luowei [Wed, 4 Sep 2013 01:20:38 +0000 (09:20 +0800)]
sensors:update sensor driver version
luowei [Tue, 3 Sep 2013 11:34:30 +0000 (19:34 +0800)]
add angle caculation support between two gsensor
luowei [Tue, 3 Sep 2013 10:56:23 +0000 (18:56 +0800)]
add board id code for rk3188 sdk
luowei [Tue, 3 Sep 2013 10:47:51 +0000 (18:47 +0800)]
add board id to support OneImage solution
luowei [Tue, 3 Sep 2013 10:45:43 +0000 (18:45 +0800)]
add vendor and idb ioremap
chenxing [Fri, 30 Aug 2013 09:58:53 +0000 (17:58 +0800)]
rk3188: adjust leakage table && support Low freq add some voltage for low leakage chip
ywj [Fri, 30 Aug 2013 04:27:01 +0000 (12:27 +0800)]
support FactoryToolV4.0 in rk3028a,add mma8452 and LSM303D control
ywj [Fri, 30 Aug 2013 04:24:14 +0000 (12:24 +0800)]
add mma8452 and LSM303D control for FactoryV4.0 in rk3168
ywj [Fri, 30 Aug 2013 04:23:13 +0000 (12:23 +0800)]
add mma8452 and LSM303D control for FactoryV4.0
ywj [Fri, 30 Aug 2013 04:21:32 +0000 (12:21 +0800)]
add control for factoryV4.0 in rockchip_gslX680_rk3028.c and rk3026_codec.c
黄涛 [Fri, 30 Aug 2013 03:30:10 +0000 (11:30 +0800)]
rk: uncompress.h: add debug_uart.h and support timeout on putc
Cody Xie [Fri, 30 Aug 2013 03:01:32 +0000 (11:01 +0800)]
rk3188 ds1006h : board sync board-rk3168-tb.c
for 3188t : add dvfs_ddr_table_t by chenxing
commit
6d482ee8cebf59a99d45993faf08434319ee29eb
Author: chenxing <chenxing@rock-chips.com>
Date: Fri Jul 19 17:31:37 2013 +0800
rk3188: -t: fix ddr volt too low
陈金泉 [Fri, 30 Aug 2013 02:59:14 +0000 (10:59 +0800)]
rk616 codec: add control for modem incall pop noise
lintao [Fri, 30 Aug 2013 01:18:52 +0000 (09:18 +0800)]
wifi:esp8089 use sdmmc suspend
黄涛 [Thu, 29 Aug 2013 07:05:43 +0000 (15:05 +0800)]
rk: support dcache disable
黄涛 [Thu, 29 Aug 2013 01:48:59 +0000 (09:48 +0800)]
rk: cpufreq: interactive: adjust default value
luowei [Wed, 28 Aug 2013 08:54:02 +0000 (16:54 +0800)]
improve spi_test to support SPI0 and SPI1 test
kfx [Fri, 9 Aug 2013 09:00:37 +0000 (17:00 +0800)]
emmc: add kernel wr interface: rk_emmc_transfer
陈金泉 [Tue, 27 Aug 2013 10:26:28 +0000 (18:26 +0800)]
rk616_codec: add SPK/HP close before incall change
yj [Mon, 26 Aug 2013 09:02:46 +0000 (17:02 +0800)]
codec: 3026a & 3028 boost vol && tinyalsa template
张晴 [Mon, 26 Aug 2013 07:36:57 +0000 (15:36 +0800)]
rk3188:pmu:rt5025:debug the soc is not supply when resume
黄涛 [Mon, 26 Aug 2013 03:13:24 +0000 (11:13 +0800)]
rk3026: cpufreq: support thermal throttle
also bump version to 2.2
hjc [Mon, 26 Aug 2013 03:13:31 +0000 (11:13 +0800)]
rk3026_86v:
1.defconfig add support lowerpower warning;
2.fix backlight splash;
许盛飞 [Mon, 26 Aug 2013 02:59:08 +0000 (10:59 +0800)]
RK3026: when suspend ,disable USB UART Bypass Function
陈金泉 [Mon, 26 Aug 2013 02:38:55 +0000 (10:38 +0800)]
modem_sound: update modem_sound
libing [Mon, 26 Aug 2013 02:28:41 +0000 (10:28 +0800)]
rk616_mipi:add mipi lcd reset pin in the board 'board-rk3168-tb.c'
yj [Sat, 24 Aug 2013 10:01:12 +0000 (18:01 +0800)]
codec: 3026 support alsa
libing [Sat, 24 Aug 2013 08:23:01 +0000 (16:23 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
libing [Sat, 24 Aug 2013 08:17:47 +0000 (16:17 +0800)]
rk616_mipi: add mipi lcd reset pin in the board , and modify msleep err.
张晴 [Sat, 24 Aug 2013 08:17:34 +0000 (16:17 +0800)]
rk3188:pmu:rt5025:updata rt5025 drivers, modify some fg and charger bug
hjc [Sat, 24 Aug 2013 06:27:27 +0000 (14:27 +0800)]
rk3026_86v:
1.set arm and logic voltage 0.9v in suspend;
2.defconfig add support charge display;
许盛飞 [Sat, 24 Aug 2013 04:53:57 +0000 (12:53 +0800)]
rk3026:ARM and logic suspend-voltage = 900mV
typ [Sat, 24 Aug 2013 04:08:40 +0000 (12:08 +0800)]
RK3028A ddr:save sram capacity
许盛飞 [Sat, 24 Aug 2013 02:47:31 +0000 (10:47 +0800)]
battery: the battery for rk3026
hjc [Sat, 24 Aug 2013 02:18:36 +0000 (10:18 +0800)]
rk3188 lcdc: pull down hsync and vsync to prevent leakage in suspend
陈金泉 [Sat, 24 Aug 2013 01:45:38 +0000 (09:45 +0800)]
rk616_codec:add incall route support of tinyalsa, remove shutdown and startup
许盛飞 [Fri, 23 Aug 2013 12:48:08 +0000 (20:48 +0800)]
RK3026-86V: power optimization for VCCIO
黄涛 [Fri, 23 Aug 2013 10:41:01 +0000 (18:41 +0800)]
rk3026: reset: reduce call dsb for save sram space
ZHW [Fri, 23 Aug 2013 03:13:33 +0000 (11:13 +0800)]
lcdc: fix vertical screen machine insert hdmi screen flicker.
oyyf [Fri, 23 Aug 2013 03:11:43 +0000 (11:11 +0800)]
camera: modify generic_sensor.c make flash work everytime, generic vision: v0.1.c
hcy [Fri, 23 Aug 2013 03:12:48 +0000 (11:12 +0800)]
fix 2 CS bug
gy [Fri, 23 Aug 2013 02:13:01 +0000 (10:13 +0800)]
fix 3026's board file
1.change min_backlingt form 75 to 100
2.change arm's dvfs_tree
zhangjun [Fri, 23 Aug 2013 01:22:22 +0000 (09:22 +0800)]
Richtek5512 codec: fix DAPM error
typ [Thu, 22 Aug 2013 09:27:34 +0000 (17:27 +0800)]
RK3028A DDR:add 3028a/3026 ddr idle port
ddl [Thu, 22 Aug 2013 08:52:12 +0000 (16:52 +0800)]
camera: rk_cam_cif: v0.3.0x11
ddl [Thu, 22 Aug 2013 03:20:39 +0000 (11:20 +0800)]
camera: rk_cam_cif:v0.3.0x11 soc_camera:v0.1.1
ddl [Mon, 19 Aug 2013 03:58:26 +0000 (11:58 +0800)]
rk_cam_cif:v0.3.f rk_cam_io:v0.1.3 generic_sensor:v0.1.b
邱建斌 [Thu, 22 Aug 2013 08:44:20 +0000 (16:44 +0800)]
rk30 i2s: set i2s pin input when i2s into suspend
luowei [Thu, 22 Aug 2013 08:33:15 +0000 (16:33 +0800)]
add mma8653 support
陈金泉 [Wed, 21 Aug 2013 03:48:21 +0000 (11:48 +0800)]
es8323: change pcm format for incall
zhangjun [Wed, 21 Aug 2013 02:16:14 +0000 (10:16 +0800)]
rt5512 codec: add Richtek5512 support in RK3188_tb_sdk
gy [Tue, 20 Aug 2013 03:08:38 +0000 (11:08 +0800)]
support for battery
modified: arch/arm/configs/rk3026_86v_defconfig
modified: arch/arm/mach-rk3026/board-rk3026-86v.c
yj [Tue, 20 Aug 2013 12:03:16 +0000 (20:03 +0800)]
codec:k3026 & rk3028a disable alsa register && AMP delaytime
陈金泉 [Tue, 20 Aug 2013 09:47:08 +0000 (17:47 +0800)]
rk616 codec: open micbias1 for hook det, close AGC for capture
hjc [Tue, 20 Aug 2013 09:21:31 +0000 (17:21 +0800)]
rk3026_86v:
1.fix sdmmc card pwr_en config error;
2.fix lcd splash;
hjc [Tue, 20 Aug 2013 07:47:19 +0000 (15:47 +0800)]
rk3026_86v:
1.config lcd for new hardware;
2.fix camera lead to reboot;
3.modify arm/logic freq and voltage;
邱建斌 [Tue, 20 Aug 2013 03:29:28 +0000 (11:29 +0800)]
ak4396 rk3188 : add ak4396 in rk3188sdk board
邱建斌 [Tue, 20 Aug 2013 03:26:22 +0000 (11:26 +0800)]
ak4396: add ak4396 dac support
邱建斌 [Mon, 19 Aug 2013 02:26:02 +0000 (10:26 +0800)]
rt3261 && rt3224: init reg for playback add record
hwg [Tue, 20 Aug 2013 02:27:57 +0000 (10:27 +0800)]
set tcp_adv_win_scale back to 2 from 1:
solve GMS DRM network video download speed slow problem
ywj [Mon, 19 Aug 2013 09:31:47 +0000 (17:31 +0800)]
mend rk3168_rk616_86v_fac_defconfig for lose CONFIG_HDMI_RK616=y
yj [Fri, 16 Aug 2013 10:10:05 +0000 (18:10 +0800)]
codec:rk3028a & rk3026 agc reg error && delay_time
hjc [Fri, 16 Aug 2013 09:59:49 +0000 (17:59 +0800)]
rk3026_86v: fix sdmmc_det config error
luowei [Fri, 16 Aug 2013 09:42:33 +0000 (17:42 +0800)]
add ak8963 sample code
张晴 [Fri, 16 Aug 2013 09:32:25 +0000 (17:32 +0800)]
rk3026:pmu:tps65910:modify warning
wdc [Fri, 16 Aug 2013 09:27:38 +0000 (17:27 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
wdc [Fri, 16 Aug 2013 09:25:51 +0000 (17:25 +0800)]
codec: rt3224 supprot bluetooth_voip
cym [Fri, 16 Aug 2013 01:35:04 +0000 (09:35 +0800)]
RK30/RK31:remove "__sramlocalfunc" for ddr_get_bw().
hjc [Thu, 15 Aug 2013 08:46:15 +0000 (16:46 +0800)]
rk3026_86v: fix camera gsensor backlight error
hjc [Tue, 13 Aug 2013 04:04:05 +0000 (12:04 +0800)]
rk3026_86v: fix wifi open error and rk3028 camera error message
邱建斌 [Thu, 15 Aug 2013 08:07:31 +0000 (16:07 +0800)]
rk610 codec: fixed inside hdmi no sound
lyz [Thu, 15 Aug 2013 08:07:54 +0000 (16:07 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
张晴 [Thu, 15 Aug 2013 07:32:25 +0000 (15:32 +0800)]
rk3026:pmu:tps65910:modify vpll can be closed
oyyf [Thu, 15 Aug 2013 02:51:46 +0000 (10:51 +0800)]
camera: close cif_clk_out not denpend on modify clock name.
chenxing [Thu, 15 Aug 2013 02:16:18 +0000 (10:16 +0800)]
rk3026: aclk_vepu/aclk_vdpu init freq change to 400MHz
lyz [Wed, 14 Aug 2013 08:28:50 +0000 (16:28 +0800)]
usb: pcd: updata ep0 buffer address of multi-packet transfer
lyz [Wed, 14 Aug 2013 08:21:42 +0000 (16:21 +0800)]
usb: gadget: support full-speed isoc transfer
oyyf [Wed, 14 Aug 2013 07:00:59 +0000 (15:00 +0800)]
camera: when camera close, mclk can close
ywj [Wed, 14 Aug 2013 02:21:46 +0000 (10:21 +0800)]
support 3188 for factoryV4.0
ywj [Wed, 14 Aug 2013 02:06:33 +0000 (10:06 +0800)]
mend dislay bug on rk3168 and Compatible with 3188 for factoryV4.0
chenxing [Wed, 14 Aug 2013 01:30:44 +0000 (09:30 +0800)]
rk2928: rename cif_out_div as cif0_out_div, uniform camara code
gwl [Tue, 13 Aug 2013 05:14:12 +0000 (13:14 +0800)]
Only RK292x & RK3026_86V use pmu to control wifi power.
lyz [Tue, 13 Aug 2013 03:32:15 +0000 (11:32 +0800)]
rk3026: V86 not need OTG_DRV_VBUS mux GPIO3_C1 to GPIO
黄涛 [Mon, 12 Aug 2013 10:20:30 +0000 (18:20 +0800)]
rk3188/3066b/3026: default enable new emmc driver
gwl [Mon, 12 Aug 2013 10:02:53 +0000 (18:02 +0800)]
add RK3026 platform wifi power control by PMU.
hjc [Mon, 12 Aug 2013 09:32:22 +0000 (17:32 +0800)]
rk3026_86v: add defconfig add board file
wlf [Mon, 12 Aug 2013 10:01:48 +0000 (18:01 +0800)]
USB: Change EHCI INCR to INCR16 or INCR8 or INCR4 or SINGLE
lyz [Mon, 12 Aug 2013 02:52:08 +0000 (10:52 +0800)]
rk3026: V86 not need OTG_DRV_VBUS mux GPIO3_C1 to GPIO
张晴 [Mon, 12 Aug 2013 01:49:22 +0000 (09:49 +0800)]
rk3188:pmu:rt5025:modify power on error when plug adp or usb
张晴 [Mon, 12 Aug 2013 01:43:46 +0000 (09:43 +0800)]
rk3026:pmu:tps65910:support tps65910 for 3026_86v
hwg [Sat, 10 Aug 2013 08:32:04 +0000 (16:32 +0800)]
adjust vmac board functions to arch/arm/mach-rk30/board-rk31-sdk-vmac.c
cym [Sat, 10 Aug 2013 07:55:01 +0000 (15:55 +0800)]
RK3168/RK3188:add preread ddr_freq_t.screen_ft_us/t0 when define
DDR_CHANGE_FREQ_IN_LCDC_VSYNC,and add test_count maximum limit
chenxing [Sat, 10 Aug 2013 03:02:22 +0000 (11:02 +0800)]
rk3066B: fix ddr pll do not update msg in clock tree display
wlf [Sat, 10 Aug 2013 03:02:02 +0000 (11:02 +0800)]
Merge branch 'develop-3.0' of ssh://10.10.10.29/rk/kernel into develop-3.0
wlf [Sat, 10 Aug 2013 03:01:07 +0000 (11:01 +0800)]
USB: EHCI HCD (USB 2.0) support for rk3108/rk3168/rk3188
张晴 [Sat, 10 Aug 2013 02:28:23 +0000 (10:28 +0800)]
rk3188:pmu_rt5025:updata rt5025 drivers,modify some bug
chenxing [Sat, 10 Aug 2013 01:52:55 +0000 (09:52 +0800)]
rk3188: set init arm freq to 792M
chenxing [Sat, 10 Aug 2013 01:50:19 +0000 (09:50 +0800)]
rk30xx: add dvfs table auto adjust by leakage interface
张晴 [Fri, 9 Aug 2013 03:46:18 +0000 (11:46 +0800)]
rk3188:pmu-ricoh619:updata the drivers,modify some rtc and fg bug
hjc [Fri, 9 Aug 2013 02:25:03 +0000 (10:25 +0800)]
rk3028a_86v: defconfig add usb charge and gsensor ic gs_lsm303d