staging: r8712u: Add new USB ID

commit c7caf4d4c56aee40b995f5858ccf1c814f3d2da2 upstream.

Add USB ID for Sitecom WLA-2000 v1.001 WLAN.

Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fuse: fix fuse_retrieve

commit 48706d0a91583d08c56e7ef2a7602d99c8d4133f upstream.

Fix two bugs in fuse_retrieve():

 - retrieving more than one page would yield repeated instances of the
   first page

 - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the
   request page array would overflow

fuse_retrieve() was added in 2.6.36 and these bugs had been there since the
beginning.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: handle EOF correctly in ext4_bio_write_page()

commit 5a0dc7365c240795bf190766eba7a27600be3b3e upstream.

We need to zero out part of a page which beyond EOF before setting uptodate,
otherwise, mapread or write will see non-zero data beyond EOF.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize

commit 13a79a4741d37fda2fbafb953f0f301dc007928f upstream.

If there is an unwritten but clean buffer in a page and there is a
dirty buffer after the buffer, then mpage_submit_io does not write the
dirty buffer out.  As a result, da_writepages loops forever.

This patch fixes the problem by checking dirty flag.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: avoid hangs in ext4_da_should_update_i_disksize()

commit ea51d132dbf9b00063169c1159bee253d9649224 upstream.

If the pte mapping in generic_perform_write() is unmapped between
iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the
"copied" parameter to ->end_write can be zero. ext4 couldn't cope with
it with delayed allocations enabled. This skips the i_disksize
enlargement logic if copied is zero and no new data was appeneded to
the inode.

 gdb> bt
 #0  0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\
 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 #2  0xffffffff810d97f1 in generic_perform_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value o\
 ptimized out>, pos=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2440
 #3  generic_file_buffered_write (iocb=<value optimized out>, iov=<value optimized out>, nr_segs=<value optimized out>, p\
 os=0x108000, ppos=0xffff88001e26be40, count=<value optimized out>, written=0x0) at mm/filemap.c:2482
 #4  0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\
 xffff88001e26be40) at mm/filemap.c:2600
 #5  0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=<value optimi\
 zed out>, pos=<value optimized out>) at mm/filemap.c:2632
 #6  0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\
 t fs/ext4/file.c:136
 #7  0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=<value optimized out>, len=<value optimized out>, \
 ppos=0xffff88001e26bf48) at fs/read_write.c:406
 #8  0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x4\
 000, pos=0xffff88001e26bf48) at fs/read_write.c:435
 #9  0xffffffff8113816c in sys_write (fd=<value optimized out>, buf=0x1ec2960 <Address 0x1ec2960 out of bounds>, count=0x\
 4000) at fs/read_write.c:487
 #10 <signal handler called>
 #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ ()
 #12 0x0000000000000000 in ?? ()
 gdb> print offset
 $22 = 0xffffffffffffffff
 gdb> print idx
 $23 = 0xffffffff
 gdb> print inode->i_blkbits
 $24 = 0xc
 gdb> up
 #1  ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\
 xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512
 2512                    if (ext4_da_should_update_i_disksize(page, end)) {
 gdb> print start
 $25 = 0x0
 gdb> print end
 $26 = 0xffffffffffffffff
 gdb> print pos
 $27 = 0x108000
 gdb> print new_i_size
 $28 = 0x108000
 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize
 $29 = 0xd9000
 gdb> down
 2467            for (i = 0; i < idx; i++)
 gdb> print i
 $30 = 0xd44acbee

This is 100% reproducible with some autonuma development code tuned in
a very aggressive manner (not normal way even for knumad) which does
"exotic" changes to the ptes. It wouldn't normally trigger but I don't
see why it can't happen normally if the page is added to swap cache in
between the two faults leading to "copied" being zero (which then
hangs in ext4). So it should be fixed. Especially possible with lumpy
reclaim (albeit disabled if compaction is enabled) as that would
ignore the young bits in the ptes.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ext4: display the correct mount option in /proc/mounts for [no]init_itable

commit fc6cb1cda5db7b2d24bf32890826214b857c728e upstream.

/proc/mounts was showing the mount option [no]init_inode_table when
the correct mount option that will be accepted by parse_options() is
[no]init_itable.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xen: only limit memory map to maximum reservation for domain 0.

commit d3db728125c4470a2d061ac10fa7395e18237263 upstream.

d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM"
clamped the total amount of RAM to the current maximum reservation. This is
correct for dom0 but is not correct for guest domains. In order to boot a guest
"pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for
future memory expansion the guest must derive max_pfn from the e820 provided by
the toolstack and not the current maximum reservation (which can reflect only
the current maximum, not the guest lifetime max). The existing algorithm
already behaves this correctly if we do not artificially limit the maximum
number of pages for the guest case.

For a guest booted with maxmem=512, memory=128 this results in:
 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
 [    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
-[    0.000000]  Xen: 0000000000100000 - 0000000008100000 (usable)
-[    0.000000]  Xen: 0000000008100000 - 0000000020800000 (unusable)
+[    0.000000]  Xen: 0000000000100000 - 0000000020800000 (usable)
...
 [    0.000000] NX (Execute Disable) protection: active
 [    0.000000] DMI not present or invalid.
 [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
 [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
-[    0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000
+[    0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000
 [    0.000000] initial memory mapped : 0 - 027ff000
 [    0.000000] Base memory trampoline at [c009f000] 9f000 size 4096
-[    0.000000] init_memory_mapping: 0000000000000000-0000000008100000
-[    0.000000]  0000000000 - 0008100000 page 4k
-[    0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000
+[    0.000000] init_memory_mapping: 0000000000000000-0000000020800000
+[    0.000000]  0000000000 - 0020800000 page 4k
+[    0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000
 [    0.000000] xen: setting RW the range 27e8000 - 27ff000
 [    0.000000] 0MB HIGHMEM available.
-[    0.000000] 129MB LOWMEM available.
-[    0.000000]   mapped low ram: 0 - 08100000
-[    0.000000]   low ram: 0 - 08100000
+[    0.000000] 520MB LOWMEM available.
+[    0.000000]   mapped low ram: 0 - 20800000
+[    0.000000]   low ram: 0 - 20800000

With this change "xl mem-set <domain> 512M" will successfully increase the
guest RAM (by reducing the balloon).

There is no change for dom0.

Reported-and-Tested-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

md/raid5: fix bug that could result in reads from a failed device.

commit 355840e7a7e56bb2834fd3b0da64da5465f8aeaa upstream.

commit a847627709b3402163d99f7c6fda4a77bcd6b51b in linux-3.0.9
attempted to backport this to 3.0 but only made one change were two
were necessary.  This add the second change.

This bug was introduced in 415e72d034c50520ddb7ff79e7d1792c1306f0c9
which was in 2.6.36.

There is a small window of time between when a device fails and when
it is removed from the array.  During this time we might still read
from it, but we won't write to it - so it is possible that we could
read stale data.

We didn't need the test of 'Faulty' before because the test on
In_sync is sufficient.  Since we started allowing reads from the early
part of non-In_sync devices we need a test on Faulty too.

This is suitable for any kernel from 2.6.36 onwards, though the patch
might need a bit of tweaking in 3.0 and earlier.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: avoid synchronous transactions when deleting attr blocks

commit 859f57ca00805e6c482eef1a7ab073097d02c8ca upstream.

[slightly different from the upstream version because of a previous cleanup]

Currently xfs_attr_inactive causes a synchronous transactions if we are
removing a file that has any extents allocated to the attribute fork, and
thus makes XFS extremely slow at removing files with out of line extended
attributes. The code looks a like a relict from the days before the busy
extent list, but with the busy extent list we avoid reusing data and attr
extents that have been freed but not commited yet, so this code is just
as superflous as the synchronous transactions for data blocks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels

commit c29f7d457ac63311feb11928a866efd2fe153d74 upstream.

The i_ino field in the VFS inode is of type unsigned long and thus can't
hold the full 64-bit inode number on 32-bit kernels.  We have the full
inode number in the XFS inode, so use that one for nfs exports.  Note
that I've also switched the 32-bit file handles types to it, just to make
the code more consistent and copy & paste errors less likely to happen.

Reported-by: Guoquan Yang <ygq51@hotmail.com>
Reported-by: Hank Peng <pengxihan@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (coretemp) Fix oops on CPU offlining

This is for stable kernel branch 3.0 only. Previous and later versions
have different code paths and are not affected by this bug.

This is the same fix as "hwmon: (coretemp) Fix oops on driver load"
but for the CPU offlining case. Sorry for missing it at first.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hfs: fix hfs_find_init() sb->ext_tree NULL ptr oops

commit 434a964daa14b9db083ce20404a4a2add54d037a upstream.

Clement Lecigne reports a filesystem which causes a kernel oops in
hfs_find_init() trying to dereference sb->ext_tree which is NULL.

This proves to be because the filesystem has a corrupted MDB extent
record, where the extents file does not fit into the first three extents
in the file record (the first blocks).

In hfs_get_block() when looking up the blocks for the extent file
(HFS_EXT_CNID), it fails the first blocks special case, and falls
through to the extent code (which ultimately calls hfs_find_init())
which is in the process of being initialised.

Hfs avoids this scenario by always having the extents b-tree fitting
into the first blocks (the extents B-tree can't have overflow extents).

The fix is to check at mount time that the B-tree fits into first
blocks, i.e.  fail if HFS_I(inode)->alloc_blocks >=
HFS_I(inode)->first_blocks

Note, the existing commit 47f365eb57573 ("hfs: fix oops on mount with
corrupted btree extent records") becomes subsumed into this as a special
case, but only for the extents B-tree (HFS_EXT_CNID), it is perfectly
acceptable for the catalog B-Tree file to grow beyond three extents,
with the remaining extent descriptors in the extents overfow.

This fixes CVE-2011-2203

Reported-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Phillip Lougher <plougher@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Moritz Mühlenhoff <jmm@inutil.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Make TASKSTATS require root access

commit 1a51410abe7d0ee4b1d112780f46df87d3621043 upstream.

Ok, this isn't optimal, since it means that 'iotop' needs admin
capabilities, and we may have to work on this some more.  But at the
same time it is very much not acceptable to let anybody just read
anybody elses IO statistics quite at this level.

Use of the GENL_ADMIN_PERM suggested by Johannes Berg as an alternative
to checking the capabilities by hand.

Reported-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Moritz Mühlenhoff <jmm@inutil.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

jbd/jbd2: validate sb->s_first in journal_get_superblock()

commit 8762202dd0d6e46854f786bdb6fb3780a1625efe upstream.

I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when
mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3
image has s_first = 0 in journal superblock, and the 0 is passed to
journal->j_head in journal_reset(), then to blocknr in
cleanup_journal_tail(), in the end the J_ASSERT failed.

So validate s_first after reading journal superblock from disk in
journal_get_superblock() to ensure s_first is valid.

The following script could reproduce it:

fstype=ext3
blocksize=1024
img=$fstype.img
offset=0
found=0
magic="c0 3b 39 98"

dd if=/dev/zero of=$img bs=1M count=8
mkfs -t $fstype -b $blocksize -F $img
filesize=`stat -c %s $img`
while [ $offset -lt $filesize ]
do
        if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then
                echo "Found journal: $offset"
                found=1
                break
        fi
        offset=`echo "$offset+$blocksize" | bc`
done

if [ $found -ne 1 ];then
        echo "Magic \"$magic\" not found"
        exit 1
fi

dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1

mkdir -p ./mnt
mount -o loop $img ./mnt

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Moritz Mühlenhoff <jmm@inutil.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked

commit 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 upstream.

When HPET is operating in RTC mode, the TN_ENABLE bit on timer1
controls whether the HPET or the RTC delivers interrupts to irq8. When
the system goes into suspend, the RTC driver sends a signal to the
HPET driver so that the HPET releases control of irq8, allowing the
RTC to wake the system from suspend. The switchover is accomplished by
a write to the HPET configuration registers which currently only
occurs while servicing the HPET interrupt.

On some systems, I have seen the system suspend before an HPET
interrupt occurs, preventing the write to the HPET configuration
register and leaving the HPET in control of the irq8. As the HPET is
not active during suspend, it does not generate a wake signal and RTC
alarms do not work.

This patch forces the HPET driver to immediately transfer control of
the irq8 channel to the RTC instead of waiting until the next
interrupt event.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mmc: mxcmmc: fix falling back to PIO

commit e58f516ff4730c4047c3f104b061f7a03e9a263c upstream.

When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (jz4740) fix signedness bug

commit 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 upstream.

wait_for_completion_interruptible_timeout() may return negative value.
In this case, checking if (t > 0)  will return true if t is unsigned.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

linux/log2.h: Fix rounddown_pow_of_two(1)

commit 13c07b0286d340275f2d97adf085cecda37ede37 upstream.

Exactly like roundup_pow_of_two(1), the rounddown version was buggy for
the case of a compile-time constant '1' argument.  Probably because it
originated from the same code, sharing history with the roundup version
from before the bugfix (for that one, see commit 1a06a52ee1b0: "Fix
roundup_pow_of_two(1)").

However, unlike the roundup version, the fix for rounddown is to just
remove the broken special case entirely.  It's simply not needed - the
generic code

    1UL << ilog2(n)

does the right thing for the constant '1' argment too.  The only reason
roundup needed that special case was because rounding up does so by
subtracting one from the argument (and then adding one to the result)
causing the obvious problems with "ilog2(0)".

But rounddown doesn't do any of that, since ilog2() naturally truncates
(ie "rounds down") to the right rounded down value.  And without the
ilog2(0) case, there's no reason for the special case that had the wrong
value.

tl;dr: rounddown_pow_of_two(1) should be 1, not 0.

Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mac80211: fix race condition caused by late addBA response

Upstream commit d305a6557b2c4dca0110f05ffe745b1ef94adb80.

If addBA responses comes in just after addba_resp_timer has
expired mac80211 will still accept it and try to open the
aggregation session. This causes drivers to be confused and
in some cases even crash.

This patch fixes the race condition and makes sure that if
addba_resp_timer has expired addBA response is not longer
accepted and we do not try to open half-closed session.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
[some adjustments]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

iwlwifi: do not re-configure HT40 after associated

commit 34a5b4b6af104cf18eb50748509528b9bdbc4036 upstream.

The ht40 setting should not change after association unless channel switch

This fix a problem we are seeing which cause uCode assert because driver
sending invalid information and make uCode confuse

Here is the firmware assert message:
kernel: iwlagn 0000:03:00.0: Microcode SW error detected.  Restarting 0x82000000.
kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301
kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump:
kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6
kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT
kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc
kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1
kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2
kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1
kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2
kernel: iwlagn 0000:03:00.0: 0x01008035 | data1
kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2
kernel: iwlagn 0000:03:00.0: 0x000005A7 | line
kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time
kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low
kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi
kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1
kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2
kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3
kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version
kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version
kernel: iwlagn 0000:03:00.0: 0x00480303 | board version
kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd
kernel: iwlagn 0000:03:00.0: CSR values:
kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
kernel: iwlagn 0000:03:00.0:        CSR_HW_IF_CONFIG_REG: 0X00480303
kernel: iwlagn 0000:03:00.0:          CSR_INT_COALESCING: 0X0000ff40
kernel: iwlagn 0000:03:00.0:                     CSR_INT: 0X00000000
kernel: iwlagn 0000:03:00.0:                CSR_INT_MASK: 0X00000000
kernel: iwlagn 0000:03:00.0:           CSR_FH_INT_STATUS: 0X00000000
kernel: iwlagn 0000:03:00.0:                 CSR_GPIO_IN: 0X00000030
kernel: iwlagn 0000:03:00.0:                   CSR_RESET: 0X00000000
kernel: iwlagn 0000:03:00.0:                CSR_GP_CNTRL: 0X080403c5
kernel: iwlagn 0000:03:00.0:                  CSR_HW_REV: 0X000000b0
kernel: iwlagn 0000:03:00.0:              CSR_EEPROM_REG: 0X07d60ffd
kernel: iwlagn 0000:03:00.0:               CSR_EEPROM_GP: 0X90000001
kernel: iwlagn 0000:03:00.0:              CSR_OTP_GP_REG: 0X00030001
kernel: iwlagn 0000:03:00.0:                 CSR_GIO_REG: 0X00080044
kernel: iwlagn 0000:03:00.0:            CSR_GP_UCODE_REG: 0X000093bb
kernel: iwlagn 0000:03:00.0:           CSR_GP_DRIVER_REG: 0X00000000
kernel: iwlagn 0000:03:00.0:           CSR_UCODE_DRV_GP1: 0X00000000
kernel: iwlagn 0000:03:00.0:           CSR_UCODE_DRV_GP2: 0X00000000
kernel: iwlagn 0000:03:00.0:                 CSR_LED_REG: 0X00000078
kernel: iwlagn 0000:03:00.0:        CSR_DRAM_INT_TBL_REG: 0X88214dd2
kernel: iwlagn 0000:03:00.0:        CSR_GIO_CHICKEN_BITS: 0X27800200
kernel: iwlagn 0000:03:00.0:             CSR_ANA_PLL_CFG: 0X00000000
kernel: iwlagn 0000:03:00.0:           CSR_HW_REV_WA_REG: 0X0001001a
kernel: iwlagn 0000:03:00.0:        CSR_DBG_HPET_MEM_REG: 0Xffff0010
kernel: iwlagn 0000:03:00.0: FH register values:
kernel: iwlagn 0000:03:00.0:         FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00
kernel: iwlagn 0000:03:00.0:        FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0
kernel: iwlagn 0000:03:00.0:                  FH_RSCSR_CHNL0_WPTR: 0X00000060
kernel: iwlagn 0000:03:00.0:         FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104
kernel: iwlagn 0000:03:00.0:          FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
kernel: iwlagn 0000:03:00.0:            FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
kernel: iwlagn 0000:03:00.0:    FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
kernel: iwlagn 0000:03:00.0:                FH_TSSR_TX_STATUS_REG: 0X07ff0001
kernel: iwlagn 0000:03:00.0:                 FH_TSSR_TX_ERROR_REG: 0X00000000
kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
kernel: ------------[ cut here ]------------
WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407()
kernel: Hardware name: 4290W4H
kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2
kernel: Call Trace:
kernel:  [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87
kernel:  [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407
kernel:  [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32
kernel:  [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87
kernel:  [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3
kernel:  [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a
kernel:  [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b
kernel:  [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b
kernel:  [<ffffffff8104ba97>] ? kthread+0x7a/0x82
kernel:  [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10
kernel:  [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11
kernel:  [<ffffffff813d21b0>] ? gs_change+0xb/0xb

Reported-by: Udo Steinberg <udo@hypervisor.org>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

percpu: fix chunk range calculation

commit a855b84c3d8c73220d4d3cd392a7bee7c83de70e upstream.

Percpu allocator recorded the cpus which map to the first and last
units in pcpu_first/last_unit_cpu respectively and used them to
determine the address range of a chunk - e.g. it assumed that the
first unit has the lowest address in a chunk while the last unit has
the highest address.

This simply isn't true.  Groups in a chunk can have arbitrary positive
or negative offsets from the previous one and there is no guarantee
that the first unit occupies the lowest offset while the last one the
highest.

Fix it by actually comparing unit offsets to determine cpus occupying
the lowest and highest offsets.  Also, rename pcu_first/last_unit_cpu
to pcpu_low/high_unit_cpu to avoid confusion.

The chunk address range is used to flush cache on vmalloc area
map/unmap and decide whether a given address is in the first chunk by
per_cpu_ptr_to_phys() and the bug was discovered by invalid
per_cpu_ptr_to_phys() translation for crash_note.

Kudos to Dave Young for tracking down the problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: WANG Cong <xiyou.wangcong@gmail.com>
Reported-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
LKML-Reference: <4EC21F67.10905@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

intel-iommu: fix superpage support in pfn_to_dma_pte()

commit 4399c8bf2b9093696fa8160d79712e7346989c46 upstream.

If target_level == 0, current code breaks out of the while-loop if
SUPERPAGE bit is set. We should also break out if PTE is not present.
If we don't do this, KVM calls to iommu_iova_to_phys() will cause
pfn_to_dma_pte() to create mapping for 4KiB pages.

Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

intel-iommu: set iommu_superpage on VM domains to lowest common denominator

commit 8140a95d228efbcd64d84150e794761a32463947 upstream.

set dmar->iommu_superpage field to the smallest common denominator
of super page sizes supported by all active VT-d engines.  Initialize
this field in intel_iommu_domain_init() API so intel_iommu_map() API
will be able to use iommu_superpage field to determine the appropriate
super page size to use.

Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

intel-iommu: fix return value of iommu_unmap() API

commit 292827cb164ad00cc7689a21283b1261c0b6daed upstream.

iommu_unmap() API expects IOMMU drivers to return the actual page order
of the address being unmapped.  Previous code was just returning page
order passed in from the caller.  This patch fixes this problem.

Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

target: Handle 0 correctly in transport_get_sectors_6()

commit 9b5cd7f37e1e018432111333e2a67f78ba41edfe upstream.

SBC-3 says:

    A TRANSFER LENGTH field set to zero specifies that 256 logical
    blocks shall be written.  Any other value specifies the number
    of logical blocks that shall be written.

The old code was always just returning the value in the TRANSFER LENGTH
byte.  Fix this to return 256 if the byte is 0.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API

commit 02125a826459a6ad142f8d91c5b6357562f96615 upstream.

__d_path() API is asking for trouble and in case of apparmor d_namespace_path()
getting just that.  The root cause is that when __d_path() misses the root
it had been told to look for, it stores the location of the most remote ancestor
in *root.  Without grabbing references.  Sure, at the moment of call it had
been pinned down by what we have in *path.  And if we raced with umount -l, we
could have very well stopped at vfsmount/dentry that got freed as soon as
prepend_path() dropped vfsmount_lock.

It is safe to compare these pointers with pre-existing (and known to be still
alive) vfsmount and dentry, as long as all we are asking is "is it the same
address?".  Dereferencing is not safe and apparmor ended up stepping into
that.  d_namespace_path() really wants to examine the place where we stopped,
even if it's not connected to our namespace.  As the result, it looked
at ->d_sb->s_magic of a dentry that might've been already freed by that point.
All other callers had been careful enough to avoid that, but it's really
a bad interface - it invites that kind of trouble.

The fix is fairly straightforward, even though it's bigger than I'd like:
* prepend_path() root argument becomes const.
* __d_path() is never called with NULL/NULL root.  It was a kludge
to start with.  Instead, we have an explicit function - d_absolute_root().
Same as __d_path(), except that it doesn't get root passed and stops where
it stops.  apparmor and tomoyo are using it.
* __d_path() returns NULL on path outside of root.  The main
caller is show_mountinfo() and that's precisely what we pass root for - to
skip those outside chroot jail.  Those who don't want that can (and do)
use d_path().
* __d_path() root argument becomes const.  Everyone agrees, I hope.
* apparmor does *NOT* try to use __d_path() or any of its variants
when it sees that path->mnt is an internal vfsmount.  In that case it's
definitely not mounted anywhere and dentry_path() is exactly what we want
there.  Handling of sysctl()-triggered weirdness is moved to that place.
* if apparmor is asked to do pathname relative to chroot jail
and __d_path() tells it we it's not in that jail, the sucker just calls
d_absolute_path() instead.  That's the other remaining caller of __d_path(),
BTW.
        * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway -
the normal seq_file logics will take care of growing the buffer and redoing
the call of ->show() just fine).  However, if it gets path not reachable
from root, it returns SEQ_SKIP.  The only caller adjusted (i.e. stopped
ignoring the return value as it used to do).

Reviewed-by: John Johansen <john.johansen@canonical.com>
ACKed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mm: vmalloc: check for page allocation failure before vmlist insertion

commit 1368edf0647ac112d8cfa6ce47257dc950c50f5c upstream.

Commit f5252e00 ("mm: avoid null pointer access in vm_struct via
/proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after
it is fully initialised.  Unfortunately, it did not check that
__vmalloc_area_node() successfully populated the area.  In the event of
allocation failure, the vmalloc area is freed but the pointer to freed
memory is inserted into the vmlist leading to a a crash later in
get_vmalloc_info().

This patch adds a check for ____vmalloc_area_node() failure within
__vmalloc_node_range.  It does not use "goto fail" as in the previous
error path as a warning was already displayed by __vmalloc_area_node()
before it called vfree in its failure path.

Credit goes to Luciano Chavez for doing all the real work of identifying
exactly where the problem was.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Tested-by: Luciano Chavez <lnx1138@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks

commit d021563888312018ca65681096f62e36c20e63cc upstream.

setup_zone_migrate_reserve() expects that zone->start_pfn starts at
pageblock_nr_pages aligned pfn otherwise we could access beyond an
existing memblock resulting in the following panic if
CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid:

  IP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180
  *pdpt = 0000000000000000 *pde = f000ff53f000ff53
  Oops: 0000 [#1] SMP
  Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
  EIP: 0060:[<c02d331d>] EFLAGS: 00010006 CPU: 0
  EIP is at setup_zone_migrate_reserve+0xcd/0x180
  EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000
  ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58
  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000)
  Call Trace:
  [<c02d389c>] __setup_per_zone_wmarks+0xec/0x160
  [<c02d3a1f>] setup_per_zone_wmarks+0xf/0x20
  [<c08a771c>] init_per_zone_wmark_min+0x27/0x86
  [<c020111b>] do_one_initcall+0x2b/0x160
  [<c086639d>] kernel_init+0xbe/0x157
  [<c05cae26>] kernel_thread_helper+0x6/0xd
  Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f
  EIP: [<c02d331d>] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58
  CR2: 00000000000012b4

We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because
highstart_pfn = 0x36ffe.

The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page
in a pageblock is reserved before marking it MIGRATE_RESERVE").

Make sure that start_pfn is always aligned to pageblock_nr_pages to
ensure that pfn_valid s always called at the start of each pageblock.
Architectures with holes in pageblocks will be correctly handled by
pfn_valid_within in pageblock_is_reserved.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Dang Bo <bdang@vmware.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Arve Hjnnevg <arve@android.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ptp: Fix clock_getres() implementation

commit d68fb11c3dae75c8331538dcf083a65e697cc034 upstream.

The clock_getres() function must return the resolution in the timespec
argument and return 0 for success.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thp: set compound tail page _count to zero

commit 58a84aa92723d1ac3e1cc4e3b0ff49291663f7e1 upstream.

Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all
page_tail->_count zero at all times.  But the current kernel does not
set page_tail->_count to zero if a 1GB page is utilized.  So when an
IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a
tail page's _count does not equal zero.

  kernel BUG at include/linux/mm.h:386!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    gup_pud_range+0xb8/0x19d
    get_user_pages_fast+0xcb/0x192
    ? trace_hardirqs_off+0xd/0xf
    hva_to_pfn+0x119/0x2f2
    gfn_to_pfn_memslot+0x2c/0x2e
    kvm_iommu_map_pages+0xfd/0x1c1
    kvm_iommu_map_memslots+0x7c/0xbd
    kvm_iommu_map_guest+0xaa/0xbf
    kvm_vm_ioctl_assigned_device+0x2ef/0xa47
    kvm_vm_ioctl+0x36c/0x3a2
    do_vfs_ioctl+0x49e/0x4e4
    sys_ioctl+0x5a/0x7c
    system_call_fastpath+0x16/0x1b
  RIP  gup_huge_pud+0xf2/0x159

Signed-off-by: Youquan Song <youquan.song@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

thp: add compound tail page _mapcount when mapped

commit b6999b19120931ede364fa3b685e698a61fed31d upstream.

With the 3.2-rc kernel, IOMMU 2M pages in KVM works.  But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.

The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd.  If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.

So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.

This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.

Reproduce like:
1. Add grub boot option: hugepagesz=1G hugepages=8
2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages
3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages
-net none -device pci-assign,host=07:00.1

  kernel BUG at mm/swap.c:114!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    put_page+0x15/0x37
    kvm_release_pfn_clean+0x31/0x36
    kvm_iommu_put_pages+0x94/0xb1
    kvm_iommu_unmap_memslots+0x80/0xb6
    kvm_assign_device+0xba/0x117
    kvm_vm_ioctl_assigned_device+0x301/0xa47
    kvm_vm_ioctl+0x36c/0x3a2
    do_vfs_ioctl+0x49e/0x4e4
    sys_ioctl+0x5a/0x7c
    system_call_fastpath+0x16/0x1b
  RIP  put_compound_page+0xd4/0x168

Signed-off-by: Youquan Song <youquan.song@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fs/proc/meminfo.c: fix compilation error

commit b53fc7c2974a50913f49e1d800fe904a28c338e3 upstream.

Fix the error message "directives may not be used inside a macro argument"
which appears when the kernel is compiled for the cris architecture.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ASoC: Provide a more complete DMA driver stub

commit cefcc03ffc9527dde56807339edb1719c8dbae5f upstream.

Allow userspace applications to do more parameter setting by providing a
more complete stub DMA driver specifying a wildcard set of formats and
channels and essentially random values for the DMA parameters. This is
required for useful runtime operation of the dummy DMA driver until we
are able to figure out how to power up links and do hw_params() from DAPM.

Sending to stable as without this the dummy driver is not terribly
useful.

Reported-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com>
Tested-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode

commit 83713fc9373be2e943f82e9d36213708c6b0050e upstream.

The function setup_vpif_input_channel_mode() used the VSCLKDIS register
instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0
used a different clock from channel 1.

Clearly a copy-and-paste error.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20

commit 1808958d27b1250295f01dff4997d8a8814adaab upstream.

The conid is supposed to be t0/t1/t2_clk.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arm: mx23: recognise stmp378x as mx23

commit 11357be9246c7d1acf9b37ad54a18b29bbb734be upstream.

Adding the machine_is_* line was forgotten when converting mach-stmp378x to
mach-mxs.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0

commit f1b21c525693b0159aed83b5871f2d0f077f208e upstream.

On OMAP-L138 platform, EDMA event queue 0 should be used for audio
transfers so that they are not starved by video data moving on event queue 1.

Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform
data define edma queue numbers) had a side-effect of changing this behavior
by making the driver actually honor the platform data passed.

Fix this now by passing event queue 0 as the queue to be used for audio
transfers.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

alarmtimers: Fix time comparison

commit c9c024b3f3e07d087974db4c0dc46217fff3a6c0 upstream.

The expiry function compares the timer against current time and does
not expire the timer when the expiry time is >= now. That's wrong. If
the timer is set for now, then it must expire.

Make the condition expiry > now for breaking out the loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: hda/realtek - Fix Oops in alc_mux_select()

commit cce4aa378a049f4275416ee6302dd24f37b289df upstream.

When no imux is available (e.g. a single capture source),
alc_auto_init_input_src() may trigger an Oops due to the access to -1.
Add a proper zero-check to avoid it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ALSA: sis7019 - give slow codecs more time to reset

commit fc084e0b930d546872ab23667052499f7daf0fed upstream.

There are some AC97 codec and board combinations that have been observed
to take a very long time to respond after the cold reset has completed.
In one case, more than 350 ms was required. To allow users to have sound
on those platforms, we'll wait up to 500ms for the codec to become
ready.

As a board may have multiple codecs, with some faster than others to
reset, we add a module parameter to inform the driver which codecs
should be present.

Reported-by: KotCzarny <tjosko@yahoo.com>
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linux 3.0.13

clockevents: Set noop handler in clockevents_exchange_device()

commit de28f25e8244c7353abed8de0c7792f5f883588c upstream.

If a device is shutdown, then there might be a pending interrupt,
which will be processed after we reenable interrupts, which causes the
original handler to be run. If the old handler is the (broadcast)
periodic handler the shutdown state might hang the kernel completely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

clocksource: Fix bug with max_deferment margin calculation

commit b1f919664d04a8d0ba29cb76673c7ca3325a2006 upstream.

In order to leave a margin of 12.5% we should >> 3 not >> 5.

Signed-off-by: Yang Honggang (Joseph) <eagle.rtlinux@gmail.com>
[jstultz: Modified commit subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

oprofile: Fix crash when unloading module (hr timer mode)

commit 87121ca504fd1d963a66b3fb0c72054b0fd9a177 upstream.

Oprofile may crash in a KVM guest while unlaoding modules. This
happens if oprofile_arch_init() fails and oprofile switches to the hr
timer mode as a fallback. In this case oprofile_arch_exit() is called,
but it never was initialized properly which causes the crash. This
patch fixes this.

oprofile: using timer interrupt.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
PGD 41da3f067 PUD 41d80e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
CPU 5
Modules linked in: oprofile(-)

Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<ffffffff8123c226>]  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
RSP: 0018:ffff88041de1de98  EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200
RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620
RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082
R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080
R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210
FS:  00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040)
Stack:
 ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e
 ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993
 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200
Call Trace:
 [<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile]
 [<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile]
 [<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile]
 [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f
 [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b
Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81
 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b
RIP  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
 RSP <ffff88041de1de98>
CR2: 0000000000000008
---[ end trace 06d4e95b6aa3b437 ]---

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

jump_label: jump_label_inc may return before the code is patched

commit bbbf7af4bf8fc69bc751818cf30521080fa47dcb upstream.

If cpu A calls jump_label_inc() just after atomic_add_return() is
called by cpu B, atomic_inc_not_zero() will return value greater then
zero and jump_label_inc() will return to a caller before jump_label_update()
finishes its job on cpu B.

Link: http://lkml.kernel.org/r/20111018175551.GH17571@redhat.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

perf: Fix parsing of __print_flags() in TP_printk()

commit d06c27b22aa66e48e32f03f9387328a9af9b0625 upstream.

A update is made to the sched:sched_switch event that adds some
logic to the first parameter of the __print_flags() that shows the
state of tasks. This change cause perf to fail parsing the flags.

A simple fix is needed to have the parser be able to process ops
within the argument.

Reported-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tick-broadcast: Stop active broadcast device when replacing it

commit c1be84309c58b1e7c6d626e28fba41a22b364c3d upstream.

When a better rated broadcast device is installed, then the current
active device is not disabled, which results in two running broadcast
devices.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tracing: fix event_subsystem ref counting

commit cb59974742aea24adf6637eb0c4b8e7b48bca6fb upstream.

Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.

Ref_count was added to keep track of subsystem users, not for counting
events.  Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that.  Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rtc: Disable the alarm in the hardware

commit c0afabd3d553c521e003779c127143ffde55a16f upstream.

Currently, the RTC code does not disable the alarm in the hardware.

This means that after a sequence such as the one below (the files are in the
RTC sysfs), the box will boot up after 2 minutes even though we've
asked for the alarm to be turned off.

# echo $((`cat since_epoch`)+120) > wakealarm
# echo 0 > wakealarm
# poweroff

Fix this by disabling the alarm when there are no timers to run.

Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

trace_events_filter: Use rcu_assign_pointer() when setting ftrace_event_call->filter

commit d3d9acf646679c1981032b0985b386d12fccc60c upstream.

ftrace_event_call->filter is sched RCU protected but didn't use
rcu_assign_pointer().  Use it.

TODO: Add proper __rcu annotation to call->filter and all its users.

-v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric.

Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: fix attr2 vs large data fork assert

commit 4c393a6059f8442a70512a48ce4639b882b6f6ad upstream.

With Dmitry fsstress updates I've seen very reproducible crashes in
xfs_attr_shortform_remove because xfs_attr_shortform_bytesfit claims that
the attributes would not fit inline into the inode after removing an
attribute.  It turns out that we were operating on an inode with lots
of delalloc extents, and thus an if_bytes values for the data fork that
is larger than biggest possible on-disk storage for it which utterly
confuses the code near the end of xfs_attr_shortform_bytesfit.

Fix this by always allowing the current attribute fork, like we already
do for the attr1 format, given that delalloc conversion will take care
for moving either the data or attribute area out of line if it doesn't
fit at that point - or making the point moot by merging extents at this
point.

Also document the function better, and clean up some loose bits.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: force buffer writeback before blocking on the ilock in inode reclaim

commit 4dd2cb4a28b7ab1f37163a4eba280926a13a8749 upstream.

If we are doing synchronous inode reclaim we block the VM from making
progress in memory reclaim.  So if we encouter a flush locked inode
promote it in the delwri list and wake up xfsbufd to write it out now.
Without this we can get hangs of up to 30 seconds during workloads hitting
synchronous inode reclaim.

The scheme is copied from what we do for dquot reclaims.

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Ben Myers <bpm@sgi.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xfs: validate acl count

commit fa8b18edd752a8b4e9d1ee2cd615b82c93cf8bba upstream.

This prevents in-memory corruption and possible panics if the on-disk
ACL is badly corrupted.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

NFS: Prevent 3.0 from crashing if it receives a partial layout

This is a backport of critical parts of
commit 7c24d9489f "NFSv4.1: File layout only supports whole file layouts"

It prevents the file layout driver from (incorrectly) using
partial layouts, but ignores the part of the referenced commmit that
relies on additional machinery to change the LAYOUTGET request
based on layout driver.

Signed-off-by: Fred Isaman <iisaman@netapp.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

genirq: Fix race condition when stopping the irq thread

commit 550acb19269d65f32e9ac4ddb26c2b2070e37f1c upstream.

In irq_wait_for_interrupt(), the should_stop member is verified before
setting the task's state to TASK_INTERRUPTIBLE and calling schedule().
In case kthread_stop sets should_stop and wakes up the process after
should_stop is checked by the irq thread but before the task's state
is changed, the irq thread might never exit:

kthread_stop                    irq_wait_for_interrupt
------------                    ----------------------

                                 ...
...                              while (!kthread_should_stop()) {
kthread->should_stop = 1;
wake_up_process(k);
wait_for_completion(&kthread->exited);
...
                                     set_current_state(TASK_INTERRUPTIBLE);

                                     ...

                                     schedule();
                                 }

Fix this by checking if the thread should stop after modifying the
task's state.

[ tglx: Simplified it a bit ]

Signed-off-by: Ido Yariv <ido@wizery.com>
Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cfg80211: amend regulatory NULL dereference fix

commit 0bac71af6e66dc798bf07d0c0dd14ee5503362f9 upstream.

Johannes' patch for "cfg80211: fix regulatory NULL dereference"
broke user regulaotry hints and it did not address the fact that
last_request was left populated even if the previous regulatory
hint was stale due to the wiphy disappearing.

Fix user reguluatory hints by only bailing out if for those
regulatory hints where a request_wiphy is expected. The stale last_request
considerations are addressed through the previous fixes on last_request
where we reset the last_request to a static world regdom request upon
reset_regdomains(). In this case though we further enhance the effect
by simply restoring reguluatory settings completely.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cfg80211: fix race on init and driver registration

commit a042994dd377d86bff9446ee76151ceb6267c9ba upstream.

There is a theoretical race that if hit will trigger
a crash. The race is between when we issue the first
regulatory hint, regulatory_hint_core(), gets processed
by the workqueue and between when the first device
gets registered to the wireless core. This is not easy
to reproduce but it was easy to do so through the
regulatory simulator I have been working on. This
is a port of the fix I implemented there [1].

[1] https://github.com/mcgrof/regsim/commit/a246ccf81f059cb662eee288aa13100f631e4cc8

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

add missing .set function for NT_S390_LAST_BREAK regset

commit b934069c991355d27a053a932591c77960f4e414 upstream.

The last breaking event address is a read-only value, the regset misses the
.set function. If a PTRACE_SETREGSET is done for NT_S390_LAST_BREAK we
get an oops due to a branch to zero:

Kernel BUG at 0000000000000002 verbose debug info unavailable
illegal operation: 0001 #1 SMP
...
Call Trace:
(<0000000000158294> ptrace_regset+0x184/0x188)
 <00000000001595b6> ptrace_request+0x37a/0x4fc
 <0000000000109a78> arch_ptrace+0x108/0x1fc
 <00000000001590d6> SyS_ptrace+0xaa/0x12c
 <00000000005c7a42> sysc_noemu+0x16/0x1c
 <000003fffd5ec10c> 0x3fffd5ec10c
Last Breaking-Event-Address:
 <0000000000158242> ptrace_regset+0x132/0x188

Add a nop .set function to prevent the branch to zero.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

oprofile, x86: Fix crash when unloading module (nmi timer mode)

commit 97f7f8189fe54e3cfe324ef9ad35064f3d2d3bff upstream.

If oprofile uses the nmi timer interrupt there is a crash while
unloading the module. The bug can be triggered with oprofile build as
module and kernel parameter nolapic set. This patch fixes this.

oprofile: using NMI timer interrupt.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
PGD 42dbca067 PUD 41da6a067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
CPU 5
Modules linked in: oprofile(-) [last unloaded: oprofile]

Pid: 2518, comm: modprobe Not tainted 3.1.0-rc7-00019-gb2fb49d #19 Advanced Micro Device Anaheim/Anaheim
RIP: 0010:[<ffffffff8123c226>]  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
RSP: 0018:ffff88041ef71e98  EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffffffa0017100 RCX: dead000000200200
RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620
RBP: ffff88041ef71ea8 R08: 0000000000000001 R09: 0000000000000082
R10: 0000000000000000 R11: ffff88041ef71de8 R12: 0000000000000080
R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210
FS:  00007fc902f20700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 000000041cdb6000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2518, threadinfo ffff88041ef70000, task ffff88041d348040)
Stack:
 ffff88041ef71eb8 ffffffffa0017790 ffff88041ef71eb8 ffffffffa0013532
 ffff88041ef71ec8 ffffffffa00132d6 ffff88041ef71ed8 ffffffffa00159b2
 ffff88041ef71f78 ffffffff81073115 656c69666f72706f 0000000000610200
Call Trace:
 [<ffffffffa0013532>] op_nmi_exit+0x15/0x17 [oprofile]
 [<ffffffffa00132d6>] oprofile_arch_exit+0xe/0x10 [oprofile]
 [<ffffffffa00159b2>] oprofile_exit+0x1e/0x20 [oprofile]
 [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f
 [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b
Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81
 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b
RIP  [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58
 RSP <ffff88041ef71e98>
CR2: 0000000000000008
---[ end trace 43a541a52956b7b0 ]---

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

perf/x86: Fix PEBS instruction unwind

commit 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac upstream.

Masami spotted that we always try to decode the instruction stream as
64bit instructions when running a 64bit kernel, this doesn't work for
ia32-compat proglets.

Use TIF_IA32 to detect if we need to use the 32bit instruction
decoder.

Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode

commit 2cd1c8d4dc7ecca9e9431e2dabe41ae9c7d89e51 upstream.

Fix an outstanding issue that has been reported since 2.6.37.
Under a heavy loaded machine processing "fork()" calls could
crash with:

BUG: unable to handle kernel paging request at f573fc8c
IP: [<c01abc54>] swap_count_continued+0x104/0x180
*pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP
Modules linked in:
Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1
EIP: 0061:[<c01abc54>] EFLAGS: 00210246 CPU: 3
EIP is at swap_count_continued+0x104/0x180
.. snip..
Call Trace:
 [<c01ac222>] ? __swap_duplicate+0xc2/0x160
 [<c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0
 [<c01ac2e4>] ? swap_duplicate+0x14/0x40
 [<c01a0a6b>] ? copy_pte_range+0x45b/0x500
 [<c01a0ca5>] ? copy_page_range+0x195/0x200
 [<c01328c6>] ? dup_mmap+0x1c6/0x2c0
 [<c0132cf8>] ? dup_mm+0xa8/0x130
 [<c013376a>] ? copy_process+0x98a/0xb30
 [<c013395f>] ? do_fork+0x4f/0x280
 [<c01573b3>] ? getnstimeofday+0x43/0x100
 [<c010f770>] ? sys_clone+0x30/0x40
 [<c06c048d>] ? ptregs_clone+0x15/0x48
 [<c06bfb71>] ? syscall_call+0x7/0xb

The problem is that in copy_page_range() we turn lazy mode on,
and then in swap_entry_free() we call swap_count_continued()
which ends up in:

         map = kmap_atomic(page, KM_USER0) + offset;

and then later we touch *map.

Since we are running in batched mode (lazy) we don't actually
set up the PTE mappings and the kmap_atomic is not done
synchronously and ends up trying to dereference a page that has
not been set.

Looking at kmap_atomic_prot_pfn(), it uses
'arch_flush_lazy_mmu_mode' and doing the same in
kmap_atomic_prot() and __kunmap_atomic() makes the problem go
away.

Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy
mode in interrupts") removed part of this to fix an interrupt
issue - but it went to far and did not consider this scenario.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86: Fix "Acer Aspire 1" reboot hang

commit 1ef03890969932e9359b9a4c658f7f87771910ac upstream.

Looks like on some Acer Aspire 1s with older bioses, reboot via bios
fails.  It works on my machine, (with BIOS version 0.3310) but
not on some others (BIOS version 0.3309).

There's a log of problems at:

  https://bbs.archlinux.org/viewtopic.php?id=124136

This patch adds a different callback to the reboot quirk table,
to allow rebooting via keybaord controller.

Reported-by: Uroš Vampl <mobile.leecher@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

x86/mpparse: Account for bus types other than ISA and PCI

commit 9e6866686bdf2dcf3aeb0838076237ede532dcc8 upstream.

In commit f8924e770e04 ("x86: unify mp_bus_info"), the 32-bit
and 64-bit versions of MP_bus_info were rearranged to match each
other better.  Unfortunately it introduced a regression: prior
to that change we used to always set the mp_bus_not_pci bit,
then clear it if we found a PCI bus.  After it, we set
mp_bus_not_pci for ISA buses, clear it for PCI buses, and leave
it alone otherwise.

In the cases of ISA and PCI, there's not much difference.  But
ISA is not the only non-PCI bus, so it's better to always set
mp_bus_not_pci and clear it only for PCI.

Without this change, Dan's Dell PowerEdge 4200 panics on boot
with a log indicating interrupt routing trouble unless the
"noapic" option is supplied.  With this change, the machine
boots reliably without "noapic".

Fixes http://bugs.debian.org/586494

Reported-bisected-and-tested-by: Dan McGrath <troubledaemon@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dan McGrath <troubledaemon@gmail.com>
Cc: Alexey Starikovskiy <aystarik@gmail.com>
[jrnieder@gmail.com: clarified commit message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Link: http://lkml.kernel.org/r/20111122215000.GA9151@elie.hsd1.il.comcast.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sched, x86: Avoid unnecessary overflow in sched_clock

commit 4cecf6d401a01d054afc1e5f605bcbfe553cb9b9 upstream.

(Added the missing signed-off-by line)

In hundreds of days, the __cycles_2_ns calculation in sched_clock
has an overflow.  cyc * per_cpu(cyc2ns, cpu) exceeds 64 bits, causing
the final value to become zero.  We can solve this without losing
any precision.

We can decompose TSC into quotient and remainder of division by the
scale factor, and then use this to convert TSC into nanoseconds.

Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Reviewed-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111115221121.7262.88871.stgit@dungbeetle.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

xHCI: fix bug in xhci_clear_command_ring()

commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 upstream.

When system enters suspend, xHCI driver clears command ring by writing zero
to all the TRBs. However, this also writes zero to the Link TRB, and the ring
is mangled. This may cause driver accesses wrong memory address and the
result is unpredicted.

When clear the command ring, keep the last Link TRB intact, only clear its
cycle bit. This should fix the "command ring full" issue reported by Oliver
Neukum.

This should be backported to stable kernels as old as 2.6.37, since the
commit 89821320 "xhci: Fix command ring replay after resume" is merged.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

EHCI : Fix a regression in the ISO scheduler

commit e3420901eba65b1c46bed86d360e3a8685d20734 upstream.

Fix a regression that was introduced by commit
811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling
issue with iso transfer).

We detect an error if next == start, but this means uframe 0 can't be allocated
anymore for iso transfer...

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: EHCI: fix HUB TT scheduling issue with iso transfer

commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream.

The current TT scheduling doesn't allow to play and then record on a
full-speed device connected to a high speed hub.

The IN iso stream can only start on the first uframe (0-2 for a 165 us)
because of CSPLIT transactions.
For the OUT iso stream there no such restriction. uframe 0-5 are possible.

The idea of this patch is that the first uframe are precious (for IN TT iso
stream) and we should allocate the last uframes first if possible.

For that we reverse the order of uframe allocation (last uframe first).

Here an example :

hid interrupt stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame | 13  |  0  |  0  |  0  |  0  |  0  |  0  |  0  |
----------------------------------------------------------------------

iso OUT stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame | 13  | 125 |  39 |  0  |  0  |  0  |  0  |  0  |
----------------------------------------------------------------------

There no place for iso IN stream  (uframe 0-2 are used) and we got "cannot
submit datapipe for urb 0, error -28: not enough bandwidth" error.

With the patch this become.

iso OUT stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame |  13 |  0  |  0  |  0  | 125 |  39 |  0  |  0  |
----------------------------------------------------------------------

iso IN stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame |  13 |  0  | 125 | 40  | 125 |  39 |  0  |  0  |
----------------------------------------------------------------------

Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: usb-storage: unusual_devs entry for Kingston DT 101 G2

commit cec28a5428793b6bc64e56687fb239759d6da74e upstream.

Kingston DT 101 G2 replies a wrong tag while transporting, add an
unusal_devs entry to ignore the tag validation.

Signed-off-by: Qinglin Ye <yestyle@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: option: add SIMCom SIM5218

commit ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 upstream.

Tested with SIM5218EVB-KIT evaluation kit.

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: option: add Huawei E353 controlling interfaces

commit 46b1848360c8e634e0b063932a1261062fa0f7d6 upstream.

This patch creates the missing controlling devices for the Huawei E353
HSPA+ stick.

Signed-off-by: Dirk Nehring <dnehring@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb: ftdi_sio: add PID for Propox ISPcable III

commit 307369b0ca06b27b511b61714e335ddfccf19c4f upstream.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

HID: Correct General touch PID

commit b1807719f6acdf18cc4bde3b5400d05d77801494 upstream.

Genera Touch told us that 0001 is their single point device
and 0003 is the multitouch one. Apparently, we made the tests
someone having a prototype, and not the final product.
They said it should be safe to do the switch.

This partially reverts 5572da0 ("HID: hid-mulitouch: add support
for the 'Sensing Win7-TwoFinger'").

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: whci-hcd: fix endian conversion in qset_clear()

commit 8746c83d538cab273d335acb2be226d096f4a5af upstream.

qset->qh.link is an __le64 field and we should be using cpu_to_le64()
to fill it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix signal handling in read and write

commit 6a9ce6b654e491981f6ef7e214cbd4f63e033848 upstream.

After sleeping on a wait queue, signal_pending(current) should be
checked (not before sleeping).

Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix mmap_count

commit df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d upstream.

In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but
it is not incremented at comedi_vm_ops->open. This may result in a negative
counter.  The patch introduces the open method to keep the counter
consistent.

The bug was triggerd by this sample code:

        mmap(0, ...., comedi_fd);
        fork();
        exit(0);

Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix oops for USB DAQ devices.

commit 3ffab428f40849ed5f21bcfd7285bdef7902f9ca upstream.

This fixes kernel oops when an USB DAQ device is plugged out while it's
communicating with the userspace software.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: usbip: bugfix for deadlock

commit 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 upstream.

Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep.
If interrupts are not disabled, it can potentially lead to a deadlock.
The deadlock is readily reproduceable on a slower (ARM based) device
such as the TI Pandaboard.

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

firmware: Sigma: Fix endianess issues

commit bda63586bc5929e97288cdb371bb6456504867ed upstream.

Currently the SigmaDSP firmware loader only works correctly on little-endian
systems. Fix this by using the proper endianess conversion functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

firmware: Sigma: Skip header during CRC generation

commit c56935bdc0a8edf50237d3b0205133a5b0adc604 upstream.

The firmware header is not part of the CRC, so skip it. Otherwise the firmware
will be rejected due to non-matching CRCs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

firmware: Sigma: Prevent out of bounds memory access

commit 4f718a29fe4908c2cea782f751e9805319684e2b upstream.

The SigmaDSP firmware loader currently does not perform enough boundary size
checks when processing the firmware. As a result it is possible that a
malformed firmware can cause an out of bounds memory access.

This patch adds checks which ensure that both the action header and the payload
are completely inside the firmware data boundaries before processing them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: add some loop timeouts in pageflip code

commit f64964796dedca340608fb1075ab6baad5625851 upstream.

Avoid infinite loops waiting for surface updates if a GPU
reset happens while waiting for a page flip.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=43191

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drm/radeon/kms: add some new pci ids

commit 2ed4d9d648cbd4fb1c232a646dbdbdfdd373ca94 upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hugetlb: release pages in the error path of hugetlb_cow()

commit ea4039a34c4c206d015d34a49d0b00868e37db1d upstream.

If we fail to prepare an anon_vma, the {new, old}_page should be released,
or they will leak.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SCSI: Silencing 'killing requests for dead queue'

commit 745718132c3c7cac98a622b610e239dcd5217f71 upstream.

When we tear down a device we try to flush all outstanding
commands in scsi_free_queue(). However the check in
scsi_request_fn() is imperfect as it only signals that
we _might start_ aborting commands, not that we've actually
aborted some.
So move the printk inside the scsi_kill_request function,
this will also give us a hint about which commands are aborted.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

revert "mfd: Fix twl4030 dependencies for audio codec"

This reverts commit 11b8fc6ae54bf18a48c94e181c37ca135b858b42, which was commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream.

Koen Kooi <koen@dominion.thruhere.net> reports that this shouldn't have been applied to the 3.0 kernel as it isn't relevant there, only 3.1.

Reported-by: Koen Kooi <koen@dominion.thruhere.net>
Cc: Thomas Weber <weber@corscience.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: (coretemp) Fix oops on driver load

This is for stable kernel branch 3.0 only. Previous and later versions
have different code paths and are not affected by this bug.

If the CPU microcode is too old, the coretemp driver won't work. But
instead of failing gracefully, it currently oops. Check for NULL
platform device data to avoid this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mac80211: fix race between the AGG SM and the Tx data path

commit 2a1e0fd175dcfd72096ba9291d31e3b1b5342e60 upstream.

When a packet is supposed to sent be as an a-MPDU, mac80211 sets
IEEE80211_TX_CTL_AMPDU to let the driver know. On the other
hand, mac80211 configures the driver for aggregration with the
ampdu_action callback.
There is race between these two mechanisms since the following
scenario can occur when the BA agreement is torn down:

Tx softIRQ   drv configuration
========== =================

check OPERATIONAL bit
Set the TX_CTL_AMPDU bit in the packet

clear OPERATIONAL bit
stop Tx AGG
Pass Tx packet to the driver.

In that case the driver would get a packet with TX_CTL_AMPDU set
although it has already been notified that the BA session has been
torn down.

To fix this, we need to synchronize all the Qdisc activity after we
cleared the OPERATIONAL bit. After that step, all the following
packets will be buffered until the driver reports it is ready to get
new packets for this RA / TID. This buffering allows not to run into
another race that would send packets with TX_CTL_AMPDU unset while
the driver hasn't been requested to tear down the BA session yet.

This race occurs in practice and iwlwifi complains with a WARN_ON
when it happens.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

mac80211: don't stop a single aggregation session twice

commit 24f50a9d165745fd0701c6e089d35f58a229ea69 upstream.

Nikolay noticed (by code review) that mac80211 can
attempt to stop an aggregation session while it is
already being stopped. So to fix it, check whether
stop is already being done and bail out if so.

Also move setting the STOPPING state into the lock
so things are properly atomic.

Reported-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cfg80211: fix regulatory NULL dereference

commit de3584bd62d87b4c250129fbc46ca52c80330add upstream.

By the time userspace returns with a response to
the regulatory domain request, the wiphy causing
the request might have gone away. If this is so,
reject the update but mark the request as having
been processed anyway.

Cc: Luis R. Rodriguez <lrodriguez@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

nl80211: fix MAC address validation

commit e007b857e88097c96c45620bf3b04a4e309053d1 upstream.

MAC addresses have a fixed length. The current
policy allows passing < ETH_ALEN bytes, which
might result in reading beyond the buffer.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

rt2x00: Fix efuse EEPROM reading on PPC32.

commit 68fa64ef606bcee688fce46d07aa68f175070156 upstream.

Fix __le32 to __le16 conversion of the first word of an 8-word block
of EEPROM read via the efuse method.

Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

p54spi: Fix workqueue deadlock

commit 2d1618170eb493d18f66f2ac03775409a6fb97c6 upstream.

priv->work must not be synced while priv->mutex is locked, because
the mutex is taken in the work handler.
Move cancel_work_sync down to after the device shutdown code.
This is safe, because the work handler checks fw_state and bails out
early in case of a race.

Signed-off-by: Michael Buesch <m@bues.ch>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

p54spi: Add missing spin_lock_init

commit 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 upstream.

The tx_lock is not initialized properly. Add spin_lock_init().

Signed-off-by: Michael Buesch <m@bues.ch>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hrtimer: Fix extra wakeups from __remove_hrtimer()

commit 27c9cd7e601632b3794e1c3344d37b86917ffb43 upstream.

__remove_hrtimer() attempts to reprogram the clockevent device when
the timer being removed is the next to expire. However,
__remove_hrtimer() reprograms the clockevent *before* removing the
timer from the timerqueue and thus when hrtimer_force_reprogram()
finds the next timer to expire it finds the timer we're trying to
remove.

This is especially noticeable when the system switches to NOHz mode
and the system tick is removed. The timer tick is removed from the
system but the clockevent is programmed to wakeup in another HZ
anyway.

Silence the extra wakeup by removing the timer from the timerqueue
before calling hrtimer_force_reprogram() so that we actually program
the clockevent for the next timer to expire.

This was broken by 998adc3 "hrtimers: Convert hrtimers to use
timerlist infrastructure".

Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Link: http://lkml.kernel.org/r/1321660030-8520-1-git-send-email-johlstei@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

timekeeping: add arch_offset hook to ktime_get functions

commit d004e024058a0eaca097513ce62cbcf978913e0a upstream.

ktime_get and ktime_get_ts were calling timekeeping_get_ns()
but later they were not calling arch_gettimeoffset() so architectures
using this mechanism returned 0 ns when calling these functions.

This happened for example when running Busybox's ping which calls
syscall(__NR_clock_gettime, CLOCK_MONOTONIC, ts) which eventually
calls ktime_get. As a result the returned ping travel time was zero.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cgroup_freezer: fix freezing groups with stopped tasks

commit 884a45d964dd395eda945842afff5e16bcaedf56 upstream.

2d3cbf8b (cgroup_freezer: update_freezer_state() does incorrect state
transitions) removed is_task_frozen_enough and replaced it with a simple
frozen call. This, however, breaks freezing for a group with stopped tasks
because those cannot be frozen and so the group remains in CGROUP_FREEZING
state (update_if_frozen doesn't count stopped tasks) and never reaches
CGROUP_FROZEN.

Let's add is_task_frozen_enough back and use it at the original locations
(update_if_frozen and try_to_freeze_cgroup). Semantically we consider
stopped tasks as frozen enough so we should consider both cases when
testing frozen tasks.

Testcase:
mkdir /dev/freezer
mount -t cgroup -o freezer none /dev/freezer
mkdir /dev/freezer/foo
sleep 1h &
pid=$!
kill -STOP $pid
echo $pid > /dev/freezer/foo/tasks
echo FROZEN > /dev/freezer/foo/freezer.state
while true
do
cat /dev/freezer/foo/freezer.state
[ "`cat /dev/freezer/foo/freezer.state`" = "FROZEN" ] && break
sleep 1
done
echo OK

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tomasz Buchert <tomasz.buchert@inria.fr>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

genirq: fix regression in irqfixup, irqpoll

commit 52553ddffad76ccf192d4dd9ce88d5818f57f62a upstream.

Commit fa27271bc8d2("genirq: Fixup poll handling") introduced a
regression that broke irqfixup/irqpoll for some hardware configurations.

Amidst reorganizing 'try_one_irq', that patch removed a test that
checked for 'action->handler' returning IRQ_HANDLED, before acting on
the interrupt.  Restoring this test back returns the functionality lost
since 2.6.39.  In the current set of tests, after 'action' is set, it
must precede '!action->next' to take effect.

With this and my previous patch to irq/spurious.c, c75d720fca8a, all
IRQ regressions that I have encountered are fixed.

Signed-off-by: Edward Donovan <edward.donovan@numble.net>
Reported-and-tested-by: Rogério Brito <rbrito@ime.usp.br>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared

commit 24ca9a847791fd53d9b217330b15f3c285827a18 upstream.

By returning '0' instead of 'EAGAIN' when the tests in xs_nospace() fail
to find evidence of socket congestion, we are making the RPC engine believe
that the message was incorrectly sent and so it disconnects the socket
instead of just retrying.

The bug appears to have been introduced by commit
5e3771ce2d6a69e10fcc870cdf226d121d868491 (SUNRPC: Ensure that xs_nospace
return values are propagated).

Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ASoC: Ensure WM8731 register cache is synced when resuming from disabled

commit ed3e80c4c991a52f9fce3421536a78e331ae0949 upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ASoC: wm8753: Skip noop reconfiguration of DAI mode

commit 2391a0e06789a3f1718dee30b282562f7ed28c87 upstream.

This patch makes it possible to set DAI mode to its currently applied
value even if codec is active. This is necessary to allow

aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom &
alsactl store -f backup.state
alsactl restore -f backup.state

to work without returning errors. This patch is based on a patch sent
by Klaus Kurzmann <mok@fluxnetz.de>.

Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>