed-off-by: Colin Cross <ccross@android.com>
Dmitry Shmidt [Wed, 28 Jul 2010 17:41:54 +0000 (10:41 -0700)]
[ARM] tegra: stingray: Fix path to bcm4329 Wifi calibration file
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Colin Cross [Wed, 28 Jul 2010 02:58:07 +0000 (19:58 -0700)]
[ARM] tegra: stingray: Disable ts27010 mux
The ts27010 mux driver panics during suspend, disable it
temporarily.
Change-Id: I0c858bf01d1579d38048288d1e19a373307600c2
Signed-off-by: Colin Cross <ccross@android.com>
makarand.karvekar [Tue, 27 Jul 2010 17:44:27 +0000 (12:44 -0500)]
[ARM] tegra: olympus: update touch object elements.
touch object elements updated as per firmware 09
protocol publication.
Change-Id: I1e3ce574859eaa25d8b46add055572ec4017855f
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
makarand.karvekar [Tue, 27 Jul 2010 17:44:27 +0000 (12:44 -0500)]
[ARM] tegra: stingray: update touch object elements.
touch object elements updated as per firmware 09
protocol publication.
Change-Id: I8fceb69b42b3234953dfd7aa35f01ead3f300ff6
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
makarand.karvekar [Tue, 27 Jul 2010 17:36:51 +0000 (12:36 -0500)]
touch: firmware 09 support
Added new objects grip, palm and Digitizer HID.
Ignoring info block checksum for now, issues seen
on some HW having incorrect info data.
Change-Id: I812d3099dd273e99a87ca3fe8dfce3bcdfbede7e
Signed-off-by: makarand.karvekar <makarand.karvekar@motorola.com>
Kazuhiro Ondo [Thu, 22 Jul 2010 16:57:32 +0000 (11:57 -0500)]
Motorola USB flash mode driver.
Change-Id: Idf72cbceeff56523be443013c5cbda79ea829994
Greg Meiste [Mon, 26 Jul 2010 19:39:57 +0000 (14:39 -0500)]
mfd: cpcap-irq: Add debugfs file for CPCAP IRQ data
This change will add the file cpcap-irq to the debug fs directory. The file will
provide data for each of the cpcap interrupts. The data includes the interrupt
name, if the interrupt is enabled/disabled, if a handler has been registered
with the interrupt, and the number of times the interrupt has been generated.
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Mon, 26 Jul 2010 19:02:18 +0000 (14:02 -0500)]
mfd: cpcap-irq: Short power button presses don't wake up
Fix for Issue
2866518: Short power button presses during suspend don't
wake up.
Signed-off-by: Greg Meiste <w30289@motorola.com>
Colin Cross [Fri, 23 Jul 2010 19:54:37 +0000 (12:54 -0700)]
usb: fsl_udc_core: Prevent udc timeout on suspend
Change-Id: Ic4780063d432860df835c54c17b2b9249132c8c5
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 27 Jul 2010 22:25:03 +0000 (15:25 -0700)]
[ARM] tegra: stingray: Disable LP1 suspend
Change-Id: Id345a12759425889bb295c8004daa4ccb7bfc812
Signed-off-by: Colin Cross <ccross@android.com>
Gary King [Fri, 25 Jun 2010 23:53:37 +0000 (16:53 -0700)]
tegra: stingray: initialize suspend platform data
configure the suspend platform data for stingray with conservative
values for the PMU timers, and specify LP1 (DRAM in self-refresh,
core voltage on) as the default suspend mode.
to configure LP2 (DRAM active, core voltage on) as the suspend mode,
set .dram_suspend = false in stingray_suspend.
Change-Id: Icf991f916a06a22b0878be0cc9790e7173d986db
Colin Cross [Tue, 27 Jul 2010 22:25:22 +0000 (15:25 -0700)]
[ARM] tegra: stingray: Disable DS2781 1w driver
Change-Id: Ib7a4da3370b988137f498783e1699814ad758aaa
Signed-off-by: Colin Cross <ccross@android.com>
Colin Cross [Tue, 20 Jul 2010 22:19:37 +0000 (15:19 -0700)]
[ARM] tegra: stingray: Fill out pinmux table from docs
Set all of the mux and tristate settings based on the stingray
documentation. Also uses TEGRA_MUX_SAFE for any pingroup that
is unused or used only for GPIOs.
Change-Id: Ifd022333a74e9415d1043c7c7b9ac324d3536ecf
Sergey Kudakov [Fri, 23 Jul 2010 17:07:26 +0000 (12:07 -0500)]
Corrections for usb platform data
Signed-off-by: Sergey Kudakov <sergey.kudakov@motorola.com>
Greg Meiste [Wed, 14 Jul 2010 15:46:20 +0000 (10:46 -0500)]
[ARM] tegra: stingray: Enable CPCAP uC SW2 control
Enable CORE_PWR_REQ from T20 and enable SW2 control in CPCAP.
Change-Id: I4b384f2a35a521ed0693dd8d490687025bf47151
Signed-off-by: Greg Meiste <w30289@motorola.com>
Greg Meiste [Wed, 14 Jul 2010 15:43:56 +0000 (10:43 -0500)]
firmware: cpcap: Support uC control of SW2
Update the CPCAP firmware to add support to control SW2. VDD_CORE is
connected to SW2, and therefore SW2 needs to be controlled by CORE_PWR_REQ.
Change-Id: I9526c7c14bd9c4d41d40800392ae814adae49c08
Signed-off-by: Greg Meiste <w30289@motorola.com>
Dmitry Shmidt [Mon, 26 Jul 2010 22:50:50 +0000 (15:50 -0700)]
[ARM] tegra: stingray: Add ram_console support (256K from top of memory)
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Dmitry Shmidt [Mon, 26 Jul 2010 22:23:07 +0000 (15:23 -0700)]
usb: otg: cpcap-otg: Fix section mismatch warning
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Nick Pelly [Thu, 22 Jul 2010 20:49:55 +0000 (13:49 -0700)]
[ARM] tegra: stingray: turn on USB_SERIAL
Change-Id: I13383a51376961f19af0b2155294dd9eb7fb01a7
Signed-off-by: Nick Pelly <npelly@google.com>
Kazuhiro Ondo [Tue, 20 Jul 2010 19:36:21 +0000 (14:36 -0500)]
msm6600_modem: Add TS27.010 MDM6600 modem driver.
Change-Id: Ide01d600124ade39544800cce35f09fd35918e27
Signed-off-by: Nick Pelly <npelly@google.com>