yxj [Sun, 19 May 2013 07:45:55 +0000 (15:45 +0800)]
board jettaplus:add power deinit for rk616
yxj [Sun, 19 May 2013 07:43:41 +0000 (15:43 +0800)]
mfd:rk616:modify some operation for vif
yxj [Fri, 10 May 2013 09:51:10 +0000 (17:51 +0800)]
rk3188 lcdc: do not call sscreen_set in shutdown
陈金泉 [Sat, 18 May 2013 08:09:28 +0000 (16:09 +0800)]
fix RK616 codec ADC TYPE error
chenxing [Sat, 18 May 2013 05:20:45 +0000 (13:20 +0800)]
rk30xx: pmic: delay 10ms after 32.768K switch to 24M
chenxing [Sat, 18 May 2013 05:17:38 +0000 (13:17 +0800)]
rk3188: fix CORE_CLK_DIV define error
chenxing [Sat, 18 May 2013 05:17:24 +0000 (13:17 +0800)]
rk3066b/rk3168: fix CORE_CLK_DIV define error
邱建斌 [Sat, 18 May 2013 03:47:37 +0000 (11:47 +0800)]
rk30 i2s : modify hdmi inside i2s error
not disable i2s when hdmi inside
xxx [Sat, 18 May 2013 02:26:56 +0000 (10:26 +0800)]
setting gpll 594 cpll 798 for sys stabilization
黄涛 [Sat, 18 May 2013 02:14:35 +0000 (10:14 +0800)]
rk30: pm: use macro for access clksel0
cym [Sat, 18 May 2013 01:11:45 +0000 (09:11 +0800)]
RK2928:resolve compiled ddr.c fail for rk2928
xxx [Fri, 17 May 2013 10:27:40 +0000 (18:27 +0800)]
rk3028 support uart48M
邱建斌 [Fri, 17 May 2013 09:04:31 +0000 (17:04 +0800)]
rk30 i2s : clear format bit when update format
xxx [Fri, 17 May 2013 07:21:29 +0000 (15:21 +0800)]
rk3168 rk3028 change apll setting
xxx [Fri, 17 May 2013 03:43:31 +0000 (11:43 +0800)]
change gpll 384 config
张晴 [Fri, 17 May 2013 02:05:57 +0000 (10:05 +0800)]
rk3168:modify tps65910 dc1 defult voltage 1.2V
ddl [Thu, 16 May 2013 10:40:28 +0000 (18:40 +0800)]
camera: cif:v0.3.5 generic_sensor:v0.1.7
yzq [Thu, 16 May 2013 02:44:23 +0000 (10:44 +0800)]
it66121 hdmi: remove deviceId check because it maybe be changed when the chip upgraded
chenxing [Thu, 16 May 2013 01:56:55 +0000 (09:56 +0800)]
rk3188: chips pll_flag != 0: need to ensure aclk_cpu parent select DO NOT appear high rate
wdc [Wed, 15 May 2013 13:26:46 +0000 (21:26 +0800)]
fix make clean error
xxx [Wed, 15 May 2013 09:05:23 +0000 (17:05 +0800)]
pm.c remove redefine clkgt_regs_sram
kfx [Wed, 15 May 2013 06:50:09 +0000 (14:50 +0800)]
iomux: iomux_switch_gpio_mode
ddl [Wed, 15 May 2013 03:10:14 +0000 (11:10 +0800)]
camera: cif:v0.3.3, generic_sensor:v0.1.5
xuhuicong [Tue, 14 May 2013 10:43:11 +0000 (18:43 +0800)]
add rk616 hdmi roll polling method when hdmi_irq = INVALID_GPIO
陈金泉 [Tue, 14 May 2013 07:51:11 +0000 (15:51 +0800)]
fix codec rk616 I2S format setting error
yzq [Tue, 14 May 2013 06:21:11 +0000 (14:21 +0800)]
rk fb hdmi:fix plug and unplug hdmi,which cause Null pointer
cym [Mon, 13 May 2013 08:40:25 +0000 (16:40 +0800)]
RK3188:ddr_clock select GPLL_2_div if ddr_freq big then 250MHz,
only use for DPLL bad and ddr_clock must select GPLL(800MHz-1000MHz).
zzy [Mon, 13 May 2013 03:49:36 +0000 (11:49 +0800)]
add SEW290 3G modem
chenxing [Mon, 13 May 2013 03:24:41 +0000 (11:24 +0800)]
rk3188: pm.c: optimize soc_is_rk3188plus flag
lintao [Mon, 13 May 2013 02:52:02 +0000 (10:52 +0800)]
WIFI: support mt7601u usb wifi
chenxing [Mon, 13 May 2013 02:20:14 +0000 (10:20 +0800)]
rk: add pll wait lock error dump infomations
chenxing [Mon, 13 May 2013 02:15:39 +0000 (10:15 +0800)]
rk30xx: add lpj_gpll init to prevent dma halt and sdio error
chenxing [Mon, 13 May 2013 01:16:45 +0000 (09:16 +0800)]
rk3188: add lpj_gpll init in clock_data, fix dma halt and sdio error
chenxing [Fri, 10 May 2013 10:06:04 +0000 (18:06 +0800)]
rk3066B: compatible with rk3188 plus pll config, fix compile error
cym [Fri, 10 May 2013 09:56:08 +0000 (17:56 +0800)]
RK3188 :no matter what CPLL or DPLL is bad,DDR_CLOCK select GPLL
wdc [Fri, 10 May 2013 09:56:18 +0000 (17:56 +0800)]
wifi: add rtl8723as
chenxing [Fri, 10 May 2013 09:15:15 +0000 (17:15 +0800)]
rk3188: plus: add power on pll
chenxing [Fri, 10 May 2013 02:22:13 +0000 (10:22 +0800)]
rk: pm_tests: add delayline support
陈金泉 [Thu, 9 May 2013 13:16:21 +0000 (21:16 +0800)]
fix codec set init error
wuhao [Thu, 9 May 2013 08:11:04 +0000 (16:11 +0800)]
rk616 codec: modify power up and down
yxj [Thu, 9 May 2013 07:53:27 +0000 (15:53 +0800)]
mfd:rk616:vif:fix rk616 set vif
yxj [Thu, 9 May 2013 07:43:32 +0000 (15:43 +0800)]
board jettaplus defconfig:add lvds config
yxj [Thu, 9 May 2013 06:21:50 +0000 (14:21 +0800)]
rk3188m tb board:config rk616 lvds
chenxing [Thu, 9 May 2013 06:37:27 +0000 (14:37 +0800)]
rk30xx/rk3168/rk3188: dvfs: nandc delayline break lock status to make sure every time relock
陈金泉 [Thu, 9 May 2013 04:13:26 +0000 (12:13 +0800)]
add setting codec from parameter
wuhao [Thu, 9 May 2013 02:57:29 +0000 (10:57 +0800)]
rk616 codec: adjust the code
yxj [Thu, 9 May 2013 02:41:07 +0000 (10:41 +0800)]
mfd:rk616:vif:disable vif when hdmi remove
yxj [Thu, 9 May 2013 01:10:57 +0000 (09:10 +0800)]
rk3066b lcdc:fix vif support
Zhaoyifeng [Thu, 9 May 2013 02:02:49 +0000 (10:02 +0800)]
MTD:MTD MERGE READ AND WRITE FOR ONE REQ(MAX SIZE 1024KB). ZYF
yxj [Wed, 8 May 2013 13:11:25 +0000 (21:11 +0800)]
board jettaplus:set vcc_io to 3.2v to fix spdif
yxj [Wed, 8 May 2013 13:10:46 +0000 (21:10 +0800)]
screen:lcd b101ew05:fix vif support
yxj [Wed, 8 May 2013 13:10:05 +0000 (21:10 +0800)]
mfd:rk616:hdmi:modify vif set interface
yxj [Wed, 8 May 2013 13:09:10 +0000 (21:09 +0800)]
rk30 rk3188 lcdc:fix vif support
yxj [Wed, 8 May 2013 13:08:29 +0000 (21:08 +0800)]
rk screen:fix vif support
yxj [Wed, 8 May 2013 13:06:46 +0000 (21:06 +0800)]
mfd:rk616:vif:support hdmi only mode
chenxing [Wed, 8 May 2013 11:32:01 +0000 (19:32 +0800)]
rk: pm_test: add maxfreq operation support
wuhao [Wed, 8 May 2013 11:06:12 +0000 (19:06 +0800)]
rk616 codec: optimize the playback, capture processes, to reduce power consumption
陈金泉 [Wed, 8 May 2013 08:50:54 +0000 (16:50 +0800)]
fix codec pop noise
黄涛 [Wed, 8 May 2013 08:17:54 +0000 (16:17 +0800)]
rk3188: add delayline support again
chm [Wed, 8 May 2013 06:18:00 +0000 (14:18 +0800)]
vpu_service: add reg_size check on reg_init
陈金泉 [Tue, 7 May 2013 13:20:37 +0000 (21:20 +0800)]
change for 3188-m codec controls
xxh [Tue, 7 May 2013 12:35:01 +0000 (20:35 +0800)]
1.fix Vodafone K4505 3G dongle USB switch faild
2.Add more VID PID for option driver
xxx [Tue, 7 May 2013 10:02:40 +0000 (18:02 +0800)]
rk3168: uart\sdmmc 48M
yzq [Tue, 7 May 2013 09:35:41 +0000 (17:35 +0800)]
mfd:rk616 hdmi: use vif rebuild signal for hdmi 1080p
yxj [Tue, 7 May 2013 09:26:12 +0000 (17:26 +0800)]
mdf:rk616:vif:set mclk to 12M when vif on
xxx [Tue, 7 May 2013 09:17:31 +0000 (17:17 +0800)]
board-rk3168-tb.c use default pll rate
许盛飞 [Tue, 7 May 2013 08:42:36 +0000 (16:42 +0800)]
charging-displasy: when mode_normal and mode_charge
yxj [Tue, 7 May 2013 08:05:31 +0000 (16:05 +0800)]
mdf:rk616:vif:add vif set for hdmi
yxj [Fri, 3 May 2013 04:24:37 +0000 (12:24 +0800)]
lcd b101uano:support rk616 dual lvds
yxj [Fri, 3 May 2013 04:22:54 +0000 (12:22 +0800)]
mfd:rk616:vif:fix dual lvds support
xxx [Tue, 7 May 2013 06:58:05 +0000 (14:58 +0800)]
remove pm.c rk3188/clock_data.c pirntk
xxx [Tue, 7 May 2013 06:51:45 +0000 (14:51 +0800)]
add uart\sdmmc 48M supporting
黄涛 [Tue, 7 May 2013 06:14:34 +0000 (14:14 +0800)]
Revert "rk3188 plus: add delay line support"
This reverts commit
24903a6bd082bea5d7fb9ce030c72d5feff23a1b.
yzq [Tue, 7 May 2013 03:42:27 +0000 (11:42 +0800)]
rk spdif: support
xxx [Tue, 7 May 2013 03:09:49 +0000 (11:09 +0800)]
cpll\DPLL is not power dn,if rk_pll_flag!=0
chenxing [Tue, 7 May 2013 02:02:28 +0000 (10:02 +0800)]
rk3188 plus: add delay line support
cym [Tue, 7 May 2013 01:42:31 +0000 (09:42 +0800)]
rk3188 plus:add DDR support for rk3188 plus
yzq [Mon, 6 May 2013 13:05:03 +0000 (21:05 +0800)]
Revert "rk3188: spdif support"
This reverts commit
20b654aab5ddc3650aa3bb7d8f5359c43df8567d.
chenxing [Mon, 6 May 2013 13:00:17 +0000 (21:00 +0800)]
rk3188: redefine the interface of getting pll flag
chenxing [Mon, 6 May 2013 10:05:03 +0000 (18:05 +0800)]
rk3188 plus: fix PLUS_PLL_NF_MSK error
xxx [Mon, 6 May 2013 09:45:58 +0000 (17:45 +0800)]
edit div_clk_for_pll_int
陈金泉 [Mon, 6 May 2013 09:06:56 +0000 (17:06 +0800)]
change for route HPOUT playback
chenxing [Mon, 6 May 2013 08:11:00 +0000 (16:11 +0800)]
rk3188 plus: fix PLUS_PLL_NR calc error
kfx [Mon, 6 May 2013 08:06:17 +0000 (16:06 +0800)]
rk30+: fixed i2c_sram bug: (~(con & type)) --> (!(con &type))
yzq [Mon, 6 May 2013 06:22:00 +0000 (14:22 +0800)]
mfd:rk616 hdmi:fix irq respond err
黄涛 [Mon, 6 May 2013 06:55:12 +0000 (14:55 +0800)]
rk3168: cpufreq: check temperature every 1s when in performance mode
黄涛 [Mon, 6 May 2013 05:07:23 +0000 (13:07 +0800)]
rk: efuse: efuse_readregs return the number of bytes read when success
黄涛 [Mon, 6 May 2013 04:07:22 +0000 (12:07 +0800)]
rk: add common efuse support
cym [Mon, 6 May 2013 03:26:24 +0000 (11:26 +0800)]
RK3188:ddr_get_dpll_status only use for RK3188
zsq [Mon, 6 May 2013 00:18:58 +0000 (08:18 +0800)]
fix wake up interrupt error/flag error
cym [Sat, 4 May 2013 09:24:30 +0000 (17:24 +0800)]
rk3188: DDR clock add gpll instead dpll support
luowei [Sat, 4 May 2013 09:24:02 +0000 (17:24 +0800)]
sensor:improve kxtik driver compatibility
gwl [Sat, 4 May 2013 09:16:21 +0000 (17:16 +0800)]
add rtl8189es wifi support.
chenxing [Sat, 4 May 2013 09:08:05 +0000 (17:08 +0800)]
rk3188: add gpll instead cpll/dpll support
chenxing [Sat, 4 May 2013 09:07:05 +0000 (17:07 +0800)]
rk: dvfs fix round bug
chenxing [Sat, 4 May 2013 08:51:19 +0000 (16:51 +0800)]
rk3188: add efuse memory map support
wdc [Sat, 4 May 2013 03:50:50 +0000 (11:50 +0800)]
add rda587x device register
wdc [Sat, 4 May 2013 03:46:48 +0000 (11:46 +0800)]
760: remove rfkill-rf config
wdc [Sat, 4 May 2013 02:12:08 +0000 (10:12 +0800)]
rda5876 bt: update driver for android4.2
chm [Sat, 4 May 2013 01:55:01 +0000 (09:55 +0800)]
vpu_service: fix huawei debug signal error
projects / firefly-linux-kernel-4.4.55.git / log