From 023a0175ad4beaa14b303e133963c971ad31c338 Mon Sep 17 00:00:00 2001 From: Dan McGee Date: Wed, 7 Sep 2011 11:23:18 -0500 Subject: [PATCH] pata_sis: extract a sis_port_base() method This is similar to the existing sis_old_port_base() method. We do this same calculation and logic in multiple places (with one more to come in a future patch), so extracting it into a method makes sense. Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Dan McGee Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 46 +++++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 18 deletions(-) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 533f2aefab87..10af293b1c6f 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -88,6 +88,29 @@ static int sis_old_port_base(struct ata_device *adev) return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); } +/** + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 reg54; + + /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + + return port + (8 * ap->port_no) + (4 * adev->devno); +} + /** * sis_133_cable_detect - check for 40/80 pin * @ap: Port @@ -266,9 +289,8 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = 0x40; + int port; u32 t1; - u32 reg54; int speed = adev->pio_mode - XFER_PIO_0; const u32 timing133[] = { @@ -288,12 +310,7 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) sis_set_fifo(ap, adev); - /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ - pci_read_config_dword(pdev, 0x54, ®54); - if (reg54 & 0x40000000) - port = 0x70; - port += 8 * ap->port_no + 4 * adev->devno; - + port = sis_port_base(adev); pci_read_config_dword(pdev, port, &t1); t1 &= 0xC0C00FFF; /* Mask out timing */ @@ -465,21 +482,14 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int speed = adev->dma_mode - XFER_MW_DMA_0; - int port = 0x40; + int port; u32 t1; - u32 reg54; /* bits 4- cycle time 8 - cvs time */ static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; - /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */ - pci_read_config_dword(pdev, 0x54, ®54); - if (reg54 & 0x40000000) - port = 0x70; - port += (8 * ap->port_no) + (4 * adev->devno); - + port = sis_port_base(adev); pci_read_config_dword(pdev, port, &t1); if (adev->dma_mode < XFER_UDMA_0) { @@ -487,7 +497,7 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) /* FIXME: need data sheet to add MWDMA here. Also lacking on ide/pci driver */ } else { - speed = adev->dma_mode - XFER_UDMA_0; + int speed = adev->dma_mode - XFER_UDMA_0; /* if & 8 no UDMA133 - need info for ... */ t1 &= ~0x00000FF0; t1 |= 0x00000004; -- 2.34.1