From 01b6722fdf65a91d588338e5a1964d57fa2dd590 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 15 Oct 2015 15:48:26 -0400 Subject: [PATCH] clk: iproc: Add PWRCTRL support Some iProc SoC clocks use a different way to control clock power, via the PWRDWN bit in the PLL control register. Since the PLL control register is used to access the PWRDWN bit, there is no need for the pwr_base when this is being used. A new flag, IPROC_CLK_EMBED_PWRCTRL, has been added to identify this usage. We can use the AON interface to write the values to enable/disable PWRDOWN. Signed-off-by: Jon Mason [sboyd@codeaurora.org: Remove useless parentheses] Signed-off-by: Stephen Boyd --- drivers/clk/bcm/clk-iproc-pll.c | 55 +++++++++++++++++++++++---------- drivers/clk/bcm/clk-iproc.h | 6 ++++ 2 files changed, 44 insertions(+), 17 deletions(-) diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index 2dda4e8295a9..e27acb9c655c 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -148,14 +148,25 @@ static void __pll_disable(struct iproc_pll *pll) writel(val, pll->asiu_base + ctrl->asiu.offset); } - /* latch input value so core power can be shut down */ - val = readl(pll->pwr_base + ctrl->aon.offset); - val |= (1 << ctrl->aon.iso_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); - - /* power down the core */ - val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); + if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { + val = readl(pll->pll_base + ctrl->aon.offset); + val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; + writel(val, pll->pll_base + ctrl->aon.offset); + + if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK)) + readl(pll->pll_base + ctrl->aon.offset); + } + + if (pll->pwr_base) { + /* latch input value so core power can be shut down */ + val = readl(pll->pwr_base + ctrl->aon.offset); + val |= 1 << ctrl->aon.iso_shift; + writel(val, pll->pwr_base + ctrl->aon.offset); + + /* power down the core */ + val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); + writel(val, pll->pwr_base + ctrl->aon.offset); + } } static int __pll_enable(struct iproc_pll *pll) @@ -163,11 +174,22 @@ static int __pll_enable(struct iproc_pll *pll) const struct iproc_pll_ctrl *ctrl = pll->ctrl; u32 val; - /* power up the PLL and make sure it's not latched */ - val = readl(pll->pwr_base + ctrl->aon.offset); - val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; - val &= ~(1 << ctrl->aon.iso_shift); - writel(val, pll->pwr_base + ctrl->aon.offset); + if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { + val = readl(pll->pll_base + ctrl->aon.offset); + val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); + writel(val, pll->pll_base + ctrl->aon.offset); + + if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK)) + readl(pll->pll_base + ctrl->aon.offset); + } + + if (pll->pwr_base) { + /* power up the PLL and make sure it's not latched */ + val = readl(pll->pwr_base + ctrl->aon.offset); + val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; + val &= ~(1 << ctrl->aon.iso_shift); + writel(val, pll->pwr_base + ctrl->aon.offset); + } /* certain PLLs also need to be ungated from the ASIU top level */ if (ctrl->flags & IPROC_CLK_PLL_ASIU) { @@ -610,9 +632,8 @@ void __init iproc_pll_clk_setup(struct device_node *node, if (WARN_ON(!pll->pll_base)) goto err_pll_iomap; + /* Some SoCs do not require the pwr_base, thus failing is not fatal */ pll->pwr_base = of_iomap(node, 1); - if (WARN_ON(!pll->pwr_base)) - goto err_pwr_iomap; /* some PLLs require gating control at the top ASIU level */ if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) { @@ -695,9 +716,9 @@ err_pll_register: iounmap(pll->asiu_base); err_asiu_iomap: - iounmap(pll->pwr_base); + if (pll->pwr_base) + iounmap(pll->pwr_base); -err_pwr_iomap: iounmap(pll->pll_base); err_pll_iomap: diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h index d834b7abd5c6..ff7bfad48c13 100644 --- a/drivers/clk/bcm/clk-iproc.h +++ b/drivers/clk/bcm/clk-iproc.h @@ -48,6 +48,12 @@ */ #define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4) +/* + * Some PLLs use a different way to control clock power, via the PWRDWN bit in + * the PLL control register + */ +#define IPROC_CLK_EMBED_PWRCTRL BIT(5) + /* * Parameters for VCO frequency configuration * -- 2.34.1